وظائف مهندس تخطيط - البصره العراق

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<ul><li><p>Lead integrated planning, development studies, and economic evaluations.</p></li><li><p>Support investment decisions and long-term business strategy.</p></li><li><p>Coordinate multidisciplinary teams and key stakeholders.</p></li><li><p>Manage short-, medium-, and long-term planning processes.</p></li><li><p>Deliver strategic exercises, budgets, and investment cases.</p></li><li><p>Ensure alignment of development studies with standards and objectives.</p></li><li><p>Support technical and economic evaluations for projects and assets.</p></li><li><p>Represent the company with partners and authorities.</p></li><li><p>Monitor performance, costs, planning, and environmental indicators.</p></li><li><p>Lead team development and capability building.</p></li><li><p>Ensure HSE compliance and confidentiality of strategic information.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><p>Master’s degree in Engineering or equivalent.</p></li><li><p>15–20 years of experience in the oil and gas industry with strong technical expertise.</p></li><li><p>Strong knowledge of field development, reservoirs, projects, and economics.</p></li><li><p>Experience in integrated planning and strategic decision-making.</p></li><li><p>Ability to influence investment and development strategies.</p></li><li><p>Strong coordination, communication, and stakeholder management skills.</p></li><li><p>Ability to lead multidisciplinary teams and drive alignment.</p></li><li><p>Strategic thinking and strong decision-making capabilities.</p></li><li><p>Experience with international standards and multinational organizations.</p></li><li><p>Ability to operate effectively in multicultural environments.</p></li><li><p>Fluent in English and Arabic (mandatory); French is an advantage.&nbsp;</p></li></ul>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Division:</strong> CSSP (Ratawi Hub – Iraq)<br> <strong>Direction:</strong> PCM</p> <h4>Situation in organization</h4> <p>The Reporting Engineer position is within the Project Control Organization of the project reporting to the Planning & Reporting Manager.</p> <h4>Job dimensions</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics.</p> <p>In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment.</p> <p>The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.</p> <p>Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr.</p> <p>The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process.</p> <p>The budget of the WIP is circa $3 billion.</p> <p>The Reporting Engineer is expected to commence duties in the 3rd quarter of 2026 and will be based in Basra.</p> <h4>Activities</h4> <p><strong>1- Reporting & Analysis</strong><br> <li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.).</li> <li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries.</li> <li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates.</li> <li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li> <li>Ensure consistency and traceability of reporting documentation across all project phases.</li></p> <p><strong>2- HSE & Risk Reporting</strong><br> <li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams.</li> <li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting.</li> <li>Assist in compiling and presenting periodic risk assessments and mitigation tracking.</li></p> <p><strong>3- Systems & Tools</strong><br> <li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports.</li> <li>Ensure data integrity and alignment between planning, cost control, and reporting systems.</li></p> <p><strong>4- Documentation & Compliance</strong><br> <li>Ensure compliance with TotalEnergies, BOC, and project standards for reporting procedures.</li> <li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation.</li> <li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.</li></p> <p><strong>5- Information Management & Digitalization</strong><br> <li>Lead project information management and digitalization activities.</li> <li>Supervise the Information Management Assistant and oversee project information, data, and records management.</li> <li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders.</li> <li>Coordinate information exchange between Company and Contractors.</li> <li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems.</li> <li>Develop and maintain project data repositories, dashboards, and reporting systems.</li></p> <h4>Context and environment</h4> <p>TotalEnergies is acting as contractor to BOC. After the completion of the project, the facilities will be handed over to BOC for operation.</p> <h4>Accountabilities</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision-making across all stakeholders.</p> <h4>Qualifications / Experience required</h4> <li>Degree in engineering, data analytics, or related field.</li> <li>Minimum 5 years of experience in project reporting within large-scale industrial or oil & gas projects.</li> <li>Strong analytical and data visualization skills.</li> <li>Proficiency in reporting tools (Power BI, Excel, Word, PowerPoint, etc.).</li> <li>Experience in information management or project data management.</li> <li>Understanding of data governance and information quality principles.</li> <li>Good communication and organizational skills.</li> <li>Ability to work in a multicultural and high-pressure environment.</li> <li>Experience in engineering/construction commercial or contracts administration role.</li> <li>Ability to listen to and understand the signals and queries from various interlocutors.</li> <li>Languages: English is mandatory; knowledge of French and Arabic is a plus.</li></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The site planning engineer is responsible for developing and managing site planning activities to ensure that the project is completed on time and within budget. This role involves coordinating with multidisciplinary teams during the FEED and design phases, focusing on onshore and brownfield projects. The site planning engineer will play a crucial role in implementing effective planning strategies, ensuring resource optimization, and mitigating risks associated with site operations.</p> <h4>Job responsibilities</h4> <li>Develop and maintain detailed project schedules using suitable project management software.</li> <li>Collaborate with engineering, construction, and procurement teams to assess project requirements and ensure alignment with project scope.</li> <li>Perform risk analysis and assessment to identify potential issues in project execution and propose corrective actions.</li> <li>Monitor project progress and report regularly to senior management and project stakeholders.</li> <li>Facilitate site assessments and prepare relevant reports to support decision-making processes.</li> <li>Ensure compliance with safety regulations and promote a culture of safety on-site.</li> <li>Maintain effective communication with all project stakeholders and foster strong working relationships.</li> <li>Participate in project meetings, providing insights on planning and scheduling aspects.</li> <li>Contribute to continuous improvement efforts by proposing innovative planning solutions and methodologies.</li> <li>Assist in the development of progress reports and other documentation as required by project management.</li> <h4>Functional responsibilities</h4> <li>Implementing site logistics and resource plans, considering workforce and construction equipment requirements.</li> <li>Coordinating with the engineering team to integrate design changes into the project schedule effectively.</li> <li>Evaluating and monitoring subcontractor performance in relation to planning and execution benchmarks.</li> <li>Preparing and analyzing variance reports to identify schedule delays or inefficiencies.</li> <h4>Technical skills</h4> <li>Proficient in project scheduling software (e.g., Primavera P6, MS Project).</li> <li>Strong understanding of project management principles, methodologies, and tools.</li> <li>Familiarity with FEED (Front-End Engineering Design) processes and brownfield project challenges.</li> <li>Ability to read and interpret engineering drawings and specifications.</li> <li>Competent in risk management and mitigation strategies.</li> <h4>Soft skills</h4> <li>Excellent communication and interpersonal skills to work collaboratively with diverse teams.</li> <li>Strong analytical and problem-solving abilities.</li> <li>Proactive attitude and ability to work under tight deadlines and pressure.</li> <li>Strong organizational skills and attention to detail.</li> <h4>Qualification</h4> <p>Must have 10 years of experience in site planning and project controls.</p> <p><strong>Mandatory:</strong></p> <li>Bachelor’s degree in engineering in related field from reputed university.</li> <p><strong>Good to have:</strong></p> <li>Master’s degree in engineering in related field from reputed university.</li> <h4>Work environment</h4> <li>The role will primarily be based on-site in Iraq, requiring a commitment to a dynamic and fast-paced work environment. The position may involve working in varying weather conditions and adhering to local health and safety regulations.</li> <li>Flexibility in working hours may be required to accommodate project demands and deadlines.</li></p><p></p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <p>KBR is looking for a Risk Coordinator to be based in Basra, Iraq – daily commute.</p> <p>The role is responsible for coordinating project risk management activities and supporting schedule integration across the project.</p> <h4>Accountability</h4> <p>The Schedule & Risk Coordinator is accountable for maintaining an effective Project Risk Management process, coordinating risk mitigation activities, and ensuring alignment of interface schedules and milestones across the CSSP Project. The role supports integration between WIP and Pipeline Project schedules, follows execution progress from the field, and provides reliable information to support project decision-making. The position serves as backup to the Planning Engineer when required; however, ownership of the Integrated Project Schedule, schedule development, forecasting, and baseline control remains with the Planning Engineer.</p> <h4>Qualifications/Experience required</h4> <ul> <li>Bachelor's degree in Engineering, Project Management, Construction Management, Risk Management, or a related discipline.</li> <li>Minimum 7-10 years of experience in Project Controls, Construction Planning, Risk Management, or Project Execution within major Oil & Gas, Energy, Infrastructure, or EPC projects.</li> <li>Extensive field construction experience with direct involvement in site execution, construction sequencing, workfront planning, contractor performance monitoring, and multidisciplinary team coordination.</li> <li>Proven experience in developing, maintaining, and challenging Project Risk Registers, risk assessments, mitigation plans, and risk management processes.</li> <li>Demonstrated experience in schedule integration, interface management, and coordination of critical milestones across multiple contractors, stakeholders, and project packages.</li> <li>Demonstrated ability to identify, assess, and mitigate construction, logistics, procurement, interface, and country-specific project risks.</li> <li>Proven ability to independently challenge contractor schedules, risk assessments, mitigation strategies, and execution plans through analytical review and field verification.</li> <li>Experience facilitating risk workshops and coordinating mitigation actions with risk owners and project stakeholders.</li> <li>Experience working in complex multi-contractor execution environments, including large-scale brownfield and greenfield developments.</li> <li>Ability to provide risk-based assessments and construction-driven recommendations to support project management decision-making.</li> </ul> <h4>Technical Skills</h4> <ul> <li>Strong knowledge of project risk management methodologies, quantitative and qualitative risk assessment techniques, and risk reporting systems.</li> <li>Strong understanding of construction execution processes, construction sequencing, work packaging, site productivity, and contractor performance monitoring.</li> <li>Strong capability to evaluate construction readiness, identify execution constraints, and assess impacts on project milestones and critical paths.</li> <li>Proficient in Primavera P6 and schedule analysis techniques, including critical path analysis, float consumption, schedule risk assessment, and recovery planning.</li> </ul> <h4>Personal Competencies</h4> <ul> <li>Strong analytical and problem-solving skills.</li> <li>Strong coordination and stakeholder management capabilities.</li> <li>Excellent communication and facilitation skills.</li> <li>Ability to interact effectively with engineering, construction, contractor, PMC, and project management teams.</li> <li>Strong organizational and follow-up skills with attention to detail.</li> <li>Ability to work in a multicultural and fast-paced project environment.</li> <li>Languages: English is mandatory, knowledge of French and Arabic is a plus.</li> </ul> <p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>

<p><h4>Overview</h4> <p>As maintenance advisor, you will play a key role in enabling safe, reliable, and efficient maintenance execution at site. Acting as the main interface between the ROO and BOC maintenance teams and site operations, you will guide priorities, coach national staff, and ensure effective work management. Your influence, collaboration, and technical leadership will support timely execution of planned and unplanned maintenance while ensuring strong safety and compliance standards.</p> <h4>Key responsibilities</h4> <strong>Leadership</strong><br> <p>Promotes a culture of open safety reporting, continuous improvement, and shared respect across a diverse workforce. Encourages team engagement and promotes accountability aligned with ROO’s values and behaviours.</p> <strong>Risk / Operating discipline</strong><br> <p>Accountable for the safe execution of all maintenance activities, ensuring strict adherence to safety standards and risk management protocols. Maintains zero tolerance for overdue maintenance, particularly SCEs and anomalies, and ensures high-quality deferral processes.</p> <strong>Maintenance execution</strong><br> <p>Accountable for effective and efficient asset maintenance across multi-discipline activities, including preventive (PM) and corrective maintenance (CM). Conducts daily validation and maintenance planning meetings to ensure timely prioritization and approval of work. Leads compliance with standardized work management processes, including deferral management and risk mitigation. Oversees contractor-executed tasks by reviewing CTRs for scope quality, cost, resource utilization, materials, and duration. Manages scaffolding needs by initiating requests and ensuring prompt dismantling after completion. Maintains up-to-date records in the O&M tracker and supports reporting accuracy. Owns and maintains the ROO choke model for assigned sites to ensure plant vulnerabilities are understood, tracked, and addressed. Drives plant and equipment availability and supports reliability improvement initiatives, ensuring RCFA actions are followed through to closure.</p> <strong>People</strong><br> <p>Coaches and develops direct reports to support the nationalisation agenda, ensuring timely delivery of personal development plans aligned with the nationalisation plan.</p> <strong>Delivery, optimization & reliability</strong><br> <p>Recommends execution optimization opportunities to the METL and manages the 12-week maintenance activity schedule, deciding what enters the 2-week execution window. Ensures nesting of activities and addresses risks before scheduling, supports timely change management (MOC) and engineering queries to meet business objectives. Assists operations in returning plant to safe operation post-interventions, ensuring timely closeout of GOC paperwork, walkdowns, and PSSR sign-offs. Champions continuous improvement by standardizing best practices, optimizing maintenance strategy, materials staging, and maintenance build. Inputs and manages maintenance budgets for site TAR and train outages.</p> <h4>Experience, qualifications & key skills</h4> <ul> <li>Over 15 years’ oil & gas experience, ideally with IOCs</li> <li>Technical degree or HNC in engineering</li> <li>Previous experience in maintenance lead or superintendent roles</li> <li>Strong knowledge of maintenance planning, scheduling, and CMMS (Maximo)</li> <li>Proven leadership of multi-discipline, multicultural teams</li> <li>Skilled in hazard identification, communication, and priority setting</li> <li>Results-driven with focus on continuous improvement</li> <li>Experience in diverse, multilingual environments preferred</li> </ul> <h4>Interfaces</h4> <p>Collaborate closely with maintenance execution team leader, scheduler, coordinators, work prep specialists, site operations, planning, BOC execution teams, OTL, operations and discipline advisors, service providers, PSCM/materials, and HSE teams to ensure safe, efficient completion of maintenance activities, projects, and emergencies.</p> <h4>Procedures and processes</h4> <p>The MA must have strong knowledge of key ROO procedures including work management & CMMS (with deferral process), activity planning and scheduling, CTR procedures, control of work (HWNF, ORA, SORA, containment, ground disturbance, CSE), MOC/EQ process, and GOC.</p> <h4>Summary of decision rights</h4> <p>The MA is responsible for stopping unsafe work or plant operations (with escalation to the site engineer or higher when necessary), recommends priority maintenance tasks to ensure safety and reliability, decides which activities enter the 2-week execution schedule, supports MC competency development, contributes to vulnerability assessments, and advises on prioritization of CoW and SIMOPS.</p> <h4>Meetings to attend</h4> <ul> <li>Daily: Morning maintenance, site engineer prioritization, work order validation, afternoon ops & maintenance meetings</li> <li>Weekly: Team meeting, bi-weekly planning meeting</li> <li>Fortnightly: 12-week schedule meeting</li> <li>Monthly: Vulnerabilities meeting</li> <li>Ad hoc: TAR Bookies Board, TAR Ops, Projects Ops & Safety Review, production losses, and other required meetings</li> </ul></p><p></p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p><h4>Petroleum engineer (reservoir)</h4> <p>Under direct supervision, this position is responsible for all phases of planning and execution on a small project or may be responsible for a segment of a larger project.</p> <p>Plans, organizes, coordinates, and controls small engineering projects in accordance with the established policies, procedures, systems, and requirements approved by the company.</p> <p>Contributes toward the day to day contact and communication with the client and focuses on providing client satisfaction.</p> <p>Possesses knowledge of the respective industry.</p> <p>Skills are typically acquired through completion of an undergraduate degree in engineering or project management and a minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p></p><p></p>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time. Accountabilities/ Expectations : Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations. Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence. Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a discipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments. 2 This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Provides Managership and guidance to both planning and operational teams. (3) Demonstrates support of the management system (4) Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations. (5) Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals. (6) Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures. (7) Manages operational deviations from Company policy with suitable adherence to the risk assessment process. (8) Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades. (9) Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken. (10) Sets performance targets and implements performance measurement and improvement processes. (11) Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p><h4>Job description: construction e&i lead</h4> <p>The lead construction engineer (E&I) will drive construction readiness, optimize field execution strategies, and ensure effective coordination between engineering, procurement, construction, commissioning, and operations. This position requires a seasoned professional capable of leading multidisciplinary teams and consistently achieving project safety, cost, schedule, and quality objectives.</p> <h4>Accountability / expectations</h4> <ul> <li>Enhance construction safety performance by promoting modularization, standardized assemblies, pre-fabricated E&I modules, and off-site construction to reduce field exposure.</li> <li>Develop brownfield and greenfield construction strategies, including tie-in planning, SIMOPS coordination, shutdown integration, and live-plant execution methodologies.</li> <li>Identify and resolve E&I construction challenges such as cable routing conflicts, hazardous area compliance issues, and instrument accessibility constraints.</li> <li>Monitor field productivity using discipline-specific KPIs (cable pulling rates, termination progress, loop completion curves, energization milestones).</li> <li>Lead construction planning, ensuring detailed sequencing for electrical load transfer, instrument migration, and control system cutover activities.</li> <li>Provide constructability input into electrical single-line diagrams, cable block diagrams, instrument indexes, control system architecture, and hazardous area layouts.</li> <li>Ensure design decisions align with HSE, cost, schedule, and quality requirements, validating field feasibility and installation constraints.</li> <li>Facilitate constructability reviews focused on cable routing, instrument maintainability, equipment lifting constraints, and hazardous area compliance.</li> <li>Serve as the primary E&I construction interface from project inception through field execution.</li> <li>Collaborate with construction management to develop execution plans covering power distribution, loop testing, control system migration, and cable management.</li> <li>Manage multiple concurrent E&I work fronts, ensuring resource leveling and contractor performance oversight.</li> <li>Ensure engineering and procurement deliverables (SLDs, ILDs, P&IDs, I/O lists, datasheets, cable drums, switchgear, instrument panels) align with construction sequencing and commissioning priorities.</li> <li>Prepare detailed E&I work packages including cable schedules, termination sheets, loop diagrams, installation drawings, and material take-offs.</li> <li>Review and update work package documentation, red-line markups, as-built records, and test documentation.</li> <li>Ensure compliance with IEC/NEC standards, ATEX/IECEx requirements, grounding and bonding standards, and project-specific electrical safety rules.</li> <li>Support commissioning teams in developing energization plans, loop testing protocols, instrument calibration procedures, and control system functional testing.</li> <li>Ensure construction activities integrate seamlessly with commissioning, operations, and other discipline interfaces.</li> <li>Advocate for cold-work strategies such as pre-terminated instrument cables, plug-and-play analyzer shelters, and pre-assembled marshalling cabinets.</li> <li>Align construction execution with project scope, quality, cost, and schedule targets.</li> <li>Ensure engineering and procurement deliverables meet construction and handover requirements.</li> <li>Implement work face planning to ensure crews receive fully validated work packages.</li> <li>Support interfaces with operations, ensuring safe and efficient brownfield and greenfield execution.</li> <li>Ensure final designs incorporate construction risk assessments and economic considerations.</li> </ul> <h4>Education</h4> <p>BSc. in instrumentation, electrical engineering, or a related discipline.</p> <h4>Experience requirements</h4> <ul> <li>Minimum 10+ years experience in oil & gas E&I design, construction, and commissioning.</li> <li>Strong understanding of:</li> <ul> <li>LV/MV electrical distribution</li> <li>Instrumentation installation and calibration</li> <li>Loop testing and commissioning workflows</li> </ul> <li>Proficiency in productivity measurement and resource-based planning (Level 4 scheduling).</li> <li>Proven leadership and supervisory experience in managing E&I construction teams and contractors.</li> <li>Strong organizational skills with the ability to manage multiple work fronts and shifting priorities.</li> <li>High attention to detail with a focus on quality, accuracy, and safe execution.</li> </ul></p><p></p>

<p>Under direct supervision: The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p>

<p><h4>Job description</h4> <p><strong>Function:</strong> Information Management / IT<br> <strong>Role level:</strong> Technical Team Lead<br> <strong>Location:</strong> Majnoon Project – Site Basra<br> <strong>Primary purpose:</strong> Lead systems support, stability, security, upgrades, troubleshooting and documentation<br> <strong>Reporting:</strong> Data Centre Manager</p> <h4>Preface</h4> <p>This job description outlines the purpose, responsibilities, competencies, experience, certifications, technical skills, and language requirements for the System Team Lead role. The role is designed for a technically experienced leader who can guide system administrators and engineers while maintaining reliable, secure, and efficient IT services.</p> <h4>Professional summary</h4> <p>The System Team Lead leads and mentors system administrators and engineers, ensuring that IT systems remain stable, secure, efficient, and aligned with operational requirements. The role oversees system upgrades, troubleshooting, technical support, documentation, and best-practice adoption. It requires strong hands-on technical capability combined with leadership, planning, communication, and stakeholder coordination skills.</p> <h4>Core competencies</h4> <ul> <li>Team leadership, mentoring, coaching, and development of system administrators and engineers.</li> <li>Strong technical problem-solving and ability to manage complex troubleshooting activities.</li> <li>Operational discipline focused on stability, security, availability, and efficiency of IT systems.</li> <li>Ability to plan, coordinate, and oversee system upgrades, patching, and continuous improvement activities.</li> <li>Strong documentation discipline, including procedures, standards, runbooks, and knowledge sharing.</li> <li>Clear communication with technical teams, business users, vendors, and management stakeholders.</li> <li>Ability to prioritize technical work across incidents, maintenance, projects, and operational support.</li> </ul> <h4>Professional experience</h4> <ul> <li>Extensive experience in systems administration, infrastructure support, or IT engineering roles.</li> <li>Experience leading or mentoring system administrators, engineers, or technical support resources.</li> <li>Proven experience supporting enterprise IT systems in operational or project-based environments.</li> <li>Experience overseeing system upgrades, troubleshooting, incident resolution, and root-cause analysis.</li> <li>Experience developing best practices, technical documentation, procedures, and operational standards.</li> <li>Experience working with internal IT teams, vendors, and wider project stakeholders to maintain service continuity.</li> </ul> <h4>Key responsibilities</h4> <ul> <li><strong>Lead and mentor:</strong> Lead, guide, and mentor system administrators and engineers, supporting team capability, work allocation, and technical discipline.</li> <li><strong>Maintain stability:</strong> Ensure IT systems remain stable, secure, efficient, and available to support business and project operations.</li> <li><strong>Oversee upgrades:</strong> Coordinate system upgrades, patching, maintenance activities, and technical changes in line with operational needs.</li> <li><strong>Troubleshoot issues:</strong> Oversee complex troubleshooting, escalation management, root-cause analysis, and incident resolution.</li> <li><strong>Drive best practice:</strong> Develop, maintain, and promote best practices, technical standards, runbooks, and operational documentation.</li> <li><strong>Support governance:</strong> Contribute to IT governance, reporting, risk reduction, service improvement, and stakeholder communication.</li> </ul> <h4>Certifications</h4> <p>Relevant professional certifications are preferred where aligned to the organisation, technology stack, and project requirements. Examples include:</p> <ul> <li>Microsoft, Linux, VMware, Cisco, cloud, cyber security, or infrastructure-related certifications.</li> <li>ITIL Foundation or equivalent service management certification.</li> <li>Security-related certification such as CompTIA Security+, Microsoft Security, or equivalent is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li><strong>Systems administration:</strong> Windows Server, Linux, core infrastructure services, patching, backup, monitoring, and support.</li> <li><strong>Infrastructure operations:</strong> Virtualization, storage, compute, network services, hosting environments, and operational resilience.</li> <li><strong>Security and controls:</strong> Secure configuration, access control, vulnerability remediation, endpoint protection, and compliance support.</li> <li><strong>Troubleshooting:</strong> Incident response, escalation support, root-cause analysis, performance investigation, and service restoration.</li> <li><strong>Upgrades and maintenance:</strong> System upgrades, patch cycles, lifecycle planning, maintenance windows, and technical change coordination.</li> <li><strong>Documentation:</strong> Runbooks, SOPs, standards, technical guides, change records, and knowledge-base material.</li> </ul> <h4>Languages</h4> <p>English language proficiency required for technical documentation, reporting, stakeholder communication, and operational coordination.<br> Arabic language skills are also relevant.</p></p><p></p>

<p><h4>Job description</h4> <p><strong>Function:</strong> Information Management / IT<br> <strong>Role level:</strong> Technical Team Lead<br> <strong>Location:</strong> Majnoon Project – Site Basra<br> <strong>Primary purpose:</strong> Lead systems support, stability, security, upgrades, troubleshooting and documentation<br> <strong>Reporting:</strong> Data Centre Manager</p> <h4>Preface</h4> <p>This job description outlines the purpose, responsibilities, competencies, experience, certifications, technical skills, and language requirements for the System Team Lead role. The role is designed for a technically experienced leader who can guide system administrators and engineers while maintaining reliable, secure, and efficient IT services.</p> <h4>Professional summary</h4> <p>The System Team Lead leads and mentors system administrators and engineers, ensuring that IT systems remain stable, secure, efficient, and aligned with operational requirements. The role oversees system upgrades, troubleshooting, technical support, documentation, and best-practice adoption. It requires strong hands-on technical capability combined with leadership, planning, communication, and stakeholder coordination skills.</p> <h4>Core competencies</h4> <ul> <li>Team leadership, mentoring, coaching, and development of system administrators and engineers.</li> <li>Strong technical problem-solving and ability to manage complex troubleshooting activities.</li> <li>Operational discipline focused on stability, security, availability, and efficiency of IT systems.</li> <li>Ability to plan, coordinate, and oversee system upgrades, patching, and continuous improvement activities.</li> <li>Strong documentation discipline, including procedures, standards, runbooks, and knowledge sharing.</li> <li>Clear communication with technical teams, business users, vendors, and management stakeholders.</li> <li>Ability to prioritize technical work across incidents, maintenance, projects, and operational support.</li> </ul> <h4>Professional experience</h4> <ul> <li>Extensive experience in systems administration, infrastructure support, or IT engineering roles.</li> <li>Experience leading or mentoring system administrators, engineers, or technical support resources.</li> <li>Proven experience supporting enterprise IT systems in operational or project-based environments.</li> <li>Experience overseeing system upgrades, troubleshooting, incident resolution, and root-cause analysis.</li> <li>Experience developing best practices, technical documentation, procedures, and operational standards.</li> <li>Experience working with internal IT teams, vendors, and wider project stakeholders to maintain service continuity.</li> </ul> <h4>Key responsibilities</h4> <ul> <li><strong>Lead and mentor:</strong> Lead, guide, and mentor system administrators and engineers, supporting team capability, work allocation, and technical discipline.</li> <li><strong>Maintain stability:</strong> Ensure IT systems remain stable, secure, efficient, and available to support business and project operations.</li> <li><strong>Oversee upgrades:</strong> Coordinate system upgrades, patching, maintenance activities, and technical changes in line with operational needs.</li> <li><strong>Troubleshoot issues:</strong> Oversee complex troubleshooting, escalation management, root-cause analysis, and incident resolution.</li> <li><strong>Drive best practice:</strong> Develop, maintain, and promote best practices, technical standards, runbooks, and operational documentation.</li> <li><strong>Support governance:</strong> Contribute to IT governance, reporting, risk reduction, service improvement, and stakeholder communication.</li> </ul> <h4>Certifications</h4> <p>Relevant professional certifications are preferred where aligned to the organisation, technology stack, and project requirements. Examples include:</p> <ul> <li>Microsoft, Linux, VMware, Cisco, cloud, cyber security, or infrastructure-related certifications.</li> <li>ITIL Foundation or equivalent service management certification.</li> <li>Security-related certification such as CompTIA Security+, Microsoft Security, or equivalent is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li><strong>Systems administration:</strong> Windows Server, Linux, core infrastructure services, patching, backup, monitoring, and support.</li> <li><strong>Infrastructure operations:</strong> Virtualization, storage, compute, network services, hosting environments, and operational resilience.</li> <li><strong>Security and controls:</strong> Secure configuration, access control, vulnerability remediation, endpoint protection, and compliance support.</li> <li><strong>Troubleshooting:</strong> Incident response, escalation support, root-cause analysis, performance investigation, and service restoration.</li> <li><strong>Upgrades and maintenance:</strong> System upgrades, patch cycles, lifecycle planning, maintenance windows, and technical change coordination.</li> <li><strong>Documentation:</strong> Runbooks, SOPs, standards, technical guides, change records, and knowledge-base material.</li> </ul> <h4>Languages</h4> <p>English language proficiency required for technical documentation, reporting, stakeholder communication, and operational coordination.<br> Arabic language skills are also relevant.</p></p><p></p>