Class C Drivers Jobs

<p><strong>Job Purpose</strong></p> <p>The Senior Team Leader s primary role is that of a TL, in addition to this role the STL will be required to act as the functional link between the ROO APT s and the Operational Management. He will ensure that the communication of operational, administrative and welfare matters is passed upwards and downwards in a timely and professional manner. The STL will further ensure that operations and training minimum standards are maintained and take an active role in administrative oversight of the IN workforce.</p> <p>The STL will take an active role in implementing project SOP s and ensuring the highest possible standards are maintained across the APT s. He will lead by example demonstrating high levels of leadership, command and control, and quality assurance.</p> <p><br></p> <p><strong>Role tasks and responsibilities</strong></p> <ul> <li>Provide daily supervision of APT s</li> <li>Provide management oversight of all APT mission planning</li> <li>Produce and conduct weekly training programs in accordance with project training directives</li> <li>Provide management oversight of APT training and record keeping</li> <li>Conduct Risk Assessments, Route and Venue recce s and provide support to TL s writing reports</li> <li>Ensure APT standards are maintained at the highest possible levels including client etiquette and protocol</li> <li>Mentor and support APT members in all aspects of their roles and responsibilities</li> <li>Actively monitor APT performance identifying and reporting complacency or poor performance to the Operations Manager</li> <li>Report any disciplinary issues to the Operations Manager and assist in investigations where required</li> <li>Promote the importance of equipment care and ensure the implementation of the company EC policy</li> <li>Maintain current and thorough knowledge of the project SOP s</li> <li>Monitor HSE performance across the APT s ensuring safe conduct of duties, reporting all near misses, unsafe acts and incidents to the project HSE representative</li> <li>Ensure management directives are accurately communicated to APT s within their respective groups</li> <li>Act as the first line of management for all issues within their groups engaging higher management where necessary</li> <li>Demonstrate tact, diplomacy and maturity in all aspects of personnel management, maintaining motivation and morale</li> </ul><p><strong>Desired Candidate Profile</strong></p><ul> <li>Minimum 4 years Military experience.</li> <li>Minimum 2 years commercial experience in Iraq working for an MOI registered PSC.</li> <li>Experience working with and managing expatriates and local nationals.</li> <li>SIA License (Frontline Close Protection)</li> <li>Close Protection Qualified (Level 3)</li> <li>FREC/FPOSi/FPOS medical qualification</li> </ul> <p><strong>Preferred</strong></p> <ul> <li>Attendance of an internationally regarded Non-Commissioned Officer course, such as the British Army Platoon Sergeants Battle Course, is desirable.</li> <li>L3 International Award in Delivering Training (AET, CET or equivalent)</li> <li>A minimum of three years of responsible leadership experiences in management or supervisory positions</li> <li>Experience in developing and implementing standard operating procedures and security risk assessments</li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview **This position will be physically located in Balad, Iraq** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the PSM Director and Task Order Manager. Manages the 10 life cycle outcomes of Property Management for the V2X and the program in accordance with FAR Clause 52.245-1, Performance Work Statement, and the Property Management Plan. Manage the company fiduciary accounts with the Theater Property and the Installation Property Book Office ensuring accuracy and compliance of records. Coordinate transfers and support to the customer in accordance with AR735-5 for property and materiel responsibility transfers. Must be able to maintain a professional transparent relationship with auditing agency ensuring timely submissions and responses to all requested actions. Provides guidance on government regulations pertaining to property accountability; develops, recommends and implement property administration policy. Provide training, mentoring, effective and efficient management of all Government Furnished Property, Company Acquired Property for V2X. Coordinate with Property Custodians to ensure and maintain 100% accountability of Government Property in accordance with applicable Government regulations and V2X Property Management Plan. Ensures compliance with prescribed V2X Property Management Plan, Performance Work Statement, and Federal Acquisition Regulations. Provide the government with routine, monthly, special, and annual reports. Maintain an IUID registry for all assets procured or transferred that meets the governments requirements. Ensures all Government Furnished Property and Materials(GFP/GFM) and Contractor Acquired Property and Materials(CAP/CAM) are properly tracked, documented, and identified in V2X Property Book records. Maintain 100% accountability of all company property records through the Maximo Implementation System and must have knowledge of Army Supply System including DLIS Fed log. Provides management direction, training and oversight to include overseeing day to day property control operations; may include but not limited to Custodial record management, CDRL reporting, administrative adjustment reports, cyclic inventory reporting, proper storage of property and materials, sensitive items inventories, receiving, shipping and preparation of all supporting documentation. Routinely visits all work locations to provide assistance, perform assessments, and ensure that the program is being managed properly and effectively in accordance with prescribed directives. Perform duties involving requesting, receiving, issuing, accountability, and preservation of all GFP, GFM, CAP, CFM, and review complete work for accuracy and compliance with established procedures. Provide technical assistance to departments and upper management as needed. Manage and maintain through periodic maintenance, administrative records and submit program status reports IAW established project operating procedures (POP), standard operating procedures (SOP), work instructions (WI) and the contract. Perform duties involving LOSS process through the Property Administrator Reach Back Program, and request for Letter of Technical Direction (LOTD) for gains or losses for assets and materials not procured or disposed of by routine methods. Performs other duties as required. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Manages the 10 life cycle outcomes of Property Management for the V2X, program in accordance with FAR Clause 52.245-1, Performance Work Statement, and the Property Management Plan. + Manage the company fiduciary accounts with the Theater Property and the Installation Property Book Office ensuring accuracy and compliance of records. + Coordinate transfers and support to the customer in accordance with AR 735-5 for property and materiel responsibility transfers. + Must be able to maintain a professional transparent relationship with auditing agency ensuring timely submissions and responses to all requested actions. + Provides guidance on government regulations pertaining to property accountability; develops, recommends and implement property administration policy. + Provide training, mentoring, effective and efficient management of all Government Furnished Property and Company Acquired Property for V2X. Qualifications + Education/Experience Requirements: One year related experience may be substituted for one year of education, if degree is required. + Bachelor’s degree and two years’ experience or High School diploma and eight years’ experience. + A minimum certification of a Certified Property Professional Administrator from the National Property Management Agency or be able to obtain within one year. + A valid driver’s license from home country and base driver’s license, is required. + Experience: Minimum of 6 years specialized experience in property management operations. + Minimum of 5 years supervisory experience in property management operations. + Must be familiar and able to train Property Management operating systems. + Must be familiar with appropriate FAR, DFAR’s, AR’s (Army Regulations) and correct publications concerning 10 Life cycle outcomes. + Skills + Must exhibit strong organization and communication skills. + Must feel comfortable delegating and possess skills to include scheduling workers, keeping track of staffing and keeping their staff motivated. + The most significant experience is education or training from work experience in a related occupation. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. Jobs are sedentary if walking and standing are required only occasionally and all other sedentary criteria are met.. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

The heavy wheel motor vehicle field service representative (FSR) provides on-site technical support and advice to assigned customers.</p> <h4>Principal accountabilities</h4> <p>Typical duties include the following, although specific duties vary by assignment or contract:</p> <ul> <li>Provide technical guidance and advice to the customer.</li> <li>Present a positive image of self and the company’s services.</li> <li>Work effectively with customers from different backgrounds and cultures.</li> <li>Maintain a safe work environment and ensure compliance with safety objectives and policies.</li> <li>Provide inspection support and perform repairs, sustainment maintenance, retrofits, and modifications to multiple platform vehicles.</li> <li>Conduct technical analysis of vehicle implementations, modifications, and enhancements.</li> <li>Troubleshoot technical problems and issues and determine technical solutions.</li> <li>Act as the local on-site representative to the customer’s organization.</li> <li>Document and submit company expense reports and time cards.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Reporting relationships</h4> <p><strong>Title of direct reports:</strong> None<br><strong>Title of supervisor:</strong> Program manager or another supervisor, depending on the assignment.</p> <h4>Knowledge and skills</h4> <ul> <li>Knowledge of database, spreadsheet, presentation, and word processing software.</li> <li>Knowledge of U.S. military vehicle maintenance management publications and guidelines.</li> <li>Ability to interpret and use engineering drawings, schematics, diagrams, and specification sheets.</li> <li>Ability to use power tools, lifting devices, and carrying or support equipment, including the safe use of slings and chains.</li> <li>Familiarity with the use and operation of test, measurement, and diagnostic equipment (TMDE).</li> <li>Ability to function with minimal supervision.</li> <li>Ability to obtain and maintain a U.S. passport.</li> <li>Ability to obtain a secret security clearance.</li> </ul> <h4>Experience and education</h4> <ul> <li>High school diploma or GED required; bachelor’s degree preferred.</li> <li>Class A or B commercial driver’s license (CDL) preferred.</li> <li>Four years of certified vehicle maintenance experience required.</li> <li>ASE-level certification in vehicle and component-level fault diagnostics and maintenance, or military equivalent.</li> <li>Prior instructional experience delivering technical training in fault diagnostics and maintenance or repair.</li> </ul> <h4>Physical requirements and working environment</h4> <ul> <li>Must be willing and able to work in extreme temperatures.</li> <li>Must be able to lift 55 pounds without assistance.</li> <li>Must meet the medical and physical fitness requirements to enter and maintain deployment in accordance with customer requirements.</li> <li>Must be able to live and work in an austere environment, likely in an active combat zone under U.S. government control.</li> </ul> <h4>Travel</h4> <ul> <li>Must be able to travel domestically and internationally.</li> <li>Must be able to relocate to different locations within the area of responsibility (AOR) on short notice to support the assignment.</li> </ul> <h4 class="header-ribbon">About the Company</h4> <p></p><p>Amentum is a premier global technical and engineering services partner supporting critical programs of national significance across defense, security, intelligence, energy, and environment. We draw from a century-old heritage of operational excellence, mission focus, and successful execution underpinned by a strong culture of safety and ethics.</p> <p></p>

<br>Amentum is seeking an Aircraft Mechanic III - Crew Chief to provide aircraft Maintenance Support, Management, and Leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgement in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts both short term and long term. This person shall have working experience all aspects of flightline, phase maintenance, and Aircrew Life Support Systems.<br>Knowledge &amp; Skills<br>• Experience providing OJT to technicians.<br>• Interface with operational customer to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, documents inventory usage, controls workflow.<br>• Work with other A&amp;P Mechanics and technical representatives to trouble shoot, diagnose and solve unusual and complex maintenance problems.<br>• Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneudraulic, fuel, electrical/electronic systems, problems.<br>• Plan and schedule aircraft utilization and maintenance activity and coordinates performance with operational customers.<br>• Assist in maintaining accurate parts inventory.<br>• Supervises aircraft jacking, lifting, and towing operations.<br>• Supervises aircraft and component inspections.<br>• Interprets inspection findings and determines adequacy of corrective actions.<br>• Troubleshoot aircraft structures, systems, components, and related equipment.<br>• Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.<br>• Ability to Inspect and operate powered and nonpowered aerospace ground equipment.<br>• Performs Quality Verification Inspections (QVI) as needed<br>• Perform other qualified duties as assigned<br>Experience &amp; Education<br>• Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).<br>• Minimum of Ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar Fixed-Wing aircraft is required.<br>• Must have Aircraft Maintenance experience.<br>• Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.<br>• Demonstrated leadership ability combined with attention to detail.<br>• Must have knowledge of the scope and limitation of various categories of maintenance and their application.<br>• Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneudraulic; and mechanical principles.<br>• Knowledge of sheet metal, properties of materials, fuels, and oils. Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.<br>• Must have a working knowledge of aircraft safety requirements.<br>• Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.<br>

<p><h4>Aircraft mechanic iii - crew chief opportunity</h4> <p>Amentum is seeking an aircraft mechanic III - crew chief to provide aircraft maintenance support, management, and leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgment in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts – both short term and long term. This person shall have working experience in all aspects of flightline, phase maintenance, and aircrew life support systems.</p> <h4>Knowledge & skills</h4> <ul> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Interface with operational customer to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, document inventory usage, and control workflow.</li> <li>Work with other A&P mechanics and technical representatives to troubleshoot, diagnose, and solve unusual and complex maintenance problems.</li> <li>Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneuhydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Plan and schedule aircraft utilization and maintenance activity and coordinate performance with operational customers.</li> <li>Assist in maintaining accurate parts inventory.</li> <li>Supervise aircraft jacking, lifting, and towing operations.</li> <li>Supervise aircraft and component inspections.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Troubleshoot aircraft structures, systems, components, and related equipment.</li> <li>Review maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Ability to inspect and operate powered and nonpowered aerospace ground equipment.</li> <li>Perform quality verification inspections (QVI) as needed.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Experience & education</h4> <ul> <li>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P).</li> <li>Minimum of ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar fixed-wing aircraft is required.</li> <li>Must have aircraft maintenance experience.</li> <li>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</li> <li>Demonstrated leadership ability combined with attention to detail.</li> <li>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</li> <li>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneuhydraulic; and mechanical principles.</li> <li>Knowledge of sheet metal, properties of materials, fuels, and oils.</li> <li>Ability to read, interpret, and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables, and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must have a working knowledge of aircraft safety requirements.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p><b><span><span><span>T</span></span></span></b><span><span><span>o train and nurture all nursing personnel, guiding staffing procedures, setting objectives and long-term educational goals for the nursing department.</span></span></span></p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><ul> <li><span><span><span><span>Develop, coach, coordinate and evaluate educational programs with full accountability.&nbsp;</span></span></span></span></li> <li><span><span><span><span>Directs and designs curriculums to train and update skills and knowledge of in-service nurses.</span></span></span></span></li> <li><span><span><span><span>Collaborate with clinical nurse manager/clinical coordinator to assess educational needs of staff, plan and provide continuous competency assessment of staff.&nbsp;</span></span></span></span></li> <li><span><span><span><span>Researching and remaining up to date on clinical practices</span></span></span></span></li> <li><span><span><span><span>Educating the technical and patient care staff in using new technology.</span></span></span></span></li> <li><span><span><span><span>Ensures programs developed and implemented promote professional growth and competency of nursing personnel, as well as assist the organization to attain strategic goals. </span></span></span></span></li> <li><span><span><span><span>Provide clinical, educational, and administrative resource to all levels of nursing personnel.&nbsp;</span></span></span></span></li> <li><span><span><span><span>Develop and support preceptors in their roles as appropriate.&nbsp;</span></span></span></span></li> <li><span><span><span><span>Provide mentorship to identified nurses and staff. </span></span></span></span></li> </ul> <br><br><u><b>Job Responsibilities 2</b></u> <br><ul> <li><span><span><span><span>Provide input into the development and implementation of the department’s policies, systems, processes, and procedures, identifying potential areas of improvement, to support an efficient and effective operation.</span></span></span></span></li> <li><span><span><span><span>Contribute to the development and execution of the department’s short to mid-term plans to ensure alignment with the division’s strategic priorities and contribute to the development of annual business plans for the assigned areas of responsibility to support the achievement of financial objectives.</span></span></span></span></li> <li><span><span><span><span>Monitor, control, and report key performance indicators related to the department, to track performance and recommend corrective actions.</span></span></span></span></li> <li><span><span><span><span>Manage the performance management, career progression and activities of direct reports by setting annual objectives, identifying training opportunities, mentoring, coaching, and providing constructive feedback to improve their performance.</span></span></span></span></li> <li><span><span><span><span>Contribute with ideas that support an efficient and effective structure and resource allocation for the department, to ensure smooth workflow of operational processes and optimal utilization of resources.</span></span></span></span></li> </ul> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>• Certification as a registered nurse</p><br> <p>• Ability to assess educational needs and design and develop responsible curricula.</p><br> <p>• Any additional certification in healthcare administration will be considered an advantage.</p><br> <p>• Valid nursing license</p><br> <p>• In-depth knowledge of hospital procedures</p><br> <p>• Outstanding patient management skills</p><br> <p>• Excellent communication and leadership skills</p><br> <p>• Great organizational and time management</p><br> <p>• Problem solver with a positive attitud</p><br> <p>• ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p><span><span><span>Minimum 8 years of experience in Nursing(required)</span></span></span></p><br> <p><span><span><span>3 Years Managerial Experience</span></span></span></p><br> <p><span><span><span>Minimum 2 years in GCC (preferred)</span></span></span></p><br> <br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Build High-Performing Teams<br>Agility<br>Provide Direction<br>Quality Standards and Guidelines L4<br>Licensing and Accreditation L4<br>Needs Assessment and Gap Analysis L4<br>Learning Management L4<br>Evaluation and Assessment L4<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree<br>Master's degree in Nursing or Business Administration<br><br><br><br> </div>

<p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management. Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. (10). Control, minimize and monitor flare losses &amp; waste generation. (11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR's, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p>

<p>Seeking a full-time professional in Iraq, supporting Navigational Aids (NAVAIDS) Maintenance &amp; Repair Support project. This position supports 24/7 aviation operations in a deployed environment and ensures safe, efficient, and compliant airfield operations while supporting mission-critical systems.</p><p>Inspect, maintain, troubleshoot, repair, and replace runway, taxiway, apron, threshold, approach lighting systems, airfield guidance signs, airfield beacons, REILs, and PAPI systems. Perform preventive and corrective maintenance on Airfield Ground Lighting (AGL) systems in accordance with FAA, ICAO, UFC, and contract requirements. Diagnose and repair faults in Constant Current Regulators (CCR), isolation transformers, underground cable circuits, lighting vault equipment, and control systems. Conduct routine airfield inspections to verify operational readiness and compliance of lighting and visual navigation aids. Perform electrical testing, insulation resistance (Megger) testing, continuity testing, and fault isolation using specialized diagnostic equipment. Install, modify, upgrade, and commission airfield lighting systems, LED fixtures, regulators, and associated infrastructure. Maintain maintenance records, inspection logs, work orders, and deficiency reports. Coordinate maintenance activities with Airfield Management, Operations, and other stakeholders. Respond to airfield lighting outages and emergency service calls to restore mission-critical systems. Support airfield inspections, NOTAM actions, and operational readiness activities. Ensure compliance with Lockout/Tagout (LOTO), NFPA 70E, OSHA, and electrical safety requirements.</p><p><strong>Desired Candidate Profile</strong></p><p>Must have computer skills and be able to operate a variety of computer programs. Must be able to speak, read and write English fluently. Must maintain a valid driver's license from their home country with validity for 12 months from on-site employment date. Must maintain a valid passport from their home country with validity for 12 months from on-site employment date. Must satisfy and maintain all medical screening requirements. Ability to perform essential job duties in a deployed environment.</p><p>Minimum 5 years of experience maintaining airfield lighting systems. Technical school, vocational training, military training, or apprenticeship in Electrical Systems, Electronics, or related field preferred. Experience with runway lighting, taxiway lighting, PAPI/VASI systems, REIL systems, airfield beacons, guidance signs, Constant Current Regulators (CCR), and isolation transformers. Demonstrated experience troubleshooting medium- and high-voltage airfield lighting circuits. Ability to read and interpret electrical schematics, wiring diagrams, construction drawings, and technical manuals. Proficiency using multimeters, Megger insulation testers, clamp meters, cable fault locators, and diagnostic equipment. Experience in aviation, airport, military airfield, or deployed environments preferred. Certificate from an accredited training institution certifying electrical, technical, or journeyman-level proficiency training. Certified on the equipment/systems prior to being assigned work and performing maintenance and/or repair on defective equipment/systems. Ability to work rotating shifts, weekends, holidays, and emergency callouts as required. Ability to obtain and maintain authorized access to Iraqi military installations.</p>

<p> <strong>Job Purpose</strong> </p> <p>The Team Leader (TL) has a significant impact on how potential clients assess Control Risks capabilities. The TL is responsible for setting and maintaining the highest standards of team presentation and capability to the client, and will coordinate the direction and management of the team. The TL ensures that the team meets all operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks standard operating procedures (SOPs) and doctrine at all times. The TL assists in mission planning for all tasks as detailed by the Operations Manager. The TL is responsible for the professional delivery of operational briefs to both the team and clients when required. </p> <p> <strong>Roles tasks and responsibilities</strong> </p> <ul> <li>Demonstrates competence in Control Risks SOPs and personal skills</li> <li>Displays client etiquette, discipline and maintain Control Risks low profile approach</li> <li>Remains informed about the threats and key issues in Iraq</li> <li>Conducts vehicle and dismounted contact and immediate action drills</li> <li>Maintains advanced first aid skills</li> <li>Possesses competent navigation skills including map-reading, compass and use of GPS</li> <li>Uses vehicle-mounted and handheld communications systems</li> <li>To be fully conversant and comply with Rules for the Use of Force (RUF)</li> <li>Maintains competence in all required skills through regular formal assessment </li> </ul> <p> <strong>Management responsibilities</strong> </p> <ul> <li>Conducts certifiable instruction in all relevant operational and medical team requirements in accordance with Control Risks training directives</li> </ul> <ul> <li>Ensures the team maintains a professional approach, appropriate client etiquette, discipline and presentation</li> <li>Ensures that the team conducts effective administration, including vehicle maintenance, equipment husbandry/accountability and reports and returns </li> </ul> <p> <strong>Operational responsibilities</strong> </p> <ul> <li>Assists in conducting risk assessments and operational planning</li> <li>Issues orders to team members and brief clients in line with SOPs when required</li> <li>Conducts venue and route recces and produce reports</li> <li>Commands the team and issue direction to clients</li> <li>Provides emergency medical and primary health </li> </ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>Essential</strong> </p> <ul> <li>Completion of Control Risks recruitment and selection process, including a pass on the HECPO course</li> <li>Completion of Close Protection course</li> <li>Familiarity and comfort with Microsoft Office suite of applications</li> <li>Fit and active to work in a hostile environment where there are limited medical facilities</li> <li>A minimum of 5 years of military / police experience </li> <li>A minimum of 2 years of experience working in a PSD capacity in Iraq</li> <li>12 months of commercial APT operational experience in Iraq</li> <li>Available to deploy within 6-8 weeks of hire</li> </ul> <p> <strong>Preferred</strong> </p> <ul> <li>Certified training instructor CTTLS, PTLLS or equivalent BTEC</li> <li>Ex-military JNCO or equivalent</li> <li>Training in leadership skills and performance management</li> <li>Knowledge of and exposure to oil and gas sector</li> </ul> <p> <strong>Qualifications and specialist skills</strong> </p> <ul> <li>If not from a country where English is the official language, the candidate will provide proof (dated within the last 2 years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above</li> <li>Valid SIA Frontline Close Protection Licence</li> <li>Valid certificate for FPOS-I Level 4 and/or FREC Level 3 </li> </ul>

<p><h4>Aircraft mechanic III - crew chief</h4> <p>Amentum is seeking an aircraft mechanic III - crew chief to provide aircraft maintenance support, management, and leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgment in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts – both short term and long term. This person shall have working experience in all aspects of flightline, phase maintenance, and aircrew life support systems.</p> <h4>Knowledge & skills</h4> <ul> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Interface with operational customers to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, document inventory usage, and control workflow.</li> <li>Work with other A&P mechanics and technical representatives to troubleshoot, diagnose, and solve unusual and complex maintenance problems.</li> <li>Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Plan and schedule aircraft utilization and maintenance activity and coordinate performance with operational customers.</li> <li>Assist in maintaining accurate parts inventory.</li> <li>Supervise aircraft jacking, lifting, and towing operations.</li> <li>Supervise aircraft and component inspections.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Troubleshoot aircraft structures, systems, components, and related equipment.</li> <li>Review maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Ability to inspect and operate powered and nonpowered aerospace ground equipment.</li> <li>Perform quality verification inspections (QVI) as needed.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Experience & education</h4> <ul> <li>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P).</li> <li>Minimum of ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar fixed-wing aircraft is required.</li> <li>Must have aircraft maintenance experience.</li> <li>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</li> <li>Demonstrated leadership ability combined with attention to detail.</li> <li>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</li> <li>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneumatic/hydraulic; and mechanical principles.</li> <li>Knowledge of sheet metal, properties of materials, fuels, and oils.</li> <li>Ability to read, interpret, and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables, and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must have a working knowledge of aircraft safety requirements.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> </ul></p><p></p>

<p>In this role, you ll assess, evaluate, manage, and support medication therapies for patients of all ages in outpatient and emergent settings. Your work will span dispensing pharmacy operations, medication guidance for healthcare practitioners, and accountability for prescription and controlled medications. You ll also chair the Pharmacy and Therapeutics Committee, with responsibility for formulary management, and participate in other multidisciplinary committees and administrative projects as assigned.</p><p>Position Title: Pharmacist Assignment Location: Onsite in Balad, Iraq; relocation required. Work Environment: Work is normally performed in a deployed work environment. Coverage: On-call availability required.</p><p>Key Responsibilities</p><ul><li>Establish and operate a dispensing pharmacy, including prescription intake and recording, accurate packaging and dispensing, and complete medication records.</li><li>Collect daily data on prescriptions dispensed and the number of patients receiving prescriptions.</li><li>Counsel patients on proper medication use, possible adverse reactions, and polypharmacy.</li><li>Provide medication education and prescription recommendations to practitioners, advise on potential interactions, and assist nursing staff with medication reconciliation.</li><li>Develop and manage a formulary appropriate to the population and medical services provided.</li><li>Manage non-formulary, controlled, and other critical medications, including resuscitation medications and medications unique to pregnant individuals.</li><li>Oversee medication ordering and inventory to maintain required stock levels within established budgets.</li><li>Manage the cold chain for temperature-controlled pharmaceuticals, including vaccines, and oversee expired medication returns to maximize credit when applicable.</li><li>Maintain accountability and required records for prescription and controlled medications.</li><li>Participate in required monthly controlled-drug inventory counts, audits, reconciliation, and reporting.</li><li>Ensure regulatory compliance throughout medication procurement, storage, distribution, and use.</li><li>Review and update departmental policies, inspect medication stock and use outside the pharmacy, and report noncompliance to the Chief Medical Officer, Health Service Manager, and Chief Pharmacist.</li><li>Monitor pharmacy operations, report adverse drug reactions and medication errors, and implement quality improvements and corrective actions.</li><li>Participate in mass-casualty drills as requested.</li></ul><p>Combine patient counseling with medication safety and formulary management on an international pharmacy assignment in Balad, Iraq. At International SOS Government Medical Services, you'll support healthcare programs that improve patient care and operational readiness across the U.S. and internationally. Founded in 1984, International SOS operates in more than 90 countries, delivering healthcare, medical assistance, emergency response, and workforce support services worldwide.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements Doctor of Pharmacy degree (PharmD), Bachelor of Science in Pharmacy (BS Pharm), or country equivalent. Hold and maintain a current pharmacy license and registration from your country of origin, with education and graduation transcripts. A minimum of three years of experience as a practicing pharmacist , with at least six months of work in the pharmacist career field within the previous 12 months . Fluency in both spoken and written English.</p><p>Assignment and Physical Requirements Obtain medical clearance and maintain current immunizations. Possess a valid passport from your country of record before relocation and maintain a current passport throughout your stay in Balad. Be able to sit and stand for prolonged periods. Work may also require bending, stooping, and lifting up to 15 pounds.</p>

<p>Job Purpose The Team Leader (TL) has a significant impact on how potential clients assess Control Risks capabilities. The TL is responsible for setting and maintaining the highest standards of team presentation and capability to the client, and will coordinate the direction and management of the team. The TL ensures that the team meets all operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks standard operating procedures (SOPs) and doctrine at all times. The TL assists in mission planning for all tasks as detailed by the Operations Manager. The TL is responsible for the professional delivery of operational briefs to both the team and clients when required.</p><p>Role tasks and responsibilities Demonstrates competence in Control Risks SOPs and personal skills Displays client etiquette, discipline and maintain Control Risks low profile approach Remains informed about the threats and key issues in Iraq Conducts vehicle and dismounted contact and immediate action drills Maintains advanced first aid skills Possesses competent navigation skills including map-reading, compass and use of GPS Uses vehicle-mounted and handheld communications systems To be fully conversant and comply with Rules for the Use of Force (RUF) Maintains competence in all required skills through regular formal assessment</p><p>Management responsibilities Conducts certifiable instruction in all relevant operational and medical team requirements in accordance with Control Risks training directives Ensures the team maintains a professional approach, appropriate client etiquette, discipline and presentation Ensures that the team conducts effective administration, including vehicle maintenance, equipment husbandry/accountability and reports and returns</p><p>Operational responsibilities Assists in conducting risk assessments and operational planning Issues orders to team members and brief clients in line with SOPs when required Conducts venue and route recces and produce reports Commands the team and issue direction to clients Provides emergency medical and primary health</p><p><strong>Desired Candidate Profile</strong></p><p>Essential Completion of Control Risks recruitment and selection process, including a pass on the HECPO course (may be gained retrospectively) Completion of Close Protection course Familiarity and comfort with Microsoft Office suite of applications Fit and active to work in a hostile environment where there are limited medical facilities A minimum of 5 years of military / police experience A minimum of 2 years of experience working in a PSD capacity in Iraq 12 months of commercial APT operational experience in Iraq</p><p>Preferred Certified training instructor CTTLS, PTLLS or equivalent BTEC Ex-military JNCO or equivalent Training in leadership skills and performance management Knowledge of and exposure to oil and gas sector</p><p>Qualifications and Specialist Skills If not from a country where English is the official language, the candidate will provide proof (dated within the last 2 years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above Valid SIA Frontline Close Protection Licence Valid certificate for FPOS-I Level 4 and/or FREC Level 3</p>

<p><br></p><p>What You ll Do: Lead and perform maintenance, inspection, troubleshooting, repair, programming, and configuration of VHF, UHF, HF, ground-to-air, and airfield communications systems. Oversee and perform preventive and corrective maintenance on communications equipment in accordance with FAA, ICAO, DoD, OEM, and contract requirements. Diagnose and repair radio transmitters, receivers, antennas, repeaters, base stations, dispatch systems, and associated communications infrastructure. Conduct system testing, performance verification, signal analysis, and fault isolation using specialized electronic test equipment. Support frequency management, spectrum utilization, and communications reliability requirements. Install, modify, upgrade, and commission communications systems and associated hardware. Maintain communications system documentation, maintenance records, inspection reports, and configuration control records. Coordinate and prioritize maintenance activities with Airfield Management, Operations, ATC, and other stakeholders. Provide technical guidance, support, and training to users and junior technicians on communications equipment and systems. Respond to communications outages and emergency service calls to restore mission-critical systems. Ensure compliance with electrical safety, cybersecurity, environmental, and quality control requirements. Support airfield operational readiness inspections and mission support activities.</p><p>Ability to work rotating shifts, weekends, holidays, and emergency call-outs as required.</p><p>Compensation Versar Global Solutions provides the compensation range and general description of other compensation and benefits that the Company in good faith believes it might pay and/or offer for this position based on the successful applicant s education, experience, knowledge, skills, and abilities in addition to internal equity and geographic location. The Company reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant s status protected by local, state, or federal law.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Must be a US Citizen.</p><p>Must have computer skills and be able to operate a variety of computer programs.</p><p>Must be able to speak, read and write English fluently.</p><p>Must maintain a valid driver's license from their home country with validity for 12 months from on-site employment date.</p><p>Must maintain a valid passport from their home country with validity for 12 months from the wheels-up deployment date to the site.</p><p>Ability to perform essential job duties in a deployed environment.</p><p>Associate degree, military technical training, vocational training, or equivalent experience in Electronics, Communications, Telecommunications, or related discipline.</p><p>Minimum 6 years of communications systems maintenance and repair experience.</p><p>Experience with VHF, UHF, HF, land mobile radio (LMR), dispatch, repeater, and aviation communications systems.</p><p>Demonstrated experience troubleshooting electronic communications equipment and associated infrastructure.</p><p>Ability to read and interpret technical manuals, wiring diagrams, schematics, and engineering drawings.</p><p>Experience using multimeters, spectrum analyzers, signal generators, network analyzers, service monitors, and related test equipment.</p><p>Strong troubleshooting, fault isolation, and technical problem-solving skills.</p><p>Experience supporting aviation, military airfield, FAA, ICAO, or DoD operations preferred.</p><p>Technical certification in communications, electronics, radio systems, or related field preferred.</p><p>Certified on the equipment/systems prior to being assigned work and performing maintenance and/or repair on defective equipment/systems.</p>

<p><h4>Aircraft Mechanic III - Crew Chief</h4> <p>Amentum is seeking an aircraft mechanic III - crew chief to provide aircraft maintenance support, management, and leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgment in making decisions by understanding operational requirements, the available resources and options, and analyzing the impacts – both short term and long term. This person shall have working experience in all aspects of flightline, phase maintenance, and aircrew life support systems.</p> <h4>Knowledge & Skills</h4> <ul> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Interface with operational customers to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, document inventory usage, and control workflow.</li> <li>Work with other A&P mechanics and technical representatives to troubleshoot, diagnose, and solve unusual and complex maintenance problems.</li> <li>Ability to apply logic and good judgment, understand technical order diagrams and procedures, and use test equipment for analysis of airframe, engine, flight control, pneumatic/hydraulic, fuel, electrical/electronic systems problems.</li> <li>Plan and schedule aircraft utilization and maintenance activity and coordinate performance with operational customers.</li> <li>Assist in maintaining accurate parts inventory.</li> <li>Supervise aircraft jacking, lifting, and towing operations.</li> <li>Supervise aircraft and component inspections.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Troubleshoot aircraft structures, systems, components, and related equipment.</li> <li>Review maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Ability to inspect and operate powered and nonpowered aerospace ground equipment.</li> <li>Perform quality verification inspections (QVI) as needed.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Experience & Education</h4> <ul> <li>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P).</li> <li>Minimum of ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar fixed-wing aircraft is required.</li> <li>Must have aircraft maintenance and egress experience.</li> <li>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</li> <li>Demonstrated leadership ability combined with attention to detail.</li> <li>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</li> <li>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneumatic/hydraulic; and mechanical principles.</li> <li>Knowledge of sheet metal, properties of materials, fuels, and oils. Ability to read, interpret, and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables, and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must have a working knowledge of aircraft safety requirements.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> </ul></p><p></p>

<p>Job Purpose The Team Leader (TL) has a significant impact on how potential clients assess Control Risks capabilities. The TL is responsible for setting and maintaining the highest standards of team presentation and capability to the client, and will coordinate the direction and management of the team. The TL ensures that the team meets all operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks standard operating procedures (SOPs) and doctrine at all times. The TL assists in mission planning for all tasks as detailed by the Operations Manager. The TL is responsible for the professional delivery of operational briefs to both the team and clients when required. Application closing date: 04 September 2026 Start Date: 15 September 2026</p><p>Role tasks and responsibilities Demonstrates competence in Control Risks SOPs and personal skills. Displays client etiquette, discipline and maintain Control Risks low profile approach. Remains informed about the threats and key issues in Iraq. Conducts vehicle and dismounted contact and immediate action drills. Maintains advanced first aid skills. Possesses competent navigation skills including map-reading, compass and use of GPS. Uses vehicle-mounted and handheld communications systems. To be fully conversant and comply with Rules for the Use of Force (RUF). Maintains competence in all required skills through regular formal assessment.</p><p>Management responsibilities Conducts certifiable instruction in all relevant operational and medical team requirements in accordance with Control Risks training directives. Ensures the team maintains a professional approach, appropriate client etiquette, discipline and presentation. Ensures that the team conducts effective administration, including vehicle maintenance, equipment husbandry/accountability and reports and returns.</p><p>Operational responsibilities Assists in conducting risk assessments and operational planning. Issues orders to team members and brief clients in line with SOPs when required. Conducts venue and route recces and produce reports. Commands the team and issue direction to clients. Provides emergency medical and primary health.</p><p><strong>Desired Candidate Profile</strong></p><p>Essential Completion of Control Risks recruitment and selection process, including a pass on the HECPO course (may be gained retrospectively). Completion of Close Protection course. Familiarity and comfort with Microsoft Office suite of applications. Fit and active to work in a hostile environment where there are limited medical facilities. A minimum of 5 years of military / police experience. A minimum of 2 years of experience working in a PSD capacity in Iraq. 12 months of commercial APT operational experience in Iraq.</p><p>Preferred Certified training instructor CTTLS, PTLLS or equivalent BTEC. Ex-military JNCO or equivalent. Training in leadership skills and performance management. Knowledge of and exposure to oil and gas sector</p><p>Qualifications and Specialist Skills If not from a country where English is the official language, the candidate will provide proof (dated within the last 2 years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above Valid SIA Frontline Close Protection Licence Valid certificate for FPOS-I Level 4 and/or FREC Level 3</p>

<p>The Team Member provides armed protection security for client contracts. They are responsible for maintaining the highest standards and presenting the team and its capabilities to clients. They are compliant with Control Risks standard operating procedures (SOPs) at all times and work with colleagues to deliver the best possible service to the client.</p><p><strong>Tasks and Responsibilities:</strong></p><ul><li>Demonstrates client etiquette, discipline and Control Risks low-profile approach</li><li>Remains informed about the threats and key issues in Iraq</li><li>Conducts vehicle and dismounted contact and immediate action drills</li><li>Possesses competent navigation skills, including map-reading, compass and use of GPS</li><li>Uses vehicle-mounted and handheld communications systems</li><li>Complies with Rules of Engagement and Use of Force</li><li>Maintains competence in all required skills through regular formal assessment</li><li>Conducts effective administration, such as vehicle maintenance, equipment husbandry/accountability and reports and returns</li><li>Assists in conducting risk assessments and operational planning</li><li>Issues orders to team members and briefs clients in line with SOPs when required</li><li>Conducts venue and route recces and produces reports</li><li>Commands the team and issues direction to clients</li></ul><p><br></p><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Essential Minimum of 5 years of military/police experience, with at least 6 months of operation experience</li><li>12 months commercial experience working within a hostile environment (preferably Iraq)</li><li>Attendance on an internationally regarded military Non-Commissioned Officer or similar organisational command and leadership course such as the British Army Section Commanders Battle Course (or higher).</li><li>Fluent English speaker and writer</li><li>Preferred Experience managing operations for oil and gas clients</li><li>Experience managing local guard force</li><li>Experience working for Control Risks in Iraq</li><li>Non-native English speakers from countries where English is not the official language: proof (dated within the last two years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above.</li><li>Valid SIA Frontline Close Protection License or country equivalent</li><li>Valid certificate for FPOS-I Level 4 and/or FREC Level 3 and/or AoFAQ Level 3</li><li>Military records</li><li>Holds a BTEC Level 3 Close Protection Certificate recognised by the Security Industry Authority (SIA) and accredited by Ofqual</li><li>HECPO qualified preferable</li></ul>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <p>Under general supervision:</p> <ul> <li>From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset.</li> <li>Establishes scope of work with site customer and site representative.</li> <li>Checks design documentation for adequacy to specific site conditions and agreed scope of work.</li> <li>Proposes engineering adjustments to site condition as required.</li> <li>Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion.</li> <li>Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice.</li> <li>Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter.</li> <li>Prepares periodic reports for upper management.</li> </ul> <p> </p> <p> <strong>Additional Role Responsibilities:</strong> </p> <p>(1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; <br>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; <br>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; <br>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; <br>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team; <br>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; <br>(7). Monitor and operate the SAP/CMMS system. <br>(8). Contribute and participate in successful completion of plant improvements; <br>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. <br>(10). Control, minimize and monitor flare losses &amp; waste generation. <br>(11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. <br>(12). Identify team and individuals limitations and develop contingency plans to address any short fall. </p><p><strong>Desired Candidate Profile</strong></p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields.</p> <p> </p> <p> <strong>Preferred Experience:</strong> <br> Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. <br> Recognized International Qualifications (NVQ, C&amp;G, OPITO etc)<br> Valid Emergency Response competence<br> CMMS/SAP Experience <br> Coaching &amp; Development Experience (Competence Assessors preferred) <br> Commissioning experience<br> Experience from similar challenging environments. (Wells experience a must for production operations personnel)<br> Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.)<br> Internationally recognized driving license<br> Good English skills, Arabic speaking advantageous<br> ISSOW/PTW experience <br> </p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <p>Under general supervision:</p> <ul> <li>From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset.</li> <li>Establishes scope of work with site customer and site representative.</li> <li>Checks design documentation for adequacy to specific site conditions and agreed scope of work.</li> <li>Proposes engineering adjustments to site condition as required.</li> <li>Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion.</li> <li>Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice.</li> <li>Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter.</li> <li>Prepares periodic reports for upper management.</li> </ul> <p> </p> <p> <strong>Additional Role Responsibilities:</strong> </p> <p>(1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; <br>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; <br>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; <br>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; <br>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team; <br>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; <br>(7). Monitor and operate the SAP/CMMS system. <br>(8). Contribute and participate in successful completion of plant improvements; <br>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. <br>(10). Control, minimize and monitor flare losses &amp; waste generation. <br>(11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. <br>(12). Identify team and individuals limitations and develop contingency plans to address any short fall. </p> <p> </p> <p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields.</p> <p> </p> <p> <strong>Preferred Experience:</strong> <br> Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. <br> Recognized International Qualifications (NVQ, C&amp;G, OPITO etc)<br> Valid Emergency Response competence<br> CMMS/SAP Experience <br> Coaching &amp; Development Experience (Competence Assessors preferred) <br> Commissioning experience<br> Experience from similar challenging environments. (Wells experience a must for production operations personnel)<br> Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.)<br> Internationally recognized driving license<br> Good English skills, Arabic speaking advantageous<br> ISSOW/PTW experience <br> </p>

<h3>Job Duties</h3>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management. Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Manager in case of emergency. (10). Control, minimize and monitor flare losses &amp; waste generation. (11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall. <p>Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience. Apply Now</p><p><strong>Desired Candidate Profile</strong></p><h3>Qualifications</h3>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR's, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience

<p>The Avionics Technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical / avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical / avionics discrepancies.</p> <div> <div> <div> <div> <div> <div> <div> <div> <div> <p> </p> <p> <b>Essential Responsibilities:</b> </p> <ul> <li> <p>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems</p> </li> <li> <p>Possess a high degree of expertise of aircraft electrical/avionics systems</p> </li> <li> <p>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications</p> </li> <li> <p>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical / avionics systems.</p> </li> <li> <p>Utilize test equipment to include but not limited to digital volt / amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics / electrical systems.</p> </li> <li> <p>Order parts and materials.</p> </li> <li> <p>Obtain and maintain qualification as a Plane Captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2. </p> </li> <li> <p>Operate ground support equipment.</p> </li> <li> <p>Identify and treat avionics/ electrical corrosion.</p> </li> <li> <p>Perform aircraft jacking and hoisting as required.</p> </li> <li> <p>Perform certification and re-certification of altimeter systems.</p> </li> <li> <p>Perform calibration of directional guidance systems.</p> </li> <li> <p>Required to perform collateral duty inspections.</p> </li> <li> <p>Must obtain and keep current turn qualification.</p> </li> <li> <p>Maintain cleanliness of the work center.</p> </li> <li> <p>Comply with Foreign Object Damage (FOD), Egress Familiarization, and Hazardous Waste and Tool Control programs.</p> </li> <li> <p>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</p> </li> <li> <p>Assist as directed to ensure safety, security and preservation of government / company owned equipment.</p> </li> <li> <p>Present a courteous and professional demeanor when dealing with customers.</p> </li> <li> <p>Furnish and maintain own hand tools.</p> </li> <li> <p>Operate portable firefighting equipment.</p> </li> <li> <p>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</p> </li> <li> <p>Perform all other position related duties as assigned or requested.</p> </li> </ul> <p> </p> <p> <b>Minimum Qualifications:</b> </p> <ul> <li> <p>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and / or experience working with similar avionics systems and components is required.</p> </li> <li> <p>Graduation from high school or GED required.</p> </li> <li> <p>Must be able to meet any Government / Company licensing / qualification requirements for the position.</p> </li> <li> <p>Must have an FAA Airframe and Powerplant (A&amp;P) License.</p> </li> <li> <p>Must have three (3) years experience in T6 aircraft electrical / avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/ or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirement.</p> </li> <li> <p>Demonstrate a basic knowledge of aircraft systems and nomenclature. </p> </li> <li> <p>Possess working knowledge and skill in the use of basic tools and test equipment.</p> </li> <li> <p>Must be familiar with the operational capabilities and limitations of electrical / avionics systems.</p> </li> <li> <p>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</p> </li> <li> <p>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</p> </li> <li> <p>Must obtain and keep current turn qualification.</p> </li> </ul> </div></div></div></div></div></div></div></div></div>