Strategic Planning Manager Jobs - Basra Iraq

<p><span style="font-size: 14px;"><b>Main responsibilities:</b></span></p> <ul> <li>Support the development and implementation of the Lifting Management System, ensuring compliance with applicable regulations, Company standards and lifting requirements.</li> <li>Provide technical advice and guidance on lifting operations, including deviations and non-compliances.</li> <li>Support lift planning, categorisation and risk assessments, working closely with Lifting and HSE teams.</li> <li>Assess lifting requirements, including load weight, centre of gravity, lifting points and suitable cranes and lifting equipment.</li> <li>Identify lifting hazards and associated risks and promote safe working practices.</li> <li>Support the inspection and assessment of lifting equipment, including structural integrity and discard criteria.</li> <li>Monitor lifting operations and recommend improvements to procedures, working practices and safety performance.</li> <li>Support training and competence development for lifting personnel in line with internationally recognised standards.</li> <li>Ensure accurate records of lifting equipment certification, condition and performance.</li> <li>Promote best practice and continuous improvement, sharing technical knowledge across relevant teams.</li> <li>Ensure compliance with Company HSE policies, procedures and standards.</li> </ul> <h4><b><br></b></h4><h4><b>Skills and experience required:</b></h4> <ul> <li>Minimum 5 years' experience in oil and gas projects.</li> <li>Relevant qualification in Civil, Structural or Mechanical Engineering, or a related discipline.</li> <li>Certification from an internationally recognised lifting and rigging association.</li> <li>Strong knowledge of lifting regulations and international standards, including LOLER, BS 7121, ASME B30, API 8C and ISO 9927.</li> <li>Fluency in English; additional languages are an advantage.</li> <li>Strong knowledge of lifting and hoisting operations, risk management and HSEQ requirements.</li> <li>Experience in contractor monitoring, audits and vendor qualification.</li> <li>Strong planning, organisational and attention-to-detail skills.</li> <li>Good communication, interpersonal and teamwork skills.</li> <li>Self-motivated, with the ability to manage priorities and meet deadlines.</li> </ul> <p><br></p><p><strong>Desired Candidate Profile</strong></p><ul> <li><br></li></ul>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <p>The Geophysics Advisor provides expert geophysical interpretation, seismic reservoir characterization, and subsurface imaging support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract.</p> <p>Under broad direction from the Subsurface Technical Manager:</p> <ul> <li>Develop and apply advanced development geophysical techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li> <li>Responsible for integrating seismic, geological, and engineering data to enhance reservoir understanding, support field development planning, and reduce subsurface uncertainty.</li> <li>The Geophysical Advisor will lead seismic interpretation (faults, horizons, stratigraphic features), and attribute analysis to define structural and stratigraphic frameworks</li> <li>Conduct seismic inversion, AVO, and attribute studies to improve reservoir property prediction and fluid delineation. Support time-to-depth conversion, velocity modeling, and depth imaging workflows.</li> <li>Support prospect evaluation and field development work by providing validation of preexisting interpretations as well as creating new interpretations</li> <li>Additionally, provide geophysical input to field development plans, well placement, and drilling programs.</li> <li>Solid grounding in geophysics and working knowledge of development geology, static modeling, geologic operations, logging, directional drilling, petrophysics, reservoir simulation and drilling &amp; completions.</li> <li>Understands the fundamentals of subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li> <li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders .</li> <li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li> <li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li> <li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li> </ul> <p> <strong>Qualifications</strong> </p> <ul> <li>Requires an undergraduate degree in Geophysics and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development/technical geophysics, static modeling, operations geology, field development planning etc.</li> <li>Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator.</li> <li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li> </ul> <p> </p> <p>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Geophysics Advisor, Geophysics Advisor, Sr, and Technical Manager</p> <p><br></p><p><strong>Desired Candidate Profile</strong></p><ul> <li>Requires an undergraduate degree in Geophysics and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development/technical geophysics, static modeling, operations geology, field development planning etc.</li> <li>Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator.</li> <li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li> </ul>

<p>The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p>Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p><p>(2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description</h4> <p>The telecom construction supervisor is responsible for day-to-day supervision of telecommunications construction activities across greenfield and brownfield areas within the Majnoon Oil Field. The role ensures safe execution, technical compliance, and adherence to project specifications, supporting the delivery of telecom systems in line with cost, schedule, and quality expectations. The supervisor works closely with engineering, HSE, construction, and C&P teams to maintain progress and resolve operational issues.</p> <h4>Accountabilities / expectations</h4> <ul> <li>Ensure compliance with KBR and project HSE standards across all telecom construction activities.</li> <li>Enforce safe work practices including confined space entry, lifting operations, electrical safety, and cable installation.</li> <li>Conduct regular inspections, toolbox talks, and participate in risk mitigation planning.</li> </ul> <h4>Telecommunications construction supervision</h4> <p>Supervise installation, configuration, testing, and preservation of telecom systems including:</p> <ul> <li>Fiber optic networks</li> <li>Structured cabling</li> <li>Radio systems</li> <li>PAGA</li> <li>CCTV</li> <li>Access control systems (ACS)</li> <li>PIDs</li> <li>Voice, data, and video networks</li> </ul> <ul> <li>Review vendor test results for fiber optic and network performance and report deviations.</li> <li>Monitor contractor performance to ensure adherence to project specifications and quality requirements.</li> <li>Support implementation of construction strategies for both greenfield and brownfield scopes.</li> </ul> <h4>Coordination & execution</h4> <ul> <li>Work with the discipline lead to maintain alignment on scope, quality, cost, and schedule.</li> <li>Ensure engineering and C&P deliverables support construction sequencing and handover milestones.</li> <li>Participate in constructability reviews to identify risks and improve productivity.</li> <li>Coordinate integration of telecom infrastructure into the broader construction plan with minimal disruption.</li> <li>Maintain accurate progress reporting and ensure documentation is complete and up to date.</li> </ul> <h4>Technical support & issue resolution</h4> <ul> <li>Identify technical issues and coordinate with engineering and contractors to resolve them promptly.</li> <li>Ensure telecom installations comply with international standards and project-specific requirements.</li> <li>Supervise multiple telecom work fronts to maintain schedule and quality performance.</li> </ul> <h4>Team supervision & communication</h4> <ul> <li>Supervise telecom technicians and contractor teams, providing clear daily instructions and expectations.</li> <li>Offer technical guidance and monitor workmanship to ensure compliance with standards.</li> <li>Communicate effectively with stakeholders, including non-technical personnel, to ensure clarity of interfaces and requirements.</li> </ul> <h4>Performance & delivery</h4> <ul> <li>Ensure telecom construction activities are executed safely, on schedule, and within defined quality parameters.</li> <li>Maintain compliance with project specifications, standards, and HSE requirements.</li> <li>Support productivity improvements and resource-based planning (Level 4 Scheduling).</li> <li>Maintain strong coordination between contractors, engineering teams, and client representatives.</li> <li>Support seamless integration of telecom systems into operational infrastructure.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree in telecommunications, electrical engineering, or related discipline.</p> <h4>Experience</h4> <ul> <li>8+ years of experience in oil & gas telecommunications systems.</li> <li>Strong background in fiber optics, structured cabling, radio communication, CCTV, SCADA, and PAGA systems.</li> <li>Experience in remote and challenging environments, including brownfield and greenfield projects.</li> <li>Knowledge of international telecom standards and oil & gas HSE regulations.</li> </ul> <h4>Skills</h4> <ul> <li>Strong supervisory and team coordination capability.</li> <li>Experience in productivity measurement and resource-based planning.</li> <li>Excellent communication and interface management skills.</li> <li>Ability to supervise multiple work fronts simultaneously.</li> </ul></p><p></p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <p> <strong>Position Summary</strong> <strong> </strong> </p> <p>The Geology Advisor provides expert geological interpretation, reservoir characterization, and development planning support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract. </p> <p> <strong>Job Duties</strong> </p> <p>Under broad direction from the Subsurface Technical Manager:</p> <ul> <li>Develop and apply advanced development geology techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li> <li>Accountable for ensuring robust geological understanding of the asset, integrating static and dynamic data to guide reservoir management, field development, and production optimization.</li> <li>The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.)</li> <li>Role includes data analysis, reservoir characterization and mapping, determination of reservoir rock and fluid properties, static uncertainty/risk management analysis, deterministic/probabilistic in-place hydrocarbon volumetric calculations, static modeling, reserves estimation, and other work related to reservoir understanding / development.</li> <li>Lead the interpretation of geological, geophysical, petrophysical, and drilling data to develop robust static reservoir models. Integrating well log, core, seismic, and production data to define reservoir architecture, facies distribution, and structural framework.</li> <li>Solid grounding in development geology and working knowledge of geologic operations, logging, directional drilling, petrophysics, geophysics, rock and core sampling and analysis, reservoir simulation and drilling &amp; completions.</li> <li>Understands the fundamentals of petroleum engineering, subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li> <li>Collaborate with production and operations teams to identify and implement production enhancement opportunities. Additionally, translates technical insights into actionable operational and development plans.</li> <li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders</li> <li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li> <li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li> <li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li> </ul> <p> <strong>Qualifications</strong> </p> <ul> <li>Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc.</li> <li>Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator.</li> <li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li> </ul> <p> </p> <p>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Geology Advisor, Geology Advisor, Sr, and Technical Manager. </p> <p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc.</li><li>Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator.</li><li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li></ul>

<p><br></p> <p> <br>At <strong>Eni</strong>, we are looking for a <strong>Junior Compliance Analyst</strong> to join <strong>Eni Iraq B.V.</strong> in <strong>Basra</strong>. You will be responsible for supporting the Governance &amp; Compliance Manager with Internal Control over Financial Reporting (ICFR) requirements, including the Sarbanes-Oxley Act (SOX), FRA and ELC/PLC, as well as maintaining Eni Iraq s Regulatory System in line with HQ requirements.</p> <p> <strong>Main responsibilities:</strong> </p> <ul> <li>Support the Governance &amp; Compliance Manager in a timely and proactive manner.</li> <li>Assess and monitor Eni Iraq s Internal Control over Financial Reporting (ICFR/SOX) system, including complete, accurate and timely record-keeping.</li> <li>Support the reporting of outcomes from ICFR monitoring activities, including CELC/ERICE.</li> <li>Support the Governance &amp; Compliance Manager during internal and external ICFR/SOX audits.</li> <li>Support self-assessments and monitor related action plans.</li> <li>Support the implementation and updating of Eni Iraq s Finance &amp; Control Regulatory System, including the adoption of MSGs, procedures, OPIs and best practices.</li> <li>Track and monitor the timely implementation of action plans.</li> <li>Support the Governance &amp; Compliance Manager with internal assessments, audits and projects, as required.</li> </ul> <p> <strong>Skills and experience required:</strong> </p> <ul> <li>Bachelor s degree in Accounting, Business Administration or a related discipline.</li> <li>Relevant experience within a Big Four firm, international company or similar role.</li> <li>Master s degree, ACCA, CPA or equivalent is preferred.</li> <li>Fluency in English and Arabic; Italian is an advantage.</li> <li>Strong analytical, communication and interpersonal skills.</li> <li>Good planning, organisational and problem-solving skills.</li> <li>Results-oriented, risk-aware and detail-focused.</li> <li>Ability to meet deadlines and work with minimal supervision.</li> <li>Good Microsoft Office skills.</li> <li>High level of integrity, responsibility and reliability.</li> </ul> <p><br></p><p><strong>Desired Candidate Profile</strong></p><p> <strong>Skills and experience required:</strong> </p> <ul> <li>Bachelor s degree in Accounting, Business Administration or a related discipline.</li> <li>Relevant experience within a Big Four firm, international company or similar role.</li> <li>Master s degree, ACCA, CPA or equivalent is preferred.</li> <li>Fluency in English and Arabic; Italian is an advantage.</li> <li>Strong analytical, communication and interpersonal skills.</li> <li>Good planning, organisational and problem-solving skills.</li> <li>Results-oriented, risk-aware and detail-focused.</li> <li>Ability to meet deadlines and work with minimal supervision.</li> <li>Good Microsoft Office skills.</li> <li>High level of integrity, responsibility and reliability.</li> </ul>

<p><h4>Planning and risk assessment</h4> <p>Conduct a detailed discussion with the performing authority (PA) during the work planning stage to ensure all hazards are identified. Verify that an appropriately detailed risk assessment is completed to reduce risks to an acceptable level (ALARP). Ensure the quality of the CoW documentation by checking that the content is accurate and supplementary certificates are approved and attached.</p> <h4>Worksite visits and monitoring</h4> <p>Visit the worksite with the PA to prepare the hazard identification and risk assessment (HITRA), ensuring the PA understands the location, equipment, activities, hazards, and related controls. Attend the worksite on the initial issue of the permit, participate in toolbox talks, and authorize the work to start. Perform regular monitoring checks during each shift, particularly within the first hour of the permit's issuance.</p> <h4>Energy isolation and safety controls</h4> <p>Approve the design of energy isolation and oversee the implementation of energy isolation measures prior to the issuance of work permits. Confirm that energy isolation is in place before task initiation and demonstrate the isolation to the PA. Confirm positive isolation for hot work and confined space entry tasks. Liaise with the station SAEP to ensure that all work with electrical content is reviewed, and all associated electrical certificates and risk assessments are in place. Authorise sanction to test on agreed isolations and points. Maintain the station isolation register, monitoring work scopes and removing isolation when required or transferring to LTI.</p> <h4>Permit closure and worksite safety</h4> <p>Close permits by signing to confirm that work is completed, ensuring that the worksite is left safe, clean, and tidy. Ensure that energy isolation is removed after work completion and the cancellation of the permit.</p> <h4>Shift handover</h4> <p>Conduct a thorough handover regarding ongoing tasks during shift changes with the oncoming AA, ensuring continuity and safety.</p> <h4>SIMOPS coordination</h4> <p>Ensure that work can proceed safely with no significant impact from or to SIMOPS.</p> <h4>Daily meetings and continuous improvement</h4> <p>Attend daily permit/SIMOPS meetings to provide detailed work scopes to support the site manager (SM). Capture any lessons learned from the CoW process within WorkSafe and conduct self-verification audits.</p></p><p></p>

<p><h4>Planning and risk assessment</h4> <p>Conduct a detailed discussion with the Performing Authority (PA) during the work planning stage to ensure all hazards are identified. Verify that an appropriately detailed risk assessment is completed to reduce risks to an acceptable level (ALARP). Ensure the quality of the CoW documentation by checking that the content is accurate and supplementary certificates are approved and attached.</p> <h4>Worksite visits and monitoring</h4> <p>Visit the worksite with the PA to prepare the Hazard Identification and Risk Assessment (HITRA), ensuring the PA understands the location, equipment, activities, hazards, and related controls. Attend the worksite on the initial issue of the permit, participate in toolbox talks, and authorize the work to start. Perform regular monitoring checks during each shift, particularly within the first hour of the permit's issuance.</p> <h4>Energy isolation and safety controls</h4> <p>Approve the design of energy isolation and oversee the implementation of energy isolation measures prior to the issuance of work permits. Confirm that energy isolation is in place before task initiation and demonstrate the isolation to the PA. Confirm positive isolation for Hot Work and Confined Space Entry tasks. Liaise with the station SAEP to ensure that all work with electrical content is reviewed, and all associated electrical certificates and risk assessments are in place. Authorises sanction to test on agreed isolations and points. Maintains station isolation register, monitoring work scopes and removing isolation when required or transferring to LTI.</p> <h4>Permit closure and worksite safety</h4> <p>Close permits by signing to confirm that work is completed, ensuring that the worksite is left safe, clean, and tidy. Ensure that energy isolation is removed after work completion and the cancellation of the permit.</p> <h4>Shift handover</h4> <p>Conduct a thorough handover regarding ongoing tasks during shift changes with the oncoming AA, ensuring continuity and safety.</p> <h4>SIMOPS coordination</h4> <p>Ensure that work can proceed safely with no significant impact from or to SIMOPS.</p> <h4>Daily meetings and continuous improvement</h4> <p>Attend daily permit/SIMOPS meetings to provide detailed work scopes to support the Site Manager (SM). Capture any lessons learned from the CoW process within WorkSafe and conduct self-verification audits.</p></p><p></p>

<p>Under direct supervision: The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p>

<p><h4>Role purpose</h4> <p>The Wells AAD is a mobile Control of Work focal point for workover rigs and well services activities. The role focuses on forward planning and work readiness, connecting Wells schedules with station permit and isolation preparation to reduce avoidable non productive time while ensuring compliant execution and responsive support for emergent work.</p> <h4>Scope and authority</h4> <p>This is a roving Wells-facing role, not a routine degassing-station operations position. The Wells AAD coordinates with station teams but does not replace the Site Controller, station Area Authority or Isolating Authority, or independently authorise station isolations. Formal AA or permit decision rights apply only where the individual has been specifically appointed and authorised under ROO CoW requirements.</p> <h4>Lookahead, planning and readiness</h4> <ul> <li>Engage routinely with Workover and Well Services Superintendents, Coordinators and planning personnel to review upcoming jobs, rig movements and rolling lookahead schedules.</li> <li>Identify upcoming Control of Work requirements early, including permits, HITRAs, isolation plans, certificates, SIMOPS interfaces, site access and prerequisite approvals.</li> <li>Coordinate with relevant stations, Site Controllers, Area Authorities and isolation teams to confirm that permit and isolation preparations are progressing in advance of workover rig or well services arrival.</li> <li>Maintain a visible readiness / action tracker for upcoming work; follow up gaps, escalate blockers promptly and flag likely NPT exposure before mobilisation.</li> <li>Support rapid reprioritisation for production-critical and emergent well services jobs without bypassing risk assessment, permit or isolation requirements.</li> </ul> <h4>Mobile field execution and worksite verification</h4> <ul> <li>Travel between workover rig and well services locations as operational priorities require, including well services activities, to provide on-the-ground CoW support.</li> <li>Before work starts, verify that the planned scope matches the permit and HITRA; review changes in location, equipment, hazards or simultaneous activities with the relevant authorities.</li> <li>Coordinate on location with the Workover Supervisor / WSL or Well Services Supervisor, Performing Authority and station team to resolve CoW questions and readiness issues.</li> <li>Approving the HITRAs and drafting isolations and field application of the associated ICCs as required for upcoming well activities.</li> <li>Participate in worksite visits, pre-job discussions, toolbox talks and field verification; intervene and escalate if conditions or work scope exceed the approved controls.</li> <li>Help secure timely permit amendments, revalidation or additional isolations where scope or conditions change, using the proper authorisation route.</li> </ul> <h4>Coaching, assurance and improvement</h4> <ul> <li>Coach Wells and station personnel on clear work scopes, fit-for-purpose HITRAs, permit quality, isolation interfaces and SIMOPS during well interventions.</li> <li>Check WorkSafe permit status and supporting documentation, challenge incomplete submissions and support responsible personnel to correct them.</li> <li>Record root causes and trends in permit/isolation delays, share lessons with Wells and CoW leadership and propose practical improvements to the lookahead and readiness process.</li> <li>Support agreed competency verification, field audits and CoW assurance activities, including checks that completed work is closed and handed back through the accountable authority.</li> </ul> <h4>Key working interfaces</h4> <ul> <li>Workover and Well Services Superintendents and Coordinators: lookahead, priorities, mobilisation sequencing and emergent jobs.</li> <li>Workover Supervisor / WSL and Well Services Supervisor: work scope, location readiness, toolbox talks and changed conditions during execution.</li> <li>Site Controller, station AA, Operations Advisor, Isolating Authority and relevant electrical authority: permit preparation, isolation readiness and operational interfaces.</li> <li>Performing Authorities and contractors: permit/HITRA quality, pre-job verification and compliance.</li> <li>CoW Team Leader and Specialist: obstacles, NPT trends, assurance findings and continuous improvement.</li> </ul> <h4>Experience, qualifications and skills</h4> <ul> <li>At least five years of relevant hydrocarbon operations and/or Control of Work experience, with practical knowledge of PTW, HITRA, energy isolation and SIMOPS.</li> <li>Working knowledge of well intervention, workover and well services activities, particularly slickline, e-line and rig mobilisation interfaces, is strongly preferred.</li> <li>Previous experience as an Area Authority, Site Controller or CoW practitioner/coach is desirable; demonstrated ability to operate within defined delegated authority.</li> <li>Strong communication, coordination, coaching and influencing skills, with the confidence to challenge unsafe or inadequately prepared work.</li> <li>Ability to work independently, prioritise competing demands and use WorkSafe and associated digital systems effectively.</li> <li>Relevant HSE/technical qualification or equivalent applicable experience; Arabic and English communication skills appropriate for the position.</li> </ul> <h4>Performance measures</h4> <ul> <li>Percentage of planned Wells activities confirmed permit/isolation-ready before planned mobilisation.</li> <li>Permit- and isolation-related NPT trends for workover and well services activities.</li> <li>Timely closure/escalation of readiness actions and responsiveness to emergent work.</li> <li>Quality of worksite scope verification, coaching, documented learning and CoW compliance.</li> </ul> <h4>Systems and standards</h4> <p>Competent use of WorkSafe and relevant ROO CoW procedures, including HITRA, permit-to-work, energy isolation and SIMOPS requirements. Use Maximo, ShareCat, SharePoint, GIS and drawing mark-up tools where needed for the assigned work.</p></p><p></p>

<ul> <li>A Planning / Schedule Engineer is responsible for developing, monitoring, updating, and controlling project schedules to ensure that projects are completed within the approved timeline and budget. The engineer coordinates with different departments, monitors project progress, identifies delays, and prepares regular progress reports.</li> </ul><h4>Knowledge And Qualification</h4><ul> <li>DIPLOMA/DEGREE.</li> <li>English communication skills.</li> </ul><h4>Responsibilities</h4><ul> <li>Develop detailed project schedules using Primavera P6 or MS Project.</li> <li>Prepare project baseline schedules and work breakdown structures (WBS).</li> <li>Monitor daily, weekly, and monthly project progress.</li> <li>Track project activities against planned schedules.</li> <li>Identify delays, critical activities, and potential project risks.</li> <li>Prepare progress reports, S-curves, and manpower histograms.</li> </ul><p><strong>Desired Candidate Profile</strong></p><ul> <li>DIPLOMA/DEGREE.</li> <li>English communication skills.</li> </ul>

<p>1. Marketing Manager <br> Minimum 5 years of relevant marketing experience, preferably in retail, luxury brands, cosmetics, or FMCG. <br> Experience in developing marketing strategies, managing budgets, and leading campaigns. <br> Background in brand management, market research, and marketing performance analysis. <br> Ability to lead teams and coordinate marketing activities across multiple brands. <br> <br>2. Digital Marketer <br> Minimum 3 years of experience in digital marketing and social media management. <br> Hands-on experience with Meta Ads, Instagram, TikTok, and Google Ads. <br> Strong skills in content planning, campaign management, and digital analytics. <br> Ability to grow online audiences, increase engagement, and generate leads.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements for Both Positions: <br> Iraqi or Lebanese nationals. <br> Strong communication and creative thinking skills. <br> Experience in retail, cosmetics, perfumes, luxury brands, or FMCG is an advantage. <br> Currently based in Iraq or willing to relocate.</p>

<p> <strong>Job Purpose</strong> </p> <p>The Team Leader (TL) has a significant impact on how potential clients assess Control Risks capabilities. The TL is responsible for setting and maintaining the highest standards of team presentation and capability to the client, and will coordinate the direction and management of the team. The TL ensures that the team meets all operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks standard operating procedures (SOPs) and doctrine at all times. The TL assists in mission planning for all tasks as detailed by the Operations Manager. The TL is responsible for the professional delivery of operational briefs to both the team and clients when required. </p> <p> <strong>Roles tasks and responsibilities</strong> </p> <ul> <li>Demonstrates competence in Control Risks SOPs and personal skills</li> <li>Displays client etiquette, discipline and maintain Control Risks low profile approach</li> <li>Remains informed about the threats and key issues in Iraq</li> <li>Conducts vehicle and dismounted contact and immediate action drills</li> <li>Maintains advanced first aid skills</li> <li>Possesses competent navigation skills including map-reading, compass and use of GPS</li> <li>Uses vehicle-mounted and handheld communications systems</li> <li>To be fully conversant and comply with Rules for the Use of Force (RUF)</li> <li>Maintains competence in all required skills through regular formal assessment </li> </ul> <p> <strong>Management responsibilities</strong> </p> <ul> <li>Conducts certifiable instruction in all relevant operational and medical team requirements in accordance with Control Risks training directives</li> </ul> <ul> <li>Ensures the team maintains a professional approach, appropriate client etiquette, discipline and presentation</li> <li>Ensures that the team conducts effective administration, including vehicle maintenance, equipment husbandry/accountability and reports and returns </li> </ul> <p> <strong>Operational responsibilities</strong> </p> <ul> <li>Assists in conducting risk assessments and operational planning</li> <li>Issues orders to team members and brief clients in line with SOPs when required</li> <li>Conducts venue and route recces and produce reports</li> <li>Commands the team and issue direction to clients</li> <li>Provides emergency medical and primary health </li> </ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>Essential</strong> </p> <ul> <li>Completion of Control Risks recruitment and selection process, including a pass on the HECPO course</li> <li>Completion of Close Protection course</li> <li>Familiarity and comfort with Microsoft Office suite of applications</li> <li>Fit and active to work in a hostile environment where there are limited medical facilities</li> <li>A minimum of 5 years of military / police experience </li> <li>A minimum of 2 years of experience working in a PSD capacity in Iraq</li> <li>12 months of commercial APT operational experience in Iraq</li> <li>Available to deploy within 6-8 weeks of hire</li> </ul> <p> <strong>Preferred</strong> </p> <ul> <li>Certified training instructor CTTLS, PTLLS or equivalent BTEC</li> <li>Ex-military JNCO or equivalent</li> <li>Training in leadership skills and performance management</li> <li>Knowledge of and exposure to oil and gas sector</li> </ul> <p> <strong>Qualifications and specialist skills</strong> </p> <ul> <li>If not from a country where English is the official language, the candidate will provide proof (dated within the last 2 years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above</li> <li>Valid SIA Frontline Close Protection Licence</li> <li>Valid certificate for FPOS-I Level 4 and/or FREC Level 3 </li> </ul>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <br><p> <strong>Position Summary</strong> </p> <p>The Geology Advisor provides expert geological interpretation, reservoir characterization, and development planning support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract. </p> <p> <strong>Job Duties</strong> </p> <p>Under broad direction from the Subsurface Technical Manager:</p> <ul> <li>Develop and apply advanced development geology techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li> <li>Accountable for ensuring robust geological understanding of the asset, integrating static and dynamic data to guide reservoir management, field development, and production optimization.</li> <li>The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.)</li> <li>Role includes data analysis, reservoir characterization and mapping, determination of reservoir rock and fluid properties, static uncertainty/risk management analysis, deterministic/probabilistic in-place hydrocarbon volumetric calculations, static modeling, reserves estimation, and other work related to reservoir understanding / development.</li> <li>Lead the interpretation of geological, geophysical, petrophysical, and drilling data to develop robust static reservoir models. Integrating well log, core, seismic, and production data to define reservoir architecture, facies distribution, and structural framework.</li> <li>Solid grounding in development geology and working knowledge of geologic operations, logging, directional drilling, petrophysics, geophysics, rock and core sampling and analysis, reservoir simulation and drilling &amp; completions.</li> <li>Understands the fundamentals of petroleum engineering, subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li> <li>Collaborate with production and operations teams to identify and implement production enhancement opportunities. Additionally, translates technical insights into actionable operational and development plans.</li> <li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders .</li> <li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li> <li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li> <li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li> </ul> <p> </p> <p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><p style="font-size: 11px;"><br></p><ul style="font-size: 11px;"><li style="font-size: 11px;">Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc.</li><li style="font-size: 11px;">Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator</li><li style="font-size: 11px;">Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li></ul><p style="font-size: 11px;"></p><p style="font-size: 11px;">Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Geology Advisor, Geology Advisor, Sr, and Technical Manager.</p></li></ul>

<p><br></p><p> <strong>What makes you remarkable? </strong> </p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p> <p> <strong>Expected:</strong> </p> <ul> <li>Individuals with lesser experience may apply but require exceptional academic background and skills, involvement of HAZOP, HAZID,SIL.</li> <li>Strong commitment to safety.</li> <li>Good teamwork, problem solving and interpersonal skills </li> <li>Good organizational, coordination, planning, and interface skills</li> <li>Knowledge of crude oil production facilities (separators, desalter, exchangers, etc.)</li> <li>Knowledge of industry standards that apply to onshore oil and gas processing.</li> <li>Familiarity with SCADA, PI System, production surveillance tools, and operational reporting systems.</li> </ul> <p>Wood is recruiting for a Facilities Surveillance Engineer to join its Iraq business unit focusing on conducting daily production surveillance tasks of all production units at each Degassing Station, against approved KPIs on 5 days on 2 days off work schedule.</p> <p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p> <p><br></p><ul> </ul> <p> </p> <p> <strong> Job Objectives: </strong> </p> <ul> <li>Conduct daily production surveillance tasks of all production units at each Degassing Station, against approved KPIs.</li> <li>Monitor crude oil or effluent water treatment parameters to meet specifications.</li> <li>Work closely with Operations &amp; Maintenance and ensure Reliability improvement plan is prioritized and implemented.</li> <li>Resolve process bottlenecks and technical challenges.</li> </ul> <p> <strong>Operations Surveillance &amp; Production Support</strong> </p> <ul> <li>Conduct routine facility and process monitoring at Degassing Stations (DSs).</li> <li>Support the achievement of daily crude oil production and water injection targets while minimizing unplanned downtime.</li> <li>Provide technical support for production troubleshooting and debottlenecking activities.</li> <li>Lead and support production enhancement and water injection optimization initiatives.</li> <li>Coordinate with relevant departments to ensure facility issues are addressed and resolved in a timely manner.</li> <li>Perform Root Cause Failure Analysis (RCFA) for production-related issues and prepare investigation reports.</li> </ul> <p> <strong>Troubleshooting, RCFA &amp; Debottlenecking</strong> </p> <ul> <li>Develop Scope of Work documents (SIFs) for facility modification projects and review contractors' technical submissions and project deliverables.</li> <li>Work closely with project teams to provide operational and production expertise for crude oil processing projects, ensuring project deliverables meet facility operational requirements.</li> <li>Update and redline engineering documents, including P&amp;IDs and PFDs, based on field modifications and identified design discrepancies to ensure documentation accurately reflects actual plant conditions.</li> </ul> <p> <strong>Process Safety &amp; MOC</strong> </p> <ul> <li>Support the implementation of the Management of Change (MOC) process, assess the impact of facility modifications on process safety and operations, and provide recommendations to ensure safe and reliable execution of changes.</li> </ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>Expected:</strong> </p> <ul> <li>Bachelor's degree in Oil &amp; Gas Surface Engineering or related disciplines.</li> <li>Professional certificates recognized by the petroleum industry. </li> <li>7+ years relevant experience in facilities/operations conducting process engineering/facilities surveillance /troubleshooting /debottlenecking/ opportunity identification. </li> <li>Individuals with lesser experience may apply but require exceptional academic background and skills, involvement of HAZOP, HAZID,SIL.</li> <li>Strong commitment to safety.</li> <li>Good teamwork, problem solving and interpersonal skills </li> <li>Good organizational, coordination, planning, and interface skills</li> <li>Knowledge of crude oil production facilities (separators, desalter, exchangers, etc.)</li> <li>Knowledge of industry standards that apply to onshore oil and gas processing.</li> <li>Familiarity with SCADA, PI System, production surveillance tools, and operational reporting systems.</li> </ul>

<p>Wood is recruiting for a Quality Manager to join its Singapore Business Unit focusing on driving the implementation of company quality strategies and campaigns. <br> This role is a full-time office-based role in Basra, Iraq.</p> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com <br> <b>Diversity Statement </b> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. <p> <strong>What makes you remarkable? </strong> </p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p> <p> <strong>Expected:</strong> </p> <ul> <li>Degree in Engineering (Mechanical background is desirable)</li> <li> Membership of CQI or country specific Industry body (desirable)</li> <li> Quality Auditor Qualification by recognised industry body (essential)</li> <li> Welding inspector certification preferably CSWIIP 3.1 or equivalent (desirable)</li> <li> NDE Level II qualification (desirable)</li> </ul> <p> <strong>Minimum Experience:</strong> </p> <ul> <li>Minimum 15+ years Oil and Gas experience.</li> <li>Minimum 5 years in a QA role</li> <li>Previous Experience in a Lead or management position</li> <li>Exposure to Client Contracts desirably but not mandatory </li> </ul> <p> <strong>Job-Specific Skills:</strong> </p> <ul> <li>Good planning and organisational skills</li> <li> Proficient in Microsoft Office </li> <li>High level of communication skills in both written and spoken format</li> <li>Analytical, Problems Solving skills and Systematic thinking</li> <li>Demonstrated ability to work independently with good initiative and interpersonal skills</li> <li>Demonstrated ability to successfully interface with key stakeholders</li> <li>Ability to work within multi-cultural and environments</li> </ul> <p> <strong>Remarkable people, trusted by clients to design and advance the world.</strong> </p> <p>Wood is recruiting for a Quality Manager to join its Singapore Business Unit focusing on driving the implementation of company quality strategies and campaigns. <br> This role is a full-time office-based role in Basra, Iraq.</p> <p><br></p><ul> </ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>Expected:</strong> </p> <ul> <li>Degree in Engineering (Mechanical background is desirable)</li> <li> Membership of CQI or country specific Industry body (desirable)</li> <li> Quality Auditor Qualification by recognised industry body (essential)</li> <li> Welding inspector certification preferably CSWIIP 3.1 or equivalent (desirable)</li> <li> NDE Level II qualification (desirable)</li> </ul> <p> <strong>Minimum Experience:</strong> </p> <ul> <li>Minimum 15+ years Oil and Gas experience.</li> <li>Minimum 5 years in a QA role</li> <li>Previous Experience in a Lead or management position</li> <li>Exposure to Client Contracts desirably but not mandatory </li> </ul> <p> <strong>Job-Specific Skills:</strong> </p> <ul> <li>Good planning and organisational skills</li> <li> Proficient in Microsoft Office </li> <li>High level of communication skills in both written and spoken format</li> <li>Analytical, Problems Solving skills and Systematic thinking</li> <li>Demonstrated ability to work independently with good initiative and interpersonal skills</li> <li>Demonstrated ability to successfully interface with key stakeholders</li> <li>Ability to work within multi-cultural and environments</li> </ul>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <ul> <li>Manages the Government Relations Department and is responsible for the coordination of all activities relating to the department.</li> <li>May also undertake general administrative and facilities responsibilities and may assist the HR Department with localization planning and local hire resourcing.</li> <li>Advises on local labor relations and social issues.</li> <li>Requires high level contact with appropriate government officials and thorough knowledge of government procedures and local labor law.</li> </ul> <p> </p> <b>Qualifications</b> <p>Written and verbal fluency in English is essential. Requires 8+ years of experience with a higher level college education preferred.</p><p><strong>Desired Candidate Profile</strong></p><p>Written and verbal fluency in English is essential. Requires 8+ years of experience with a higher level college education preferred.</p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <p> <strong>Under general supervision:</strong> </p> <ul> <li>From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset.</li> <li>Establishes scope of work with site customer and site representative.</li> <li>Checks design documentation for adequacy to specific site conditions and agreed scope of work.</li> <li>Proposes engineering adjustments to site condition as required.</li> <li>Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion.</li> <li>Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice.</li> <li>Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter.</li> <li>Prepares periodic reports for upper management.</li> </ul> <p> </p> <p> <strong>Additional Role Responsibilities:</strong> </p> <p>(1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; <br>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; <br>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; <br>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; <br>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team; <br>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; <br>(7). Monitor and operate the SAP/CMMS system. <br>(8). Contribute and participate in successful completion of plant improvements; <br>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Manager in case of emergency. <br>(10). Control, minimize and monitor flare losses &amp; waste generation. <br>(11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. <br>(12). Identify team and individuals limitations and develop contingency plans to address any short fall. </p> <b>Qualifications</b> <p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields.</p> <p> </p> <p> <strong>Relevent experience is highliy desirable:</strong> <br> Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. <br> Recognized International Qualifications (NVQ, C&amp;G, OPITO etc)<br> Valid Emergency Response competence<br> CMMS/SAP Experience <br> Coaching &amp; Development Experience (Competence Assessors preferred) <br> Commissioning experience<br> Experience from similar challenging environments. (Wells experience a must for production operations personnel)<br> Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.)<br> Internationally recognized driving license<br> Good English skills, Arabic speaking advantageous<br> ISSOW/PTW experience <br> </p> <p>rience.</p><p><strong>Desired Candidate Profile</strong></p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields.<br><br><strong>Relevent experience is highliy desirable:</strong> <br> Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. <br> Recognized International Qualifications (NVQ, C&amp;G, OPITO etc)<br> Valid Emergency Response competence<br> CMMS/SAP Experience <br> Coaching &amp; Development Experience (Competence Assessors preferred) <br> Commissioning experience<br> Experience from similar challenging environments. (Wells experience a must for production operations personnel)<br> Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.)<br> Internationally recognized driving license<br> Good English skills, Arabic speaking advantageous<br> ISSOW/PTW experience <br>

<p>The role</p><p>This is an exciting opportunity for an experienced PTW Coordinator to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region. What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones Job Purpose: Responsible for the daily coordination of the Permit to Work (PTW) system for startup operations. Maintain proper records of all permits and associated certificates raised in connection with operation and facility construction activities. Engage with O &amp; M, Construction &amp; Commissioning teams in the on-site monitoring and auditing of permit to work activities. Key Responsibilities: Awareness of priorities, planning and scheduling of works scopes with responsibility to prepare and review all work permit documentation including JSA s and Site Hazard assessments. Verify permits prior to approval by management team. Identification of plant, equipment, and process isolation requirements within the bounds of the Permit to Work System and in accordance with the O&amp;M Isolation Rules. Liaise with isolating authorities to ensure isolations are implemented Carry out Risk Assessment exercises and direct teams in Toolbox Talks as appropriate. Under direct instruction from O&amp;M Superintendents issue authorized permits. Monitor simultaneous and adjacent work scopes. Resolve of any conflicts between work scopes. Participation in worksite inspections and PTW audits. Ensure that all work permits issued are cross referenced (where applicable) to all interacting activity, and that all concurrent activities are carried out safely. Interface with FOD Operations on Brownfield projects to ensure proper permits are in place and the process is seamless minimizing work delays. Assist with coordination and forward planning to ensure that all permit requirements are pre-planned ready for start of next day's work. Taking a lead role in ensuring the SIMOPS is not compromised by the issue of conflicting permits. Tracks work permits through the entire life cycles from initiation to completion/close-out. Ensure record-keeping requirements are met. Maintains daily permit log, listing permit types issues, location and scope of work. Facilitate and participate in higher level PTW audits.</p><p><strong>Desired Candidate Profile</strong></p><p>Expected: Technical Diploma/ 10 years of Experience, Literate in the use of standard computer software programs. Word, Excel, etc English Communication skills / Team player/ Time-Management / Adaptability / Willingness to learn. Understanding of Oil &amp; Gas Process Operations, HSE practices and application in the field.</p>

<p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management.</p><p>Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. (10). Control, minimize and monitor flare losses &amp; waste generation. (11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall.</p><p>Qualifications Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61006, Iraq Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience