Remote Jobs in Iraq
27 Jobs Found
Save and set alert for similar positionsManage alerts
<p><h4>Job description</h4>
<p>The HVAC/R supervisor will be based at one of three Amentum sites in Iraq and support the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The HVAC/R supervisor is responsible for oversight of all site HVAC/R operations, including maintenance, repair, and installation of environmental control systems. This role requires practical knowledge of refrigeration theory, pipefitting, system layout, and troubleshooting.</p>
<p>This position is responsible for the overall operation and maintenance of HVAC/R equipment and systems and reports directly to the O&M manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p>
<h4>Duties:</h4>
<ul>
<li>Responsible for maintaining a safe workplace and ensuring safety remains the highest priority</li>
<li>Comply with all Environmental Health & Safety (EHS) and Quality Assurance requirements</li>
<li>Provide necessary information and documentation to ensure compliance with applicable standards</li>
<li>Operate, maintain, and repair site HVAC/R systems including, but not limited to: air-cooled chillers, direct expansion units, air handling units, filters (including chemical biological filters where applicable), ductwork, dampers, actuators, fans, chilled water lines, heating and cooling systems, fan coil units, electric reheats, diffusers, vents, VAV boxes, exhaust systems, control valves, cooling coils, and ventilation systems supporting facilities such as laundry rooms, kitchens, and restrooms</li>
<li>Schedule personnel, including shifts and rotations, to maintain required service levels</li>
<li>Assign tasks and enforce standards of conduct and performance</li>
<li>Inspect and audit work in progress and completed work to ensure compliance with codes, quality standards, and customer expectations</li>
<li>Manage tools, equipment, and inventory to maintain accountability and support operational needs</li>
<li>Complete required reports, both quantitative and qualitative</li>
<li>Provide input on policies, procedures, and administrative requirements</li>
<li>Install and mount compressors, condenser units, and air handling equipment in accordance with engineering specifications and manufacturer recommendations</li>
<li>Maintain custodianship of assigned work areas, tools, equipment, and spare parts</li>
<li>Perform additional duties and special projects as assigned</li>
</ul>
<h4>Required:</h4>
<p><strong>Minimum acceptable experience level:</strong></p>
<ul>
<li>Ten (10) years of HVAC/R experience, including at least four (4) years in a supervisory or lead role; or</li>
<li>Equivalent combination of technical training, certifications, and hands-on HVAC/R experience</li>
</ul>
<p>Experience may be demonstrated through field work, vocational training, apprenticeship programs, or industry-recognized certifications.</p>
<p><strong>Knowledge, skills, and abilities:</strong></p>
<ul>
<li>Knowledge of applicable U.S. codes and International Mechanical Code (IMC) standards</li>
<li>Strong understanding of HVAC/R systems, operations, and repairs</li>
<li>Familiarity with supporting contract operations in an overseas environment</li>
<li>Ability to work in a fast-paced environment while managing multiple priorities</li>
<li>Cross-cultural awareness and ability to work within a diverse workforce</li>
<li>Strong organizational and time management skills</li>
<li>Proficiency in Microsoft Word and Excel</li>
<li>Ability to work effectively as part of a team</li>
<li>Strong communication skills, both verbal and written</li>
</ul>
<p><strong>Education:</strong></p>
<ul>
<li>High school diploma or GED required</li>
<li>HVAC vocational training, apprenticeship completion, or equivalent experience</li>
</ul>
<p><strong>Passport, licenses and certifications:</strong></p>
<ul>
<li>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages</li>
<li>Valid drivers’ license from home of record</li>
<li>EPA Section 608 certification required</li>
<li>HVAC licensing or certification is preferred; however, candidates without a formal license may qualify based on experience and demonstrated technical expertise</li>
<li>Candidates must be able to obtain any required certifications or credentials within 180 days of employment, if applicable</li>
</ul>
<p><strong>Security vetting:</strong> Must be able to obtain and maintain a Secret US Government clearance. Note: US citizenship is required to obtain a Secret clearance.</p>
<p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p>
<p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p>
<h4>Desired:</h4>
<ul>
<li>Previous overseas experience</li>
<li>Experience working in austere or harsh environments</li>
<li>Prior experience with Amentum or similar contracts</li>
</ul>
<h4>Other responsibilities:</h4>
<p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p>
<p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p>
<p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p>
<h4>Working and living conditions:</h4>
<p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p>
<p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>
<p><h4>Job description</h4>
<p>The HVAC/R supervisor will be based at one of three Amentum sites in Iraq and support the operations and maintenance support services (OMSS) contract in support of the U.S. Department of State. The HVAC/R supervisor is responsible for oversight of all site HVAC/R operations, to include maintenance, repair, and installation of environmental control systems. This role requires practical knowledge of refrigeration theory, pipefitting, system layout, and troubleshooting.</p>
<p>This position is responsible for the overall operation and maintenance of HVAC/R equipment and systems and reports directly to the O&M manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p>
<h4>Duties:</h4>
<ul>
<li>Responsible for maintaining a safe workplace and ensuring safety remains the highest priority</li>
<li>Comply with all environmental health & safety (EHS) and quality assurance requirements</li>
<li>Provide necessary information and documentation to ensure compliance with applicable standards</li>
<li>Operate, maintain, and repair site HVAC/R systems including, but not limited to: air-cooled chillers, direct expansion units, air handling units, filters (including chemical biological filters where applicable), ductwork, dampers, actuators, fans, chilled water lines, heating and cooling systems, fan coil units, electric reheats, diffusers, vents, VAV boxes, exhaust systems, control valves, cooling coils, and ventilation systems supporting facilities such as laundry rooms, kitchens, and restrooms</li>
<li>Schedule personnel, including shifts and rotations, to maintain required service levels</li>
<li>Assign tasks and enforce standards of conduct and performance</li>
<li>Inspect and audit work in progress and completed work to ensure compliance with codes, quality standards, and customer expectations</li>
<li>Manage tools, equipment, and inventory to maintain accountability and support operational needs</li>
<li>Complete required reports, both quantitative and qualitative</li>
<li>Provide input on policies, procedures, and administrative requirements</li>
<li>Install and mount compressors, condenser units, and air handling equipment in accordance with engineering specifications and manufacturer recommendations</li>
<li>Maintain custodianship of assigned work areas, tools, equipment, and spare parts</li>
<li>Perform additional duties and special projects as assigned</li>
</ul>
<h4>Required:</h4>
<p><strong>Minimum acceptable experience level:</strong></p>
<ul>
<li>Ten (10) years of HVAC/R experience, including at least four (4) years in a supervisory or lead role; or</li>
<li>Equivalent combination of technical training, certifications, and hands-on HVAC/R experience</li>
</ul>
<p>Experience may be demonstrated through field work, vocational training, apprenticeship programs, or industry-recognized certifications.</p>
<p><strong>Knowledge, skills, and abilities:</strong></p>
<ul>
<li>Knowledge of applicable U.S. codes and International Mechanical Code (IMC) standards</li>
<li>Strong understanding of HVAC/R systems, operations, and repairs</li>
<li>Familiarity with supporting contract operations in an overseas environment</li>
<li>Ability to work in a fast-paced environment while managing multiple priorities</li>
<li>Cross-cultural awareness and ability to work within a diverse workforce</li>
<li>Strong organizational and time management skills</li>
<li>Proficiency in Microsoft Word and Excel</li>
<li>Ability to work effectively as part of a team</li>
<li>Strong communication skills, both verbal and written</li>
</ul>
<p><strong>Education:</strong></p>
<ul>
<li>High school diploma or GED required</li>
<li>HVAC vocational training, apprenticeship completion, or equivalent experience</li>
</ul>
<p><strong>Passport, licenses and certifications:</strong></p>
<ul>
<li>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages</li>
<li>Valid drivers’ license from home of record</li>
<li>EPA Section 608 certification required</li>
<li>HVAC licensing or certification is preferred; however, candidates without a formal license may qualify based on experience and demonstrated technical expertise</li>
<li>Candidates must be able to obtain any required certifications or credentials within 180 days of employment, if applicable</li>
</ul>
<p><strong>Security vetting:</strong> Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</p>
<p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p>
<p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p>
<h4>Desired:</h4>
<ul>
<li>Previous overseas experience</li>
<li>Experience working in austere or harsh environments</li>
<li>Prior experience with Amentum or similar contracts</li>
</ul>
<h4>Other responsibilities:</h4>
<ul>
<li><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li>
<li><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li>
<li><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li>
</ul>
<h4>Working and living conditions:</h4>
<p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p>
<p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>
<p><h4>Job Description</h4>
<p>The quality construction inspector will support the U.S. Department of State contract in Iraq. Under specific direction, the inspector will apply knowledge and experience of facility systems in the construction and modification of horizontal and vertical applications and support services for LCC department. They will demonstrate knowledge of setting and meeting key performance indicators, to include the verification of compliance metrics in preliminary laydown, during construction phases and then final and acceptance inspections, utilizing the framework Amentum standards, OBO and DoS policies and regulations, local and international construction codes and standards (ICCS).</p>
<p>This position will be responsible for providing oversight and collaboration of standards at construction sites, with the monitoring of construction teams, providing oversight in mechanical, electrical and plumbing functions, directing inspections and managing work requirements, utilizing skills and knowledge requiring flexibility, adaptability, and responsiveness. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p>
<h4>Duties:</h4>
<ul>
<li>Provide specific support of construction techniques and improvements and facilitate verification of products and/or service support applications, recommend training, tools, and methods for sound and safe construction principles.</li>
<li>Align the quality management function with the performance needs of the product line and/or service support application.</li>
<li>Manage and maintain project portfolios, adhere to policies and procedures, the basis being ISO 9001:2015 standard requirements, understand OBO and DoS maintenance practices and policies, and USACE requirements.</li>
<li>Maintain an audit schedule, and perform audits of procedures, reporting requirements, plans, programs, and keeping records, reviewing cut sheets, horizontal and vertical building codes.</li>
<li>Conduct site inspection, verification of safety practices and procedures, material deliveries and product/materials standards.</li>
<li>Record data and analyze performance of material testing, hardness, and slump testing, project change bulletins and change orders.</li>
<li>Track deficiencies and work with management to define corrective action plans and close out deficiencies, understand CAPA principles and methods.</li>
<li>Collect and analyze data to determine performance trends on mechanical, electrical and plumbing systems and assist in-house teams in repairs, oversee and direct sub-contractors work and products, be aware of new product lines, parts and manufacturing techniques.</li>
<li>Prepare and provide daily, weekly and monthly reports to management, document progress and compliance by reporting and photographs, must obtain RSO photo badge approval.</li>
<li>Ensure quality-related training is provided by the program and sub-contractor employees.</li>
<li>Implement, maintain program instructions, plans, and SOPs. Ensure archives and libraries are reviewed and revised on a planned and scheduled timetable.</li>
</ul>
<h4>Required:</h4>
<p><strong>Minimum acceptable experience level:</strong></p>
<ul>
<li>Five (5) years’ experience in quality assurance/control in construction projects.</li>
<li>Five (5) years’ experience as a quality management professional, supporting a DoD or DoS program.</li>
<li>At least two (2) years’ international experience in challenging locations, preferably the Middle East.</li>
</ul>
<p><strong>Knowledge, skills, and abilities:</strong></p>
<ul>
<li>Knowledge of all principles and processes involved in quality construction management.</li>
<li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li>
<li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures, a basic understanding of local customs and culture and language.</li>
<li>Exercise sound judgment and make decisions independently and be able to take direction from leadership.</li>
<li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules, at multiple sites and projects.</li>
<li>Must have excellent people skills, organizational and time management abilities.</li>
<li>Expert computer skills, specifically in Microsoft Word, PowerPoint, and Excel.</li>
<li>Ability to become an active and functioning member of a team.</li>
<li>Ability to be innovative and be an agent for change.</li>
</ul>
<p><strong>Education/Certification:</strong> Certification of quality construction inspector, or eight (8) years’ related experience and/or education.</p>
<p><strong>Licenses and certifications:</strong> ISO 9001:2015 certification. Valid driver's license from home of record.</p>
<p><strong>Security vetting:</strong> Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</p>
<p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p>
<p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p>
<h4>Other responsibilities:</h4>
<ul>
<li><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li>
<li><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li>
<li><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li>
</ul>
<h4>Working and living conditions:</h4>
<p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit / 50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p>
<p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Overview **This position will be physically located in Balad, Iraq** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the PSM Director and Task Order Manager. Manages the 10 life cycle outcomes of Property Management for the V2X and the program in accordance with FAR Clause 52.245-1, Performance Work Statement, and the Property Management Plan. Manage the company fiduciary accounts with the Theater Property and the Installation Property Book Office ensuring accuracy and compliance of records. Coordinate transfers and support to the customer in accordance with AR735-5 for property and materiel responsibility transfers. Must be able to maintain a professional transparent relationship with auditing agency ensuring timely submissions and responses to all requested actions. Provides guidance on government regulations pertaining to property accountability; develops, recommends and implement property administration policy. Provide training, mentoring, effective and efficient management of all Government Furnished Property, Company Acquired Property for V2X. Coordinate with Property Custodians to ensure and maintain 100% accountability of Government Property in accordance with applicable Government regulations and V2X Property Management Plan. Ensures compliance with prescribed V2X Property Management Plan, Performance Work Statement, and Federal Acquisition Regulations. Provide the government with routine, monthly, special, and annual reports. Maintain an IUID registry for all assets procured or transferred that meets the governments requirements. Ensures all Government Furnished Property and Materials(GFP/GFM) and Contractor Acquired Property and Materials(CAP/CAM) are properly tracked, documented, and identified in V2X Property Book records. Maintain 100% accountability of all company property records through the Maximo Implementation System and must have knowledge of Army Supply System including DLIS Fed log. Provides management direction, training and oversight to include overseeing day to day property control operations; may include but not limited to Custodial record management, CDRL reporting, administrative adjustment reports, cyclic inventory reporting, proper storage of property and materials, sensitive items inventories, receiving, shipping and preparation of all supporting documentation. Routinely visits all work locations to provide assistance, perform assessments, and ensure that the program is being managed properly and effectively in accordance with prescribed directives. Perform duties involving requesting, receiving, issuing, accountability, and preservation of all GFP, GFM, CAP, CFM, and review complete work for accuracy and compliance with established procedures. Provide technical assistance to departments and upper management as needed. Manage and maintain through periodic maintenance, administrative records and submit program status reports IAW established project operating procedures (POP), standard operating procedures (SOP), work instructions (WI) and the contract. Perform duties involving LOSS process through the Property Administrator Reach Back Program, and request for Letter of Technical Direction (LOTD) for gains or losses for assets and materials not procured or disposed of by routine methods. Performs other duties as required. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Manages the 10 life cycle outcomes of Property Management for the V2X, program in accordance with FAR Clause 52.245-1, Performance Work Statement, and the Property Management Plan. + Manage the company fiduciary accounts with the Theater Property and the Installation Property Book Office ensuring accuracy and compliance of records. + Coordinate transfers and support to the customer in accordance with AR 735-5 for property and materiel responsibility transfers. + Must be able to maintain a professional transparent relationship with auditing agency ensuring timely submissions and responses to all requested actions. + Provides guidance on government regulations pertaining to property accountability; develops, recommends and implement property administration policy. + Provide training, mentoring, effective and efficient management of all Government Furnished Property and Company Acquired Property for V2X. Qualifications + Education/Experience Requirements: One year related experience may be substituted for one year of education, if degree is required. + Bachelor’s degree and two years’ experience or High School diploma and eight years’ experience. + A minimum certification of a Certified Property Professional Administrator from the National Property Management Agency or be able to obtain within one year. + A valid driver’s license from home country and base driver’s license, is required. + Experience: Minimum of 6 years specialized experience in property management operations. + Minimum of 5 years supervisory experience in property management operations. + Must be familiar and able to train Property Management operating systems. + Must be familiar with appropriate FAR, DFAR’s, AR’s (Army Regulations) and correct publications concerning 10 Life cycle outcomes. + Skills + Must exhibit strong organization and communication skills. + Must feel comfortable delegating and possess skills to include scheduling workers, keeping track of staffing and keeping their staff motivated. + The most significant experience is education or training from work experience in a related occupation. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Sedentary work. Exerting up to 10 pounds of force occasionally and/or negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, including the human body. Sedentary work involves sitting most of the time. Jobs are sedentary if walking and standing are required only occasionally and all other sedentary criteria are met.. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>
<p><h4>Driver operator, firefighter (F N)</h4>
<p>The driver operator, firefighter will be primarily based at Baghdad Embassy Compound (BEC) in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. The driver operator will be responsible for utilizing resources to accomplish operational requirements and will report to their assigned crew chief, assistant site chief and/or the site chief. The additional duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive:</p>
<h4>Duties:</h4>
<ul>
<li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li>
<li>Comply with all environmental health & safety and quality assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li>
<li>Serve as a driver/operator for structural firefighter and HAZMAT responder on a scheduled rotation.</li>
<li>Participate in fire and emergency services activities including fire suppression, EMS, rescue, public assistance, fire investigation, fire prevention, pre-fire planning, fire company training, public education, clinical training and routine maintenance of apparatus, equipment and facilities.</li>
<li>Support emergency management functions as needed.</li>
<li>Assist in activities within the department and collaborate with other departments to support operational needs, ensure effective communication, and contribute to overall mission success.</li>
<li>Perform additional duties and projects assigned.</li>
</ul>
<h4>Other duties:</h4>
<p>This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice and you may be requested to perform other duties as assigned.</p>
<h4>Required:</h4>
<p><strong>Minimum acceptable experience level:</strong> One to five (1-5) or more years of driver/operator – firefighter experience.</p>
<h4>Knowledge, skills, and abilities:</h4>
<ul>
<li>Knowledge of all principles and processes involved in fire and emergency services, with the ability to maintain all required certifications and licensures.</li>
<li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li>
<li>Exercise sound judgment and make decisions independently.</li>
<li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li>
<li>Computer skills, specifically in use of Microsoft Word and Excel.</li>
<li>Cross-cultural sensitivity with an international perspective.</li>
<li>Ability to become an active and functioning member of a team.</li>
<li>Ability to be innovative and be an agent for change.</li>
<li>Expert communication skills to facilitate and disseminate information.</li>
</ul>
<p><strong>Education:</strong> A high school diploma or GED.</p>
<p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining until the expiration date with 8 blank pages.</p>
<ul>
<li>Valid drivers’ license from home of record.</li>
<li>EMR first responder and CPR certified.</li>
<li>IFSAC, ProBoard or DOD:
<ul>
<li>Fire Fighter I</li>
<li>Fire Fighter II</li>
<li>Airport Fire Fighter</li>
<li>Apparatus Driver/Operator for Pumper and Mobile Water Supply vehicles.</li>
<li>HazMat Awareness and Operations</li>
</ul>
</li>
<li>Telecommunicator I and II are preferred.</li>
</ul>
<p><strong>Security vetting:</strong> Already possess a US government issued security clearance or moderate risk public trust (MRPT) or be able to obtain a favorable MRPT certification or US government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p>
<p><strong>Language skills:</strong> Expert comprehension of both oral and written English communication skills to present, facilitate, and disseminate information.</p>
<p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p>
<p><strong>Work ethic:</strong> Commitment to maintaining a high-performance team which delivers customer service excellence.</p>
<h4>Desired:</h4>
<ul>
<li>Two (2) years’ international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li>
<li>Prefer Telecommunicator I and II.</li>
<li>Experience working with the employer.</li>
</ul>
<h4>Other knowledge, skills and abilities:</h4>
<ul>
<li>Knowledge of all principles and processes involved in fire and emergency services, with the ability to maintain all required certifications and licensures.</li>
<li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li>
<li>Exercise sound judgment and make decisions independently.</li>
<li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li>
<li>Computer skills, specifically in use of Microsoft Word and Excel.</li>
<li>Must have the ability to be innovative and be an agent for change.</li>
</ul>
<h4>Other responsibilities:</h4>
<ul>
<li><strong>Safety:</strong> The employer enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li>
<li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li>
<li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li>
</ul>
<h4>Working and living conditions:</h4>
<p>This position may be in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 24 hours a day, 7 days a week, 365 days a year. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and “duck & cover” during emergencies without putting oneself or others at risk.</p>
<p>Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status.</p>
<p>The employer is a drug-free workplace.</p></p><p></p>
<p><h4>Job Description</h4>
<p>The quality construction inspector will support the U.S. Department of State contract in Iraq. Under specific direction, the inspector will apply knowledge and experience of facility systems in the construction and modification of horizontal and vertical applications and support services for LCC department. They will demonstrate knowledge of setting and meeting key performance indicators, to include the verification of compliance metrics in preliminary laydown, during construction phases and then final and acceptance inspections, utilizing the framework Amentum standards, OBO and DoS policies and regulations, local and international construction codes and standards (ICCS).</p>
<p>This position will be responsible for providing oversight and collaboration of standards at construction sites, with the monitoring of construction teams, providing oversight in mechanical, electrical and plumbing functions, directing inspections and managing work requirements, utilizing skills and knowledge requiring flexibility, adaptability, and responsiveness. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p>
<h4>Duties:</h4>
<ul>
<li>Provide specific support of construction techniques and improvements and facilitate verification of products and/or service support applications, recommend training, tools, and methods for sound and safe construction principles.</li>
<li>Align the quality management function with the performance needs of the product line and/or service support application.</li>
<li>Manage and maintain project portfolios, adhere to policies and procedures, the basis being ISO 9001:2015 standard requirements, understand OBO and DoS maintenance practices and policies, and USACE requirements.</li>
<li>Maintain an audit schedule, and perform audits of procedures, reporting requirements, plans, programs, and keeping records, reviewing cut sheets, horizontal and vertical building codes.</li>
<li>Conduct site inspection, verification of safety practices and procedures, material deliveries and product/materials standards.</li>
<li>Record data and analyze performance of material testing, hardness, and slump testing, project change bulletins and change orders.</li>
<li>Track deficiencies and work with management to define corrective action plans and close out deficiencies, understand CAPA principles and methods.</li>
<li>Collect and analyze data to determine performance trends on mechanical, electrical and plumbing systems and assist in-house teams in repairs, oversee and direct sub-contractors work and products, be aware of new product lines, parts and manufacturing techniques.</li>
<li>Prepare and provide daily, weekly and monthly reports to management, document progress and compliance by reporting and photographs, must obtain RSO photo badge approval.</li>
<li>Ensure quality-related training is provided by the program and sub-contractor employees.</li>
<li>Implement, maintain program instructions, plans, and SOPs. Ensure archives and libraries are reviewed and revised on a planned and scheduled timetable.</li>
</ul>
<h4>Required:</h4>
<p><strong>Minimum acceptable experience level:</strong></p>
<ul>
<li>Five (5) years’ experience in quality assurance/control in construction projects.</li>
<li>Five (5) years’ experience as a quality management professional, supporting a DoD or DoS program.</li>
<li>At least two (2) years’ international experience in challenging locations, preferably the Middle East.</li>
</ul>
<p><strong>Knowledge, skills, and abilities:</strong></p>
<ul>
<li>Knowledge of all principles and processes involved in quality construction management.</li>
<li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li>
<li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures, a basic understanding of local customs, culture and language.</li>
<li>Exercise sound judgment and make decisions independently and be able to take direction from leadership.</li>
<li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules, at multiple sites and projects.</li>
<li>Must have excellent people skills, organizational and time management abilities.</li>
<li>Expert computer skills, specifically in Microsoft Word, PowerPoint, and Excel.</li>
<li>Ability to become an active and functioning member of a team.</li>
<li>Ability to be innovative and be an agent for change.</li>
</ul>
<p><strong>Education/Certification:</strong> Certification of quality construction inspector, or eight (8) years’ related experience and/or education.</p>
<p><strong>Licenses and certifications:</strong> ISO 9001:2015 certification. Valid driver’s license from home of record.</p>
<p><strong>Security vetting:</strong> Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</p>
<p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p>
<p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p>
<h4>Other Responsibilities:</h4>
<ul>
<li><strong>Safety:</strong> Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li>
<li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li>
<li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li>
</ul>
<h4>Working and Living Conditions:</h4>
<p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit / 50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p>
<p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Important Employment Information This role is located in Baghdad and will be hired through a third-party employment provider, as Atlas Copco does not maintain a legal entity or Customer Center in the country. While administrative processes such as contracts and payroll will be handled externally, your day-to-day operations will be fully connected to the Turkiye Customer Center, reporting to the Business Line Manager in Turkiye. Your role As an Area Sales Engineer, your mission is to develop sales and market our products in Baghdat Iraq by leveraging your technical expertise and understanding of customer needs. You will report to the Business Line Manager and work closely with product teams to ensure successful execution of sales strategies. You will: Establish and manage channel partners through the distribution network. Conduct market research and identify opportunities in the assigned region. Generate product requirements and determine regional specifications. Coordinate production timetables, pricing, and plans for product introduction. Develop marketing strategies and manage dealer relationships. Deliver product training and support after-sales activities. Drive sales for Portable Compressors, Handheld Tools, Generators, Pumps, and Light Towers and Aftermarket Products. To succeed, you will need You have: 3+ years of experience working as a Sales Engineer or in a similar technical-commercial role. A university degree in Engineering, Marketing, or Business Management (preferably mechanical, electrical, or industrial engineering) Non-negotiable skills: Strong technical know-how and marketing knowledge. Ability to develop and execute sales strategies, including dealer management and channel development. Fluency in English (written and verbal) and a valid local driving license. Preferred skills: Experience in market research and determining customer needs through data collection and analysis. Ability to recommend product scope, review specifications, and appraise new product ideas or packaging changes. Skilled in competitor analysis and defining product marketing communication objectives. Experience in preparing short- and long-term sales forecasts, special reports, and answering management requests. Ability to manage inventory turnover and product availability through forecasting and production schedule alignment. Expertise in pricing strategies using market research data and cost analysis for customized orders. Familiarity with digitalization tools and platforms for product development, sales, and marketing activities. Strong understanding of product management and value creation principles. Excellent presentation, communication, and relationship-building skills. Advanced computer skills (MS Office) and adaptability to new technologies. Additional responsibilities include: Regular dealer and end-user visits, product training, and after-sales support. Selling and promoting service products (e.g., maintenance parts, kits, lubricants). Building and maintaining strong business relationships with customers and distributors. Maintaining professional and technical knowledge by attending workshops, reviewing publications, and networking. Contributing to team efforts and performing other duties as directed by management. In return, we offer Culture of trust and accountability Lifelong learning and career growth Innovation powered by people Comprehensive compensation and benefits Health and well-being Job location This role is fully remote, enabling you to work from anywhere within the region of Baghdad, while being associated with our customer center in Turkiye.</span> </div>
Receive email alerts for Remote Jobs in Iraq jobs
You can cancel your email alert at anytime