وظائف رسام ميكانكي في العراق

<p>The Mechanical &amp; Rotating QC Inspector is responsible for monitoring, supervising, and controlling all Quality Control activities related to mechanical static and rotating equipment within the AGUP2 Project CPF2 Package. He ensures that all contractual, technical, and quality requirements are properly implemented by the Contractor and Subcontractors during Construction, Pre-commissioning, and Commissioning phases. The position reports directly to the CPF2 Site QC Superintendent and works closely with Construction, Commissioning, QC disciplines, Vendors, and Contractor/Subcontractor teams .</p><p><strong>MAIN MISSIONS/RESPONSIBILITIES</strong></p><p><strong>Daily Inspection &amp; Reporting</strong></p><ul><li>Monitor and record all rotating equipment activities on a daily basis.</li><li>Conduct routine inspections in construction areas, equipment installation zones, and pre-commissioning areas.</li><li>Perform specific inspections on rotating machinery and associated installation activities.</li><li>Provide daily update and weekly reporting directly to the CPF2 Site QC Superintendent, covering:</li><ul><li>Inspection progress and key findings</li><li>Non-conformities and recurring defects</li><li>Critical issues requiring escalation or arbitration</li><li>Status of corrective actions</li><li>Quality trends and contractor performance indicators</li></ul><li>Contribute actively to daily/weekly QC coordination meetings and ensure the QC Superintendent receives all relevant data for consolidated site reporting.</li><li>Maintain up-to-date records, ITP follow-up, NCR/CAR tracking, and Mechanical Completion documentation enabling full visibility for the QC Superintendent.</li></ul><p><strong>Rotating Equipment Installation &amp; Inspection</strong></p><ul><li>Inspect rotating equipment such as: Pumps (centrifugal, reciprocating, screw), Compressors (reciprocating, centrifugal), Turbines, Electric motors, Blowers and fans</li><li>Verify foundations, grout, anchor bolts, leveling, and mounting conditions for rotating equipment.</li><li>Check alignment (cold/hot), coupling installation, run-out, and shaft rotation.</li><li>Verify lubrication systems, mechanical seals, and auxiliary systems.</li><li>Review and validate inspection reports, punch lists, and test results (vibration, performance, run-in).</li><li>Ensure compliance with vendor documentation, project specifications, and industry standards.</li></ul><p><strong>Pre-Commissioning &amp; Commissioning</strong></p><ul><li>Witness and verify rotating equipment pre-commissioning activities: Oil flushing, Lubrication system checks, Motor solo-run, Direction of rotation, Alignment verification</li><li>Participate in commissioning tests: Vibration analysis, Performance testing, Functional checks</li><li>Ensure all rotating equipment is ready for handover to Commissioning.</li></ul><p><strong>Documentation &amp; Compliance</strong></p><ul><li>Review and comment on Contractors' and Suppliers' ITPs, Method Statements, and procedures.</li><li>Ensure proper implementation of approved drawings, QC plans, surveillance plans, and ITPs.</li><li>Verify vendor documentation, equipment certification files, and material certificates.</li><li>Issue Quality Records, NCRs, and CARs when required.</li><li>Ensure proper traceability of inspections, tests, and mechanical completion documentation.</li></ul><p><strong>Welding, NDT &amp; Interfaces (Only where rotating equipment interfaces with piping or structural supports)</strong></p><ul><li>Coordinate with QC Welding, NDT, Piping, and Structural teams for interface inspections.</li><li>Verify NDT results related to rotating equipment supports, baseplates, and connected piping.</li><li>Ensure correct implementation of flange alignment and piping connection tolerances.</li></ul><p><strong>Non-Conformities &amp; Corrective Actions</strong></p><ul><li>Identify and report non-conformities or deviations in a timely manner.</li><li>Ensure corrective actions are implemented and verified.</li><li>Immediately escalate critical anomalies to the QC Superintendent.</li></ul><p><strong>Coordination &amp; Interface</strong></p><ul><li>Participate in daily/weekly construction and QC coordination meetings.</li><li>Interface with Construction, Commissioning, Engineering, Vendors, and Contractor QC teams.</li><li>Support technical clarifications and design queries with Engineering when required.</li><li>Participate in audits (Construction, HSE, QC) and site visits.</li><li>Ensure confidentiality of all documentation under responsibility.</li></ul><p><strong>Scope of Work</strong></p><p><strong>Rotating Equipment</strong></p><p>The Mechanical &amp; Rotating QC Inspector covers the following equipment categories:</p><ul><li><strong>Rotating Equipment</strong><ul><li>Centrifugal pumps</li><li>Reciprocating pumps</li><li>Screw pumps</li><li>Centrifugal compressors</li><li>Reciprocating compressors</li><li>Gas/steam turbines</li><li>Electric motors</li><li>Blowers and fans</li><li>Mechanical packages containing rotating components</li></ul></li><li><strong>Associated Systems</strong><ul><li>Alignment systems (laser, dial indicator)</li><li>Lubrication systems</li><li>Mechanical seals</li><li>Couplings</li><li>Vibration monitoring systems</li><li>Auxiliary systems (cooling, sealing, lubrication)</li></ul></li></ul><p><strong>Desired Candidate Profile</strong></p><p>Professional Experience Minimum 10 years of experience in Mechanical &amp; Rotating QC on major Oil &amp; Gas EPC projects. Strong experience with rotating equipment installation, alignment, and commissioning. Experience on CPF, refinery, or large industrial facilities is strongly preferred. Demonstrated ability in resource planning, decision-making, and team coordination.</p><p>Technical Competencies Solid knowledge of rotating equipment ( pumps, compressors, turbines, motors, fans ). Strong understanding of mechanical installation requirements ( alignment, foundations, couplings ). Ability to interpret standards, codes, specifications, and technical drawings. Proficiency with measuring instruments ( micrometers, calipers, dial indicators, laser alignment tools ). Knowledge of vibration analysis and performance testing. Understanding of NCR, deviation, and concession processes. Familiarity with digital QC systems ( Aconex, SharePoint, SmartPlant, or equivalent ) is a plus.</p><p>Behavioral Competencies Exemplary behavior regarding Company Code of Conduct and HSSE rules. Ensure that all HSSE training are completed and HSE rules implemented within his area of responsibility. Ability to represent the Company in discussions and meetings with Vendors, Contractors, and Subcontractors. High attention to detail and strong reporting discipline. Ability to work autonomously in a harsh, remote site environment. Leadership, team spirit, and resilience under pressure. Ability to transfer knowledge to team members. Fluent English (mandatory).</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Engineering professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As an Engineer you are responsible to assist the Chief Engineer / Director of Engineering on all matters related to the repairs and maintenance operation of the physical plant and engineering facilities within the hotel. The role involves maintaining all mechanical, electrical and electronic equipment, including heating and ventilation and will include key responsibilities such as:<br><br>• Organize and set up preventive maintenance programmes for all electrical and mechanical equipment, including general building works<br>• Supervise maintenance employees and contractors who are carrying out minor building work, electrical and mechanical installations<br>• Write specifications for all electrical, mechanical and associated building works, complying with the local government regulations<br>• Decide and agree with the Chief Engineer / Director of Engineering on the priorities of all electrical and mechanical projects<br>• Advise and inform the Chief Engineer / Director of Engineering on any health and safety matters relating to the electricity and work regulations<br>• Liaise with the local government authorities when necessary<br>• Oversee the general maintenance of all life safety systems throughout the hotel and report any major defects to the Chief Engineer / Director of Engineering</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Supervise all Mechanical &amp; Piping commissioning activities within assigned systems.</p><p>Coordinate Mechanical Completion (MC), Pre-Commissioning, Commissioning, and Start-up activities.</p><p>Ensure work is executed in accordance with approved commissioning procedures and project schedules.</p><p>Verify system readiness prior to energization and start-up.</p><p>Supervise flushing, hydrotesting, pneumatic testing, leak testing, drying, reinstatement, and preservation activities.</p><p>Coordinate closely with Construction, Process, Electrical, Instrumentation, Operations, and HSE teams.</p><p>Participate in system walkdowns, punch list clearance, and Mechanical Completion inspections.</p><p>Review and approve commissioning documentation, check sheets, and test records.</p><p>Monitor contractor performance and ensure compliance with project quality and HSE requirements.</p><p>Support integrated commissioning, performance testing, and plant start-up.</p><p>Prepare daily commissioning reports and communicate progress, issues, and risks to the Commissioning Lead.</p><p>Schedule: (6) Days/Week, (8) hours/Day.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's Degree in Mechanical Engineering or a related discipline.</p><p>Minimum 10 years of oil &amp; gas industry experience.</p><p>Minimum 5 years of Mechanical &amp; Piping Commissioning experience on EPC projects.</p><p>Proven experience in commissioning process facilities, gas plants, central processing facilities (CPF), refineries, or similar installations.</p><p>Familiarity with international standards including API, ASME, ISO, and relevant commissioning practices.</p><p>Excellent communication, coordination, and leadership skills.</p><p>Experience working in Iraq.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operation and Maintenance Technicians for Datacenters (Power, Generators and cooling systems).</p> <p> Daily task Operation and Maintenance follow-up.</p> <p> Daily reporting. </p> <p> Support and participate on Datacenters in-house task implementations.</p> <p> Mechanical /Electrical Prep industry /technology institute. </p> <p> 4-year experiences in field.</p> <p> Technical knowledge (Power, Generators and cooling).</p> <p> Mechanical /Electrical regular &amp; preventive procedures.</p> <p> </p> <p> <strong>Behavioral Competencies:</strong> </p> <p> <br> </p> <p> Delivering Results &amp; Fostering Ownership.</p> <p> Building Customer Value.</p> <p> <br> </p> <p> <strong>Technical Competencies:</strong> </p> <p> <br> </p> <p> Data Center Operation &amp; Maintenance.</p> <p> Network Monitoring.</p> <p> Technical Writing and Reporting.</p> <p> Problem Solving.</p> <p> Technical Writing and Reporting.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Construction Supervisor -Mechanical &amp; Piping-Onsite<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Construction Supervisor -Mechanical &amp; Piping<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Local National</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b><u>Roles and Responsibilities:</u></b></p><br><br><br><p>Specific responsibilities of the Construction Supervisor include:</p><br><br><p>Overall view of the role:</p><br><br><br><ul><li>Contributes to Construction Safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li><li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li><li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li><li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li><li>Coordinate with engineering, QA/QC, and HSE teams to ensure compliance.</li><li>Working with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li><li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li><li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&amp;ID).</li><li>Experience in reading and understanding LOSH, Test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li><li>Coordinate with the Contractor/Subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, Installation, Reinstatement, and Final completion of the subsystem, both Brownfield and Greenfield projects.</li><li>Experience in rotating equipment construction activities. Including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li><li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and enough experience for the piping quality requirements (NDT, PWHT, Etc.).</li><li>Having strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li></ul><br><p><b><u>Accountabilities/Expectations:</u></b></p><br><br><br><ul><li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li><li>Ensure that the project planning is deliverable from Engineering and that Contracts &amp; Procurement aligns with the construction and handover sequences.</li><li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li><li>Ensure to follow the final/approved design during construction.</li><li>Good knowledge of international standards (ASME, API, etc.)</li><li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li></ul><br><p><b><u>Education, Skills &amp; Experience:</u></b></p><br><br><ul><li>BSc., University degree in mechanical.</li></ul><br><p><b><u>Experience and Skillset</u></b></p><br><br><ul><li>Minimum 10-12 years’ Construction experience in Oil and Gas-related projects with strong proof for piping and rotating roles.</li><li>Strong leadership and teambuilding skills; supervisory experience.</li><li>Experience in Static and rotating equipment installation and Alignment.</li><li>Strong software skills, Microsoft Office, document websites, 3D module review, and prefer to have good knowledge of software design (AutoCAD).</li><li>Strong level in English language to communicate properly with the team members and all stakeholders.</li></ul><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site M&amp;P Construction Lead (Infrastructure)<br><br><p><b>Job Description</b>: Construction M&amp;P Lead</p><br><br><p><b>Company</b>: KBR Iraq</p><br><br><p><b>Location</b>: Iraq (28/28 Rotation)</p><br><br><p><b>Nationality:</b> Any</p><br><br><br><p>The Lead Mechanical &amp; Piping Construction Lead is responsible for directing, coordinating, and technically governing all field construction activities across mechanical and piping scopes within brownfield and greenfield project environments. The role provides senior level leadership, ensures disciplined execution, drives constructability integration, and supports strategic planning across multi‑phase construction programs.</p><br><br><br><p>This position acts as the primary technical Lead for mechanical and piping construction, ensuring HSSE compliance, schedule adherence, cost efficiency, and quality compliance. The Lead manages multi‑discipline interfaces and ensures seamless integration between engineering, procurement, construction, and commissioning teams.</p><br><br><br><p><b>Accountabilities / Expectations</b></p><br><br><ul><li>Lead all mechanical and piping construction activities across multiple simultaneous work fronts, ensuring safe, efficient, and compliant execution.</li><li>Provide technical direction, coaching, and performance oversight to construction teams and contractors.</li><li>Manage daily/weekly construction planning, work‑front readiness, and resource allocation.</li><li>Ensure coordinated execution across civil, structural, electrical, instrumentation, and commissioning disciplines.</li><li>Ensure mechanical and piping designs fully incorporate constructability principles, modularization, cold‑work strategies, and HSSE risk reduction.</li><li>Lead Constructability Reviews and provide authoritative input on installation methodologies, lifting studies, access planning, and brownfield tie‑in strategies.</li><li>Validate engineering deliverables for completeness, accuracy, and alignment with construction sequencing and systemization.</li><li>Review and approve construction method statements, ITPs, JHAs, and technical procedures.</li><li>Support development and implementation of construction execution plans, resource strategies, and work‑front sequencing for all project phases.</li><li>Ensure construction activities align with Level 4 schedules, procurement milestones, fabrication readiness, and commissioning priorities.</li><li>Identify productivity constraints, evaluate root causes, and implement corrective actions to improve field performance.</li><li>Drive initiatives such as off‑plot fabrication, pre‑assembly, modular construction, and standardized installation practices.</li><li>HSSE leadership by enforcing safe systems of work and ensuring compliance with KBR and client HSSE standards.</li><li>Ensure mechanical and piping installations meet project specifications, industry codes (ASME, API, ISO), and quality requirements.</li><li>Oversee inspection, testing, and commissioning readiness including hydrotesting, flushing, leak testing, and mechanical completion.</li><li>Maintain strong communication with Construction Manager, Engineering Lead, Procurement, QA/QC, and Commissioning teams.</li><li>Ensure timely resolution of technical queries, field design changes, and construction issues through structured interface management.</li><li>Provide accurate reporting on progress, productivity, risks, and construction performance.</li><li>Identify construction risks early, develop mitigation plans, and ensure proactive management of brownfield and greenfield constraints and SIMOPS.</li><li>Promote continuous improvement through lessons learned, innovation in field execution, and adoption of best‑practice methodologies.</li></ul><br><p><b>Education</b></p><br><br><p>BSc. Degree in Mechanical Engineering, Piping Engineering, or related discipline.</p><br><br><br><p><b>Experience Requirements</b></p><br><br><p>10 + years experience in Oil &amp; Gas mechanical/piping engineering and design.</p><br><br><p>5- 10 years experience leading construction activities in multidiscipline environments, including brownfield and live‑plant conditions.</p><br><br><br><p>Demonstrated experience in:</p><br><br><ul><li>Productivity measurement and resource‑based planning</li><li>Level 4 construction scheduling</li><li>Mechanical completion, systemization, and commissioning interfaces</li><li>Managing multiple contractors and simultaneous work fronts</li><li>Technical &amp; Leadership Skills</li><li>Strong leadership and communication capabilities.</li><li>Advanced understanding of constructability, modularization, and field execution methodologies.</li><li>Proficiency in interpreting engineering drawings, isometrics, P&amp;IDs, and 3D model reviews.</li><li>Ability to lead complex brownfield and greenfield tie‑ins, shutdown scopes, and SIMOPS environments.</li><li>Strong problem solving skills with the ability to make technical decisions under pressure.</li><li>High competency in HSSE risk management and safe construction practices.</li></ul><br><br><br><br> </div>

<p>We are seeking an experienced Mechanical Engineer to lead the complete MEP works for a prestigious 5-Star Hotel Project in Iraq.</p><p>The successful candidate will be responsible for managing the Mechanical, Electrical, Plumbing, Fire Fighting, ELV, and BMS works from design coordination through procurement, construction, testing &amp; commissioning, and final handover while ensuring the highest standards of quality, safety, and schedule performance. Previous experience delivering luxury hospitality projects is highly preferred.</p><p><b>Key Responsibilities</b></p><ul><li>Lead and manage all MEP activities throughout the project lifecycle.</li><li>Coordinate Mechanical, Electrical, Plumbing, Fire Fighting, ELV, and BMS works.</li><li>Coordinate with architects, structural engineers, interior designers, consultants, and subcontractors.</li><li>Review and approve shop drawings, material submittals, method statements, and technical documentation.</li><li>Monitor project progress, quality, cost, and schedule to ensure successful project delivery.</li><li>Lead procurement planning and coordinate material approvals.</li><li>Manage testing, commissioning, system integration, and project handover.</li><li>Ensure compliance with project specifications, hotel brand standards, local regulations, and HSE requirements.</li><li>Resolve technical and construction challenges proactively.</li><li>Prepare progress reports and attend coordination meetings with the Client and Consultant.</li></ul><p>What We Offer</p><ul><li>Opportunity to lead a landmark hospitality project.</li><li>Professional and collaborative working environment.</li><li>Competitive salary package based on qualifications and experience.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's Degree in Mechanical Engineering.</p><p>Minimum 12 years of experience in MEP construction projects.</p><p>Minimum 5 years in a Project Manager or Senior MEP Management role.</p><p>Proven experience delivering at least one 5-Star Hotel Project from construction through testing &amp; commissioning and handover.</p><p>Strong knowledge of HVAC (Chilled Water Systems), Plumbing, Fire Fighting, ELV, BMS, and coordination of Electrical systems.</p><p>Proficiency in Primavera P6, Microsoft Project, AutoCAD, and Microsoft Office.</p><p>PMP certification is an advantage.</p><p>Excellent leadership, communication, and coordination skills.</p><p>Excellent command of English.</p>

<p><h4>KBR Sustainable Technology Solutions (STS)</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Responsibilities:</h4> <ul> <li>Day to day delivery of mechanical engineering support for site operations.</li> <li>Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.</li> <li>Collaborates with central engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.</li> <li>Promotes a culture of open safety reporting and continuous improvement.</li> <li>Provides immediate front line support for operations and maintenance teams to resolve minor issues and escalate more significant issues to the central engineering team.</li> <li>Ensures asset mechanical engineering risks (both static and rotating) are understood, controlled, managed and reduced.</li> <li>Participates in a variety of asset and project risk assessments.</li> <li>Input into anomaly assessment and resolution plans.</li> <li>Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all safe operating limit excursions.</li> <li>Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.</li> <li>Provides mechanical support to technical management of change (MoCs) and engineering queries.</li> <li>Acts as technical interface with projects and modifications organisation, including development of statement of requirements (SOR), project initiation requests (PIRs), and decision support packages (DSP).</li> <li>Supports delivery of production efficiency improvement and defect elimination processes (including simple investigations for deferrals and vulnerabilities).</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity (IPC).</li> <li>Performs follow-up actions and observations from self-verification checks that are related to mechanical engineering.</li> <li>Participates in start up readiness and assurance reviews.</li> <li>Provides coaching to junior engineers.</li> </ul> <h4>Experience, Qualifications & Key Skills</h4> <ul> <li>Above 10 years experience in oil and gas industry (preferably with international oil companies direct or contract).</li> <li>Professional (chartered) engineer preferred.</li> <li>Technical degree in mechanical engineering or allied engineering subject.</li> <li>Experience in previous asset engineering or operations support engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – office suite, document management, applications for computerized maintenance management systems (CMMS) and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behavior change management.</li> </ul> <h4>Preferred Qualifications:</h4> <p>Certified professional engineer.</p> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: HVAC mechanical lead – oil & gas / power projects</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Location:</strong> Majnoon Oil Field, Iraq (Rotation Alignment 28/28)<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The HVAC Mechanical Lead is responsible for overseeing all heating, ventilation, and air-conditioning systems across Majnoon Oil Field Projects. This role ensures safe, reliable, and compliant operation of HVAC assets in line with KBR standards, client specifications, and Iraq oil & gas regulatory requirements. The position leads a team of HVAC technicians, coordinates maintenance activities, and supports project execution for upgrades, shutdowns, and new installations.</p> <h4>Accountability / expectations</h4> <ul> <li>Lead and supervise HVAC teams, ensuring daily tasks are executed safely and efficiently.</li> <li>Manage preventive, corrective, and predictive maintenance programs for all HVAC systems, including chillers, package units, split units, ventilation systems, and industrial cooling equipment.</li> <li>Conduct technical troubleshooting, root-cause analysis, and performance diagnostics on mechanical and electrical HVAC components.</li> <li>Ensure compliance with KBR HSSE policies, client standards, and international codes.</li> <li>Review and approve HVAC work permits, job hazard analyses, and method statements.</li> <li>Coordinate with Operations, Electrical, Instrumentation, and Projects teams to support field activities and shutdown planning.</li> <li>Oversee contractor performance, ensuring quality workmanship and adherence to specifications.</li> <li>Maintain accurate documentation: maintenance logs, equipment history, spare-parts records, and inspection reports.</li> <li>Support project engineering teams with HVAC design reviews, material requisitions, and technical evaluations.</li> <li>Monitor inventory levels and ensure availability of critical spares and consumables.</li> <li>Train and mentor HVAC technicians, promoting competency development and safe work practices.</li> <li>Participate in incident investigations and implement corrective actions to prevent recurrence.</li> <li>Ensure HVAC systems operate efficiently to support critical facilities such as control rooms, substations, accommodation units, and workshops.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in mechanical engineering or HVAC technology.</p> <h4>Experience</h4> <ul> <li>10+ years of HVAC experience in oil & gas, petrochemical, or heavy industrial environments.</li> <li>Strong knowledge of HVAC mechanical systems, refrigeration cycles, ducting, ventilation, and industrial cooling.</li> <li>Experience supervising multi-disciplinary maintenance teams.</li> <li>Proven understanding of HSSE requirements in hazardous environments.</li> <li>Ability to interpret engineering drawings, P&IDs, and technical specifications.</li> <li>Strong communication and leadership skills.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Job title:</strong> Construction supervisor - mechanical & piping</p> <p><strong>Company:</strong> KBR</p> <p><strong>Location:</strong> Basra Iraq</p> <p><strong>Employment type:</strong> Full-time, contract</p> <p><strong>Rotation:</strong> 28/28</p> <p><strong>Required nationals:</strong> Local national</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>Specific responsibilities of the construction supervisor include:</p> <p><strong>Overall view of the role:</strong></p> <ul> <li>Contributes to construction safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li> <li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li> <li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li> <li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li> <li>Coordinates with engineering, QA/QC, and HSE teams to ensure compliance.</li> <li>Works with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li> <li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li> <li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&ID).</li> <li>Experience in reading and understanding LOSH, test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li> <li>Coordinates with the contractor/subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, installation, reinstatement, and final completion of the subsystem, both brownfield and greenfield projects.</li> <li>Experience in rotating equipment construction activities including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li> <li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and sufficient experience for the piping quality requirements (NDT, PWHT, etc.).</li> <li>Strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li> </ul> <h4>Accountabilities/expectations</h4> <ul> <li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li> <li>Ensure that the project planning is deliverable from engineering and that contracts & procurement aligns with the construction and handover sequences.</li> <li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li> <li>Ensure to follow the final/approved design during construction.</li> <li>Good knowledge of international standards (ASME, API, etc.).</li> <li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li> </ul> <h4>Education, skills & experience</h4> <p>BSc., university degree in mechanical engineering.</p> <p><strong>Experience and skillset:</strong></p> <ul> <li>Minimum 10-12 years’ construction experience in oil and gas-related projects with strong proof for piping and rotating roles.</li> <li>Strong leadership and teambuilding skills; supervisory experience.</li> <li>Experience in static and rotating equipment installation and alignment.</li> <li>Strong software skills including Microsoft Office, document websites, 3D module review, and preferably good knowledge of software design (AutoCAD).</li> <li>Strong level in English language to communicate properly with the team members and all stakeholders.</li> </ul></p><p></p>

<ul><li><strong>Job Title:</strong> Mechanical Engineer</li><li><strong>Location:</strong> Iraq</li><li><strong>Company:</strong> Iraqi National Food Industries Group</li><li>Job Summary</li><li>We are seeking a qualified Mechanical Engineer to join our team. The successful candidate will be responsible for the operation, maintenance, troubleshooting, and continuous improvement of production machinery and equipment within our manufacturing facilities.</li></ul><p>&nbsp;</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Construction HVAC Mechanical Lead<br><br><p>"Belong, Connect, Grow, with KBR!</p><br><br><br><p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p><br><br><p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</p><br><br><br><br><p><b>Job Description:</b>&nbsp;HVAC Mechanical Lead – Oil &amp; Gas / Power Projects</p><br><br><p><b>Company:&nbsp;</b>KBR Iraq</p><br><br><p><b>Location:</b>&nbsp;Majnoon Oil Field, Iraq (Rotation Alignment 28/28)</p><br><br><p><b>Nationality:</b>&nbsp;Iraqi Nationals Preferred</p><br><br><br><p>The HVAC Mechanical Lead is responsible for overseeing all heating, ventilation, and air‑conditioning systems across Majnoon Oil Field Projects. This role ensures safe, reliable, and compliant operation of HVAC assets in line with KBR standards, client specifications, and Iraq oil &amp; gas regulatory requirements. The position leads a team of HVAC technicians, coordinates maintenance activities, and supports project execution for upgrades, shutdowns, and new installations.</p><br><br><br><p><b>Accountability / Expectation</b>s</p><br><br><ul><li>Lead and supervise HVAC teams, ensuring daily tasks are executed safely and efficiently.</li><li>Manage preventive, corrective, and predictive maintenance programs for all HVAC systems, including chillers, package units, split units, ventilation systems, and industrial cooling equipment.</li><li>Conduct technical troubleshooting, root‑cause analysis, and performance diagnostics on mechanical and electrical HVAC components.</li><li>Ensure compliance with KBR HSSE policies, client standards, and international codes</li><li>Review and approve HVAC work permits, job hazard analyses, and method statements.</li><li>Coordinate with Operations, Electrical, Instrumentation, and Projects teams to support field activities and shutdown planning.</li><li>Oversee contractor performance, ensuring quality workmanship and adherence to specifications.</li><li>Maintain accurate documentation: maintenance logs, equipment history, spare‑parts records, and inspection reports.</li><li>Support project engineering teams with HVAC design reviews, material requisitions, and technical evaluations.</li><li>Monitor inventory levels and ensure availability of critical spares and consumables.</li><li>Train and mentor HVAC technicians, promoting competency development and safe work practices.</li><li>Participate in incident investigations and implement corrective actions to prevent recurrence.</li><li>Ensure HVAC systems operate efficiently to support critical facilities such as control rooms, substations, accommodation units, and workshops.</li></ul><br><p><b>Education</b></p><br><br><p>Bachelor’s Degree or Diploma in Mechanical Engineering or HVAC Technology.</p><br><br><br><p><b>Experience</b>&nbsp;</p><br><br><p>10+ years of HVAC experience in oil &amp; gas, petrochemical, or heavy industrial environments.</p><br><br><br><ul><li>Strong knowledge of HVAC mechanical systems, refrigeration cycles, ducting, ventilation, and industrial cooling.</li><li>Experience supervising multi‑disciplinary maintenance teams.</li><li>Proven understanding of HSSE requirements in hazardous environments.</li><li>Ability to interpret engineering drawings, P&amp;IDs, and technical specifications.</li><li>Strong communication and leadership skills.</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Construction Supervisor-Flowlines<br><br><p><b>Job Description</b></p><br><br><br><p><b>Job Title: Construction Supervisor-Flowlines</b></p><br><br><p><b>Company: KBR</b></p><br><br><p><b>Location: Basra</b>, Iraq</p><br><br><p><b>Nationality: Local</b> Nationals</p><br><br><p><b>Department: Construction</b> / Projects</p><br><br><p><b>Reports To: </b>Construction Manager</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><p><b>Job Purpose</b></p><br><br><p>The Construction Supervisor is responsible for overseeing and managing all on-site construction activities, ensuring that projects are executed safely, on schedule, within budget, and in compliance with project specifications, quality standards, and HSE regulations. The role involves supervising construction teams, subcontractors, and day-to-day site operations with a primary focus on flowlines, mechanical works, and piping systems in the oil and gas sector.</p><br><br><br><p><b>HSE activities:</b></p><br><br><p>• Support and enforce project guidelines and HSE objectives.</p><br><br><p>• Attend HSE meetings and training when necessary.</p><br><br><p>• Participate in Job Safety Analysis, make suggestions, stop dangerous situations, and report</p><br><br><p>anomalies and dangerous acts</p><br><br><br><p><b>Key Job Responsibilities</b></p><br><br><ul><li>Supervise and coordinate all on-site construction activities related to&nbsp;<b>flowlines, mechanical installations, material and piping systems</b>.</li><li>Ensure work is carried out in strict compliance with&nbsp;<b>project specifications, engineering drawings, and applicable codes/standards</b>.</li><li>Monitor daily work progress and report to the Construction Manager on project status, delays, and resource requirements.</li><li>Manage and supervise construction crews, subcontractors, and vendors to ensure efficient and quality workmanship.</li><li>Review and interpret&nbsp;<b>P&amp;IDs, isometric drawings, piping layouts, and mechanical installation drawings</b>.</li><li>Coordinate with&nbsp;<b>engineering, procurement, and quality control teams</b>&nbsp;to resolve technical issues and ensure material availability.</li><li>Conduct&nbsp;<b>quality inspections</b>&nbsp;on welding, piping fabrication, pressure testing, and mechanical installations.</li><li>Ensure proper&nbsp;<b>documentation and reporting</b>&nbsp;of site activities, including daily reports, inspection records, and progress photos.</li><li>Identify potential risks and implement corrective actions to prevent project delays or safety incidents.</li><li>Participate in&nbsp;<b>site walk-downs, pre-commissioning, and commissioning activities</b>&nbsp;as required.</li><li>Maintain effective communication with clients, contractors, and project stakeholders.</li></ul><br><p><b>Experience:</b></p><br><br><p>Bachelor’s degree in engineering or construction field. Minimum 5 years of experience in the oil industry and a deep understanding of regulations. Experienced Pipeline Construction Supervisor in onshore Greenfield and brownfield project with a very good knowledge of rules, procedures and International Codes and Standards. Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.</p><br><br><p>Proficiency in pipeline systems and software.</p><br><br><p><b>Technical Skills</b></p><br><br><ul><li>In-depth knowledge of&nbsp;<b>piping systems, flowlines, and mechanical installations</b></li><li>Proficiency in reading and interpreting&nbsp;<b>P&amp;IDs, isometric drawings, piping layouts, and structural drawings</b></li><li>Strong understanding of&nbsp;<b>welding procedures, NDT (Non-Destructive Testing), and piping codes</b>&nbsp;(ASME, API, ANSI)</li><li>Familiarity with&nbsp;<b>pressure testing, hydrotesting, and pre-commissioning activities</b></li><li>Working knowledge of&nbsp;<b>project management and construction planning tools</b>&nbsp;(MS Project, Primavera – preferred)</li><li>Competence in&nbsp;<b>quality control and inspection processes</b></li><li>Understanding of&nbsp;<b>HSE management systems</b>&nbsp;and&nbsp;<b>risk assessment methodologies</b></li><li>Proficient in&nbsp;<b>Microsoft Office Suite</b>&nbsp;(Word, Excel, Outlook, PowerPoint)</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li>Strong&nbsp;<b>leadership and team management</b>&nbsp;abilities</li><li>Excellent&nbsp;<b>communication and interpersonal skills</b>&nbsp;for coordination with multicultural teams</li><li>Strong&nbsp;<b>problem-solving and decision-making</b>&nbsp;capabilities</li><li>High level of&nbsp;<b>attention to detail and organizational skills</b></li><li>Ability to work under pressure and meet tight deadlines</li><li><b>Collaborative mindset</b>&nbsp;with the ability to work across departments</li><li><b>Adaptability</b>&nbsp;to changing site conditions and project requirements</li><li>Fluency in&nbsp;<b>Arabic and English</b>&nbsp;(verbal and written)</li></ul><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operation and Maintenance Technicians for Datacenters (Power, Generators and cooling systems).</p> <ul> <li> Daily task Operation and Maintenance follow-up.</li> <li> Daily reporting. </li> <li>Support and participate on Datacenters in-house task implementations</li> </ul> <p> Mechanical /Electrical Prep industry /technology institute. </p> <p> 4-year experiences in field.</p> <p> Technical knowledge (Power, Generators and cooling).</p> <p> Mechanical /Electrical regular &amp; preventive procedures.</p> <p> </p> <p> <strong>Behavioral Competencies:</strong> </p> <p> Delivering Results &amp; Fostering Ownership.</p> <p> Building Customer Value.</p> <p> <br> </p> <p> <strong>Technical Competencies:</strong> </p> <p> Data Center Operation &amp; Maintenance.</p> <p> Network Monitoring.</p> <p> Technical Writing and Reporting.</p> <p> Problem Solving.</p> <p> Technical Writing and Reporting.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>To monitor and maintain quality standards across automotive service and body shop operations by conducting systematic inspections, validating repair quality, and ensuring all completed work complies with dealership procedures and manufacturer specifications.<br> The role aims to minimize repeat repairs, improve customer satisfaction, and support operational excellence through effective quality control practices and coordination with workshop teams.<br> Conduct final quality inspections on vehicles following mechanical repairs, diagnostics, body repairs, paint work, polishing, detailing, and accessory installations.<br> Verify that all completed repairs and services align with job card requirements, manufacturer procedures, and dealership quality standards.<br> Detect workmanship issues, missing repair items, cosmetic defects, or operational concerns and report them for corrective action.<br> Coordinate closely with Technicians, Diagnostic Technicians, Bodyshop Staff, Supervisors, and Service Advisors to resolve identified quality issues.<br> Perform road tests or functional checks when required to validate repair effectiveness and vehicle performance.<br> Ensure that all safety-related repairs and systems are properly completed and functioning before vehicle delivery.<br> Monitor workshop processes and identify recurring quality issues to support continuous improvement initiatives.<br> Maintain inspection reports, quality checklists, and documentation records accurately within company systems.<br> Support warranty compliance by ensuring repairs and replaced parts meet manufacturer warranty conditions and technical standards.<br> Assist in implementing quality assurance procedures, operational standards, and workshop best practices.<br> Ensure vehicles are clean, properly assembled, and ready for customer handover after repair completion.<br> Participate in internal audits, workshop evaluations, and process improvement activities related to service quality.<br> Follow all workplace health, safety, and environmental regulations during inspection and operational activities.<br> Stay updated on manufacturer technical bulletins, repair methods, and quality control procedures.<br> Educational Level / Required Certificates: Diploma or Bachelor’s degree in Mechanical Engineering, Automotive Engineering, Mechatronics, or a related technical field.<br> Automotive quality inspection or OEM certification is considered an advantage.<br> Experience: Minimum 2–4 years of experience in automotive workshops, dealerships, service centers, or bodyshop operations.<br> Strong understanding of vehicle repair procedures, diagnostics, and automotive quality standards.<br> Experience in inspecting mechanical, electrical, and cosmetic repair work.<br> Familiarity with dealership operations and manufacturer service requirements.<br> Ability to identify technical defects and evaluate repair quality effectively.<br> Experience using workshop management systems and inspection documentation.<br> Knowledge of safety standards and warranty procedures within automotive environments.<br> Previous experience in premium automotive brands or OEM-authorized workshops is preferred.<br></span> </div>

<p><b>Role: Quantity Surveying</b></p><p>Industry Type: Engineering &amp; Construction</p><p>Department: Construction &amp; Site Engineering</p><p>Employment Type: Full Time, Permanent</p><p>Role Category: Surveying</p><p>Education</p><p>UG: B.Tech / B.E. in Mechanical Engineering</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Strong expertise in quantity take-off and construction measurement.</li><li>Ability to interpret IFC drawings, P&amp;IDs, Isometrics, Layouts, SLDs, MTOs, and technical specifications.</li><li>Sound knowledge of Civil, Structural, Mechanical, Piping, Electrical, and Instrumentation works.</li><li>Experience with Lump Sum, Remeasurement, Unit Rate, and Provisional Sum contracts.</li><li>Strong understanding of BOQ preparation, reconciliation, progress measurement, and certification.</li><li>Experience in evaluating variations, claims, and change management.</li><li>Excellent knowledge of MS Excel; ERP, Cost Control, and Document Control system experience is an advantage.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration How to apply Project Context and Scope Building on ongoing efforts to strengthen migration governance and promote informed migration choices in Iraq, the project seeks to support the integration of structured migration education modules into selected universities and vocational institutions in coordination with relevant education authorities. This intervention contributes to broader national efforts aimed at promoting safe, orderly, and regular migration, while addressing the risks associated with irregular migration through evidence-based education and awareness initiatives.Under this activity, IOM Iraq will support the development and integration of migration-related educational content within higher education and vocational training systems. The intervention aims to enhance institutional capacities to provide students and young people with balanced, practical, and rights-based knowledge on migration, including regular migration pathways, labour mobility, migrant rights and obligations, risks associated with irregular migration, and sustainable reintegration considerations.Under the overall supervision of head of Mobility Pathways and Inclusion (MPI) and direct supervision of Migration Management National officer, the international Consultant will be responsible to provide technical support for curriculum module development, stakeholder coordination, institutional engagement, and capacity-building activities with relevant ministries, universities, vocational institutions, and other key stakeholders. The assignment will contribute to strengthening long-term national capacities for migration education and support the mainstreaming of migration governance considerations into educational and vocational frameworks in Iraq**.** This opportunity is open to international consultants only. The position is home-based in Iraq, with frequent travel to Baghdad Organizational Department / Unit to which the Consultant is contributing Mobility Pathways and Inclusion (MPI), Migration Governance and Labour Migration Unit Responsibilities Tasks to be performed under this contract • Deliverable 1 Inception Report and Curriculum Module Framework • Timeline: 31 of July • Performance Indicators: • Submission of an Inception Report outlining the proposed methodology, workplan, coordination arrangements, and implementation timeline.. • Submission of a Curriculum Module Framework defining proposed modules, learning outcomes, assessment criteria, and delivery methodologies. Deliverable 2 Draft Curriculum Module Content and Facilitator Guides Timeline: 31 of Aug Performance Indicators: • Development of draft migration education curriculum modules tailored to the Iraqi context. • Integration of migration governance, labour rights, ethical recruitment, regular migration pathways, and referral mechanisms into the curriculum content. • Submission of draft Facilitator Guides, including methodologies, exercises, and indicative delivery timelines. Deliverable 3 Validation Workshop and Revised Draft Curriculum Package Timeline: 30 of Sep Performance Indicators: • Presentation of the draft curriculum package to IOM for technical review and validation. • Submission of a revised draft curriculum package reflecting stakeholder inputs and technical feedback. Deliverable 4 Final Curriculum Package Timeline: 31 October 2026 Performance Indicators: • Submission of a finalized and implementation-ready curriculum moduel package in English. • Submission of final curriculum module materials, including curriculum manual, participant workbook/handouts, and finalized facilitator guides. Performance indicators for the evaluation of results • . Inception Report and 1 detailed workplan submitted and approved by IOM within the agreed timeline. • Curriculum Module Framework developed in coordination with IOM and relevant stakeholders. • Draft one migration education modules and one facilitator guides developed in line with agreed thematic areas and learning objectives. • One validation sessions/workshops conducted with relevant stakeholders and IOM staff presence , and feedback incorporated into revised drafts. • Final curriculum package submitted in English . Qualifications Required Qualifications and Experience Education • Masters degree in Migration in Migration Studies, or a related field Experience &amp; Skills • Minimum of 10 years of professional experience in curriculum design and development, specifically for adult learning, vocational training, or capacity building programs. • Demonstrated experience in developing educational content, particularly related to safe migration, labor migration, and reintegration. • Proven ability to conduct desk research, synthesize complex information, and translate it into practical training materials. • Familiarity with the socio-political context of Iraq or the Middle East region is highly desirable. Languages • English language proficiency is required. Arabic language proficiency is an added advantage. Note: As part of your application, please submit a financial proposal outlining your approach and fees to complete the assignment. Required Competencies IOM s competency framework can be found at this link . Competencies will be assessed during the selection process. Values - all IOM staff members must abide by and demonstrate these five values: • Inclusion and respect for diversity : Respects and promotes individual and cultural differences. Encourages diversity and inclusion. • Integrity and transparency : Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Required Qualifications and Experience</h2><p><b>Education</b></p><ul><li>Masters degree in Migration in Migration Studies, or a related field</li></ul><p><b>Experience &amp; Skills</b></p><ul><li>Minimum of 10 years of professional experience in curriculum design and development, specifically for adult learning, vocational training, or capacity building programs.</li><li>Demonstrated experience in developing educational content, particularly related to safe migration, labor migration, and reintegration.</li><li>Proven ability to conduct desk research, synthesize complex information, and translate it into practical training materials.</li><li>Familiarity with the socio-political context of Iraq or the Middle East region is highly desirable.</li></ul><p><b>Languages</b></p><ul><li>English language proficiency is required.</li><li>Arabic language proficiency is an added advantage.</li></ul><p><b>Note:</b> As part of your application, please submit a financial proposal outlining your approach and fees to complete the assignment.</p><p><b>Required Competencies</b></p><p>IOM s competency framework can be found at this link . Competencies will be assessed during the selection process.</p><p><b>Values</b> - all IOM staff members must abide by and demonstrate these five values:</p><ul><li>Inclusion and respect for diversity : Respects and promotes individual and cultural differences. Encourages diversity and inclusion.</li><li>Integrity and transparency : Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</li><li>Professionalism : Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.</li><li>Courage : Demonstrates willingness to take a stand on issues of importance.</li><li>Empathy : Shows compassion for others, makes people feel safe, respected and fairly treated.</li></ul><p><b>Core Competencies behavioural indicators</b></p><ul><li>Teamwork : Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.</li><li>Delivering results : Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.</li><li>Managing and sharing knowledge : Continuously seeks to learn, share knowledge and innovate.</li><li>Accountability : Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.</li><li>Communication : Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.</li></ul><p></p></section>

<p>The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects</li><li>Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of one (1) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines</li><li>Valid Driver s License</li></ul><p>Preferred:</p><ul><li>Degree/Associate Degree in Technical Field or Gas Turbine Systems</li></ul><p>Desired Characteristics:</p><ul><li>Ability to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking</li><li>Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Their role is essential to supporting large systems (power, generators, and cooling systems), by ensuring the safety and continued operation of the equipment. Datacenter site access control in relation with change management and fault management processes Datacenters power equipment s and elements monitoring 24/7 Daily power elements maintenances services (regular, preventive and corrective) Risk highlight with visual inspections (non-remote-control parts) Check daily load and power stability Take care and maintain all Telecom parts including whole shelters, racks, tray, ladders &amp; tower. Systemize, labeling arrangement all items inside Datacenter with daily basis checkup. Coordinate with security and safety team for prevent plan Immediate action during any incident as the job location will be onside Datacenters</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Mechanical /Electrical Prep industry /technology institute 1-2 year experiences in field Technical knowledge (Power, Generators and cooling) Mechanical /Electrical regular &amp; preventive procedures Behavioural Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Technical Competencies: Data Centre Operation &amp; Maintenance Network Monitoring Technical Writing and Reporting Problem Solving Technical Writing and Reporting</p><p></p></section>