Electronics Engineer Jobs in Iraq
202 Jobs Found
Save and set alert for similar positionsManage alerts
<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for a Process Engineer to join its Iraq business unit focusing on executing process engineering activities in accordance with applicable HSEQ requirements, project procedures, regulatory requirements, industry codes, and engineering standards. This role is a full-time on-site role in Basra, Iraq with travel requirement. <br><strong>Reports to:</strong> Lead Process Engineer</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Process Engineer to join its Iraq business unit focusing on executing process engineering activities in accordance with applicable HSEQ requirements, project procedures, regulatory requirements, industry codes, and engineering standards. This role is a full-time on-site role in Basra, Iraq with travel requirement. <br><strong>Reports to:</strong> Lead Process Engineer</p><br><p><i><strong>#Wood #Iraq #Basra #Process Engineer </strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Process Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects </strong></p><br><p><strong>Designing the future. Transforming the world. </strong></p><br><p>Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering & Design Services. The Vision of this Contract is to enhance the production & assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery & Replacement/upgrade of obsolete equipment, piping & systems.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li><strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones </li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p>As a Process Engineer, you will support the delivery of process engineering activities throughout the project lifecycle. You will: </p><br><ul> <li>Execute process engineering activities in accordance with applicable HSEQ requirements, project procedures, regulatory requirements, industry codes, and engineering standards. </li> <li>Prepare and review key process engineering deliverables, including design basis documents, BFDs, PFDs, P&IDs, heat and material balances, process simulations, process datasheets, equipment and line lists, process descriptions, and control and safeguarding philosophies. </li> <li>Perform process calculations, equipment sizing, hydraulic assessments, relief and depressurization studies, facility capacity evaluations, and other technical assessments required by the project scope. </li> <li>Participate in site visits, facility walkdowns, field data collection, and as-built verification activities to confirm existing facility conditions and obtain the information required for engineering studies and project execution.</li> <li>Identify discrepancies between existing field conditions and available engineering documentation and support the preparation and updating of accurate as-built process documents. </li> <li>Identify and implement improvement to plant facilities, processes, methods of operations and turnaround, troubleshoot for process and equipment problems to minimize safety and quality risk as well as to ensure greater operational efficiency. </li> <li>Participate in design reviews, HAZOPs, and other process safety and technical assessments </li> <li>Ensure deliverables are prepared and checked in accordance with applicable standards and project requirements </li> <li>Work collaboratively with multidisciplinary teams, including piping, mechanical, and instrumentation engineers</li> <li>Interface with clients, facility operators, vendors, contractors, and other stakeholders as required.</li></ul><p><strong>Executes Assigned Scopes of Work: </strong></p><br><ul> <li>Establishes detailed designs and performance specifications to fulfill the requirements of assigned general specifications for components, systems, processes, etc. </li> <li>Plans and carries out successive steps and handles problems with general guidance from instructions, policies and precedents </li> <li>Responsible for meeting discipline cost and schedule requirements in production of dliverables, coordinates own work schedule, and prepares progress reports. </li> <li>Prepares process calculations, simulations, PFDs, P&IDs, datasheets, specifications, reports, technical requisitions, and other process engineering deliverables. </li> <li>Performs process studies, equipment sizing, hydraulic calculations, facility capacity assessments, and evaluation of existing process systems. </li> <li>Participates in site surveys, facility walkdowns, field data collection, as-built verification, and preparation of site survey reports where required. </li> <li>Identifies discrepancies between site conditions and existing engineering documentation and supports the updating of as-built documents. </li> <li>Interprets specifications and investigates difficulties </li> <li>Reviews vendor documents </li> <li>Active participation in design reviews</li></ul><p><strong>Process Design and Engineering Studies:</strong> </p><br><ul> <li>Prepare and review BFDs, PFDs, P&IDs, utility flow diagrams, heat and material balances, equipment lists, line lists, and process datasheets. </li> <li>Prepare process design basis documents, process descriptions, operating philosophies, control philosophies, safeguarding philosophies, and shutdown philosophies. </li> <li>Perform steady-state process simulations and other simulations as required by the project scope. </li> <li>Undertake equipment and system sizing calculations for separators, vessels, tanks, columns, heat exchangers, pumps, compressors, control valves, restriction orifices, relief devices, and other process equipment, as applicable.</li> <li>Perform hydraulic calculations for process piping, pipelines, flowlines, utility systems, relief systems, and flare systems, where applicable. </li> <li>Evaluate the adequacy and capacity of existing process equipment and systems against revised production profiles, fluid properties, operating conditions, and project requirements. </li> <li>Compare engineering alternatives based on process safety, technical performance, operability, maintainability, constructability, cost, schedule, and impact on existing operations. </li> <li>Document the basis, assumptions, calculation methods, limitations, and conclusions of engineering assessments.</li></ul><p><strong>Providing discipline expertise: </strong></p><br><ul> <li>Conducts problem solving in the area of expertise: problems involve new concepts and new and varied problems to be solved that demand technical expertise, investigation and interpretation </li> <li>Develops alternative solutions, identifies risks and benefits </li> <li>Develops solutions to non-recurring problems by appraising, interpreting and evaluating various precedents and data. </li> <li>Exercises professional judgement in selecting and interpreting information and modifying standard methods and procedures </li> <li>In consultancy business areas, may deliver small-scale projects with responsibility for cost, schedule, resource allocation and risk, while working within an established program management plan. </li> <li>Provide technical input and support to proposals as required </li> <li>Provides process engineering support for facility performance, operational troubleshooting, process safety, and plant improvement activities. </li> <li>Coordinates with other engineering disciplines, operations personnel, clients, contractors, and vendors to resolve technical issues.</li></ul><p><strong>Working Relationships:</strong></p><br><p><strong>Internal: </strong></p><br><ul> <li>Establish and maintain effective working relationships and communicate across the project / contract interfaces.</li> <li>Engage with inter-discipline community and promote discipline including: networking / knowledge sharing.</li> <li>Coordinates work efforts and solves technical problems with cooperative individuals </li> <li>Shares opinions, ideas and resources with others to achieve common goals, fosters teamwork and collaboration, builds trust </li></ul><p><strong>External: </strong></p><br><ul> <li>Establishing and / or maintaining an awareness of external stakeholders including: industry bodies, </li> <li>Academia, vendors, client interface (as appropriate and requested). </li> <li>Builds external relationships, with emphasis on those that facilitate the achievement of job accountabilities, such as relationships with key suppliers, customers and internal/external service providers or contractors</li></ul><p><strong>Level of Influence and Decision-Making Authority:</strong></p><br><ul> <li>Actions and decisions typically have a significant influence on the technical results of the project or department.</li> <li>Works independently on most aspects of work </li> <li>Works under general supervision: work is assigned in terms of specific objectives and guidelines and is checked for technical accuracy; broad instructions covering generally what needs to be done, limitations, quality and quantity expected, deadlines and priorities are given </li> <li>Additional, specific instructions are given for new, difficult or unusual assignments </li> <li>Unusual matters are refered to more senior authority </li> <li>No direct reports, but frequently serves as a technical resource. </li> <li>May guide and supervise a work group consisting of technical and support staff; looks to supervisor for substantial coaching on people management issues </li> <li>Responsible for meeting own targets which will impact the discipline</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable? </strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><p><strong>Expected:</strong></p><br><ul> <li>ISCED Level 6 Bachelors (minimum) or Level 7 Masters (preferred) Degree in Chemical Engineering or an equivalent relevant engineering discipline.</li></ul><p><strong>Knowledge, Skills and Experience</strong> </p><br><ul> <li>Typically requires more than five years of progressively responsible process engineering experience, preferably within the oil and gas energy. </li> <li>Demonstrates practical experience in process design, engineering studies, brownfield modifications, facility assessments, and support to existing operating facilities. </li> <li>Competent in preparing and reviewing process engineering deliverables, including BFDs, PFDs, P&IDs, heat and material balances, process datasheets, equipment sizing calculations, technical reports, and specifications. </li> <li>Able to perform process simulations, hydraulic calculations, facility capacity assessments, and process optimization activities. </li> <li>Experienced in site surveys, facility walkdowns, field data collection, as-built verification, and identification of discrepancies between site conditions and engineering documentation. </li> <li>Proficient in Aspen HYSYS and experienced in the use of PIPENET and Aspen Flare System Analyzer (FlareNet), as applicable to the assigned scope. </li> <li>Proficient in the use of relevant engineering calculation templates and Microsoft Office applications, particularly Excel, Word, and PowerPoint. </li> <li>Able to understand and interpret technical information, engineering drawings, specifications, datasheets, operating data, and vendor documentation. </li> <li>Working knowledge of applicable industry codes, standards, engineering procedures, HSEQ requirements, and project specifications. </li> <li>Experience in process safety activities, including participation in HAZID, HAZOP, LOPA, SIL, and Management of Change reviews, as applicable. </li> <li>Able to coordinate effectively with other engineering disciplines, operations personnel, clients, vendors, and contractors. </li> <li>Maintains awareness of relevant industry practices, technical developments, and emerging process engineering technologies.</li> <li>Good command of written and spoken English, with the ability to prepare clear technical reports and communicate effectively with multidisciplinary teams, clients, and vendors. </li></ul><p><strong>Personal attributes:</strong> </p><br><ul> <li>Able to communicate clearly verbally and in written form </li> <li>Good interpersonal and team working skills, builds positive relationships with supervisors, subordinates, peers and clients </li> <li>Enthusiastic, conscientious and committed to continuous professional development </li> <li>High level of awareness and commitment to safety in all aspects of daily work. </li> <li>Strong organizational skills and attention to detail. </li> <li>Highly motivated and demonstrates personal initiative. </li> <li>Possesses integrity, strong work ethic, positive attitude, and is dependable. </li> <li>Adaptable and flexible to the changing needs of projects and assignments. </li> <li>Prepared to take on new tasks and learn new technical subjects and skills. </li> <li>Continuously develops own knowledge and abilities.</li></ul> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
Position: Senior Workover Engineer<br> Location:Basra, Iraq<br> Rotation: 28/28<br> Duration: 12 months renewable<br> <br> We are seeking an experienced Senior Workover Engineer to join the Workover Engineering team on one of the world's largest producing onshore oil fields and the cornerstone of Iraq's oil production. Located in southern Iraq near Basra, this is a mature, large-scale asset with thousands of producing and injection wells, requiring continuous workover, stimulation, and production enhancement activities to sustain and maximize field performance.<br> The Senior Workover Engineer is a senior technical position responsible for providing engineering leadership and subject matter expertise in completion and workover fluids, stimulation, hydraulic fracturing, acidizing, cementing, and production enhancement operations.<br> The successful candidate will work closely with subsurface, operations, procurement, HSE, and service company personnel to develop and execute technically sound, safe, and cost-effective solutions that maximize well performance, improve reservoir productivity, and maintain long-term well integrity. The role also serves as the technical focal point for these disciplines within the Workover organization, supporting technology implementation, contractor management, engineering assurance, incident investigations, and the development of junior Iraqi engineering staff.<br>The Senior Workover Engineer is the focal point for completions, fluids, stimulation, hydraulic fracturing, and cementing engineering activities, ensuring safe, technically robust, and cost-effective execution of operations while supporting asset production, well integrity, and long-term field development objectives.<br> Key Responsibilities<br> • Provide technical leadership and engineering support for workover and completion operations.<br> • Design and optimize completion and workover fluid systems, including brines, filtration, fluid-loss control, displacement programs, and wellbore cleanup solutions.<br> • Develop and support acid stimulation programs for sandstone and carbonate reservoirs.<br> • Review and support the design and execution of hydraulic fracturing and acid fracturing treatments.<br> • Provide technical oversight of remedial cementing operations, including squeeze cementing, water shut-off treatments, tie-back liner cementing, cement plugs, and zonal isolation projects.<br> • Review and approve Workover engineering programs, risk assessments, and Management of Change (MOC) documentation.<br> • Prepare technical specifications, scopes of work, and tender packages for stimulation, fluid, and cementing services.<br> • Conduct technical evaluations of service providers and support contract award recommendations.<br> • Evaluate new technologies and work with service companies to identify opportunities for operational improvement and production enhancement.<br> • Investigate operational incidents and service quality issues, perform root cause analyses, and develop lessons learned.<br> • Develop engineering standards, procedures, and best practices within the discipline.<br> • Mentor and train junior Iraqi engineers and provide technical guidance across the organization.<br> <br> Qualifications<br> • Bachelor's Degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline.<br> • Minimum 10 years of relevant oil and gas industry experience.<br> • Demonstrated experience in:<br> o Brownfield rig workover operations<br> o Completion and workover fluids<br> o Brine systems, filtration, and fluid-loss control<br> o Sandstone and carbonate acid stimulation<br> o Hydraulic fracturing and acid fracturing<br> o Completion with artificial lift systems, preferably ESPs<br> o Remedial cementing and well integrity solutions<br> o Technical contract preparation and bid evaluation<br> • Strong understanding of well performance, production enhancement, and completion practices.<br> • Experience working with multidisciplinary teams in large onshore oilfield developments.<br> • Excellent technical, communication, problem-solving, and stakeholder management skills.<br> What We Offer<br> • Opportunity to work on one of the world's largest producing oil fields.<br> • Challenging and technically diverse engineering responsibilities.<br> • Exposure to advanced stimulation, completion, and well integrity technologies.<br> • Collaborative work environment with multidisciplinary teams and leading service providers.<br> • Structured rotational schedule (28/28) with accommodation, travel and logistics support provided while on assignment.<br> • International health insurance coverage.<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br><br>
</div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Planning Engineer<br><br><p>Ensures the development and completion of job progress milestones through scheduling. Coordinates with procurement and material mangers as well as engineering work group leads pertaining to essential. items of supply. Provides priorities for projects to guarantee completion. Contributes to forecasts and disbursements by performing schedule analysis. Under general supervision, and occasional direct supervision, performs assignments requiring experience and knowledge of standard concepts within project controls. Displays core competencies by analyzing possible solutions using standard procedures while developing advanced skills. Skills required for this job are typically acquired through the completion of an undergraduate degree and 2+ years of experience, or equivalent work experience in lieu of degree.</p><br><br><br><br><br> </div>
<ul> <li>To responsible for all types of job as a Project Engineer at a project site.</li> </ul><ul> <li>Plan, schedule, and manage projects to ensure timely and within-budget completion.</li> <li>Oversee engineering design, documentation, and procurement activities.</li> <li>Ensure adherence to health, safety, environmental standards, and regulatory requirements.</li> <li>Monitor construction activities and assist in commissioning and start-up processes.</li> <li>Manage project documentation and provide regular progress updates.</li> <li>Lead project teams, foster teamwork, and manage conflicts to achieve project goals effectively.</li> </ul><p><strong>Desired Candidate Profile</strong></p><ul> <li>Bachelor's degree in Electrical or Civil Engineering required.</li> <li>English fluency in spoken and written.</li> <li>Min seven (7) years of experience in oil & gas, petrochemical industry.</li> <li>Practical experience with project tools/software (ms office etc).</li> </ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span><u><b>Job Summary</b></u>
<br></span><p>The General Foreman is responsible to oversee daily site operations, coordinate with subcontractors and workers, and ensure projects are completed safely, efficiently, and according to specifications. They play a pivotal role in maintaining productivity, enforcing safety protocols, and fostering a collaborative work environment to achieve project goals. </p><br>
<br><br><u><b>Job Responsibilities 1</b></u>
<br><p>Maintain acceptable quality of works and to minimize reworks and effectively utilize available resources.</p><br>
<p>Monitor and control the latest valid drawings issued for use.</p><br>
<p>Coordinate at various levels to carry out activities as built for major elements of work.</p><br>
<p>Perform necessary corrective actions on work requiring rework or remedial actions as instructed and directed by the site engineer.</p><br>
<p>Ensure that works are achieved based on the approved Shop Drawings, method statement, and Behavior-Based Safety (BBS) and 100% completed on or before the scheduled date of accomplishment.</p><br>
<p>Complete site supervision of work, labor, materials, equipment-movement and proper distribution of such resource to ensure project costs and budgets are adhered to.</p><br>
<p>Ensure daily accomplish the site supervision of operational related activities and ensure that the cost of the activities will not exceed.</p><br>
<p>Maintains acceptable quality of works and to minimize reworks and effectively utilize available resources.</p><br>
<p>Ensure accomplishing assigned works on the time frame allotted maintaining the quality according to Company standards and reduce the reworks percentage to 0%.</p><br>
<p>Ensure compliance with the safety – Procedures and report if found any risk to the site Engineer to help project team to maintain zero Loss Time Incidents (LTIs).</p><br>
<p>Ensure that 100% of workers under the supervision are in compliance with the Company’s safety procedures during work hours on a daily basis.</p><br>
<p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u>
<br><br><b>Additional Responsibilities 3</b>
<br><br><u><b>Job Knowledge & Skills</b></u>
<br><p>Knowledge in Project construction scope and objectives.</p><br>
<p>Knowledge in project safety programs and objectives.</p><br>
<p>Knowledge in Company and project safety programs and objectives.</p><br>
<p>Knowledge in Occupational health and safety and environmental policies and procedures. </p><br>
<p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u>
<br><p>Minimum 5 year(s) working experience, 3 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u>
<br>Agility<br>AI Fluency<br>Quality_321977507<br>Leadership_321977503<br>Project Management L2_321977744<br>Cost Management L2<br>QA/QC L2<br>Design & Construction L2<br>HSE L2<br>Boldness<br><br><br><u><b>Education</b></u>
<br>High School Diploma in any Related Technical Certificates<br><br><br><br>
</div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Senior Civil and Structural Design Engineer -Onsite<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: Senior Civil and Structural Design Engineer</b><br><b>Company: </b>KBR-Iraq<br><b>Project: </b>Majnoon<br><b>Location</b>: Basra, Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Required: Expats/Iraqi Nationals</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>JOB TITLE: </b></p><br><br><p><b>KEY RESPONSIBILITIES:</b></p><br><br><ul><li>Develop Civil and Structural bill of materials</li><li>Prepare Layouts and detail drawings.</li><li>Create civil grading and roadway models using Civil 3D and prepare 2D drawing packages from the design models.</li><li>Collaborate with other disciplines and the project engineering team for structural design requirements.</li><li>3D modeling of RCC foundations, Piles, Pile caps,</li><li>Extraction of GA drawings. Development of RCC details, Base plate and Anchor bolts,</li><li>3D modeling, drawing extractions and Development of Structural Steel details, Piperacks, Technological Structures, Shelters, Grade Mounted platforms, Vessel mounted platforms, Pipe supports, Equipment foundations, Roads and Drains.</li><li>Perform calculations and layouts including 2D and 3D models with adequate dimensions necessary to assist the Engineering disciplines and Fabrication/Construction personnel including preparation of topographic layouts, earthworks/excavation drawings, boreholes locations, fencing, paved roads and drainage, underground piping and foundations, architectural and conceptual building drawings, control room layouts, substation layouts, machinery shelters, service platforms, pipe racks, pump foundations, vessel and vessel platform foundations, columns and other Civil/structural drawings.</li><li>Perform layout clash/interface checks, identify conflicts, take corrective action in coordination with other engineering discipline inputs.</li><li>Issue engineering drawings and layouts for Inter-Discipline Checks (IDC’s) coordinate with other engineering discipline in the integration of technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. Consult and make recommendations to Engineers on feasibility of design plans and layouts.</li><li>Estimation and preparation of material take off’s (MTO’s), review vendor drawings, ensure vendor specifications are in full compliance with contract/ project requirements.</li><li>Prepare Red-line markups, resolution of site queries from Construction and fabrication shop queries / TQs. Preparation of detail sketches to support resolution of site and fabrication queries. Updating of 3D model.</li><li>Prepare “As-Built” Drawings following completion of construction activities.</li></ul><br><p><b>ESSENTIAL QUALIFICATIONS AND SKILLS:</b></p><br><br><ul><li>+10 year’s experience.</li><li>Must – ACAD, Navisworks software</li><li>Supervising Small Teams.</li></ul><br><br><br><br> </div>
<ul><li>Fundamental of Process Engineering Knowledge such as Hydraulics, Heat Transfer, and Mass Transfer etc.</li><li>Knowledge of Process Chemistry, Trouble Shooting, Equipment Performance Evaluation, Analysis of Process Problems</li><li>Review of Project Documents such as FEED, PFD, P&ID and Process Design Package</li><li>Very Good Knowledge of Technical Writing</li><li>Computer Skill such as MS Office</li><li>Knowledge of Process Simulation Software such as Hysis, HTRI, Flare Net etc.</li><li>Fluent in English.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education: Minimum B.S. in Chemical Engineer.</p><p>Years of Experience: Minimum 8 years in Oil and Gas Industry</p><p>Nature of Experience: Process Engineering in Oil Refinery with special focus on Distillation and Catalytic Process Areas such as Hydrotreating, Semi Regenerative Reformer, Isomerization Process. and Sweetening Process such as Naphtha and Kerosene Merox.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Production Support Engineer<br><br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><p>Job Title: Production Support Engineer</p><br><br><p>Reports to: Programming TL</p><br><br><p>Work Schedule :28/28</p><br><br><p>Departments: PE Department</p><br><br><br><br><p><b>Job purpose</b></p><br><br><p>Production Support Engineer is part of the production planning section in the Petroleum Engineering Department. The primary purpose of the job is to ensure technical support to wells performance, close monitoring of daily production plans, well test plans, daily production allocation and be focal point between WRFM and operations departments.</p><br><br><br><p><b>Duties and responsibilities</b></p><br><br><ul><li>Production Well Testing - write well test procedures and instruction, execution, validation of data</li><li>Providing a smooth interface between Production Operations and other Petroleum Engineering e.g. leading and coordinating near real time optimization e.g. operating guideline, well testing and production trials etc.</li><li>Create short-term production plan and targets</li><li>Near real time to short-term production activities scheduling, surveillance and optimization of</li><li>integrated production systems with due consideration for WRFM, Asset integrity and HSSE</li><li>;">integrated production systems with due consideration for WRFM, Asset integrity and HSSE;">undefined</li><li>Ensuring daily production related data is entered into Energy Components, is accurate and ready for approval by Field Manager before Operations Morning Calls</li><li>Pro-active production surveillance (wells, facility, export)</li><li>Hydrocarbon accounting, production data management & reporting</li><li>Assist in determining daily production targets and achieving these daily</li><li>Establish new ways of working</li><li>Deferment management</li><li>Act as first line support for Operations for all issues related to Energy Components, production data and Integrated Production System performance</li><li>Supports startup of the hydrocarbon systems; achieve on target and on spec production.</li><li>Production reporting (Field Ops/Production Daily Reports), daily production allocation</li><li>Maintain up to date well bean up procedures and production priorities</li><li>Execute front line production surveillance</li><li>Field Technology champions for deploying of new Operations related technologies</li><li>Participating in WRFM activities</li></ul><p><b>Qualifications</b></p><br><br><ul><li>Degree in Petroleum Engineering.</li><li>Minimum 8 years' experience with an operator, be familiar with Programming teamwork flow, work scope and have background of production engineering.</li><li>Should have up to date experience in the well production plan, well testing plan, HC allocation and well optimization.</li><li>Good knowledge of production allocation using EC software.</li><li>Knowledge of well completion, intervention and rig less activities and regulations.</li><li>Knowledge of PE standard software: OEM, PI, PVTSim, Kappa's Sapphire and other standard software: Eclipse, Petrel RE, etc.</li><li>Communication Skill with team members from different culture and with Clients.</li></ul><p><b>Experience</b></p><br><br><p>1. Minimum 10-15 years' experience with an operator with in-depth technical knowledge and capability in petroleum engineering, daily well management, and team management</p><br><br><p>2. Strong technical background in reservoir engineering, or related discipline</p><br><br><p>3. Be familiar with reservoir management including production maintenance and well management.</p><br><br><p>4. Experienced in working in a multi-cultural and multi-nationalities team</p><br><br><br><br><br><p><b>Language proficiency, computer and software skills</b></p><br><br><ul><li>Must be able to speak upper intermediate and above English. Arabic is an advantage.</li><li>Experience and Knowledge of advanced level PI (Process book), Energy Components. Knowledge of Prosper, GAP will be an advantage.</li></ul><br><p><b>Skills</b></p><br><br><ul><li>Good communication and analytical skills are essential.</li><li>Eagerness to learn and develop own skills</li><li>Strong leadership skills, ability to delegate, and work with minimum supervision</li><li>Must have a HSSE driven mindset</li><li>Self-starter and proactive 'go getter'</li><li>Be sufficiently flexible to work outside the normal boundaries and to integrate quickly into the Majnoon project.</li><li>The ability to work with people from different cultural backgrounds will be essential. The position will involve working with government or partner representatives.</li><li>Ability to quickly determine the optimal production solution, with often conflicting or missing data or information.</li><li>Good diagnostic skills are required to troubleshoot problems.</li><li>Must be able to communicate at a technical level with various stakeholders</li><li>Production Technologists: well inflow performance and well integrity</li><li>Reservoir Engineers: production forecasts</li><li>Finance/Commercial department: reporting and forecasting of produced and export volumes</li><li>Operations, HSE & Maintenance: system performance, environmental-related reporting and optimization opportunities</li><li>Metering: metering and mis-measurement issues</li></ul><br><br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for a Senior Project Engineer to join its Iraq business unit focusing on leading the development and delivery of Front-End Engineering Design (FEED) packages for infrastructure facilities</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br> Reports to: Project Manager </p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Senior Project Engineer to join its Iraq business unit focusing on leading the development and delivery of Front-End Engineering Design (FEED) packages for infrastructure facilities</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br> Reports to: Project Manager </p><br><p><i><strong>#Wood #Iraq #Basra #Senior Project Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Senior Project Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects </strong></p><br><p><strong>Designing the future. Transforming the world. </strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. </p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer:</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p>Lead the development and delivery of Front-End Engineering Design (FEED) packages for infrastructure facilities associated with major projects, including logistics bases, fuel storage facilities, roads, utilities, and supporting infrastructure.</p><br><p>The role is responsible for coordinating multidisciplinary engineering activities, ensuring technical excellence, schedule compliance, and successful integration of all engineering disciplines throughout the FEED phase. The position will take overall ownership of infrastructure FEED development and will be supported by discipline engineers.</p><br><p><strong>Key Responsibilities:</strong></p><br><p><strong>FEED Development & Technical Leadership</strong></p><br><ul> <li>Lead the preparation and execution of FEED studies for infrastructure facilities, including: <ul> <li>Logistics bases</li> <li>Fuel storage and distribution systems</li> <li>Roads and transportation networks</li> <li>Utilities and support facilities</li> <li>Site development and associated infrastructure</li> </ul></li> <li>Develop Basis of Design, design philosophies, project specifications, and engineering deliverables.</li> <li>Coordinate multidisciplinary engineering inputs to ensure alignment of design objectives and project requirements.</li> <li>Manage interfaces between civil, structural, mechanical, piping, electrical, instrumentation, and other engineering disciplines.</li> <li>Ensure engineering solutions are technically sound, practical, cost-effective, and compliant with applicable standards and project requirements.</li> <li>Review, coordinate, and approve engineering deliverables generated by discipline engineers.</li></ul><p><strong>Project Engineering & Coordination</strong></p><br><ul> <li>Act as the focal point for all infrastructure FEED activities.</li> <li>Coordinate engineering activities across multiple disciplines and execution centers where applicable.</li> <li>Develop and manage engineering schedules, monitor progress, and drive timely delivery of FEED deliverables.</li> <li>Identify technical risks, constraints, and opportunities and develop mitigation plans.</li> <li>Support project execution planning and contribute to engineering strategies for project development.</li></ul><p><strong>Stakeholder Management</strong></p><br><ul> <li>Serve as the primary engineering interface with external stakeholders and contractors for infrastructure-related FEED activities.</li> <li>Lead technical meetings, workshops, design reviews, and coordination sessions.</li> <li>Present engineering solutions and recommendations to project management and clients.</li> <li>Manage technical queries and ensure timely resolution of issues.</li></ul><p><strong>Quality, HSE & Assurance</strong></p><br><ul> <li>Ensure all FEED activities comply with company procedures, industry standards, and project specifications.</li> <li>Integrate Health, Safety, Environment, and Security (HSES) requirements into engineering designs.</li> <li>Support design assurance and quality reviews of all infrastructure deliverables.</li> <li>Ensure deliverables are issued accurately and within agreed schedules.</li></ul><p><strong>Change & Risk Management</strong></p><br><ul> <li>Identify scope changes and assess their impact on cost, schedule, and technical requirements.</li> <li>Support implementation of approved changes through established management of change processes.</li> <li>Monitor engineering risks and ensure mitigation measures are incorporated into project planning.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable? </strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><p><strong>Expected:</strong></p><br><ul> <li>Bachelor's Degree in Engineering (Civil, Mechanical, Infrastructure, or related discipline).</li> <li>PMP or Project Management qualification is an advantage.</li></ul><p><strong>Experience</strong></p><br><ul> <li>Minimum 10 years of engineering experience in oil & gas, energy, industrial, or infrastructure projects.</li> <li>Demonstrated experience leading FEED studies for infrastructure facilities.</li> <li>Experience with logistics bases, fuel storage facilities, road networks, utilities, and site infrastructure.</li> <li>Proven track record coordinating multidisciplinary engineering teams.</li> <li>Experience interfacing directly with clients and stakeholders during FEED and project development phases.</li></ul><p><strong>Skills & Competencies</strong></p><br><ul> <li>Strong project engineering and FEED management capabilities.</li> <li>Excellent multidisciplinary coordination skills.</li> <li>Thorough understanding of engineering standards, specifications, and design practices.</li> <li>Strong planning, scheduling, and organizational skills.</li> <li>Effective stakeholder and client management abilities.</li> <li>Commercial awareness and understanding of change management processes.</li> <li>Strong leadership, communication, and problem-solving skills.</li> <li>Ability to work independently and drive project objectives to completion.</li></ul> </div>
<p>Implementation engineers is responsible for implementing ERP system for businesses. He/She works with a variety of clients, from small businesses to large corporations, to help them integrate new software or hardware into their existing infrastructure. Implementation engineer may also be tasked with training users on how to use the new technology they ve implemented. This can include anything from simple tutorials on how to log in to more complex training sessions on how to use specific features of the software or hardware being introduced.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor Degree or Higher in IT or Business related fields</li><li>Passion for software products</li><li>Perfect written English</li><li>Highly creative and autonomous</li><li>Problem solver</li><li>Excellent with MS apps</li><li>Good communication skills</li><li>Basics linux commands</li><li>Basic knowledge in ERP systems</li><li>Analytical skills</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Senior Project Engineer (Power)<br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><br><br><p><b>Job Title: Project Engineer - Power (Local Talent)</b></p><br><br><p><b>28/28 Basra.</b></p><br><br><br><p><b>Job Purpose: </b></p><br><br><p>To support project team in executing EPC and Call off Contractors works to manage, supervise, and execute site activities related to Overhead Transmission Line (OHTL) construction, and delivery of projects by coordinating technical activities, managing contractor and consultant interfaces and ensuring compliance with project requirements, Client standards, safety standards, quality requirements, applicable regulations and schedule targets. The role is primarily site-based in Iraq, with regular coordination with multi-disciplinary teams.</p><br><br><br><p><b>Key Responsibilities: </b></p><br><br><ul><li>Site Execution & Supervision: Oversee construction activities for OHTL, ensure work is carried out as per approved drawings, method statements, and specifications and monitor contractor performance and productivity.</li></ul><ul><li>Project planning & Execution: Plan and execute OHTL Projects (typically 33kV to 132kV or higher voltages) by coordinating with engineering, procurement, and construction teams. Monitor project milestones and deliverables.</li></ul><ul><li>Review construction schedules and ensure adherence to timelines, identify site constraints and propose mitigation measures and liaise with local authorities and stakeholders when required. Prepare and present regular progress reports to senior management and clients.</li></ul><ul><li>Quality Control: Ensure compliance with project specifications, standards (IEC/IEEE), and client requirements. Conduct inspections, audits, and ensure proper documentation of quality records.</li></ul><ul><li>Commercial & Contract Support: Assist in quantity verification and BOQ tracking, support in variation claims and change orders and review subcontractor invoices and progress billing.</li></ul><ul><li>Testing & Commissioning: Support pre-commissioning and commissioning activities, Coordinate energization readiness with client and grid authorities, Close out punch points and handover documentation.</li></ul><br><p><b>Qualifications:</b></p><br><br><ul><li>Bachelor’s degree in electrical engineering.</li><li>10 years of experience in high voltage (HV/EHV) transmission line projects related to oil and gas industry.</li><li>Experience in Middle East (preferably Iraq) is an advantage</li></ul><br><p><b>Key Skills:</b></p><br><br><ul><li>Experience in Majnoon Oil Field, Basra, Iraq is an advantage</li><li>Strong Knowledge of Overhead Transmission Line (OHTL) construction.</li><li>Experience in Contract management with Commercial awareness</li><li>Strong communication and coordination skills</li><li>Mandatory experience in Oil and Gas industry.</li><li>Strong problem-solving and decision-making skills under site conditions.</li><li>Ability to manage multiple stakeholders in a multicultural environment.</li><li>Proficiency in project management tools (e.g., Primavera P6, MS Project) is an advantage</li><li>Fluent in both English and Arabic language (written and spoken).</li><li>Good knowledge of International Standards (IEC/IEEE)</li></ul><br><br><br> </div>
<p> <strong>Urgent Hiring</strong> </p> <br> <p> <strong>HVAC Maintenance Engineer - Power Plant | Baghdad, Iraq | </strong> </p> <br> <p> <strong>Requirements:</strong> </p> <ul> <li>Education: Bachelor's in Mechanical Engineering (Mandatory)</li> <li>Experience: Minimum 5 years of direct, hands-on experience in HVAC Maintenance</li> <li>Skills: Hands-on experience with CMMS</li> <li>Fluent English is mandatory - daily coordination with foreign engineers required</li> <li>Must be able to lead a team of 4 Technicians + 6 Filter Cleaning Workers</li> </ul> <br> <p> <strong>Package & Benefits:</strong> </p> <ul> <li> <strong>Salary: 1000 - 1300 USD (Based on experience)</strong> </li> <li>Location: Baghdad, Iraq (Power Plant Site)</li> <li>Work Schedule: 6 Days / Week, 7:00 AM - 4:00 PM</li> <li>Benefits: Accommodation inside the plant + 3 meals per day provided</li> </ul> <br><p><strong>Desired Candidate Profile</strong></p><ul> <li>Education: Bachelor's in Mechanical Engineering (Mandatory)</li> <li>Experience: Minimum 5 years of direct, hands-on experience in HVAC Maintenance</li> <li>Skills: Hands-on experience with CMMS</li> <li>Fluent English is mandatory - daily coordination with foreign engineers required</li> <li>Must be able to lead a team of 4 Technicians + 6 Filter Cleaning Workers</li> </ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Junior Mechanical Engineer -Onsite<br><br><span><b>Job Description</b></span><p><b>Job Title: </b>Junior Mechanical Engineer<br><b>Company: </b>KBR<b> <br>Location</b>: Basra Iraq<b><br>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: TBC</p><br><br><p>Required Nationals Iraqi</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><span><b>Job Purpose</b></span></p><br><br><p>Support the mechanical maintenance, installation and integrity activities for static and rotating equipment at Majnoon Oil Field. Working under the direction of senior mechanical engineers, the role helps make sure equipment is installed, aligned and maintained safely, to specification and in line with KBR and client procedures.</p><br><br><p><span><b>Job Responsibilities</b></span></p><br><br><ul><li>Assist with the installation, positioning, levelling and alignment of mechanical equipment such as pumps, compressors, pressure vessels and pipe skids.</li></ul><ul><li>Support piping and flange connection work, including bolt tightening and torque checks, in line with approved procedures.</li></ul><ul><li>Read and interpret P&IDs, isometric drawings, general arrangement drawings and vendor documents to support field work.</li></ul><ul><li>Take part in preventive and corrective maintenance tasks and record work completed in the maintenance management system.</li></ul><ul><li>Support the planning of lifting operations and check that lifting equipment and rigging are inspected and certified before use.</li></ul><ul><li>Carry out field inspections and help prepare punch lists, inspection records and daily progress reports.</li></ul><ul><li>Work within the Permit to Work system and follow all HSE rules, risk assessments and toolbox talk requirements.</li></ul><ul><li>Coordinate with operations, construction and quality teams to resolve day-to-day mechanical issues.</li></ul><ul><li>Raise material and spare part requests and track their status with the materials team.</li></ul><ul><li>Take part in training and on-the-job development to build technical competence.</li></ul><p><span><b>Technical Qualification & Skills</b></span></p><br><br><ul><li>Bachelor's degree in Mechanical Engineering from a recognised university.</li></ul><ul><li>0 to 2 years of experience in oil and gas, petrochemical or heavy industrial projects (fresh graduates with relevant internship or project experience will be considered).</li></ul><ul><li>Working knowledge of P&IDs, isometric drawings and mechanical equipment basics (static and rotating).</li></ul><ul><li>Basic understanding of piping, flange management and bolt torquing practices.</li></ul><ul><li>Awareness of lifting and rigging safety; a lifting supervisor or rigging certificate is an advantage.</li></ul><ul><li>Recognised HSE training (for example OSHA, IOSH or NEBOSH) is an advantage.</li></ul><ul><li>Computer skills in MS Office; AutoCAD or Navisworks is an advantage.</li></ul><ul><li>Good spoken and written English; fluent Arabic.</li></ul><p><span><b>Soft skills</b></span></p><br><br><ul><li>Safety-minded and disciplined in following procedures.</li></ul><ul><li>Willing to learn and take direction from senior engineers.</li></ul><ul><li>Clear communicator who works well in multidisciplinary field teams.</li></ul><ul><li>Practical problem solver with attention to detail.</li></ul><ul><li>Able to work in a remote field environment on a rotational schedule.</li></ul><br><br><br> </div>
<p>Our client is seeking an experienced Senior Welding Engineer to act as the welding Subject Matter Expert across a high-profile project. This is a key role within our client's team, ensuring welding integrity for pipelines, flowlines, piping and structures, and liaising closely with contractors and specialists to safeguard project quality and safety.</p> <p> <strong> </strong> <strong>Key Responsibilities: </strong> </p> <ul> <li>Act as the Company Welding Subject Matter Expert (SME) for all welding-related activities within the NWP package.</li> <li>Manage the review and approval process of critical welding deliverables including Welding Execution Plans, WPS, WPQR/PQR, repair procedures and welding consumable specifications.</li> <li>Witness and validate Welding Procedure Qualification Tests (WPQT), welding trials and associated mechanical testing programs.</li> <li>Provide technical support and expertise for complex welding issues including dissimilar materials, production repairs, automatic welding, tie-ins and fitness-for-service assessments.</li> <li>Manage the Interface with Company specialists, EPC Contractor and Vendors to ensure consistency of welding practices and compliance with Project integrity requirements.</li> <li>Participate in technical evaluations, audits and contractor performance assessments as Company welding authority.</li> <li>Ensure that all welding activities related to pipelines, flowlines, piping and structures are performed in compliance with Project Specifications, approved procedures, applicable codes and Company requirements.</li> <li>Review and validate WPS, PQR and welders' qualifications and ensure proper implementation during construction activities.</li> <li>Monitor and assess welding execution on site, including fit-up, welding parameters, consumables, heat input and workmanship.</li> <li>Coordinate closely with Construction, QC, NDE and Contractor teams to ensure welding activities are executed safely and in line with approved ITPs.</li> <li>Support qualification, audit, testing and inspection activities at fabrication yards and construction sites.</li> <li>Review and support resolution of welding-related Technical Queries, Deviation Requests and Non-Conformance Reports.</li> <li>Assess contractor welding performance, identify trends, productivity or quality issues, and propose corrective or improvement actions.</li> <li>Ensure proper welding documentation, traceability and records are maintained for inclusion in the Project Quality Dossier.</li> <li>Ensure strict compliance with H3SE requirements during all welding activities and promote safe working practices on site.</li> <li>Provide regular reporting to the NWP Quality Superintendent on welding performance, issues and risks.</li> </ul><p><strong>Desired Candidate Profile</strong></p><ul><li>20+ years of Oil & Gas experience, including 15+ years in welding engineering, fabrication, and construction.</li> <li>Proven EPC and international project experience covering pipelines, flowlines, pressure piping, and structural fabrication.</li> <li>Strong expertise in automatic/mechanized welding (GTAW/GMAW), welding metallurgy, fracture mechanics, consumables, heat input control, and repair methods.</li> <li>Experienced in Engineering Critical Assessment (ECA), welding qualifications, defect acceptance, and qualification programs.</li> <li>Demonstrated experience in sweet and sour service fabrication and construction activities.</li> <li>Ability to act as a technical authority, coordinating with contractors, certification bodies, and company specialists.</li> <li>Solid knowledge of API 1104, ASME, DNV, and Company GS standards (PLR/PVV).</li> <li>Hands-on experience with welding procedures, qualifications, field supervision, and construction execution.</li> <li>International Welding Engineer (IWE) certification mandatory.</li> <li>Fluent in English; Chinese or Arabic is an advantage.</li> <li>Strong leadership, technical judgment, analytical skills, and communication abilities.</li> </ul>
<p>A leading farm in Iraq is seeking a skilled Electrical Engineer Solar Systems to support the installation, operation, and maintenance of solar power systems. The ideal candidate will ensure the efficient performance of photovoltaic (PV) systems while contributing to the farm's sustainable energy initiatives. <br> <br></p><h4>Key Responsibilities </h4><ul><li>Supervise the installation, testing, and commissioning of solar PV systems. </li><li>Monitor and maintain solar power systems to ensure optimal performance. </li><li>Diagnose and resolve electrical and system faults. </li><li>Perform preventive and corrective maintenance on solar equipment. </li><li>Coordinate with contractors and technical teams during project execution. </li><li>Prepare technical reports and maintenance records. </li><li>Ensure compliance with electrical safety standards and project specifications. </li></ul><p><strong>Desired Candidate Profile</strong></p><h4>Requirements </h4><ul><li>Bachelor's degree in Electrical Engineering. </li><li>Previous experience with <strong>solar PV systems</strong> is required. </li><li>Knowledge of electrical systems, inverters, transformers, and solar equipment. </li><li>Strong troubleshooting and problem-solving skills. </li><li>Ability to read electrical drawings and technical documents. </li><li>Willingness to work on-site in Iraq.</li></ul>
<ul><li><p>Work Experience: <strong>5 - 10 years </strong>of experience in industrial instrumentation, automation, and process control.</p></li></ul><ul><li><p>Technical Knowledge: Practical and technical proficiency in SIS/ESD, DCS, PLC systems, and instrumentation.</p></li></ul><ul><li><p>Industry Experience: Experience working with recognised industrial automation brands, particularly Emerson DeltaV and Yokogawa CENTUM.</p></li></ul><ul><li><p>Control Equipment: Appropriate technical knowledge of control valves, actuators, positioners, and precision instrumentation equipment.</p></li></ul><ul><li><p>Project Work: Willingness and ability to perform activities both at project sites (on-site) and away from project sites (off-site), including visiting clients and project locations when required.</p></li></ul><ul><li><p>English Language: Ability to communicate technically and professionally in English.</p></li></ul><ul><li><p>Educational Qualification: A bachelor's degree in Automation Engineering, Instrumentation, Electrical Engineering, or a closely related field is required.</p></li></ul><ul><li><p>Interested candidates are requested to submit their CV in English </p></li></ul><p><strong>Desired Candidate Profile</strong></p><p> Instrumentation and Automation Engineer having 5 to 10 years of relevant work experience in industrial automation and instrumentation to work with its oil and gas, petrochemical, power plant, or energy-related operations.</p>
<p>We are looking for a Senior Welding Engineer for one of our clients with the following details:
Location: Basrah, Iraq
Start Date: Nov 2026
Contract Duration: 12 months, renewable
Work Scheme: Rotational 28 days ON and 28 days OFF</p><br><p><u>Missions & Activities</u></p><ul><li><p>Act as the Company Welding Subject Matter Expert (SME) for all welding-related activities within the NWP package.</p></li><li><p>Manage the review and approval process of critical welding deliverables including Welding Execution Plans, WPS, WPQR/PQR, repair procedures and welding consumable specifications.</p></li><li><p>Witness and validate Welding Procedure Qualification Tests (WPQT), welding trials and associated mechanical testing programs.</p></li><li><p>Provide technical support and expertise for complex welding issues including dissimilar materials, production repairs, automatic welding, tie-ins and fitness-for-service assessments.</p></li><li><p>Manage the Interface with COMPANY specialists, EPC Contractor and Vendors to ensure consistency of welding practices and compliance with Project integrity requirements.</p></li><li><p>Participate in technical evaluations, audits and contractor performance assessments as Company welding authority.</p></li><li><p>Ensure that all welding activities related to pipelines, flowlines, piping and structures are performed in compliance with Project Specifications, approved procedures, applicable codes and COMPANY requirements.</p></li><li><p>Review and validate WPS, PQR and welders’ qualifications and ensure proper implementation during construction activities.</p></li><li><p>Monitor and assess welding execution on site, including fit-up, welding parameters, consumables, heat input and workmanship.</p></li><li><p>Coordinate closely with Construction, QC, NDE and Contractor teams to ensure welding activities are executed safely and in line with approved ITPs.</p></li><li><p>Support qualification, audit, testing and inspection activities at fabrication yards and construction sites.</p></li><li><p>Review and support resolution of welding-related Technical Queries, Deviation Requests and Non-Conformance Reports.</p></li><li><p>Assess contractor welding performance, identify trends, productivity or quality issues, and propose corrective or improvement actions.</p></li><li><p>Ensure proper welding documentation, traceability and records are maintained for inclusion in the Project Quality Dossier.</p></li><li><p>Ensure strict compliance with H3SE requirements during all welding activities and promote safe working practices on site.</p></li><li><p>Provide regular reporting to the NWP Quality Superintendent on welding performance, issues and risks.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><u>Qualification and Experience Required:</u></p><ul><li><p>Professional Experience (years): Minimum 20 years of experience in Oil & Gas projects</p></li><li><p>Experience in similar position (years): At least 15 years dedicated to welding engineering, fabrication and construction activities.</p></li><li><p>Extensive experience with major EPC and international projects involving pipelines, flowlines, pressure piping and structural fabrication.</p></li><li><p>Extensive experience in automatic pipeline welding processes, mechanized GTAW/GMAW systems and associated qualification programs.</p></li><li><p>Strong expertise in welding metallurgy, fracture mechanics, welding consumables, heat input management and repair methodologies.</p></li><li><p>Experienced in Engineering Critical Assessment (ECA) studies and their application to welding qualification and defect acceptance.</p></li><li><p>Proven experience in fabrication, welding qualification and construction activities for both sweet and sour service environments.</p></li><li><p>Demonstrated capability to act as technical authority and lead interfaces with Contractors, Certification Bodies and Company technical specialists.</p></li><li><p>Strong knowledge of pipeline welding codes and standards (API 1104, ASME, DNV), and COMPANY GS (PLR, PVV)</p></li><li><p>Experience with welding qualifications, procedures and field supervision.</p></li><li><p>Good understanding of construction execution and field constraints.</p></li><li><p>Level / Diploma: International Welding Engineer (IWE) certification mandatory.</p></li><li><p>Languages: Fluency in English (speaking and writing); Chinese/Arabic would be a plus</p></li></ul>
<p><h4>About company</h4>
<p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p>
<h4>Job purpose</h4>
<p>The site planning engineer is responsible for developing and managing site planning activities to ensure that the project is completed on time and within budget. This role involves coordinating with multidisciplinary teams during the FEED and design phases, focusing on onshore and brownfield projects. The site planning engineer will play a crucial role in implementing effective planning strategies, ensuring resource optimization, and mitigating risks associated with site operations.</p>
<h4>Job responsibilities</h4>
<li>Develop and maintain detailed project schedules using suitable project management software.</li>
<li>Collaborate with engineering, construction, and procurement teams to assess project requirements and ensure alignment with project scope.</li>
<li>Perform risk analysis and assessment to identify potential issues in project execution and propose corrective actions.</li>
<li>Monitor project progress and report regularly to senior management and project stakeholders.</li>
<li>Facilitate site assessments and prepare relevant reports to support decision-making processes.</li>
<li>Ensure compliance with safety regulations and promote a culture of safety on-site.</li>
<li>Maintain effective communication with all project stakeholders and foster strong working relationships.</li>
<li>Participate in project meetings, providing insights on planning and scheduling aspects.</li>
<li>Contribute to continuous improvement efforts by proposing innovative planning solutions and methodologies.</li>
<li>Assist in the development of progress reports and other documentation as required by project management.</li>
<h4>Functional responsibilities</h4>
<li>Implementing site logistics and resource plans, considering workforce and construction equipment requirements.</li>
<li>Coordinating with the engineering team to integrate design changes into the project schedule effectively.</li>
<li>Evaluating and monitoring subcontractor performance in relation to planning and execution benchmarks.</li>
<li>Preparing and analyzing variance reports to identify schedule delays or inefficiencies.</li>
<h4>Technical skills</h4>
<li>Proficient in project scheduling software (e.g., Primavera P6, MS Project).</li>
<li>Strong understanding of project management principles, methodologies, and tools.</li>
<li>Familiarity with FEED (Front-End Engineering Design) processes and brownfield project challenges.</li>
<li>Ability to read and interpret engineering drawings and specifications.</li>
<li>Competent in risk management and mitigation strategies.</li>
<h4>Soft skills</h4>
<li>Excellent communication and interpersonal skills to work collaboratively with diverse teams.</li>
<li>Strong analytical and problem-solving abilities.</li>
<li>Proactive attitude and ability to work under tight deadlines and pressure.</li>
<li>Strong organizational skills and attention to detail.</li>
<h4>Qualification</h4>
<p>Must have 10 years of experience in site planning and project controls.</p>
<p><strong>Mandatory:</strong></p>
<li>Bachelor’s degree in engineering in related field from reputed university.</li>
<p><strong>Good to have:</strong></p>
<li>Master’s degree in engineering in related field from reputed university.</li>
<h4>Work environment</h4>
<li>The role will primarily be based on-site in Iraq, requiring a commitment to a dynamic and fast-paced work environment. The position may involve working in varying weather conditions and adhering to local health and safety regulations.</li>
<li>Flexibility in working hours may be required to accommodate project demands and deadlines.</li></p><p></p>
<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies & procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training & development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil & gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil & gas industry.</p>
Receive email alerts for Electronics Engineer Jobs in Iraq jobs
You can cancel your email alert at anytime