وظائف مهندسين الكتروميكانيكال

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Mechanical Engineer<br><br><span><u><b>Lead Mechanical Engineer</b></u></span><b>EFLD35 - Principal Technical Professional - Field Engineering</b><br>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.<b><u>Responsibilities:</u> </b>• Day to day delivery of Mechanical Engineering support for site operations.• Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.• Collaborates with Central Engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.• Promotes a culture of open safety reporting and continuous improvement.• Provides immediate front line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team.• Ensures asset Mechanical Engineering risks (both static and rotating) are understood, controlled, managed and reduced.• Participates in a variety of asset and project risk assessments• Input into anomaly assessment and resolution plans.• Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all Safe Operating Limit excursions.• Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.• Provides Mechanical support to technical MoCs and Engineering Queries• Acts as technical interface with Projects and Modifications organisation, including development of Statement of Requirements (SOR) and Project Initiation Requests (PIRs) and Decision Support Packages (DSP)• Supports delivery of Production Efficiency Improvement and Defect Elimination processes (including simple investigations for deferrals and vulnerabilities)• Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.• Performs follow-up actions and observations from self-verification checks that are related to Mechanical Engineering• Participates in Start Up Readiness and Assurance Reviews• Provides coaching to junior engineers.<br><u><b>Experience, Qualifications &amp; Key Skills</b></u>• Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)• Professional (Chartered) Engineer Preferred• Technical degree in Mechanical Engineering or allied engineering subject.• Experience in previous asset engineering / operations support engineering role• Practical exposure to production facilities• Excellent communication, interpersonal and coaching skills• Strong bias for being proactive and getting results• Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.• Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results• Skilled in behavior change management<br><u><b>Preferred Qualifications:</b></u><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Duty Engineer you are responsible for all the mechanical and technical maintenance and HVAC equipment within your property and your role will include key responsibilities such as:<br><br>• Supervise and control the preventive maintenance schedule<br>• Be responsible for the health safety of the property<br>• Follow the preventive maintenance chart strictly and maintain records for future reference<br>• Coordinate with other department’s counterparts to ensure their satisfaction on quality and progress<br>• Create departmental training programmes among engineering employees and create opportunities to multitask<br>• Distribute the work to subordinates accordingly to their capabilities in order to get the best results to the specified standards</p> </div>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design, install, commission, and maintain chilled &amp; frozen refrigeration systems ✅ Diagnose and resolve refrigeration system faults and technical issues ✅ Perform preventive and corrective maintenance to ensure optimal performance ✅ Monitor system efficiency and recommend energy-saving improvements ✅ Ensure compliance with safety regulations and industry standards ✅ Coordinate with clients, contractors, and project teams ✅ Prepare maintenance reports and technical documentation</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>✔ Bachelor's Degree/Diploma in Mechanical Engineering, Refrigeration Engineering, or a related field ✔ Proven experience with commercial or industrial chilled &amp; frozen refrigeration systems ✔ Strong knowledge of compressors, condensers, evaporators, cold rooms, and refrigeration controls ✔ Experience with ammonia (NH₃) and/or Freon-based systems is an advantage ✔ Ability to read technical drawings and troubleshoot complex refrigeration systems</p><p></p></section>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;<br> &nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;</p><br><p><i><strong>#Wood #Iraq #Basra #Senior Commissioning Engineer&nbsp;</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Senior Commissioning Engineer&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production.&nbsp;</p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities.&nbsp;</p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives/Project context:</u></strong></p><br><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul> <li><strong>Monitoring &amp; driving</strong>: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</li> <li><strong>Acceleration</strong>: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</li> <li><strong>Methodology</strong>: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</li> <li><strong>Documentation</strong>: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</li> <li><strong>Coordination</strong>: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</li> <li><strong>Reporting</strong>: Run daily and weekly review meetings with Construction, CSU and Company Representative.</li> <li><strong>Handover</strong>: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.<br> &nbsp;</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</li></ul><p><strong>Experience:</strong></p><br><ul> <li><strong>Experience</strong>: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</li> <li><strong>Projects</strong>: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</li> <li><strong>Methodology</strong>: knowledge of OPERCOM and Orbit is a plus.</li> <li><strong>Environment</strong>: Previous experience working for a major international operator and managing multi-discipline contractors.</li></ul><p><strong>Technical Skills:</strong></p><br><ul> <li>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</li> <li>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</li> <li>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</li> <li>Proficiency with completion management tools (ICAPS or equivalent).</li></ul><p><strong>Personal Qualities:</strong></p><br><ul> <li><strong>Leadership</strong>: Ability to challenge contractors and enforce priorities.</li> <li><strong>Adaptability:</strong> Comfort in fast-track, multicultural and high-pressure environments.</li> <li><strong>Rigor</strong>: Strong reporting discipline, documentation rigor and clear communication.</li> <li><strong>Diplomacy</strong>: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</li></ul><p><strong>Languages:</strong></p><br><ul> <li>Fluent professional English (mandatory).</li> <li>French appreciated. Arabic is a plus.</li></ul><p><strong>Conditions:</strong></p><br><ul> <li>Site-based assignment in Iraq, Rotational.</li></ul> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Support the team member of HSE team to prepare deliverable HSE documents such as HSE Plan and other relevant procedures for Project execution.</p><p>Support the HSE team leader for project Proposals in mostly overseas. Review &amp; prepares pre-qualification response to questionnaires documents from the client, ITB (Instruction to Bidder) review, and summary at the proposal stage. Prepare HSE documentation for clients/projects as per the requirements Support in providing training to HSE team member in project PQ (Project Pre-Qualification) and Project Proposal handling including Project Execution set up concerning Project HSE Management. Develop, implement and improve HSE management systems, processes and procedures to support business operations in accordance with ISO 45001 Develop HSE Alert &amp; HSE Risk Assessment for overseas project sites safety awareness Prepares weekly, quarterly, annual and other HSE related report covering the overseas project sites HSE activities. Support overseas projects with the identification of environmental aspects and determining the project objectives and target Carryout HSE training courses when required</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Knowledge And Qualifiction</h2><p>Degree holder in Engineering preferably major in Safety or Mechanical, Civil, Electrical, Industrial or Chemical</p><p>At least Ten (10) years experienced in field as an HSE engineer</p><p>At least Two (2) years experienced in PQ/ITB Document Process</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Applying and following the client contractual QHSE obligations, PSGS’ QHSE policy and procedures.</p><p>• Maintaining the integrity of the ISO Management Documentation System and standards of ISO 9001, ISO 14001, ISO 22000, &amp; ISO 45001.</p><p>• Maintaining, repairing and installing plumbing and related fixtures and components, as well as appliances and trims.</p><p>• Repairing piping of various sizes and types.</p><p>• Checking safety equipment and replacing components such as washers, gaskets and filters.</p><p>• Inspecting, repairing or replacing pumps, valves and boiler systems.</p><p>• Monitoring work done by outside contractors for adherence to Plumbing Code Requirements and reporting back to direct manager.</p><p>• Installing supports and hangers for pipes, fixtures and equipment.</p><p>• Assembling and installing valves and fittings.</p><p>• Installing, repairing and maintaining water treatment equipment, piping and controls.</p><p>• Testing pipe systems and fixtures for leaks.</p><p>• Ensuring all installations, repairing and maintenance meet the requirements of the appropriate codes.</p><p>• Maintaining good relationship with the client to accomplish ongoing tasks in a timely manner.</p><p>• Ensuring all installations, repairs and maintenance meet environmental protection requirements.</p><p>• Maintaining appropriate service and repair records.</p><p>• Performing preventive/corrective maintenance and call-off activities on daily, weekly and monthly basis and ensuring that the company avoids any liquidated damages.</p><p>• Controlling the inventory for related equipment parts and supplies.</p><p>• Preparing Permit to Work and daily/weekly/monthly reports and sharing them with the management.</p><p>• Preparing estimation for call-off works and sharing it with the management.</p><p>• Coordinating with the client on regular basis for related works and assisting in completing the third-party request.</p><p>• Performing other duties as directed.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>·&nbsp;&nbsp;&nbsp;Diploma in Mechanical or Trade Certificate or a similar discipline</p><p>·&nbsp;&nbsp;&nbsp;5+ years in a similar role, Middle East experience preferred</p><p>·&nbsp;&nbsp;&nbsp;Must understand regulatory compliance and be able to maintain and submit any documentation required</p><p>·&nbsp;&nbsp;&nbsp;Fluent in English, Arabic is an added value</p><p>·&nbsp;&nbsp;&nbsp;Computer literate</p><p><br></p></div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> We are supporting a leading international Oil &amp; Gas company in to hire an experienced <strong>Project Completion Lead Engineer.</strong><br> This is a unique opportunity to contribute to a high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br> NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process.<br> <strong>Job Description</strong><ul><li><strong>Role- Project Completion Lead Engineer.</strong></li><li><strong>Location: Al-Anbar Governate, Iraq </strong></li><li><strong>Work Pattern: Rotation– 6 weeks on 3 weeks off</strong></li><li><strong>Daily pay rate </strong></li><li><strong>Verbal and written communication in English is mandatory</strong></li></ul><strong>Why This Opportunity Stands Out</strong><ul><li>End-to-End Project Ownership</li><li>Strategic Impact on Project Success</li><li>Specialized Expertise in CCMS</li><li>Cross-Functional Leadership Exposure</li><li>Data &amp; Digital Systems Leadership</li><li>High Responsibility in Final Project Delivery</li></ul><strong>Must-Have Requirements</strong><br> 10–15 years of experience in:<ul><li>Project completions</li><li>Commissioning systems</li><li>Database management (CCMS/Maximo)</li></ul>Engineering Degree or Diploma (Mechanical / Electrical / Instrumentation / relevant discipline)<br> <br> <strong>Why Apply Through NES?</strong><br> NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br> 80+ offices across 45 countries<br> 24,000+ contractors globally and 10,000+ in the Middle East<br> Strong regional presence and long-term client partnerships<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Job Description </b><div> <p> <strong>Role Summary</strong> </p> <p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p> <p> <strong>What s On Your Plate?</strong> </p> <p> <strong>Expansion &amp; Layout Development:</strong> </p> <ul> <li> <p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p> </li> <li> <p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p> </li> </ul> <p> </p> <p> <strong>Procurement &amp; Technical Documentation:</strong> </p> <ul> <li> <p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p> </li> <li> <p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p> </li> </ul> <p> </p> <p> <strong>Facilities Maintenance &amp; Contractor Supervision:</strong> </p> <ul> <li> <p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p> </li> <li> <p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p> </li> <li> <p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p> </li> <li> <p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p></li></ul></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Qualifications </p><div> <ul> <li> <p> <strong>Education &amp; Experience: </strong>Diploma or Bachelor s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1 2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p> </li> <li> <p> <strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs.</p> </li> <li> <p> <strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p> </li> <li> <p> <strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p></li></ul></div><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior CWI Engineer<br><br>Position Details<ul><li>Position Title: CWI Senior Engineer</li><li>Department: Wells</li><li>Location: Majnoon Oil Field – Basra, Iraq</li><li>Reports to: CWI Engineering Team Lead</li><li>Direct Reports: None</li></ul>1. Role Purpose<p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p><br><br>2. Key ResponsibilitiesHSSE &amp; Well Integrity<ul><li>Champion a proactive safety culture with Zero Harm.</li><li>Conduct site safety visits, audits, and toolbox talk reviews.</li><li>Ensure compliance with well integrity standards such as NORSOK D‑010</li><li>Ensure engineering designs comply with HSSE policies, Life-Saving Rules, and well integrity guidelines.</li><li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li><li>Support incident investigations by providing technical analysis and recommendations.</li></ul>Program Development &amp; Technical Assurance<ul><li>Prepare and review Completion Programs, Workover Programs, and Intervention Procedures.</li><li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li><li>Ensure engineering designs comply with well integrity standards and operational requirements.</li><li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li></ul>Operational Support &amp; Problem Solving<ul><li>Provide real-time engineering support to wellsite supervisors during operations.</li><li>Analyze operational challenges and propose technical solutions.</li><li>Perform pre-job and post-job reviews to ensure procedural compliance.</li><li>Support SIMOPS planning and coordination with Production, Subsurface, and Drilling teams.</li></ul>Cost &amp; Schedule Control<ul><li>Support development of budgets, forecasts, and AFE inputs.</li><li>Monitor job efficiency, performance, and operational KPIs.</li><li>Identify cost‑saving opportunities without compromising safety or quality.</li></ul>Contractor &amp; Performance Management<ul><li>Lead technical interface with service companies and contractors.</li><li>Evaluate technical proposals, equipment specifications, and new technologies.</li><li>Support tendering, technical evaluations, scopes of work, and contract management.</li><li>Monitor service quality and ensure alignment with engineering requirements.</li></ul>Reporting &amp; Governance<ul><li>Review technical proposals from service companies and ensure alignment with operational requirements.</li><li>Participate in contractor performance reviews and technical evaluations.</li><li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li></ul>3. Qualifications &amp; Experience<ul><li>Bachelor’s degree in Petroleum, Mechanical, or related Engineering discipline.</li><li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li><li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li><li>Strong experience leading CWI engineering teams in high‑activity onshore fields.</li><li>Comprehensive understanding of well integrity standards (e.g., NORSOK D‑010), well control, and barrier management.</li><li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li><li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li><li>Experience in Iraq/Majnoon preferred.</li><li>Fluency in English; Arabic is an advantage.</li></ul>4. Core Competencies<ul><li>CWI Technical Mastery</li><li>Well Integrity &amp; Risk Management</li><li>Engineering &amp; HSSE Leadership</li><li>Performance Management &amp; Continuous Improvement</li><li>Cross‑Functional Collaboration</li><li>Contractor &amp; Stakeholder Management</li><li>Communication &amp; Technical Reporting</li></ul><br><p>Approved By: Steven Hendry</p><br><br><br><p>Position: Wells Manager</p><br><br><br><p>Date: 03 Mar 2026</p><br><br><br><br><br> </div>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>