Factory Jobs
1445 Jobs Found
Save and set alert for similar positionsManage alerts
<p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management. Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. (10). Control, minimize and monitor flare losses & waste generation. (11). Coordinates with Royal commission and other outside party for flare losses & waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. Recognized International Qualifications (NVQ, C&G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching & Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR's, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for a Process Engineer to join its Iraq business unit focusing on executing process engineering activities in accordance with applicable HSEQ requirements, project procedures, regulatory requirements, industry codes, and engineering standards. This role is a full-time on-site role in Basra, Iraq with travel requirement. <br><strong>Reports to:</strong> Lead Process Engineer</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Process Engineer to join its Iraq business unit focusing on executing process engineering activities in accordance with applicable HSEQ requirements, project procedures, regulatory requirements, industry codes, and engineering standards. This role is a full-time on-site role in Basra, Iraq with travel requirement. <br><strong>Reports to:</strong> Lead Process Engineer</p><br><p><i><strong>#Wood #Iraq #Basra #Process Engineer </strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Process Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects </strong></p><br><p><strong>Designing the future. Transforming the world. </strong></p><br><p>Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering & Design Services. The Vision of this Contract is to enhance the production & assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery & Replacement/upgrade of obsolete equipment, piping & systems.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li><strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones </li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p>As a Process Engineer, you will support the delivery of process engineering activities throughout the project lifecycle. You will: </p><br><ul> <li>Execute process engineering activities in accordance with applicable HSEQ requirements, project procedures, regulatory requirements, industry codes, and engineering standards. </li> <li>Prepare and review key process engineering deliverables, including design basis documents, BFDs, PFDs, P&IDs, heat and material balances, process simulations, process datasheets, equipment and line lists, process descriptions, and control and safeguarding philosophies. </li> <li>Perform process calculations, equipment sizing, hydraulic assessments, relief and depressurization studies, facility capacity evaluations, and other technical assessments required by the project scope. </li> <li>Participate in site visits, facility walkdowns, field data collection, and as-built verification activities to confirm existing facility conditions and obtain the information required for engineering studies and project execution.</li> <li>Identify discrepancies between existing field conditions and available engineering documentation and support the preparation and updating of accurate as-built process documents. </li> <li>Identify and implement improvement to plant facilities, processes, methods of operations and turnaround, troubleshoot for process and equipment problems to minimize safety and quality risk as well as to ensure greater operational efficiency. </li> <li>Participate in design reviews, HAZOPs, and other process safety and technical assessments </li> <li>Ensure deliverables are prepared and checked in accordance with applicable standards and project requirements </li> <li>Work collaboratively with multidisciplinary teams, including piping, mechanical, and instrumentation engineers</li> <li>Interface with clients, facility operators, vendors, contractors, and other stakeholders as required.</li></ul><p><strong>Executes Assigned Scopes of Work: </strong></p><br><ul> <li>Establishes detailed designs and performance specifications to fulfill the requirements of assigned general specifications for components, systems, processes, etc. </li> <li>Plans and carries out successive steps and handles problems with general guidance from instructions, policies and precedents </li> <li>Responsible for meeting discipline cost and schedule requirements in production of dliverables, coordinates own work schedule, and prepares progress reports. </li> <li>Prepares process calculations, simulations, PFDs, P&IDs, datasheets, specifications, reports, technical requisitions, and other process engineering deliverables. </li> <li>Performs process studies, equipment sizing, hydraulic calculations, facility capacity assessments, and evaluation of existing process systems. </li> <li>Participates in site surveys, facility walkdowns, field data collection, as-built verification, and preparation of site survey reports where required. </li> <li>Identifies discrepancies between site conditions and existing engineering documentation and supports the updating of as-built documents. </li> <li>Interprets specifications and investigates difficulties </li> <li>Reviews vendor documents </li> <li>Active participation in design reviews</li></ul><p><strong>Process Design and Engineering Studies:</strong> </p><br><ul> <li>Prepare and review BFDs, PFDs, P&IDs, utility flow diagrams, heat and material balances, equipment lists, line lists, and process datasheets. </li> <li>Prepare process design basis documents, process descriptions, operating philosophies, control philosophies, safeguarding philosophies, and shutdown philosophies. </li> <li>Perform steady-state process simulations and other simulations as required by the project scope. </li> <li>Undertake equipment and system sizing calculations for separators, vessels, tanks, columns, heat exchangers, pumps, compressors, control valves, restriction orifices, relief devices, and other process equipment, as applicable.</li> <li>Perform hydraulic calculations for process piping, pipelines, flowlines, utility systems, relief systems, and flare systems, where applicable. </li> <li>Evaluate the adequacy and capacity of existing process equipment and systems against revised production profiles, fluid properties, operating conditions, and project requirements. </li> <li>Compare engineering alternatives based on process safety, technical performance, operability, maintainability, constructability, cost, schedule, and impact on existing operations. </li> <li>Document the basis, assumptions, calculation methods, limitations, and conclusions of engineering assessments.</li></ul><p><strong>Providing discipline expertise: </strong></p><br><ul> <li>Conducts problem solving in the area of expertise: problems involve new concepts and new and varied problems to be solved that demand technical expertise, investigation and interpretation </li> <li>Develops alternative solutions, identifies risks and benefits </li> <li>Develops solutions to non-recurring problems by appraising, interpreting and evaluating various precedents and data. </li> <li>Exercises professional judgement in selecting and interpreting information and modifying standard methods and procedures </li> <li>In consultancy business areas, may deliver small-scale projects with responsibility for cost, schedule, resource allocation and risk, while working within an established program management plan. </li> <li>Provide technical input and support to proposals as required </li> <li>Provides process engineering support for facility performance, operational troubleshooting, process safety, and plant improvement activities. </li> <li>Coordinates with other engineering disciplines, operations personnel, clients, contractors, and vendors to resolve technical issues.</li></ul><p><strong>Working Relationships:</strong></p><br><p><strong>Internal: </strong></p><br><ul> <li>Establish and maintain effective working relationships and communicate across the project / contract interfaces.</li> <li>Engage with inter-discipline community and promote discipline including: networking / knowledge sharing.</li> <li>Coordinates work efforts and solves technical problems with cooperative individuals </li> <li>Shares opinions, ideas and resources with others to achieve common goals, fosters teamwork and collaboration, builds trust </li></ul><p><strong>External: </strong></p><br><ul> <li>Establishing and / or maintaining an awareness of external stakeholders including: industry bodies, </li> <li>Academia, vendors, client interface (as appropriate and requested). </li> <li>Builds external relationships, with emphasis on those that facilitate the achievement of job accountabilities, such as relationships with key suppliers, customers and internal/external service providers or contractors</li></ul><p><strong>Level of Influence and Decision-Making Authority:</strong></p><br><ul> <li>Actions and decisions typically have a significant influence on the technical results of the project or department.</li> <li>Works independently on most aspects of work </li> <li>Works under general supervision: work is assigned in terms of specific objectives and guidelines and is checked for technical accuracy; broad instructions covering generally what needs to be done, limitations, quality and quantity expected, deadlines and priorities are given </li> <li>Additional, specific instructions are given for new, difficult or unusual assignments </li> <li>Unusual matters are refered to more senior authority </li> <li>No direct reports, but frequently serves as a technical resource. </li> <li>May guide and supervise a work group consisting of technical and support staff; looks to supervisor for substantial coaching on people management issues </li> <li>Responsible for meeting own targets which will impact the discipline</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable? </strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><p><strong>Expected:</strong></p><br><ul> <li>ISCED Level 6 Bachelors (minimum) or Level 7 Masters (preferred) Degree in Chemical Engineering or an equivalent relevant engineering discipline.</li></ul><p><strong>Knowledge, Skills and Experience</strong> </p><br><ul> <li>Typically requires more than five years of progressively responsible process engineering experience, preferably within the oil and gas energy. </li> <li>Demonstrates practical experience in process design, engineering studies, brownfield modifications, facility assessments, and support to existing operating facilities. </li> <li>Competent in preparing and reviewing process engineering deliverables, including BFDs, PFDs, P&IDs, heat and material balances, process datasheets, equipment sizing calculations, technical reports, and specifications. </li> <li>Able to perform process simulations, hydraulic calculations, facility capacity assessments, and process optimization activities. </li> <li>Experienced in site surveys, facility walkdowns, field data collection, as-built verification, and identification of discrepancies between site conditions and engineering documentation. </li> <li>Proficient in Aspen HYSYS and experienced in the use of PIPENET and Aspen Flare System Analyzer (FlareNet), as applicable to the assigned scope. </li> <li>Proficient in the use of relevant engineering calculation templates and Microsoft Office applications, particularly Excel, Word, and PowerPoint. </li> <li>Able to understand and interpret technical information, engineering drawings, specifications, datasheets, operating data, and vendor documentation. </li> <li>Working knowledge of applicable industry codes, standards, engineering procedures, HSEQ requirements, and project specifications. </li> <li>Experience in process safety activities, including participation in HAZID, HAZOP, LOPA, SIL, and Management of Change reviews, as applicable. </li> <li>Able to coordinate effectively with other engineering disciplines, operations personnel, clients, vendors, and contractors. </li> <li>Maintains awareness of relevant industry practices, technical developments, and emerging process engineering technologies.</li> <li>Good command of written and spoken English, with the ability to prepare clear technical reports and communicate effectively with multidisciplinary teams, clients, and vendors. </li></ul><p><strong>Personal attributes:</strong> </p><br><ul> <li>Able to communicate clearly verbally and in written form </li> <li>Good interpersonal and team working skills, builds positive relationships with supervisors, subordinates, peers and clients </li> <li>Enthusiastic, conscientious and committed to continuous professional development </li> <li>High level of awareness and commitment to safety in all aspects of daily work. </li> <li>Strong organizational skills and attention to detail. </li> <li>Highly motivated and demonstrates personal initiative. </li> <li>Possesses integrity, strong work ethic, positive attitude, and is dependable. </li> <li>Adaptable and flexible to the changing needs of projects and assignments. </li> <li>Prepared to take on new tasks and learn new technical subjects and skills. </li> <li>Continuously develops own knowledge and abilities.</li></ul> </div>
<p>We are looking for a Senior Welding Engineer for one of our clients with the following details:
Location: Basrah, Iraq
Start Date: Nov 2026
Contract Duration: 12 months, renewable
Work Scheme: Rotational 28 days ON and 28 days OFF</p><br><p><u>Missions & Activities</u></p><ul><li><p>Act as the Company Welding Subject Matter Expert (SME) for all welding-related activities within the NWP package.</p></li><li><p>Manage the review and approval process of critical welding deliverables including Welding Execution Plans, WPS, WPQR/PQR, repair procedures and welding consumable specifications.</p></li><li><p>Witness and validate Welding Procedure Qualification Tests (WPQT), welding trials and associated mechanical testing programs.</p></li><li><p>Provide technical support and expertise for complex welding issues including dissimilar materials, production repairs, automatic welding, tie-ins and fitness-for-service assessments.</p></li><li><p>Manage the Interface with COMPANY specialists, EPC Contractor and Vendors to ensure consistency of welding practices and compliance with Project integrity requirements.</p></li><li><p>Participate in technical evaluations, audits and contractor performance assessments as Company welding authority.</p></li><li><p>Ensure that all welding activities related to pipelines, flowlines, piping and structures are performed in compliance with Project Specifications, approved procedures, applicable codes and COMPANY requirements.</p></li><li><p>Review and validate WPS, PQR and welders’ qualifications and ensure proper implementation during construction activities.</p></li><li><p>Monitor and assess welding execution on site, including fit-up, welding parameters, consumables, heat input and workmanship.</p></li><li><p>Coordinate closely with Construction, QC, NDE and Contractor teams to ensure welding activities are executed safely and in line with approved ITPs.</p></li><li><p>Support qualification, audit, testing and inspection activities at fabrication yards and construction sites.</p></li><li><p>Review and support resolution of welding-related Technical Queries, Deviation Requests and Non-Conformance Reports.</p></li><li><p>Assess contractor welding performance, identify trends, productivity or quality issues, and propose corrective or improvement actions.</p></li><li><p>Ensure proper welding documentation, traceability and records are maintained for inclusion in the Project Quality Dossier.</p></li><li><p>Ensure strict compliance with H3SE requirements during all welding activities and promote safe working practices on site.</p></li><li><p>Provide regular reporting to the NWP Quality Superintendent on welding performance, issues and risks.</p></li></ul><p><strong>Desired Candidate Profile</strong></p><p><u>Qualification and Experience Required:</u></p><ul><li><p>Professional Experience (years): Minimum 20 years of experience in Oil & Gas projects</p></li><li><p>Experience in similar position (years): At least 15 years dedicated to welding engineering, fabrication and construction activities.</p></li><li><p>Extensive experience with major EPC and international projects involving pipelines, flowlines, pressure piping and structural fabrication.</p></li><li><p>Extensive experience in automatic pipeline welding processes, mechanized GTAW/GMAW systems and associated qualification programs.</p></li><li><p>Strong expertise in welding metallurgy, fracture mechanics, welding consumables, heat input management and repair methodologies.</p></li><li><p>Experienced in Engineering Critical Assessment (ECA) studies and their application to welding qualification and defect acceptance.</p></li><li><p>Proven experience in fabrication, welding qualification and construction activities for both sweet and sour service environments.</p></li><li><p>Demonstrated capability to act as technical authority and lead interfaces with Contractors, Certification Bodies and Company technical specialists.</p></li><li><p>Strong knowledge of pipeline welding codes and standards (API 1104, ASME, DNV), and COMPANY GS (PLR, PVV)</p></li><li><p>Experience with welding qualifications, procedures and field supervision.</p></li><li><p>Good understanding of construction execution and field constraints.</p></li><li><p>Level / Diploma: International Welding Engineer (IWE) certification mandatory.</p></li><li><p>Languages: Fluency in English (speaking and writing); Chinese/Arabic would be a plus</p></li></ul>
<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <p>Under general supervision:</p> <ul> <li>From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset.</li> <li>Establishes scope of work with site customer and site representative.</li> <li>Checks design documentation for adequacy to specific site conditions and agreed scope of work.</li> <li>Proposes engineering adjustments to site condition as required.</li> <li>Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion.</li> <li>Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice.</li> <li>Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter.</li> <li>Prepares periodic reports for upper management.</li> </ul> <p> </p> <p> <strong>Additional Role Responsibilities:</strong> </p> <p>(1). Supervises the activities of assigned personnel at BIN-UMAR &SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; <br>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; <br>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; <br>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; <br>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team; <br>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; <br>(7). Monitor and operate the SAP/CMMS system. <br>(8). Contribute and participate in successful completion of plant improvements; <br>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. <br>(10). Control, minimize and monitor flare losses & waste generation. <br>(11). Coordinates with Royal commission and other outside party for flare losses & waste management. <br>(12). Identify team and individuals limitations and develop contingency plans to address any short fall. </p><p><strong>Desired Candidate Profile</strong></p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields.</p> <p> </p> <p> <strong>Preferred Experience:</strong> <br> Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. <br> Recognized International Qualifications (NVQ, C&G, OPITO etc)<br> Valid Emergency Response competence<br> CMMS/SAP Experience <br> Coaching & Development Experience (Competence Assessors preferred) <br> Commissioning experience<br> Experience from similar challenging environments. (Wells experience a must for production operations personnel)<br> Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.)<br> Internationally recognized driving license<br> Good English skills, Arabic speaking advantageous<br> ISSOW/PTW experience <br> </p>
<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <b>Job Duties</b> <p>Under general supervision:</p> <ul> <li>From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset.</li> <li>Establishes scope of work with site customer and site representative.</li> <li>Checks design documentation for adequacy to specific site conditions and agreed scope of work.</li> <li>Proposes engineering adjustments to site condition as required.</li> <li>Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion.</li> <li>Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice.</li> <li>Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter.</li> <li>Prepares periodic reports for upper management.</li> </ul> <p> </p> <p> <strong>Additional Role Responsibilities:</strong> </p> <p>(1). Supervises the activities of assigned personnel at BIN-UMAR &SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; <br>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; <br>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; <br>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; <br>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team; <br>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; <br>(7). Monitor and operate the SAP/CMMS system. <br>(8). Contribute and participate in successful completion of plant improvements; <br>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. <br>(10). Control, minimize and monitor flare losses & waste generation. <br>(11). Coordinates with Royal commission and other outside party for flare losses & waste management. <br>(12). Identify team and individuals limitations and develop contingency plans to address any short fall. </p> <p> </p> <p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields.</p> <p> </p> <p> <strong>Preferred Experience:</strong> <br> Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil & gas industry. <br> Recognized International Qualifications (NVQ, C&G, OPITO etc)<br> Valid Emergency Response competence<br> CMMS/SAP Experience <br> Coaching & Development Experience (Competence Assessors preferred) <br> Commissioning experience<br> Experience from similar challenging environments. (Wells experience a must for production operations personnel)<br> Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.)<br> Internationally recognized driving license<br> Good English skills, Arabic speaking advantageous<br> ISSOW/PTW experience <br> </p>
<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p> <br><p> <strong>Position Summary</strong> </p> <p>The Geology Advisor provides expert geological interpretation, reservoir characterization, and development planning support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract. </p> <p> <strong>Job Duties</strong> </p> <p>Under broad direction from the Subsurface Technical Manager:</p> <ul> <li>Develop and apply advanced development geology techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li> <li>Accountable for ensuring robust geological understanding of the asset, integrating static and dynamic data to guide reservoir management, field development, and production optimization.</li> <li>The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.)</li> <li>Role includes data analysis, reservoir characterization and mapping, determination of reservoir rock and fluid properties, static uncertainty/risk management analysis, deterministic/probabilistic in-place hydrocarbon volumetric calculations, static modeling, reserves estimation, and other work related to reservoir understanding / development.</li> <li>Lead the interpretation of geological, geophysical, petrophysical, and drilling data to develop robust static reservoir models. Integrating well log, core, seismic, and production data to define reservoir architecture, facies distribution, and structural framework.</li> <li>Solid grounding in development geology and working knowledge of geologic operations, logging, directional drilling, petrophysics, geophysics, rock and core sampling and analysis, reservoir simulation and drilling & completions.</li> <li>Understands the fundamentals of petroleum engineering, subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li> <li>Collaborate with production and operations teams to identify and implement production enhancement opportunities. Additionally, translates technical insights into actionable operational and development plans.</li> <li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders .</li> <li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li> <li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li> <li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li> </ul> <p> </p> <p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><p style="font-size: 11px;"><br></p><ul style="font-size: 11px;"><li style="font-size: 11px;">Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc.</li><li style="font-size: 11px;">Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil & gas operator</li><li style="font-size: 11px;">Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li></ul><p style="font-size: 11px;"></p><p style="font-size: 11px;">Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Geology Advisor, Geology Advisor, Sr, and Technical Manager.</p></li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>
<span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under broad direction, as a subject matter expert:</p><br>
<ul>
<li>Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location.</li>
<li>Assists in supervising other technicians and prioritizes and/or assigns work when needed.</li>
<li>Possesses advanced diagnostic/troubleshooting knowledge and skills.</li>
<li>Performs advanced function testing to verify equipment readiness after maintenance.</li>
<li>Must be proficient in understanding/interpreting mechanical schematics/drawings/prints.</li>
<li>Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares.</li>
<li>Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record.</li>
<li>This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities.</li>
<li>Responsible for mentoring junior technicians.</li>
<li>Responsible for ensuring duties are performed in a safe, efficient, and effective manner.</li>
<li>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations.</li>
<li>Consequences of error are easily measured and can be confined. </li>
</ul> <p><strong>Additional Role Responsibilities:</strong></p><br>
<p>(1). Provide the professional technical Support for Rotating equipment and facilities operation and maintenance services; <br>(2). Maintenance, support and troubleshooting of vibration, lubrication, controls applications / systems of equipment; <br>(3). Mechanical support of manufacturing units across the facility; <br>(4). Responsible of the training and technical development of the Mechanical Maintenance organization; <br>(5). Responsible for the development and control the annual budget for the Mechanical Maintenance organization; <br>(6). Routinely analyze and report expenditures to ensure budget compliance; <br>(7). Participate and advise in developing plans for major shutdowns, construction or alteration projects where mechanical inspections will be critical to the accomplishment of the work; <br>(8). Become personally involved in all repairs during shutdowns to insure a trouble-free start-up. Assume responsible role in start-up of all major rotating equipment after shutdown. </p><br>
<br><br><b>Qualifications</b> <br><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred.</p><br>
<p><br><strong>Preferred Experience:</strong><br>Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil & gas industry. </p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br>
<p>Oils Opertion ST,N°29 Burjesia, Basra, Basrah, 61006, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br>
<p><strong>Requisition Number:</strong> 211592 <br><strong>Experience Level: </strong>Experienced Hire <br><strong>Job Family:</strong> Support Services <br><strong>Product Service Line: </strong>Halliburton Project Management <br><strong>Full Time / Part Time: </strong>Full Time</p><br>
<p><strong>Additional Locations for this position: </strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br>
</div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Duties and Responsibilities: Lead and oversee all branch activities, including operations, sales, and customer service.<br> Ensure compliance with banking policies, procedures, and regulatory requirements.<br> Develop and implement strategies to achieve the branch’s financial and operational targets.<br> Enhance customer satisfaction by maintaining high service standards.<br> Monitor branch performance indicators and prepare periodic performance reports.<br> Manage staff schedules, training, and performance evaluations.<br> Ensure accuracy in cash management, transaction processing, and record-keeping.<br> Promote cross-selling of banking products and services to achieve sales targets.<br> Handle customer complaints and resolve operational issues efficiently.<br> Coordinate with the Country Manager and other departments to implement business initiatives.<br> Apply internal controls to safeguard the bank’s assets and mitigate risks.<br> Attract New Customers and deposits, promote cross-selling opportunities, and follow up on customer visits and potential business opportunities in coordination with the relevant teams.<br> Monitor compliance with know your customer (KYC), AML and escalate relevant cases to the appropriate authorities.<br> Skills: Strong knowledge of branch operations and retail banking services.<br> Excellent leadership and team management skills.<br> Proficiency in financial analysis and business development.<br> Knowledge of regulatory compliance and audit requirements.<br> Strong communication, negotiation, and decision-making skills.<br> Ability to efficiently use core banking systems and digital platforms.<br> Bachelor’s degree in one of the following fields: Economics, Law, Public Administration, Financial Management, Business Administration, Accounting, Finance and Banking Sciences, Statistics, Banking Management, Investment and Resource Management, Financial and Accounting Control, or any related Field Minimum of 8 years of relevant experience in banking, financial.<br> Professional certification in Banking Management (CBM) is preferred.<br> Specialized training in leadership, risk management, and compliance is considered an added advantage.<br></span> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Duties and Responsibilities: Lead and oversee all branch activities, including operations, sales, and customer service.<br> Ensure compliance with banking policies, procedures, and regulatory requirements.<br> Develop and implement strategies to achieve the branch’s financial and operational targets.<br> Enhance customer satisfaction by maintaining high service standards.<br> Monitor branch performance indicators and prepare periodic performance reports.<br> Manage staff schedules, training, and performance evaluations.<br> Ensure accuracy in cash management, transaction processing, and record-keeping.<br> Promote cross-selling of banking products and services to achieve sales targets.<br> Handle customer complaints and resolve operational issues efficiently.<br> Coordinate with the Country Manager and other departments to implement business initiatives.<br> Apply internal controls to safeguard the bank’s assets and mitigate risks.<br> Attract New Customers and deposits, promote cross-selling opportunities, and follow up on customer visits and potential business opportunities in coordination with the relevant teams.<br> Monitor compliance with know your customer (KYC), AML and escalate relevant cases to the appropriate authorities.<br> Skills: Strong knowledge of branch operations and retail banking services.<br> Excellent leadership and team management skills.<br> Proficiency in financial analysis and business development.<br> Knowledge of regulatory compliance and audit requirements.<br> Strong communication, negotiation, and decision-making skills.<br> Ability to efficiently use core banking systems and digital platforms.<br> Bachelor’s degree in one of the following fields: Economics, Law, Public Administration, Financial Management, Business Administration, Accounting, Finance and Banking Sciences, Statistics, Banking Management, Investment and Resource Management, Financial and Accounting Control, or any related Field Minimum of 8 years of relevant experience in banking, financial.<br> Professional certification in Banking Management (CBM) is preferred.<br> Specialized training in leadership, risk management, and compliance is considered an added advantage.<br></span> </div>
<h4><b>Main Duties and Responsibilities:</b></h4><ul><li>Assist in rigging up and rigging down cementing service equipment at work locations under strict supervision.</li><li>Support the positioning and setup of cement storage vessels and the preparation of spacer fluids.<br></li><li>Assist in rigging up and operating data monitoring equipment.<br></li><li>Learn and assist in the operation of cementing equipment, including cement pumps, blenders, liquid additive metering systems, centrifugal pumps, and manifold equipment.<br></li><li>Assist with the operation of Automatic Density Control (ADC) systems, data acquisition systems, and bulk cement blending, delivery, and storage systems.<br></li><li>Assist in handling and operating cementing plug releasing tools under supervision.<br></li><li>Perform pre-trip and post-trip vehicle inspections and complete the required paperwork and reports.<br></li><li>Follow established operating procedures and instructions to ensure safe and efficient equipment operations.<br></li><li>Comply with all applicable Health, Safety, and Environmental (HSE) regulations, procedures, and guidelines.<br></li><li>Promote safety awareness, environmental responsibility, and safe working practices at all times.<br></li><li>Participate in quality improvement initiatives and support continuous improvement processes.<br></li><li>Communicate effectively with team members and supervisors to support field operations.<br></li><li>Apply basic mathematical, reading, writing, and computer skills to perform assigned duties accurately.<br></li><li>Complete required training courses, including Essential Mathematics, Red Book, and Cementing 1, as applicable.<br></li><li>Maintain equipment and work areas in a safe and orderly condition.<br></li><li>Perform other related duties as assigned by the supervisor in support of cementing operations.</li></ul><br><h4>Working Conditions:</h4><ul><li>Rotation: (21) Days on/(7) Days off</li></ul><p><strong>Desired Candidate Profile</strong></p><h4>Requirements:</h4><ul><li>Education: Minimum High School Diploma<br></li><li>Previous Experience: 1-3 years<br></li><li>Language Skills: Arabic, English, Kurdish<br></li><li>Computer Skills: Basic computer skills<br></li><li>Organizational Skills: Multitasking, Planning and scheduling, Prioritization<br></li><li>Other Skills: Driving</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><strong>Tiered Approach</strong></p><br> <p>In line with the commitment to safeguard capacity and support personnel already in the Organization, a majority of UNDP UNCDF/UNV vacancies are advertised using a tiered application process whereby:</p><br> <ul> <li><strong>Tier 0</strong>: UNDP/UNCDF/UNV IP staff holding permanent (PA) and fixed-term (FTA) appointments, whose posts will be abolished, or contracts will be terminated or not renewed during 2026.</li> <li><strong>Tier 1</strong>: Other UNDP/UNCDF/UNV staff holding permanent (PA) and fixed-term (FTA) appointments</li> <li><strong>Tier 2</strong>: UNDP/UNCDF/UNV staff holding temporary appointments (TA), personnel on regular PSA contracts, and Expert and Specialist UN Volunteers</li> <li><strong>Tier 3 or no tier indicated</strong>: All other contract types from UNDP/UNCDF/UNV and other agencies, and other external candidates</li> </ul> <p>Please make note of the Tier(s) indicated in the vacancy title, if any, and ensure that you satisfy the eligibility to apply.</p><br> <p><strong>Background</strong></p><br> <p>UNDP is committed to achieving workforce diversity in terms of gender, nationality, and culture. Individuals from minority groups, indigenous groups and persons with disabilities are equally encouraged to apply. All applications will be treated with the strictest confidence. </p><br> <p>UNDP does not tolerate sexual exploitation and abuse, any kind of harassment, including sexual harassment, and discrimination. All selected candidates will, therefore, undergo rigorous reference and background checks. </p><br> <p>UNDP is the leading United Nations organization in fighting to end the injustice of poverty, inequality, and climate change. Working with our broad network of experts and partners in 170 countries, we help nations to build integrated, lasting solutions for people and planet. Learn more at undp.org or follow at @UNDP </p><br> <p>Iraq is recognized as one of the most affected countries by the harmful effects of climate change. Iraq ratified the Paris Agreement on January 14, 2021. In October 2021, the Government of Iraq (GoI) signed their first National Determined Contribution (NDC), which has been presented at the COP26. The Government of Iraq has requested UNDP support in implementation of the NDC, including through capacity development, advisory for sectoral planning and formulation of related strategies, frameworks, and instruments. </p><br> <p>UNDP is the knowledge frontier organization for sustainable development in the UN Development System and serves as the integrator for collective action to realize the Sustainable Development Goals (SDGs). UNDP's policy work carried out at HQ, Regional and Country Office levels offers a spectrum of deep local knowledge to cutting-edge global perspectives and advocacy. UNDP invests in the Global Policy Network (GPN), a network of field-based and global technical expertise across a wide range of knowledge domains in support of the signature solutions and organizational capabilities envisioned in UNDP's Strategic Plan.</p><br> <p>UNDP is an accredited Implementing Agency for the Global Environment Facility (GEF) Trust Fund and the family of funds such as the Least Developed Countries Fund (LDCF), the Special Climate Change Fund (SCCF), and the Global Biodiversity Framework Fund (GBBF). As an Implementing Agency, UNDP offers countries highly specialized services for eligibility assessment, project formulation and due diligence, co-financing mobilization, implementation oversight, results management and evaluation, and knowledge management.</p><br> <p>Iraq faces significant environmental and public health risks associated with persistent organic pollutants (POPs), hazardous chemicals, obsolete pesticides, polychlorinated biphenyls (PCBs), unintentional POPs (UPOPs), industrial POPs (IPOPs), and chemically contaminated sites. Previous assessments identified substantial quantities of obsolete pesticides and potentially PCB-contaminated electrical equipment and highlighted significant technical and institutional capacity gaps in chemicals and contaminated-sites management.</p><br> <p>The Government of Iraq is a Party to major international chemicals and waste conventions, including the Stockholm, Basel, Rotterdam and Minamata Conventions. Iraq has previously developed a National Implementation Plan (NIP) under the Stockholm Convention; however, the existing NIP requires updating to reflect newly listed POPs, improved inventories, updated risk information, institutional developments and current national priorities.</p><br> <p>The Integrated Persistent Organic Pollutants (POPs) and Chemical Hotspots Management Project, therefore adopts an integrated approach combining:</p><br> <ul> <li>strengthening the national framework for POPs and hazardous chemicals management;</li> <li>updating the national POPs inventories and National Implementation Plan;</li> <li>strengthening laboratory, inspection, monitoring and institutional capacities;</li> <li>environmentally sound management and disposal of obsolete pesticides;</li> <li>management and disposal/phase-out of PCB-contaminated equipment, oils and waste; and</li> <li>assessment and remediation planning for priority chemical pollution hotspots.</li> </ul> <p>The project comprises three components. Component 1 focuses on improved management of POPs and hazardous chemicals; Component 2 focuses on high-risk POPs in the agriculture and power sectors; and Component 3 addresses chemical pollution hotspots and contaminated sites.</p><br> <p>Implementation will require extensive technical assistance, consultancy services, procurement of laboratory and field equipment, hazardous waste management services, capacity building, site assessments, remediation planning and policy/regulatory development.</p><br> <p>The project will be implemented by UNDP through an Output Agreement with the Ministry of Environment. The Project Manager will therefore be the principal day-to-day focal point for implementation and coordination within the project management structure.</p><br> <p><strong>Institutional Arrangement</strong></p><br> <p>The Project Manager will directly report to the Programme Specilaist with matrix reporting to the chief technical specialist of the Environment, Energy and Climate Change (EECC), UNDP Iraq. The position holder will be part of a dynamic team of national and international experts working on policy advocacy, capacity building, innovation and sharing best practices with national stakeholders on climate change, environmental management and POPs and Chemical Hotspots Management.</p><br> <p><strong>Duties and Responsibilities</strong></p><br> <p><strong>Provide Strategic Technical Direction and Leadership</strong></p><br> <ul> <li>Lead strategic planning for the project as well as formulation and periodic revisions of the project’s annual work plan (AWP), including plans for budget, HR and procurement that are developed in close coordination with UNDP’s Country Office Programme, HR, and Procurement teams. Lead development of detailed implementation plans. </li> <li>Lead the provision of high-level strategic and technical guidance to the project, ensuring alignment with UNDP corporate priorities, donor requirements, national development frameworks, and relevant international commitments.</li> <li>Advise UNDP management and project stakeholders on emerging technical issues, risks, opportunities, and strategic approaches to enhance project impact, sustainability, and policy relevance.</li> <li>Oversee the overall technical quality of project outputs, deliverables, studies, assessments, and knowledge products to ensure compliance with international standards and best practices.</li> <li>Provide leadership in the identification, design, and implementation of innovative technical solutions and approaches that support the achievement of project objectives and intended outcomes.</li> <li>Guide the integration of cross-cutting issues, including gender equality, environmental sustainability, social inclusion, human rights, and capacity development, into project planning and implementation.</li> <li>Support adaptive management by recommending strategic adjustments based on implementation progress, lessons learned, and changing contextual circumstances.</li> <li>Provide direction, guidance, and direct supervision to UNDP project personnel. Undertake technical review of project documents produced by the project team and partners, and ensure high technical standards are met. </li> <li>Ensure proper execution of all administrative activities associated with project implementation, including mobilizing goods and services, preparing Terms of Reference, completing contracting processes, recruiting/selecting consultants and experts, and managing financial arrangements/transactions and their correct authorization.</li> <li>Identify opportunities for synergies with other projects within UNDP and beyond, to advance the key objectives and grow its focus. </li> </ul> <p><strong>Lead Technical Quality Assurance and Programme Oversight</strong></p><br> <ul> <li>Provide technical review and quality assurance of project work plans, technical reports, procurement specifications, Terms of Reference, training materials, policy products, and other project deliverables.</li> <li>Ensure that project activities are implemented in accordance with approved project documents, UNDP rules and regulations, donor requirements, and national priorities.</li> <li>Support the technical teams in maintaining high standards of project delivery, timeliness, and cost-effectiveness.</li> <li>Review technical outputs developed by consultants, contractors, service providers, and implementing partners and provide recommendations for improvement where necessary.</li> <li>Ensure consistency and coherence across project components and interventions to maximise results and avoid duplication of efforts.</li> <li>Provide technical support to the implementing partners and act as a liaison between UNDP and the partners. </li> <li>Support resource mobilization efforts and project development.</li> </ul> <p><strong>Support Strategic Partnerships and Stakeholder Engagement</strong></p><br> <ul> <li>Facilitate technical dialogue and collaboration between UNDP, government institutions, development partners, academia, civil society organisations, and private sector stakeholders. </li> <li>Provide technical advice and support to implementing partners to strengthen ownership, coordination, and effective project implementation. </li> <li>Identify opportunities for strategic partnerships, resource mobilisation, and collaboration that can enhance project sustainability and scale-up successful interventions. </li> <li>Represent the project and provide technical inputs during meetings, workshops, consultations, conferences, and policy dialogues as required.</li> </ul> <p><strong>Monitor and report on progress in implementing project activities and achieving the targets set.</strong></p><br> <ul> <li>Provide leadership and technical advice to the project in developing baselines and indicators for project monitoring and evaluation and coordinate the finalization of detailed results framework. Develop clear strategies and an effective system for data collection, means of verification, and information sharing and reporting. </li> <li>Lead the implementation of project monitoring, evaluation, and results framework to identify plan deviations and other problems; and make needed course corrections within agreed upon tolerances to achieve results. Conduct field visits as required to verify project activities relative to stated targets and provide regular field updates to UNDP management. </li> <li>Lead the development and conduct of mid-term and annual reviews, and end line assessment; and coordinate the conduct of independent evaluations. Organize project review and evaluation meetings. Follow up on the implementation of decisions, recommendations, and course corrections.</li> <li>Manage and monitor project risks, including social and environmental risks, initially identified and submit new risks to appropriate project governing bodies for consideration and decision on possible actions. </li> <li>Coordinate the preparation of corporate, donor and government reports in line with the reporting schedule and UNDP and donor requirements. Ensure provision of ad hoc reports and information requested by relevant entities. </li> <li>Ensure proper operational and financial closure of the project.</li> </ul> <p><strong>Facilitate knowledge and capacity building, knowledge sharing, and advocacy relevant to the assigned thematic areas.</strong></p><br> <ul> <li>Provide technical guidance for the development and refinement of project indicators, monitoring frameworks, and reporting tools.</li> <li>Review project progress and results regularly and provide recommendations to address implementation challenges and improve performance.</li> <li>Contribute to the documentation of lessons learned, good practices, case studies, and knowledge products to support institutional learning and replication of successful approaches.</li> <li>Lead and support capacity-building initiatives, technical trainings, workshops, and knowledge-sharing activities for project staff, government counterparts, and stakeholders.</li> <li>Promote knowledge exchange and contribute to relevant communities of practice, technical networks, and learning platforms.</li> </ul> <p><strong>The incumbent performs other duties within their functional profile as deemed necessary for the efficient functioning of the Office and the Organization.</strong></p><br> <p><strong>Competencies</strong></p><br> <p><strong>Core</strong></p><br> <ul> <li><strong>Achieve Results: </strong>LEVEL 3: Set and align challenging, achievable objectives for multiple projects, have lasting impact</li> <li><strong>Think Innovatively: </strong>LEVEL 3: Proactively mitigate potential risks, develop new ideas to solve complex problems</li> <li><strong>Learn Continuously: </strong>LEVEL 3: Create and act on opportunities to expand horizons, diversify experiences</li> <li><strong>Adapt with Agility: </strong>LEVEL 3: Proactively initiate and champion change, manage multiple competing demands</li> <li><strong>Act with Determination: </strong>LEVEL 3: Think beyond immediate task/barriers and take action to achieve greater results</li> <li><strong>Engage and Partner: </strong>LEVEL 3: Political savvy, navigate complex landscape, champion inter-agency collaboration</li> <li><strong>Enable Diversity and Inclusion: </strong>LEVEL 3: Appreciate benefits of diverse workforce and champion inclusivity</li> <li><strong>People Management: </strong>UNDP People Management Competencies can be found in the dedicated site.</li> </ul> <p><strong>Cross-Functional & Technical competencies</strong></p><br> <p><strong><u>Business Direction & Strategy</u></strong></p><br> <ul> <li><strong>System Thinking</strong> <ul> <li>Ability to use objective problem analysis and judgement to understand how interrelated elements coexist within an overall process or system, and to consider how altering one element can impact on other parts of the system</li> </ul></li> </ul> <p><strong><u>2030 Agenda: Planet</u></strong></p><br> <ul> <li><strong>Nature</strong> <ul> <li>Environmental Governance: Global Environmental Governance</li> </ul></li> </ul> <p><strong><u>Finance</u></strong></p><br> <ul> <li><strong>Budget Management</strong> <ul> <li>Ability to support budgetary aspects of work planning process, drawing and management of team budgets.</li> </ul></li> </ul> <p><strong><u>Business Direction & Strategy</u></strong></p><br> <ul> <li><strong>Effective Decision Making</strong> <ul> <li>Take decisions in a timely and efficient manner in line with one’s authority, area of expertise and resources.</li> </ul></li> <li><strong>Negotiation and influence</strong> <ul> <li>Reach an understanding, persuade others, resolve points of difference, gain advantage in the outcome of dialogue, negotiate mutually acceptable solutions through compromise, and create win-win situations.</li> </ul></li> </ul> <p><strong><u>Business Management</u></strong></p><br> <ul> <li><strong>Project management</strong> <ul> <li>Ability to plan, organize, prioritize, and control resources, procedures, and protocols to achieve specific goals.</li> </ul></li> <li><strong>Risk management</strong> <ul> <li>Identify and organize action around mitigating and proactively managing risks</li> </ul></li> </ul> <p><strong>Minimum Qualifications of the Successful NPSA</strong></p><br> <p><strong>Minimum Education requirements</strong></p><br> <ul> <li>Advanced university degree (Master's degree or equivalent) in Environmental Management, Environmental Science, Environmental Engineering, Chemical Engineering, Natural Resources Management, Development Studies, Project Management or a relevant related field is required, OR</li> <li>A first-level university degree (Bachelor's degree) in the above fields in combination with two additional years of relevant experience will be given due consideration in lieu of the advanced university degree</li> </ul> <p><strong>Minimum years of relevant work experience</strong></p><br> <ul> <li>Minimum 5 years (with master’s degree) or 7 years (with bachelor’s degree) of progressively responsible professional experience at the national or international level in environmental management, chemicals and waste management, climate change and biodiversity, natural resources management, environmental safeguards, environmental policy and governance, and project management is required.</li> </ul> <p><strong>Required skills</strong></p><br> <ul> <li>Demonstrated experience in project management, preferably in environmental, chemicals, hazardous waste, climate, natural resources or sustainable development projects.</li> <li>Demonstrated experience managing multidisciplinary teams and consultants.</li> <li>Experience managing projects involving Government institutions and international development partners.</li> <li>Proven Experience in the use of computers and office software packages (MS Word, Excel, etc) and advanced knowledge of spreadsheet and database packages, and experience in handling web-based management systems</li> </ul> <p><strong>Desired skills in addition to the competencies covered in the Competencies section</strong></p><br> <ul> <li>Experience in working, liaising, and collaborating with UN agencies, governments, NGOs, civil society organizations, and public international organizations.</li> <li>Proven knowledge of capacity building theory and capacity building/assessment methodologies</li> </ul> <p><strong>Required Language(s)</strong></p><br> <ul> <li>Fluency in written and spoken English and Arabic is required.</li> </ul> <p><strong>Equal opportunity</strong></p><br> <p>As an equal opportunity employer, UNDP values diversity as an expression of the multiplicity of nations and cultures where we operate and, as such, we encourage qualified applicants from all backgrounds to apply for roles in the organization. Our employment decisions are based on merit and suitability for the role, without discrimination. </p><br> <p>UNDP is also committed to creating an inclusive workplace where all personnel are empowered to contribute to our mission, are valued, can thrive, and benefit from career opportunities that are open to all.</p><br> <p><strong>Sexual harassment, exploitation, and abuse of authority</strong></p><br> <p>UNDP does not tolerate harassment, sexual harassment, exploitation, discrimination and abuse of authority. All selected candidates, therefore, undergo relevant checks and are expected to adhere to the respective standards and principles. </p><br> <p><strong>Right to select multiple candidates</strong></p><br> <p>UNDP reserves the ri</p> </div>
We are seeking a highly experienced Senior Architectural Engineer with strong technical expertise and extensive hands-on experience in site execution. <br><b>Requirements: <br></b> Minimum 10 years of experience in architectural finishing and interior fit-out. <br> Proven ability to lead technical coordination, review drawings, BOQs, and specifications, and develop construction documentation. <br> Proven experience in executing high-end finishing and fit-out works. <br> Ability to assume broader project management responsibilities. <br> Experience in hospitality or luxury residential projects is a strong advantage.
<p><h4>Belong, connect, grow, with KBR!</h4>
<p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p>
<p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p>
<p>KBR is looking for a Site Electrical Supervisor to be based in Basra, Iraq – daily commute.</p>
<h4>Main missions</h4>
<ul>
<li>Ensure safe, compliant, and high-quality execution of all electrical construction, installation, testing, and pre-commissioning activities at site.</li>
<li>Supervise EPC contractor and subcontractors electrical works in accordance with approved drawings, project specifications, method statements, ITPs, applicable codes, and company requirements.</li>
<li>Coordinate electrical activities with construction, engineering, QA/QC, HSE, commissioning, and other disciplines to achieve the project schedule and system priorities.</li>
<li>Identify technical, quality, safety, and constructability issues, and ensure timely resolution and close-out.</li>
<li>Support mechanical completion, energization readiness, commissioning, and handover of electrical systems.</li>
</ul>
<h4>Key activities</h4>
<p><strong>Site supervision and construction control</strong></p>
<ul>
<li>Supervise daily electrical construction activities, including installation of HV, MV, and LV equipment and systems.</li>
<li>Monitor installation of transformers, switchgear, motor control centres, generators, UPS and DC systems, distribution boards, power and control cables, lighting, small power, earthing, lightning protection, and electrical heat tracing where applicable.</li>
<li>Verify equipment location, orientation, access, supports, interfaces, and installation against approved AFC drawings and vendor requirements.</li>
<li>Ensure cable tray, ladder, conduit, cable pulling, segregation, dressing, glanding, termination, identification, and fire-stopping works comply with project requirements.</li>
<li>Monitor preservation, storage, handling, and protection of electrical equipment and materials at site.</li>
<li>Ensure work fronts are properly planned and that required drawings, materials, tools, access, permits, and preceding works are available.</li>
</ul>
<p><strong>Technical compliance and quality</strong></p>
<ul>
<li>Ensure execution in accordance with approved AFC drawings, specifications, equipment data sheets, vendor documentation, method statements, ITPs, and applicable international standards.</li>
<li>Participate in inspection requests and witness required hold and witness points with QA/QC personnel.</li>
<li>Inspect equipment installation, bolted connections, cable routing and segregation, terminations, earthing connections, labelling, and general workmanship.</li>
<li>Witness or review electrical tests, as applicable, including insulation resistance, continuity, earthing resistance, winding resistance, ratio tests, protection relay tests, cable tests, functional checks, and interlock verification.</li>
<li>Review and follow up punch items, site observations, non-conformities, and corrective actions until closure.</li>
<li>Assist in checking red-line mark-ups, test records, inspection reports, and as-built documentation.</li>
</ul>
<p><strong>Contractor supervision and progress</strong></p>
<ul>
<li>Monitor contractor and subcontractor manpower, supervision, productivity, work quality, and compliance with the approved construction schedule.</li>
<li>Review short-term work plans and report constraints, delays, interface issues, and recovery requirements to the Electrical Superintendent or Construction Manager.</li>
<li>Attend daily coordination meetings, site walkthroughs, progress reviews, toolbox talks, and technical meetings as required.</li>
<li>Prepare clear daily and weekly reports covering progress, manpower, inspections, constraints, quality issues, HSE observations, and planned activities.</li>
<li>Ensure contractor personnel assigned to specialized electrical work are competent and appropriately authorized.</li>
</ul>
<p><strong>Interfaces, completion and commissioning</strong></p>
<ul>
<li>Coordinate electrical interfaces with civil, structural, mechanical, piping, instrumentation, telecom, HVAC, package vendors, and commissioning teams.</li>
<li>Ensure foundations, embedded items, sleeves, trenches, rooms, supports, cable routes, and equipment access are ready before electrical installation.</li>
<li>Support systemization, mechanical completion checks, punch-listing, turnover dossier preparation, and handover by system or subsystem.</li>
<li>Participate in energization readiness reviews and ensure outstanding construction, quality, and safety items are controlled before energization.</li>
<li>Support pre-commissioning and commissioning activities, including vendor attendance, functional testing, loop and interlock checks, and troubleshooting.</li>
</ul>
<h4>HSE responsibility</h4>
<ul>
<li>Ensure electrical works are performed in accordance with project HSE requirements, approved risk assessments, method statements, permit-to-work procedures, and isolation rules.</li>
<li>Pay particular attention to electrical safety, lockout/tagout, temporary power, excavation and underground services, lifting operations, work at height, confined spaces, and simultaneous operations.</li>
<li>Intervene and stop unsafe work when necessary, report unsafe acts and conditions, and verify implementation of corrective measures.</li>
<li>Participate in toolbox talks, safety walks, audits, incident investigations, and lessons-learned activities.</li>
<li>Promote a strong safety culture and ensure good housekeeping in electrical work areas, substations, electrical rooms, and cable routes.</li>
</ul>
<h4>Professional experience</h4>
<ul>
<li>More than 10 years of relevant experience in electrical construction and site supervision on large EPC/EPSCC projects in oil and gas, power generation, water treatment, utilities, or major industrial facilities.</li>
<li>Significant field experience supervising electrical installation, testing, pre-commissioning, and handover activities.</li>
</ul>
<h4>Experience in similar position</h4>
<ul>
<li>Previous experience as Site Electrical Supervisor, Electrical Construction Supervisor, or equivalent position on a major project.</li>
<li>Hands-on experience with HV, MV, and LV systems; transformers; switchgear; MCCs; UPS and DC systems; power and control cables; earthing; lighting; and electrical equipment associated with rotating and packaged equipment.</li>
<li>Experience in power generation facilities, large pumping stations, substations, or water treatment plants is preferred.</li>
<li>Experience on Middle East projects and/or remote construction sites is an advantage.</li>
</ul>
<h4>Technical skills</h4>
<ul>
<li>Strong knowledge of electrical construction methods, installation practices, inspection requirements, testing, energization, and completion processes.</li>
<li>Ability to read and interpret single-line diagrams, schematics, wiring diagrams, cable schedules, equipment layouts, earthing layouts, interconnection diagrams, vendor drawings, and AFC documentation.</li>
<li>Good understanding of electrical interfaces with civil, mechanical, instrumentation, telecom, HVAC, and package systems.</li>
<li>Familiarity with ITP, RFI, NCR, punch-list, mechanical completion, turnover, and quality-record processes.</li>
<li>Working knowledge of applicable IEC, IEEE, NFPA, ISO, and project-specific standards and requirements.</li>
<li>Competence in reporting, progress monitoring, work-front planning, and use of standard office applications.</li>
</ul>
<h4>Level / diploma</h4>
<ul>
<li>Bachelor’s degree in Electrical Engineering preferred.</li>
<li>A recognized technical diploma in Electrical Engineering may be accepted with substantial relevant site experience.</li>
<li>Relevant electrical safety, HV authorization, commissioning, or construction supervision training is an advantage.</li>
</ul>
<h4>Languages</h4>
<ul>
<li>Proficiency in English is mandatory. Knowledge of Arabic is an advantage.</li>
</ul>
<h4>Soft skills</h4>
<ul>
<li>Strong field presence, leadership, and contractor-management capability.</li>
<li>Clear communication and coordination skills in a multicultural environment.</li>
<li>Proactive, practical, safety-conscious, and quality-focused approach.</li>
<li>Ability to prioritize work, resolve site issues, manage interfaces, and work under schedule pressure.</li>
<li>Ability to challenge non-compliant work and intervene firmly when safety or quality is at risk.</li>
</ul>
<p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>About Rahal Rahal is the travel mini-app inside Iraq’s Super Qi ecosystem; a rocketship redefining how millions of travelers search, book, and manage journeys across flights, hotels, and digital services.<br> We make travel simple, safe, and accessible to everyone, everywhere.<br> As part of a fast-growing travel-tech team spanning Iraq and the UAE, you’ll design experiences that inspire confidence, delight, and connection for every traveler who books with Rahal.<br> Role Overview Join our fast-growing travel tech startup to manage end-to-end travel operations, from bookings to vendor coordination, ensuring seamless and efficient processes.<br> Drive operational excellence and support the company’s growth by delivering exceptional travel experiences Key Responsibilities Providing excellent customer service to corporate clients, travel arranges, individual travelers Confirming and completing reservations according to internal standards Managing client requests, providing an efficient and personalized service which caters to international corporate clients’ needs Coordinate and book transportation and accommodation arrangements Includes but is not limited to (flights, trains, and car rentals and hotels).<br> Arrange and ensure all bookings align with client preferences and policies.<br> Handle and resolve travel-related issues and emergencies promptly.<br> Maintain and update travel itineraries and documentation (invoices, booking conformations, etc.<br>) Communicate effectively with clients to confirm details and provide travel support.<br> Ensure compliance with travel policies and regulations.<br> Manage changes, cancellations, and special requests and handle emergency situations with professionalism Stay updated on travel regulations and safety protocols Ability to work well under pressure and meet tight deadlines Arrange high level business trips with the ability to be adaptive in changing Qualifications: 2+ years of experience in travel coordination, hospitality, or customer service.<br> Preferrable Professional experience related to organizing travels or Call centers.<br> Had the exposure to GDSs including Amadeus, Galileo, and Sabre, with a strong track record of accurate and efficient reservation management.<br> Proficiency in travel booking software and tools.<br> Ability to handle travel-related issues calmly and efficiently.<br> Knowledge of travel policies, regulations, and best practices.<br> Excellent Self-management and good organizational skills.<br> Excellent interpersonal skills to communicate effectively and with confidence to create a positive company image Initiative and willingness to constantly learn and develop.<br> Flexibility to work various shifts, including weekends and holidays.<br> Role is open for whom are native in Arabic and Excellent English communication skills, both verbal and written (daily work in English) Personality Traits Biased for Action- thrives in ambiguity, acts fast, and learns even faster.<br> Traveler-Obsessed- every decision starts with “How does this help the traveler?<br>” Team Player- collaborates naturally across functions and geographies.<br> ⚙️ Operator Mindset- thrives in start-ups and scale-ups; comfortable navigating growth and chaos.<br> Strategic & Executional- balances long-term vision with hands-on delivery discipline.<br> Why Rahal Be part of Iraq’s fastest-growing travel platform inside the Super Qi ecosystem .<br> Work with passionate builders shaping the future of digital travel in the Middle East.<br> Solve real traveler problems at scale, from seamless flight booking to next-gen loyalty.<br> Join a Rocketship where ownership, speed, and creativity truly matter.<br> Become part of a regional expansion in the horizon.<br></span> </div>
<p><b style="font-size: 11px;">DUTIES:</b></p><ul><li>Provide specific support of construction technics and improvements and facilitate verification of products and/or service support applications, recommend training, tools, and methods for sound and safe construction principals.</li><li>Align the quality management function with the performance needs of the product line and/or service support application.</li><li>Manage and maintain project portfolios, adhere to policies and procedures, the basis being ISO 9001:2015 Standard requirements, understand OBO and DoS maintenance practices and policies, and USACE requirements.</li><li>Maintain an audit schedule, and perform audits of procedures, reporting requirements, plans, programs, and keeping records, reviewing cut sheets, horizontal and vertical building codes.</li><li>Conduct site inspection, verification of safety practices and procedures, material deliveries and product / materials standards.</li><li>Record data and analyze performance of material testing, hardness, and slump testing, project change bulletins and change orders.</li><li>Track deficiencies and work with management to define corrective action plans and close out deficiencies, understand CAPA principals and methods.</li><li>Collect and analyze data to determine performance trends on Mechanical, Electrical and Plumping systems and assist in house teams in reparations, oversee ad direct sub-contractors work and products, be aware of new product lines, parts and manufacturing technics.</li><li>Prepare and provide daily, weekly and monthly reports to management, documents progress and compliance by reporting and photographs, must obtain RSO photo badge approval.</li><li>Ensure quality-related training is provided by the Program and sub-contractor employees.</li><li>Implement, maintain Program Instructions, plans, and SOPs.</li><li>Ensure archives and libraries are reviewed and revised on a planned and scheduled timetable.</li></ul><p><b><br></b></p><p><b>REQUIRED:</b></p><p>Minimum Acceptable Experience Level: Five (5) years experience in Quality Assurance/Control in construction projects. Five (5) years experience as a Quality Management Professional, supporting a DoD or DOS program. At least two (2) years international experience in challenging locations, preferably the Middle East.</p><p>Knowledge, Skills, and Abilities:</p><ul><li>Knowledge of ALL principles and processes involved in Quality Construction Management.</li><li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures, a basic understanding of local customs and culture and language.</li><li>Exercise sound judgment and make decisions independently and be able to take direction from leadership.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules, at multiple sites and projects.</li><li>Must have excellent people skills, organizational and time management abilities.</li><li>Expert computer skills, specifically in Microsoft Word, PowerPoint, and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li></ul><p>Education/Certification:</p><p>Certification of Quality Construction Inspector, or ten (8) years related experience and/or education. Licenses and Certifications: ISO 9001:2015 certification. Valid drivers license from Home of Record.</p><p>Security Vetting: Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</p><p>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p><p>Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p><p><b><br></b></p><p><b>OTHER RESPONSIBILITIES:</b></p><p>Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p><p>Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p><p>Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Acceptable Experience Level: Five (5) years experience in Quality Assurance/Control in construction projects. Five (5) years experience as a Quality Management Professional, supporting a DoD or DOS program. At least two (2) years international experience in challenging locations, preferably the Middle East.</p><p>Knowledge, Skills, and Abilities:</p><ul><li>Knowledge of ALL principles and processes involved in Quality Construction Management.</li><li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures, a basic understanding of local customs and culture and language.</li><li>Exercise sound judgment and make decisions independently and be able to take direction from leadership.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules, at multiple sites and projects.</li><li>Must have excellent people skills, organizational and time management abilities.</li><li>Expert computer skills, specifically in Microsoft Word, PowerPoint, and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li></ul><p>Education/Certification:</p><p>Certification of Quality Construction Inspector, or ten (8) years related experience and/or education. Licenses and Certifications: ISO 9001:2015 certification. Valid drivers license from Home of Record.</p><p>Security Vetting: Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</p><p>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p><p>Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
At EY, we're all in to shape your future with confidence. <br>We'll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to go. <br>Join EY and help to build a better working world. <br><ul><li><strong>EY Baghdad - Assurance - Audit Internship Program FY26</strong><br><strong>Location: Baghdad, Iraq.</strong><br><strong>What if your career could have a lasting impact on you, and on the world?</strong><br>Here at EY, you'll have the chance to build a truly exceptional experience. We'll empower you with the latest technology, surround you with high-performing teams, and provide the global scale and diverse and inclusive culture you need to discover your full potential. Through our coaching and training programs, you'll develop the skillsets you need to stay relevant today and in the future - all while building a network of colleagues, mentors, and leaders who will be on the journey with you at EY and beyond.<br><strong>The exceptional EY experience. It's yours to build.</strong><br><strong>The opportunity: your next adventure awaits</strong><br>You will be Joining one of the most trusted, respected and influential teams in the industry. Global Assurance's purpose is to inspire confidence and trust to help build a better working world. We do so by protecting and serving the public interest, promoting transparency, supporting investor confidence and economic growth and nurturing talent to provide future business leaders for the global marketplace. Click here to learn more about our Assurance service line.<br>The opportunity is specifically in the Audit sub-service line under Assurance.Our tailored external audit services help build trust and confidence through transparency, clarity and consistency. We are 79,000+ professionals based worldwide across 150 countries. Audit services involve reporting on the fairness in all material respects with which a client's audited financial statements are presented, in conformity with the applicable financial reporting framework.<br>We are passionate about making sure the experience you have with us lasts a lifetime. To demonstrate this, we have developed a Graduate Program which offers you a combination of varied on-the-job work experience as well as web based/self-study learnings. The combination of such components will support you in developing your knowledge around the services we offer while building your communication and interpersonal skills. Along the way you will be supported and coached by a team of professionals within your location.<br><strong>What we look for</strong><br><ul><li><strong>You have an agile, growth-oriented mindset.</strong> What you know matters. But the right mindset is just as important in determining success. We're looking for people who are innovative, can work in an agile way and keep pace with a rapidly changing world.</li><li><strong>You are curious and purpose driven. </strong>We're looking for people who see opportunities instead of challenges, who ask better questions to seek better answers that build a better working world.</li><li><strong>You are inclusive.</strong> We're looking for people who seek out and embrace diverse perspectives, who value differences, and team inclusively to build safety and trust.</li><li><strong>Qualifications:</strong></li></ul><ul><li>Bachelor's Degree in Accounting</li><li>GPA 3+ or equivalent</li><li>Bahraini nationals will only be considered.</li><li>Graduated less than 18 months.</li></ul><br><strong>What's in it for you</strong><br><ul><li>Accelerate your technical capabilities and transformative leadership skills with future-focused courses and development programs.</li><li>Broaden your horizons by working on highly integrated teams across the globe and collaborate with people of diverse backgrounds - both professionally and culturally.</li><li>Bring out the best in yourself with continuous investment in your personal well-being and career development.</li><li>Develop your own personal purpose and help us create a positive ripple effect on our teams, our business, clients and society - building a better working world, together.</li></ul><br><strong>What you can expect</strong><br><ul><li><strong>Step 1: Apply</strong></li></ul><br>If you can confidently demonstrate that you meet the criteria above, please complete the online application as soon as possible. Make sure to answer all questions.<br>Make sure you apply early and do not forget to follow the instructions carefully and answer all the questions to ensure your application is successful.<br><ul><li><strong>Step 2: Test</strong></li></ul><br>After we review your application, you will receive an invitation email from 'EY Careers' to complete the EY online assessments. Approach the tests as you would approach any new challenge. It might be tough, but you can do it!<br><ul><li><strong>Step 3: On Demand Interview</strong></li></ul><br>Upon passing the assessments, you will receive an email invitation to complete a prerecorded video interview. You will be required to record yourself responding to behavioral based questions. Being yourself is key to passing this step of the recruitment process.<br><ul><li><strong>Step 4: Attend</strong></li></ul><br>Once you have been shortlisted, you may be invited to attend a recruitment day or an interview. This is your opportunity to visit our office, speak with our people and ask questions about life and work at EY.<br><ul><li><strong>Step 5: Receive</strong></li></ul><br>If you are a great fit for the opportunity, you will receive an offer to join EY and begin your career at one of the best companies to work for. It's time to celebrate.</li></ul><br><b>EY | Building a better working world </b><br>EY is building a better working world by creating new value for clients, people, society and the planet, while building trust in capital markets.<br>Enabled by data, AI and advanced technology, EY teams help clients shape the future with confidence and develop answers for the most pressing issues of today and tomorrow.<br>EY teams work across a full spectrum of services in assurance, consulting, tax, strategy and transactions. Fueled by sector insights, a globally connected, multi-disciplinary network and diverse ecosystem partners, EY teams can provide services in more than 150 countries and territories.<br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Wood is recruiting for a Junior Customs Clearance & Safety Specialist to join its Iraq business unit focusing on providing daily support for customs clearance coordination and safety administration to ensure compliant and efficient material movements.</p><br><p>This role is a full-time on-site role in Basra, Iraq on 5/2 rotation.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy & Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement </b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Junior Customs Clearance & Safety Specialist to join its Iraq business unit focusing on providing daily support for customs clearance coordination and safety administration to ensure compliant and efficient material movements.</p><br><p>This role is a full-time on-site role in Basra, Iraq on 5/2 rotation.</p><br><p><i><strong>#Wood #Iraq #Basra #Junior Customs Clearance & Safety Specialist</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Junior Customs Clearance & Safety Specialist to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects </strong></p><br><p><strong>Designing the future. Transforming the world. </strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. </p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li><strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li><strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones </li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p><span>Provide daily support for customs clearance coordination and safety administration to ensure compliant and efficient material movements for WQ1. Assist in reviewing shipping documents, coordinating with suppliers, freight forwarders, BOC and FOD departments, maintaining transportation safety records, supporting journey management processes, and compiling HSE performance data. Contribute to safe and timely logistics operations through effective communication, documentation control and reporting. The scope is intentionally operational and support-oriented, aligned with specialist-level positions in the Supply Chain Section.</span></p><br><p><span><strong>Working Environment:</strong></span></p><br><p><span>Office-based role with regular visits to warehouses, FOD, customs clearance locations, contractor offices and operational sites. Frequent communication with suppliers, freight forwarders, customs brokers, BOC departments. May require occasional travel to support customs clearance activities, logistics operations and transportation safety inspections. </span></p><br><p><span><strong><u>Key Functions & Activities:</u></strong></span></p><br><p><span><strong>Support Customs Clearance Activities:</strong></span></p><br><ul> <li><span>Review shipping and customs clearance documents for completeness and accuracy before submission.</span></li> <li><span>Follow up customs clearance progress and maintain shipment tracking records.</span></li> <li><span>Liaise with suppliers, freight forwarders, customs brokers, BOC and FOD departments regarding document requirements and shipment status.</span></li></ul><p><span><strong>Support Transportation Safety Administration:</strong></span></p><br><ul> <li><span>Verify drivers' licenses, training certificates and vehicle compliance documents are valid and updated.</span></li> <li><span>Assist in transportation safety inspections and follow up corrective actions as instructed.</span></li> <li><span>Support logistics contractors in submitting required safety documents and reports.</span></li> <li><span>Maintain document filing, trackers and action logs for customs clearance and logistics safety activities.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable? </strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges. </p><br><p><strong>Expected:</strong></p><br><ul> <li><span>Bachelor's Degree. Basic knowledge of Iraqi customs clearance procedures, import/export documentation requirements, transportation operations and logistics safety practices.</span></li></ul><p><span><strong>Professional Certifications: </strong>N/A</span></p><br><p><span><strong>Work Experience: </strong>Minimum 1 years' experience in customs clearance, logistics coordination, transportation administration, or HSE administration or related fields. Experience in Oil & Gas industry is preferred.</span></p><br><p><span><strong>Languages: </strong></span></p><br><ul> <li><span>Arabic (Mother Tongue).</span></li> <li><span>Fluency in English (written and spoken) is required. </span></li></ul><p><span><strong>Technical Competencies: </strong>Customs Clearance Coordination, Journey Management Administration, Transportation Safety Management, HSE Data Reporting, Logistics Coordination, </span></p><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
At EY, we're all in to shape your future with confidence. <br>We'll help you succeed in a globally connected powerhouse of diverse teams and take your career wherever you want it to go. <br>Join EY and help to build a better working world. <br><ul><li><strong>EY Baghdad - Assurance - Audit Internship Program FY26</strong><br><strong>Location: Baghdad, Iraq.</strong><br><strong>What if your career could have a lasting impact on you, and on the world?</strong><br>Here at EY, you'll have the chance to build a truly exceptional experience. We'll empower you with the latest technology, surround you with high-performing teams, and provide the global scale and diverse and inclusive culture you need to discover your full potential. Through our coaching and training programs, you'll develop the skillsets you need to stay relevant today and in the future - all while building a network of colleagues, mentors, and leaders who will be on the journey with you at EY and beyond.<br><strong>The exceptional EY experience. It's yours to build.</strong><br><strong>The opportunity: your next adventure awaits</strong><br>You will be Joining one of the most trusted, respected and influential teams in the industry. Global Assurance's purpose is to inspire confidence and trust to help build a better working world. We do so by protecting and serving the public interest, promoting transparency, supporting investor confidence and economic growth and nurturing talent to provide future business leaders for the global marketplace. Click here to learn more about our Assurance service line.<br>The opportunity is specifically in the Audit sub-service line under Assurance.Our tailored external audit services help build trust and confidence through transparency, clarity and consistency. We are 79,000+ professionals based worldwide across 150 countries. Audit services involve reporting on the fairness in all material respects with which a client's audited financial statements are presented, in conformity with the applicable financial reporting framework.<br>We are passionate about making sure the experience you have with us lasts a lifetime. To demonstrate this, we have developed a Graduate Program which offers you a combination of varied on-the-job work experience as well as web based/self-study learnings. The combination of such components will support you in developing your knowledge around the services we offer while building your communication and interpersonal skills. Along the way you will be supported and coached by a team of professionals within your location.<br><strong>What we look for</strong><br><ul><li><strong>You have an agile, growth-oriented mindset.</strong> What you know matters. But the right mindset is just as important in determining success. We're looking for people who are innovative, can work in an agile way and keep pace with a rapidly changing world.</li><li><strong>You are curious and purpose driven. </strong>We're looking for people who see opportunities instead of challenges, who ask better questions to seek better answers that build a better working world.</li><li><strong>You are inclusive.</strong> We're looking for people who seek out and embrace diverse perspectives, who value differences, and team inclusively to build safety and trust.</li><li><strong>Qualifications:</strong></li></ul><ul><li>Bachelor's Degree in Accounting</li><li>GPA 3+ or equivalent</li><li>Bahraini nationals will only be considered.</li><li>Graduated less than 18 months.</li></ul><br><strong>What's in it for you</strong><br><ul><li>Accelerate your technical capabilities and transformative leadership skills with future-focused courses and development programs.</li><li>Broaden your horizons by working on highly integrated teams across the globe and collaborate with people of diverse backgrounds - both professionally and culturally.</li><li>Bring out the best in yourself with continuous investment in your personal well-being and career development.</li><li>Develop your own personal purpose and help us create a positive ripple effect on our teams, our business, clients and society - building a better working world, together.</li></ul><br><strong>What you can expect</strong><br><ul><li><strong>Step 1: Apply</strong></li></ul><br>If you can confidently demonstrate that you meet the criteria above, please complete the online application as soon as possible. Make sure to answer all questions.<br>Make sure you apply early and do not forget to follow the instructions carefully and answer all the questions to ensure your application is successful.<br><ul><li><strong>Step 2: Test</strong></li></ul><br>After we review your application, you will receive an invitation email from 'EY Careers' to complete the EY online assessments. Approach the tests as you would approach any new challenge. It might be tough, but you can do it!<br><ul><li><strong>Step 3: On Demand Interview</strong></li></ul><br>Upon passing the assessments, you will receive an email invitation to complete a prerecorded video interview. You will be required to record yourself responding to behavioral based questions. Being yourself is key to passing this step of the recruitment process.<br><ul><li><strong>Step 4: Attend</strong></li></ul><br>Once you have been shortlisted, you may be invited to attend a recruitment day or an interview. This is your opportunity to visit our office, speak with our people and ask questions about life and work at EY.<br><ul><li><strong>Step 5: Receive</strong></li></ul><br>If you are a great fit for the opportunity, you will receive an offer to join EY and begin your career at one of the best companies to work for. It's time to celebrate.</li></ul><br><b>EY | Building a better working world </b><br>EY is building a better working world by creating new value for clients, people, society and the planet, while building trust in capital markets.<br>Enabled by data, AI and advanced technology, EY teams help clients shape the future with confidence and develop answers for the most pressing issues of today and tomorrow.<br>EY teams work across a full spectrum of services in assurance, consulting, tax, strategy and transactions. Fueled by sector insights, a globally connected, multi-disciplinary network and diverse ecosystem partners, EY teams can provide services in more than 150 countries and territories.<br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>OVERALL PURPOSE OF THE JOB</b></p><p>At Toll, we move the businesses that move the world. Toll manages a range of services on behalf of the Australian Department of Home Affairs in order to support Refugees and Humanitarian clients with the medical assessment process, host country exit formalities and subsequent travel to Australia.</p><p><br></p><p>As a Driver, you will provide direct support to our teams in Amman and Iraq by safely transporting applicants to the airport, hotels, medical clinics and other required locations. You'll assist your colleagues with any issues related to client communication or service delivery, and you will also help the Logistics Coordinator by monitoring services provided in Iraq to ensure they meet our requirements.</p><p><br></p><p>Your responsibilities include maintaining the cleanliness and readiness of your assigned vehicle, following scheduled routes while being adaptable to changes, and assisting passengers with luggage and travel information.</p><p><br></p><p>Additionally, you will be responsible for conducting routine vehicle inspections, reporting maintenance needs promptly, and maintaining accurate logs of travel times, mileage and fuel usage. </p><p><br></p><p>Ensuring smooth accessibility between Erbil, Duhok, Sulaymaniyah, and Baghdad is essential to your role.</p><p><br></p><p><b>ACCOUNTABILITES</b></p><p>The primary accountabilities of the job are:</p><ul><li>Work Independently: You will manage your own daily schedule and be comfortable working on your own, away from your team.</li><li>Resilience: Maintain performance under pressure, opposition or setbacks (such as time pressure or job ambiguity) in diverse and sometimes challenging locations.</li><li> Accountability: Holds self and others accountable to meet commitments.</li><li>Policy Compliance: Adherence to relevant Policies and Procedures.</li><li>Compliance with legislation, rules and regulations.</li><li>Awareness and consideration of political implications and religious sensitivities that apply to clients and their host countries.</li></ul> </div><h2 class="h5">Skills</h2>
<div data-jb-field="skills"><p><br></p><p><b>PRE-REQUISITES:</b></p><p><br></p><p>To succeed in this role, it is expected the successful candidate will have:</p><p><br></p><p>Knowledge/Experience</p><p>• Familiar with traffic rules, driving routes and will assist with other service-related tasks.</p><p>• Good interpersonal skills and can build a good relationship with Suppliers.</p><p>• You communicate clearly in Arabic and Kurdish, with a basic understanding of English.</p><p>• Awareness and consideration of the political implications and religious sensitivities that apply to staff, customers and suppliers in the region of responsibility.</p><p><br></p><p>Technical/Professional Skills required</p><p>• You have a basic knowledge of Microsoft Office, including how to use programs like Microsoft Word and Excel.</p><p><br></p><p>Qualifications</p><p>• Desirable – 5 years of experience as a driver in a relevant field, such as logistics or car rental services.</p><p>• Working with Children certification/Local equivalent.</p><p><br></p><p>Eligibility</p><p>• National Passport and the ability to travel domestically within your region.</p><p>• Candidates must be Iraqi nationals from the Kurdistan Region, currently residing in Erbil, and legally authorized to work in Kurdistan, Iraq.</p><p>• Full Driver’s License, D1 Category.</p><p>• Ability to work flexible hours recognising that some services may be delivered outside of regular business hours (Airport related activities).</p><p><br></p><p><b>ESSENTIAL PERSONAL ATTRIBUTES</b></p><p>Essential attributes for this position are:</p><p>• You will be a motivated professional with a strong ability to form effective working relationships and to deliver high performance outcomes.</p><p>• Ability to work autonomously and independently while maintaining regular, pro-active communications with a regional team.</p><p>• Commitment to collaborative practices.</p><p>• A desire to service the customer and to put their needs first.</p><p>• Excellent communicator who flourishes in a fast-paced environment.</p><p>• Ability to operate in a range of diverse locations and adapt to ever changing environments.</p><p>• Be a strategic thinker who is solutions focused with the ability to problem solve situations at short notice.</p><p><br></p><p><br></p><p><b>KEY PERFORMANCE INDICATORS</b></p><p>Success in this role will be measured through a balance of quantitative and qualitative performance measures/KPIs that are aligned to the job group Key Result Areas which will form part of your annual objectives.</p><p><br></p><p>Putting the Customer First</p><p>Read customer situations accurately, anticipate their business needs and identify opportunities to significantly enhance the breadth and quality of the service experience. Monitor the performance of suppliers, assessing their ability to meet quality and delivery requirements with suppliers in collaboration with other departments.</p><p><br></p><p>Maximising Profitability & Return on Capital</p><p>Maximise profitability through leading the day-to-day performance of an end-to-end work or operational process.</p><p><br></p><p>Operational Excellence</p><p>Conduct appropriate planning and demand management in a practical way to keep operations running smoothly and help reduce costs. This includes planning your trips effectively, working closely with the team, and always looking for ways to improve how things are done, while staying safe and protecting the environment.</p><p><br></p><p>Strategy & Capability</p><p>Follow the supply chain plan to make sure deliveries are on time and meet customer expectations.</p><p><br></p><p>Growth & Innovation</p><p>Look for better ways to do the job and help the team grow by using new ideas.</p><p><br></p><p>AREA OF RESPONSIBILITY</p><p>• Iraq.</p><p>• Travel (Domestically) is required.</p><p><br></p><p>MANAGEMENT RESPONSIBILITY</p><p>• Employees</p><p>No. of direct reports: Nil</p><p>No. of indirect reports: Nil</p></div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>
<span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision:</p><br>
<ul>
<li>Leverages various data sources including project's approved business case, baselines, management plans, Open Wells reports, financials, and resources consumption/utilization.</li>
<li>Meticulously measures, analyzes, and interprets variances and trends across key project control areas (scope, schedule, cost, and risk) to showcase operational and financial performance.</li>
<li>Collaborates with project team and stakeholders to identify areas of improvement and develop action plans that address issues' root cause(s) and maximize cost savings and PSL pull-throughs.</li>
<li>Provides insightful analysis that support project manager and senior leadership in decision-making and development of strategies aimed to improve operational efficiency, mitigate risks, and maximize profitability in addition to shaping long-term and future bid's strategies.</li>
</ul> <p><strong>Additional Role Responsibilities:</strong><br> <br>The Project Services Lead (PSL) oversees the work of the Project Cost Engineer, Project Planner/Scheduler, Document Controller and Project Estimator.</p><br>
<p>The PSL is responsible to the Project Director for the quality, timeliness, and content of the effort carried out by these project support personnel, together with: </p><br>
<p><br>• Develop and maintain the EPCM Contract Project Controls Plans, own the controls processes and ensure all project staff are aware of their responsibilities. <br>• Development Project Controls Plan covering the above discipline and implementation of the plan <br>• Preparation of both the client’s and internal project reports. <br>• Provide support to Client on all the assurance, verification work that as requested <br>• Establishment of the project man-hour control system and the maintenance of the system. <br>• Establishment of the project cost control system and management of the system covering all the cost control processes and alignment activities. <br>• Preparation and verification of the monthly invoices. <br>• Checking of the incoming invoices from the work share offices <br>• Establishment of the project planning system and management of the system covering all the cost project planning processes, management of all the project plans and alignment activities. <br>• Establishment of the project cost estimation system and management of the system covering all the cost estimation processes including benchmarking and alignment activities. <br>• Identify, implement and maintain the complete controls structure, tools and procedures needed for the projects based on the contracting strategy, execution plan and the risks identified; <br>• Own and manage the project’s EPCM Contract Management of Change (MOC) process; <br>• Own and manage the EPCM Contract project’s risk management process; <br>• Responsible in ensuring the alignment of project information and data in the development of project services deliverables <br></p><br><br><br><b>Qualifications</b> <br><ul>
<li>Requires expertise on well engineering with operational focus on offering financial, contractual and project-based guidance.</li>
<li>Requires an undergraduate STEM degree with 6+ years' experience (Operations and Engineering).</li>
<li>Exposure to multi-discipline operations is preferred.</li>
</ul> <p><strong>Preferred Experience:</strong><br> <br>• Minimum 15 years experience in Oil and Gas Industry. 7 years in Lead roles managing a PS team <br>• Minimum 10 years experience in Oil and Gas related project delivery <br>• Minimum 5 years experience in Oil and Gas Project Delivery as a Umbrella Contract Project Services Lead <br>• Experience in cost control, cost estimating, project scheduling and risk management and alignment of these disciplines <br>• Experience in portfolio management of projects <br>• Experience in managing resources in a multidiscipline team <br>• Preferable membership in a Project services related association </p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br>
<p>Oils Opertion ST,N°29 Burjesia, Basra, Basrah, 61006, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br>
<p><strong>Requisition Number:</strong> 211580 <br><strong>Experience Level: </strong>Experienced Hire <br><strong>Job Family:</strong> Support Services <br><strong>Product Service Line: </strong>Halliburton Project Management <br><strong>Full Time / Part Time: </strong>Full Time</p><br>
<p><strong>Additional Locations for this position: </strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br>
</div>
Receive email alerts for Factory Jobs jobs
You can cancel your email alert at anytime