وظائف مهندس تصميم ميكانيكي في العراق

<p>To install, assemble, align, and complete Gas Turbines, Steam Turbines, generators, and auxiliary mechanical equipment safely and accurately. To ensure all installation and alignment work meets OEM specifications, project quality standards, and HSE requirements. To support mechanical completion, inspection, commissioning, and punch-list clearance activities.</p><p>Install and assemble Gas Turbines, Steam Turbines, generators, and auxiliary equipment. Perform precision alignment of rotating equipment using laser alignment and conventional methods. Install bearings, couplings, seals, diaphragms, casings, valves, and piping connections. Carry out dimensional checks, equipment elevation, centerline, and tolerance verification as per OEM requirements. Assist with turbine casing assembly, rotor installation, rotor coupling, and turning gear installation. Perform flange assembly and controlled bolting/hydraulic torqueing. Conduct inspection, flushing, preservation, and mechanical completion activities. Support commissioning and mechanical run-test activities when required. Participate in punch-list clearance and quality inspections. Maintain installation records, inspection reports, and quality documentation. Follow all HSE requirements, work permits, safety procedures, and site instructions. Coordinate effectively with mechanical, electrical, commissioning, QA/QC, and other site teams.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 5 years of experience in rotating equipment installation.</li><li>Experience in power plant construction projects.</li><li>Knowledge of Gas Turbine, Steam Turbine, Generator, and auxiliary equipment installation.</li><li>Ability to read and interpret mechanical and assembly drawings.</li><li>Knowledge of turbine alignment, rotor installation, and flange assembly.</li><li>Familiarity with Dial Indicators, Micrometers, Feeler Gauges, Precision Levels, and Laser Alignment Systems.</li><li>Knowledge of hydraulic torqueing and mechanical assembly practices.</li><li>Ability to understand and follow OEM installation drawings and manuals.</li><li>Good English communication and reading ability.</li></ul>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary:</p><p>The BIM/Design Coordinator is responsible for coordinating all project design disciplines including</p><p>Architectural, Structural, and MEP to ensure fully coordinated, clash-free, accurate, and constructible drawings</p><p>are issued for construction.</p><p>The role acts as the central technical coordination point between consultants, contractors, suppliers, and</p><p>internal project teams to minimize design conflicts, delays, RFIs, and rework during construction.</p><p>The BIM/Design Coordinator manages design workflows, drawing control, interdisciplinary coordination, BIM</p><p>processes, and technical communication throughout the project lifecycle.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Primary Duties and Responsibilities:</p><p><br></p><p>Design Coordination</p><p> Coordinate Architectural, Structural, and MEP drawings and models.</p><p> Review all consultant drawings for completeness, consistency, constructability, and</p><p>clashes.</p><p> Ensure all disciplines are aligned before issuance for construction.</p><p> Identify design conflicts and coordinate resolutions with consultants.</p><p> Conduct technical coordination meetings with all design stakeholders.</p><p><br></p><p>BIM Coordination</p><p> Manage BIM coordination process using Revit, Navisworks, and BIM 360/ACC.</p><p> Perform clash detection and issue clash reports.</p><p> Coordinate federated BIM models from all disciplines.</p><p> Ensure BIM models comply with project standards and LOD requirements.</p><p><br></p><p>Drawing Management &amp; Document Control</p><p> Maintain master drawing register.</p><p> Ensure proper revision control and drawing status tracking. Verify that only latest approved drawings are issued to site teams.</p><p> Track IFC, shop drawings, and as-built drawings.</p><p><br></p><p>Technical Review &amp; Constructability</p><p> Review consultant drawings for constructability.</p><p> Identify impractical or conflicting design details before execution.</p><p> Support resolution of RFIs and technical queries.</p><p><br></p><p>Site Coordination Support</p><p> Assist construction teams in interpreting design documents.</p><p> Participate in site inspections and technical meetings.</p><p> Support resolution of unforeseen site clashes.</p><p><br></p><p>Design Change Management</p><p> Track and document all design changes.</p><p> Assess impact of design revisions on cost, schedule, and construction.</p><p> Maintain change logs and coordination records.</p><p><br></p><p>Reporting &amp; Documentation</p><p> Prepare weekly coordination reports.</p><p> Maintain clash logs and RFI logs.</p><p> Coordinate communication between consultants and stakeholders.</p><p><br></p><p>Qualifications</p><p> Bachelor’s Degree in Civil Engineering, Architectural Engineering, or MEP Engineering.</p><p> 4+ years in construction design coordination or BIM coordination.</p><p> Experience in residential/building construction projects.</p><p> Experience coordinating Architectural, Structural, and MEP systems.</p><p> Experience with consultant and contractor coordination.</p><p><br></p></div>

<p>The successful candidate will be responsible for supporting electrical operations, maintenance, troubleshooting, and field activities while ensuring compliance with safety standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Electrical Engineering with a minimum of 2 years of relevant experience; or Technical Diploma in Electrical Engineering with 3 4 years of relevant experience Proven hands-on experience in electrical systems, equipment, and maintenance Strong ability to diagnose, troubleshoot, and resolve electrical faults Experience conducting fieldwork and working directly with electrical systems and equipment Good knowledge of electrical safety standards, procedures, and best practices Strong analytical, problem-solving, and communication skills Willingness and ability to relocate to Najaf, Iraq is essential</p>

<p>Responsible of RNCs, BSCs, transport (IP &amp; microwave), CME/power maintenance in addition to Operation &amp; maintenance for all sites in area which including all bands 2G,3G &amp; LTE . Site configuration of parameters to follow RF requests, modify TR equipment s, and work on NET echo Field troubleshooting &amp; fix problem for TR microwave, RAN and CME/power. Support to the other department upon requests. Daily Check all BTS &amp; MW, CME clearance alarm, close TKT &amp; resolving and following up all pending issues. Acceptance and on-air new sites or expansions. Daily task O&amp;M follow up. follow up CME maintenance subcontractor. Team work &amp; CR implementations. Network performances &amp; KPI with outage follow up. Daily report to Cluster Supervisor.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>B.sc degree (Telecommunication Engineering or Electrical Engineering or equivalent degree).</li><li>Graduate or 1-year experience.</li><li>Having a Valid Engineers Union ID Card .</li></ul><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change .</p><p>Technical Competencies: Access Network Operations Network Monitoring Problem Solving Service Operations Center (SOC) Technical Writing and Reporting Troubleshooting &amp; Technical Problem Solving.</p>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design, install, commission, and maintain chilled &amp; frozen refrigeration systems ✅ Diagnose and resolve refrigeration system faults and technical issues ✅ Perform preventive and corrective maintenance to ensure optimal performance ✅ Monitor system efficiency and recommend energy-saving improvements ✅ Ensure compliance with safety regulations and industry standards ✅ Coordinate with clients, contractors, and project teams ✅ Prepare maintenance reports and technical documentation</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>✔ Bachelor's Degree/Diploma in Mechanical Engineering, Refrigeration Engineering, or a related field ✔ Proven experience with commercial or industrial chilled &amp; frozen refrigeration systems ✔ Strong knowledge of compressors, condensers, evaporators, cold rooms, and refrigeration controls ✔ Experience with ammonia (NH₃) and/or Freon-based systems is an advantage ✔ Ability to read technical drawings and troubleshoot complex refrigeration systems</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>About Zaincash ZainCash Iraq is a leading mobile wallet in Iraq and recognized as Forbes top Fintech company of 2023 and 2024 as well as GSMA’s Best Mobile Innovation Supporting Humanitarian Situations.<br> The company offers a range of consumer and business services including local and international money transfer, bill payments, companion payment cards, payroll, aid disbursement, and more.<br> For more information, please visit www.<br>zaincash.iq. Responsibilities: Conduct thorough testing of software applications (web and mobile) to ensure compliance with quality standards, Record test results.<br> Develop and execute comprehensive test plans, test cases, and test scripts to validate functionality, performance, and usability.<br> Identify, document, and report software defects; collaborate with developers to ensure timely resolution.<br> Perform regression testing to confirm that resolved issues remain fixed in subsequent releases.<br> Provide constructive feedback to improve overall software quality and user experience.<br> Collaborate with cross-functional teams (development, system administration, product management) to resolve technical challenges during the software development lifecycle.<br> Manage and prioritize incidents requiring specialized technical expertise based on business impact and severity Bachelor’s degree in computer science, Engineering, or related field, or equivalent work experience.<br> Minimum 1 year of experience in software quality assurance and testing methodologies.<br> Proven experience with web and mobile application testing.<br> Familiarity with Agile development methodologies and tools (e.<br>g., Jira, Scrum) is a plus.<br> Good understanding of software QA methodologies, tools, and processes.<br> For example manual testing, automated testing.<br> Experience with test automation frameworks and scripting languages (e.<br>g., Python, Shell) is a plus.<br> Proficiency in troubleshooting and diagnosing technical issues</span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Applying and following the client contractual QHSE obligations, PSGS’ QHSE policy and procedures.</p><p>• Maintaining the integrity of the ISO Management Documentation System and standards of ISO 9001, ISO 14001, ISO 22000, &amp; ISO 45001.</p><p>• Maintaining, repairing and installing plumbing and related fixtures and components, as well as appliances and trims.</p><p>• Repairing piping of various sizes and types.</p><p>• Checking safety equipment and replacing components such as washers, gaskets and filters.</p><p>• Inspecting, repairing or replacing pumps, valves and boiler systems.</p><p>• Monitoring work done by outside contractors for adherence to Plumbing Code Requirements and reporting back to direct manager.</p><p>• Installing supports and hangers for pipes, fixtures and equipment.</p><p>• Assembling and installing valves and fittings.</p><p>• Installing, repairing and maintaining water treatment equipment, piping and controls.</p><p>• Testing pipe systems and fixtures for leaks.</p><p>• Ensuring all installations, repairing and maintenance meet the requirements of the appropriate codes.</p><p>• Maintaining good relationship with the client to accomplish ongoing tasks in a timely manner.</p><p>• Ensuring all installations, repairs and maintenance meet environmental protection requirements.</p><p>• Maintaining appropriate service and repair records.</p><p>• Performing preventive/corrective maintenance and call-off activities on daily, weekly and monthly basis and ensuring that the company avoids any liquidated damages.</p><p>• Controlling the inventory for related equipment parts and supplies.</p><p>• Preparing Permit to Work and daily/weekly/monthly reports and sharing them with the management.</p><p>• Preparing estimation for call-off works and sharing it with the management.</p><p>• Coordinating with the client on regular basis for related works and assisting in completing the third-party request.</p><p>• Performing other duties as directed.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>·&nbsp;&nbsp;&nbsp;Diploma in Mechanical or Trade Certificate or a similar discipline</p><p>·&nbsp;&nbsp;&nbsp;5+ years in a similar role, Middle East experience preferred</p><p>·&nbsp;&nbsp;&nbsp;Must understand regulatory compliance and be able to maintain and submit any documentation required</p><p>·&nbsp;&nbsp;&nbsp;Fluent in English, Arabic is an added value</p><p>·&nbsp;&nbsp;&nbsp;Computer literate</p><p><br></p></div>

<p>Job Responsibilities:<br>1. Inspect machine room power distribution, UPS circuits, cabinet power distribution, earthing resistance and environmental facilities to confirm all weak current systems meet preconditions for power-on commissioning.<br>2. Organize standalone power-on, equipment configuration, protocol docking and point-by-point commissioning for airport integrated security, building automation, structured cabling, information network, information integration, security screening, baggage handling, clock, stand guidance, flight information display, public address, CCTV monitoring and perimeter alarm systems.<br>3. Arrange on-site attendance during full-airport weak current system trial operation; conduct daily inspections of platform online status, terminal online rate, link connectivity and equipment operating conditions.<br>4. Record a defect ledger during trial operation; continuously rectify issues including system lag, offline devices, false alarms, linkage failures and abnormal video images to ensure stable long-term operation of all weak current systems compliant with airport trial operation standards and support smooth operational transition.<br>5. Cooperate with the client, airport operation &amp; maintenance team and supervision consultants to conduct full-system function re-inspection, random point sampling and scenario linkage acceptance tests.<br><br>Job Requirements:<br>1. Bachelor’s degree or above, major in Electrical Engineering, Automation or related fields; graduates from 985/211 universities are preferred.<br>2. Fluent in English.<br>3. Minimum 3–5 years of commissioning and operational experience on at least one 4D or higher-class civil aviation airport.<br>4. Proficient in technical standards and specifications issued by ICAO (International Civil Aviation Organization) and CAAC (Civil Aviation Administration of China).<br>5. Capable of multi-system interface coordination; able to resolve issues involving system communication, protocol docking and building automation.<br>6. Experience in commissioning weak current systems, information integration, BHS baggage handling, security inspection, ATC, meteorology and related systems.<br>7. Strong communication and coordination skills, high sense of responsibility, excellent execution and team spirit.8. Good physical health and willingness to work overseas.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Piping Engineer - Materials (Iraq)<br><br><br><p><b><i>"</i></b><b><i>Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Title:</b>&nbsp;Senior Piping Engineer – Materials</p><br><br><p><b>Location:</b>&nbsp;Iraq - KBR office</p><br><br><p>28/28 rotation</p><br><br><br><p><b>Job Purpose</b></p><br><br><ul><li>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.</li><li>Single point of contact for Piping deliverables and Activities related to Piping Materials </li><li>Interface with client, Vendor and other stakeholders for successful execution of the project</li><li>Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.</li><li>Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</li></ul><br><p><b>Key Responsibilities</b></p><br><br><ul><li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li><li>Ensure compliance with applicable codes and standards and project-specific requirements.</li></ul><ul><li>Development of standard deliverables, various datasheets, and requisition packages related to piping.</li><li>Experience in Non-metallic Piping (GRE / HDPE) Procurement and specs.</li><li>Provide in-depth technical support for material selection involving metallic and Non-metallic piping systems.</li><li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li><li>Review and approve technical deliverables (isometrics, P&amp;IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li><li>Demonstrated knowledge of the Material Tracking throughout the project cycle.</li><li>Understand the MOC process and employ effective change management throughout the lifecycle of the project</li><li>Contribute to Lesson Learnt from the Project</li><li>Report to Department Manager/ Lead Engineer for the project.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>12+ years of experience in Concept, FEED and Detail Engineering and EPCM experience in the Oil &amp; Gas industry.</li><li>Experience in Middle East clients like ADNOC, BP, BOC, PDO, Total Energies &amp; Qatar Energies others are highly preferred.</li><li>Familiarity of Onshore and Offshore facilities and carried out Greenfield and Brownfield Projects.</li><li>Experience in working with multicultural project teams across the various project execution center’s</li><li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Master or Bachelor of Engineering in a related field.</li><li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li><li>Certification related to piping design or stress analysis is advantageous.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Strong background in piping design, engineering, stress analysis, and support design.</li><li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li><li>Technical experience to prepare manhours estimation for different types of piping activities &amp; deliverables of different phases of the project like Select phase, FEED &amp; Execution etc.</li><li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of Various facilities.</li><li>Hands on knowledge of codes and standards relevant to piping.</li><li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li><li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li><li>Knowledge of Interdisciplinary Work Processes/Interface/Deliverables</li><li>Responsible for the training and development of engineers in his/her Team.</li><li>Adherence to company processes and procedures and handle internal and external project audits.</li><li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li><b>Communication:</b>&nbsp;Clear, concise communication with technical and non-technical stakeholders.</li><li><b>Problem Solving:</b>&nbsp;Proactive identification and mitigation of piping-related risks.</li><li><b>Project Management:</b>&nbsp;Planning, scheduling, risk management, and deliverable tracking.</li><li><b>Influence &amp; Collaboration:</b>&nbsp;Effective collaboration with clients, vendors, and internal teams.</li><li><b>Adaptability:</b>&nbsp;Comfort in dynamic project environments and changing technical requirements.</li><li><b>Attention to Detail:</b>&nbsp;Rigorous approach to reviews, calculations, and documentation.</li><li><b>Safety Mindset:</b>&nbsp;Commitment to health, safety, and environment (HSE) standards.</li><li><b>Critical Thinking: </b>Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems</li></ul><br><br><br> </div>

<p >Skills : Project Engineer</p><p >Other Skills : Interface Engineer, interface principles, interface management. FEED, EPC, engineering interfaces, interface registers, interface matrices, interface issues, Oil and Gas, Petrochemical</p><p >Experience : 20 + Years</p><p >Education : Bachelors/3-5 yr Degree</p><p >Employment Type : Full Time Salaried Employee</p><p >Location : Iraq, Iraq</p><p >Qualifications and Experience</p><p >Education: Bachelor degree and above in Engineering.</p><p >Experience: Minimum 20 years of experience in large-scale oil, gas, refining, or petrochemical projects, with extensive exposure to FEED, EPC, and commissioning phases.</p><p >Competencies:</p><p >Strong understanding of multidisciplinary engineering interfaces</p><p >Proven ability to manage complex multi-contractor environments</p><p >Strong coordination, negotiation, and conflict resolution skills</p><p >Experience working with government authorities and licensors</p><p >Must have overseas work experience.</p><p >Fluent English (capable of using it as the operational language in daily work).</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>Job Responsibilities:</p><p>1. Review installation quality of ATC equipment and complete pre-power-on acceptance; verify power supply, signal links and earthing systems to meet civil aviation standards for equipment power-on commissioning.</p><p>2. Conduct standalone power-on, hardware self-test, program loading, parameter configuration and functional commissioning for VHF air-ground communication, intercom dispatching, ATC recording, secondary radar surveillance, surface surveillance and ATC automatic processing systems.</p><p>3. &nbsp;Perform cross-discipline joint commissioning across multiple systems to realize data interconnection, business linkage and signal synchronization among ATC automation, radar surveillance, air-ground communication and dispatching intercom systems.</p><p>4. Test main/standby redundancy switching, fault alarms, emergency switchover and business fault tolerance functions to ensure uninterrupted air traffic control operations.</p><p>5. Support flight calibration of ATC systems, track calibration parameters, optimize equipment settings and rectify non-compliant items to align with civil aviation operational technical standards.</p><p>6. &nbsp;Provide on-site support during the trial operation of full ATC systems; real-time monitor radar targets, air-ground communication channels, automated flight tracks and dispatching workstation status.</p><p>&nbsp;</p><p>Job Requirements:</p><p>1. Bachelor’s degree or above, major in Electrical Engineering, Automation or related fields; graduates from 985/211 universities are preferred.</p><p><strong>2. </strong>Fluent in English.</p><p><strong>3. </strong>3Minimum 3–5 years of commissioning and operational experience on at least one 4D or higher-class civil aviation airport.</p><p><strong>4. </strong>4Proficient in technical standards and specifications issued by ICAO (International Civil Aviation Organization) and CAAC (Civil Aviation Administration of China).</p><p><strong>5. </strong>Capable of multi-system interface coordination; able to resolve issues involving system communication, protocol docking and building automation.</p><p><strong>6. </strong>Experience in commissioning weak current systems, information integration, BHS baggage handling, security inspection, ATC, meteorology and related systems.</p><p>&nbsp;</p><p><strong>7. </strong>Strong communication and coordination skills, high sense of responsibility, excellent execution and team spirit.8. Good physical health and willingness to work overseas.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conduct thorough testing of software applications (web and mobile) to ensure compliance with quality standards, Record test results. Develop and execute comprehensive test plans, test cases, and test scripts to validate functionality, performance, and usability. Identify, document, and report software defects; collaborate with developers to ensure timely resolution. Perform regression testing to confirm that resolved issues remain fixed in subsequent releases. Provide constructive feedback to improve overall software quality and user experience. Collaborate with cross-functional teams (development, system administration, product management) to resolve technical challenges during the software development lifecycle. Manage and prioritize incidents requiring specialized technical expertise based on business impact and severity</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in computer science, Engineering, or related field, or equivalent work experience. Minimum 1 year of experience in software quality assurance and testing methodologies. Proven experience with web and mobile application testing. Familiarity with Agile development methodologies and tools (e.g., Jira, Scrum) is a plus. Good understanding of software QA methodologies, tools, and processes. For example manual testing, automated testing. Experience with test automation frameworks and scripting languages (e.g., Python, Shell) is a plus. Proficiency in troubleshooting and diagnosing technical issues</p><p></p></section>

<p>&nbsp;</p><p>The Iraqi Red Crescent Society (IRCS) announces its need for a Planning, Monitoring, Evaluation, Accountability, and Learning (PMEAL) Manager to lead and coordinate planning, monitoring, and evaluation operations, and to ensure the implementation of programs according to evidence, outcomes, the strategic plan, and International Movement standards. The job holder will be responsible for fostering a culture of learning and accountability, developing mechanisms for data collection, analysis, and feedback, coordinating with relevant departments, as well as supporting financial oversight, compliance, innovation, and continuous development.</p><p><strong>Job Summary</strong></p><p>The <strong>PMEAL Manager</strong> provides strategic leadership, oversight, and coordination for all planning, monitoring, evaluation, and learning functions at the Iraqi Red Crescent Society. This role ensures that the Society's programs and operations are evidence-based, results-oriented, accountable, and compliant with the IRCS strategic plan and movement standards.</p><p>The PMEAL Manager plays a pivotal role in embedding a culture of learning, coordinating strategic and operational planning, and establishing monitoring, evaluation, and feedback mechanisms across the organization. The PMEAL Manager works in close coordination with other departments under the Organizational Development Department, Human Resources, and Research and Development to ensure planning coordination, data sharing, and knowledge utilization. This role also supports financial oversight related to PMEAL program activities and contributes to adaptive management, ensuring compliance and the integration of innovation.</p><p><strong>Duties and Responsibilities</strong></p><p><strong>Planning and Performance Monitoring</strong></p><ul><li>Lead the development and review of the Society's annual strategic plan in coordination with the Organizational Development Department and branches.</li><li>Direct the consolidation process of strategic and operational planning at the branch level, ensuring consistency and alignment across departments.</li><li>Establish and maintain performance monitoring frameworks, dashboards, and key performance indicators (KPIs) to track progress towards institutional goals.</li><li>Coordinate with the Head of the Organizational Development Department and the Planning Officer to integrate operational indicators into the strategic decision-making process.</li></ul><p><strong>Monitoring, Evaluation, and Reporting</strong></p><ul><li>Develop and update PMEAL tools, methodologies, and guidance notes in line with movement and donor standards.</li><li>Oversee all monitoring and evaluation activities across projects and emergency responses, including baseline, mid-term, and final evaluations.</li><li>Ensure the integration of findings and recommendations from evaluations into program improvements and organizational development strategies.</li><li>Supervise the development of logical frameworks, result matrices, and monitoring plans for new proposals and projects.</li></ul><p><strong>Accountability to Affected Populations</strong></p><ul><li>Ensure the institutionalization of Core Humanitarian Standards (CHS) across the organization.</li><li>Oversee the design and implementation of accountability frameworks, including complaint and feedback mechanisms.</li><li>Ensure that feedback loops are closed and that lessons learned are documented and shared across departments.</li><li>Promote inclusive and participatory approaches, especially with women, youth, and vulnerable groups.</li></ul><p><strong>Learning and Knowledge Management</strong></p><ul><li>Develop and implement a learning agenda at the IRCS level in collaboration with the Head of the Organizational Development and Innovation Department.</li><li>Lead post-action reviews, real-time evaluations, and learning events at both headquarters and field levels.</li><li>Ensure that PMEAL findings inform policy updates, organizational development reforms, and strategy adjustments.</li></ul><p><strong>Coordination and Capacity Building</strong></p><ul><li>Supervise PMEAL staff at headquarters and coordinate with field PMEAL focal points across all branches.</li><li>Design and deliver customized training on PMEAL systems, tools, and methodologies.</li><li>Lead the coordination of the PMEAL program across different departments and represent PMEAL in relevant internal and external working groups.</li><li>Ensure the integration of PMEAL with the Information Management and Reporting Department to support data-driven decision-making and high-quality reporting.</li></ul><p><strong>Financial Oversight and Resources</strong></p><ul><li>Support the development of budgets related to PMEAL and ensure cost-efficiency across activities.</li><li>Monitor the use of PMEAL resources, staffing allocation, and donor compliance in collaboration with finance and grants teams.</li><li>Review partner project proposals and ensure adequate resources are allocated to PMEAL components.</li></ul><p><strong>Compliance, Protection, and Risk Management</strong></p><ul><li>Ensure all PMEAL activities are conducted in compliance with IRCS protection policies, 'do no harm' principles, and data protection standards.</li><li>Oversee risk mitigation in evaluation processes and ensure ethical data collection practices.</li><li>Participate in external audits, evaluations, and donor reviews as needed.</li></ul><p><strong>Other Duties</strong></p><ul><li>Contribute to strategic discussions at the Organizational Development Department level and pilot innovation projects.</li><li>Perform other relevant tasks assigned by the Head of the Organizational Development Department or the senior leadership of the Iraqi Red Crescent Society.</li></ul><p><strong>Employment Qualifications</strong></p><p><strong>Education/Training</strong></p><ul><li>Bachelor’s degree in Social Sciences, Development Studies, Public Administration, Statistics, Humanitarian Affairs, or a related field.</li><li>Specialized training in PMEAL systems, project cycle management, or results-based management is highly desirable.</li><li>Certifications in M&E, accountability, or data management (e.g., INTRAC, ALNAP, CHS Alliance) are an added value.</li></ul><p><strong>Experience/Technical Skills</strong></p><ul><li>At least 5 years of experience in PMEAL in humanitarian or development settings.</li><li>At least 3 years of experience in a senior leadership role in performance management and evaluation, preferably within a Red Cross/Red Crescent National Society or a similar organization.</li><li>Proven experience in strategic and operational planning processes, logical framework development, and performance monitoring.</li><li>A proven track record in designing and managing PMEAL systems, conducting evaluations, and applying mixed methods.</li><li>Proficiency in using electronic data collection platforms such as Kobo Toolbox, Excel, and Power BI.</li><li>Strong experience in accountability mechanisms, community engagement methodologies, and participatory monitoring practices.</li><li>Strong interpersonal and coordination skills, with experience working across departments, branches, and with external partners.</li><li>Ability to manage and lead diverse teams, build staff capacity, and foster organizational learning.</li></ul><p><strong>Language Requirements:</strong></p><ul><li><strong>Arabic: Fluent</strong> – for internal coordination, reporting, and interaction with branches and communities.</li><li><strong>English: Fluent</strong> – for donor reporting, international coordination, and collaboration with movement partners.</li></ul><p>&nbsp;</p><p>The final date for applications is 07/10/2026</p><p>&nbsp;</p><p>&nbsp;</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Rotating Mechanical Engineer to join its Iraq business unit focusing on developing and implementing preventive and predictive maintenance programs for rotating equipment.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><strong>Reports to:</strong> Construction Manager</p><br><p><i><strong>#Wood #Iraq #Basra #Rotating Mechanical Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Rotating Mechanical Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>Develop and implement preventive and predictive maintenance programs for rotating equipment.</span></li> <li><span>Lead root cause failure analysis (RCFA) and implement corrective actions.</span></li> <li><span>Monitor equipment performance and recommend improvements to enhance reliability and efficiency.</span></li> <li><span>Support condition monitoring activities (vibration analysis, thermography, oil analysis).</span></li> <li><span>Provide technical expertise during troubleshooting, overhauls, and major repairs.</span></li> <li><span>Review maintenance procedures, work packs, and job safety analyses (JSAs).</span></li> <li><span>Ensure compliance with OEM specifications, industry standards (API, ISO), and company procedures.</span></li> <li><span>Prepare maintenance plans, schedules, and spare parts lists for rotating equipment.</span></li> <li><span>Maintain accurate records of maintenance history, failure reports, and performance data.</span></li> <li><span>Support the development of equipment criticality assessments and risk-based maintenance strategies.</span></li> <li><span>Liaise with operations, planning, procurement, and engineering teams to ensure maintenance activities are aligned with production goals.</span></li> <li><span>Participate in HAZOPs, MOCs, and technical audits.</span></li> <li><span>Support audits, inspections, and regulatory compliance efforts.</span></li> <li><span>Provide rotating equipment expertise during facility shutdowns, turnarounds, and brownfield projects.</span></li> <li><span>Ensure that all work complies with health, safety, and environmental standards at West Qurna 1.</span></li> <li><span>Support the application of WQ1-FOD Policy in relation to the Drug and Alcohol policy, Company Ethics, Award conditions, etc, whilst respecting and protecting the personal rights of subordinates.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li><span>Bachelor’s degree in Mechanical Engineering or a related discipline.</span></li> <li><span>Minimum of 10 years’ experience specifically in Rotating Equipment Maintenance, preferably in oil &amp; gas and petrochemical sector.</span></li> <li><span>Certifications in vibration analysis (Category I/II) or RCA Training is a plus.</span></li> <li><span>Knowledge on the International Standard related to Mechanical, such as API 610, API 617, ANSI B73.1, ISO 5199, ISO 10816, etc.</span></li></ul><p><span><strong>Skills:</strong></span></p><br><ul> <li><span>Language English and Arabic Proficiency.</span></li> <li><span>Proficiency in reading and interpreting engineering drawings and specifications.</span></li> <li><span>Strong knowledge of rotating machinery design, operation, and maintenance.</span></li> <li><span>Strong knowledge of condition monitoring tools and analysis techniques.</span></li> <li><span>Good awareness in Safety Operations, Risk Assessment, and Best Practice Engineering.</span></li> <li><span>Problem Solving</span></li> <li><span>Excellent Communication and interpersonal skills.</span></li> <li><span>Understand and follow oral and written instructions; prepare clear and concise records, reports and other written materials.</span></li> <li><span>Continuous Improvement</span></li> <li><span>Ability to interact in a multi-cultural environment</span></li> <li><span>Demonstrated experience in liaising with third party contractors, business partners and local communities</span></li></ul><p><span><strong>Systems:</strong></span></p><br><ul> <li><span>Maximo / CMMS / Aconex</span></li> <li><span>Microsoft Offices</span></li></ul> </div>