وظائف مهندس صيانة في العراق

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <div dir="rtl"><span>Ensure the readiness and safety of the bank buildings and facilities by implementing and following up on preventive and corrective maintenance tasks.<br> Main responsibilities: carry out basic maintenance works for electricity, lighting, plumbing, air conditioning, and facilities.<br> Monitor and address faults in the head office and branches.<br> Implement and follow up on preventive maintenance plans.<br> Coordinate with external maintenance companies and technicians when needed.<br> Monitor the quality of work by contractors and service providers.<br> Track maintenance needs, materials, and spare parts.<br> Record maintenance work and faults and prepare the necessary reports.<br> Adhere to safety procedures and bank policies.<br> Qualifications and experience: Diploma or Bachelor’s degree in technical fields or related practical experience.<br> Experience in maintenance and facilities work.<br> Basic knowledge of electricity, plumbing, and air conditioning.<br> Good skills in problem solving, communication, and organization.<br></span></div> </div>

<p>Managing the office side of project execution on a day-to-day basis: ensuring sites have the materials, machinery, and approvals they need before they are required, and converting drawings, specifications, and bill of quantities into actionable, approved information; measuring what has been completed, documenting, certifying, and uploading it in the interim statements so the company receives its full dues on time. This role is the liaison between sites, suppliers, and the client consultant, and conveys this liaison in English.</p><p><strong>&nbsp; Tasks and responsibilities &nbsp;</strong></p><p><strong>First: Office logistics and procurement support</strong></p><p>▪&nbsp;&nbsp;&nbsp; Consolidate material requests from all sites into a single organized purchase plan, in sequence of the project schedule, rather than processing each request separately.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical RFIs and RFQs, and obtain at least three quotes for each material or service of significant value.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical and financial comparison tables, verify each quote against specifications, and raise recommendations to management for award.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare internal purchase requests, follow up on issued purchase orders, fix delivery dates, and expedite any supplier that is delayed.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a material tracking log — what was requested, in transit, delivered, and still pending — and circulate weekly.</p><p>▪&nbsp;&nbsp;&nbsp; Identify long lead-time materials at the start of each project, and notify management in writing of any material threatening its planned delivery schedule.</p><p>▪&nbsp;&nbsp;&nbsp; Coordinate transport, hire machinery, and equipment movement between sites, and secure related permits.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of machinery and equipment: location, operating hours, fuel consumption, maintenance dates, and certificate validity.</p><p>▪&nbsp;&nbsp;&nbsp; Control minimum stock levels of consumables and monitor their distribution to sites against signed requests.</p><p><strong>Second: Delegation of works from the technical office</strong></p><p>▪&nbsp;&nbsp;&nbsp; Review drawings, specifications, and BOQs before work starts, raise RFI on any conflict to be resolved at the office, not on site.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare as-built (Shop Drawings) and As-Built drawings, reinforcement schedules, and cutting lists.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare and submit material submittals with their technical data, and maintain a log of their status and dates.</p><p>▪&nbsp;&nbsp;&nbsp; Issue the latest approved edition of each drawing to site, and withdraw obsolete editions from circulation.</p><p>▪&nbsp;&nbsp;&nbsp; Compile quantities from drawings and compare with the BOQ; define additional works before execution, not after.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare method statements, ITPs, and material approval requests.</p><p>▪&nbsp;&nbsp;&nbsp; Review daily and weekly site reports, update progress against the schedule, and raise variances with reasons.</p><p><strong>Third: Measurement, interim payments, and cost control</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare interim monthly progress certificates: measurement sheets, quantities, supporting documents, and a pictorial record, submitted on the contractual date.</p><p>▪&nbsp;&nbsp;&nbsp; Verify subcontractor interim payments against actual billed works, and certify only what is proven.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare change orders and extension requests with supporting documents and cost analysis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a comparison of actual cost vs budget for each item in the BOM and escalate any overruns when they occur, not at project close.</p><p>▪&nbsp;&nbsp;&nbsp; Reconcile material consumption with theoretical quantities from drawings and report waste or loss.</p><p><strong>Fourth: Subcontractors and suppliers</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare scopes of work for subcontractors and RFQ packages, and compare bids on a comparable basis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain approved suppliers and subcontractors lists, with contact details, prices, and past performance records.</p><p>▪&nbsp;&nbsp;&nbsp; Monitor validity of subcontractor insurance and bonds, registrations, and work permits, and provide warnings before expiry.</p><p><strong>Fifth: Planning and reporting</strong></p><p>▪&nbsp;&nbsp;&nbsp; Maintain baseline schedule and update actual progress on agreed dates (MS Project or Primavera P6).</p><p>▪&nbsp;&nbsp;&nbsp; Prepare weekly and monthly progress reports, including the cumulative progress curve (S-Curve), labor and equipment curves, and pictorial log.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of action items arising from client, consultant, and internal meetings, and follow through to closure.</p><p>▪&nbsp;&nbsp;&nbsp; Contribute to preparing tender timelines, method of execution, and resource schedules accompanying bids.</p><p><strong>Sixth: Documentation and correspondences in English</strong></p><p>▪&nbsp;&nbsp;&nbsp; Draft technical correspondences, RFIs, approvals, transmittals, and progress reports in English with sound technical terminology.</p><p>▪&nbsp;&nbsp;&nbsp; Attend meetings with clients and consultants, present the technical position, and prepare meeting minutes.</p><p>▪&nbsp;&nbsp;&nbsp; Control project documentation: numbering, transmittal log, drawing register, and archiving all outgoing and incoming items in an organized manner.</p><p>▪&nbsp;&nbsp;&nbsp; Note: Company clients are international entities and organizations, and their contracts, specifications, and correspondences are in English only; thus English writing proficiency is a mandatory requirement for this role, not an added bonus.</p><p><strong>&nbsp; Qualifications and experience &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Bachelor’s degree in Civil Engineering (preferred), or Electrical or Mechanical Engineering, from a recognized university.</p><p>▪&nbsp;&nbsp;&nbsp; Valid membership in the Engineers Syndicate or equivalent in the work country.</p><p>▪&nbsp;&nbsp;&nbsp; Four (4) years of experience or more with a contracting company in the technical office or in project execution; design office experience alone is not a substitute.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in English speaking and writing — mandatory. Arabic is the daily language for site coordination.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in AutoCAD, advanced Excel, Word, and MS Project or Primavera P6; familiarity with Revit and BIM systems is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to quantify accurately and read civil, structural, and MEP drawings and specifications.</p><p>▪&nbsp;&nbsp;&nbsp; Practical knowledge of FIDIC contracts and the structure of BOQs and certifying interim payments is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Valid driving license and willingness to travel to sites.</p><p><strong>&nbsp; Personal skills and competencies &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Numerical accuracy — this role deals with quantities that translate into money, and any miscalculation will cost later.</p><p>▪&nbsp;&nbsp;&nbsp; Organizational ability to manage multiple projects concurrently without neglecting any.</p><p>▪&nbsp;&nbsp;&nbsp; Proactive rather than reactive: procurement and submission ahead of need, not after work stops due to shortage.</p><p>▪&nbsp;&nbsp;&nbsp; Clear and proper English writing, enabling communication with the consultant without rephrasing the letter.</p><p>▪&nbsp;&nbsp;&nbsp; Discretion in dealing with prices, costs, profit margins, and supplier terms.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to stand firm on a technical position under client or consultant pressure, and escalate to management instead of yielding.</p><p><strong>&nbsp;</strong></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Job Description </b><div> <p> <strong>Role Summary</strong> </p> <p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p> <p> <strong>What s On Your Plate?</strong> </p> <p> <strong>Expansion &amp; Layout Development:</strong> </p> <ul> <li> <p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p> </li> <li> <p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p> </li> </ul> <p> </p> <p> <strong>Procurement &amp; Technical Documentation:</strong> </p> <ul> <li> <p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p> </li> <li> <p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p> </li> </ul> <p> </p> <p> <strong>Facilities Maintenance &amp; Contractor Supervision:</strong> </p> <ul> <li> <p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p> </li> <li> <p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p> </li> <li> <p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p> </li> <li> <p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p></li></ul></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Qualifications </p><div> <ul> <li> <p> <strong>Education &amp; Experience: </strong>Diploma or Bachelor s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1 2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p> </li> <li> <p> <strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs.</p> </li> <li> <p> <strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p> </li> <li> <p> <strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p></li></ul></div><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops,&nbsp; and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br>Job Description<br><p><strong>Role Summary</strong></p><br><p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p><br><p><strong>What’s On Your Plate?</strong></p><br><p><strong>Expansion &amp; Layout Development:</strong></p><br><ul><li><p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p><br></li><li><p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p><br></li></ul><p><strong>Procurement &amp; Technical Documentation:</strong></p><br><ul><li><p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p><br></li><li><p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p><br></li></ul><p><strong>Facilities Maintenance &amp; Contractor Supervision:</strong></p><br><ul><li><p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p><br></li><li><p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p><br></li><li><p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p><br></li><li><p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p><br></li></ul><br>Qualifications<br><ul><li><p><strong>Education &amp; Experience: </strong>Diploma or Bachelor’s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1–2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p><br></li><li><p><strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization.&nbsp; strong foundational knowledge in drafting construction BOQs and SOWs.</p><br></li><li><p><strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p><br></li><li><p><strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p><br></li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>Role Summary</strong></p><br><br><p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p><br><br><p><strong>What’s On Your Plate?</strong></p><br><br><p><strong>Expansion &amp; Layout Development:</strong></p><br><br><ul><li><p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p><br><br></li><li><p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p><br><br></li></ul><br><p><strong>Procurement &amp; Technical Documentation:</strong></p><br><br><ul><li><p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p><br><br></li><li><p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p><br><br></li></ul><br><p><strong>Facilities Maintenance &amp; Contractor Supervision:</strong></p><br><br><ul><li><p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p><br><br></li><li><p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p><br><br></li><li><p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p><br><br></li><li><p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p><br><br></li></ul><br>What you need to be successful<br><ul><li><p><strong>Education &amp; Experience: </strong>Diploma or Bachelor’s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1–2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p><br><br></li><li><p><strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs.</p><br><br></li><li><p><strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p><br><br></li><li><p><strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p><br><br></li></ul><br>Who we are<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops, and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Process Engineer (Local Talent)<br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><br><p><b>Position title: </b>Process Engineer</p><br><br><p><b>Position status: </b>Local Talent</p><br><br><p><b>Position reports to: </b>Lead- Operation Support &amp; Process</p><br><br><p><b>Department: </b>O&amp;M Support</p><br><br><p><b>Rotation pattern: </b>28/28</p><br><br><br><p><b>Job purpose</b></p><br><br><br><p>Responsible for the process design, operation and implementation, improve industrial processes in order to maintain efficiency, reduce cost, improve sustainability and maximize profitability.</p><br><br><br><p><b>Duties and responsibilities</b></p><br><br><ul><li>Develop, configure and optimize industrial processes from inception through to start up and certification</li><li>Assess processes, take measurements and interpret data</li><li>Design, run, test and upgrade systems and processes</li><li>Develop best practices, routines and innovative solutions to improve production rates and quality of output</li><li>Perform process simulations</li><li>Manage cost and time constraints</li><li>Provide technical assurance to unit operations and ensure production plan delivery</li><li>Provide process documentation and operating instructions</li><li>Participate timely completion of Management of Change work (MOCs, medium to long term).</li><li>Utilise and perform maintenance of standardized monitoring tools to perform unit monitoring (Spreadsheets, or data historians like PI Process Book, etc).</li><li>Participate in special projects as required</li><li>Support Senior Operation Support Engineer as required</li><li>Consult technical specialist teams as required</li><li>Facilitate/ Pparticipate in HAZOP studies, and other safeguarding reviews</li><li>Utilize structured problem-solving techniques as appropriate: option analysis, RCA, etc</li><li>Ensure compliance with engineering related regulations and Shell standards</li><li>Promote and support compliance to Operating Integrity</li><li>Provide input into and support for the Integrated Activity Plan</li><li>Support Operations Reliability Improvement Process to ensure timely and appropriate corrective action has been taken to ensure repeat failures are eliminated</li></ul><br><br><p><b>Qualification &amp; Training requirements</b></p><br><br><ul><li>BSc. Degree in one of chemical or petrochemical engineering department.</li></ul><p><b>Experience </b></p><br><br><ul><li>A minimum of 5 years of proven working experience in Process Engineering.</li><li>Experience in process simulations, with working knowledge of process engineering software packages and Knowledge of process related standards.</li><li>Experience in different process industry, either upstream, downstream, gas plants or with engineering and construction major contractors.</li></ul><p><b>Language proficiency, computer and software skills</b></p><br><br><ul><li>Advanced knowledge of MS Office <b>Advance</b></li><li>Honey well Unisim <b>Intermediate</b> </li><li>PipeSim <b>Intermediate</b></li><li>Instrument Calc. tool <b>Intermediate</b></li><li>PI Process Book <b>Intermediate</b></li><li>English - Speaking, Writing and reading <b>Intermediate</b></li></ul><br><p><b>Skills</b></p><br><br><ul><li>Reading and updating process documents</li><li>Presentation skills</li><li>Problem Solving</li><li>Report Writing</li><li>Communication skills</li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Duty Engineer you are responsible for all the mechanical and technical maintenance and HVAC equipment within your property and your role will include key responsibilities such as:<br><br>• Supervise and control the preventive maintenance schedule<br>• Be responsible for the health safety of the property<br>• Follow the preventive maintenance chart strictly and maintain records for future reference<br>• Coordinate with other department’s counterparts to ensure their satisfaction on quality and progress<br>• Create departmental training programmes among engineering employees and create opportunities to multitask<br>• Distribute the work to subordinates accordingly to their capabilities in order to get the best results to the specified standards</p> </div>

<p>Responsible of RNCs, BSCs, transport (IP &amp; microwave), CME/power maintenance in addition to Operation &amp; maintenance for all sites in area which including all bands 2G,3G &amp; LTE . Site configuration of parameters to follow RF requests, modify TR equipment s, and work on NET echo Field troubleshooting &amp; fix problem for TR microwave, RAN and CME/power. Support to the other department upon requests. Daily Check all BTS &amp; MW, CME clearance alarm, close TKT &amp; resolving and following up all pending issues. Acceptance and on-air new sites or expansions. Daily task O&amp;M follow up. follow up CME maintenance subcontractor. Team work &amp; CR implementations. Network performances &amp; KPI with outage follow up. Daily report to Cluster Supervisor.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>B.sc degree (Telecommunication Engineering or Electrical Engineering or equivalent degree).</li><li>Graduate or 1-year experience.</li><li>Having a Valid Engineers Union ID Card .</li></ul><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change .</p><p>Technical Competencies: Access Network Operations Network Monitoring Problem Solving Service Operations Center (SOC) Technical Writing and Reporting Troubleshooting &amp; Technical Problem Solving.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Mechanical Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 5 Reports To: Maintenance Supervisor / Senior Maintenance Technician Preferred Nationality: Indian/Iranian Job Purpose Perform hands-on preventive and corrective mechanical maintenance on high-speed thermoforming/Form-Fill-Seal water cup production machines.<br> The technician will inspect, service, repair, adjust, and troubleshoot equipment throughout the complete cup-forming, filling, sealing, cutting, and discharge process.<br> Key Responsibilities Perform scheduled preventive maintenance according to approved checklists.<br> Respond quickly to production-line breakdowns and restore equipment safely.<br> Inspect, dismantle, repair, replace, and reassemble mechanical components.<br> Clean, lubricate, adjust, and align machine parts and assemblies.<br> Check film feeding, heating, forming, filling, sealing, cutting, and discharge stations.<br> Replace bearings, chains, sprockets, timing belts, seals, guides, and other wear parts.<br> Service shafts, gearboxes, conveyors, pumps, pneumatic cylinders, and valves.<br> Assist with mold changes, machine setup, alignment, and trial production.<br> Identify abnormal noise, vibration, temperature, wear, leakage, and misalignment.<br> Report developing defects and required spare parts to senior maintenance personnel.<br> Record completed work, replaced components, and observed machine conditions.<br> Support major maintenance, overhauls, installations, and shutdown activities.<br> Work with production operators to identify and correct machine-related quality problems.<br> Maintain tools and keep maintenance areas clean and organized.<br> Follow all safety, food-hygiene, and lockout/tagout procedures.<br> Required Technical Experience Candidates should have strong practical knowledge of: Thermoforming stations and molds Plastic-film feeding, tracking, and tension systems Heating systems and heating zones Vacuum systems Pneumatic cylinders, valves, and air-control components Filling mechanisms, pumps, and filling nozzles Lid-film feeding and alignment systems Heat-sealing stations Cutting and punching systems Cup-discharge mechanisms Bearings, chains, sprockets, and timing belts Shafts, couplings, and gearboxes Linear guides and mechanical slides Conveyors and pumps Lubrication and preventive maintenance Candidates must be able to assist in diagnosing and correcting: Poor or incomplete cup forming Film misalignment, slipping, or incorrect tension Water leakage or incorrect filling volume Weak, uneven, or incomplete sealing Cutting and punching problems Machine timing and synchronization faults Abnormal vibration, noise, wear, or overheating Repeated machine stoppages Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical certificate or diploma in Mechanical Maintenance, Industrial Maintenance, Mechanical Engineering, or a related field.<br> Minimum 3–5 years of practical experience on thermoforming/FFS cup production machines.<br> Strong mechanical fitting and troubleshooting skills.<br> Ability to use standard maintenance tools and precision measuring instruments.<br> Basic ability to read drawings, equipment manuals, and parts diagrams.<br> Ability to work safely under pressure during production breakdowns.<br> Willingness to work shifts, overtime, and emergency maintenance when required.<br> Ability to follow instructions and work effectively within a maintenance team.<br> Critical Selection Requirement This is a specialized production-line maintenance position.<br> Applicants whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, or general factory maintenance will not qualify unless they also possess direct thermoforming/FFS water cup production-machine experience.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Senior Maintenance Technician – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 2 Reports To: Maintenance Supervisor Supervisory Responsibility: Shift maintenance team when assigned Preferred Nationality: Indian/Iranian Job Purpose Provide senior-level, hands-on maintenance support for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Senior Maintenance Technician will lead shift maintenance work, diagnose complex faults, perform precision adjustments, and support preventive and major maintenance activities.<br> Key Responsibilities Implement daily, weekly, monthly, and shutdown maintenance plans.<br> Lead technicians during scheduled maintenance and production-line breakdowns.<br> Diagnose complex mechanical faults and production-related machine problems.<br> Perform machine setup, changeovers, adjustment, alignment, and synchronization.<br> Inspect machine condition and identify developing faults before failure occurs.<br> Carry out preventive, corrective, and major maintenance activities.<br> Escalate recurring faults and support root-cause analysis.<br> Record completed work, findings, parts used, and follow-up actions.<br> Identify future maintenance requirements and critical spare-parts needs.<br> Monitor recurring component failures and recommend technical improvements.<br> Assist with installation, commissioning, and overhaul work when required.<br> Train mechanical technicians and selected production operators.<br> Coordinate with production personnel during adjustment and test runs.<br> Assume responsibility for the maintenance team when the supervisor is unavailable.<br> Follow food-safety, personal-safety, lockout/tagout, and housekeeping requirements.<br> Required Technical Experience Candidates must have practical experience across the complete thermoforming/FFS water cup process: Film feeding, tracking, tensioning, and alignment Heating-zone inspection and adjustment Thermoforming stations, molds, vacuum, and cooling Filling systems, pumps, valves, nozzles, and volume adjustment Lid-film feeding, tracking, and tension control Heat-sealing temperature, pressure, timing, and alignment Cutting, punching, and cup-discharge mechanisms Pneumatic cylinders, solenoid valves, regulators, and air systems Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and mechanical alignment Candidates must be able to troubleshoot: Poor or incomplete cup forming Film tracking and alignment problems Water leakage and inaccurate filling volume Weak, incomplete, or uneven sealing Cutting and punching defects Mechanical timing and synchronization problems Abnormal vibration, noise, and overheating Repeated stoppages and intermittent machine faults Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Technical diploma or equivalent qualification in Mechanical Maintenance, Mechanical Engineering, Mechatronics, or a related field.<br> Minimum 5–7 years of direct experience on thermoforming/FFS cup production machines.<br> Ability to lead maintenance work during shifts and breakdowns.<br> Strong practical knowledge of precision fitting, alignment, and adjustment.<br> Ability to interpret machine manuals, drawings, and spare-parts diagrams.<br> Basic ability to prepare maintenance records and technical reports.<br> Ability to train and guide junior technicians.<br> Willingness to work shifts and respond to urgent breakdowns.<br> Critical Selection Requirement Applicants must have direct experience maintaining machines that form, fill, and seal plastic water cups.<br> Experience limited to bottled-water lines, RO systems, vehicles, buildings, utilities, or general factory maintenance does not meet the position’s core requirement.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design, install, commission, and maintain chilled &amp; frozen refrigeration systems ✅ Diagnose and resolve refrigeration system faults and technical issues ✅ Perform preventive and corrective maintenance to ensure optimal performance ✅ Monitor system efficiency and recommend energy-saving improvements ✅ Ensure compliance with safety regulations and industry standards ✅ Coordinate with clients, contractors, and project teams ✅ Prepare maintenance reports and technical documentation</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>✔ Bachelor's Degree/Diploma in Mechanical Engineering, Refrigeration Engineering, or a related field ✔ Proven experience with commercial or industrial chilled &amp; frozen refrigeration systems ✔ Strong knowledge of compressors, condensers, evaporators, cold rooms, and refrigeration controls ✔ Experience with ammonia (NH₃) and/or Freon-based systems is an advantage ✔ Ability to read technical drawings and troubleshoot complex refrigeration systems</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible of RNCs, BSCs, transport (IP &amp; Microwave), CME/power maintenance in addition to Operation &amp; maintenance for all sites in area which including all bands 2G,3G &amp; LTE.</p><p>1-Site configuration of parameters to follow RF requests, modify TR equipment s, and work on NET echo</p><p>2-Field troubleshooting &amp; fix problem for both TR Microwave, RAN and CME/Power.</p><p>3-Support to the other department upon requests.</p><p>4-Daily Check all BTS &amp; MW, CME clearance alarm, close TKT &amp; resolving and following up all pending issues.</p><p>5-Acceptance and on-air new sites or expansions.</p><p>6-Daily task O&amp;M follow up.</p><p>7- follow up CME maintenance subcontractor</p><p>8-Team work &amp; CR implementations.</p><p>9-Network performances &amp; KPI with outage follow up.</p><p>10-Daily report to Cluster Supervisor.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>B.sc degree (Telecommunication Engineering or Electrical Engineering or equivalent degree).</b><br><b>3-5 years experience</b><br><b>Having a valid Engineer's union ID Card</b><br><br><b>Behavioral Competencies:</b><br></p><ul><li>Delivering Results &amp; Fostering Ownership</li><li>Building Customer Value</li><li>Networking &amp; Influencing Collaboratively</li><li>Leading Teams</li><li>Driving Change</li></ul><br><b>Technical Competencies:</b><br><ul><li>Access Network Operations</li><li>Network Monitoring</li><li>Problem Solving</li><li>Service Operations Center (SOC)</li><li>Technical Writing and Reporting</li><li>Troubleshooting &amp; Technical Problem Solving</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p> Support the operation , maintenance and reliability of Data Center telecom infrastructure and equipment to ensure continuous service availability and operational efficiency </p> <p> </p> <ul> <li> Perform daily operation and maintenance activities for Data Center telecom infrastructure and equipment.</li> <li> Monitor alarms, equipment status, and system performance, and report abnormalities.</li> <li> Perform preventive and corrective maintenance activities to ensure service continuity and minimize downtime.</li> <li> Install, maintain, and troubleshoot telecom equipment, fiber optic systems, connectivity infrastructure, and tower-mounted equipment within the Data Center site.</li> <li> Support the implementation of approved maintenance activities and Change Requests (CRs).</li> </ul> <ul> <li> Diploma Degree</li> <li> Computer /Software offices</li> <li> English &amp; Arabic languages</li> <li> Communication and Collaboration</li> <li> 0 - 2-year experiences</li> </ul> <p> </p> <p> <strong>Behavioral Competencies:</strong> </p> <p> <br> </p> <ul> <li> Delivering Results &amp; Fostering Ownership</li> <li> Building Customer Value</li> </ul> <p> </p> <p> <strong>Technical Competencies:</strong> </p> <p> <br> </p> <ul> <li> Data Canter Infrastructure Operations</li> <li> Fiber Optic and Telecom Equipment Maintenance</li> <li> Power , Cooling and Environmental Monitoring</li> <li> Safety , Security and Operational Compliance</li> <li> Troubleshooting &amp; Technical Problem Solving</li> </ul> <p> </p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Job Description: Maintenance Supervisor – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 1 Reports To: Factory Manager / Operations Manager Direct Reports: Senior Maintenance Technicians and Mechanical Maintenance Technicians Preferred Nationality: Indian/Iranian Job Purpose Lead the maintenance function for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Maintenance Supervisor will develop maintenance plans, manage the technical team, respond hands-on to major breakdowns, improve machine reliability, and ensure critical spare parts are available.<br> Key Responsibilities Prepare daily, weekly, monthly, quarterly, preventive, and shutdown maintenance plans.<br> Assign maintenance activities and supervise their safe, timely completion.<br> Lead troubleshooting during major breakdowns and recurring machine failures.<br> Conduct root-cause analysis and implement permanent corrective actions.<br> Reduce unplanned downtime and improve equipment reliability and availability.<br> Coordinate maintenance schedules and machine interventions with production.<br> Prepare maintenance checklists, SOPs, equipment histories, and technical reports.<br> Monitor equipment condition and recommend repairs, overhauls, or replacements.<br> Develop critical spare-parts lists for the complete production line.<br> Forecast spare-parts requirements and establish minimum and maximum stock levels.<br> Monitor spare-parts consumption, failure frequency, and component service life.<br> Prepare accurate technical specifications for purchasing spare parts and services.<br> Evaluate the technical suitability of proposed replacement components.<br> Train senior technicians, mechanical technicians, and selected production employees.<br> Ensure compliance with safety, food-hygiene, and lockout/tagout requirements.<br> Maintain proper housekeeping and tool control during maintenance activities.<br> Required Technical Experience Candidates must have direct, hands-on experience maintaining thermoforming/FFS machines that form, fill, and seal water cups, including: Plastic-film feeding, tracking, and tension control Heating and thermoforming stations Forming molds, vacuum systems, and cooling arrangements Water-filling mechanisms, nozzles, pumps, and volume adjustment Lid-film feeding and alignment systems Heat-sealing temperature, pressure, and timing control Cutting, punching, and cup-discharge systems Pneumatic cylinders, valves, regulators, and air preparation Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and machine alignment Mechanical synchronization of high-speed production equipment Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Diploma or bachelor’s degree in Mechanical Engineering, Mechatronics, Industrial Maintenance, or a related discipline.<br> Minimum 7–10 years of relevant maintenance experience.<br> Demonstrated supervisory experience in a production environment.<br> Strong mechanical troubleshooting and root-cause-analysis ability.<br> Ability to prepare preventive maintenance plans, SOPs, checklists, and reports.<br> Working knowledge of maintenance KPIs, downtime analysis, and spare-parts control.<br> Ability to read mechanical drawings, manuals, parts diagrams, and specifications.<br> Willingness to work hands-on and respond to breakdowns outside normal hours when required.<br> Critical Selection Requirement General maintenance experience alone is not sufficient.<br> Candidates whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, utilities, or unrelated factory equipment will not qualify unless they also have substantial direct experience with thermoform/FFS water cup production machines.<br></span> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role Summary We are seeking a versatile and highly organized Operations &amp; Performance Admin Engineer to join the talabat mart (tMart) team. This hybrid role bridges technical facilities management with data-driven operational performance administration. On the engineering side, you will oversee the maintenance, procurement support, and supplier supervision for dark store facilities, ensuring critical infrastructure like cold chain systems (chillers/freezers) and electrical networks remain fully operational. On the administration side, you will dedicate focus to monitoring, tracking, and reporting the operational health of the dark stores, reviewing ground-level efficiency metrics, and delivering structured compliance dashboards to ensure seamless 30-minute delivery execution. What s On Your Plate? Engineering &amp; Facilities Management: Infrastructure Maintenance: Proactively identify, diagnose, and manage the maintenance and repair needs of essential store infrastructure, including industrial chillers, freezers, HVAC/AC systems, electrical distribution networks, and general facilities. Procurement Documentation: Formulate highly accurate and detailed Scope of Work (SOW) documents and Bill of Quantities (BOQ) for new equipment purchases, facility upgrades, and engineering services. Supplier Supervision: Supervise on-site third-party contractors and service providers during engineering installations, routine maintenance, and emergency repairs, enforcing strict quality and safety standards. Handover &amp; Receiving: Conduct technical inspections and serve as the final authority for the formal receiving and handover of newly executed engineering projects, facilities, or physical assets. Performance Administration: Real-Time Order Flow Monitoring: Maintain a regular order-flow monitoring schedule on the Shopper platform, and actively inform the relevant store team via communication groups in case of any delays in assigning or preparing orders. Nightly Sales Tracking: Create and publish structured sales update tables every night at 7:00 PM, 9:00 PM, 11:00 PM, and 12:15 AM to keep the team informed on performance milestones. Picker Performance Analytics: Check picker performance at the granular order level, calculate efficiency averages, and prepare comprehensive reports to help team leaders optimize speed and accuracy. Customer Feedback Administration: Follow up with the account advisor to aggregate, categorize, and report back on direct customer feedback to identify service delivery bottlenecks. Operational Sheet Management: Maintain and systematically update the central operations Google Sheet for all immediate store-level updates, operational tracking parameters, and system notifications. In-App Quality Control Audits: Perform weekly systematic audits of images on the talabat App, flagging discrepancies, and proactively uploading missing visual assets to guarantee catalog completeness. Barcode Error Tracking: Identify and log non-working barcodes using the specialized operations tracking sheet to minimize order picking delays. Store Invoice &amp; Compliance Audits: Monitor, track, and verify the physical and digital invoices uploaded directly by the store branches to ensure operational data integrity.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Education &amp; Experience:</b></p><p>Bachelor's degree in Mechanical, Electrical, or Industrial Engineering, or a highly related technical field, combined with at least 3+ years of experience across data tracking, performance reporting, facilities engineering, or administrative operations.</p><b>Technical Facility Skills:</b><p>Strong hands-on or supervisory experience identifying maintenance needs for commercial refrigeration (chillers/freezers), HVAC networks, and electrical systems. Proven ability to draft professional SOW and BOQ documents.</p><b>Analytical &amp; Tooling Proficiency:</b><p>Highly data-oriented and structured, with an advanced proficiency in Google Sheets/Excel. Comfortable managing high-volume operational dashboards and catching subtle metric anomalies.</p><b>Execution &amp; Communication:</b><p>Strong communication and reporting skills to seamlessly present daily facilities statuses and weekly performance summaries directly to Operations Management.</p><p></p></section>

<p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators.</p><p>MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel.</p><p>Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p><p>WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT.</p><p>Other duties as assigned.</p><p><strong>Desired Candidate Profile</strong></p><p>The Generator and HVAC Mechanic must have:</p><p>Education: High School diploma</p><p>Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience</p><p>Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.</p><p>Security Clearance: Secret</p><p>Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq</p><p>Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA)</p><p>Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation Certifications Section 608 Technician Certification EPA is a plus</p><p>Must meet CRC fitness standards for deployment to SWA (southwest Asia) and maintain those standards annually while on contract in SWA.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have:</p><p>Education: High School diploma</p><p>Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience</p><p>Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.</p><p>Security Clearance: Able to obtain and maintain a Secret Clearance.</p><p>Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq</p><p>Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.</p><p>Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation</p><p>Certifications Section 608 Technician Certification EPA is a plus</p><p></p></section>

<p>Reports to the Nominated Project Maintenance Supervisor. As directed, leads or carries out maintenance of field instrumentation such as field measuring &amp; indicating devices transmitters, control valves, emergency shutdown valves, motor operated valves, flame sensors and vibration probes loading arm instruments, gas &amp; steam turbine, compressor and burner management instrumentations system to retain them in functional and good operating order for reliable performance with minimum or no supervision. Ensures compliance with PPM requirements and prepares records of validation/calibration data and details of maintenance activities carried out. Guide instrument technicians for effective execution of jobs in time and achieving appropriate standard of work. Communicates with supervisor, maintenance technicians, and operations and provides feedback on job progress. Evaluates and reports on maintenance needs and priorities in his area of responsibility. Reviews work notifications, manages work orders and provides details of maintenance activities. Leads diagnosis and repair of faults &amp; breakdowns and reports operational and functional problems to supervisor and carries out remedial action under supervisor s direction. Participates in acceptance tests of new and upgrade systems, identifies deficiencies and provides punch list. Compiles and submits reports on incidents and failure investigations as and when required. Conduct toolbox meeting with other technicians and insist on strict adherence to Project safety rules. Ensures safety of personnel and equipment through compliance with company s Environmental Health and Safety policies, procedures and standards. Job Specific Requirements: Well versed in techniques and devices used for measurement of different process variables such as flow, temperature, pressure, density and level. Good knowledge and troubleshooting of pneumatic, hydraulic, electronic and digital instrumentation systems. Good knowledge in vibration measurement, burner management, gas turbine control &amp; compressor anti-surge control instrumentation. Should be able to understand Piping &amp; Instrumentation Diagrams, Process Flow Diagrams, Loop Drawings and Cause &amp; Effect, Function Block &amp; Ladder Logic Diagrams. Installation, calibration, testing and commissioning of instrumentation in a diversified oil &amp; gas processing, LNG or petrochemical plant. Good knowledge of gas turbine Speedtronic Mark V&amp; VI control, Bentley Nevada Vibration, compressor anti-surge control (CCC). Triconex &amp; standalone PLC, Distributed Control and Emergency Shutdown Systems would be advantageous. Familiar with a permit to work system and LOTO and temporary defeat system procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Higher Secondary School Education plus a three to five year technical diploma or certificate in Instrumentation or Electronics from a recognized institution.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>About Rahal Rahal is the travel mini-app inside Iraq’s Super Qi ecosystem, a Rocketship redefining how millions of travelers search, book, and manage journeys across flights, hotels, and digital services.<br> We make travel simple, safe, and accessible to everyone, everywhere.<br> Behind every great traveler experience lies a powerful hotel inventory and this is where you come in.<br> We’re building a new generation of travel; transparent, tech-first, and truly customer-obsessed.<br> About the Role Rahal is looking for a Senior Backend Software Engineer who will play a key role in designing and implementing advanced solutions to improve our Travel platform, enhancing customer satisfaction and ensuring smooth operational processes.<br> Key Responsibilities Design and implement reusable, clean, tested, efficient, secure, maintainable, and well-documented solutions.<br> Assist partners in their integration process with our published APIs.<br> Document findings, actions, and plans thoroughly, by setting up the foundations for a solid reporting framework and a communication standard.<br> Provide the technical feasibility of implementing product requirements and offer valuable input to the product team.<br> Translate product requirements into SRS and technical plan.<br> Proactively identify technical debt and propose mitigation strategies.<br> Maintaining and developing your knowledge about software development, and supporting/mentoring other team-members, sharing guidance to help them achieve career growth.<br> Conduct code reviews for peers to enhance code quality and ensure adherence to high standards.<br> Understanding the business side of the project and having the ability to lead in-depth technical and product discussions.<br> Bring new tools and invitations that can boost the startup productivity.<br> Requirements 5+ Years of experience in Software Engineering or adjacent fields.<br> 3+ Years of experience working fully remotely with a track record of self-management and accountability.<br> Hands-on experience with JavaScript/typescript and/or NodeJS/NestJs.<br> In-depth understanding of web application architecture and design principles behind the scalable applications.<br> Solid understanding of the Software Development Life Cycle (SDLC) and Agile methodologies.<br> Experience in designing and optimizing databases, with skills in query optimization, scaling, data modeling.<br> Advanced knowledge of Docker and AWS.<br></span> </div>