Factory Jobs
1438 Jobs Found
Save and set alert for similar positionsManage alerts
<p>Perform rigging, lifting, and hoisting activities in accordance with approved lifting plans and safety procedures. Inspect and select appropriate lifting gear, including slings, shackles, hooks, wire ropes, and other rigging equipment. Ensure all lifting equipment is in safe working condition before use. Attach, secure, balance, and guide loads during lifting operations. Communicate effectively with crane operators using standard hand signals and radio communication. Establish and maintain safe lifting zones to protect personnel and equipment. Monitor lifting operations and immediately report unsafe conditions or equipment defects. Assist in the assembly, dismantling, and positioning of lifting equipment when required. Coordinate with supervisors, crane operators, and other team members to ensure safe and efficient lifting operations. Maintain proper housekeeping and ensure work areas remain clean and hazard-free. Comply with all company policies, client requirements, and site safety regulations. Support the successful completion of project activities while maintaining the highest standards of safety and quality.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 3 years of experience as a Rigger in construction, infrastructure, oil & gas, or industrial projects. Good knowledge of lifting operations, rigging techniques, and load handling procedures. Ability to inspect and identify suitable lifting gear and rigging equipment. Familiarity with lifting plans, load charts, and safe lifting practices. Basic English communication skills. Physically fit and capable of working in demanding site conditions. Valid rigging certification (if applicable as per project/client requirements). Knowledge of site safety regulations, permit-to-work systems, and hazard identification.</p>
<p> <b> <br>Job Description</b> </p> <p>The HVAC/R Supervisor will be based at one of three Amentum sites in Iraq and support the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The HVAC/R Supervisor is responsible for oversight of all site HVAC/R operations, to include maintenance, repair, and installation of environmental control systems. This role requires practical knowledge of refrigeration theory, pipefitting, system layout, and troubleshooting.</p> <br> <p>This position is responsible for the overall operation and maintenance of HVAC/R equipment and systems and reports directly to the O&M Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p> <br> <p> <b>DUTIES:</b> </p> <ul> <li>Responsible for maintaining a safe workplace and ensuring safety remains the highest priority</li> <li>Comply with all Environmental Health & Safety (EHS) and Quality Assurance requirements</li> <li>Provide necessary information and documentation to ensure compliance with applicable standards</li> <li>Operate, maintain, and repair site HVAC/R systems including, but not limited to: air-cooled chillers, direct expansion units, air handling units, filters (including chemical biological filters where applicable), ductwork, dampers, actuators, fans, chilled water lines, heating and cooling systems, fan coil units, electric reheats, diffusers, vents, VAV boxes, exhaust systems, control valves, cooling coils, and ventilation systems supporting facilities such as laundry rooms, kitchens, and restrooms</li> <li>Schedule personnel, including shifts and rotations, to maintain required service levels</li> <li>Assign tasks and enforce standards of conduct and performance</li> <li>Inspect and audit work in progress and completed work to ensure compliance with codes, quality standards, and customer expectations</li> <li>Manage tools, equipment, and inventory to maintain accountability and support operational needs</li> <li>Complete required reports, both quantitative and qualitative</li> <li>Provide input on policies, procedures, and administrative requirements</li> <li>Install and mount compressors, condenser units, and air handling equipment in accordance with engineering specifications and manufacturer recommendations</li> <li>Maintain custodianship of assigned work areas, tools, equipment, and spare parts</li> <li>Perform additional duties and special projects as assigned</li> </ul> <br> <p> <b>REQUIRED:</b> </p> <p> <b>Minimum Acceptable Experience Level:</b> </p> <ul> <li>Ten (10) years of HVAC/R experience, including at least two (4) years in a supervisory or lead role; <b>or</b> </li> <li>Equivalent combination of technical training, certifications, and hands-on HVAC/R experience</li> </ul> <p>Experience may be demonstrated through field work, vocational training, apprenticeship programs, or industry-recognized certifications.</p> <br> <p> <b>Knowledge, Skills, and Abilities:</b> </p> <ul> <li>Knowledge of applicable U.S. codes and International Mechanical Code (IMC) standards</li> <li>Strong understanding of HVAC/R systems, operations, and repairs</li> <li>Familiarity with supporting contract operations in an overseas environment</li> <li>Ability to work in a fast-paced environment while managing multiple priorities</li> <li>Cross-cultural awareness and ability to work within a diverse workforce</li> <li>Strong organizational and time management skills</li> <li>Proficiency in Microsoft Word and Excel</li> <li>Ability to work effectively as part of a team</li> <li>Strong communication skills, both verbal and written</li> </ul> <ul> <li> <b>Education:</b> </li> </ul> <ul> <li>High school diploma or GED required</li> <li>HVAC vocational training, apprenticeship completion, or equivalent experience</li> </ul> <ul> <li> <b>Passport, Licenses and Certifications:</b> As part of pre-contingency requirements, <b>by the time the visa process starts</b>, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li> </ul> <ul> <li>Valid drivers license from Home of Record </li> <li>EPA Section 608 Certification required</li> <li>HVAC licensing or certification is preferred; however, candidates without a formal license may qualify based on experience and demonstrated technical expertise</li> <li>Candidates must be able to obtain any required certifications or credentials within 180 days of employment, if applicable</li> </ul> <ul> <li> <b>Security Vetting:</b> Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li> <li> <b>Language Skills:</b> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li> <li> <b>Medical: </b>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li> </ul> <br> <p> <b>DESIRED:</b> </p> <ul> <li>Previous overseas experience</li> <li>Experience working in austere or harsh environments</li> <li>Prior experience with Amentum or similar contracts</li> </ul> <p> <br> <br> </p> <p> <b>OTHER RESPONSIBILITIES: </b> </p> <p> <b>Safety - </b>Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p><p><strong>Desired Candidate Profile</strong></p><ul> <li>Ten (10) years of HVAC/R experience, including at least two (4) years in a supervisory or lead role; <b>or</b> </li> <li>Equivalent combination of technical training, certifications, and hands-on HVAC/R experience</li> </ul> <p>Experience may be demonstrated through field work, vocational training, apprenticeship programs, or industry-recognized certifications.</p> <ul> <li>Knowledge of applicable U.S. codes and International Mechanical Code (IMC) standards</li> <li>Strong understanding of HVAC/R systems, operations, and repairs</li> <li>Familiarity with supporting contract operations in an overseas environment</li> <li>Ability to work in a fast-paced environment while managing multiple priorities</li> <li>Cross-cultural awareness and ability to work within a diverse workforce</li> <li>Strong organizational and time management skills</li> <li>Proficiency in Microsoft Word and Excel</li> <li>Ability to work effectively as part of a team</li> <li>Strong communication skills, both verbal and written</li> </ul> <ul> <li>High school diploma or GED required</li> <li>HVAC vocational training, apprenticeship completion, or equivalent experience</li> </ul> <ul> <li>As part of pre-contingency requirements, <b>by the time the visa process starts</b>, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li> </ul> <ul> <li>Valid drivers license from Home of Record </li> <li>EPA Section 608 Certification required</li> <li>HVAC licensing or certification is preferred; however, candidates without a formal license may qualify based on experience and demonstrated technical expertise</li> <li>Candidates must be able to obtain any required certifications or credentials within 180 days of employment, if applicable</li> </ul> <ul> <li>Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li> <li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li> <li>Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li> </ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Job description</p><p><b>The work usually takes around 2 days, and the payment is 200 USD.</b></p><p><br></p><p># Job Summary</p><p><br></p><p>- To visit cigarette selling retail and wholesale stores and collect basic market info,</p><p><br></p><p>namely the selling price data of cigarette brands and photos of the tobacco display shelf.</p><p><br></p><p>- To monitor market issues by interviewing store owners/workers and checking local news/media of cigarette industry</p><p><br></p><p>*KT&G will share the report format(Google Sheets, Microsoft Excel file, or other)</p><p><br></p><p>*This is planned to be monthly report, but the duration and /or frequency will be individually noticed upon the time of interview.(Can be a one-time job, or can be long-term but quarterly job, etc.)</p><p><br></p><p>#Duties and responsibilities</p><p><br></p><p>- To visit stores and collect market info and issues on a monthly basis</p><p><br></p><p>*KT&G holds the rights to set the desired number of products to conduct the price research of the month.</p><p><br></p><p>*KT&G holds the rights to set the desired number of store to conduct the price research of the month.</p><p><br></p><p>* The number/proportion of retail and wholesale stores to be visited are to be set by KT&G.</p><p><br></p><p>*The initial plan is to assign research of average 15 tobacco products, at 12 stores. This is likely to change. However, the total number of data (for example: 15 products * 12 stores =180) will be less than 300, per month.</p><p><br></p><p>- To write/type and send monthly report within the deadline</p><p><br></p><p>* If the report quality does not meet KT&G's standards, the contract can be terminated at any time. KT&G holds the rights to request for additional(reinforcement) visit when the quality of the report is below expectation.</p><p><br></p><p>If worker refuses to make corrections, or if the corrected report is still below standard, KT&G may unilaterally deduct part of the payment.</p><p><br></p><p><br></p><p><br></p><p># Working conditions</p><p><br></p><p>This position is a contractor(a freelancer, not a full time job)</p><p><br></p><p>If additional mission are given, additional payment will be made as well per case.</p><p><br></p><p># Pay : $200 per month</p><p><br></p><p>*The Payment will be based on USD, so the receiving amount in the local currency might differ according to the exchange rate.</p><p><br></p><p>Job Type: Part-time</p><p><br></p><p>Skills</p><p># Qualifications</p><p><br></p><p>- Career Requirement</p><p><br></p><p>Must live in the hiring city and be able to visit around 12 stores within the city each month.</p><p><br></p><p>* The experience of working in the tobacco or FMCG industry or working as a surveryor is largely preferred</p><p><br></p><p>- Knowledge</p><p><br></p><p>Language : Intermediate level of English in writing and speaking</p><p><br></p><p>Computer usage skill: Intermediate level (Excel, PPT)</p><p><br></p><p># Education</p><p><br></p><p>No requirements(Bachelor's degree or above is preferred)</p> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p>Skills</p><p># Qualifications</p><p><br></p><p>- Career Requirement</p><p><br></p><p>Must live in the hiring city and be able to visit around 12 stores within the city each month.</p><p><br></p><p>* The experience of working in the tobacco or FMCG industry or working as a surveryor is largely preferred</p><p><br></p><p>- Knowledge</p><p><br></p><p>Language : Intermediate level of English in writing and speaking</p><p><br></p><p>Computer usage skill: Intermediate level (Excel, PPT)</p><p><br></p><p># Education</p><p><br></p><p>No requirements(Bachelor's degree or above is preferred)</p></div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Job Summary Provide high-quality banking services to individual customers by handling inquiries, accurately processing transactions, and providing the necessary support to enhance the customer experience and improve service quality.<br> Key Duties & Responsibilities Welcome customers and provide the required support within the branch.<br> Respond to customer inquiries and provide accurate information about banking products and services.<br> Execute customers’ daily banking transactions, such as account opening, data updates, and card issuance.<br> Follow up on customer requests and ensure their completion within the appropriate timeframe.<br> Assist in promoting and selling banking products to individual customers.<br> Handle customer complaints, provide appropriate solutions, or refer them to the concerned departments.<br> Comply with applicable policies, procedures, and regulatory requirements.<br> Prepare periodic reports on customer service levels and customer satisfaction.<br> Bachelor's degree in Accounting, Finance, Business Administration, or any related field.<br> 1-3 years of relevant experience in the banking sector or in a similar role.<br></span> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Job Summary Provide high-quality banking services to individual customers by handling inquiries, accurately processing transactions, and providing the necessary support to enhance the customer experience and improve service quality.<br> Key Duties & Responsibilities Welcome customers and provide the required support within the branch.<br> Respond to customer inquiries and provide accurate information about banking products and services.<br> Execute customers’ daily banking transactions, such as account opening, data updates, and card issuance.<br> Follow up on customer requests and ensure their completion within the appropriate timeframe.<br> Assist in promoting and selling banking products to individual customers.<br> Handle customer complaints, provide appropriate solutions, or refer them to the concerned departments.<br> Comply with applicable policies, procedures, and regulatory requirements.<br> Prepare periodic reports on customer service levels and customer satisfaction.<br> Bachelor's degree in Accounting, Finance, Business Administration, or any related field.<br> 1-3 years of relevant experience in the banking sector or a in a similar role.<br></span> </div>
Under direct supervision, independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment to make minor adaptations and modifications.</p>
<p>With additional experience in one functional area, assists in designing larger and more complex assignments involving conventional plans, investigations, and surveys with relatively few complex features and established precedents.</p>
<p>Job tasks, when performed correctly, indirectly affect cost containment, efficiency, profitability, or operations.</p>
<p>Skills are typically acquired through an undergraduate degree in engineering and at least two years of related experience. Typical experience ranges from three to seven years.</p>
<h4 class="header-ribbon">About the Company</h4>
<p></p><p>We deliver science, technology and engineering solutions to governments and companies around the world. KBR employs approximately 28,000 people performing diverse, complex and mission critical roles in 34 countries.</p>
<p>KBR is proud to work with its customers across the globe to provide technology, value-added services, and long-term operations and maintenance services to ensure consistent delivery with predictable results. At KBR, We Deliver.</p>
<p></p>
<p> <strong> Responsibilities:</strong> </p> <ul> <li>Lead the BD team and ensure achievement of business targets.</li> <li>Drive corporate acquisition for Payroll and Payment Gateway services.</li> <li>Monitor team performance, KPIs, and sales pipeline.</li> <li>Prepare daily, weekly, and monthly performance reports.</li> <li>Support deal negotiations, closure, and client onboarding.</li> <li>Coordinate with internal teams to ensure successful go-live.</li> </ul><ul> <li> Minimum 3 5 years of experience in Business Development, preferably in FinTech, digital payments, or banking. </li> <li> Previous experience leading BD or sales teams. </li> <li> Knowledge of Payroll and Payment Gateway solutions. </li> <li> Strong KPI, CRM, and performance reporting skills. </li> <li> Experience using AI and reporting tools. </li> <li> Strong negotiation and deal-closing skills. </li> <li> Ability to manage client onboarding and go-live. </li> </ul><p><strong>Desired Candidate Profile</strong></p><ul> <li> Minimum 3 5 years of experience in Business Development, preferably in FinTech, digital payments, or banking. </li> <li> Previous experience leading BD or sales teams. </li> <li> Knowledge of Payroll and Payment Gateway solutions. </li> <li> Strong KPI, CRM, and performance reporting skills. </li> <li> Experience using AI and reporting tools. </li> <li> Strong negotiation and deal-closing skills. </li> <li> Ability to manage client onboarding and go-live. </li> </ul>
<ul><li>Lead fitters and helpers in the installation of BOP mechanical equipment, including pumps, heat exchangers, tanks, filters and auxiliary skids, in accordance with project requirements.</li><li>Read approved equipment General Arrangement, foundation and equipment installation drawings to verify equipment location, orientation, elevation and anchor bolt positions.</li><li>Perform equipment positioning, leveling, shimming, alignment and grouting preparation in accordance with project and manufacturer requirements.</li><li>Perform pump-motor alignment, including soft foot checks, shaft alignment measurements and verification against manufacturer tolerances.</li><li>Coordinate mechanical interface with piping, civil, E&I and commissioning teams, and check equipment condition, preservation, foundations, anchor bolts and installation materials before starting work.</li></ul><ul><li>Perform equipment alignment checks in accordance with project and manufacturer requirements, bolt tightening and piping connections, ensuring compliance with manufacturer tolerances.</li><li>Plan daily activities, coordinate manpower, tools and materials, report progress, ensure compliance with site HSE requirements, including PTW/JSA, lifting and working-at-height safety and stop and report unsafe activities</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<br>Company Description<br><br><p><strong>Why work for Accor?</strong></p><br><p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.</p><br><p><br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/</p><br><p>Do what you love, care for the world, dare to challenge the status quo! <strong>#BELIMITLESS</strong></p><br><br>Job Description<br><br><p>We are seeking an experienced and innovative Specialty Restaurant Chef to lead our culinary operations in Baghdad, Iraq. In this role, you will be responsible for creating exceptional dining experiences through your expertise in specialty cuisine preparation, kitchen management, and team leadership. The ideal candidate will combine technical precision with creative culinary vision while maintaining the highest standards of food quality and safety.</p><br><ul><li>Develop and execute innovative specialty menus that showcase culinary expertise and appeal to our diverse clientele</li><li>Oversee all kitchen operations, including food preparation, cooking techniques, and plating standards to ensure consistency and excellence</li><li>Manage kitchen staff, providing guidance, training, and performance feedback to maintain a high-performing culinary team</li><li>Maintain strict adherence to food safety regulations, hygiene standards, and health codes</li><li>Control food costs and inventory management while optimizing ingredient utilization and minimizing waste</li><li>Collaborate with management to plan seasonal menus and special dining events</li><li>Ensure quality control across all dishes, conducting tastings and adjusting recipes as needed</li><li>Source and evaluate specialty ingredients, including local Iraqi products and international items</li><li>Mentor junior chefs and kitchen staff, fostering a culture of continuous learning and professional development</li><li>Communicate effectively with front-of-house staff to ensure seamless service delivery</li></ul><br>Qualifications<br><br><ul><li>Minimum 5 years of professional culinary experience in specialty or fine dining restaurants</li><li>Advanced knowledge of specialty cuisine preparation techniques and food presentation</li><li>Proven experience in kitchen management and staff supervision</li><li>Strong understanding of food safety protocols, sanitation standards, and health regulations</li><li>Proficiency in menu development, recipe creation, and culinary innovation</li><li>Excellent organizational and time management skills</li><li>Demonstrated ability to manage food costs and inventory effectively</li><li>Strong communication and interpersonal skills with ability to lead and motivate teams</li><li>Experience working with diverse ingredient sources and culinary traditions</li><li>Preferred: Experience with Middle Eastern or Iraqi cuisine</li><li>Preferred: Background in fine dining or upscale restaurant environments</li></ul> </div>
<strong>Why work for Accor?</strong></p>
<p>We are far more than a worldwide leader. We welcome you as you are, and you can find a job and brand that match your personality. We support you to grow and learn every day, making sure that work brings purpose to your life. During your journey with us, you can continue to explore Accor’s limitless possibilities.</p>
<p>By joining Accor, every chapter of your story is yours to write, and together we can imagine tomorrow’s hospitality.</p>
<p>Do what you love, care for the world, and dare to challenge the status quo! #BELIMITLESS</p>
<h4>Job description</h4>
<p>We are seeking a dedicated and customer-oriented waiter or waitress to join our team in Baghdad, Iraq. As a key member of our restaurant staff, you will play a crucial role in ensuring our guests have an exceptional dining experience.</p>
<ul>
<li>Greet and welcome guests in a friendly and professional manner.</li>
<li>Take accurate food and beverage orders using appropriate point-of-sale systems.</li>
<li>Serve food and drinks with attention to detail and presentation.</li>
<li>Anticipate guest needs and respond promptly to requests.</li>
<li>Maintain a clean and organized dining area.</li>
<li>Collaborate with kitchen staff to ensure timely food delivery.</li>
<li>Handle cash and credit card transactions accurately.</li>
<li>Upsell menu items and promote daily specials.</li>
<li>Adhere to all food safety and hygiene standards.</li>
<li>Assist in setting up and closing down the restaurant.</li>
<li>Contribute to a positive team environment by supporting colleagues during busy periods.</li>
</ul>
<h4>Qualifications</h4>
<ul>
<li>Excellent interpersonal and communication skills.</li>
<li>Strong problem-solving abilities and attention to detail.</li>
<li>Ability to work efficiently in a fast-paced environment.</li>
<li>Demonstrated teamwork and collaboration skills.</li>
<li>Customer-focused mindset with the ability to remain calm and courteous under pressure.</li>
<li>Knowledge of food safety and hygiene practices.</li>
<li>Flexibility to work various shifts, including weekends and holidays.</li>
</ul>
<h4 class="header-ribbon">About the Company</h4>
<p></p><p>A caring employer providing respect, training and career development for our employees. An attractive employer offering more than 100 professions across the 5 continents.</p>
<p>We are much more than a world leader. We are 250,000 hoteliers with the same shared passion for welcoming. We take care of millions of guests in our 4,300 addresses and on our digital platforms. As an operator and franchisor (HotelServices), owner and investor (HotelInvest), we invest all our energy into making "Feel Welcome" resonate as the finest hotel promise.</p>
<p>From luxury to economy and in every corner of the globe, AccorHotels' more than 20 brands meet all the needs of business and leisure travelers seeking comfort, attention and high-quality services.</p>
<p></p>
<p><br></p> <p> <strong>Job Summary</strong> </p> <p>The Mechanical Engineer is directly responsible for the supervision, co-ordination and record keeping of all maintenance related activities on the plant site.</p> <p> <strong>Essential Duties & Responsibilities:</strong> </p> <ul> <li>Controls all maintenance documents as outlined on the site Master List of Controlled Documents.</li> <li>Assigns preventive and corrective maintenance jobs to maintenance technicians as per the direction of Maintenance Manager.</li> <li>Develop, supervises and co-ordinate plant maintenance activities.</li> <li>Plan and inspect completed work on plant device.</li> <li>Maintain records, prepare reports and compose correspondence relative to work.</li> <li>Acquire considerable knowledge of the process and the relevant mechanical, instrument & control and electrical system throughout the plant and apply the same to trouble shoot problems and leads the maintenance team in resolving the issue.</li> <li>Train the subordinates on preventive and corrective maintenance.</li> <li>Communicate effectively with others, both verbally and in writing.</li> <li>Execute work order through CMMS and co-ordinate with Electrical Technicians for job completion and technical matters.</li> <li>Assist Maintenance Manager in planning and scheduling outage works with due regard to annual scheduled maintenance plan.</li> <li>Assess plant needs for spare parts & supplies and generate material requisitions.</li> <li>Co-ordinate with Stores and Procurement for stock inventory.</li> <li>Acquire full knowledge of EHS policies & procedures and ensures compliance.</li> <li>Evaluate, plan and actively participate in plant housekeeping.</li> <li>Assist and co-ordinate with EHS Manager/Supervisor with all EHS activities including implementation of policies/procedures, inspections and audits.</li> <li>Understand OH&S risks / hazards and Environmental / legislative aspect / Impacts related to work activities.</li> <li>Perform assigned tasks as given in Quality Manual I, II and EHS Manual</li> <li>Travel may be required</li> <li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li> <li>You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li> </ul> <p> <strong>Required Qualifications & Experience</strong>:</p> <ul> <li>Bachelor of Science in Mechanical Engineering from a recognized University with 5-7 years experience in similar capacity at combined cycle power plant preferably having GE F Class Technology</li> <li>English proficiency required</li> </ul> <p> <strong>Desired Characteristics:</strong> </p> <ul> <li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.</li> <li>Ability to write routine reports and correspondence.</li> <li>Ability to speak effectively to employees of the organization</li> </ul> <p> <strong> </strong> </p> <p> <em>FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law</em> </p>
<p></p>
<p><h4>Belong, connect, grow, with KBR!</h4>
<p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p>
<p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p>
<h4>Job description: Commissioning manager</h4>
<p><strong>Location:</strong> Iraq (28/28 rotational assignment)</p>
<h4>Job responsibility and requirement</h4>
<p>The commissioning manager shall be responsible for the commissioning deliverables of KBR Majnoon projects, managing team and resources to ensure the scope of work is executed in a safe timely manner in line with project schedule and milestones.</p>
<p>Manage and lead commissioning team and vendors, monitoring progress and ensuring work execution is both safe and best practices.</p>
<p>Development of commissioning execution plans, schedules and procedures.</p>
<p>Focal start up and operational readiness communications with management team, client and facilitate handover activities.</p>
<h4>Accountability / expectations</h4>
<ul>
<li>Lead by example and coach good HSE and safe working practices.</li>
<li>Develop commissioning strategy and execution plans.</li>
<li>Develop commissioning and input to the integrated schedule – in line with project timeline and milestones.</li>
<li>Develop commissioning and start-up procedures.</li>
<li>Coordinate between the engineering, construction, and operation teams to ensure that all systems are installed, tested, verifying readiness for RFSU claims.</li>
<li>Manage completion systemization and implementation to ensure works can progress methodically and efficiently.</li>
<li>Manage resources to ensure preparation and review of commissioning procedures, completions system and RLMs.</li>
<li>Ensure test records of all commissioning activities, including test results, reports, and any issues encountered are accurate and compiled in line with completions strategies.</li>
<li>Ensure all commissioning dossiers and documentation is completed, updated, and ready for review and handover.</li>
<li>Manage commissioning vendor requirements.</li>
<li>Develop work execution flow scheme (WEFS).</li>
<li>Develop readiness and ORA documentation, PSSR, PSUA, SOF to support RFSU certification claims.</li>
<li>Develop commissioning consumables list and commissioning spares list.</li>
<li>Develop and implement project to asset transfer plan (P2A) comprising of physical assets with system turnover team and the information management documents.</li>
<li>Drive the flawless project delivery (FPD) with a focused ownership on the FPD deliverables specific for the CSU areas.</li>
<li>Manage and support interface with the asset’s operations & maintenance during start up and handover.</li>
</ul>
<h4>Experience required:</h4>
<ul>
<li>20+ years of experience in oil & gas industry.</li>
<li>Bachelor honours degree in a relevant engineering discipline from a recognised institution.</li>
<li>Master’s degree in relevant engineering discipline.</li>
</ul></p><p></p>
<h4>Main Duties and Responsibilities:</h4><ul><li>Develop, coordinate and implement the WFD strategy, framework and annual priorities in alignment with business objectives, operational requirements and localisation commitments.</li><li>Work with HR and department managers to identify current and future workforce capability requirements and recommend appropriate development solutions.</li><li>Manage and coordinate the implementation and continuous improvement of the Competency-Based Framework (CBF), promoting consistent application of competency assessment and development processes across relevant functions and locations.</li><li>Coordinate the identification and assessment of training and development needs in collaboration with department managers, designated CBF mentors, WFD coordinators and HR colleagues.</li><li>Review competency assessments, Personal Development Plans (PDPs), performance-related development needs and operational requirements to identify workforce capability gaps and appropriate development priorities.</li><li>Coordinate and oversee learning and development initiatives, including annual training plans, technical and non-technical training, internal and external development programmes, mentoring and other capability-building activities.</li><li>Support managers in developing, reviewing and monitoring PDPs, ensuring that development actions address identified competency gaps and align with employee development objectives and organisational requirements.</li><li>Monitor and evaluate training effectiveness and outcomes, gather relevant feedback and recommend improvements to programme quality.</li><li>Maintain appropriate training records and development information to support monitoring, reporting and informed decision-making.</li><li>Coordinate succession planning and career development initiatives to strengthen internal talent pipelines and support continuity in critical positions.</li><li>Work with department managers to identify development priorities for employees</li><li>Support graduate development programmes, internships, apprenticeships and other early-career initiatives.</li><li>Support localisation objectives through workforce development initiatives that strengthen the capability of national employees and prepare them for increased responsibility in line with business needs.</li><li>Coordinate structured knowledge-transfer, mentoring, coaching and handover arrangements, including the transfer of technical expertise from expatriate employees to national employees.</li><li>Work with relevant stakeholders to align workforce development initiatives with applicable local employment and training requirements.</li><li>Work closely with WFD team, department managers and CBF mentors and other relevant stakeholders to ensure that workforce development activities address operational and organizational needs.</li><li>Coordinate with external training providers, educational institutions and relevant partners to support the delivery of development initiatives.</li><li>Maintain accurate WFD records, competency and training trackers, development dashboards and related documentation.</li><li>Monitor progress against agreed WFD objectives, activities and KPIs and prepare regular reports, analysis and recommendations.</li><li>Review WFD processes, tools and initiatives, identify opportunities for improvement and support the integration of workforce development activities into broader HR .<br> Budget</li><li>Manage the training budget in coordination with other department requirements including planning, forecasting, expenditure tracking, and reporting, to ensure workforce development initiatives are </li><li>delivered within approved financial parameters and provide value to the organization.</li><li>Demonstrate continued commitment to Health, Safety and Environmental (HSE) excellence by complying with applicable policies, procedures and life-saving rules. Identify and manage risks and support the investigation of incident and hazards.</li></ul><h4><br></h4><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor s degree in Human Resources or a related discipline.</li><li>Minimum of 10 years experience in HR or a related field.</li><li>5-10 years relevant experience in workforce development, learning and development, competency management, talent development or a related area.</li><li>Experience coordinating training initiatives, identifying development needs and supporting employee development planning.</li><li>Experience working with managers and other stakeholders to identify workforce capability requirements and implement development solutions.</li><li>Experience in a structured or competency-based organisation is desirable.</li><li>Knowledge of workforce development strategy, learning and development principles, and workforce capability planning.</li><li>Understanding competency-based frameworks, competency assessment processes and training needs analysis.</li><li>Ability to coordinate training plans, development programmes and individual development plans.</li><li>Understanding of succession planning, career development, mentoring and knowledge-transfer approaches.</li><li>Ability to monitor and evaluate training effectiveness, analyse development outcomes and identify opportunities for improvement.</li><li>Ability to maintain accurate WFD records, dashboards, trackers and management reports.</li><li>Good working knowledge of Microsoft Office and relevant reporting tools.</li><li>Understanding of localisation and applicable workforce development or training obligations</li><li>Strong communication, interpersonal and stakeholder-management skills.</li><li>Strong planning, coordination, organisational and prioritisation skills.</li><li>Ability to build effective working relationships with managers, employees and external stakeholders.</li><li>Ability to influence, provide guidance and coordinate implementation across functions and locations.</li><li>Analytical thinking, problem-solving and continuous improvement mindset.<br> <br> </li></ul>
<p><h4>About KBR</h4>
<p>Belong, connect, grow with KBR!</p>
<p>The KBR team of teams delivers future-forward science, technology, and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives while also helping achieve their sustainability goals.</p>
<p>KBR Sustainable Technology Solutions provides holistic, value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p>
<p>KBR is looking for a construction manager (local national) to be based in Basra, Iraq, with a daily commute.</p>
<h4>Job dimensions</h4>
<p>Lead and manage all site construction activities for the WIP-CSSP project, ensuring safe, timely, and cost-effective execution of the work.</p>
<p>Ensure construction activities are executed in accordance with approved engineering deliverables, project specifications, quality requirements, and HSE standards.</p>
<p>Coordinate all construction disciplines and interfaces to achieve construction milestones and project objectives.</p>
<p>Monitor and manage EPC contractor construction performance, productivity, and compliance with contractual obligations.</p>
<p>Promote a strong safety culture and ensure construction activities comply with company HSSE requirements.</p>
<h4>Activities</h4>
<p><strong>Construction management</strong></p>
<p>Lead and supervise all site construction activities, covering:</p>
<ul>
<li>Civil and structural works</li>
<li>Mechanical installation</li>
<li>Piping works</li>
<li>Electrical works</li>
<li>Instrumentation and control systems</li>
<li>Buildings and infrastructure</li>
<li>Utilities and supporting facilities</li>
</ul>
<p>Ensure construction activities are executed according to:</p>
<ul>
<li>Approved AFC drawings</li>
<li>Specifications and procedures</li>
<li>Project schedule and priorities</li>
<li>Applicable regulations and standards</li>
</ul>
<ul>
<li>Coordinate site activities to optimize construction sequencing and resource utilization.</li>
<li>Monitor construction progress and identify recovery actions when required.</li>
</ul>
<p><strong>Contractor management</strong></p>
<ul>
<li>Manage and oversee EPC contractor and subcontractor construction teams.</li>
<li>Conduct regular construction coordination meetings.</li>
<li>Review construction schedules, manpower plans, equipment deployment plans, and construction methodologies.</li>
<li>Monitor contractor productivity and performance against project objectives.</li>
<li>Ensure contractors implement approved procedures and construction practices.</li>
</ul>
<p><strong>Interface and coordination</strong></p>
<p>Coordinate interfaces between:</p>
<ul>
<li>Engineering</li>
<li>Procurement</li>
<li>Construction</li>
<li>Commissioning</li>
<li>Operations</li>
<li>HSE and quality teams</li>
</ul>
<ul>
<li>Ensure construction readiness before execution.</li>
<li>Resolve construction issues and interface conflicts promptly.</li>
<li>Support multidisciplinary coordination and decision-making.</li>
</ul>
<p><strong>Construction planning and progress</strong></p>
<ul>
<li>Review and validate construction execution plans.</li>
<li>Monitor construction KPIs and progress against approved schedules.</li>
<li>Identify risks to construction execution and implement mitigation plans.</li>
<li>Participate in weekly and monthly progress reviews.</li>
<li>Ensure accurate reporting of construction status and forecast completion dates.</li>
</ul>
<p><strong>Quality management</strong></p>
<ul>
<li>Ensure all construction activities comply with project quality requirements.</li>
<li>Coordinate with QA/QC personnel for inspections and testing activities.</li>
<li>Monitor punch lists and non-conformities.</li>
<li>Ensure timely closure of quality issues and corrective actions.</li>
</ul>
<p><strong>Handover and commissioning support</strong></p>
<ul>
<li>Support mechanical completion activities.</li>
<li>Ensure construction dossiers and turnover packages are complete.</li>
<li>Coordinate system handovers to commissioning teams.</li>
<li>Support commissioning, start-up, and operational readiness activities.</li>
</ul>
<h4>HSE responsibilities</h4>
<ul>
<li>Demonstrate visible safety leadership and promote a strong HSSE culture.</li>
<li>Ensure compliance with project HSE requirements, site procedures, permit-to-work requirements, and environmental regulations.</li>
<li>Participate in site safety audits, management safety walks, incident investigations, and risk assessments.</li>
<li>Ensure unsafe acts and conditions are addressed immediately.</li>
<li>Stop work when safety requirements are not met.</li>
</ul>
<h4>Required qualifications and experience</h4>
<p><strong>Professional experience</strong></p>
<ul>
<li>Minimum of 15 years of experience in construction management on major EPC/EPSCC projects.</li>
<li>Proven experience on large industrial, oil and gas, energy, infrastructure, or utility projects.</li>
<li>Strong experience managing multidisciplinary construction activities from detailed engineering through commissioning.</li>
<li>Minimum of 5 years as a construction manager, site manager, or in an equivalent leadership role.</li>
<li>Experience in greenfield megaprojects is preferred.</li>
<li>Previous Middle East and/or remote site experience is highly desirable.</li>
</ul>
<p><strong>Technical skills</strong></p>
<p>Strong knowledge of:</p>
<ul>
<li>Construction methodologies</li>
<li>Multidisciplinary installation activities</li>
<li>Construction planning and scheduling</li>
<li>Contractor management</li>
<li>Mechanical completion and turnover processes</li>
<li>HSE leadership</li>
<li>Quality management systems</li>
</ul>
<p>Strong understanding of EPC/EPSCC project execution.</p>
<p><strong>Education and qualifications</strong></p>
<ul>
<li>Bachelor’s degree in engineering (mechanical, civil, electrical, process, or equivalent).</li>
<li>Professional accreditation or a recognized project or construction management certification is an advantage.</li>
</ul>
<p><strong>Languages</strong></p>
<p>Proficiency in English is mandatory.</p>
<p><strong>Soft skills</strong></p>
<ul>
<li>Strong leadership and people management capabilities.</li>
<li>Excellent communication and stakeholder management skills.</li>
<li>Strong decision-making and problem-solving abilities.</li>
<li>Ability to work effectively in a multicultural environment.</li>
<li>Results-oriented, with a strong focus on safety, quality, and schedule performance.</li>
</ul>
<p>Interested and suitable candidates are encouraged to apply. Suitable candidates will be contacted directly.</p></p><p></p>
<p><h4>Belong, connect, grow with KBR!</h4>
<p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p>
<p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p>
<h4>Job purpose</h4>
<p>Production Support Engineer is part of the production planning section in the Petroleum Engineering Department. The primary purpose of the job is to ensure technical support to wells performance, close monitoring of daily production plans, well test plans, daily production allocation and be focal point between WRFM and operations departments.</p>
<h4>Duties and responsibilities</h4>
<ul>
<li>Production well testing - write well test procedures and instructions, execution, validation of data</li>
<li>Provide a smooth interface between Production Operations and other Petroleum Engineering, e.g. leading and coordinating near real-time optimization such as operating guidelines, well testing and production trials</li>
<li>Create short-term production plans and targets</li>
<li>Near real-time to short-term production activities scheduling, surveillance and optimization of integrated production systems with due consideration for WRFM, asset integrity and HSSE</li>
<li>Ensure daily production-related data is entered into Energy Components, is accurate and ready for approval by Field Manager before Operations Morning Calls</li>
<li>Pro-active production surveillance (wells, facility, export)</li>
<li>Hydrocarbon accounting, production data management and reporting</li>
<li>Assist in determining daily production targets and achieving these daily</li>
<li>Establish new ways of working</li>
<li>Deferment management</li>
<li>Act as first line support for Operations for all issues related to Energy Components, production data and Integrated Production System performance</li>
<li>Support startup of the hydrocarbon systems; achieve on target and on spec production</li>
<li>Production reporting (Field Ops/Production Daily Reports), daily production allocation</li>
<li>Maintain up-to-date well bean up procedures and production priorities</li>
<li>Execute front line production surveillance</li>
<li>Field Technology champion for deploying new Operations related technologies</li>
<li>Participate in WRFM activities</li>
</ul>
<h4>Qualifications</h4>
<ul>
<li>Degree in Petroleum Engineering</li>
<li>Minimum 8 years' experience with an operator, familiar with programming teamwork flow, work scope and background in production engineering</li>
<li>Up-to-date experience in well production plans, well testing plans, hydrocarbon allocation and well optimization</li>
<li>Good knowledge of production allocation using EC software</li>
<li>Knowledge of well completion, intervention and rigless activities and regulations</li>
<li>Knowledge of PE standard software: OEM, PI, PVTSim, Kappa's Sapphire and other standard software: Eclipse, Petrel RE, etc.</li>
<li>Communication skills with team members from different cultures and with clients</li>
</ul>
<h4>Experience</h4>
<ul>
<li>Minimum 10-15 years' experience with an operator with in-depth technical knowledge and capability in petroleum engineering, daily well management, and team management</li>
<li>Strong technical background in reservoir engineering or related discipline</li>
<li>Familiarity with reservoir management including production maintenance and well management</li>
<li>Experience working in a multi-cultural and multi-national team</li>
</ul>
<h4>Language proficiency, computer and software skills</h4>
<ul>
<li>Must be able to speak upper intermediate and above English; Arabic is an advantage</li>
<li>Experience and knowledge of advanced level PI (Process book), Energy Components</li>
<li>Knowledge of Prosper and GAP will be an advantage</li>
</ul>
<h4>Skills</h4>
<ul>
<li>Good communication and analytical skills are essential</li>
<li>Eagerness to learn and develop own skills</li>
<li>Strong leadership skills, ability to delegate, and work with minimum supervision</li>
<li>Must have an HSSE driven mindset</li>
<li>Self-starter and proactive 'go getter'</li>
<li>Be sufficiently flexible to work outside the normal boundaries and to integrate quickly into the Majnoon project</li>
<li>The ability to work with people from different cultural backgrounds is essential; the position will involve working with government or partner representatives</li>
<li>Ability to quickly determine the optimal production solution, often with conflicting or missing data or information</li>
<li>Good diagnostic skills are required to troubleshoot problems</li>
<li>Must be able to communicate at a technical level with various stakeholders including:</li>
<ul>
<li>Production Technologists: well inflow performance and well integrity</li>
<li>Reservoir Engineers: production forecasts</li>
<li>Finance/Commercial department: reporting and forecasting of produced and export volumes</li>
<li>Operations, HSE & Maintenance: system performance, environmental-related reporting and optimization opportunities</li>
<li>Metering: metering and mis-measurement issues</li>
</ul>
</ul></p><p></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><span><span><strong>Job Overview </strong></span></span></p><br><p><span><span>The ALS Field Specialist II is responsible for delivering safe, efficient, and high-quality Artificial Lift Systems (ALS) services with a primary focus on Jet Pump operations. The role supports field execution, equipment monitoring, maintenance activities, operational reporting, and client service while maintaining full compliance with Weatherford QHSE standards. The ALS Field Specialist II works closely with supervisors and field teams to ensure reliable job execution, operational excellence, and customer satisfaction.</span></span></p><br><p><span><span><strong>Responsibilities:</strong></span></span></p><br><ul><li><p><span><span>Execute and support ALS field operations, including Jet Pump installation, maintenance, troubleshooting, and optimization activities.</span></span></p><br></li><li><p><span><span>Monitor operational performance and accurately record field operation parameters and job data.</span></span></p><br></li><li><p><span><span>Maintain and track tools, equipment, spare parts, and consumable inventories.</span></span></p><br></li><li><p><span><span>Assist with job preparation, equipment commissioning, mobilization, and demobilization activities.</span></span></p><br></li><li><p><span><span>Support field supervisors in delivering safe, efficient, and high-quality services to customers.</span></span></p><br></li><li><p><span><span>Ensure compliance with company QHSE policies, procedures, and operational standards.</span></span></p><br></li><li><p><span><span>Identify, report, and address hazards, incidents, unsafe conditions, and non-conformances.</span></span></p><br></li><li><p><span><span>Participate in safety meetings, emergency response drills, and continuous improvement initiatives.</span></span></p><br></li><li><p><span><span>Maintain accurate operational records, reports, and documentation.</span></span></p><br></li><li><p><span><span>Perform additional duties assigned by ALS leadership to support business and operational requirements.</span></span></p><br></li></ul><p><span><span><strong>Skills:</strong></span></span></p><br><ul><li><p><span><span>Knowledge of Artificial Lift Systems and Jet Pump operations.</span></span></p><br></li><li><p><span><span>Strong troubleshooting and mechanical aptitude.</span></span></p><br></li><li><p><span><span>Ability to work independently and as part of a field team.</span></span></p><br></li><li><p><span><span>Effective communication and interpersonal skills.</span></span></p><br></li><li><p><span><span>Strong safety awareness and commitment to quality standards.</span></span></p><br></li><li><p><span><span>Good organizational, reporting, and documentation skills.</span></span></p><br></li><li><p><span><span>Proficiency in Microsoft Office applications including Word, Excel, Outlook, and PowerPoint.</span></span></p><br></li><li><p><span><span>Ability to adapt to changing operational priorities and field conditions.</span></span></p><br></li><li><p><span><span>Understanding of operational monitoring, equipment maintenance, and field execution processes.</span></span></p><br></li></ul><p><span><span><strong>Qualifications:</strong></span></span></p><br><p><span><span><strong>Required</strong></span></span></p><br><ul><li><p><span><span>Bachelor’s degree in engineering or a related technical discipline.</span></span></p><br></li><li><p><span><span>Minimum 5 years of experience in Jet Pump operations and Artificial Lift Systems field activities.</span></span></p><br></li><li><p><span><span>Good English communication skills, both written and verbal.</span></span></p><br></li><li><p><span><span>Working knowledge of Microsoft Office applications.</span></span></p><br></li><li><p><span><span>Strong technical understanding of ALS equipment, operations, and field procedures.</span></span></p><br></li><li><p><span><span>Medically fit for field-based assignments.</span></span></p><br></li></ul><p><span><span><strong>Preferred</strong></span></span></p><br><ul><li><p><span><span>Experience working in high H</span></span><span><span>₂</span></span><span><span>S oil and gas environments.</span></span></p><br></li><li><p><span><span>Previous experience supporting ALS projects and wellsite operations.</span></span></p><br></li><li><p><span><span>Exposure to competency development programs and structured technical training.</span></span></p><br></li><li><p><span><span>Experience working within international oilfield service environments.</span></span></p><br></li></ul><p><span><span>#LI-MD1</span></span></p><br><br> <p><span>Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. </span></p><br> <p><span>We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. </span></p><br> <p><span>Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, world-class team. </span></p><br> <p><span>When you join Weatherford, you instantly feel connected to something bigger – a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other’s successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. </span></p><br> <p><b><span>Join Us: </span></b></p><br> <p><span>Weatherford is producing energy for today and tomorrow- with global opportunities as unlimited as your sense of adventure. Join us to make an impact on our customers, the industry, and the world. </span></p><br> <p><span>Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.</span></p><br> <br> <br> <br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Carpenter Manager, the Carpenter Supervisor supervise a team which constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools, and conforming to building codes. Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Supervise a team which constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools, and conforming to building codes. + Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated. + Perform other duties as required Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Education: High school diploma or equivalent. Must provide a copy of the diploma. + Must be a U.S. Citizen + Must be able to obtain Host Country Passenger Vehicle license + Experience: + Minimum of 5 - 10 Years in the construction Industry, with at least 3 Years in Supervisory or Leadership role experience managing carpentry crews, coordinating with subcontractors, and overseeing material deliveries is essential. + Evidence of completion of trade school and/or a minimum of Four (4) years of apprenticeship training preferred. + Proven ability to handle Quality Control, Safety Compliance, and budget Management. + Skills: + Ability to supervise employees effectively, work under pressure, strict timelines and regulations + Analytical skills to be able to solve work-related problems. + Manual dexterity for installing material, and equipment, to meet specifications. + Must have proficient communication skills in English both written and oral. + Requires a collaborative work style, fostering cooperation, and teamwork. + Must exercise discretion and good sound judgment. + Must have basic computer skills. + Must have a thorough understanding of IBC Civil / Carpentry Standards + Supervisory Requirements: + Supervises a team of carpenters/construction workers. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>
<p>Section Head, Security Standards, Quality Assurance & Compliance (HoSQC)
The post holder is responsible for the daily management of the Standards, Quality Assurance & Compliance (SQC) team, and supporting the Head of Security Operations Support (HoSOS). This is a key role and includes ensuring that all Security Business Unit Departments and Sections adhere to external regulations, laws, and internal policies; identifying and rectifying non-compliance issues through audits; ensuring that processes, products, and services consistently meet AvSec quality standards and preventing defects through systematic activities and continuous improvement.
A solid knowledge of compliance, audit and quality assurance systems and processes is vital, along with the ability to forge relationships with other sub departments and when required, the airport directorate, agencies and external stakeholders.
Key Areas of Responsibility:
a) Leadership: Lead and manage the Standards, Quality Assurance and Compliance Section and its team of staff members.
b) Security provision: To ensure the airport’s security operations meet international standards, comply with ICAO Annex 17, IATA security protocols, and ICAA regulations, while embedding quality assurance, and compliance oversight into all security functions.
c) Security Standards Development: Define and maintain security operational standards across passenger screening, baggage handling, cargo security access control. Align security procedures with ICAO, IATA and ICAA requirements. Maintain the library of SEC documentation, and develop and update programs, Manuals, Plans and SOPs for security functions as required.
d) Quality Assurance: Establish & manage a Security Quality Management System. Conduct audits, inspections and performance reviews of security checkpoints, K9 Units and surveillance systems. Monitor security service delivery against Key Point Indicators (KPIs) and international benchmarks. Implement corrective & preventative measures to address deficiencies.
e) Compliance Oversight: Ensure compliance with aviation security regulations, including ICAO Annex 17 and national directives. Liaise with ICAA and international regulators during inspections and certifications. Maintain documentation and evidence for regulatory audits and certifications. Report compliance risks and mitigation strategies to the Security Headquarters.
f) Risk & Incident Integration: Collaborate with the Airport Safety Management System (SMS) and utilize the Security Management System (SeMS) to integrate security compliance findings into risk assessments. Support incident investigations (e.g. security breaches, prohibited items, etc.) and embed lessons learned into revised standards.
g) Training Awareness: Liaise with the Security Training Team and develop training modules on security standards, compliance and quality assurance for airport security staff. Promote a culture of vigilance, compliance and continuous improvement. Undertake training delivery in support of the Security Training Team, as required.
h) SQC Reporting: Prepare structured reports with clear recommendations and highlight compliance risks with mitigation strategies.</p><p>Education: National Level 3 AvSec Manager or equivalent, Quality Assurance, Auditing or a related field, ISO 9001 Quality Management System Certification or equivalent, Managing Safely (IOSH) or equivalent, Possess an AvSec Training qualification.
Experience: Applicant must have an aviation background in quality assurance, compliance & audit roles. Minimum of 2 years in an Aviation security management role with domestic and/or international experience. Experience of operating in post conflict, multicultural & low infrastructure environments. Minimum of 3 years working within an airport and/or other highly regulated, physical security-based establishment
Computer Skills: Knowledgeable in Microsoft Office suit (user´s perspective) and able to manage other specific project/management software, provided the adequate training.
Language Skills: Solid knowledge and command of written and spoken English. Arabic language skills are desirable.
Training Requirements: Have experience in training delivery in an airport environment.
Behavioral Competencies:
• Excellent leadership and team management skills.
• Driving Change and continuous improvement.
• Strong communication and interpersonal abilities.
• Decision-making and problem-solving aptitude under pressure.
• Customer-focused with a commitment to service excellence.
• Networking, collaborative approach and stakeholders’ engagement and negotiation.
• Conflict resolution and negotiation skills.
• Delivering Results & Fostering Ownership.
• High level of integrity and ethical standards.
Technical Competencies:
• ICAO Aviation Safety & Security regulations & procedures.
• Knowledge of Security Management System (SeMS) principles & practices.
• Expertise in compliance monitoring, risk assessment and audit processes for security operations.
• Data Analysis from audits, inspections, incident reports.
• Audit techniques and use of audit software tools.
• Expertise in developing, implementing & maintaining QMS in accordance with ISO 9001 standards.
• Risk Management – identification of risks and developing strategies to mitigate those risks.
• Strong communication and reporting skills.
• Training design and delivery skill sets.
• Standards Development.</p>
<p>The post holder is responsible for the daily management of the Standards, Quality Assurance & Compliance (SQC) team, and supporting the Head of Security Operations Support (HoSOS). This is a key role and includes ensuring that all Security Business Unit Departments and Sections adhere to external regulations, laws, and internal policies; identifying and rectifying non-compliance issues through audits; ensuring that processes, products, and services consistently meet AvSec quality standards and preventing defects through systematic activities and continuous improvement.
A solid knowledge of compliance, audit and quality assurance systems and processes is vital, along with the ability to forge relationships with other sub departments and when required, the airport directorate, agencies and external stakeholders.
Key Areas of Responsibility:
a) Leadership: Lead and manage the Standards, Quality Assurance and Compliance Section and its team of staff members.
b) Security provision: To ensure the airport’s security operations meet international standards, comply with ICAO Annex 17, IATA security protocols, and ICAA regulations, while embedding quality assurance, and compliance oversight into all security functions.
c) Security Standards Development: Define and maintain security operational standards across passenger screening, baggage handling, cargo security access control. Align security procedures with ICAO, IATA and ICAA requirements. Maintain the library of SEC documentation, and develop and update programs, Manuals, Plans and SOPs for security functions as required.
d) Quality Assurance: Establish & manage a Security Quality Management System. Conduct audits, inspections and performance reviews of security checkpoints, K9 Units and surveillance systems. Monitor security service delivery against Key Point Indicators (KPIs) and international benchmarks. Implement corrective & preventative measures to address deficiencies.
e) Compliance Oversight: Ensure compliance with aviation security regulations, including ICAO Annex 17 and national directives. Liaise with ICAA and international regulators during inspections and certifications. Maintain documentation and evidence for regulatory audits and certifications. Report compliance risks and mitigation strategies to the Security Headquarters.
f) Risk & Incident Integration: Collaborate with the Airport Safety Management System (SMS) and utilize the Security Management System (SeMS) to integrate security compliance findings into risk assessments. Support incident investigations (e.g. security breaches, prohibited items, etc.) and embed lessons learned into revised standards.
g) Training Awareness: Liaise with the Security Training Team and develop training modules on security standards, compliance and quality assurance for airport security staff. Promote a culture of vigilance, compliance and continuous improvement. Undertake training delivery in support of the Security Training Team, as required.
h) SQC Reporting: Prepare structured reports with clear recommendations and highlight compliance risks with mitigation strategies.</p><p>Education: National Level 3 AvSec Manager or equivalent, Quality Assurance, Auditing or a related field, ISO 9001 Quality Management System Certification or equivalent, Managing Safely (IOSH) or equivalent, Possess an AvSec Training qualification.
Experience: Applicant must have an aviation background in quality assurance, compliance & audit roles. Minimum of 2 years in an Aviation security management role with domestic and/or international experience. Experience of operating in post conflict, multicultural & low infrastructure environments. Minimum of 3 years working within an airport and/or other highly regulated, physical security-based establishment
Computer Skills: Knowledgeable in Microsoft Office suit (user´s perspective) and able to manage other specific project/management software, provided the adequate training.
Language Skills: Solid knowledge and command of written and spoken English. Arabic language skills are desirable.
Training Requirements: Have experience in training delivery in an airport environment.
Behavioral Competencies:
• Excellent leadership and team management skills.
• Driving Change and continuous improvement.
• Strong communication and interpersonal abilities.
• Decision-making and problem-solving aptitude under pressure.
• Customer-focused with a commitment to service excellence.
• Networking, collaborative approach and stakeholders’ engagement and negotiation.
• Conflict resolution and negotiation skills.
• Delivering Results & Fostering Ownership.
• High level of integrity and ethical standards.
Technical Competencies:
• ICAO Aviation Safety & Security regulations & procedures.
• Knowledge of Security Management System (SeMS) principles & practices.
• Expertise in compliance monitoring, risk assessment and audit processes for security operations.
• Data Analysis from audits, inspections, incident reports.
• Audit techniques and use of audit software tools.
• Expertise in developing, implementing & maintaining QMS in accordance with ISO 9001 standards.
• Risk Management – identification of risks and developing strategies to mitigate those risks.
• Strong communication and reporting skills.
• Training design and delivery skill sets.
• Standards Development.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for a Quality Manager to join its Singapore Business Unit focusing on driving the implementation of company quality strategies and campaigns. <br> This role is a full-time office-based role in Basra, Iraq.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><strong>Remarkable people, trusted by clients to design and advance the world.</strong></p><br><p>Wood is recruiting for a Quality Manager to join its Singapore Business Unit focusing on driving the implementation of company quality strategies and campaigns. <br> This role is a full-time office-based role in Basra, Iraq.</p><br><p><i><strong>#Wood #Iraq #Basra #Quality Manager</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Quality Manager to join our Singapore Business Unit.</p><br><p><strong>Our Clients and Projects </strong></p><br><p><strong>Designing the future. Transforming the world. </strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. </p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li></ul><p><strong><u>Job Description:</u></strong></p><br><p>Wood is looking to fill Quality Manager position, that is seconded to our Client, providing Quality direction and leadership to the team supporting Major Projects Procurement & Execution Planning.</p><br><p>The Quality Manager is responsible for driving the implementation of company quality strategies and campaigns across the delivery teams and EPC contractors, focusing on the effective deployment of the project management system, assurance processes and robust quality metrics. Ensuring projects deliver a quality service that achieves the requirements of Operations and complies with the relevant international/national codes and standards.</p><br><p>This position reports directly to the Project Manager taking day-to-day direction from the Project Manager and functional direction from the Quality Section Head. The role is accountable for providing Quality and inspection resources, systems and processes to support Procurement activities and Projects & Execution Planning activities.</p><br><p><strong>Key Accountabilities:</strong></p><br><ul> <li>Promotion of both the WOOD & client Core values</li> <li>Develop, maintain & implement Project Quality Plans, Quality Strategies and Objectives</li> <li>Provide Quality oversight of vendors and contractors, ensuring they are aware of their roles and responsibilities.</li> <li>Provide quality estimates for QA/QC project deliverables and inspection of procurement packages.</li> <li>Regular quality reporting as required</li> <li>Ensure the maintenance, documentation, and deployment of the project management system</li> <li>Ensure implementation of risk-based audit programme</li> <li>Plan and partake in internal project and vendors/ suppliers audits</li> <li>Conduct site quality leadership surveillance visits</li> <li>Provide input to contract quality risk registers</li> <li>Act as focal point for corrective actions by approving new actions and verifying action closure</li> <li>Facilitate root cause analysis of project nonconformities</li> <li>Capture client feedback and monitor resulting improvement actions</li> <li>Ensure the deployment of a robust criticality assessment process throughout projects</li> <li>Verify the inspection level of products/materials</li> <li>Quality input to project lessons learned</li> <li>Ensure the closure of Quality requirements for project close out</li> <li>Review and provide input into technical bid evaluations</li> <li>Review and approve necessary construction contractors, vendors and suppliers’ documentation including ITPs and procedures</li> <li>Conduct review of project technical queries and specification deviation requests</li> <li>Ensure adequate and competent inspection resources are available to the projects</li> <li>Establish contract inspection framework</li> <li>Assist with evaluation of materials suppliers, manufacturers, fabricators and NDE providers</li> <li>Establish appropriate call off arrangements with 3rd party inspection agencies</li> <li>Prepare inspection packages for inspectors</li> <li>Assign competent, qualified, and appropriately experienced inspectors to inspection assignments </li> <li>Coordinate vendors/suppliers’ product/material inspection activities</li> <li>Provide support to coordinate fabrication activities</li> <li>Review inspection outputs and highlight areas of concern</li> <li>Report non-conformances identified by inspectors</li> <li>Liaise with Discipline Engineers regarding inspection queries, deficiencies & punch list items</li> <li>Facilitate the recall, quarantine and replacement of defective products/materials</li> <li>Support the review of vendor mechanical catalogues & manufacturing records books as required</li> <li>Ensure upload of inspection reports and releases to document management system</li> <li>Regular reporting of inspection status</li> <li>Review and approve 3rd party inspection invoices</li> <li>Liaise with the Client Quality Representative as appropriate</li> <li>Ensure the closure of inspection requirements for project close out</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable? </strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><p><strong>Expected:</strong></p><br><ul> <li>Degree in Engineering (Mechanical background is desirable)</li> <li> Membership of CQI or country specific Industry body (desirable)</li> <li> Quality Auditor Qualification by recognised industry body (essential)</li> <li> Welding inspector certification preferably CSWIIP 3.1 or equivalent (desirable)</li> <li> NDE Level II qualification (desirable)</li></ul><p><strong>Minimum Experience:</strong></p><br><ul> <li>Minimum 15+ years Oil and Gas experience.</li> <li>Minimum 5 years in a QA role</li> <li>Previous Experience in a Lead or management position</li> <li>Exposure to Client Contracts desirably but not mandatory </li></ul><p><strong>Job-Specific Skills:</strong></p><br><ul> <li>Good planning and organisational skills</li> <li> Proficient in Microsoft Office </li> <li>High level of communication skills in both written and spoken format</li> <li>Analytical, Problems Solving skills and Systematic thinking</li> <li>Demonstrated ability to work independently with good initiative and interpersonal skills</li> <li>Demonstrated ability to successfully interface with key stakeholders</li> <li>Ability to work within multi-cultural and environments</li></ul> </div>
Receive email alerts for Factory Jobs jobs
You can cancel your email alert at anytime