وظائف مهندس تصميم ميكانيكي في العراق

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p>A. Welding Engineering & Procedure Control • Develop, review, and qualify WPS/PQRs in accordance with project requirements and code standards. • Manage Welder and Welding Operator Performance Qualification (WPQ) and continuity records. • Prepare Weld Maps, Welding Sequence Plans, and Technical Queries (TQs) for design discrepancies. B. Quality Assurance & NDT Control • Lead and supervise the QA/QC team; review and approve Inspection & Test Plans (ITPs) and NDT procedures (RT, UT, MT, PT). • Perform Root Cause Analysis (RCA) of welding failures and NCRs, and propose technical solutions to improve weld quality and productivity. • Interpret radiographic films (RTFI) and witness NDT activities on-site. C. Cross-Country Pipeline Specific Inspection & Execution (??????) • Perform comprehensive pipeline construction inspections along the Right-of-Way (ROW), strictly following API 1104, ASME B31.4/B31.8, and project specifications. • Conduct pre-weld inspections for pipe bevel preparation, root gap, fit-up tolerances, and alignment prior to the root pass. • Supervise field automatic/semi-automatic pipeline welding (GMAW/FCAW) used for large-diameter cross-country lines. • Monitor and verify pre-heat, inter-pass temperatures, and heat input across the pipeline spread to prevent hydrogen cracking. • Coordinate daily NDT activities along the pipeline (RT/AUT), ensuring timely defect identification and rectification. • Inspect field joint coating, holiday testing, and anti-corrosion systems on the girth welds. • Coordinate tie-in welding, lowering, and backfilling activities to maintain continuous construction quality. • Witness Hydrostatic Testing, pigging, and drying procedures for pipeline sections and final mechanical completion. • Maintain comprehensive pipeline weld records, NDT tracking logs, and repair registers for project audit and handover to the Client. D. Field Execution, HSE & Coordination • Provide daily technical support for on-site construction, resolving bottlenecks related to pipelines, piping, and structural work. • Liaise with clients, TPI, and subcontractors, and participate in weekly progress and quality meetings. • Ensure strict compliance with HSE policies (HAZOP, JSA) and issue Lessons Learned and quality feedback notices to the project teams.</p><p>• Minimum 15 years of extensive experience in the Oil & Gas industry, specifically in large-scale EPC projects and cross-country pipeline construction. • Proven hands-on experience in cross-country pipeline projects, including the supervision of automatic and semi-automatic welding spreads (e.g., GMAW/FCAW with Saturnax/Serimax systems), field joint coating, NDT (RT/AUT), and hydrostatic testing. • Demonstrated track record of working with major international operators such as TotalEnergies, Saudi Aramco, or equivalent in onshore pipeline and plant facilities. • Expert knowledge of applicable pipeline codes and standards: API 1104, ASME B31.4, B31.8, DNV-ST-F101, and NACE MR0175/ISO 15156. • Solid experience in field tie-in welding, in-service welding, hot tapping, and sour service environments. • In-depth understanding of pipeline pre-commissioning and commissioning procedures, including pigging and drying operations. • Proven experience in managing pipeline QA/QC data, RT film interpretation (RTFI), and final handover dossiers to meet strict client audit requirements.</p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p>The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects</li><li>Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of one (1) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines</li><li>Valid Driver s License</li></ul><p>Preferred:</p><ul><li>Degree/Associate Degree in Technical Field or Gas Turbine Systems</li></ul><p>Desired Characteristics:</p><ul><li>Ability to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking</li><li>Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: Superintendent power</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Location:</strong> Majnoon Oil Field, Iraq<br> <strong>Rotation:</strong> 28/28<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The Superintendent Power is responsible for leading, supervising, and coordinating all electrical power generation, distribution, and maintenance activities across the Majnoon Oil Field. This role ensures safe, reliable, and compliant operation of electrical systems supporting production facilities, camps, utilities, and critical infrastructure. Superintendent provides technical leadership, oversees site execution, and ensures alignment with KBR standards and client requirements.</p> <h4>Accountability / expectations</h4> <ul> <li>Oversee daily operation, maintenance, and troubleshooting of power generation units, HV/LV distribution networks, switchgear, transformers, MCCs, and protection systems.</li> <li>Ensure electrical systems operate within design parameters, safety limits, and reliability targets.</li> <li>Lead fault investigations, root-cause analysis, and corrective action implementation.</li> <li>Manage preventive and predictive maintenance programs to minimize downtime and extend asset life.</li> <li>Provide expert guidance on electrical engineering standards, power system design, and safe work practices.</li> <li>Ensure full compliance with KBR HSSE, electrical regulations, and international codes.</li> <li>Review and approve electrical work permits, isolation plans, energization procedures, and switching operations.</li> <li>Maintain accurate documentation, single line diagrams, load studies, and equipment records.</li> <li>Coordinate electrical construction, installation, commissioning, and upgrade activities across the field.</li> <li>Interface with engineering, construction, commissioning, and operations teams to ensure technical alignment.</li> <li>Verify contractor performance, quality of workmanship, and adherence to specifications.</li> <li>Support integration of new facilities into the existing power network.</li> <li>Supervise electrical supervisors, technicians, and contractors across multiple site locations.</li> <li>Ensure competency development, training, and mentoring of Iraqi national workforce.</li> <li>Promote a strong safety culture and enforce compliance with electrical safety rules and LOTO procedures.</li> <li>Liaise with Operations, Maintenance, HSSE, and Planning departments to ensure seamless power support for field activities.</li> <li>Monitor power system performance, load demand, and energy efficiency opportunities.</li> <li>Prepare daily, weekly, and monthly reports on electrical system status, outages, and maintenance KPIs.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree in Electrical Engineering</p> <h4>Experience</h4> <ul> <li>10+ years experience in electrical power systems within oil & gas, petrochemical, or heavy industrial environments.</li> <li>Strong knowledge of HV/LV systems, generators, protection relays, SCADA, and industrial electrical equipment.</li> <li>Proven experience in site-based leadership roles (Superintendent, Supervisor, Lead Engineer).</li> <li>Demonstrated ability to manage multi-disciplinary teams in remote field environments.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description - Construction supervisor – civil</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Iraqi nationals preferred</strong></p> <p>KBR is looking for a civil construction supervisor for 28/28 rotation to be based in Iraq.</p> <h4>Accountabilities and expectations:</h4> <ul> <li>Single point responsible for the safe execution of the defined work scope in the plant area.</li> <li>Understand and be responsible for managing the site safety rules for the defined plant area.</li> <li>Understand and be responsible for the scope to be executed including all the interfaces and safety requirements.</li> <li>The work scope can be a complete new multi-discipline area or a single discipline scope passing through numerous operational areas. Clear communication and understanding between operations and the construction team is paramount. The scope is managed, controlled and risk assessed by the permit to work.</li> <li>Can be responsible for managing a dedicated contractor workforce in the area or be part of an integrated team managing a combined resourced construction/commissioning team.</li> <li>Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work.</li> <li>Ensure a fully briefed workforce and operational staff including valid permits and risk assessments.</li> <li>Ensure accurate progress reporting of physical scope completion not based on man-hour estimate.</li> <li>Ensure raising technical queries associated with site design/operational changes.</li> <li>Ensure planning mobilization of vendors to ensure minimal non-productive time for these expensive personnel.</li> <li>Responsible for minimizing non-productive time of work execution by ensuring scope preparation is completed before mobilization of main workforce, material is on site, design scopes are approved and understood, surveys have been completed to confirm proposed execution is doable.</li> <li>Timely approval of construction work packs and associated safety certificates as authorized engineer.</li> <li>Participate in joint walk downs of systems for handover to commissioning and operations.</li> <li>Support the commissioning department for functional commissioning.</li> <li>Ensure all action items as stipulated by interface and SIMOPS memoranda of understanding with external entities and internal disciplines.</li> </ul> <h4>Education</h4> <p>Bachelor's or diploma degree, i.e. civil</p> <h4>Experience and skill set</h4> <ul> <li>Minimum 5 years’ experience in oil and gas related projects</li> <li>Minimum 3 years’ experience in oil and gas project delivery in a multi-discipline workforce</li> <li>Strong leadership and team building skills</li> <li>Supervisory experience</li> <li>Fluent English skills</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Project Engineer (Power)<br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><br><br><p><b>Job Title: Project Engineer - Power (Local Talent)</b></p><br><br><p><b>28/28 Basra.</b></p><br><br><br><p><b>Job Purpose: </b></p><br><br><p>To support project team in executing EPC and Call off Contractors works to manage, supervise, and execute site activities related to Overhead Transmission Line (OHTL) construction, and delivery of projects by coordinating technical activities, managing contractor and consultant interfaces and ensuring compliance with project requirements, Client standards, safety standards, quality requirements, applicable regulations and schedule targets. The role is primarily site-based in Iraq, with regular coordination with multi-disciplinary teams.</p><br><br><br><p><b>Key Responsibilities: </b></p><br><br><ul><li>Site Execution &amp; Supervision: Oversee construction activities for OHTL, ensure work is carried out as per approved drawings, method statements, and specifications and monitor contractor performance and productivity.</li></ul><ul><li>Project planning &amp; Execution: Plan and execute OHTL Projects (typically 33kV to 132kV or higher voltages) by coordinating with engineering, procurement, and construction teams. Monitor project milestones and deliverables.</li></ul><ul><li>Review construction schedules and ensure adherence to timelines, identify site constraints and propose mitigation measures and liaise with local authorities and stakeholders when required. Prepare and present regular progress reports to senior management and clients.</li></ul><ul><li>Quality Control: Ensure compliance with project specifications, standards (IEC/IEEE), and client requirements. Conduct inspections, audits, and ensure proper documentation of quality records.</li></ul><ul><li>Commercial &amp; Contract Support: Assist in quantity verification and BOQ tracking, support in variation claims and change orders and review subcontractor invoices and progress billing.</li></ul><ul><li>Testing &amp; Commissioning: Support pre-commissioning and commissioning activities, Coordinate energization readiness with client and grid authorities, Close out punch points and handover documentation.</li></ul><br><p><b>Qualifications:</b></p><br><br><ul><li>Bachelor’s degree in electrical engineering.</li><li>10 years of experience in high voltage (HV/EHV) transmission line projects related to oil and gas industry.</li><li>Experience in Middle East (preferably Iraq) is an advantage</li></ul><br><p><b>Key Skills:</b></p><br><br><ul><li>Experience in Majnoon Oil Field, Basra, Iraq is an advantage</li><li>Strong Knowledge of Overhead Transmission Line (OHTL) construction.</li><li>Experience in Contract management with Commercial awareness</li><li>Strong communication and coordination skills</li><li>Mandatory experience in Oil and Gas industry.</li><li>Strong problem-solving and decision-making skills under site conditions.</li><li>Ability to manage multiple stakeholders in a multicultural environment.</li><li>Proficiency in project management tools (e.g., Primavera P6, MS Project) is an advantage</li><li>Fluent in both English and Arabic language (written and spoken).</li><li>Good knowledge of International Standards (IEC/IEEE)</li></ul><br><br><br> </div>

<p>Under the overall guidance of the Project Manager and the direct supervision of the Lead Civil Engineer, the Civil Engineer is required to perform the following specific duties and responsibilities ensuring their effectiveness, transparency, and integrity:</p> <p>Plan, supervise, and manage the implementation of rehabilitation and/or construction works, ensuring alignment with project requirements, timelines, and budgets.</p> <p>Responsible for implementation and contributing to the preparation of the bill of quantities, as-built and construction drawings, Specifications and other engineering documents.</p> <p>Responsible for day-to-day site visit of the construction works, coordination with the contractors and suppliers according to the needs and requirements on site; Inspects and report on contractor s works in progress ensuring that the contractor meets client`s quality standards and implement the contract in accordance with the regulations.</p> <p>Provide support and guidance to the contractor and assists in resolving site problems, as necessary; Assist in the preparation of project plans, detailed schedules, and progress reports, and contribute to project closure activities and documentation.</p> <p>Responsible for supervision of site technical staff and consultants assigned to the project, and the assignment and monitoring of duties during the progress of works; Liaise with relevant government authorities, beneficiaries, and stakeholders to facilitate permits, secure approvals, and maintain effective working relationships.</p> <p>Embed sustainability dimensions including social and gender inclusion, as well as Health, Safety, Security, and Environmental (HSSE) aspects into the project during the design and construction phases; Ensure PSEA measures are implemented throughout the project implementation, as per the country PSEA action plan; Perform other related duties as required by the Project Manager.</p> <p>Supervise and monitor contractors setting-out and construction activities, ensuring full compliance with contract specifications, approved work plans, and project requirements in terms of scope, timeline, and budget; Conduct daily site visits to monitor work progress, identify issues, and propose practical engineering solutions in coordination with the Project Manager and Lead Civil Engineer; Responsible for preparation of progress reports on construction activities, according to the agreed timeframe of works and submission of such on a weekly basis to the Project Manager; Assess and report on the project closing plans, archiving of cost and progress report and hand over all related reports to the Project Manager; Evaluate and assess work schedules and programmes, including the comparison with the schedule baselines and reports to the Project Manager accordingly; Check all laboratory reports, operation and maintenance manuals, and keep records and report to the Project Manager accordingly; Assess the work activities of contractor/s, measure completed work, and make recommendations to the Project Manager for progress payments to contractors.</p> <p>Carry out on-site technical inspections and assessments to ensure that all construction activities comply with client`s quality standards and approved project specifications. Maintain accurate records and compile periodic and ad hoc reports in accordance with client`s procedures and reporting requirements.</p> <p>Conduct site inspections, testing, and quantity verification, and review/approve technical submittals including shop drawings, material approvals, and as-built documentation. Maintain records, compile periodic reports and any specific reports required by client`s standard procedures; Responsible for the preparation and verification of a database for the available materials shipped to the project, schedules of labor force, and monitoring of quality of such during the progress of works; Check, verify and approve the interim payments submitted by the Contractor/s and submit detailed reports to the Project Manager.</p> <p>Maintain accurate records of site activities, inspections, incidents and progress, ensuring timely submission of reports (weekly/monthly/quarterly). Support project closure through commissioning, handover and archiving of construction documentation. Assist in compiling periodic and specific reports, and ensure all project documentation is up-to-date and properly filed. Support the Project Team in overseeing change controls, risk and issue registers, and ensure timely and accurate reporting on project progress.</p> <p>Ensure that lessons learned and challenges are documented throughout the project implementation and shared with the project team; Participate in knowledge-sharing initiatives and contributing insights and lessons learned.</p> <p>Project reporting Civil Engineer will be reporting to Lead Civil Engineer and/or Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><h3>Key competencies</h3> <p>A minimum of 2 years of experience in development and coordination within agricultural, water resources , or related projects, particularly in irrigation (Open Channels and Closed Pipe System) and water-related activities, is required. Experience in site supervision, as well as monitoring and evaluation, is required. Experience working on international and/or local projects in conflict-affected areas is preferred. Experience in implementing and delivering projects for international organizations is considered an asset. Experience in report writing, data analysis, and document drafting is desirable. Experience in Health and Safety Management is desirable. Experience in quality assurance and quality control (QA/QC) for infrastructure projects is desirable. Experience working in the southern governorates is desirable.</p> <h3>Team management</h3> <p>This role has no team management</p> <h3>Further information</h3> <p>Disclaimer: At no stage of the recruitment process will CTG ask candidates for a fee. This includes during the application stage, interview, assessment and training. CTG has a zero tolerance to Sexual Exploitation and Abuse (SEA) which is outlined in its Code of Conduct. Protection from SEA is everyone s responsibility CTG encourages all candidates applying for this advertisement to ensure that their candidate profile is up to date with up to date experience / education / contact details, as this will help you being considered further in your application for this role.</p>

<p>The primary responsibility of the Mechanic Steam and Gas - is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures.</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments.</li><li>Dismantle and assemble machinery and equipment using a variety of hand, power, pneumatic and hydraulic tools.</li><li>Perform mechanical and electrical maintenance and repairs on power tools, hand tools and training equipment.</li><li>Move machinery and equipment using hoists, cranes, chain falls and trucks.</li><li>Align machinery and equipment using hoists, squares, rules, micrometers, plumb bobs, dial indicators and/or laser alignment equipment.</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches.</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects.</li><li>Load, transport, and unload materials, tools, equipment and supplies.</li><li>Availability to travel and be away from home for extended periods of time</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree or associate degree in Technical Field, Gas Turbine Systems Technician preferred</li><li>Must have a minimum of two (2) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines.</li><li>Must have experience performing equipment alignments using either laser or traditional methods.</li><li>Must have Driver s License</li><li>Must possess minimum required hand tools.</li></ul><p>Desired Characteristics:</p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Has solid skills acquired with trainings and required to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Good mechanical/technical skills.</li><li>Good oral communication skills and critical thinking ability.</li><li>May be required to handle time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<p><h4>Job description - Construction supervisor \u2013 civil<\/h4>\n<p><strong>Company:<\/strong> KBR Iraq<br>\nIraqi nationals preferred<\/p>\n<p>KBR is looking for a civil construction supervisor for 28\/28 rotation to be based in Iraq.<\/p>\n<p>\"Belong, connect, grow, with KBR!<br>\nThe KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br>\nKBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.\"<\/p>\n<h4>Accountabilities \/ expectations:<\/h4>\n<ul>\n<li>Single point responsible for the safe execution of the defined work scope in the plant area.<\/li>\n<li>Understand and be responsible for managing the site safety rules for the defined plant area.<\/li>\n<li>Will understand and be responsible for the scope to be executed including all the interfaces and safety requirements.<\/li>\n<li>The work scope can be a complete new multi-discipline area or a single discipline scope passing through numerous operational areas. Clear communication and understanding between operations and the construction team is paramount. The scope is managed, controlled and risk assessed by the permit to work.<\/li>\n<li>Can be responsible for managing a dedicated contractor workforce in the area or be part of an integrated team managing a combined resourced construction\/commissioning team.<\/li>\n<li>Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work.<\/li>\n<li>Ensure a fully briefed workforce and operational staff including valid permits and risk assessments.<\/li>\n<li>Ensure accurate progress reporting of physical scope completion not based on man-hour estimate.<\/li>\n<li>Ensure raising technical queries associated with site design\/operational changes.<\/li>\n<li>Ensure planning mobilization of vendors to ensure minimal non-productive time (NPT) for these expensive personnel.<\/li>\n<li>Responsible for minimizing NPT of work execution by ensuring scope preparation is completed before mobilization of main workforce, material is on site, design scopes are approved and understood on site, surveys have been completed to confirm proposed execution is doable.<\/li>\n<li>Timely approval of construction work packs and associated safety certificates as authorized engineer (AE).<\/li>\n<li>Participate in joint walk downs of systems for handover to commissioning and operations.<\/li>\n<li>Support to commissioning department for functional commissioning.<\/li>\n<li>Ensure all action items as stipulated by interface and SIMOPs memorandums of understanding (MOUs) with external entities and internal disciplines.<\/li>\n<\/ul>\n<h4>Education<\/h4>\n<p>Bachelor\u2019s or diploma degree, i.e. civil<\/p>\n<h4>Experience and skill set<\/h4>\n<ul>\n<li>Minimum 5 years\u2019 experience in oil and gas related projects<\/li>\n<li>Minimum 3 years\u2019 experience in oil and gas project delivery in a multidiscipline workforce<\/li>\n<li>Strong leadership and team-building skills<\/li>\n<li>Supervisory experience<\/li>\n<li>Fluent English skills<\/li>\n<\/ul><\/p><p><\/p>

<p>Launch Your Career as a Field Engineer with Weatherford Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs. This is more than just a job it s an adventure. You ll be working in the field, often at remote rig sites, where you ll gain unmatched experience and responsibility from day one. Whether it s assembling equipment, analysing data, or solving problems on the fly, you ll be at the heart of operations that matter. Your Development Journey You ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients Your day-to-day could include: Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs Analyse performance data and recommend improvements Manage equipment logistics and ensure seamless setup and operation at the rig site Create detailed post-job reports and share actionable insights with clients and internal teams Champion a culture of continuous improvement with a strong focus on safety, quality, and performance Deliver front-line engineering support to our customers throughout operations, resolving issues independently What We re Looking For Graduated with bachelor s degree in engineering (all fields) within the last 24 months No more than 1 year of experience English language fluent proficiency (written and spoken) Strong communication and interpersonal skills Ability to analyse complex problems, apply critical thinking, and make informed decisions A passion for hands-on work and learning in dynamic environments (onshore and offshore) What to Expect This role is physically and mentally demanding. You ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you re up for the challenge, the rewards are big. You ll join one of our specialized product lines, such as: Completions Drilling Services Wireline Services Artificial Lift Well Services Managed Pressure&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Graduated with bachelor s degree in engineering (all fields) within the last 24 months</li><li>No more than 1 year of experience</li><li>English language fluent proficiency (written and spoken)</li><li>Strong communication and interpersonal skills</li><li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li><li>A passion for hands-on work and learning in dynamic environments (onshore and offshore)</li></ul>

<p>Wood is recruiting for a Project Engineer (Local National Arabic Speaker) to join its Iraq business unit focusing on supporting a portfolio of construction based minor EPC and maintenance repair order projects. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement. Reports to: Senior Project Manager Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. Expected: Demonstrable experience in the management of multi-disciplined construction focused minor EPC and maintenance repair order projects. Practiced in project control mechanisms and with commercial and technical risk assessments Excellent communications skills. Practitioner in risk management processes. Strong effective delegation skills. Wood is recruiting for a Project Engineer (Local National Arabic Speaker) to join its Iraq business unit focusing on supporting a portfolio of construction based minor EPC and maintenance repair order projects. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement. Reports to: Senior Project Manager #Wood #Iraq #Kirkuk #Project Engineer The role This is an exciting opportunity for an experienced Project Engineer to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region. What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones Job Objectives: The objective of the role is to support a portfolio of construction biased minor EPC and maintenance repair order projects. This includes leading a small group of multi-discipline construction engineers and subcontractors where applicable to complete the full lifecycle of the project following the Project Management Framework. Accountable for: Delivery of a portfolio of minor EPC and maintenance repair order projects Management and coordination of local supply chain partners Project execution and governance compliance Defining project execution strategies Application of project change control practices and procedures Monitoring and control of portfolio performance Maintaining cost awareness by all project personnel throughout all phases of project execution Ownership of project reporting Leadership and management of their project portfolio Identifying and managing critical issues Proactive risk management and reporting Preparation of Early Warning Notices and Compensation Events Responsible for:&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p>Demonstrable experience in the management of multi-disciplined construction focused minor EPC and maintenance repair order projects. Practiced in project control mechanisms and with commercial and technical risk assessments Excellent communications skills. Practitioner in risk management processes. Strong effective delegation skills.</p>

<p><b>Role: Quantity Surveying</b></p><p>Industry Type: Engineering &amp; Construction</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Surveying</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Strong expertise in quantity take-off and construction measurement.</li><li>Ability to interpret IFC drawings, P&amp;IDs, Isometrics, Layouts, SLDs, MTOs, and technical specifications.</li><li>Sound knowledge of Civil, Structural, Mechanical, Piping, Electrical, and Instrumentation works.</li><li>Experience with Lump Sum, Remeasurement, Unit Rate, and Provisional Sum contracts.</li><li>Strong understanding of BOQ preparation, reconciliation, progress measurement, and certification.</li><li>Experience in evaluating variations, claims, and change management.</li><li>Excellent knowledge of MS Excel; ERP, Cost Control, and Document Control system experience is an advantage.</li></ul>

<p><strong>About the company:</strong></p><p>iMaker Group is a renowned for its expertise in luxury villas, hospitality, and commercial developments.&nbsp;</p><p>We are a dynamic consortium of companies offering comprehensive services in master planning, architecture, interior design, construction, project management, and the sourcing of furniture and materials.&nbsp;</p><p>With operations spanning Dubai, London, Riyadh, Miami, and Cairo. iMaker Group delivers diverse projects on a global scale.&nbsp;<br>&nbsp;</p><p><strong>Summary of the role:</strong></p><p>The Project Manager will be responsible for overseeing finishing tasks in construction projects, including coordinating with design teams, managing budgets, sourcing and inspecting materials, and ensuring compliance with project specifications. It requires liaising between contractors, suppliers, and owners, monitoring the implementation of key construction phases, and ensuring quality across interior and exterior works.</p><p>&nbsp;</p><p><strong>Key responsibilities:</strong></p><ul><li>Collaborate with the team to understand design specs and create detailed finishing schedules.</li><li>Assist in developing and managing the finishing budget, tracking expenses and variances.</li><li>Source, procure, and inspect materials for quality and compliance with project requirements.</li><li>Coordinate with contractors and owners, securing material samples and reviewing offers.</li><li>Act as a liaison between design teams, subcontractors, and suppliers; provide regular updates.</li><li>Oversee project implementation, including contractor offers, scheduling, planning, and material approval. Review and approve shop drawings and supervise key construction works (excavation, carpentry, concrete, insulation, etc.), ensuring quality and compliance with engineering drawings.</li><li>Oversee all finishing tasks, including exterior and interior works (facades, plastering, painting, woodwork, electrical, plumbing, HVAC, landscaping, pool, etc.) to ensure it meets design specifications and industry standards.</li><li>Verify executed quantities and coordinate overlapping works.</li><li>Enforce safety protocols and ensure compliance with local building codes and regulations.</li><li>Identify and resolve issues in finishing work, proposing solutions to improve efficiency.</li><li>Maintain accurate records of progress, inspections, and change orders; generate required reports.</li><li>Supervise and guide subcontractors and laborers, fostering a productive work environment.</li><li>Draft and audit contracts, review schedules, and ensure timely work completion.</li><li>Manage work receipt with proper documentation and owner approval.</li><li>Submit daily and weekly progress reports to Line Manager.</li><li>Perform other duties as assigned by Management.</li><li>Stay informed on the latest trends, materials and technology in the design industry to keep our projects at the forefront of innovation.</li></ul><p>&nbsp;</p><p><strong>Education and Experience:</strong></p><ul><li>Bachelor’s degree in Architecture, Construction Management, or Civil Engineering field.</li><li>Project Management Professional (PMP) or equivalent is preferable.</li><li>12+ years of professional experience in Project Management with a focus on high-end projects working on budgets, procurement, and coordinating with contractors and design teams.</li></ul><p>&nbsp;</p><p><strong>Knowledge, Skills and Abilities:</strong></p><ul><li>Proficient in using AutoCAD, SketchUp, and Project management software.</li><li>Arabic speaking is a must.</li><li>Strong project management, organizational, and budgeting skills.</li><li>Proven track record of delivering interior and exterior projects.</li><li>Strong leadership and team coordination abilities.</li><li>Excellent client-facing communication skills.</li><li>Creative and strategic mindset with ability to think innovatively and execute complete design concepts.</li><li>Proactive in identifying and resolving project issues.</li><li>Strong organizational and multitasking abilities, with a high attention to detail.</li></ul><p>&nbsp;</p><p><strong>Working conditions and Environment:</strong></p><ul><li>The position is site based in Baghdad, Iraq.</li><li>The position may have occasional international travel requirements.</li></ul><p>&nbsp;</p><p><strong>Success Metrics &amp; KPIs:</strong></p><ul><li>Client Satisfaction score after handover: Client feedback score after milestones/handover.</li><li>Weekly progress reporting: Timely submission of accurate weekly site reports.</li><li>Budget and material control: Actual project cost vs. approved budget.</li><li>Project completion on schedule: % of project milestones achieved on or before planned dates.</li><li>Subcontractor performance management: Evaluate subcontractors based on quality, timeline, and coordination.</li><li>Problem-solving &amp; escalation: Timely identification and resolution of site issues.<br>&nbsp;</li></ul><p><strong>What We Offer?</strong></p><ul><li>Opportunities to work on high-profile, international projects.</li><li>A chance to work in a collaborative, creative work environment that fosters innovation.</li><li>Opportunities for career growth and professional development.</li><li>Competitive salary and benefits package.</li></ul>