وظائف طبيب جلدية في العراق

<p>The Chief Medical Officer is responsible for providing medical oversight, direction, and leadership to the medical staff regarding all areas of healthcare for the project. They also provide on-site medical support and healthcare services to the client and customer work force that is comprised of US Government personnel, US nationals, foreign nationals, local/host country national employees, and a small group of Iraq military personnel at an Iraqi military base. Oversee, supervise and manage the operation of all medical services, including overall supervision of all medical personnel. Provides leadership, oversight, and accountability for the operational effectiveness of medical services delivered on project. Leads quality development and clinical governance agendas including maintaining Code of Conduct of medical practice, medical record keeping, infection control standards, emergency response. preparedness, medical staff, and patient safety at the facility. Serves as the chair of the Medical Executive Committee (MEC) which meets monthly. Ensures that meeting minutes are written and uploaded to Share Point. Provides oversight of other committees of the facility (e.g. Pharmacy &amp; Therapeutics, Credential and Privileging, Peer Review, Infection Control). Ensure that the committees report regularly to the MEC. Ensures that monthly routine peer review of medical charts is performed, and peer review results are uploaded to Share Point. Ensures that all Focus Professional Practice Evaluations (FPPE) and Ongoing Professional Practice Evaluations (OPPE) are current. Provides direction, as appropriate to clinical case management including patient movements and referral off island in close collaboration with insurance companies and company medevac providers. Works closely with the other leaders supporting the ROBR2 project to ensure business continuity from a medical aspect. Promotes International SOS Government Medical Services, Inc. Standard Operating Procedures and Protocols. Supervises all healthcare providers including physicians, surgeons, mid-level providers and dentist. Provides strategic direction for medical staff and physician services programs to meet short- and longterm goals. Serves as the clinical leader for the organization and provides support and education for other clinical leaders. Reports on metrics to measure the impact of physician services. Participates in the development of administrative policies and approves medical practice procedures, policies, guidelines, and SOPs. Provides advice on the suitability of existing medical equipment and makes recommendations on future equipment needs. Ensures periodic review of practice management functions and reviews patient satisfaction surveys and complaints. Participates in site meetings with onsite government representatives as requested by the Project Manager. Participates in all government audits under the SOW as requested by the Project Manager. Provide medical evaluation and triage of patients. Examine and diagnose patients for illness and injury. Treat emergent, acute and chronic conditions, evaluate symptoms, offer preventative care. Prescribe and administer medication, treatment, and therapies. Order, perform, interpret test results and analyze records and reports. Provide follow-up care for patients as needed. Collect, record, and maintain accurate patient health information and histories. Liaise with other medical staff to ensure continuity of care. Ensures that all medical records are meticulously and accurately maintained. Provide medical evaluations to include annual employee physicals, medical testing and the issuance of required immunizations. Ensure the contractor workforce is compliant with applicable US and host national laws for medical clearances. Stabilize and manage medical evacuation (MEDEVAC) services for patients identified as requiring higher level evaluation or services. Provide liaison with external agencies where required to promote chain of care continuity and professional referral/patient handover. Ensure best practice in line with clinical guidelines and SOPs. Actively participates in Mass Casualty exercises and events. Completes required organizational compliance education, including assigned requirements that are client-specified, for Joint Commission Healthcare Staffing Services certification or other regulatory bodies. This list is non-exhaustive, and the role holder may be required to undertake additional duties that are not specifically listed above. Additional Duties: Compliance with International SOS Government Medical Services, Inc. policies and procedures.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Completed a minimum of 5-years post-residency medical practice experience in the United States.</li><li>Have very high fluency in both oral and written English.</li><li>Current experience in direct patient care and must have worked a minimum of 6-months of the last 12-months in career field.</li><li>Experience on a military/government site, working as a government subcontractor or prime contractor is preferred.</li><li>Remote site experience preferred.</li><li>Graduated from an accredited US Medical School or equivalent international school.</li><li>Successfully completed residency, or equivalent training, in a US Hospital or equivalent international hospital in any one of three specialties: Family Practice, General Internal Medicine, or Emergency Medicine.</li><li>Hold a U.S. MD or DO current license with certifications(s) to practice medicine in the United States.</li><li>Current certifications in Basic Life Support (BLS), Advanced Cardiac Life Support (ACLS), and Advanced Trauma Life Support (ATLS).</li><li>DEA number or Equivalent.</li><li>Proficient IT skills including use of electronic medical records systems.</li><li>Ability to work independently in a fast-paced environment.</li><li>Maintain a calm, confident demeanor when in stressful situations.</li><li>Results oriented and able to meet project deliverables.</li><li>Cultural sensitivity and awareness.</li><li>Ability to multitask, prioritize and meet demanding deadlines.</li><li>Effective oral, written communication and interpersonal skills.</li><li>Physical Requirements: Sitting, standing, walking, climbing, bending/stooping, kneeling, twisting. Visual acuity. Minimal hearing loss. Push/pull/carry minimum 50 lbs.</li><li>Obtain medical clearance and maintain current immunizations.</li><li>Must be able to relocate to Balad, Iraq.</li><li>A valid passport is required</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The NWP Pipeline HSE Supervisor is in charge of monitoring/supervising contractors activities during constructions . With the support of the HSE Superintendent , HSE Supervisor will advise and assist the Company Site Team on daily basis management . The main focus of the role is to ensure HSE risks are properly evaluated and controlled by the Package team and its Contractors and to provide high standard HSE support to projects , from construction to start-up . Leadership Assist Company Site team and Contractors in the implementation of risk analysis, incidents management, permit to work process, and industrial hygiene implementation . Promote HSE culture on site safety talks and deployment of HSE tools i.e., Program "0 Fatality" (Safety Green Light, Life Saving Checks, Joint Safety Tour), Stop Card, Safety and Sustainability Moments, World Day for Safety celebration . Ensures similar programs and tools to be deployed by the Contractors on their own worksites. Risk Management Support Environmental Studies on site with appropriate risk assessments and Permit to Work system . Health and Environment Assist the Site Medical Doctor to implement the Company Health Plan, Medical fitness procedure, MEDEVAC procedure , participate to audit and inspection of camp facilities . Contractor and Suppliers Supervise Contractors activities and ensure they are carried in compliance with the HSE plans, HSE bridging documents, Risk Assessments during contract execution . Competency and Training Participate to the HSE induction/orientation . Emergency Preparedness Assist the HSE Superintendent and Package HSE Lead to set up, test, and continually update the Emergency plans . Incident Analysis Follow up on regular basis, Contractor Action tracking list resulting from incidents, anomalies, drills, HSE audits, and inspections . Participate in the reporting and investigation of incidents and anomalies . Audits and Inspections Participate in Site inspections and audits as scheduled. Performance Improvement Assist HSE Superintendent and the Package HSE Lead organizing Site HSE Committee Meetings . Report daily basis to HSE Superintendent . Assist the site team in the use of the reporting tools .</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum 5 years working experience in a high hazard industry , i.e., Construction, Oil &amp; Gas, onshore plant .</li><li>Professional HSE qualification at Diploma / Degree level minimum.</li><li>Knowledge of HSE culture tools and programs .</li><li>Highly proficient in spoken and written English .</li><li>Spoken and written Arabic is a plus.</li></ul><p>Ability to impulse positive change . Exemplarity and open communication . Conflict resolution .</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b><i>Your expertise can spark the next breakthrough. Become a Field Medical Advisor at AstraZeneca and turn cutting-edge research into meaningful patient outcomes.</i></b></p><br><p><b>ABOUT ASTRAZENECA</b></p><br><p>AstraZeneca is a global, science-led, patient-focused biopharmaceutical company that focuses on the discovery, development and commercialization of prescription medicines for some of the world’s most serious diseases. But we’re more than one of the world’s leading pharmaceutical companies.</p><br><p>Join a high-performing team, empowered to cut through the noise and drive real change. Our agility and pace, coupled with scientific focus, powers us to spot opportunities in the market that keep us moving forward and into new spaces.</p><br><p><b>Why AstraZeneca?</b></p><br><p>At AstraZeneca we’re dedicated to being a Great Place to Work. Where you are empowered to push the boundaries of science and unleash your entrepreneurial spirit. There’s no better place to make a difference to medicine, patients and society. An inclusive culture that champions diversity and collaboration, and always committed to lifelong learning, growth and development. We’re on an exciting journey to pioneer the future of healthcare.</p><br><p><b>ABOUT THE ROLE</b></p><br><p><b>Job Purpose:</b></p><br><p>As a Field Medical Advisor, you will execute the Medical Affairs Plan for assigned therapeutic area(s), providing scientific support for AstraZeneca products while building scientific partnerships with Healthcare Professionals (HCPs) and Key External Experts (KEEs). You will contribute to the implementation of the medical strategy through scientific exchange, stakeholder engagement, evidence generation, and actionable medical insights that enhance patient care and support the adoption of innovative medicines.</p><br><p><b>Key Responsibilities:</b></p><br><ul><li>Engage in scientific exchange with Healthcare Professionals (HCPs), Key External Experts (KEEs), and other relevant stakeholders in line with medical objectives.</li><li>Maintain deep clinical and scientific expertise in the disease area, AstraZeneca products, emerging therapies, and the competitive landscape.</li><li>Build and maintain scientific relationships with HCPs, KEEs, healthcare institutions, and other key stakeholders to support ongoing scientific dialogue.</li><li>Support the development and execution of the Field Medical Strategic Plan and provide scientific support to internal and external stakeholders.</li><li>Organize and facilitate scientific meetings, symposiums, advisory boards, and other non-promotional medical activities.</li><li>Support evidence-generation activities, including clinical studies, investigator-sponsored research, publications, and collaborations with Clinical Research Operations.</li><li>Gather and communicate actionable insights from the external medical environment to inform medical, product, and clinical development strategies.</li><li>Support patient access by aligning scientific engagement with medical strategy, patient journey needs, and healthcare system priorities.</li><li>Leverage digital tools and innovative approaches to enable scientific exchange and patient-centric solutions.</li><li>Ensure compliance with AstraZeneca standards, applicable regulations, and pharmacovigilance requirements in all medical activities.</li></ul><p><b>Job Requirements:</b></p><br><p><b><u>Essential Criteria:</u></b></p><br><ul><li>Medical Doctor (MD) or Pharmacist.</li><li>3+ years of experience in a similar role in Medical Affairs, within a multinational pharmaceutical company.</li><li>Experience in specialty lines (e.g., Oncology, Hematology, Rare Disease, Metabolic Diseases).</li><li>Proven stakeholder-management track record with KOLs, HCPs, and cross-functional partners.</li><li>Strong expertise in stakeholder engagement and relationship management with HCPs and KOLs.</li><li>Demonstrated ability in project management and cross-functional collaboration.</li><li>Excellent scientific knowledge, presentation, and communication skills.</li><li>Flexibility to travel as business needs require.</li><li>Experience working directly with a brand-owning company (not solely through a distributor) or, if working with a distributor, clear evidence of close collaboration with the parent/mother company.</li></ul><p><b><u>Preferred Criteria:</u></b></p><br><ul><li>Post-graduate degree (e.g., MSc, PhD) in a relevant scientific or medical discipline.</li><li>Experience in account management.</li></ul><p><b><i>Please note that this position is based in Baghdad and is not open for relocation; only apply if you are located in or can easily access this location.</i></b></p><br><p><b>Date Posted</b></p><br>02-Aug-2026<p><b>Closing Date</b></p><br>08-Aug-2026<p>AstraZeneca embraces diversity and equality of opportunity. &nbsp;We are committed to building an inclusive and diverse team representing all backgrounds, with as wide a range of perspectives as possible, and harnessing industry-leading skills. &nbsp;We believe that the more inclusive we are, the better our work will be. &nbsp;We welcome and consider applications to join our team from all qualified candidates, regardless of their characteristics. &nbsp;We comply with all applicable laws and regulations on non-discrimination in employment (and recruitment), as well as work authorization and employment eligibility verification requirements.</p><br> </div>

<p>Managing the office side of project execution on a day-to-day basis: ensuring sites have the materials, machinery, and approvals they need before they are required, and converting drawings, specifications, and bill of quantities into actionable, approved information; measuring what has been completed, documenting, certifying, and uploading it in the interim statements so the company receives its full dues on time. This role is the liaison between sites, suppliers, and the client consultant, and conveys this liaison in English.</p><p><strong>&nbsp; Tasks and responsibilities &nbsp;</strong></p><p><strong>First: Office logistics and procurement support</strong></p><p>▪&nbsp;&nbsp;&nbsp; Consolidate material requests from all sites into a single organized purchase plan, in sequence of the project schedule, rather than processing each request separately.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical RFIs and RFQs, and obtain at least three quotes for each material or service of significant value.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical and financial comparison tables, verify each quote against specifications, and raise recommendations to management for award.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare internal purchase requests, follow up on issued purchase orders, fix delivery dates, and expedite any supplier that is delayed.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a material tracking log — what was requested, in transit, delivered, and still pending — and circulate weekly.</p><p>▪&nbsp;&nbsp;&nbsp; Identify long lead-time materials at the start of each project, and notify management in writing of any material threatening its planned delivery schedule.</p><p>▪&nbsp;&nbsp;&nbsp; Coordinate transport, hire machinery, and equipment movement between sites, and secure related permits.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of machinery and equipment: location, operating hours, fuel consumption, maintenance dates, and certificate validity.</p><p>▪&nbsp;&nbsp;&nbsp; Control minimum stock levels of consumables and monitor their distribution to sites against signed requests.</p><p><strong>Second: Delegation of works from the technical office</strong></p><p>▪&nbsp;&nbsp;&nbsp; Review drawings, specifications, and BOQs before work starts, raise RFI on any conflict to be resolved at the office, not on site.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare as-built (Shop Drawings) and As-Built drawings, reinforcement schedules, and cutting lists.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare and submit material submittals with their technical data, and maintain a log of their status and dates.</p><p>▪&nbsp;&nbsp;&nbsp; Issue the latest approved edition of each drawing to site, and withdraw obsolete editions from circulation.</p><p>▪&nbsp;&nbsp;&nbsp; Compile quantities from drawings and compare with the BOQ; define additional works before execution, not after.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare method statements, ITPs, and material approval requests.</p><p>▪&nbsp;&nbsp;&nbsp; Review daily and weekly site reports, update progress against the schedule, and raise variances with reasons.</p><p><strong>Third: Measurement, interim payments, and cost control</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare interim monthly progress certificates: measurement sheets, quantities, supporting documents, and a pictorial record, submitted on the contractual date.</p><p>▪&nbsp;&nbsp;&nbsp; Verify subcontractor interim payments against actual billed works, and certify only what is proven.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare change orders and extension requests with supporting documents and cost analysis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a comparison of actual cost vs budget for each item in the BOM and escalate any overruns when they occur, not at project close.</p><p>▪&nbsp;&nbsp;&nbsp; Reconcile material consumption with theoretical quantities from drawings and report waste or loss.</p><p><strong>Fourth: Subcontractors and suppliers</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare scopes of work for subcontractors and RFQ packages, and compare bids on a comparable basis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain approved suppliers and subcontractors lists, with contact details, prices, and past performance records.</p><p>▪&nbsp;&nbsp;&nbsp; Monitor validity of subcontractor insurance and bonds, registrations, and work permits, and provide warnings before expiry.</p><p><strong>Fifth: Planning and reporting</strong></p><p>▪&nbsp;&nbsp;&nbsp; Maintain baseline schedule and update actual progress on agreed dates (MS Project or Primavera P6).</p><p>▪&nbsp;&nbsp;&nbsp; Prepare weekly and monthly progress reports, including the cumulative progress curve (S-Curve), labor and equipment curves, and pictorial log.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of action items arising from client, consultant, and internal meetings, and follow through to closure.</p><p>▪&nbsp;&nbsp;&nbsp; Contribute to preparing tender timelines, method of execution, and resource schedules accompanying bids.</p><p><strong>Sixth: Documentation and correspondences in English</strong></p><p>▪&nbsp;&nbsp;&nbsp; Draft technical correspondences, RFIs, approvals, transmittals, and progress reports in English with sound technical terminology.</p><p>▪&nbsp;&nbsp;&nbsp; Attend meetings with clients and consultants, present the technical position, and prepare meeting minutes.</p><p>▪&nbsp;&nbsp;&nbsp; Control project documentation: numbering, transmittal log, drawing register, and archiving all outgoing and incoming items in an organized manner.</p><p>▪&nbsp;&nbsp;&nbsp; Note: Company clients are international entities and organizations, and their contracts, specifications, and correspondences are in English only; thus English writing proficiency is a mandatory requirement for this role, not an added bonus.</p><p><strong>&nbsp; Qualifications and experience &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Bachelor’s degree in Civil Engineering (preferred), or Electrical or Mechanical Engineering, from a recognized university.</p><p>▪&nbsp;&nbsp;&nbsp; Valid membership in the Engineers Syndicate or equivalent in the work country.</p><p>▪&nbsp;&nbsp;&nbsp; Four (4) years of experience or more with a contracting company in the technical office or in project execution; design office experience alone is not a substitute.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in English speaking and writing — mandatory. Arabic is the daily language for site coordination.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in AutoCAD, advanced Excel, Word, and MS Project or Primavera P6; familiarity with Revit and BIM systems is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to quantify accurately and read civil, structural, and MEP drawings and specifications.</p><p>▪&nbsp;&nbsp;&nbsp; Practical knowledge of FIDIC contracts and the structure of BOQs and certifying interim payments is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Valid driving license and willingness to travel to sites.</p><p><strong>&nbsp; Personal skills and competencies &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Numerical accuracy — this role deals with quantities that translate into money, and any miscalculation will cost later.</p><p>▪&nbsp;&nbsp;&nbsp; Organizational ability to manage multiple projects concurrently without neglecting any.</p><p>▪&nbsp;&nbsp;&nbsp; Proactive rather than reactive: procurement and submission ahead of need, not after work stops due to shortage.</p><p>▪&nbsp;&nbsp;&nbsp; Clear and proper English writing, enabling communication with the consultant without rephrasing the letter.</p><p>▪&nbsp;&nbsp;&nbsp; Discretion in dealing with prices, costs, profit margins, and supplier terms.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to stand firm on a technical position under client or consultant pressure, and escalate to management instead of yielding.</p><p><strong>&nbsp;</strong></p>

<p><strong>Job Description</strong></p><p>Company <strong>Adera for Conferences and Exhibitions</strong> announces its need for a <strong>Representative / Secretary</strong> to join the team, with the applicant possessing strong communication skills and the ability to organize administrative tasks and coordinate with clients and partners.</p><p><strong>Responsibilities:</strong></p><ul><li>Answering phone calls and responding to inquiries.</li><li>Organizing appointments and meetings and managing the agenda.</li><li>Following up on official correspondence and emails.</li><li>Coordinating with clients, doctors, and collaborating entities.</li><li>Preparing official books, reports, and administrative files.</li><li>Following up on daily tasks and organizing documents and archiving.</li><li>Representing the company professionally during visits and meetings.</li><li>Carrying out other administrative tasks assigned by management.</li></ul><p><strong>Required Qualifications:</strong></p><ul><li>Diploma or bachelor's degree (preferred).</li><li>Proficiency in using Microsoft Office programs (Word, Excel, Outlook).</li><li>Excellent communication and organizational skills.</li><li>Ability to withstand work pressure and work in a team.</li><li>Courtesy, good appearance, and professional conduct.</li><li>Previous experience in secretarial, sales, or customer service is preferred.</li></ul><p><strong>Job Location:</strong> Baghdad.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary:</p><p>The BIM/Design Coordinator is responsible for coordinating all project design disciplines including</p><p>Architectural, Structural, and MEP to ensure fully coordinated, clash-free, accurate, and constructible drawings</p><p>are issued for construction.</p><p>The role acts as the central technical coordination point between consultants, contractors, suppliers, and</p><p>internal project teams to minimize design conflicts, delays, RFIs, and rework during construction.</p><p>The BIM/Design Coordinator manages design workflows, drawing control, interdisciplinary coordination, BIM</p><p>processes, and technical communication throughout the project lifecycle.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Primary Duties and Responsibilities:</p><p><br></p><p>Design Coordination</p><p> Coordinate Architectural, Structural, and MEP drawings and models.</p><p> Review all consultant drawings for completeness, consistency, constructability, and</p><p>clashes.</p><p> Ensure all disciplines are aligned before issuance for construction.</p><p> Identify design conflicts and coordinate resolutions with consultants.</p><p> Conduct technical coordination meetings with all design stakeholders.</p><p><br></p><p>BIM Coordination</p><p> Manage BIM coordination process using Revit, Navisworks, and BIM 360/ACC.</p><p> Perform clash detection and issue clash reports.</p><p> Coordinate federated BIM models from all disciplines.</p><p> Ensure BIM models comply with project standards and LOD requirements.</p><p><br></p><p>Drawing Management &amp; Document Control</p><p> Maintain master drawing register.</p><p> Ensure proper revision control and drawing status tracking. Verify that only latest approved drawings are issued to site teams.</p><p> Track IFC, shop drawings, and as-built drawings.</p><p><br></p><p>Technical Review &amp; Constructability</p><p> Review consultant drawings for constructability.</p><p> Identify impractical or conflicting design details before execution.</p><p> Support resolution of RFIs and technical queries.</p><p><br></p><p>Site Coordination Support</p><p> Assist construction teams in interpreting design documents.</p><p> Participate in site inspections and technical meetings.</p><p> Support resolution of unforeseen site clashes.</p><p><br></p><p>Design Change Management</p><p> Track and document all design changes.</p><p> Assess impact of design revisions on cost, schedule, and construction.</p><p> Maintain change logs and coordination records.</p><p><br></p><p>Reporting &amp; Documentation</p><p> Prepare weekly coordination reports.</p><p> Maintain clash logs and RFI logs.</p><p> Coordinate communication between consultants and stakeholders.</p><p><br></p><p>Qualifications</p><p> Bachelor’s Degree in Civil Engineering, Architectural Engineering, or MEP Engineering.</p><p> 4+ years in construction design coordination or BIM coordination.</p><p> Experience in residential/building construction projects.</p><p> Experience coordinating Architectural, Structural, and MEP systems.</p><p> Experience with consultant and contractor coordination.</p><p><br></p></div>

<p><h4>Job description</h4> <p><strong>Security manager - EPCM - onsite</strong></p> <p><strong>Company:</strong> KBR - Iraq</p> <p><strong>Discipline:</strong> HSSE</p> <p><strong>Location:</strong> Basra, Iraq</p> <p><strong>Hiring manager:</strong> Project director</p> <p><strong>Location split:</strong> Onsite - 28/28 rotation</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Responsible for personnel involved in the organization’s physical security function, which includes monitoring systems related to the flow of personnel and vehicular traffic, personnel/visitor security clearances, loss prevention and detection services management, and security inspections. Under broad supervision, applies specialist knowledge or skills to solve complicated and unique challenges, or directs the daily activities of a business, technical, or functional support team. Establishes priority for completing prescribed tasks. Uses judgment to interpret internal and external concerns and create best practices. May direct resources, prioritize work, and guide less experienced team members. Relies on experience, interpersonal skills, and a thorough knowledge of the industry to complete tasks in accordance with policies, processes, and corporate strategy.</p> <h4>Responsibilities</h4> <ul> <li>Principal advisor to the program director (projects) / project director on all security related matters and information.</li> <li>Development of the overall security strategy to mitigate security risks.</li> <li>Lead the project crisis management team.</li> <li>Creating emergency response plans.</li> <li>Develop, implement, and test emergency evacuation procedures.</li> <li>Maintain personnel on board, ISOS evacuation manifest lists, and Iraq plans database.</li> <li>Create reports for management of country specific security status.</li> <li>Manage all aspects of contracted private security companies in line with contracted services.</li> <li>Implement security compliance of sub-contractors.</li> <li>Conduct security audits.</li> <li>Security coordination of daily movements for contracted private security companies and fleet of soft skin vehicles.</li> <li>Monitor sub-contractor IVMS system, reporting biweekly data output.</li> <li>Maintain sub-contractor annual security training program.</li> <li>Security consultant and focal point of contact for all other KBR projects within Iraq.</li> <li>Provide and maintain security / hotel risk assessments.</li> <li>Liaise with other KBR projects point of contact based at and outside Rumaila oil field on security-related matters.</li> <li>Ensure regular security toolbox talks are conducted.</li> <li>Maintain a professional, courteous and strong relationship with client security management.</li> <li>Provide input to KBR security management documentation and plans.</li> <li>Undertake interdepartmental liaison to ensure effective communication between staff on matters of EPCM security standards.</li> <li>Assist with assurance audits of EPCM security projects both on Rumaila oilfield and outside to ensure that EPCM security standards are implemented and maintained.</li> <li>Assist with any other tasks, as required by the regional EMEA security manager.</li> </ul> <h4>Experience</h4> <ul> <li>Proven ability with international projects working in high-risk environments and contexts and operating in unsecured environments.</li> <li>High level of experience, ready to learn developing security related technical tools, guidelines and systems as well as able to work under minimal supervision.</li> <li>Understanding of principles and code of conduct associated with a specific sector and/or sub-sector of work.</li> <li>Effective and clear communicator, ability to collaborate across teams and geographies and initiates and skilled in interdisciplinary problem solving.</li> <li>Ability to gain a precise understanding of the various local, regional, country, and international policies, operational positions, and interactions, providing clear dynamic briefings and analysis of given and unfolding security and political situations when they occur.</li> <li>Strong assessment, evaluation, analysis, and strategic planning and project management skills.</li> <li>Excellent interpersonal skills with demonstrated ability to manage and work under stressful conditions.</li> <li>Understanding of the local political, contextual, and ethical issues.</li> <li>Previous experience interacting with local government agencies, and other foreign agencies to implement security strategies and procedures relating to security and safety matters.</li> <li>Oil and gas experience preferred.</li> <li>Full clean driving license.</li> </ul> <h4>Technical skills / knowledge</h4> <ul> <li>Operational management</li> <li>Risk management and risk assessments</li> <li>The ability to communicate effectively at all levels and be able to verbally brief and articulate.</li> <li>Meticulous organizational and time-keeping skills.</li> <li>Ability to function effectively with limited supervision and in high pressure situations.</li> <li>Ability to work in a high pressure and demanding environment.</li> <li>Ability to work cohesively and communicate successfully in multi-cultural teams whilst being aware of and sensitive to cultural differences.</li> <li>Computer literacy.</li> <li>English first language.</li> <li>Proficient in Microsoft Office programs and related software.</li> </ul> <h4>Qualifications / certifications requirements</h4> <p><strong>Essential</strong></p> <ul> <li>Undergraduate degree with ten years of security experience in corporate security, law enforcement or military.</li> <li>Degree may be substituted with 13+ years of security, military or law enforcement experience, 3+ of which should be in management.</li> </ul> <p><strong>Desirable</strong></p> <ul> <li>Military veteran preferred – ex military warrant officer or senior non-commissioned officer.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Freelance Partner – Build your own global project!<br>Are you ready to shift from an employee mindset to an entrepreneurial mindset?<br>We seek ambitious independent partners ready to embrace the entrepreneurial spirit, moving away from traditional employment. At the 1% Club, we believe true success comes from taking charge of your own destiny, not waiting for a monthly paycheck.<br>Nature of the partnership:<br>This is not a traditional job with a fixed salary. This is a freelance/partnership opportunity allowing you to establish your own project under our umbrella. Your income here is unlimited and directly linked to your effort, results, and creativity in building your client base.<br>What will this partnership offer you?<br>Complete freedom: You are your own boss. Work from anywhere in the world and at the pace that suits you.<br>Incremental income: A very rewarding commission structure that ensures you are compensated for your real efforts.<br>Continuous development: Access to a comprehensive distribution system and professional training to enhance your leadership and sales skills.<br>Entrepreneurial environment: Work with a select group of ambitious and continuously growing individuals.<br>Joining requirements (Training system):<br>We believe that "mindset precedes skill". Therefore, to ensure your success in building this business, joining the team requires full commitment to:<br>Introductory workshop: To gain a deeper understanding of the business model.<br>Intensive training courses: To master the distribution and consulting sales system (we provide training free of charge as an investment in your success, in exchange for your commitment to learning and applying).<br>Your tasks as a business partner:<br>Build and develop a client base: Seek new opportunities and expand in the market.<br>Manage relationships: Build long-term partnerships with clients to ensure the sustainability of your project’s success.<br>Consultative selling: Provide tailored global solutions to clients based on their needs.<br>Achieve growth: Reach your financial goals through strategic planning for your project’s growth.<br>Are you the right person?<br>Entrepreneurial by nature: You have the passion to build something of your own and take full responsibility.<br>Exceptional communication skills: You possess a high ability to persuade and negotiate.<br>Self-discipline: You can manage your time effectively without the need for direct supervision or guidance.<br>Commitment: You have a genuine willingness to invest time in learning the rules of the game and commit to training practices to achieve professionalism.<br>How to start your journey?<br>If you are ready to start building your own business with us, do not hesitate to apply.<br>Please send your CV via direct messages (DM), and our team will review the applications and select the most suitable candidates to invite them for the initial introductory session.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><ul><li>Persuasion and Negotiation</li><li>Copywriting</li><li>Analytical Listening</li><li>Personalization</li><li>Dialogue Management</li></ul></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior QA/QC Manager leads in the development of strategies and processes of QA/QC department by implementing policies, procedures, regulations of quality control work and supervisory techniques to ensure that work is executed within specific methods, project quality plan guidelines and procedures that can assure high quality of services and products, customer satisfaction, continuous improvement of processes and services.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Prepare and maintain project QA/QC plan to meet the project quality requirements.</p><br> <p>Establish project quality objectives in line with IMS corporate objectives; monitors submittal status of QA/QC reports and reviews all technical submittals.</p><br> <p>Build and implement a control system for suppliers and subcontractors and conducts site audits.</p><br> <p>Attend all required/related meetings and arranges all project Quality requirements with the project owner, consultant, and project management team.</p><br> <p>Oversee the review material submittals and method statements submitted by the contractor to ensure the quality requirements set on the project is met.</p><br> <p>Prepare the project QA/QC plan and supervise all amendments and revisions in order to meet the project quality requirements and client’s expectations.</p><br> <p>Ensure to prepare the project QA/ QC plan within 30 days from the start of contract and get it approved from the consultant.</p><br> <p>Prepare the project QA/QC plan and supervise all amendments and revisions in order to meet the project quality requirements and client’s expectations.</p><br> <p>Ensure to prepare the project QA/ QC plan within 30 days from the start of contract and get it approved from the consultant.</p><br> <p>Ensure that review is undertaken on a quarterly or on a need basis.</p><br> <p>Ensure to supervise all amendments and track and record revisions to the QA/ QC plan after any amendment and issue to all concerned parties.</p><br> <p>Establish project quality objectives in line with IMS corporate objectives and ensure to monitor submittals of QA/QC reports.</p><br> <p>Ensure to prepare, review and amend quality objectives as per client requirements within 30 days of the start of the project and ensures its alignment with corporate QMS objectives.</p><br> <p>Build and implement a control system for suppliers and subcontractors</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Identifies staff development and training needs and ensures that trainings are obtained.</p><br> <p>Ensures to prepare during the beginning of the project the project training matrix and ensure that all trainings are carried out as planned.</p><br> <p>Ensures to monitor the effectiveness of the trainings on a need basis or minimum bi- annual basis.</p><br> <p>Manages to attend all required/related meetings and arrange all project Quality requirements with the project owner, consultant, project management.</p><br> <p>Ensures 100% coordination with project owner/ consultant/project management at all times and ensure that weekly scheduled meetings are carried out, and all records are documented; attendance sheets, minutes …etc.</p><br> <p>Ensures that all actions recorded in the minutes of meetings are followed up.</p><br> <p>Implements IMS procedures at project sites.</p><br> <p>Ensures that all QMS processes are followed, all approved forms are filled and all documents are generated as per the company procedures.</p><br> <p>Ensures that QMS trainings are carried out for all concerned staff of the project and all site staff and new joiners are complying 100% with the QMS requirements.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Comprehensive understanding of quality assurance and quality control principles, methodologies, and regulatory requirements.</p><br> <p>Strong leadership and managerial skills to oversee QA/QC teams, develop processes, and ensure compliance with standards.</p><br> <p>Excellent analytical abilities to identify quality issues, analyze root causes, and implement corrective actions.</p><br> <p>Proficiency in quality management systems and tools to monitor and improve product quality and processes.</p><br> <p>Effective communication and collaboration skills to liaise with internal teams, suppliers, and regulatory agencies to maintain quality standards.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 years working experience, 5 years in a relevant supervisory position, 2 years GCC experience is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Quality Assurance L4<br>Statistical Quality Control L4<br>Sub-contractor Quality Management L4<br>Total Quality Management L4<br>QA Audits L4<br>Build High-Performing Teams<br>Provide Direction<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Civil Engineering or in any Engineering related discipline (e.g. Mechanical, Electrical)<br>Professional Qualification in Lead Auditor certification (ISO 9001 or equal) or ASQC certification (CQM/CQE).<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>E&amp;I Engineer<br><br>E&amp;I EngineerECSS30 - Sr. Specialist, Commissioning<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p><br><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>&nbsp;International Organization for Migration Project Context and Scope The project titled Inclusive Stabilization Partnerships for Reintegration and Empowerment (INSPIRE) is a five-year programme (July 2026 June 2031) funded by the Ministry of Foreign Affairs of the Kingdom of the Netherlands (MFA) and implemented by the International Organization for Migration (IOM). INSPIRE will operate in Ninewa, Anbar, and Salah al-Din Governorates, with national-level engagement in Baghdad. The project aims to address key barriers faced by vulnerable internally displaced persons (IDPs), returnees (including Iraqi individuals from northeast Syria), and host community members in accessing basic services, civil documentation, and durable solutions. It operates across three interconnected levels: individual, community, and systemic, organized under three outcomes: Outcome 1: Improved access to basic services and durable solutions pathways for vulnerable displaced populations Outcome 2: More resilient and cohesive communities in areas of high return, with empowered local civil society structures Outcome 3: Enhanced national and local government capacity to plan, coordinate, and deliver services to Iraqi citizens Inception Phase Recognizing Iraq's evolving context, with shifting return and displacement patterns, changing funding priorities, and significant differences across governorates and districts - INSPIRE will begin with a three-month inception phase. This phase is critical to ensure that the five-year programme is evidence-based, context-sensitive, and strategically targeted from the outset. The Inception Phase will produce one core output: the Inception Report. The Report will contain: A detailed Year 1 Intervention Plan, identifying priority locations and beneficiary groups based on current conditions; and A five-year Strategic Impact Monitoring Framework, aligned with INSPIRE's Results Matrix and Theory of Change. The Inception Report will integrate multiple data sources, including: IOM Displacement Tracking Matrix (DTM) data; funding and intervention mapping to identify gaps where INSPIRE can add value without duplication; field consultations with local authorities, community leaders, and potential beneficiaries; and interviews with Government of Iraq (GoI) counterparts, local CSOs, UN agencies, and international partners. The Inception Phase will conclude with a Validation Workshop convening the Government of the Netherlands, relevant Iraqi ministries, the UN Resident Coordinator's Office (RCO), and key partners to finalize the Year 1 workplan and agree on coordination structures, including annual revision mechanisms. The INSPIRE inception phase requires specialized expertise in programme design, durable solutions programming, stakeholder consultation methodologies, conflict-sensitive analysis, and strategic results framework development. Given the time-bound nature of the inception phase and the need for independent technical expertise to support the development of the Inception Report and associated strategic frameworks, these services cannot be fully met through existing project staffing resources during the inception period. Therefore, IOM seeks to engage a consultant to provide targeted technical advisory support for this assignment. Organizational Department / Unit to which the Consultant is contributing Under overall guidance of the Chief of Mission (CoM), and the direct supervision of the Senior Programme Coordinator in close coordination with the involved IOM teams. The consultancy is open to international consultants and will be primarily remote. Field missions to Iraq will be required for stakeholder consultations, fieldwork, and facilitation of the Validation Workshop. Mission timing and locations will be agreed with the IOM Senior Programme Coordinator based on operational needs and security considerations. Scope of Work The consultant will provide senior-level technical advisory support and facilitate the analytical and consultative process for the development of the INSPIRE Inception Report and associated strategic frameworks. The consultant will provide advisory services only and will not have decision-making, supervisory, or representational authority on behalf of IOM The consultant's responsibilities include: Conducting a comprehensive desk review of relevant secondary data sources, including IOM DTM reports, existing assessments (legal, protection, MHPSS, livelihoods), prior IOM project documentation, and national/UN strategic frameworks (UNSDCF, National Plan to End Displacement, Yazidi Survivors Law, INAP III) Developing and implementing a stakeholder consultation methodology, including Key Informant Interviews (KIIs) and focus group discussions, with GoI counterparts (federal and KRG), local CSOs, UN agencies, international partners, community leaders, and affected populations across Ninewa, Anbar, and Salah al-Din Conducting a funding and intervention mapping exercise to identify ongoing and planned interventions in target areas, assess complementarity, and identify gaps where INSPIRE can add value Analysing IOM DTM and other displacement data to ensure targeting reflects current displacement and return dynamics Development of a strategic Year 1 Intervention Plan, including prioritized locations, target beneficiary groups, preliminary activity plans, and indicative resource allocation, in coordination with the IOM programme and MEAL teams Developing a five-year Strategic Impact Monitoring Framework aligned with the INSPIRE Results Matrix, Theory of Change, and SRoL/DSH indicators Supporting the facilitation, preparation and documentation of the Validation Workshop with the Government of the Netherlands, Iraqi ministries, UNRCO, and key partners Incorporating stakeholder feedback and finalizing the Inception Report for submission and publication&nbsp;</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Advanced university degree (Master's or equivalent) in Political Science, International Development, Humanitarian Affairs, Conflict Studies, Sociology, Migration Studies, or a related field. A first-level university degree with significant directly relevant experience may be accepted in lieu of an advanced degree.</li><li>A minimum of 7 years of progressively responsible professional experience in programme development, project design, or research in humanitarian, stabilization, or development contexts.</li><li>Demonstrated experience developing reports or strategic frameworks for multi-year, multi-sectoral programmes in conflict-affected or post-conflict settings.</li><li>Proven experience conducting stakeholder consultations, KIIs, and field assessments in complex operating environments, ideally in Iraq or the MENA region.</li><li>Familiarity with the Iraq displacement and reintegration context, and the relevant GoI institutional landscape.</li><li>Experience with monitoring, evaluation, accountability, and learning (MEAL) frameworks, including results matrices and Theory of Change development.</li><li>Prior experience with IOM, UN agencies, or internationally funded programmes (particularly Dutch MFA-funded programmes) is a strong advantage.</li><li>Experience engaging with civil society organizations, and familiarity with protection, MHPSS, livelihoods, durable solutions, and community policing programming, is desirable.</li><li>Excellent analytical and writing skills, with a demonstrated ability to synthesize complex qualitative and quantitative data into clear, actionable recommendations.</li><li>Strong facilitation and stakeholder engagement skills, including experience facilitating multi-stakeholder workshops.</li><li>Proficiency in data analysis and presentation.</li><li>Ability to work independently, manage multiple tasks under time pressure, and deliver high-quality outputs on schedule.</li><li>Fluency in English (written and spoken) is required.</li><li>Proficiency in Arabic/Kurdish is advantageous.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Danish Refugee Council (DRC) is a leading international NGO with a specific expertise in forced displacement. It was founded in 1956 and today it is operating in 40 countries around the world, where it protects, advocates, and builds sustainable futures for refugees and other displacement affected people and communities. DRC has been active across Iraq since 2003 and plays a crucial role in addressing the complex humanitarian needs of displaced populations and conflict-affected communities. Operating in collaboration with local partners and authorities and adopting humanitarian, development, and peacebuilding (HDP) approaches, DRC focuses on providing a wide range of services to enhance the resilience and well-being of vulnerable individuals. DRC s work in Iraq has been focused on implementing multi-sectoral programming through an area-based approaches, integrating protection, economic recovery, humanitarian disarmament and peacebuilding programming as well as advocacy. By implementing context-specific solutions, DRC contributes to the stability and recovery of communities in Iraq, striving to create a more sustainable and inclusive future for those affected by displacement and conflict.</p><p>The purpose of this consultancy is to work with DRC in supporting ministry of labor and social affairs (MoLSA) in Kurdistan Region of Iraq (KRI) to modernize their vocational training program to enhance employment opportunities to youth and job seekers. The consultant (consultancy team) will 1) Review the existing solar panel curriculum of MoLSA. 2) in collaboration with DRC and MoLSA Directorate of vocational training in KRI, form a curriculum development technical committee from MoLSA technical trainers representing each governorate. 3) Lead organizing the technical committee meeting reviewing the existing curriculum and identifying the gaps and areas to be updated. 4) collect the inputs from the technical committee members about areas of gaps and improvement and lead combinging them and reflecting them on the curriculum content. 5) ensure effectively updating the existing curriculum as per the competency-based standards (CBT). DRC is looking for a consultancy firm with a technical specialist and a lead consultant to ensure the updated training curriculum matches with the labor market needs,</p><p>Vocational training centres under DoLSA play an important role in supporting youths and job seekers and equip them with the market driven and competency-based skills to prepare them for employment and the labor market. However, due to changes in the labor market, industry demands, and technological development, there may be a need for updated or new vocational training curricula that better align with current workforce needs In order to deliver relevant and effective vocational training to youth and job seekers in general, there is a need to update the solar panel competency-based curriculum that matches with the market changes and development of technologies. Through this consultancy work, DRC is going to support MoLSA to modernize their vocational training program to enhance employment opportunities to youth job seekers including women and people living with disabilities from different population categories of IDPs, refugees and vulnerable host communities.</p><p>The objective of the consultancy is to:</p><ul><li>Conduct a desk review of the existing solar panel curriculum to identify gaps and areas of improvement according to the labor market demand, skills gaps and context evolution. This review process might take different stages and will involve MoLSA Directorate of vocational training center technical trainers.</li><li>Establish and lead a technical committee with relevant stakeholders to collect needed information and support the curriculum update process.</li><li>Update the existing solar panel curriculum as per the competency-based standards (CBT) including facilitator guide, handouts and needed tools.</li><li>Ensure the updated curriculum is available in both English and Kurdish (Badini and Sorani) languages and handed to DRC.</li></ul><p>The consultant will be responsible for:</p><ul><li>Conduct a curriculum review process : conducting desk review of the existing curriculum and comparing with the CBT standards to identify the gaps and areas of improvement.</li><li>Lead formation the technical committee: in collaboration with DRC and directorate of labor and social affairs, lead forming the technical committee for review process, data and input collection from the technical committee and updating the solar panel curriculum.</li><li>Update curricula content, ensure it meets competency-based education standards : the consultant will be responsible in updating a well-structured competency-based curriculum that clearly defines the learning outcomes in terms of skills, knowledge and measurable and practical objective is stated within the curriculum, as well as a flexible curriculum allowing in house updates based on market changes. The consultant will ensure receiving feedback from the technical committee and refine the curriculum accordingly.</li><li>Prepare the final version of the training package: in collaboration with the technical committee, the consultant will receive feedback from them, refine and finalize the training curriculum. The final product must include the trainer guide, detailed lesson plan, competency-based training manual, assessments, tools and handouts.</li><li>Submit a final consultancy report: at the end, the consultant will submit a detailed comprehensive report to DRC stating the entire process, key findings, curriculum update progress and recommendations for future updates.</li></ul><p>The Consultant will submit the following deliverables:</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Ability to travel and work inside Kurdistan Region of Iraq.</li><li>The lead consultants/team members should have minimum master s degree in development or humanitarian studies, political science, business management, economics, or other relevant fields.</li><li>Proven experience in conducting similar work/consultancies of developing vocational training curriculum for vocational training centres including government VTCs.</li><li>Proven understanding of labor market trends and vocational training principles.</li><li>Proven experience in conducting needs assessment, labor market studies and/or skill gap analyses.</li><li>Good understanding of humanitarian programs to support refugees, IDPs and host community populations with inclusion consideration.</li><li>Excellent communication, facilitation and interpersonal skills and cultural sensitivity.</li><li>Advanced skills in research design and methods, including data collection and analysis.</li><li>Written and spoken fluency in Kurdish and English.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><strong>Alternative Channel Lead</strong></p><br> <p>Business Development <br>Baghdad, Iraq</p><br><p>Are you ready to shape a new frontier in obesity care by unlocking the potential of aesthetic clinics, beauty, and cosmetic channels? Do you thrive at the intersection of commercial ambition and credible clinical engagement? If so, this is your opportunity to pioneer a fast-growing channel strategy for Novo Nordisk in Iraq.</p><br> <p><strong>Your new role</strong><br>As Alternative Channel Lead, you will drive business growth within aesthetic clinics, beauty clinics, cosmetics, and other alternative channel accounts across the Iraq market. You will combine a sharp commercial and marketing mindset with the ability to engage credibly with medical and clinical stakeholders – building and executing channel strategies that expand our presence and partnerships in obesity management.</p><br> <p>Your day-to-day responsibilities will include:</p><br> <ul> <li>Developing and implementing channel strategies tailored to aesthetic clinics, beauty clinics, cosmetics, and other alternative channel accounts.</li> <li>Identifying, onboarding, and managing key accounts and partners within the alternative channel in Iraq.</li> <li>Building strong, credible relationships with clinic owners, practitioners, and decision-makers to maximise business opportunities.</li> <li>Designing and executing marketing initiatives and campaigns tailored to the aesthetic and cosmetic wellness audience.</li> <li>Monitoring market trends, competitor activities, and customer needs to inform business decisions.</li> <li>Collaborating closely with marketing, sales, and medical teams to deliver tailored solutions and campaigns.</li> <li>Tracking and reporting on channel performance, while ensuring compliance with company policies, industry regulations, and ethical standards.</li> <li>This role involves high mobility across the Iraq market.</li> </ul> <p><strong>Your new department</strong><br>As part of International Operations, you will join our largest operational unit. Covering 194 countries and 95% of the world's population, more than 18,000 of us work passionately to serve 35 million patients each day. With a promise to outperform the competition, we continue to be the growth driver for Novo Nordisk, and to improve health at scale across the globe.</p><br> <p>Within our Iraq affiliate, you will join the Business Development &amp; Strategy department – a commercially driven team focused on opening new pathways to reach people living with obesity. Here, you will play a pivotal role in shaping how Novo Nordisk engages with non-traditional channels, working alongside marketing, sales, and medical colleagues to bring innovative partnerships to life.</p><br> <p><strong>Your skills &amp; qualifications</strong><br>We are looking for an entrepreneurial and commercially minded professional who can navigate both clinical and consumer environments with credibility. To succeed in this role, you will bring:</p><br> <ul> <li>A Bachelor's degree, with a medical background required.</li> <li>A minimum of 2 years' experience in channel management, sales, business development, or marketing – preferably within the aesthetics, cosmetics, or wellness industry.</li> <li>An FMCG mindset – commercially driven, fast-paced, and results-focused – with a strong understanding of the aesthetic clinic and cosmetic wellness market landscape in Iraq.</li> <li>Excellent communication, negotiation, and relationship-building skills, combined with the ability to analyse data, identify trends, and develop actionable strategies.</li> <li>A results-oriented, proactive, and entrepreneurial approach.</li> <li>Fluency in Arabic and English.</li> </ul> <p><strong>Working at Novo Nordisk</strong><br>At Novo Nordisk, we are not chasing quick fixes – we are creating lasting change for long-term health. For over 100 years, we have been driven by a single purpose: to defeat serious chronic diseases and help millions of people live healthier lives. In International Operations, that ambition takes on a special meaning as we expand access to treatment for millions who have been left on the sidelines. We are redefining our market, tackling complexity as one team, and surrounding ourselves with driven, talented colleagues who push each other to go further. When you join us, you become part of something bigger – a legacy of impact that reaches far beyond today.</p><br> <p><strong>What we offer</strong><br>There is, of course, more on offer here than the uniqueness of our culture and the extraordinary results we produce. Being part of a global healthcare company means opportunities to learn and develop are all around us, while our benefits are designed with your career and life stage in mind.</p><br> <p><strong>Deadline</strong><br>30 July 2026. (Applications are reviewed on an ongoing basis).</p><br><p><span><span><span>We commit to an inclusive recruitment process and equality of opportunity for all our job applicants.</span></span></span></p><br> <p><span><span><span>At Novo Nordisk, we're not chasing quick fixes – we're creating lasting change for long-term health. For over 100 years, we've been driven by a single purpose: to defeat serious chronic diseases and help millions of people live healthier lives. This dedication fuels our constant curiosity and inspires us to push the boundaries of what's possible in healthcare. We embrace diverse perspectives, seek out bold ideas, and build partnerships rooted in shared purpose. Together, we're making healthcare more accessible, treating and preventing diseases, and pioneering solutions that create change spanning generations. When you join us, you become part of something bigger – a legacy of impact that reaches far beyond today.</span></span></span></p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><b>Job Summary</b> <br> </span><p>We are looking for an experienced <strong>Head of Financial Crime Compliance (FCC)</strong> to lead FCC oversight for our Iraq Branch. The role will be responsible for managing financial crime risks across <strong>AML, Sanctions, Anti-Bribery &amp; Corruption, and Fraud</strong>, while ensuring strong governance, regulatory alignment, and effective implementation of Group FCC policies and standards.</p><br><br> <p>The successful candidate will provide advisory support to senior stakeholders, oversee risk assessments, investigations, remediation actions and regulatory reporting.&nbsp;<br>This role requires strong knowledge of FCC frameworks, regulatory expectations, client screening, transaction monitoring, CDD, and case management</p><br><br> <br><b>Key Responsibilities</b> <br><ul> <li><span>Lead and oversee FCC for Iraq, ensuring appropriate controls, governance, policies, processes, and regulatory alignment are in place. </span></li> <li><span>Provide FCC advisory support across AML, Sanctions, ABC and Fraud, including interpretation of regulatory requirements and escalation of key issues where needed. </span></li> <li><span>Manage financial crime risk through risk assessments, surveillance, investigations oversight, case quality, remediation tracking, and reporting to senior management/regulators. </span></li> <li><span>Act as Lead for Iraq, overseeing implementation of Group Policy, training, risk assessment, MI review, audit findings and treatment plans. </span></li> <li><span>Support regulatory engagement, governance forums, FCC reporting, control improvements, and change/project initiatives related to FCC objectives.</span></li> </ul><br><b>Skills and Experience</b> <br><ul> <li>Strong analytical and investigative skills.</li> <li>Stakeholder management and negotiation skills.</li> <li>Ability to collaborate, make sound decisions, manage ambiguity, give clarity, and operate with a strategic mindset.</li> </ul><br><b>Qualifications</b> <br><ul> <li>Bachelor’s degree</li> <li>Professional FCC certification such as ICA, CAMS or CFCS.</li> <li>Bilingual Arabic and English capability.</li> <li>Strong knowledge of FCC risk .</li> <li>30 years old and above (CB requirement)</li> <li>75 hours of training completed.</li> </ul><br><b>About Standard Chartered</b> <br><p>We're an international bank, nimble enough to act, big enough for impact. For more than 170 years, we've worked to make a positive difference for our clients, communities, and each other. We question the status quo, love a challenge and enjoy finding new opportunities to grow and do better than before. If you're looking for a career with purpose and you want to work for a bank making a difference, we want to hear from you. You can count on us to celebrate your unique talents and we can't wait to see the talents you can bring us.</p><br><br> <p>Our purpose, to drive commerce and prosperity through our unique diversity, together with our brand promise, to be here for good are achieved by how we each live our valued behaviours. When you work with us, you'll see how we value difference and advocate inclusion.</p><br><br> <p>Together we:</p><br><br> <ul> <li><b>Do the right thing</b>&nbsp;and are assertive, challenge one another, and live with integrity, while putting the client at the heart of what we do</li> <li><b>Never settle,</b>&nbsp;continuously striving to improve and innovate, keeping things simple and learning from doing well, and not so well</li> <li><b>Are better together,</b>&nbsp;we can be ourselves, be inclusive, see more good in others, and work collectively to build for the long term</li> </ul><br><b>What we offer</b> <br><p><b>In line with our Fair Pay Charter,</b>&nbsp;we offer a competitive salary and benefits to support your mental, physical, financial and social wellbeing.</p><br><br> <ul> <li><b>Core bank funding for retirement savings, medical and life insurance,</b>&nbsp;with flexible and voluntary benefits available in some locations.</li> <li><b>Time-off</b>&nbsp;including annual leave, parental/maternity (20 weeks), sabbatical (12 months maximum) and volunteering leave (3 days), along with minimum global standards for annual and public holiday, which is combined to 30 days minimum.</li> <li><b>Flexible working</b>&nbsp;options based around home and office locations, with flexible working patterns.</li> <li><b>Proactive wellbeing support</b>&nbsp;through Unmind, a market-leading digital wellbeing platform, development courses for resilience and other human skills,&nbsp;global Employee Assistance Programme, sick leave, mental health first-aiders and all sorts of self-help toolkits</li> <li><b>A continuous learning culture</b>&nbsp;to support your growth, with opportunities to reskill and upskill and access to physical, virtual and digital learning.</li> <li><b>Being part of an inclusive and values driven organisation,</b>&nbsp;one that embraces and celebrates our unique diversity, across our teams, business functions and geographies - everyone feels respected and can realise their full potential.</li> </ul><br> </div>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Technology Development Associate</h4> <p><strong>Entry-level | Iraqi nationals | Majnoon Oil Field, Basrah</strong></p> <h4>Role details</h4> <p><strong>Department:</strong> Information Technology<br> <strong>Location:</strong> Majnoon Oil Field, Basrah, Iraq<br> <strong>Eligibility:</strong> Iraqi nationals only<br> <strong>Work pattern:</strong> 5/2 daily commuter<br> <strong>Reports to:</strong> Technology Development Supervisor</p> <h4>About the role</h4> <p>KBR is seeking motivated Iraqi national graduates to join the IFMS project at Majnoon Oil Field as Technology Development Associates. This is an entry-level position that provides a structured development pathway into the disciplines of Information Management (IM), Information Technology (IT), Digital Solutions, Cyber Security, Applications, Data Management, Operational Technology, and SAP.</p> <p>The role is designed for early-career graduates who demonstrate strong potential, a willingness to learn, and a commitment to building a long-term career in the oil and gas sector. You will follow a customized development plan combining formal training, on-the-job experience, mentoring, and practical project assignments, with the aim of progressing into specialist or technical roles upon successful completion of the program.</p> <h4>Key responsibilities</h4> <ul> <li>Participate in a structured graduate development and rotational training program across relevant technology disciplines</li> <li>Support daily activities within assigned teams including IM, IT, Cyber Security, Digital Solutions, SAP, Data Management, and Operational Technology</li> <li>Assist experienced professionals with project, operational, and end-user support activities</li> <li>Complete assigned technical, business, and professional development courses</li> <li>Contribute to data collection, analysis, reporting, and documentation tasks</li> <li>Participate in workshops, mentoring sessions, and knowledge-sharing activities</li> <li>Support technology adoption, user engagement, and continuous improvement initiatives</li> <li>Develop an understanding of oil and gas business processes and the technologies that support them</li> <li>Demonstrate commitment to HSE standards, company policies, and professional conduct at all times</li> </ul> <h4>What we are looking for</h4> <p>We are recruiting on potential, not experience. The following attributes define the candidate we want:</p> <ul> <li>Strong written and verbal communication skills in English</li> <li>Positive, professional attitude with high levels of motivation and enthusiasm</li> <li>Intellectual curiosity and a genuine desire to learn</li> <li>Strong interpersonal and teamwork capabilities</li> <li>Good organizational and time management skills</li> <li>Ability to adapt to changing priorities in a dynamic field environment</li> <li>Commitment to personal growth and continuous professional development</li> <li>Desire to build a long-term career within Iraq's energy sector</li> </ul> <h4>Qualifications & requirements</h4> <p><strong>Education</strong><br> Bachelor's degree from an accredited institution — recent graduates encouraged to apply<br> Relevant disciplines include: Information Technology, Computer Science, Information Systems, Engineering, Data Science, Business Information Systems, Electronics, Telecommunications, Cyber Security, or Business English / Communications</p> <p><strong>Language</strong><br> English: Good written and verbal communication required<br> Arabic: Native</p> <p><strong>Technical skills</strong><br> Basic familiarity with Microsoft Office 365, computer hardware/software, and digital tools<br> General awareness of IT, data, or cyber security concepts is advantageous — training will be provided</p> <p><strong>Advantageous certifications (not mandatory)</strong><br> Microsoft Fundamentals, ITIL Foundation, Cisco Networking Fundamentals, Cyber Security Fundamentals, Cloud Fundamentals (Azure / AWS), Data Analytics Fundamentals, or any recognized technology certification</p> <h4>Career development</h4> <p>Upon successful completion of the program, associates may progress into specialist roles such as IT Support Specialist, Information Management Specialist, SAP Support Analyst, Cyber Security Analyst, Digital Solutions Coordinator, Data Analyst, Infrastructure Support Engineer, or Applications Support Analyst — aligned to individual aptitude and business requirements.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Instrument &amp; Controls Lead Engineer<br><br><p><b>Instrument &amp; Controls Lead Engineer</b></p><br><br><p>ECSS40 - Principal Specialist, Commissioning</p><br><br><p>Rotation: 28/28</p><br><br><br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><p>We are looking for an Instrument &amp; Controls (I&amp;C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument &amp; Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&amp;C Engineers as direct reports.</p><br><br><br><p><b>Responsibilities: </b></p><br><br><ul><li>Production Delivery, Optimisation &amp; Excellent Performance</li><li>Responsible for day-to-day optimization of I&amp;C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li><li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.</li><li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed and managed via operational risk assessment processes.</li><li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&amp;C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li><li>Prioritize I&amp;C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li><li>Actively lead Continuous Improvement projects involving instrumentation, automation, and control systems; promote CI philosophy and engage site teams to drive improvement initiatives.</li></ul><p><b>Qualifications:</b></p><br><br><ul><li>Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)  Technical degree in Engineering or relevant engineering subject.</li><li>Experience in previous asset engineering / operations engineering role  Practical exposure to production facilities.</li><li>Excellent communication, interpersonal and coaching skills  Strong bias for being proactive and getting results.</li><li>Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.</li><li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li><li>Skilled in behaviour change management Not essential but preferable:  Professional (Chartered) Engineer.</li><li>Experience in roles in culturally and linguistically diverse working environments</li></ul><br><p><b>Preferred Qualifications:</b></p><br><br><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Deputy finance manager – IFMS contract (Majnoon oil field)</h4> <h4>Position overview</h4> <p>Located at the Majnoon Oil Field in Iraq, this role is responsible for leading overall controller and cost recovery functions for KBR on the Integrated Field Management Service (IFMS) Contract. The F&A Manager ensures timely and accurate financial transactions review, invoice generation, and optimized cash flow.</p> <p>The role ensures robust financial governance, accurate reporting, and strong compliance with internal controls and contractual obligations.</p> <h4>Key responsibilities</h4> <p><strong>Cost recovery process</strong><br> Oversee cost recovery operations.<br> Hold overall responsibility for the end-to-end cost recovery process, including management of payments and collections.<br> Ensure client billings are accurate, timely and compliant with the contract.<br> Manage working capital.</p> <p><strong>Risk management & assurance</strong><br> Supervise risk management and assurance operations.<br> Lead financial risk management activities.<br> Conduct policy and compliance audits.<br> Ensure external compliance.<br> Drive internal reviews and audits.<br> Strengthen control systems.</p> <p><strong>Internal reporting</strong><br> Oversee accounting operations and ensure accurate financial reporting.<br> Manage monthly and quarterly close processes.<br> Monitor financial performance and provide analysis.<br> Ensure integrity of financial records.<br> Lead the development of annual budgets and multi-year plans.</p> <p><strong>Team leadership / development</strong><br> Lead, manage and develop a team of approximately 30 people.</p> <h4>Qualifications & experience</h4> <p>Bachelor’s degree required; a professional accounting certification is preferred.<br> Minimum 10 years of finance experience, ideally within the oil & gas or energy sector.<br> Leadership experience.<br> Experience working in remote site environments or large upstream projects is beneficial.<br> Strong communication skills with ability to influence non-financial stakeholders.</p></p><p></p>