وظائف فني انتاج في العراق

<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><h3>Key Responsibilities</h3><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Requirements Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent. At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year. Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent. Current ARRT CT certification/registration, or applicable country-of-record equivalent. Current BLS certification or approved equivalent. Proficiency with electronic medical records and Microsoft Office applications. Ability to read, write, and speak English effectively. Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project. Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</p><p>Preferred Prior experience supporting military, government, or international healthcare environments. Current applicable security clearance.</p>

<p>In this role, you ll work with department managers and supervisors to deliver the program s preventative medicine plan. Your responsibilities will span food service, water purification, potable water, and ice plant operations, combining inspections and records review with disease prevention and environmental health activities.</p><h3>Position Title: Preventative Medicine Specialist or Technician</h3><p>Assignment Location: Onsite in Balad, Iraq; relocation required.</p><p>Work Environment: Work is normally performed in a deployed work environment.</p><h3>Key Responsibilities</h3><ul><li>Provide food and water safety support and subject matter expertise for the dining facility, retail concession restaurants and stores, reverse osmosis water purification unit, potable water operations, and ice plant operations.</li><li>Evaluate sanitation practices and preventative hygiene measures for dining facility customers and workers.</li><li>Inspect storage areas and food packaging, and inspect or review food and water deliveries.</li><li>Review water test results and collaborate on activities to prevent foodborne and waterborne illnesses. The prime contractor is responsible for testing water samples.</li><li>Work with the prime contractor, as needed, on disease surveillance, vector control, waste management, environmental health concerns, and infectious disease outbreak identification and mitigation.</li><li>Support preventative medicine inspection schedules and review department records supporting program-referenced medical technical bulletin requirements and the prevention of foodborne and waterborne illnesses.</li><li>Complete required organizational and client-specified compliance education associated with Joint Commission Healthcare Staffing Services certification or other regulatory bodies.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two years of experience in preventative medicine, including food and water safety practices.</p><p>Education or training equivalent to Preventative Specialist, Military Occupational Specialty (MOS) 68S, or an international equivalent.</p><p>Fluency in both spoken and written English.</p><h3>Assignment and Physical Requirements</h3><ul><li>Obtain medical clearance and maintain current immunizations.</li><li>Possess a valid passport from your country of record before relocation and maintain a current passport throughout your stay in Balad.</li><li>Be able to sit and stand for prolonged periods.</li><li>Work may also require bending, stooping, and lifting up to 15 pounds.</li></ul>

<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><p>Key Responsibilities</p><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent.</li><li>At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year.</li><li>Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent.</li><li>Current ARRT CT certification/registration, or applicable country-of-record equivalent.</li><li>Current BLS certification or approved equivalent.</li><li>Proficiency with electronic medical records and Microsoft Office applications.</li><li>Ability to read, write, and speak English effectively.</li><li>Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project.</li><li>Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</li></ul><p>Preferred</p><ul><li>Prior experience supporting military, government, or international healthcare environments.</li><li>Current applicable security clearance.</li></ul>

<p>The Instrumentation &amp; Controls Technician, having completed level two competencies, disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience. Basic English language skills are required. 1-3 years of experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience. Must have appropriate license or certification where required by federal, state or local laws English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<p>The primary responsibility of the Mechanic Steam and Gas - is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures.</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments.</li><li>Dismantle and assemble machinery and equipment using a variety of hand, power, pneumatic and hydraulic tools.</li><li>Perform mechanical and electrical maintenance and repairs on power tools, hand tools and training equipment.</li><li>Move machinery and equipment using hoists, cranes, chain falls and trucks.</li><li>Align machinery and equipment using hoists, squares, rules, micrometers, plumb bobs, dial indicators and/or laser alignment equipment.</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches.</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects.</li><li>Load, transport, and unload materials, tools, equipment and supplies.</li><li>Availability to travel and be away from home for extended periods of time</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree or associate degree in Technical Field, Gas Turbine Systems Technician preferred</li><li>Must have a minimum of two (2) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines.</li><li>Must have experience performing equipment alignments using either laser or traditional methods.</li><li>Must have Driver s License</li><li>Must possess minimum required hand tools.</li></ul><p>Desired Characteristics:</p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Has solid skills acquired with trainings and required to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Good mechanical/technical skills.</li><li>Good oral communication skills and critical thinking ability.</li><li>May be required to handle time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>The avionics technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical/avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical/avionics discrepancies.</p> <ul> <li>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a high degree of expertise of aircraft electrical/avionics systems.</li> <li>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications.</li> <li>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical/avionics systems.</li> <li>Utilize test equipment to include but not limited to digital volt/amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics/electrical systems.</li> <li>Order parts and materials.</li> <li>Obtain and maintain qualification as a plane captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2.</li> <li>Operate ground support equipment.</li> <li>Identify and treat avionics/electrical corrosion.</li> <li>Perform aircraft jacking and hoisting as required.</li> <li>Perform certification and re-certification of altimeter systems.</li> <li>Perform calibration of directional guidance systems.</li> <li>Required to perform collateral duty inspections.</li> <li>Must obtain and keep current turn qualification.</li> <li>Maintain cleanliness of the work center.</li> <li>Comply with foreign object damage (FOD), egress familiarization, and hazardous waste and tool control programs.</li> <li>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</li> <li>Assist as directed to ensure safety, security and preservation of government/company owned equipment.</li> <li>Present a courteous and professional demeanor when dealing with customers.</li> <li>Furnish and maintain own hand tools.</li> <li>Operate portable firefighting equipment.</li> <li>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum qualifications:</h4> <ul> <li>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and/or experience working with similar avionics systems and components is required.</li> <li>Graduation from high school or GED required.</li> <li>Must be able to meet any government/company licensing/qualification requirements for the position.</li> <li>Must have an FAA Airframe and Powerplant (A&P) license.</li> <li>Must have three (3) years’ experience in T6 aircraft electrical/avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirements.</li> <li>Demonstrate a basic knowledge of aircraft systems and nomenclature.</li> <li>Possess working knowledge and skill in the use of basic tools and test equipment.</li> <li>Must be familiar with the operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</li> <li>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</li> <li>Must obtain and keep current turn qualification.</li> </ul></p><p></p>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p>Knowledge &amp; Skills Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<p><h4>Job description</h4> <p>The non-destruction inspection technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p> <p>Determine test method and prepare fluids and parts for nondestructive inspection.<br> Interpret nondestructive inspection test results and provide information about defects to repair center.<br> Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.<br> Establish radiation areas for radiographic operations.<br> Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.<br> Perform nondestructive inspection on structures, components, and systems.<br> Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.<br> Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.<br> Operate, maintain, and inspect nondestructive equipment.<br> Perform operator maintenance and service inspections on shop equipment and tools.<br> Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.<br> Perform silver recovery functions.<br> Handle and dispose of hazardous waste and materials.<br> Perform other qualified duties as assigned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> U.S. military technical school or specialized training course is desired, certification of education level is required.<br> Completion of an initial nondestructive inspection level II training course and current basic qualification.<br> Three (3) or more years’ experience as an aviation inspector and a minimum of one year experience on the assigned (MDS) airframe (UH60, AH64, CH47).<br> Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.<br> Must be in possession of a U.S. passport with 3 years of validity remaining at the time of hire and be able to travel internationally.<br> Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br> Able to clear CENTCOM medical requirements for deployment.<br> Ability to obtain and maintain Iraq visa.</p> <h4>Knowledge and skills</h4> <ul> <li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li> <li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li> <li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li> <li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li> <li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li> <li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li> <li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li> <li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li> <li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li> <li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li> <li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li> <li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and shears, etc. is required.</li> <li>Ability to provide technical support to structural/mechanical engineers and customers.</li> <li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li> </ul> <h4>Physical requirements and working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test qualification.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for providing hardware and software on-site and remote support, this position requires an experienced multi-discipline technologist capable of working independently and as part of a local and corporate team. Receives trouble reports for IT equipment and software via telephone, email, and service tickets. Assesses problem reports, performs corrective actions in accordance with enterprise work instructions, and delivers deskside support to internal customers, both in-person and via remote support tools. Baselines and deploys new equipment to users. Trains company personnel in technology solutions. Serves as a technical resource. Provides problem-solving support to computer users. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Primary support and interface with site Information Management to ensure all Service Desk resources are utilized in the most efficient manner. + Assists customers with daily functions of computer, network, and software management for the site and all users. + Provides immediate response to all customers who come to the Service Desk. + Provides person to person interaction involves troubleshooting, information exchange and help with ticket submission and issues. + Provides telephone customer support for incoming and follow up calls used for initial troubleshooting. + Remedy call management software and other tools, to log and manage trouble tickets. + Must have the technical ability to accurately determine call routing for trouble tickets that cannot be resolved immediately at the Service Desk. + Creates logon and email accounts for customers as needed. + Manages Network Services with Server Manager, Print Queue Management + Works within a small continuous improvement focused team. + Tracks and documents work performed to allow accurate reporting of all Service Desk activities. + Completes all tasks and assignments as requested by Supervisors and Management. + Utilizes Windows account management tools to perform account administration, password changes, group changes, and account expiration date changes. + Performs other duties and assignments as required + Other Technical IT Duties as required. Qualifications + Minimum Qualifications: + Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. Use the guide below to determine education and experience for this position. + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. + Experience: + Three years IT Service Desk Technician experience. + Certifications: + CompTIA A+, Microsoft 365 Certified: Modern Desktop Administrator Associate, CompTIA Network + + Skills: + Proficient in Microsoft Office 2010 or higher suite, data entry, copying, faxing, filing, assembling binders + Provides IT support for resolution of technical problems related to windows environments and windows applications, e-mail, database and security products. + Ability to isolate problem trends and troubleshoots recurring problems to find permanent solutions. + Ability to determine desktop and hardware related issues. + Excellent interpersonal skills. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>