Optometrist Jobs - Basra Iraq

<p>Job Responsibilities</p><p>&nbsp;</p><p>1. Reservoir Performance Analysis and Monitoring</p><p>• Monitor the production performance of oil wells and reservoirs; prepare periodic reservoir performance analysis reports.</p><p>• Analyze the effectiveness of water injection; optimize water injection schemes, adjust zonal injection structures, and maintain injection-production balance.</p><p>• Evaluate the production capacity of individual wells; identify low-producing, water-producing, or anomalous wells in a timely manner and provide evidence-based recommendations for well interventions or workovers.</p><p>&nbsp;</p><p>2. Numerical Simulation and Development Planning</p><p>• Build and maintain geological and numerical reservoir simulation models (using software such as Eclipse, tNavigator, or Petrel).</p><p>• Conduct history matching and forecast production trends under various development strategies.</p><p>• Prepare Oilfield Development Plans (ODP), design supplementary development adjustments, and draft proposals for new well construction.</p><p>&nbsp;</p><p>3. Testing and Data Acquisition Design</p><p>• Design and review programs for well testing, trial production, pressure monitoring (PBU/RFT/MDT), and fluid property (PVT) analysis.</p><p>• Interpret and evaluate well test data to derive key parameters such as formation pressure, permeability, and skin factor.</p><p>&nbsp;</p><p>4. Reserves and Asset Management</p><p>• Evaluate, calculate, and report remaining oilfield reserves in accordance with international standards (e.g., SPE-PRMS).</p><p>• Conduct in-depth research on the distribution of remaining oil to identify potential recovery opportunities within the field, including both peripheral and internal areas.</p><p>&nbsp;</p><p>5. Cross-functional Collaboration and Communication</p><p>• Collaborate closely with geology, drilling, production/completion, and surface facilities teams to ensure the successful implementation of development plans.</p><p>• Present technical proposals for review and approval.</p><p>&nbsp;</p><p>Qualifications</p><p>1. Education and Work Experience</p><p>• Bachelor’s degree or higher in Petroleum Engineering, Oil and Gas Field Development Engineering, or a related discipline.</p><p>• At least 8 years of experience in reservoir engineering within an oil company or oilfield service company (experience with carbonate, heavy oil, or low-permeability reservoirs is preferred). • Prior work experience on projects in the Middle East, or familiarity with oil fields in Iraq (such as Rumaila, West Qurna, Halfaya, Majnoon, etc.), is preferred.</p><p>&nbsp;</p><p>2. Professional Skills</p><p>• Proficient in core reservoir engineering software, including Eclipse, tNavigator, Petrel RE, Kappa (Saphir/Topaze), Prosper/GAP, OFM, etc.</p><p>• Possess a solid foundation in material balance, production decline analysis, and well test interpretation.</p><p>• Familiar with international reserve evaluation standards (PRMS).</p><p>&nbsp;</p><p>3. Language and Soft Skills</p><p>• Capable of using English as a working language, with the ability to fluently draft technical reports and deliver oral presentations in English (proficiency in Arabic is an advantage).</p><p>• Strong cross-cultural communication skills, resilience under pressure, and a collaborative team spirit.</p><p>&nbsp;</p><p>4. Adaptability to Work Environment</p><p>• Able to adapt to a rotational work schedule at field sites in Iraq.</p><p>• In good physical health and capable of adapting to the hot climate of the Middle East and the specific security/camp environment.</p>

<p>Provides leadership and management to AMBP s guard force the ensuring the effective provision of security to facilities resident sand stakeholders. Regularly assesses and performance manages his team the guard force at AMBP; identifying any gaps in an individual s capability and providing relevant training to help them improve. Provides training and mentoring to the local guard force as specified by Control Risks and the AMBP hierarchy commensurate with the minimum standards required and exceeding them wherever possible. Ensures that the guard force at AMBP comply with Control Risks policies such as Anti-Bribery and Corruption and Voluntary Principles on Human Rights. Enforces minimum standards in all security duties including static guarding, access control, communications procedures and weapon handling. Records the allocation of resources to the local guard force and ensures these are well maintained and used effectively. Implements and maintains accurate training records for employees. Acts as advisor on all aspects of security to the AMBP hierarchy, where appropriate. Identifies non-compliance with Control Risks and / or Client s policies and procedures and escalates through management appropriately. Assesses the security situation as it applied to the Client s sites and areas of operations and works with the regional management team to make recommendations in line with the current intelligence and analysis. Identifies the conditions that will influence the physical safety of the Client s personnel and their operations and liaises with the management team in order to aid strategic operational decision-making.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 5 years Military or Policing experience. Minimum 2 years hostile environment experience. Experience of managing local national personnel in a hostile environment. Experience of working in a client facing role in a hostile environment. Demonstrable understanding of Control Risks organisational policies and SOPs. Fluency in English Language (CEFR C2 or equivalent). Proficient in the use of Microsoft Word, Power Point &amp; Excel.</p><h4>Qualifications and specialist skills</h4><ul><li>Minimum of an accredited L3 Close Protection certification</li><li>Minimum of FPOS IV/ FREC medical certification</li><li>Project Management Qualification (PRINCE 2, PMP, Agile, MSP etc)</li><li>Occupational Health &amp; Safety Certification (IOSH, NEBOSH etc)</li><li>Minimum of an accredited L4 Security Management certificatio</li></ul>

<p>Job Overview&nbsp;</p><p><br></p><p>&nbsp;</p><p><br></p><p>The ALS Field Specialist IV (Senior) is responsible for leading and supervising Artificial Lift Systems (ALS) field operations, with a primary focus on Surface and Downhole Jet Pump systems. The role ensures safe, efficient, and high-quality service delivery to customers while maintaining full compliance with QHSE standards and company procedures. The ALS Field Supervisor oversees field personnel, equipment readiness, job execution, client support, operational performance, and workforce development, while serving as the key field representative for ALS operations.</p><p><br></p><p>&nbsp;</p><p><br></p><p>Responsibilities:</p><p><br></p><p>&nbsp;</p><p><br></p><p>Lead and supervise ALS field operations, including Surface and Downhole Jet Pump installations, interventions, maintenance, and troubleshooting activities.</p><p><br></p><p>Ensure all operations are executed safely, efficiently, and in compliance with Weatherford and customer requirements.</p><p><br></p><p>Plan, coordinate, and monitor field activities, personnel utilization, equipment readiness, and operational resources.</p><p><br></p><p>Provide technical support, operational guidance, and problem-solving expertise for ALS projects and field operations.</p><p><br></p><p>Train, mentor, and evaluate field engineers and local personnel to enhance technical competency and operational readiness.</p><p><br></p><p>Maintain strong relationships with customers and support business development activities through technical presentations and client engagement.</p><p><br></p><p>Coordinate equipment mobilization, maintenance, inventory management, and operational reporting.</p><p><br></p><p>Lead safety initiatives, toolbox talks, incident reporting, risk assessments, and continuous improvement programs.</p><p><br></p><p>Support engineering studies, operational analysis, technical reporting, and project coordination activities.</p><p><br></p><p>Ensure operational performance targets, service quality standards, and business objectives are achieved.</p><p><br></p><p>&nbsp;</p><p><br></p><p>Skills:</p><p><br></p><p>Strong knowledge of Surface and Downhole Jet Pump systems and ALS operations.</p><p><br></p><p>Proven leadership, crew supervision, and workforce development capabilities.</p><p><br></p><p>Excellent troubleshooting, problem-solving, and decision-making skills.</p><p><br></p><p>Strong understanding of QHSE, risk management, and operational compliance requirements.</p><p><br></p><p>Effective customer relationship management and communication skills.</p><p><br></p><p>Proficiency in Microsoft Office applications and ERP systems such as JD Edwards.</p><p><br></p><p>Experience with ALS design and simulation software, preferably JEMS and WellFlo.</p><p><br></p><p>Ability to manage multiple priorities in a dynamic field environment.</p><p><br></p><p>Strong organizational, planning, and reporting capabilities.</p><p><br></p><p>Ability to work independently and lead operations under challenging field conditions.&nbsp;</p><p><br></p><p>&nbsp;</p><p><br></p><p>Qualifications:</p><p><br></p><p>&nbsp;</p><p><br></p><p>Required</p><p><br></p><p>Bachelor’s degree in engineering or a related discipline.</p><p><br></p><p>Minimum 10 years of hands-on Artificial Lift Systems experience, including Surface and Downhole Jet Pump operations.</p><p><br></p><p>Experience supervising field personnel and leading operational activities.</p><p><br></p><p>Good English communication skills, both written and verbal.</p><p><br></p><p>Strong knowledge of safety management systems, QHSE standards, and oilfield operations.</p><p><br></p><p>Proficiency in Microsoft Office Suite and business systems.</p><p><br></p><p>Medically fit and able to work rotational field assignments.</p><p><br></p><p>Preferred</p><p><br></p><p>Experience working in high H₂S oil and gas environments.</p><p><br></p><p>Project-based operational experience with multiple concurrent activities.</p><p><br></p><p>Experience training, coaching, and mentoring field engineers and technicians.</p><p><br></p><p>Working knowledge of JEMS, WellFlo, and JD Edwards systems.</p><p><br></p><p>Exposure to business development, customer engagement, and technical presentation activities.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p> <strong>Job Purpose</strong> </p> <p>The Team Leader (TL) has a significant impact on how potential clients assess Control Risks capabilities. The TL is responsible for setting and maintaining the highest standards of team presentation and capability to the client, and will coordinate the direction and management of the team. The TL ensures that the team meets all operational and training standards with assistance from the training team and that the team is fully compliant with Control Risks standard operating procedures (SOPs) and doctrine at all times. The TL assists in mission planning for all tasks as detailed by the Operations Manager. The TL is responsible for the professional delivery of operational briefs to both the team and clients when required. </p> <p> <strong>Roles tasks and responsibilities</strong> </p> <ul> <li>Demonstrates competence in Control Risks SOPs and personal skills</li> <li>Displays client etiquette, discipline and maintain Control Risks low profile approach</li> <li>Remains informed about the threats and key issues in Iraq</li> <li>Conducts vehicle and dismounted contact and immediate action drills</li> <li>Maintains advanced first aid skills</li> <li>Possesses competent navigation skills including map-reading, compass and use of GPS</li> <li>Uses vehicle-mounted and handheld communications systems</li> <li>To be fully conversant and comply with Rules for the Use of Force (RUF)</li> <li>Maintains competence in all required skills through regular formal assessment </li> </ul> <p> <strong>Management responsibilities</strong> </p> <ul> <li>Conducts certifiable instruction in all relevant operational and medical team requirements in accordance with Control Risks training directives</li> </ul> <ul> <li>Ensures the team maintains a professional approach, appropriate client etiquette, discipline and presentation</li> <li>Ensures that the team conducts effective administration, including vehicle maintenance, equipment husbandry/accountability and reports and returns </li> </ul> <p> <strong>Operational responsibilities</strong> </p> <ul> <li>Assists in conducting risk assessments and operational planning</li> <li>Issues orders to team members and brief clients in line with SOPs when required</li> <li>Conducts venue and route recces and produce reports</li> <li>Commands the team and issue direction to clients</li> <li>Provides emergency medical and primary health </li> </ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>Essential</strong> </p> <ul> <li>Completion of Control Risks recruitment and selection process, including a pass on the HECPO course</li> <li>Completion of Close Protection course</li> <li>Familiarity and comfort with Microsoft Office suite of applications</li> <li>Fit and active to work in a hostile environment where there are limited medical facilities</li> <li>A minimum of 5 years of military / police experience </li> <li>A minimum of 2 years of experience working in a PSD capacity in Iraq</li> <li>12 months of commercial APT operational experience in Iraq</li> <li>Available to deploy within 6-8 weeks of hire</li> </ul> <p> <strong>Preferred</strong> </p> <ul> <li>Certified training instructor CTTLS, PTLLS or equivalent BTEC</li> <li>Ex-military JNCO or equivalent</li> <li>Training in leadership skills and performance management</li> <li>Knowledge of and exposure to oil and gas sector</li> </ul> <p> <strong>Qualifications and specialist skills</strong> </p> <ul> <li>If not from a country where English is the official language, the candidate will provide proof (dated within the last 2 years) of language ability based on the TOEFL testing process with score of 110 or above or the IELTS of 8 or above</li> <li>Valid SIA Frontline Close Protection Licence</li> <li>Valid certificate for FPOS-I Level 4 and/or FREC Level 3 </li> </ul>

<p><br></p><p> <strong>Rotation:</strong> 5 days on 2 days off</p> <p> <strong> The role </strong> </p> <p>This is an exciting opportunity for an experienced <strong>Chemical QAQC Engineer</strong> to join our Iraq Business Unit.</p> <p> <strong>Our Clients and Projects </strong> </p> <p> <strong>Designing the future. Transforming the world. </strong> </p> <p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. </p> <p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p> <p> </p> <p> <strong> What we can offer </strong> </p> <ul> <li> <strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li> <strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li> <strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li> <strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li> <strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li> <strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li> <strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones </li> </ul> <p> </p> <p> <strong> Job Objectives: </strong> </p> <p>Responsible for quality monitoring, inspection, analysis, evaluation, and continuous improvement of crude oil, water, and production chemicals during oilfield production operations. This covers the entire process from incoming materials, storage, handling, dilution, injection, and field application to delivery. Through quality data analysis, abnormal-condition closed-loop management, standard compliance, and cross-functional collaboration, the role ensures stable production, qualified product delivery, process optimization, and HSE compliance.</p> <p> </p> <p> <strong>Chemical Quality Inspection &amp; Verification: </strong> </p> <ul> <li>Carry out quality inspection and verification for incoming production chemicals by reviewing certificates, technical specifications, batch consistency and packaging integrity</li> <li>Perform sampling, testing and acceptance in compliance with company procedures and applicable standards; ensure only qualified chemicals are approved for field application</li> <li>Monitor chemical quality throughout storage, handling, dilution, injection and field application</li> </ul> <p> <strong>Process Quality Control</strong> </p> <ul> <li>Inspect storage conditions, shelf life, dosing practices and chemical performance. Timely identify quality deviations or application related issues to guarantee safe and effective chemical utilization</li> </ul> <p> <strong>Quality Data Management &amp; Analysis</strong> </p> <ul> <li>Maintain complete records for inspection results, laboratory reports and quality related data. Analyze chemical quality trends, batch consistency and field performance. Prepare quality reports and provide recommendations to improve chemical selection, procurement specifications and application programmers</li> </ul> <p> <strong>Quality Issue Investigation &amp; Corrective Actions</strong> </p> <ul> <li>Investigate chemical quality issues raised from inspections or field operations</li> <li>Co operate with suppliers, laboratory staff and technical teams to identify root causes, implement corrective actions, verify effectiveness and maintain closed loop quality management</li> <li>Implement corporate QA/QC procedures, inspection standards and operational practices. Support development and continuous improvement of chemical quality standards, participate in audits and compliance reviews, make sure all quality activities are standardised, traceable and compliant</li> </ul><p><strong>Desired Candidate Profile</strong></p><p><br></p> <p> <strong>Expected:</strong> </p> <ul> <li>Bachelor s degree in chemistry or related field; Master s degree preferred. Solid academic background. </li> <li>Sound knowledge on crude oil processing chemical treatment, water treatment, production stimulation, chemical selection &amp; treatment, upstream related laboratory analytical methods and chemical management.</li> <li>Relevant HSE, process safety, operations or technical certifications in accordance with company requirements.</li> <li>Minimum 5+ years oil field working experience with chemical management background from IOCs or specialist chemical supply companies. Willing to spend 30 40 % of working time in the field.</li> </ul>

<p><h4>Role purpose</h4> <p>The Wells AAD is a mobile Control of Work focal point for workover rigs and well services activities. The role focuses on forward planning and work readiness, connecting Wells schedules with station permit and isolation preparation to reduce avoidable non productive time while ensuring compliant execution and responsive support for emergent work.</p> <h4>Scope and authority</h4> <p>This is a roving Wells-facing role, not a routine degassing-station operations position. The Wells AAD coordinates with station teams but does not replace the Site Controller, station Area Authority or Isolating Authority, or independently authorise station isolations. Formal AA or permit decision rights apply only where the individual has been specifically appointed and authorised under ROO CoW requirements.</p> <h4>Lookahead, planning and readiness</h4> <ul> <li>Engage routinely with Workover and Well Services Superintendents, Coordinators and planning personnel to review upcoming jobs, rig movements and rolling lookahead schedules.</li> <li>Identify upcoming Control of Work requirements early, including permits, HITRAs, isolation plans, certificates, SIMOPS interfaces, site access and prerequisite approvals.</li> <li>Coordinate with relevant stations, Site Controllers, Area Authorities and isolation teams to confirm that permit and isolation preparations are progressing in advance of workover rig or well services arrival.</li> <li>Maintain a visible readiness / action tracker for upcoming work; follow up gaps, escalate blockers promptly and flag likely NPT exposure before mobilisation.</li> <li>Support rapid reprioritisation for production-critical and emergent well services jobs without bypassing risk assessment, permit or isolation requirements.</li> </ul> <h4>Mobile field execution and worksite verification</h4> <ul> <li>Travel between workover rig and well services locations as operational priorities require, including well services activities, to provide on-the-ground CoW support.</li> <li>Before work starts, verify that the planned scope matches the permit and HITRA; review changes in location, equipment, hazards or simultaneous activities with the relevant authorities.</li> <li>Coordinate on location with the Workover Supervisor / WSL or Well Services Supervisor, Performing Authority and station team to resolve CoW questions and readiness issues.</li> <li>Approving the HITRAs and drafting isolations and field application of the associated ICCs as required for upcoming well activities.</li> <li>Participate in worksite visits, pre-job discussions, toolbox talks and field verification; intervene and escalate if conditions or work scope exceed the approved controls.</li> <li>Help secure timely permit amendments, revalidation or additional isolations where scope or conditions change, using the proper authorisation route.</li> </ul> <h4>Coaching, assurance and improvement</h4> <ul> <li>Coach Wells and station personnel on clear work scopes, fit-for-purpose HITRAs, permit quality, isolation interfaces and SIMOPS during well interventions.</li> <li>Check WorkSafe permit status and supporting documentation, challenge incomplete submissions and support responsible personnel to correct them.</li> <li>Record root causes and trends in permit/isolation delays, share lessons with Wells and CoW leadership and propose practical improvements to the lookahead and readiness process.</li> <li>Support agreed competency verification, field audits and CoW assurance activities, including checks that completed work is closed and handed back through the accountable authority.</li> </ul> <h4>Key working interfaces</h4> <ul> <li>Workover and Well Services Superintendents and Coordinators: lookahead, priorities, mobilisation sequencing and emergent jobs.</li> <li>Workover Supervisor / WSL and Well Services Supervisor: work scope, location readiness, toolbox talks and changed conditions during execution.</li> <li>Site Controller, station AA, Operations Advisor, Isolating Authority and relevant electrical authority: permit preparation, isolation readiness and operational interfaces.</li> <li>Performing Authorities and contractors: permit/HITRA quality, pre-job verification and compliance.</li> <li>CoW Team Leader and Specialist: obstacles, NPT trends, assurance findings and continuous improvement.</li> </ul> <h4>Experience, qualifications and skills</h4> <ul> <li>At least five years of relevant hydrocarbon operations and/or Control of Work experience, with practical knowledge of PTW, HITRA, energy isolation and SIMOPS.</li> <li>Working knowledge of well intervention, workover and well services activities, particularly slickline, e-line and rig mobilisation interfaces, is strongly preferred.</li> <li>Previous experience as an Area Authority, Site Controller or CoW practitioner/coach is desirable; demonstrated ability to operate within defined delegated authority.</li> <li>Strong communication, coordination, coaching and influencing skills, with the confidence to challenge unsafe or inadequately prepared work.</li> <li>Ability to work independently, prioritise competing demands and use WorkSafe and associated digital systems effectively.</li> <li>Relevant HSE/technical qualification or equivalent applicable experience; Arabic and English communication skills appropriate for the position.</li> </ul> <h4>Performance measures</h4> <ul> <li>Percentage of planned Wells activities confirmed permit/isolation-ready before planned mobilisation.</li> <li>Permit- and isolation-related NPT trends for workover and well services activities.</li> <li>Timely closure/escalation of readiness actions and responsiveness to emergent work.</li> <li>Quality of worksite scope verification, coaching, documented learning and CoW compliance.</li> </ul> <h4>Systems and standards</h4> <p>Competent use of WorkSafe and relevant ROO CoW procedures, including HITRA, permit-to-work, energy isolation and SIMOPS requirements. Use Maximo, ShareCat, SharePoint, GIS and drawing mark-up tools where needed for the assigned work.</p></p><p></p>

<p><strong>JOB PURPOSE</strong></p><p>The Advocacy and Communications Specialist provides strategic leadership and technical guidance across advocacy and communications for the Response/National Office The role ensures the development and delivery of key advocacy and high-quality communications resources for donor and public engagement; position the ministry of World Vision with in-country and international media if and when directed by the Liaison Advisor; support external communications on a range of development and advocacy priorities; support the operations of social media platforms and engagement; assist in the development of capacity amongst staff on creating communication content; and support internal/employee communications processes which support and advance the strategic goals of the Response/National Office and its core ministry functions.</p><p><strong>Key Responsibilities</strong></p><p><strong>Content production</strong></p><ul><li>Develop and lead the implementation of the communications and visibility plan</li><li>Production of compelling evidence-based and issues-oriented fundraising, advocacy and</li><li>publicity materials (web-based, digital, print and video) for effective donor (including grant acquisition) and public engagement both in-country and internationally, and in collaboration with other World Vision Offices if/as appropriate.</li><li>Edit and produce video content and design visual communications materials, including social media assets, graphics, publications, presentations and other branded products, in line with World Vision brand and visibility standards. Contribute to the consistent and timely offering and development of resources.</li><li>Ensure that stories, photos and other materials are produced to standards of quality required for informing, educating and engaging donors and public audiences via partnership websites, magazines, adverts, donor appeals, media releases and other communications channels and outlets.</li><li>Hosting the partnership resource gathering visits/ Media</li><li>Lead and support communications during slow- and rapid-onset emergencies, ensuring the World Vision Partnership receives timely, high-quality stories, photos, videos, media interviews and other field content.</li><li>Build communications understanding and capacity amongst field staff, including guidance on storytelling, content gathering, visibility, consent and safeguarding.</li><li>Assist with translation, interpretation and transcribing interviews interviews and communications materials</li></ul><p><strong>Media and social media</strong></p><ul><li>Develop and implement social media plan</li><li>Assist with selection, set-up, and running of social media channels to initiate discussions around WV activities amongst target audiences, ensuring content is regularly updated to maintain engagement, raise the page's profile, and enhance its relevance</li><li>Lead the development of contacts with country-level media; regional media and international media to earn coverage of World Vision. Support in press releases and stories shared in media</li><li>Support the monitoring of national media and use of media tracking through Cision and establish the overall capacity of NO to initiate and respond to media contacts with required speed and skill.</li><li>Monitor the external communication resources for correct use of WV identity.</li><li>Collaborate with Senior Leadership team on supporting key advocacy issues, messaging, and communications channels for public advocacy initiatives. Engage media to gain exposure and credibility and increase public discussion.</li><li>Provide communications support reflected in applicable regional and global advocacy campaigns.</li></ul><p><strong>Strategy and global campaigns</strong></p><ul><li>Collaborate with MEERO Advocacy &amp; Comms Focal points on strategy formulation and implementation of field office plans.</li><li>Work collaboratively with relevant teams in Response/NO and throughout the Partnership towards realization of Response/NOs mission.</li><li>Review and update annual comprehensive and context-specific advocacy implementation plans for World Vision Iraq developed, reviewed, and approved, with a clear implementation roadmap outlining priorities, timelines, roles, and accountability mechanisms.</li><li>Strengthened organizational alignment on advocacy priorities through stakeholder consultations, revisions based on SLT/SMT feedback, and successful presentation and endorsement of the final strategy.</li><li>Create and manage a network of freelancers to assure some resource generation is outsourced, in collaboration with Regional Advocacy and Comms Team</li><li>Innovation leveraging technology for strategy advocacy and communication</li><li>Collaborate with stakeholders in office to complete WV partnership checklists and reporting requirements Advocacy checklists, Advocacy result area templates etc.</li><li>Support scale-up of innovation and digitization of advocacy and communication initiatives relevant to the context.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Bachelor Journalism, RadioTv, - Communications or any related field.</li><li>Demonstrated experience in development of communications content</li><li>Experience in the production of diverse communications resources such as publications, multi-media, websites/pages, photo and video reports, social media, etc.</li><li>Cross-cultural communication skills. Able to travel and work in the field as an essential function of the position</li><li>Strong journalistic and technical photo, video and video editing, storytelling and social media skills</li><li>Experience or familiarity with marketing departments is an asset</li><li>Ability to work in difficult, insecure, rapidly changing, and stressful conditions.</li><li>At least two years professional experience in journalism or public relations.</li></ul><p><strong>Required</strong> <strong>Language(s):</strong></p><ul><li>Fluent in Arabic, Kurdish and English</li></ul><p><strong>Required</strong> <strong>travel and/or work environment accommodations:</strong></p><ul><li>Minimum 50% time traveling in the field</li></ul><p><strong>Position s physical requirements:</strong></p><ul><li>Position requires willingness and ability to continue to function during a crisis situation, including during a World Vision response to a manmade or natural disaster</li></ul>

<p>Wood is recruiting for a <strong>Maintenance Mechanical Rotating Engineer</strong> Field to join its Iraq business unit focusing on executing and coordinating field maintenance activities for rotating equipment to ensure work is performed safely, correctly, efficiently, and in accordance with approved technical requirements.</p> <p>This role is a full-time on-site role in Basra, Iraq.<br> <strong>Rotation: </strong>6 days on 1 day off </p> <p><br></p> <p> <strong>Expected:</strong> </p> <ul> <li>Bachelor s degree in mechanical engineering or related engineering discipline. </li> <li>Good practical knowledge of rotating equipment maintenance and field troubleshooting. </li> <li>Basic knowledge of rotating machinery operation, maintenance requirements, and applicable technical standards. </li> </ul> <p> <strong>Professional Certifications: Preferred (Advantage/Not Mandatory):</strong> </p> <ul> <li>Vibration Analysis ISO Category I/II. </li> <li>Rotating Equipment Maintenance / Alignment Certification. </li> <li>RCA / Failure Analysis training. </li> <li>Relevant HSSE certification.</li> </ul> <p> </p> <p> <strong>Work Experience</strong> </p> <ul> <li>Minimum 3 years of relevant Mechanical / Rotating Equipment maintenance experience, preferably within oil &amp; gas, petrochemical, power generation, or similar industrial/process facilities. </li> <li>Practical field experience with rotating equipment such as pumps, compressors, gearboxes, and associated components. </li> <li>Basic practical understanding of bearings, mechanical seals, couplings, lubrication systems, and alignment. </li> <li>Experience in preventive and corrective maintenance and basic rotating equipment troubleshooting. </li> <li>Exposure to equipment overhaul, inspection, alignment, and commissioning is preferred. </li> <li>Exposure to coordinating technicians and/or contractor personnel during field maintenance execution is preferred.</li> </ul> <p> <strong>Technical Competencies</strong> </p> <ul> <li>Rotating Equipment Field Maintenance </li> <li>Pumps and Compressors </li> <li>Basic Breakdown Troubleshooting </li> <li>Mechanical Inspection </li> <li>Basic Alignment and Coupling </li> <li>Bearings and Mechanical Seals </li> <li>Lubrication Systems </li> <li>Preventive and Corrective Maintenance </li> <li>Equipment Assembly and Installation </li> <li>Field Work Coordination </li> <li>Technical Reporting </li> <li>Permit to Work and Risk Assessment</li> </ul> <p> </p> <p> <strong>Systems Knowledge</strong> </p> <ul> <li>Basic familiarity with CMMS; Maximo experience is preferred. </li> <li>Microsoft Office Applications </li> <li>Exposure to relevant maintenance, planning, reliability, or condition monitoring systems is an advantage.</li> </ul> <p>Wood is recruiting for a <strong>Maintenance Mechanical Rotating Engineer Field</strong> to join its Iraq business unit focusing on executing and coordinating field maintenance activities for rotating equipment to ensure work is performed safely, correctly, efficiently, and in accordance with approved technical requirements.</p> <p>This role is a full-time on-site role in Basra, Iraq.<br><br></p><ul> </ul> <p> </p> <p> <strong> Job Objectives: </strong> </p> <p>Execute and coordinate field maintenance activities for rotating equipment to ensure work is performed safely, correctly, efficiently, and in accordance with approved technical requirements. Act as the field execution owner and first-line technical responder for rotating equipment maintenance and breakdowns, providing hands-on technical oversight, rapid troubleshooting, maintenance quality assurance, and accurate field-validated information to support operational and management decisions. Translate approved maintenance strategy and engineering requirements into high-quality field execution while ensuring accurate as found/as-left documentation, equipment readiness, and effective coordination between Maintenance, Operations, Planning, contractors, and supporting disciplines.</p> <p> </p> <p> <strong>Lead Field Execution &amp; Technical Oversight</strong> </p> <ul> <li>Lead and coordinate field execution of preventive, corrective, predictive, and breakdown maintenance activities for rotating equipment. </li> <li>Provide hands-on technical guidance during equipment dismantling, inspection, overhaul, alignment, mechanical seal replacement, assembly, installation, and commissioning. </li> <li>Ensure maintenance activities comply with OEM requirements, approved job plans, procedures, and technical requirements. </li> <li>Verify field conditions and identify technical or execution constraints before and during maintenance activities.</li> <li>Coordinate technicians and contractor personnel assigned to rotating equipment activities.</li> <li>Monitor field progress and immediately escalate significant technical, resource, or operational constraints.</li> </ul> <p> </p> <p> <strong>Respond to Breakdowns &amp; Troubleshoot Equipment</strong> </p> <ul> <li>Act as the first-line Mechanical technical responder for rotating equipment breakdowns and abnormal operating conditions. </li> <li>Conduct on-site inspection and troubleshooting to identify probable failure modes and determine immediate maintenance requirements.</li> <li>Assess abnormal vibration, noise, leakage, temperature, lubrication, mechanical seal, bearing, coupling, and other equipment conditions. </li> <li>Implement appropriate corrective actions within established technical procedures and authority. </li> <li>Escalate complex, recurring, or high-risk technical issues with clear fact-based findings to the Section Head and relevant technical specialist.</li> <li>Support safe and timely restoration of equipment to operational service.</li> </ul> <p> </p> <p> <strong>Ensure Maintenance Quality Assurance</strong> </p> <ul> <li>Verify critical maintenance steps including alignment, lubrication, flushing, torqueing, clearances, mechanical seal installation, bearing installation, and pre-start checks as applicable. </li> <li>Confirm that required measurements, inspection results, and acceptance criteria are properly recorded.</li> <li>Inspect as-found and as-left equipment conditions. </li> <li>Identify execution or workmanship gaps and initiate corrective actions. </li> <li>Verify mechanical readiness following maintenance and prior to equipment handover to Operations.</li> <li>Participate in equipment trial runs and post-maintenance performance verification.</li> </ul> <p> </p> <p><b>e</b></p><p><strong>Desired Candidate Profile</strong></p><ul> <li>Bachelor s degree in mechanical engineering or related engineering discipline. </li> <li>Good practical knowledge of rotating equipment maintenance and field troubleshooting. </li> <li>Basic knowledge of rotating machinery operation, maintenance requirements, and applicable technical standards. </li> </ul> <p> <strong>Professional Certifications: Preferred (Advantage/Not Mandatory):</strong> </p> <ul> <li>Vibration Analysis ISO Category I/II. </li> <li>Rotating Equipment Maintenance / Alignment Certification. </li> <li>RCA / Failure Analysis training. </li> <li>Relevant HSSE certification.</li> </ul> <p> <strong>Work Experience</strong> </p> <ul> <li>Minimum 3 years of relevant Mechanical / Rotating Equipment maintenance experience, preferably within oil &amp; gas, petrochemical, power generation, or similar industrial/process facilities. </li> <li>Practical field experience with rotating equipment such as pumps, compressors, gearboxes, and associated components. </li> <li>Basic practical understanding of bearings, mechanical seals, couplings, lubrication systems, and alignment. </li> <li>Experience in preventive and corrective maintenance and basic rotating equipment troubleshooting. </li> <li>Exposure to equipment overhaul, inspection, alignment, and commissioning is preferred. </li> <li>Exposure to coordinating technicians and/or contractor personnel during field maintenance execution is preferred.</li> </ul>

<p>Wood is recruiting for an HSE Lead to join its Iraq business unit focusing on supporting the delivery of HSE activities as part of a broader asset Safety management program for major oil and gas operating assets. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement.</p><p>The role</p><p>This is an exciting opportunity for an experienced HSE Lead to join our Iraq Business Unit.</p><p>Our Clients and Projects</p><p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><p>Job Objectives:</p><p>The HSE Lead will support the delivery of HSE activities as part of a broader asset Safety management programme for major oil and gas operating assets. The role will be responsible for undertaking HSE assessments, supporting Safety studies, developing technical deliverables and providing engineering expertise to multidisciplinary teams involved in the operation and maintenance of oil and gas facilities. The successful candidate will work as part of Wood's Iraq team and contribute to the ongoing Saftey, reliability and performance of critical production assets.</p><p>Core Responsibilities:</p><ul><li>Review and acceptance of the Contractors HSE plan.</li><li>Ensure the implementation of the Project HSE Management System (plans, procedures and specifications) and Contractual Security Requirements for all aspects of the work.</li><li>Ensure that Operational HSE requirements are fully addressed in all aspects of design and that the design complies with TOTAL HSE Company Rules and General Specifications.</li><li>Maintain a high awareness of industry and professional best practices.</li><li>Provide specialist advice, supports and technical assistance to the Project Manager and Construction Manager on HSE matters.</li><li>Monitor the DBOOM contractor, Pipeline installation contractor and subcontractor s activities to ensure adherence to HSE requirements.</li><li>Review all HSE procedures and follow up their strict implementation on Project scope and work sites.</li><li>Take part to the Permit to Work daily and Toolbox Talks related to work activities.</li><li>Full awareness of SIMOPS dossiers for simultaneous operations between Operations and Project.</li><li>Participate in Job Risk Assessment, request new JRA s, review, propose and ensure adequate risk mitigation measures, in full consideration of site operations.</li><li>Ensure Job Risk Assessment findings are communicated, understood and implemented on site.</li><li>Assist to Site Construction Project team with effective control on site construction yards (e.g., accommodation hygiene, potable water management, handling of chemicals/COSHH, H2S, health surveillance, management of hazardous substances, lifting etc.).</li><li>Assist with supporting the required HSE competencies across the Site Construction Project team: support HSE Superintendent, APLO/SLS with organization trainings of the personnel on site.</li><li>Participate in the preparation of material to enhance awareness on any areas for improvement.</li><li>Ensure implementation of the incident / accident management system (reporting analysis, recommendations, development, of action plans and monitoring implementation.</li><li>Conduct, Coordinate, participate and monitor all HSE audits, reviews, incident and accident investigation, etc.</li><li>Assist with preparation and delivery of bridging documents to support the project teams</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Expected: Bachelor s degree in engineering or construction field. 10 to 15 years of experience in the oil industry, with significant experience in HSE Management. Previous experience under SIMOPS works will be considered as a plus. Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team Kirkuk residency is preferred Fluent in English, Arabic is a plus Personal attributes: The job holder shall be fully accountable and directly responsible for: Organizing frequent site visits and main subcontractors. Full implementation of approved Project HSE Plan and contractual HSE requirements in all activities of the Projects by company team, contractor and subcontractors. Creation of safety and security awareness and promotion of best practices with adequate emphasis on COMPANY Golden Rules. Ensuring adequate training of personnel involved in the work on HSE related matters.</p>

<p><br></p> <p><strong style="font-size: 11px;">The role</strong></p> <p>This is an exciting opportunity for an experienced Industrial Hygiene Specialist to join our Iraq Business Unit.</p> <p> <strong>Our Clients and Projects </strong> </p> <p> <strong>Designing the future. Transforming the world. </strong> </p> <p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. </p> <p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region. </p> <p> <strong> What we can offer </strong> </p> <ul> <li> <strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li> <strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li> <strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li> <strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li> <strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li> <strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li> <strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones </li> </ul> <p> <strong> Job Objectives: </strong> </p> <p>Support the Industrial Hygiene Lead in the implementation and continuous improvement of the Industrial Hygiene and Occupational Health programs. </p> <p>The position is responsible for field execution of occupational hygiene activities including anticipation, recognition, evaluation and control of chemical, physical, biological and ergonomic hazards; exposure monitoring; respiratory protection; hygiene inspections; IH equipment management; contractor compliance; technical reporting; and occupational health support. </p> <p>The role provides practical IH support to Business Lines and contractors to ensure occupational health risks are effectively identified, assessed, controlled and documented in accordance with requirements, applicable Iraqi regulations and recognized international standards.</p> <p> <strong>IH Risk Assessment, Exposure Monitoring &amp; Control</strong> </p> <ul> <li>Conduct routine, planned and task-specific IH inspections and occupational exposure assessments across production, maintenance, drilling, projects, logistics, workshops, camps and other activities</li> <li>Perform qualitative and quantitative assessment of chemical, physical, biological and ergonomic hazards and recommend controls using the hierarchy of controls. </li> <li>Support Health Risk Assessments, JSA/PTW reviews, SIMOPS and pre-job planning where occupational health hazards are involved</li> <li>Conduct and document area and personal exposure monitoring for VOC/BTEX, benzene, H2S, CO, SO2, LEL, dust/particulates, noise, heat stress, illumination, NORM/radiation and other agents as required. </li> <li>Perform TWA/STEL or task-based assessments where applicable; compare results with requirements and recognized occupational exposure limits; immediately escalate significant or abnormal findings to the IH Lead.</li> </ul> <p> <strong>IH Equipment, Sampling &amp; Data Quality</strong> </p> <ul> <li>Maintain IH instruments and sampling equipment in operational readiness. Perform/coordinate calibration, bump tests, functional checks, preventive maintenance, battery/consumable management and inventory control; maintain traceable calibration and maintenance records. </li> <li>Verify correct sampling methods, instrument configuration and data quality before field use</li> </ul> <p> <strong>Occupational Hygiene Programs</strong> </p> <ul> <li>Support implementation of occupational hygiene programs including Respiratory Protection, Hearing Conservation/noise control, Heat Stress Prevention, NORM, chemical exposure control, ergonomics, indoor/workplace environmental quality, food hygiene and drinking-water safety. Conduct kitchen, dining, welfare and camp hygiene inspections; support food/water sampling and follow-up of laboratory results and corrective actions</li> </ul> <p> </p> <p> <strong>Respiratory Protection, Operational Support &amp; Assurance</strong> </p> <ul> <li>Support the Respiratory Protection Program: conduct hazard-based respirator selection, quantitative fit testing, user instruction and recordkeeping; verify appropriate filters/cartridges and coordinate medical evaluation/clearance requirements with the MOH medical team.</li> <li>Provide IH technical support for shutdowns, confined-space preparation/entry, vessel cleaning, chemical handling, welding/hot work, waste management, drilling/project activities, occupational exposure incidents and other high-risk work. Conduct follow-up measurements to verify effectiveness of controls and safe continuation of work</li> <li>Review contractor IH plans, procedures, risk assessments, SDS information and monitoring arrangements; participate in joint inspections and compliance verification. Prepare technical survey/assessment reports, maintain exposure and calibration databases, track IH corrective actions and trends, deliver workforce awareness/training, support incident investigations involving occupational exposure, and propose improvements to IH procedures, monitoring technology and control measures to the IH Lead.</li> </ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>What makes you remarkable? </strong> </p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p> <p> <strong>Expected:</strong> </p> <ul> <li>Bachelor s degree in industrial Hygiene, Occupational Health, Environmental Engineering, Environmental Science, Chemistry or another relevant scientific/engineering discipline. </li> <li>Sound knowledge of occupational hygiene principles, exposure assessment, occupational exposure limits and hierarchy of controls.</li> <li>BOHS occupational hygiene qualification or equivalent is preferred. CIH or equivalent professional certification is an advantage. Relevant competency/training in gas detection, VOC/BTEX monitoring, noise, heat stress, respiratory fit testing, NORM/radiation monitoring, air sampling and occupational hygiene instrumentation is desirable.</li> <li>Minimum 5 years of Industrial/Occupational Hygiene experience, preferably within oil &amp; gas, petrochemical, energy or heavy industry. </li> <li>Demonstrated practical experience conducting field exposure monitoring, interpreting results and recommending occupational health controls</li> <li>Arabic and English: good working proficiency in speaking, reading and writing, with the ability to prepare clear technical reports and communicate findings to workforce, contractors and management.</li> <li>Strong practical competency in IH monitoring/sampling; VOC/BTEX and gas detection; noise and heat-stress assessment; respiratory protection and quantitative fit testing; NORM/radiation monitoring; food/water hygiene; ergonomics; equipment calibration; exposure data analysis; technical reporting; SDS review and Microsoft Office. Familiarity with ACGIH, OSHA, NIOSH, WHO and applicable Iraqi occupational health requirements.</li> <li>Must be capable of frequent field work in remote and challenging oilfield environments, including hot-weather conditions and operational/shutdown activities. </li> <li>Able to prioritize multiple requests, work effectively with multidisciplinary Business Lines and contractors, maintain professional independence in technical assessments, protect confidentiality of occupational health information, and promptly report significant occupational health risks to the Industrial Hygiene Lead.</li> </ul>

<p><h4>Preface</h4> <p>We are seeking an experienced SAP Operations Manager to lead a small SAP team at the Majnoon Oil Field and ensure reliable, controlled, and business-aligned SAP operations. The role is critical to maintaining operational continuity across procurement, inventory, maintenance, finance, compliance, reporting, and wider field execution activities.</p> <p>SAP is a core business platform for Majnoon. It enables structured procurement, material availability, maintenance execution, financial control, approvals, compliance visibility, and management reporting. The SAP Operations Manager will ensure that SAP remains stable, usable, properly governed, and aligned with practical oil and gas workflows.</p> <h4>Professional summary</h4> <p>The ideal candidate will have more than 10 years of SAP experience, strong site-facing operational discipline, and proven ability to lead a compact support team in a complex industrial environment. The individual must be able to manage incidents, prioritize business-critical issues, coordinate with corporate SAP and vendor teams, improve user adoption, and maintain strong governance over access, licensing, data quality, and process compliance.</p> <h4>Core competencies</h4> <ul> <li>SAP operations leadership across SAP ECC and/or S/4HANA environments.</li> <li>Strong practical understanding of SAP MM, SAP PM, and SAP FI/CO processes.</li> <li>Oil and gas field process understanding, including maintenance, procurement, materials, cost control, approval of workflows, and operational reporting.</li> <li>Team leadership, work prioritization, coaching, knowledge transfer, and performance management.</li> <li>Incident, problem, change, access, licence, and escalation management within an ITIL-aligned support model.</li> <li>Data integrity, master data governance, compliance with evidence, and audit readiness.</li> <li>Clear communication with operations, maintenance, procurement, finance, compliance, IT, vendors, and client stakeholders.</li> </ul> <h4>Key responsibilities</h4> <ul> <li>Manage day-to-day SAP operations for site-based oil and gas activities, ensuring system availability, stable support, and timely issue resolution.</li> <li>Lead the SAP team, allocate work, manage priorities, monitor performance, coach team members, and ensure appropriate support coverage.</li> <li>Act as the primary site interface between SAP users, IM/IT leadership, corporate SAP support, vendors, and business process owners.</li> <li>Ensure SAP issues are logged, prioritized, investigated, escalated, and closed in line with agreed service levels and operational impact.</li> <li>Support SAP user access management, role changes, approval evidence, licence oversight, and segregation of duties considerations.</li> <li>Coordinate SAP process alignment with field workflows, reducing workarounds, duplicate data entry, manual reconciliation, and recurring user errors.</li> <li>Support onboarding and training for new SAP users, approvers, planners, warehouse teams, finance users, and operational stakeholders.</li> <li>Prepare concise leadership reporting covering SAP performance, critical issues, blockers, risks, recurring problems, and improvement actions.</li> <li>Maintain and improve SAP operational procedures, support guides, escalation routes, user instructions, and knowledge transfer materials.</li> <li>Support integration of SAP with relevant site systems, reporting tools, interfaces, and third-party applications where required.</li> </ul> <h4>SAP module and process coverage</h4> <p><strong>Confirmed core module focus</strong></p> <p>The current SAP Operations Manager role profile references SAP ECC / S/4HANA operations and the core modules SAP MM, SAP PM, and SAP FI/CO. These are therefore treated as the core module requirements for enhanced specification.</p> <p><strong>SAP MM - Materials Management</strong><br> Procurement, purchase requisitions, purchase orders, goods receipt, vendor coordination, inventory visibility, warehouse support, and material master data.<br> Operational relevance: supports spares availability, field procurement, stock control, materials traceability, and avoidance of operational delays.</p> <p><strong>SAP PM - Plant Maintenance</strong><br> Maintenance notifications, work orders, equipment structures, functional locations, asset history, maintenance planning, and execution support.<br> Operational relevance: supports asset reliability, corrective maintenance, planned maintenance, equipment availability, and operational continuity.</p> <p><strong>SAP FI/CO - Finance and Controlling</strong><br> Cost centers, internal orders, financial postings, cost capture, approvals, cost reporting, and compliance with finance and control requirements.<br> Operational relevance: enables transparent cost control, expenditure governance, budget alignment, and reliable financial reporting for operations.</p> <p><strong>Related SAP and integration areas - where applicable</strong></p> <ul> <li>SAP PS or project controls integration for WBS structures, commitments, project cost visibility, and finance/procurement alignment.</li> <li>SAP HCM, time-writing, or workforce charging interfaces where locally used for labour capture, working time approval, or cost recovery.</li> <li>SAP Basis, security, authorization, licensing, transport, monitoring, and technical escalation coordination.</li> <li>SAP reporting, data extracts, interfaces, dashboards, and integration points used to improve operational visibility and reduce manual reconciliation.</li> </ul> <h4>Required experience</h4> <ul> <li>Minimum 10 years of SAP experience, including operational support, functional support, SAP service delivery, or SAP team leadership responsibility.</li> <li>Experience supporting SAP in oil and gas, energy, engineering, construction, utilities, industrial operations, or comparable large-scale operational environments.</li> <li>Proven leadership of small technical or functional teams, including workload planning, performance monitoring, coaching, and service prioritization.</li> <li>Strong experience with SAP incident management, problem management, access support, change coordination, escalation management, and service reporting.</li> <li>Ability to convert user issues and operational pain points into clear SAP support actions, escalation packs, process improvements, or training interventions.</li> <li>Experience working with Finance, Procurement, Supply Chain, Warehouse, Maintenance, Operations, Project Controls, HR/time-writing, Compliance, and IT stakeholders.</li> </ul> <h4>Technical skills</h4> <ul> <li>SAP ECC and/or SAP S/4HANA operations experience.</li> <li>Working knowledge of SAP MM, PM, and FI/CO modules and their operational dependencies.</li> <li>Awareness of SAP Basis, authorizations, roles, user access, licence administration, interfaces, monitoring, and transport coordination.</li> <li>Understanding of SAP HANA and/or Oracle database concepts, performance monitoring, reporting extracts, and basic troubleshooting.</li> <li>General IT infrastructure, endpoint, network, and service management awareness sufficient to coordinate cross-IT issue resolution.</li> <li>Strong MS Office and reporting capability, including issue trackers, service dashboards, action logs, operational reports, and leadership summaries.</li> </ul> <h4>Certifications</h4> <ul> <li>SAP Certified Application Associate in a relevant module such as MM, PM, FI/CO, S/4HANA, or SAP business process integration preferred.</li> <li>ITIL Foundation or equivalent service management certification advantageous.</li> <li>Oil and gas safety, site induction, or industrial operations safety training preferred.</li> <li>Project management or team leadership certification is advantageous where the candidate has broader service improvement responsibilities.</li> </ul> <h4>Languages</h4> <ul> <li>English: fluent business and technical communication required.</li> <li>Arabic: native or fluent capability preferred.</li> <li>Chinese: advantageous.</li> </ul> <h4>KPIs and success measures</h4> <ul> <li>Maintain SAP system availability in line with agreed operational service levels, with target uptime of 99.9 percent where technically achievable.</li> <li>Ensure critical SAP incidents are acknowledged, prioritized, escalated, and progressed within agreed SLA targets.</li> <li>Maintain controlled user access, approval evidence, licence oversight, and compliance readiness.</li> <li>Deliver monthly SAP operations reporting covering performance, risks, blockers, open actions, recurring issues, and improvement progress.</li> <li>Improve SAP team capability through documented procedures, coaching, cross-training, and knowledge transfer.</li> <li>Reduce repeat issues, avoidable workarounds, data quality defects, and manual reconciliation activities through targeted improvement actions.</li> </ul> <h4>Reporting structure</h4> <ul> <li>Reports directly to the Site IT Manager / IM & IT leadership.</li> <li>Works closely with Operations and Maintenance stakeholders to ensure SAP supports practical field execution requirements.</li> <li>Coordinates with Corporate SAP functional and technical teams for escalations, enhancements, access issues, system updates, and specialist support.</li> <li>Collaborates with Finance, Procurement, Supply Chain, Compliance, Project Controls, HR/time-writing, vendors, and external support providers as required.</li> </ul> <h4>Preferred candidate profile</h4> <p>The preferred candidate will combine SAP functional awareness, disciplined service management, and practical oilfield delivery experience. They should be comfortable working directly with users, challenging poor data or weak process discipline, supporting operational priorities, and communicating clearly with leadership. The candidate should be capable of stabilizing daily SAP operations while strengthening local capability, improving documentation, and reducing dependency on informal support arrangements.</p></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <p>KBR is looking for an HSE Supervisor to be based in Basra, Iraq – daily commute.</p> <h4>Job dimension</h4> <p>The HSE Supervisor is responsible for ensuring the field level implementation of health, safety and environmental requirements during site execution works in accordance with project specifications, local regulations, and company HSE standards.</p> <p>Supervise contractor HSE performance on site to prevent incidents, ensure compliance, and promote a strong safety culture across all project activities.</p> <p>Act as the first level of HSE control on site, coordinating closely with construction teams to ensure that all works are executed safely.</p> <h4>Activities</h4> <ul> <li>Produce and maintain HSE reporting (daily/weekly/monthly reports, KPIs, statistics, corrective action status).</li> <li>Monitor daily site activities to ensure compliance with project HSE procedures, method statements, and risk assessments.</li> <li>Conduct routine HSE inspections, audits, and safety tours across all work areas (civil, mechanical, piping, electrical, lifting, marine, etc.) and report observations of the site including but not limited to work environment, PPE, mobile equipment, tools and other types of equipment.</li> <li>Ensure proper implementation of Permit to Work (PTW) system, including verification of isolations, SIMOPS and high-risk activities.</li> <li>Supervise critical activities such as lifting operations, confined space entry, working at height, excavation, and hot work.</li> <li>Verify that all personnel are trained, certified, and competent for their assigned tasks.</li> <li>Lead toolbox talks and safety briefings; promote awareness of hazards and preventive measures.</li> <li>Investigate incidents, near-misses and unsafe conditions; support root cause analysis and follow-up of corrective actions.</li> <li>Ensure proper use of PPE and implementation of control measures defined in risk assessments.</li> <li>Track and close HSE observations, non-conformities and corrective actions.</li> <li>Coordinate with HSE Lead, construction teams and contractors to ensure alignment on safety priorities.</li> <li>Participate in HAZID, SIMOPS reviews, and constructability assessments from an HSE perspective.</li> <li>Ensure environmental compliance (waste management, spill prevention, emissions control, housekeeping).</li> <li>Support implementation of emergency response plans and site drills.</li> <li>Develop and implement systems and standards to facilitate root cause and corrective action analysis, documentation and metrics as appropriate.</li> <li>Lead safety meetings to ensure staff understand safety requirements.</li> <li>Effectively communicate observations, implications and suggestions in written and verbal forms.</li> </ul> <h4>Required qualifications / experience</h4> <h5>Professional experience</h5> <ul> <li>More than 8 years of experience in HSE supervision on large EPC/EPSCC construction projects (oil & gas, infrastructure, utilities, or large industrial plants).</li> <li>Proven experience in site-based roles with strong exposure to construction activities and high-risk operations.</li> <li>Previous experience as HSE Supervisor or equivalent role on major projects.</li> <li>Experience in Middle East projects and/or remote site operations is an advantage.</li> </ul> <h5>Technical skills</h5> <ul> <li>Strong knowledge of international HSE standards and practices (ISO 45001, ISO 14001, OSHA principles).</li> <li>Familiarity with PTW systems, risk assessments (JSA/JHA), incident investigation methodologies, and SIMOPS.</li> <li>Good understanding of construction hazards (lifting, scaffolding, excavation, confined space, electrical works, etc.).</li> <li>Knowledge of environmental management practices in construction projects.</li> </ul> <h5>Level / diploma</h5> <ul> <li>NEBOSH (IGC) or NEBOSH (Oil & Gas)</li> <li>IOSH Level 3 Certificate</li> <li>IOSH Managing Safely</li> </ul> <h5>Languages</h5> <p>Proficiency in English mandatory.</p> <h5>Soft skills</h5> <ul> <li>Strong field presence and leadership in enforcing HSE culture.</li> <li>Good communication and coordination skills with multicultural teams.</li> <li>Proactive, vigilant, and detail-oriented.</li> <li>Ability to intervene, stop unsafe work, and manage conflicts when required.</li> </ul> <p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>