وظائف مهندس ميكانيكا سيارات في العراق

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div><span >Job description</span></div><div><span >CTG overview<span > </span></span></div><div><span >CTG was established in 2006, almost 20 years ago, in Afghanistan. We currently operate in 35 countries and have approximately 11,500 staff members committed to good!</span></div><div><span ><br></span></div><div><span >But do you know who we are? And what do we do?</span></div><div><span ><br></span></div><div><span >We provide tailored Human Resources and Staffing Solutions that support critical global initiatives across Humanitarian and Development sectors, and are now strategically foraying into new industries, including Construction, Energy, and IT, with a focus on high-risk regions.</span></div><div><span ><br></span></div><div><span >Here’s a list of services we offer:</span></div><div><span >•Staffing solutions and HR management services</span></div><div><span >•Monitoring and evaluation</span></div><div><span >•Fleet management and logistics</span></div><div><span >•Facilities management</span></div><div><span >•Sustainability and Communications Advisory</span></div><div><span >•Election monitoring and observation</span></div><div><span >•IT professional services</span></div><div><span >•Medical assistance</span></div><div><span ><br></span></div><div><span >Visit www.ctg.org to find out more.</span></div><div><span ><br></span></div><div><span >Overview of position<span > </span></span></div><div><span >Title:&nbsp; &nbsp;Civil Engineer</span></div><div><span ><br></span></div><div><span >Duty station:&nbsp; Southern governorates of Muthanna, Qadisiya, Missan and Thi Qar in Iraq&nbsp;&nbsp;</span></div><div><br></div><div><span ><br></span></div><div><span >Role objectives<span > </span></span></div><div><span >The project will be implemented in the four southern governorates of Muthanna, Qadisiya, Missan&nbsp;</span></div><div><span ><br></span></div><div><span >and Thi Qar in Iraq. The overall Smallholder Agriculture Revitalization Project (SARP) aims at&nbsp;</span></div><div><span ><br></span></div><div><span >assisting rural people overcome poverty and achieve food security through remunerative,&nbsp;</span></div><div><span ><br></span></div><div><span >sustainable and resilient livelihoods. It consists of two main components namely; (1) Climate&nbsp;</span></div><div><span ><br></span></div><div><span >Resilient Investments; and (2) Agriculture &amp; Livelihood Diversification. The first component&nbsp;</span></div><div><span ><br></span></div><div><span >includes two sub components; (1.1) modernization/rehabilitation of Irrigation Infrastructure&nbsp;</span></div><div><span ><br></span></div><div><span >schemes and (1.2) Knowledge Management and Institutional strengthening. The first&nbsp;</span></div><div><span ><br></span></div><div><span >sub-component (1.1.) aims at addressing the growing scarcity of irrigation water. The Project’s&nbsp;</span></div><div><span ><br></span></div><div><span >overall objective is to contribute to the revitalization of agriculture while building resilience to&nbsp;</span></div><div><span ><br></span></div><div><span >climate change in the Southern Governorates in Iraq. The Project has the three following specific&nbsp;</span></div><div><span ><br></span></div><div><span >objectives: Water Management - Increase water availability and irrigation efficiency to sustain&nbsp;</span></div><div><span ><br></span></div><div><span >water supply for agricultural production in the selected governorates Climate Change - Mitigate the&nbsp;</span></div><div><span ><br></span></div><div><span >impact of climate change namely the reduction in precipitation and increasing water scarcity by&nbsp;</span></div><div><span ><br></span></div><div><span >supporting irrigated agricultural production Agriculture - Enhance the profitability of the supported&nbsp;</span></div><div><span ><br></span></div><div><span >small farms/agri-businesses in order to contribute to the improvement of the income of the rural&nbsp;</span></div><div><span ><br></span></div><div><span >vulnerable farmers our client will be responsible for the design and rehabilitation works of the&nbsp;</span></div><div><span ><br></span></div><div><span >irrigation infrastructure schemes such as the lining of dried up water canals, supply and lay out of&nbsp;</span></div><div><span ><br></span></div><div><span >closed irrigation systems and rehabilitation of pumping stations.&nbsp;</span></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>A Bachelor's degree from a recognized university in Water Resources Engineering, Civil Engineering, Environmental Engineering, or Construction Management is highly desirable.</li><li>A Master's degree from a recognized university in one of the above-mentioned fields is desirable.</li><li>Required Membership of the Iraqi Engineers Association</li><li>Prince2, PMP or similar project management certification is an asset</li><li>A minimum of 2 years of experience in development and coordination within agricultural, water resources , or related projects, particularly in irrigation (Open Channels and Closed Pipe System) and water-related activities, is required.</li><li>Experience in site supervision, as well as monitoring and evaluation, is required.</li><li>Experience working on international and/or local projects in conflict-affected areas is preferred.</li><li>Experience in implementing and delivering projects for international organizations is considered an asset.</li><li>Experience in report writing, data analysis, and document drafting is desirable.</li><li>Experience in Health and Safety Management is desirable.</li><li>Proficiency in computer-aided design software, particularly AutoCAD, is desirable.</li><li>Experience in quality assurance and quality control (QA/QC) for infrastructure projects is desirable.</li><li>Experience working in the southern governorates is desirable.</li><li>Fluency in English and Arabic is required.</li></ul><p></p></section>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Piping Engineer - Materials (Iraq)<br><br><br><p><b><i>"</i></b><b><i>Belong, Connect, Grow, with KBR! </i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Title:</b>&nbsp;Senior Piping Engineer – Materials</p><br><br><p><b>Location:</b>&nbsp;Iraq - KBR office</p><br><br><p>28/28 rotation</p><br><br><br><p><b>Job Purpose</b></p><br><br><ul><li>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.</li><li>Single point of contact for Piping deliverables and Activities related to Piping Materials </li><li>Interface with client, Vendor and other stakeholders for successful execution of the project</li><li>Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.</li><li>Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</li></ul><br><p><b>Key Responsibilities</b></p><br><br><ul><li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li><li>Ensure compliance with applicable codes and standards and project-specific requirements.</li></ul><ul><li>Development of standard deliverables, various datasheets, and requisition packages related to piping.</li><li>Experience in Non-metallic Piping (GRE / HDPE) Procurement and specs.</li><li>Provide in-depth technical support for material selection involving metallic and Non-metallic piping systems.</li><li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li><li>Review and approve technical deliverables (isometrics, P&amp;IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li><li>Demonstrated knowledge of the Material Tracking throughout the project cycle.</li><li>Understand the MOC process and employ effective change management throughout the lifecycle of the project</li><li>Contribute to Lesson Learnt from the Project</li><li>Report to Department Manager/ Lead Engineer for the project.</li></ul><br><p><b>Experience</b></p><br><br><ul><li>12+ years of experience in Concept, FEED and Detail Engineering and EPCM experience in the Oil &amp; Gas industry.</li><li>Experience in Middle East clients like ADNOC, BP, BOC, PDO, Total Energies &amp; Qatar Energies others are highly preferred.</li><li>Familiarity of Onshore and Offshore facilities and carried out Greenfield and Brownfield Projects.</li><li>Experience in working with multicultural project teams across the various project execution center’s</li><li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Master or Bachelor of Engineering in a related field.</li><li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li><li>Certification related to piping design or stress analysis is advantageous.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Strong background in piping design, engineering, stress analysis, and support design.</li><li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li><li>Technical experience to prepare manhours estimation for different types of piping activities &amp; deliverables of different phases of the project like Select phase, FEED &amp; Execution etc.</li><li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of Various facilities.</li><li>Hands on knowledge of codes and standards relevant to piping.</li><li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li><li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li><li>Knowledge of Interdisciplinary Work Processes/Interface/Deliverables</li><li>Responsible for the training and development of engineers in his/her Team.</li><li>Adherence to company processes and procedures and handle internal and external project audits.</li><li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li><b>Communication:</b>&nbsp;Clear, concise communication with technical and non-technical stakeholders.</li><li><b>Problem Solving:</b>&nbsp;Proactive identification and mitigation of piping-related risks.</li><li><b>Project Management:</b>&nbsp;Planning, scheduling, risk management, and deliverable tracking.</li><li><b>Influence &amp; Collaboration:</b>&nbsp;Effective collaboration with clients, vendors, and internal teams.</li><li><b>Adaptability:</b>&nbsp;Comfort in dynamic project environments and changing technical requirements.</li><li><b>Attention to Detail:</b>&nbsp;Rigorous approach to reviews, calculations, and documentation.</li><li><b>Safety Mindset:</b>&nbsp;Commitment to health, safety, and environment (HSE) standards.</li><li><b>Critical Thinking: </b>Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems</li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><strong>Launch Your Career as a Field Engineer with Weatherford</strong> &nbsp;</p><br><p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our&nbsp;cutting-edge&nbsp;technologies and the real-world challenges faced in oil and gas rigs. &nbsp;</p><br><p>This is more than just a job —&nbsp;it’s&nbsp;an adventure.&nbsp;You’ll&nbsp;be working in the field, often at remote rig sites, where&nbsp;you’ll&nbsp;gain unmatched experience and responsibility from day one. Whether&nbsp;it’s&nbsp;assembling equipment, analysing data, or solving problems on the fly,&nbsp;you’ll&nbsp;be at the heart of operations that matter. &nbsp;</p><br><p><strong>Your Development Journey</strong> &nbsp;</p><br><p>You’ll&nbsp;be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience: &nbsp;</p><br><ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global&nbsp;centers. Travel may be needed to gain real-world experience&nbsp;</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training&nbsp;</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients&nbsp;</li></ul><p><strong>Your day-to-day could include: </strong>&nbsp;</p><br><ul> <li>Prepare, deploy, and&nbsp;operate&nbsp;advanced downhole tools to meet specific wellsite objectives&nbsp;</li> <li>Utilize&nbsp;cutting-edge&nbsp;simulation software to design and&nbsp;optimize&nbsp;wellsite solutions tailored to client needs&nbsp;</li> <li>Analyse performance data and recommend improvements &nbsp;</li> <li>Manage equipment&nbsp;logistics&nbsp;and ensure seamless setup and operation at the rig site&nbsp;</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams&nbsp;</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance&nbsp;</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently&nbsp;</li></ul><p>&nbsp;<strong>What&nbsp;We’re&nbsp;Looking For</strong> &nbsp;</p><br><ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months&nbsp;</li> <li>No more than 1 year of experience&nbsp;</li> <li>English language fluent&nbsp;proficiency&nbsp;(written and spoken)&nbsp;</li> <li>Strong communication&nbsp;and interpersonal skills&nbsp;</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions&nbsp;</li> <li>A passion for hands-on work and learning in dynamic environments (onshore and offshore)&nbsp;</li></ul><p><strong>What to Expect</strong> &nbsp;</p><br><p>This role is physically and mentally demanding.&nbsp;You’ll&nbsp;work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if&nbsp;you’re&nbsp;up for the challenge, the rewards are big. &nbsp;</p><br><p>You’ll&nbsp;join one of our specialized product lines, such as: &nbsp;</p><br><ul> <li>Completions &nbsp;</li> <li>Drilling Services &nbsp;</li> <li>Wireline Services &nbsp;</li> <li>Artificial Lift &nbsp;</li> <li>Well Services &nbsp;</li> <li>Managed Pressure Drilling…and many more &nbsp;</li></ul><p><strong>Why Join Us?</strong> &nbsp;</p><br><ul> <li>Fast-track your career with structured development and mentorship &nbsp;</li> <li>Work with&nbsp;cutting-edge&nbsp;technology in real-world settings &nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services &nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more &nbsp;</li></ul><p>Ready to engineer your future? Apply now and start your journey with Weatherford&nbsp;</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Interface Engineer<br><br><p><b>Job Description</b></p><br><br><p>Division: CSSP (Ratawi Hub – Iraq) </p><br><br><p>Direction&nbsp;: IM</p><br><br><p><b>Job title: Lead Interface Engineer</b></p><br><br><p><b>Situation in organization</b></p><br><br><p>Within the Project Organization, the Lead Interface Engineer is reporting to the Interface Manager</p><br><br><p>Job Location(s): CPP Office (Abu Dhabi, UAE) during Detailed Engineering Phase / SITE (Iraq) during Construction Phase</p><br><br><p><b>Job dimensions</b></p><br><br><p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p><br><br><ul><li>take care of the overall Management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule &amp; commercial issues arising from such interfaces and changes</li><li>ensure that Interfaces Management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration</li></ul><p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p><br><br><p><b>Activities</b></p><br><br><p>The job holder shall assist the Interfaces Manager:</p><br><br><ul><li>with the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/ Contractors.</li><li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li><li>Attend major interface meetings, internal and external with other entities of CSSP Project, Contractor representatives, Vendors, TotalEnergies specialists, Partner’s experts, etc. Lead interface and other technical meetings as required.</li><li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li><li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks specially schedule &amp; commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li><li>Preparing technical papers to support management positions for clarifications / decisions with regulatory authorities of host countries, other entities or partners.</li><li>Ensure that EPC Contractor implements required interface management system &amp; resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li><li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li><li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li><li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li><li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li><li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate to definition and resolution.</li></ul><p><b>Context and environment</b></p><br><br><br><p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p><br><br><ul><li>Site development and non-process facilities.</li><li>Ancillaries and buildings.</li><li>Seawater intake and outfall structures.</li><li>Material off-loading facility.</li><li>Seawater clarification, filtration and deoxygenating processes.</li><li>Chemical addition systems.</li><li>Shipping pumps.</li><li>Power Generation.</li><li>Utilities.</li></ul><p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p><br><br><p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p><br><br><br><p><b>Accountabilities</b></p><br><br><ul><li>Accountable for the interfaces and MoC, being internal (between units, disciplines, PMT, One Tech and Specialists) or external (between other CSSP Projects, Contractors, COMPANY, etc…). The job holder coordinates all interface and MoC matters, protecting the WI Project and COMPANY’s position with regards to all external interfaces and to internal interfaces between Contractors, and ensuring that changes are evaluated and executed for the overall benefit of the Project.</li><li>Accordingly, the job holder shall make the necessary coordination between all involved Contractors/parties and Company Teams and implement an agreed interface management procedure and methodology. She/He shall ensure the proper and timely follow-up and resolution of interfaces issues between the various involved parties documents. She/He must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with Project aspects to justify or reject the change.</li><li>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</li><li>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</li></ul><br><p><b><u>Qualification:</u></b></p><br><br><ul><li><span>Degree in</span> Engineering</li></ul><p><b><u>Experience: </u></b></p><br><br><ul><li>15 years of relevant experience in Industrial Projects.</li><li>A sound multi-discipline technical background complemented by a sound knowledge on Onshore Surveys campaigns and civil works experience.</li><li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li><li>Mastering English is a must, knowledge of French and Arabic is a plus.</li></ul><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Project Engineer is responsible to oversee and manage projects, ensuring they are completed safely, efficiently, and within budget constraints. This role involves coordinating with various stakeholders, including architects, engineers, contractors, and subcontractors, to plan and execute activities effectively. The Project Engineer is responsible for ensuring that project specifications and quality standards are met while adhering to project timelines. Additionally, they play a key role in monitoring project progress, identifying and addressing any issues or risks, and providing regular updates to stakeholders. Ultimately, the job purpose of a Project Engineer is to facilitate the successful completion of projects while maintaining high standards of quality and safety.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Assist in project planning, scheduling, and coordination to ensure projects are completed on time and within budget.</p><br> <p>Review project specifications, drawings, and contracts to ensure compliance with design requirements and contractual obligations.</p><br> <p>Coordinate with architects, engineers, contractors, and subcontractors to resolve technical issues and ensure smooth project execution.</p><br> <p>Procure materials, equipment, and services required for operational activities, ensuring timely delivery and adherence to project specifications.</p><br> <p>Monitor progress, inspect work quality, and identify potential risks or delays, taking proactive measures to mitigate them.</p><br> <p>Prepare and maintain project documentation, including reports, drawings, change orders, and RFIs, to track project progress and ensure accurate record-keeping.</p><br> <p>Assist in cost estimation, budget management, and financial reporting to monitor project expenses and ensure cost-effectiveness.</p><br> <p>Coordinate with regulatory agencies to obtain necessary permits, approvals, and inspections, ensuring compliance with building codes and regulations.</p><br> <p>Communicate regularly with project stakeholders, including clients, consultants, and project teams, to provide updates on project status and address any concerns.</p><br> <p>Participate in project meetings, contribute to problem-solving discussions, and provide technical expertise and support to ensure project success.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>proficiency in construction project management methodologies and techniques.</p><br> <p>Strong understanding of construction principles, techniques, and materials.</p><br> <p>Ability to read and interpret construction drawings, blueprints, and specifications.</p><br> <p>Excellent communication and interpersonal skills for effective collaboration with project teams and stakeholders.</p><br> <p>Problem-solving abilities to address challenges and find innovative solutions during project execution.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Project Planning L3<br>Construction Budgeting L3<br>Commercial &amp; Residential Construction L3<br>Contingency Workforce Management L3<br>Project Management L3<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA)<br>Bachelor's Degree in Civil Engineering or Engineering<br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Datacenter engineer is to ensure the optimal performance, reliability, and security of datacenter infrastructure while managing resources effectively to support business operations. They are responsible for maintaining system uptime, troubleshooting issues, and implementing improvements to enhance efficiency and scalability. Oversee the installation, configuration, and maintenance of hardware and software components within the datacenter. Ensure that all facility systems operate efficiently and effectively. Continuously monitor system performance and health using appropriate tools. Diagnose and resolve issues promptly to minimize downtime and service disruptions. Maintain security protocols and ensure compliance with industry standards and regulations. Conduct regular audits and assessments to identify vulnerabilities and mitigate risks. Create and maintain accurate documentation of systems, processes, and procedures. Generate regular reports on system performance, incidents, and maintenance activities. Work closely with cross-functional teams and communicate effectively with stakeholders, including operations, network, and security, to ensure seamless integration of systems.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>BSc Electrical engineer . Technical knowledge [Power, Generator and cooling] Incident Management Project Management Communication and Collaboration . 3 5-year experiences . Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change . Technical Competencies: Access network operations Data Centre operation and maintenance Technical writing and reporting Troubleshooting and technical problem solving Network monitoring Data Center Infrastructure Networking</p><p></p></section>

<p>We are seeking an experienced Procurement and Tendering Engineer with a strong background in the oil and gas industry to join our team.&nbsp;</p><p>The ideal candidate will manage procurement processes and tendering activities to support various projects, ensuring compliance with industry standards and optimal supplier management.&nbsp;</p><p>&nbsp;</p><p><strong>Key Responsibilities:</strong></p><p>Oversee the entire procurement lifecycle for oil and gas projects, including sourcing, negotiation, and contract management.</p><p>Develop and implement procurement strategies tailored to the specific needs and challenges of oil and gas operations</p><p>Evaluate and select suppliers based on technical capabilities, pricing, and adherence to safety and regulatory standards</p><p>Prepare, review, and manage technical and commercial tender documentation for oil and gas projects</p><p>Collaborate with project managers and engineering teams to identify procurement needs effectively</p><p>Ensure compliance with industry regulations, company policies, and quality standards.</p><p>Monitor and report on procurement activities and tender progress.&nbsp;</p><p>&nbsp;</p><p><strong>Qualifications:</strong></p><p>Bachelor's degree in Engineering (Petroleum, Mechanical, Chemical, or related field).</p><p>Minimum of 5 years of experience in procurement and tendering within the oil and gas sector.</p><p>Strong understanding of oil and gas industry practices, standards, and regulatory requirements.</p><p>Excellent negotiation, analytical, and problem-solving skills</p><p>Proficiency in procurement software and tools relevant to the oil and gas industry</p><p>Strong communication and interpersonal skills.&nbsp;</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Ensure all welding activities are performed in compliance with project specifications, approved procedures, applicable codes, and company requirements. Review and approve WPSs, PQRs, and welder qualification records. Monitor field welding activities, including fit-up, welding parameters, consumables, heat input, and workmanship. Coordinate with Construction, QC, NDE, Contractors, and Vendors to ensure quality execution of welding activities. Support welding qualification, testing, inspection, and audit activities at fabrication yards and construction sites. Review and assist in the resolution of Technical Queries (TQs), Deviation Requests (DRs), and Non-Conformance Reports (NCRs). Assess contractor welding performance and identify opportunities for quality and productivity improvements. Ensure welding traceability, documentation, and records are maintained for project quality dossiers. Promote HSE compliance and safe welding practices across all work fronts. Provide regular reporting on welding performance, issues, and risks to project management.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Qualifications</h2>Engineering degree in a relevant discipline or International Welding Engineer (IWE/IIW) qualification. Minimum 20 years of Oil &amp; Gas project experience. Minimum 10 years in a Welding Engineer or similar role. Strong knowledge of API 1104, ASME, DNV, and other relevant welding standards. Proven experience with welding procedures, qualifications, and field supervision activities. Solid understanding of pipeline, flowline, piping, and structural welding. Experience working on large-scale EPC or construction projects in the Oil &amp; Gas industry. Strong analytical, communication, and stakeholder management skills. Fluent English communication skills; Arabic language skills are advantageous. Willingness to work on a 4x4 rotational assignment in Iraq<p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>The Customer Support Engineer (IT) – Technology Business will be responsible for providing technical and customer support services for premium technology products and solutions across Iraq.<br> The role focuses on handling customer inquiries and complaints, coordinating service requests, ensuring timely issue resolution, and maintaining high levels of customer satisfaction.<br> The incumbent will manage customer communication, coordinate with service engineers for call assignments, support invoicing and payment follow-ups, maintain service documentation, and contribute to customer engagement initiatives while ensuring smooth service operations for the Technology Business.<br> Key Qualifications: • Strong experience in customer support, IT support, technical service coordination, or helpdesk operations within the technology or consumer electronics industry.<br> • Good understanding of handling customer inquiries, complaints, and service requests professionally and efficiently.<br> • Ability to attend customer calls, prioritize service requests, and coordinate with engineers for timely resolution.<br> • Strong customer service orientation with focus on maintaining customer satisfaction through continuous communication and follow-ups.<br> • Experience in preparing commercial offers, invoicing, payment follow-ups, and maintaining service-related documentation.<br> • Ability to generate customer leads and create product or service awareness through customer interaction and telemarketing activities.<br> • Strong communication, coordination, and interpersonal skills.<br> • Good analytical and reporting skills with attention to detail.<br> • Familiarity with IT services or technology support environments is preferred.<br> • Ability to conduct customer satisfaction surveys and maintain positive customer relationships.<br></span> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for a Reliability Engineer to join its Singapore business unit, focusing on setting Reliability requirements for components, subsystems, and assemblies.<br> This is a full-time onsite position in Basra, Iraq.</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Telecommunication Engineer (Iraq)<br><br><p>Responsible for the design, specification and services related to communication systems, such as satellite, line of sight, fiber optic, phone, public address systems and the transmission of data from supervisory control and data acquisition system. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 4 years related experience, with average experience ranging from 6-10 years.</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are seeking a highly experienced Senior Mechanical Engineer to join our team for a major 400-bed hospital project in Iraq.</p><p><b>Key Responsibilities:</b></p><ul><li>Manage and supervise all mechanical works throughout the project lifecycle.</li><li>Review and coordinate shop drawings, material submittals, method statements, and technical submissions.</li><li>Lead site execution activities and ensure compliance with project specifications and standards.</li><li>Coordinate with consultants, contractors, subcontractors, and other engineering disciplines.</li><li>Monitor project progress, quality, safety, and schedules.</li><li>Oversee testing, commissioning, snagging, and handover activities.</li><li>Support procurement planning and material delivery schedules.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requirements:</p><ul><li>Bachelor's Degree in Mechanical Engineering.</li><li>Minimum 10 years of relevant experience in large-scale projects.</li><li>Previous experience in hospitals, healthcare facilities, hotels, airports, or complex buildings is highly preferred.</li><li>Strong knowledge of:<ul><li>HVAC Systems</li><li>Chilled Water Systems</li><li>Chillers, AHUs &amp; FCUs</li><li>Ventilation &amp; Smoke Management Systems</li><li>Medical Gas Systems</li><li>Plumbing &amp; Drainage Systems</li><li>Fire Fighting Systems</li><li>Building Management Systems (BMS)</li></ul></li><li>Experience in testing, commissioning, and project handover.</li><li>Strong leadership, coordination, and problem-solving skills.</li></ul><p>Qualified candidates are invited to submit their CVs for consideration.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Planning Engineer-(EPCM)-Onsite<br><br><p><b>Job Description</b></p><br><br><br><p><b>Job Title Planning Engineer</b></p><br><br><p><b>Reports to Project Control Manager</b></p><br><br><p><b>Skillpool Project Services</b></p><br><br><p><b>Company: </b>KBR-Iraq<br><b>Project: </b>EPCM<br><b>Location</b>: Basra, Iraq<br>Rotation: 28/28</p><br><br><p>Required: Local National</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Roles and Responsibilities:</b></p><br><br><br><p><b>The Planning Engineer will report to the Project Control Manager. </b></p><br><br><p><b>Specific responsibilities include:</b></p><br><br><ul><li>Developing and maintaining Project Execution Schedules including Level 1/2/3 schedules using tools like Primavera P6. Ensure alignment on project assumptions with cost engineering, cost estimation, risk management and project management.</li><li>Implement Schedule requirements of Company into the planning and cascade these to the contractors accordingly.</li><li>Coordinate with engineering, procurement, and construction teams to gather inputs for the master schedule.</li><li>Monitor progress and update schedules regularly to reflect actual performance.</li><li>Identifying trends or potential slippages and report on these to the Project Engineers or the Project Services Lead.</li><li>Producing regular reports on progress against schedule. Reporting schedule performance index (SPI)</li><li>Deliver and maintain consistent and realistic plans and control structures for the project. Understand the list of plans required to execute the assigned project sub-elements and their interface to other sub-elements. Develop the activities, durations as per productivity norms, logic, resources and progress for the assigned project sub-elements, leading to the creation of the baseline schedule and its subsequent maintenance.</li><li>Develop, implement and comply with the planning and progress monitoring procedures.</li><li>Conduct the schedule monthly progress update, forecast, critical path and trend analyses for assigned elements, including any impact from interface areas. Implement and maintain the status reports. Provide regular and comprehensive schedule status reports to project engineers.</li><li>Liaise with and challenge Project Engineering personnel to ensure proper understanding of the key schedule sensitivities and drivers.</li><li>Develop contract key dates, milestones and Project Hub plan dates that align with the overall project schedule.</li><li>Participate in evaluating bid schedules and reviewing and assessing contractor plans to support contract award recommendations.</li><li>Develop contract sections for planning and progress monitoring and reporting. Review, verify, assess contractors reported progress and ensure that this is reflected in the project schedule.</li><li>Contribute to the translation of the project’s risk profile into the probabilistic risk model and understand the output, including the key risk drivers for the possible range of schedule completion dates. Track the criticality of the main paths to completion and float consumption.</li><li>Provide input data for and participate in benchmarking activities.</li><li>Contribute to close-out data to enable knowledge retention (lessons learned, project data compilation) at completion of work</li></ul><br><p><b>Education, Skills &amp; Experience:</b></p><br><br><p><b>Education</b></p><br><br><p>Bachelor’s Degree or Diploma in an any discipline</p><br><br><p><b>Experience and Skill set</b></p><br><br><ul><li>Minimum 8 years experience in Oil and Gas Industry in Planning Engineer roles.</li><li>Minimum 5 years experience in Oil and Gas related project delivery related projects</li><li>Ability to work and manage in a multi-cultural environment with good understanding of cost estimation parameters to be considered in Middle East.</li><li>Skill to actively engage with different project disciplines</li><li>Ability to work and manage in a multi-cultural environment</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for an Applications Engineer to join its Singapore business unit focusing on overall delivery of automation, control, and instrumentation scope, ensuring safety, quality, schedule, and cost compliance for a major onshore brownfield project in Basra, Iraq on 28*28 rotation. This is a full-time onsite position in Basra, Iraq, with travel requirement.</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for a Reliability Engineer to join its Singapore business unit, focusing on setting Reliability requirements for components, subsystems, and assemblies.<br> This is a full-time onsite position in Basra, Iraq.</p><br><br> Wood is a global leader in consulting and engineering, helping to unlock solutions to critical challenges in energy and materials markets. We provide consulting, projects and operations solutions in 45 countries, employing around 25,000 people. www.woodplc.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p><strong>Remarkable people, trusted by clients to design and advance the world.</strong></p><br><p>Wood is currently recruiting for a Reliability Engineer to join its Singapore business unit, focusing on setting Reliability requirements for components, subsystems, and assemblies.<br> This is a full-time onsite position in Basra, Iraq.</p><br><p><i><strong>#Wood #Iraq #Basra #Reliability Engineer&nbsp;</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced Reliability Engineer&nbsp;to join our Singapore Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This project is to focus more resources towards improving maintenance and reliability on the Oil, Gas &amp; Water Systems, required to efficiently support maintenance, turn arounds and engineering organizations with the appropriate qualifications and experience.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li></ul><p><strong><u>Responsibilities:</u></strong></p><br><ul> <li>Set Reliability requirements for components, subsystems, and assemblies</li> <li>Establish reliability &amp; work planning metrics/KPI's to monitor performance &amp; improvement PM/CM ratio, MTBF, MTTR, etc</li> <li>Support the IPT's by providing technical support on equipment and reliability issues</li> <li>Conduct in-depth Life Data Analyses</li> <li>Coordinate investigations of equipment related incident/accidents that may occur in the plant</li> <li>Manage Plant E&amp;I compliance programs (PM, predictive analysis)</li> <li>Provide Guidance for acceptance testing and inspections on new and existing equipment – motors, cables, transformers, MCC’s, (pass/fail criteria)</li> <li>Provide NEC design guidance related to industrial plants, hazardous locations, equipment ratings, protection, intrinsic safety</li> <li>Liaise with DRACAS Team and Engineering Team to ensure fielded data is fed back and corrective action is implemented</li> <li>Collaborate with the Process Development Group on new product introductions on the design &amp; sourcing of custom equipment</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Bachelor of Science in Engineering and 5 to 7 years of industry experience in a reliability engineering role .</li> <li>Monitors the status of their reliability maintenance program</li> <li>Facilitate the identification and communication of the root causes of losses in the operation of production, facility and utility processes</li> <li>Third level Engineering qualiification</li> <li>Previous experience in a similar role in a Pharmaceutical environment</li> <li>Analysis of reliability data to identify adverse performance trends and improvement opportunities</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are Hiring Now - 5 positions - Engineers</p><p><span >Electrical Site Engineer</span><br><span >Civil Site Engineer</span><br><span >Architect</span><br><span >Land Surveyor</span><br><span >Mechanical Engineer</span></p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Cost Engineer-Onsite<br><br><p><b>Job Title: </b>Cost Engineer<br><b>Company: </b>KBR-Iraq<br><b>Project: </b>IFMS<br><b>Location</b>: Basra, Iraq<br>Rotation: 28/28</p><br><br><p>Required: Expats</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Roles and Responsibilities:</b></p><br><br><br><p><b>The Cost Engineer will report to the Project Control Manager. </b></p><br><br><p><b>Specific responsibilities include:</b></p><br><br><p>• Full understanding of the commercial aspect of the project contract and the application to the cost management</p><br><br><p>• Understand contract specific cost procedures and carry out all work in accordance with these,</p><br><br><p>• Study and understand all relevant project documents relating to the cost management of allocated project(s)</p><br><br><p>• Work with all relevant projects and discipline personnel to ensure that cost control procedures are followed,</p><br><br><p>• Set Up project/projects within Cost System to agreed format,</p><br><br><p>• Establishing project control budgets based on the client approved Project Control Estimate,</p><br><br><p>• Reviewing cost commitment and expenditure information (for all cost elements), for input to the computerized cost control and reporting system on a weekly basis and ensuring that all information received is accurate and correctly input,</p><br><br><p>• Producing regular cost reports and advising management of any forecast cost overruns as soon as possible to allow corrective actions to be taken in a timely manner. Highlighting areas of concern and suggesting areas of improvement,</p><br><br><p>• Maintaining comprehensive accessible registers of financial approvals, variations and change orders,</p><br><br><p>• Review project man-hours and the allocation of man-hours in conjunction with Planning on a regular basis</p><br><br><p>• Liaising with the Project Management, Finance, Contracts and Procurement departments with regards to establishing monthly evaluation of work done, goods received and services rendered for invoice preparation and verification</p><br><br><p>• Ensure that all cost related work is in compliance with the contract,</p><br><br><p>• Maintain rates within Computerized Cost System, ensuring they are up to date and all rate uplifts are implemented. Advise Project Management of additional costs involved and assist in obtaining additional approval from client,</p><br><br><p>• Check that all estimates meet contract requirements and all relevant cost information is fed back to the estimates,</p><br><br><p>• When Project specific Cost Procedures are in place ensure they have been implemented in full,</p><br><br><p>• Maintain a good working knowledge of relevant corporate cost software,</p><br><br><p>• Ensure that adequate control of commitment is in place,</p><br><br><p>• Supervise and encourage junior and assistant personnel, including checking their work,</p><br><br><p>• Participate in schedule risk analysis as required,</p><br><br><p>• Ensure that the Corporate and Project Specific Change Control procedures are being adhered to</p><br><br><br><p><b>Education, Skills &amp; Experience:</b></p><br><br><br><p><b>Education</b></p><br><br><p>• Bachelor’s Degree in an engineering discipline</p><br><br><br><p><b>Experience and Skill set</b></p><br><br><p>• Minimum 8 years experience in Oil and Gas Industry in Cost Engineering roles.</p><br><br><p>• Minimum 5 years experience in Oil and Gas related project delivery related projects</p><br><br><p>• Minimum 5 years experience in Oil and Gas Project Delivery as a Umbrella Contract Senior Cost Engineer</p><br><br><p>• Ability to work and manage in a multi-cultural environment with good understanding of cost estimation parameters to be considered in Middle East.</p><br><br><p>• Skill to actively engage with different project disciplines</p><br><br><p>• Ability to work and manage in a multi-cultural environment</p><br><br><br><br><br> </div>