Class B Drivers Jobs
212 Jobs Found
Save and set alert for similar positionsManage alerts
<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <p> <strong>Under general supervision:</strong> </p> <ul> <li>From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset.</li> <li>Establishes scope of work with site customer and site representative.</li> <li>Checks design documentation for adequacy to specific site conditions and agreed scope of work.</li> <li>Proposes engineering adjustments to site condition as required.</li> <li>Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion.</li> <li>Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice.</li> <li>Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter.</li> <li>Prepares periodic reports for upper management.</li> </ul> <p> </p> <p> <strong>Additional Role Responsibilities:</strong> </p> <p>(1). Supervises the activities of assigned personnel at BIN-UMAR &SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; <br>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; <br>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; <br>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; <br>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team; <br>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; <br>(7). Monitor and operate the SAP/CMMS system. <br>(8). Contribute and participate in successful completion of plant improvements; <br>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Manager in case of emergency. <br>(10). Control, minimize and monitor flare losses & waste generation. <br>(11). Coordinates with Royal commission and other outside party for flare losses & waste management. <br>(12). Identify team and individuals limitations and develop contingency plans to address any short fall. </p> <b>Qualifications</b> <p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields.</p> <p> </p> <p> <strong>Relevent experience is highliy desirable:</strong> <br> Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. <br> Recognized International Qualifications (NVQ, C&G, OPITO etc)<br> Valid Emergency Response competence<br> CMMS/SAP Experience <br> Coaching & Development Experience (Competence Assessors preferred) <br> Commissioning experience<br> Experience from similar challenging environments. (Wells experience a must for production operations personnel)<br> Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.)<br> Internationally recognized driving license<br> Good English skills, Arabic speaking advantageous<br> ISSOW/PTW experience <br> </p> <p>rience.</p><p><strong>Desired Candidate Profile</strong></p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields.<br><br><strong>Relevent experience is highliy desirable:</strong> <br> Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. <br> Recognized International Qualifications (NVQ, C&G, OPITO etc)<br> Valid Emergency Response competence<br> CMMS/SAP Experience <br> Coaching & Development Experience (Competence Assessors preferred) <br> Commissioning experience<br> Experience from similar challenging environments. (Wells experience a must for production operations personnel)<br> Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.)<br> Internationally recognized driving license<br> Good English skills, Arabic speaking advantageous<br> ISSOW/PTW experience <br>
<p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management.</p><p>Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. (10). Control, minimize and monitor flare losses & waste generation. (11). Coordinates with Royal commission and other outside party for flare losses & waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall.</p><p>Qualifications Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61006, Iraq Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience
<p>Demonstrates client etiquette, discipline and Control Risks low profile approach; Possesses up to date knowledge of threat and key issues in Iraq. Conducts Vehicle and Dismounted Contact and Immediate Action Drills. Possesses competent Navigation skills including map, compass and use of GPS. Competent in the use of all communications systems both vehicles mounted and hand held. Able to be fully conversant and comply with Rules of Engagement and Use of Force. Maintains competence in these skills through regular formal assessment. Conducts effective administration to include vehicle maintenance, equipment husbandry/accountability and reports and returns. Assists in the conduct of risk assessments and operational planning. Issues orders to team members and briefs clients in line with SOPs when required. Conducts venue and route recces and produces reports. Is able to command the team and issue direction to clients.</p><p><strong>Desired Candidate Profile</strong></p><p>Knowledge and experience Essential Minimum 12 months APT experience. Minimum 4 years military / police experience. Minimum 2 years commercial experience in Iraq. Fluent English speaker and writer. Preferred Experience managing operations for O&G clients. Experience managing local guard force. Experience working for Control Risks in Southern Iraq. Qualifications and specialist skills Non-native English speakers from countries where English is not the official language: proof (dated within the last two years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above. Valid SIA Frontline Close Protection Licence Valid Medical Qualifications (FREC, FPOSi)</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Overview ***This position is physically located in Balad, Iraq *** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under supervision of Electrical Supervisor, Installs, inspects, troubleshoots, repairs, operates, and maintains electrical systems and components of electrical power distribution and generating equipment. Performs operations and maintenance duties to maintain power to telecommunications equipment and maintains the facility’s physical electrical distribution system in good repair. Electrical work experience includes electrical installation in commercial and industrial categories. Electrician complies with National Electrical Code (NEC) 2008 for repairs and upgrades to existing construction, and NEC 2011 standards apply for new construction, contract specifications, and MIL Standards/Regulations. Electrician also complies with British Standards, BS 7671. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Installs, inspects, troubleshoots, repairs, operates, and maintains electrical systems and components of electrical power distribution and generating equipment. + Performs operations and maintenance duties to maintain power to telecommunications equipment, and maintains the facility’s physical electrical distribution system in good repair. + Electrical work experience includes electrical installation in commercial and industrial categories. + Electrician complies with National Electrical Code (NEC) 2008 for repairs and upgrades to existing construction, and NEC 2011 standards apply for new construction, contract specifications, and MIL Standards/Regulations. + Performs other duties as assigned. Qualifications + Minimum Qualifications: + Education/Certifications: + One-year related experience may be substituted for one year of education, if degree is required. + High School Diploma or equivalent. + Must be a U.S. Citizen + Must be able to obtain and maintain a host country driver's license. + Preferably with a Journeyman Electrician license or host nation equivalent. + Experience: + Minimum of seven (7) years of work experience in the electrical wiring industry, including experience in planning, laying out, and installing electrical distribution systems IAW the NEC & British Standard, BS 7671, and will have been under the direct supervision of a qualifying electrician for a licensed electrical contractor. + Skills + Thorough knowledge of Electrical Codes + Ability to manage multiple job sites and priorities + Ability to communicate, interact and work effectively and cooperatively with all people including those from diverse ethnic and educational backgrounds + Ability to recognize the importance of safety in the workplace, follow safety rules, practice safe work habits, utilize appropriate safety equipment and report unsafe conditions to the appropriate administrator + Must have basic computer skills + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>
<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p>Job Duties</p><p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management.</p><p>Additional Role Responsibilities:</p><ul><li>(1). Supervises the activities of assigned personnel at BIN-UMAR &SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position;</li><li>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized;</li><li>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations;</li><li>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators;</li><li>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team;</li><li>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs;</li><li>(7). Monitor and operate the SAP/CMMS system.</li><li>(8). Contribute and participate in successful completion of plant improvements;</li><li>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Manager in case of emergency.</li><li>(10). Control, minimize and monitor flare losses & waste generation.</li><li>(11). Coordinates with Royal commission and other outside party for flare losses & waste management.</li><li>(12). Identify team and individuals limitations and develop contingency plans to address any short fall.</li></ul><p>Qualifications</p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61006, Iraq</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><h4>Qualifications</h4>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience
<p>Identify and develop new business opportunities and establish relationships with potential customers across Iraq. Explore opportunities in new sectors and participate in relevant tenders and project bids. Lead commercial negotiations and secure new contracts in line with the company's business objectives. Build and maintain strong relationships with existing and prospective customers. Conduct regular customer visits to identify business needs, follow up on opportunities, and strengthen commercial relationships. Coordinate with internal teams to support project-related requirements and ensure effective follow-up on awarded contracts. Monitor market developments, customer requirements, and competitor activities to identify potential business opportunities. Prepare sales presentations, proposals, and other commercial documentation as required.</p><p><strong>Desired Candidate Profile</strong></p><h3>Requirements</h3>
<p>Education and Qualifications<br>Bachelor's or Master's degree in Engineering or a related technical field. Additional qualifications or training in sales, marketing, or business development are an advantage.</p>
<p>Experience<br>At least 5 years of relevant professional experience, including a minimum of 3 years in sales, business development, or a related commercial role. Experience in the security sector is an advantage, particularly in security systems, solutions, or project-based sales. Proven experience in customer acquisition, tender participation, commercial negotiations, and contract development.</p>
<p>Skills and Competencies<br>Strong sales, business development, and negotiation skills. Excellent communication, presentation, and interpersonal skills. Ability to identify business opportunities and develop effective customer relationships. Ability to learn new products, technologies, and industry requirements quickly. Strong organizational skills and the ability to manage multiple priorities, work under pressure, and meet deadlines. Fluency in both Arabic and English, with strong written and verbal communication skills. Good computer skills and proficiency in standard business applications and internet-based tools. Willingness and ability to travel extensively within Iraq and internationally when required. Valid driving licence and ability to drive.</p>
<p>Location u200b<br>Candidates must currently be based in Iraq and available to work in Baghdad.</p>
<p> <strong>Who We Are:</strong> </p> <p>Headquartered in Washington, DC, Versar Global Solutions provides full mission lifecycle solutions for challenges faced by our government and commercial Customers in the natural, built, and digital environments. With team members around the world and a rich legacy spanning more than 50 years, Versar Global Solutions delivers a broad array of planning, analysis and risk management solutions, project and program management, operations and maintenance services, and information technology applications for environmental management and remediation projects, mission critical facilities and installations, and in support of readiness and contingency operations.</p> <p> <strong>Who You Are:</strong> </p> <p>Seeking a full-time professional in Iraq supporting a Navigational Aids (NAVAIDS) Maintenance & Repair Support project. This position supports 24/7 aviation operations in a deployed environment and ensures safe, efficient, and compliant airfield operations while supporting mission-critical systems.</p> <p> <strong>What You ll Do:</strong> </p> <ul> <li>Maintain, inspect, troubleshoot, calibrate, repair, and certify NAVAIDS systems including ILS, VOR, TACAN, DME, NDB, airfield beacons, and associated communications interfaces.</li> <li>Perform preventive and corrective maintenance in accordance with FAA, ICAO, DoD, OEM, and contract requirements.</li> <li>Conduct diagnostics, performance testing, alignment, calibration, and fault isolation of NAVAIDS equipment and subsystems.</li> <li>Analyze technical data, schematics, wiring diagrams, and equipment manuals to identify and correct system deficiencies.</li> <li>Perform system commissioning, acceptance testing, and operational verification following maintenance activities.</li> <li>Monitor equipment performance and recommend repairs, upgrades, or replacement actions to maintain operational readiness.</li> <li>Maintain detailed maintenance records, inspection reports, calibration data, and configuration documentation.</li> <li>Coordinate maintenance activities with Airfield Management, Operations, ATC, and other stakeholders.</li> <li>Provide technical guidance and mentorship to junior technicians and assist with workforce training.</li> <li>Respond to emergency outages and restore critical NAVAIDS systems within required response timelines.</li> <li>Ensure compliance with electrical safety, Lockout/Tagout (LOTO), environmental, and quality control requirements.</li> <li>Support airfield operational readiness inspections and mission support activities.</li> </ul> <p> <strong>What You ll Bring:</strong> </p> <strong>Required Qualifications</strong> <ul> <li>Must be a US Citizen.</li> <li>Must have computer skills and be able to operate a variety of computer programs.</li> <li>Must be able to speak, read and write English fluently.</li> <li>Must maintain a valid driver's license from their home country with validity for 12 months from on-site employment date.</li> <li>Must maintain a valid passport from their home country with validity for 12 months from the wheels-up deployment date to the site. </li> <li>Must satisfy and maintain all medical screening requirements.</li> <li>Ability to perform essential job duties in a deployed environment.</li> </ul> Additional Required Qualifications <ul> <li>Associate degree, military technical training, or equivalent formal training in Avionics, Electronics, Communications, Electrical Systems, or related discipline.</li> <li>Minimum 8 years of experience maintaining and repairing NAVAIDS systems.</li> <li>Hands-on experience with ILS, VOR, TACAN, DME, NDB, airfield beacons, and related navigation systems.</li> <li>Technical certification in avionics, electronics, communications, or a related field.</li> <li>Demonstrated experience performing calibration, alignment, troubleshooting, and fault isolation of electronic navigation systems.</li> <li>Ability to read and interpret technical manuals, schematics, wiring diagrams, engineering drawings, and OEM documentation.</li> <li>Experience using electronic test equipment including multimeters, oscilloscopes, spectrum analyzers, signal generators, and related diagnostic tools.</li> <li>Experience supporting aviation, military airfield, FAA, ICAO, or DoD operations.</li> <li>Experience supervising or mentoring technicians preferred.</li> <li>Ability to work rotating shifts, weekends, holidays, and emergency call-outs as required.</li> </ul> <p> <strong>Compensation </strong> </p> <p>Versar Global Solutions provides the compensation range and general description of other compensation and benefits that the Company in good faith believes it might pay and/or offer for this position based on the successful applicant s education, experience, knowledge, skills, and abilities in addition to internal equity and geographic location. The Company reserves the right to ultimately pay more or less than the posted range and offer additional benefits and other compensation, depending on circumstances not related to an applicant s status protected by local, state, or federal law.</p> <p> <strong>Location Requirements</strong> </p> <p>The position is located in Balad, Iraq.</p> <p><br></p><p><strong>Desired Candidate Profile</strong></p><strong>Required Qualifications</strong> <ul> <li>Must be a US Citizen.</li> <li>Must have computer skills and be able to operate a variety of computer programs.</li> <li>Must be able to speak, read and write English fluently.</li> <li>Must maintain a valid driver's license from their home country with validity for 12 months from on-site employment date.</li> <li>Must maintain a valid passport from their home country with validity for 12 months from the wheels-up deployment date to the site. </li> <li>Must satisfy and maintain all medical screening requirements.</li> <li>Ability to perform essential job duties in a deployed environment.</li> </ul> Additional Required Qualifications <ul> <li>Associate degree, military technical training, or equivalent formal training in Avionics, Electronics, Communications, Electrical Systems, or related discipline.</li> <li>Minimum 8 years of experience maintaining and repairing NAVAIDS systems.</li> <li>Hands-on experience with ILS, VOR, TACAN, DME, NDB, airfield beacons, and related navigation systems.</li> <li>Technical certification in avionics, electronics, communications, or a related field.</li> <li>Demonstrated experience performing calibration, alignment, troubleshooting, and fault isolation of electronic navigation systems.</li> <li>Ability to read and interpret technical manuals, schematics, wiring diagrams, engineering drawings, and OEM documentation.</li> <li>Experience using electronic test equipment including multimeters, oscilloscopes, spectrum analyzers, signal generators, and related diagnostic tools.</li> <li>Experience supporting aviation, military airfield, FAA, ICAO, or DoD operations.</li> <li>Experience supervising or mentoring technicians preferred.</li> <li>Ability to work rotating shifts, weekends, holidays, and emergency call-outs as required.</li> </ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Overview This position is physically located in Balad, Iraq Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under supervision of the Welder, Lead, the Welder w elds metal components together to fabricate or repair products, such as machine parts, plant equipment, mobile homes, motors and generators, according to layouts, blueprints or work orders, using brazing and a variety of arc and gas welding equipment. Welds metal parts together, using both gas welding or brazing and any combination of arc welding processes, performs related tasks such as thermal cutting and grinding, repairs broken or cracked parts, fills holes and increases size of metal parts, positions and clamps together components of fabricated metal products preparatory to welding. May locate and repair cracks in industrial engine cylinder heads, using inspection equipment and gas torch, may perform repairs only and be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Welds metal components together to fabricate or repair products, such as machine parts, plant equipment, mobile homes, motors and generators, according to layouts, blueprints or work orders, using brazing and a variety of arc and gas welding equipment. + Welds metal parts together, using both gas welding or brazing and any combination of arc welding processes, performs related tasks such as thermal cutting and grinding, repairs broken or cracked parts, fills holes and increases size of metal parts, positions and clamps together components of fabricated metal products preparatory to welding. + May locate and repair cracks in industrial engine cylinder heads, using inspection equipment and gas torch, may perform repairs only and be required to pass employer performance tests or standard tests to meet certification standards of governmental agencies or professional and technical associations. Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + High school diploma or equivalent. Must provide a copy of the diploma. + A valid US driver’s license is required, and able to obtain Local Driver’s License. + Must have valid US Passport. + Must be US citizen. + Experience: + Minimum of three (3) years of experience in various types of welding and the use of welding tools or equivalent combination of education and experience. + Licenses/Certifications: Must be a certified welder. + Skills: + Must be able to pass & maintain AWS Welding Code Certifications as required. + Strong interpersonal and negotiation skills. + Collaborative work style fostering cooperation and teamwork. + Ability to work effectively with employees and management of all levels to include multi-national staff, superiors, and ranking military officers. + Ability to handle confidential company and employee information with complete discretion. + Intermediate ability to communicate in English, both verbally and written. + Basic proficiency in Word, Excel, and Outlook applications. + High-level organization and planning skills so workflow is managed efficiently and accurately. + Ability to read, analyzes, and interprets reports and documents. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>
<p><h4>Responsibilities</h4>
<p>The Air Crew Life Support Technician performs inspections, maintenance, and troubleshooting tasks on T-6A aircraft.</p>
<ul>
<li>Perform launch, recovery, scheduled, and unscheduled inspections and maintenance.</li>
<li>Perform preflight, through-flight, and BPO inspections; ground handling; minor maintenance; and servicing.</li>
<li>Perform routine troubleshooting, installation, repair, and maintenance of aircraft electromechanical systems and components at the organizational level of maintenance.</li>
<li>Service aircraft and perform end-of-runway, post-flight, preflight, through-flight, and phase inspections.</li>
<li>Troubleshoot and maintain aircraft structures, systems, components, and related equipment. Remove and install aircraft components.</li>
<li>Perform scheduled and unscheduled maintenance and inspections on company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals, and procedures.</li>
<li>Service, operate, and maintain ground support equipment. Clean aircraft interiors and exteriors and work areas.</li>
<li>Complete all maintenance documentation accurately.</li>
<li>Perform other position-related duties as assigned or requested.</li>
</ul>
<h4>Minimum position knowledge, skills, and abilities required</h4>
<ul>
<li>At least four years of directly related heavy aircraft maintenance experience is highly desired. Experience must include following applicable aircraft servicing procedures, maintenance manuals, and parts catalogs.</li>
<li>Experience with OBOGS systems and T-6 life support is required.</li>
<li>Read, interpret, and use manufacturer and aircraft maintenance manuals, service bulletins, blueprints, wiring and schematic diagrams, data tables, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.</li>
<li>Inspect, repair, and operate ground support and auxiliary equipment.</li>
<li>Possess a current state-issued driver’s license.</li>
<li>Be able to obtain and maintain a U.S. passport for facility credentials and authorization. U.S. citizenship is required for facility credentials and authorization at this work site.</li>
</ul>
<h4>Work environment, physical demands, and mental demands</h4>
<ul>
<li>Carry and lift up to 50 pounds overhead.</li>
<li>Walk, climb, stand, stoop, stretch, and squat to move equipment, board and deboard aircraft, perform maintenance using ladders, and work atop and below aircraft.</li>
<li>Work at high altitudes when performing flight attendant duties.</li>
<li>Work primarily outdoors in a high-noise environment.</li>
<li>Perform maintenance in low-light areas and operate support equipment after daylight hours. Work occasionally in inclement weather.</li>
</ul></p><p></p>
<ul><li><p>The Deputy Manager - Administration will be responsible for managing general administration activities effectively and maintain records of day-to-day operations. Additionally, this role involves undertaking the responsibility of sourcing, procuring, and managing office supplies, facilities, and amenities.</p></li></ul><br><p><strong>Job Description</strong> </p><ul><li><p>Manage day-to-day administration and ensure cost control for regular expenses. </p></li></ul><ul><li><p>Maintain furniture, fixtures, and other office equipment. </p></li></ul><ul><li><p>Represent the admin team in audits. </p></li></ul><ul><li><p>Maintain all communication equipment including Video Conferencing, telephones, mobiles, telephone lines etc. </p></li></ul><ul><li><p>Ensure implementation of contracts negotiated with service providers. </p></li></ul><ul><li><p>Provide stationery, food, corporate gifts, etc. as per requirement by Business Units/ Management. </p></li></ul><ul><li><p>Maintain records of bills and ensure timely payment. </p></li></ul><ul><li><p>Process bills for payments and maintain receipts of invoices. </p></li></ul><ul><li><p>Process material management payments through SAP. </p></li></ul><ul><li><p>Ensure compliance to VFAR while processing invoices for payments and to purchase policy. </p></li></ul><ul><li><p>Manage petty cash requirements. </p></li></ul><ul><li><p>Co-ordinate with employees, housekeepers, vendors etc. for procurement, repair & maintenance of day-to-day office facilities. </p></li></ul><ul><li><p>Ensure proper book keeping of reports, audits reports and documents. </p></li></ul><ul><li><p>Ensure compliance with ISO 14001 and maintain premises to preserve the environment. </p></li></ul><ul><li><p>Ensure adherence to code of conduct and ensure process implementation as per VFS Administration SOP /manuals. </p></li></ul><ul><li><p>Ensure compliance with VFS' Global’ s information security policies and procedures. </p></li></ul><ul><li><p>Ensure compliance of shops and license certifications and timely renewal of vendor contracts for all VAC's. </p></li></ul><ul><li><p>Respond to inquiries, troubleshoot, and ensure internal customer satisfaction. </p></li></ul><ul><li><p>Ensure timely renewal of maintenance contracts. </p></li></ul><ul><li><p>Manage handover of premises on expiry of lease and takeover of premise. </p></li></ul><ul><li><p>Assist in the sale of old company cars and other assets. </p></li></ul><ul><li><p>Assist and supervise refurbishment projects. </p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong> Education</strong> </p><ul><li><p>Graduate/ Postgraduate degree or global equivalent in Business Administration or another related field. </p></li></ul><p><br></p><p><strong>Experience</strong> </p><ul><li><p>3-7 years of relevant experience in a administrative role.</p></li></ul>
<p>As a Medical Doctor supporting the Emergency Room, you'll provide onsite medical care primarily for local national employees, evaluating and triaging patients, diagnosing illness and injury, treating acute and chronic conditions, and coordinating follow-up care. You'll also support employee medical evaluations, testing and immunizations, maintain accurate medical records, and help stabilize and coordinate care for patients who require a higher level of medical services.</p>
<h3>Key Responsibilities</h3>
<ul>
<li>Evaluate and triage patients, diagnose illness and injury, and provide treatment for acute and chronic conditions.</li>
<li>Develop treatment plans; prescribe and administer medications, treatments, and therapies; manage the site formulary; order, perform, and interpret testing and analyze relevant records and reports.</li>
<li>Provide follow-up care and maintain accurate patient health information, histories, and medical records.</li>
<li>Conduct employee medical evaluations, including annual physicals, medical testing, and required immunizations, and ensure applicable U.S. and host-country medical-clearance requirements are met.</li>
<li>Stabilize patients requiring higher-level care and coordinate medical evacuation, referral, and patient handover with external medical resources when needed.</li>
<li>Collaborate with medical staff to support continuity of care, clinical mentoring, established clinical guidelines and procedures, and mass-casualty exercises.</li>
</ul><p><strong>Desired Candidate Profile</strong></p><p>Requirements Graduate of an accredited Iraqi medical school or international equivalent school. Current license or certification required to practice medicine in Iraq. Minimum of three years of experience as a physician. Current direct patient-care experience, including at least six months of work in the field during the past 12 months. Fluent in both English and Arabic, verbally and in writing. Current Basic Life Support (BLS) and Advanced Cardiac Life Support (ACLS) certifications. Proficiency with information technology, including electronic medical record systems. Ability to work independently, manage competing priorities, and remain composed in stressful situations. Ability to obtain medical clearance and maintain current required immunizations. Valid passport from your country of record before relocation and throughout your time in Balad. Ability to push, pull, or carry a minimum of 50 lbs.</p>
<p>Preferred Experience supporting healthcare services in a military or government-operated environment.</p>
<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><h3>Key Responsibilities</h3><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Requirements Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent. At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year. Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent. Current ARRT CT certification/registration, or applicable country-of-record equivalent. Current BLS certification or approved equivalent. Proficiency with electronic medical records and Microsoft Office applications. Ability to read, write, and speak English effectively. Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project. Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</p><p>Preferred Prior experience supporting military, government, or international healthcare environments. Current applicable security clearance.</p>
<p>Administer and maintain VMware vSphere environments (vCenter, ESXi hosts, clusters, HA/DRS/vMotion, datastores, and VMs), including performance and capacity monitoring. Manage enterprise SAN storage and Fibre Channel connectivity, including LUN provisioning, host mappings, zoning, multipathing, and storage troubleshooting. Administer backup and recovery infrastructure, including Veeam Backup & Replication, HPE StoreOnce, and HPE MSL tape libraries; perform backup verification, restores, offsite procedures, and disaster recovery testing. Administer Windows Server environments, including Active Directory, DNS, DHCP, Group Policy, domain controllers, and Windows Server Failover Clustering. Administer Red Hat Enterprise Linux and other Linux servers, including services, networking, storage, patching, and troubleshooting. Monitor infrastructure health and performance using SolarWinds and Veeam ONE; investigate alerts and production incidents and perform root-cause analysis. Perform server provisioning, patching, upgrades, migrations, and decommissioning across production, UAT, development, and DR environments. Maintain infrastructure security in line with company policies and least-privilege principles, and support server and endpoint security solutions. Follow change management procedures, maintain technical documentation and infrastructure inventory, and coordinate with internal teams and vendors on incidents and technology refresh projects. Administer Microsoft 365 and Google Workspace, including user onboarding/offboarding, licensing, mailbox management, and security settings. Manage Duo multi-factor authentication for users, including enrollment, policy configuration, and access troubleshooting.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Computer Science, IT, or equivalent practical experience. Years of Experience: 3 Minimum 2 years of hands-on experience administering Windows Server environments, including Active Directory (AD DS), DNS, DHCP, NTP, Group Policy, and LDAP. Solid experience with physical servers, hardware, and storage systems (SAN/NAS), including RAID, firmware updates, and basic data center operations. Proven experience managing backup and recovery solutions such as Veeam, including backup and restore of files, databases, and virtual machines. Experience administering Microsoft 365 , Cisco Duo, and Google Workspace (user and license management, mail, and security policies). Hands-on experience with virtualization platforms, primarily VMware vSphere/ESXi (VM provisioning, snapshots, vCenter management). Working knowledge of networking fundamentals (TCP/IP, VLANs, firewalls, VPN) and basic Linux administration.</p>
<p><h4>Essential responsibilities:</h4>
<p>Remove/install canopies, ejection seats.<br>
Perform periodic maintenance of all cockpit egress and life support systems of moderate difficulty, such as seats, canopies, CADs, heating/cooling systems.<br>
Inspect and operate powered and nonpowered aerospace ground equipment.<br>
Review maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.<br>
Maintain aircraft support equipment and orderly workspace.<br>
Interpret maintenance instruction manuals, maintenance requirement cards, work from related schematics, diagrams, drawings, technical directives, maintenance/servicing instructions and operational written procedures and company directives to perform maintenance.<br>
Install and remove cartridge actuated devices.<br>
Perform inspections and maintenance of aircraft air conditioning systems, fire warning/extinguishing systems.<br>
Identify and treat corrosion.<br>
Operate, maintain, troubleshoot, remove and replace associated parts and components on a variety of systems, such as aircraft, cabin environmental and pressurization systems, equipment cooling, liquid/gaseous and OBOGS oxygen systems.<br>
Perform related duties in hazardous areas such as oxygen system, engine fire extinguishing systems including the removal and replacement of cartridge-actuated devices.<br>
Maintain foreign object damage (FOD), hazardous waste, and tool control programs.<br>
Adhere to all applicable Amentum policies and procedures.<br>
Perform all other position related duties as assigned or requested.</p>
<h4>Minimum qualifications:</h4>
<ul>
<li>High school graduate or equivalent.</li>
<li>Must have completed Egress Course.</li>
<li>Must have an FAA Airframe and Powerplant (A&P) License.</li>
<li>Shall have completed and be able to document the appropriate T/M required/series preferred Navy Egress class.</li>
<li>Must have five (5) years of applicable aircraft maintenance support experience.</li>
<li>Three (3) or more years of T6 aircraft experience.</li>
<li>Must have experience and thorough working knowledge in corrosion detection, treatment, and prevention.</li>
<li>Shall be qualified according to their field of expertise and the level of maintenance assigned.</li>
<li>Must be a U.S. citizen.</li>
<li>Possess a high degree of expertise of aircraft systems.</li>
<li>Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions and special tools and test equipment.</li>
<li>Must be familiar with operational capabilities and limitations of aircraft systems.</li>
<li>Must be customer oriented.</li>
</ul></p><p></p>
<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><p>Key Responsibilities</p><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent.</li><li>At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year.</li><li>Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent.</li><li>Current ARRT CT certification/registration, or applicable country-of-record equivalent.</li><li>Current BLS certification or approved equivalent.</li><li>Proficiency with electronic medical records and Microsoft Office applications.</li><li>Ability to read, write, and speak English effectively.</li><li>Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project.</li><li>Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</li></ul><p>Preferred</p><ul><li>Prior experience supporting military, government, or international healthcare environments.</li><li>Current applicable security clearance.</li></ul>
<b>Job Description </b><div> <p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p> <p> <strong>Job Location: </strong>Iraq</p> <p> <strong>Assignment Details: </strong>This is a full-time, fixed-term role of up to 12 months. Separate shorter term opportunities are also available. Housing, meals, and project-related airfare are company-paid.</p> <p><strong><br></strong></p><p> <strong>Key Responsibilities</strong> </p> <ul> <li>Perform ordered diagnostic X-ray and CT examinations.</li> <li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li> <li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li> <li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li> <li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li> <li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul></div><p><strong>Desired Candidate Profile</strong></p><br><div> <p> <strong>Requirements</strong> </p> <ul> <li>Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent.</li> <li>At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year.</li> <li>Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent.</li> <li>Current ARRT CT certification/registration, or applicable country-of-record equivalent.</li> <li>Current BLS certification or approved equivalent.</li> <li>Proficiency with electronic medical records and Microsoft Office applications.</li> <li>Ability to read, write, and speak English effectively.</li> <li>Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project.</li> <li>Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</li> </ul> <p> <strong>Preferred</strong> </p> <ul> <li>Prior experience supporting military, government, or international healthcare environments.</li> <li>Current applicable security clearance.</li></ul></div>
<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p> <p> <strong>Job Location: </strong>Iraq</p> <p> <strong>Assignment Details: </strong>This is a full-time, fixed-term role of up to 12 months. Separate shorter term opportunities are also available. Housing, meals, and project-related airfare are company-paid.</p> <p><strong><br></strong></p><p> <strong>Key Responsibilities</strong> </p> <ul> <li>Perform ordered diagnostic X-ray and CT examinations.</li> <li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li> <li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li> <li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li> <li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li> <li>Participate in required mass-casualty exercises and organizational compliance education.Company Description</li></ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>Requirements</strong> </p> <ul> <li>Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent.</li> <li>At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year.</li> <li>Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent.</li> <li>Current ARRT CT certification/registration, or applicable country-of-record equivalent.</li> <li>Current BLS certification or approved equivalent.</li> <li>Proficiency with electronic medical records and Microsoft Office applications.</li> <li>Ability to read, write, and speak English effectively.</li> <li>Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project.</li> <li>Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</li> </ul> <p> <strong>Preferred</strong> </p> <ul> <li>Prior experience supporting military, government, or international healthcare environments.</li> <li>Current applicable security clearance.</li></ul>
<p><h4>Essential responsibilities:</h4>
<p>The aircraft mechanic II - egress performs organizational, intermediate and limited depot level maintenance to include inspection, operational test, repair, modification and troubleshooting on all assigned aircraft, components and equipment.</p>
<ul>
<li>Remove/install canopies, ejection seats</li>
<li>Perform periodic maintenance of all cockpit egress and life support systems of moderate difficulty, such as seats, canopies, CADs, heating/cooling systems</li>
<li>Inspects and operates powered and nonpowered aerospace ground equipment</li>
<li>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation</li>
<li>Maintain aircraft support equipment and orderly workspace</li>
<li>Interpret maintenance instruction manuals, maintenance requirement cards, work from related schematics, diagrams, drawings, technical directives, maintenance/servicing instructions and operational written procedures and company directives to perform maintenance</li>
<li>Install and remove cartridge actuated devices</li>
<li>Performs inspections and maintenance of aircraft air conditioning systems, fire warning/extinguishing systems</li>
<li>Identifies and treats corrosion</li>
<li>Operates, maintains, troubleshoots, removes and replaces associated parts and components on a variety of systems, such as aircraft, cabin environmental and pressurization systems, equipment cooling, liquid/gaseous and OBOGS oxygen systems</li>
<li>Perform related duties in hazardous areas such as oxygen system, engine fire extinguishing systems including the removal and replacement of cartridge-actuated devices</li>
<li>Maintains foreign object damage (FOD), hazardous waste, and tool control programs</li>
<li>Shall adhere to all applicable Amentum policies and procedures</li>
<li>Perform all other position related duties as assigned or requested</li>
</ul>
<h4>Minimum qualifications:</h4>
<ul>
<li>High school graduate or equivalent</li>
<li>Must have completed egress course</li>
<li>Must have an FAA airframe and powerplant (A&P) license</li>
<li>Shall have completed and be able to document the appropriate T/M required/series preferred Navy egress class</li>
<li>Must have five (5) years of applicable aircraft maintenance support experience</li>
<li>Three (3) or more years of T6 aircraft experience</li>
<li>Must have experience and thorough working knowledge in corrosion detection, treatment, and prevention</li>
<li>Shall be qualified according to their field of expertise and the level of maintenance assigned</li>
<li>Possess a high degree of expertise of aircraft systems</li>
<li>Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions and special tools and test equipment</li>
<li>Must be familiar with operational capabilities and limitations of aircraft systems</li>
<li>Must be customer oriented</li>
</ul></p><p></p>
<p>The Aircraft Mechanic II - Egress performs organizational, intermediate and limited depot level maintenance to include inspection, operational test, repair, modification and troubleshooting on all assigned aircraft, components and equipment. Essential Responsibilities:</p><ul><li>Remove/install canopies, ejection seats</li><li>Perform periodic maintenance of all cockpit egress and life support systems of moderate difficulty, such as seats, canopies, CADs, heating/cooling systems</li><li>Inspects and operates powered and nonpowered aerospace ground equipment.</li><li>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li><li>Maintain aircraft support equipment and orderly workspace.</li><li>Interpret Maintenance Instruction Manuals, maintenance requirement cards, work from related schematics, diagrams, drawings, technical directives, maintenance/servicing instructions and operational written procedures and Company directives to perform maintenance.</li><li>Install and remove cartridge actuated devices.</li><li>Performs inspections and maintenance of aircraft air conditioning systems, fire warning/extinguishing systems.</li><li>Identifies and treats corrosion.</li><li>Operates, maintains, troubleshoots, removes and replaces associated parts and components on a variety of systems, such as aircraft, cabin environmental and pressurization systems, equipment cooling, liquid/gaseous and OBOGS oxygen systems.</li><li>Perform related duties in hazardous areas such as oxygen system, engine fire extinguishing systems including the removal and replacement of cartridge-actuated devices.</li><li>Maintains foreign object damage (FOD), hazardous waste, and tool control programs.</li><li>Shall adhere to all applicable Amentum policies and procedures.</li><li>Perform all other position related duties as assigned or requested.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High School graduate or equivalent</li><li>Must have completed Egress Course.</li><li>Must have an FAA Airframe and Powerplant (A&P) License.</li><li>Shall have completed and be able to document the appropriate T/M required/ series preferred Navy Egress class</li><li>Must have Five (5) years of applicable aircraft maintenance support experience.</li><li>Three (3) or more years of T6 aircraft experience.</li><li>Must have experience and thorough working knowledge in corrosion detection, treatment, and prevention.</li><li>Shall be qualified according to their field of expertise and the level of maintenance assigned.</li><li>Possess a high degree of expertise of aircraft systems</li><li>Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions and special tools and test equipment.</li><li>Must be familiar with operational capabilities and limitations of aircraft systems.</li><li>Must be customer oriented.</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span> We’re Hiring: Corporate Accountant | Remote Are you an experienced finance professional with strong corporate accounting expertise and a sharp eye for accuracy, reporting, and financial performance?<br> We are looking for a Corporate Accountant to join our team remotely, supporting multiple group entities — KOA, KAMS, and Proplab — across real estate and community management operations.<br> Key Responsibilities Manage end-to-end financial reporting and ensure timely month-end closing Prepare accurate financial reports and management packs for senior leadership and the Board Lead budgeting, forecasting, and cash flow planning with a strong focus on accuracy Oversee accounts receivable, collections, and working capital management Manage multi-entity accounting, consolidation, and reporting Coordinate with external auditors and ensure compliance with IFRS and applicable accounting standards Develop financial dashboards and performance reports to monitor business health and key trends Provide financial analysis and insights to support business and operational decision-making Ensure strong financial controls, data accuracy, and timely reporting across entities Core Competencies We Value Strong corporate accounting and financial reporting experience Excellent financial analysis and business partnering skills Strong expertise in budgeting, forecasting, and financial modelling Solid knowledge of IFRS and corporate reporting standards Excellent cash flow and working capital management skills Advanced Excel proficiency; Power BI experience is a strong advantage Confident communication and presentation skills, including presenting to senior leadership Proven experience managing accounting and finance processes across multiple entities Strong attention to detail, ownership, and ability to work independently in a remote environment Work Arrangement Fully Remote | Full-Time If you have strong corporate accounting experience and are looking for an opportunity to work with a growing international group, we’d love to hear from you.<br> Apply now and join our team!<br> Bachelor’s degree in Accounting, Finance, or related discipline.<br> At least 3 years of corporate accounting experience, preferably in property management or real estate.<br> In-depth knowledge of IFRS and UAE tax regulations.<br> Proficiency in accounting software (QuickBooks, SAP, or equivalent) and advanced MS Excel skills.<br> Strong analytical and organizational capabilities.<br> Excellent English communication skills.<br> Ability to work independently and handle multiple tasks.<br> Must have a driving license</span> </div>
Receive email alerts for Class B Drivers Jobs jobs
You can cancel your email alert at anytime