وظائف براد مواسير - البصره العراق

<p>A pipefitter attaches pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. Pipefitters measure and mark pipes for cutting, threading and welding. They use specific tools such as saws, cutting torches, pipe threaders, benders, and welders.</p><p>1) Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. 2) Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.</p><p><strong>Desired Candidate Profile</strong></p><p>1) Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. 2) Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.</p>

<p>Placing the tank Making necessary pipe connections Building a platform for the tank</p><p><strong>Desired Candidate Profile</strong></p><p>Placing the tank Making necessary pipe connections Building a platform for the tank</p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Key responsibilities</h4> <ul> <li>Develop civil and structural bill of material.</li> <li>Prepare layouts and detail drawings.</li> <li>Create civil grading and roadway models using Civil 3D and prepare 2D drawing packages from the design models.</li> <li>Collaborate with other disciplines and the project engineering team for structural design requirements.</li> <li>3D modeling of RCC foundations, piles, pile caps.</li> <li>Extraction of GA drawings. Development of RCC details, base plate and anchor bolts.</li> <li>3D modeling, drawing extractions and development of structural steel details, pipe racks, technological structures, shelters, grade mounted platforms, vessel mounted platforms, pipe supports, equipment foundations, roads and drains.</li> <li>Perform calculations and layouts including 2D and 3D models with adequate dimensions necessary to assist the engineering disciplines and fabrication/construction personnel including preparation of topographic layouts, earthworks/excavation drawings, boreholes locations, fencing, paved roads and drainage, underground piping and foundations, architectural and conceptual building drawings, control room layouts, substation layouts, machinery shelters, service platforms, pipe racks, pump foundations, vessel and vessel platform foundations, columns and other civil/structural drawings.</li> <li>Perform layout clash/interface checks, identify conflicts, take corrective action in coordination with other engineering discipline inputs.</li> <li>Issue engineering drawings and layouts for inter-discipline checks (IDCs), coordinate with other engineering disciplines in the integration of technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. Consult and make recommendations to engineers on feasibility of design plans and layouts.</li> <li>Estimation and preparation of material take-offs (MTOs), review vendor drawings, ensure vendor specifications are in full compliance with contract/project requirements.</li> <li>Prepare red-line markups, resolution of site queries from construction and fabrication shop queries / TQs. Preparation of detail sketches to support resolution of site and fabrication queries. Updating of 3D model.</li> <li>Prepare “as-built” drawings following completion of construction activities.</li> </ul> <h4>Essential qualifications and skills</h4> <ul> <li>10 years’ experience.</li> <li>Must have proficiency in AutoCAD and Navisworks software.</li> <li>Experience supervising small teams.</li> </ul></p><p></p>

<p><h4>Job purpose</h4> <p>To maintain, repair HVAC system in process area. Perform preventive and shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. heating, ventilation, air conditioning systems in Majnoon.</p> <h4>Duties and responsibilities</h4> <ul> <li>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</li> <li>Troubleshoot issues with industrial HVAC system.</li> <li>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</li> <li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradley etc.</li> <li>Troubleshoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</li> <li>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines.</li> <li>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls.</li> <li>Operate a variety of hand and power tools, brazing torch, vacuum pump, test equipment utilized.</li> <li>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</li> <li>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</li> <li>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments.</li> <li>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>University degree in related discipline.</li> <li>8-10 years’ experience of HVAC system and AC units within a large industrial plant, preferably in the oil and gas industry.</li> <li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li> <li>Proficient in reading schematics and work plans.</li> <li>Computer and software skills: <ul> <li>Excel – advanced</li> <li>Word – intermediate</li> <li>PowerPoint – intermediate</li> </ul> </li> <li>Intermediate proficiency in English verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Knowledge of materials, methods and tools used in the operation and repair of HVAC.</li> <li>Knowledge of welding and soldering techniques.</li> <li>Proper methods of storing equipment.</li> <li>Aware about PTW system and working in oil field.</li> <li>Have IT skills (Excel, PowerPoint, Microsoft Office, SharePoint etc.).</li> <li>Communicate effectively both orally and in writing.</li> <li>Work cooperatively with others.</li> <li>Work independently with little direction.</li> <li>Meet schedules and timelines.</li> <li>Maintain routine records and prepare reports.</li> </ul></p><p></p>

<p><h4>Job purpose</h4> <p>To maintain, repair HVAC system in process area. Perform preventive and shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. heating, ventilation, air conditioning systems in Majnoon.</p> <h4>Duties and responsibilities</h4> <ul> <li>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</li> <li>Troubleshoot issues with industrial HVAC system.</li> <li>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</li> <li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradley etc.</li> <li>Troubleshoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</li> <li>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines.</li> <li>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls.</li> <li>Operate a variety of hand and power tools, brazing torch, vacuum pump, test equipment utilized.</li> <li>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</li> <li>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</li> <li>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments.</li> <li>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>University degree in related discipline.</li> <li>8-10 years’ experience of HVAC system and AC units within a large industrial plant, preferably in the oil and gas industry.</li> <li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li> <li>Proficient in reading schematics and work plans.</li> <li>Computer and software skills: <ul> <li>Excel – advanced</li> <li>Word – intermediate</li> <li>PowerPoint – intermediate</li> </ul> </li> <li>Intermediate proficiency in English verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Knowledge of materials, methods and tools used in the operation and repair of HVAC.</li> <li>Knowledge of welding and soldering techniques.</li> <li>Proper methods of storing equipment.</li> <li>Aware about PTW system and working in oil field.</li> <li>Have IT skills (Excel, PowerPoint, Microsoft Office, SharePoint etc.).</li> <li>Communicate effectively both orally and in writing.</li> <li>Work cooperatively with others.</li> <li>Work independently with little direction.</li> <li>Meet schedules and timelines.</li> <li>Maintain routine records and prepare reports.</li> </ul></p><p></p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p>A. Welding Engineering & Procedure Control • Develop, review, and qualify WPS/PQRs in accordance with project requirements and code standards. • Manage Welder and Welding Operator Performance Qualification (WPQ) and continuity records. • Prepare Weld Maps, Welding Sequence Plans, and Technical Queries (TQs) for design discrepancies. B. Quality Assurance & NDT Control • Lead and supervise the QA/QC team; review and approve Inspection & Test Plans (ITPs) and NDT procedures (RT, UT, MT, PT). • Perform Root Cause Analysis (RCA) of welding failures and NCRs, and propose technical solutions to improve weld quality and productivity. • Interpret radiographic films (RTFI) and witness NDT activities on-site. C. Cross-Country Pipeline Specific Inspection & Execution (??????) • Perform comprehensive pipeline construction inspections along the Right-of-Way (ROW), strictly following API 1104, ASME B31.4/B31.8, and project specifications. • Conduct pre-weld inspections for pipe bevel preparation, root gap, fit-up tolerances, and alignment prior to the root pass. • Supervise field automatic/semi-automatic pipeline welding (GMAW/FCAW) used for large-diameter cross-country lines. • Monitor and verify pre-heat, inter-pass temperatures, and heat input across the pipeline spread to prevent hydrogen cracking. • Coordinate daily NDT activities along the pipeline (RT/AUT), ensuring timely defect identification and rectification. • Inspect field joint coating, holiday testing, and anti-corrosion systems on the girth welds. • Coordinate tie-in welding, lowering, and backfilling activities to maintain continuous construction quality. • Witness Hydrostatic Testing, pigging, and drying procedures for pipeline sections and final mechanical completion. • Maintain comprehensive pipeline weld records, NDT tracking logs, and repair registers for project audit and handover to the Client. D. Field Execution, HSE & Coordination • Provide daily technical support for on-site construction, resolving bottlenecks related to pipelines, piping, and structural work. • Liaise with clients, TPI, and subcontractors, and participate in weekly progress and quality meetings. • Ensure strict compliance with HSE policies (HAZOP, JSA) and issue Lessons Learned and quality feedback notices to the project teams.</p><p>• Minimum 15 years of extensive experience in the Oil & Gas industry, specifically in large-scale EPC projects and cross-country pipeline construction. • Proven hands-on experience in cross-country pipeline projects, including the supervision of automatic and semi-automatic welding spreads (e.g., GMAW/FCAW with Saturnax/Serimax systems), field joint coating, NDT (RT/AUT), and hydrostatic testing. • Demonstrated track record of working with major international operators such as TotalEnergies, Saudi Aramco, or equivalent in onshore pipeline and plant facilities. • Expert knowledge of applicable pipeline codes and standards: API 1104, ASME B31.4, B31.8, DNV-ST-F101, and NACE MR0175/ISO 15156. • Solid experience in field tie-in welding, in-service welding, hot tapping, and sour service environments. • In-depth understanding of pipeline pre-commissioning and commissioning procedures, including pigging and drying operations. • Proven experience in managing pipeline QA/QC data, RT film interpretation (RTFI), and final handover dossiers to meet strict client audit requirements.</p>

<p>Under the overall guidance of the Project Manager and the direct supervision of the Lead Civil Engineer, the Civil Engineer is required to perform the following specific duties and responsibilities ensuring their effectiveness, transparency, and integrity:</p> <p>Plan, supervise, and manage the implementation of rehabilitation and/or construction works, ensuring alignment with project requirements, timelines, and budgets.</p> <p>Responsible for implementation and contributing to the preparation of the bill of quantities, as-built and construction drawings, Specifications and other engineering documents.</p> <p>Responsible for day-to-day site visit of the construction works, coordination with the contractors and suppliers according to the needs and requirements on site; Inspects and report on contractor s works in progress ensuring that the contractor meets client`s quality standards and implement the contract in accordance with the regulations.</p> <p>Provide support and guidance to the contractor and assists in resolving site problems, as necessary; Assist in the preparation of project plans, detailed schedules, and progress reports, and contribute to project closure activities and documentation.</p> <p>Responsible for supervision of site technical staff and consultants assigned to the project, and the assignment and monitoring of duties during the progress of works; Liaise with relevant government authorities, beneficiaries, and stakeholders to facilitate permits, secure approvals, and maintain effective working relationships.</p> <p>Embed sustainability dimensions including social and gender inclusion, as well as Health, Safety, Security, and Environmental (HSSE) aspects into the project during the design and construction phases; Ensure PSEA measures are implemented throughout the project implementation, as per the country PSEA action plan; Perform other related duties as required by the Project Manager.</p> <p>Supervise and monitor contractors setting-out and construction activities, ensuring full compliance with contract specifications, approved work plans, and project requirements in terms of scope, timeline, and budget; Conduct daily site visits to monitor work progress, identify issues, and propose practical engineering solutions in coordination with the Project Manager and Lead Civil Engineer; Responsible for preparation of progress reports on construction activities, according to the agreed timeframe of works and submission of such on a weekly basis to the Project Manager; Assess and report on the project closing plans, archiving of cost and progress report and hand over all related reports to the Project Manager; Evaluate and assess work schedules and programmes, including the comparison with the schedule baselines and reports to the Project Manager accordingly; Check all laboratory reports, operation and maintenance manuals, and keep records and report to the Project Manager accordingly; Assess the work activities of contractor/s, measure completed work, and make recommendations to the Project Manager for progress payments to contractors.</p> <p>Carry out on-site technical inspections and assessments to ensure that all construction activities comply with client`s quality standards and approved project specifications. Maintain accurate records and compile periodic and ad hoc reports in accordance with client`s procedures and reporting requirements.</p> <p>Conduct site inspections, testing, and quantity verification, and review/approve technical submittals including shop drawings, material approvals, and as-built documentation. Maintain records, compile periodic reports and any specific reports required by client`s standard procedures; Responsible for the preparation and verification of a database for the available materials shipped to the project, schedules of labor force, and monitoring of quality of such during the progress of works; Check, verify and approve the interim payments submitted by the Contractor/s and submit detailed reports to the Project Manager.</p> <p>Maintain accurate records of site activities, inspections, incidents and progress, ensuring timely submission of reports (weekly/monthly/quarterly). Support project closure through commissioning, handover and archiving of construction documentation. Assist in compiling periodic and specific reports, and ensure all project documentation is up-to-date and properly filed. Support the Project Team in overseeing change controls, risk and issue registers, and ensure timely and accurate reporting on project progress.</p> <p>Ensure that lessons learned and challenges are documented throughout the project implementation and shared with the project team; Participate in knowledge-sharing initiatives and contributing insights and lessons learned.</p> <p>Project reporting Civil Engineer will be reporting to Lead Civil Engineer and/or Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><h3>Key competencies</h3> <p>A minimum of 2 years of experience in development and coordination within agricultural, water resources , or related projects, particularly in irrigation (Open Channels and Closed Pipe System) and water-related activities, is required. Experience in site supervision, as well as monitoring and evaluation, is required. Experience working on international and/or local projects in conflict-affected areas is preferred. Experience in implementing and delivering projects for international organizations is considered an asset. Experience in report writing, data analysis, and document drafting is desirable. Experience in Health and Safety Management is desirable. Experience in quality assurance and quality control (QA/QC) for infrastructure projects is desirable. Experience working in the southern governorates is desirable.</p> <h3>Team management</h3> <p>This role has no team management</p> <h3>Further information</h3> <p>Disclaimer: At no stage of the recruitment process will CTG ask candidates for a fee. This includes during the application stage, interview, assessment and training. CTG has a zero tolerance to Sexual Exploitation and Abuse (SEA) which is outlined in its Code of Conduct. Protection from SEA is everyone s responsibility CTG encourages all candidates applying for this advertisement to ensure that their candidate profile is up to date with up to date experience / education / contact details, as this will help you being considered further in your application for this role.</p>