وظائف مهندس تصميم ميكانيكي - البصره العراق

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p>To maintain and overhaul diesel engines of mobile and overhead cranes, welding machines, hydro-jetting machine, truck, shovels, forklift and other materials hand lining equipments. To carry out preventive maintenance of above diesel engines. Read &amp; understand the equipments operations / manual Read &amp; understand the lube oil system and perform maintenance of the hydraulics and lube oil Proven experience as a diesel heavy equipment mechanic Experience working with Deutz and Cummins engines Knowledge and experience in hydraulic systems</p><p><strong>Desired Candidate Profile</strong></p><p>12th Passed Must Know english</p>

<p>Install, maintain, troubleshoot, and repair heavy industrial electrical systems. Ensure safe and reliable operation of electrical equipment. Support preventive maintenance, breakdown maintenance, and commissioning activities.</p><p>Install, inspect, troubleshoot, and repair heavy electrical systems. Perform preventive and corrective maintenance of industrial equipment. Diagnose faults in motors, transformers, generators, MCCs, and switchgear. Carry out cable laying, termination, and panel wiring. Test electrical equipment using appropriate measuring instruments. Replace faulty electrical components and restore equipment operation. Support commissioning and startup activities. Maintain maintenance records and inspection reports. Ensure compliance with electrical safety standards and LOTO procedures. Coordinate with mechanical and production teams to minimize downtime. Maintain housekeeping and cleanliness of electrical panels and work areas. Report equipment abnormalities promptly.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 10th Pass with ITI/Diploma in Electrician, Electrical Maintenance, or Electrical Mechanic. 3 5 years of experience in heavy industrial electrical maintenance. Knowledge of AC/DC motors, transformers, generators, MCCs, switchgear, and control panels. Ability to read electrical drawings and schematics. Familiarity with multimeter, clamp meter, megger, and insulation tester. Understanding of preventive and breakdown maintenance. Basic PLC knowledge is an advantage. Knowledge of LOTO procedures and electrical safety standards.</p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Technology Development Associate</h4> <p><strong>Entry-level | Iraqi nationals | Majnoon Oil Field, Basrah</strong></p> <h4>Role details</h4> <p><strong>Department:</strong> Information Technology<br> <strong>Location:</strong> Majnoon Oil Field, Basrah, Iraq<br> <strong>Eligibility:</strong> Iraqi nationals only<br> <strong>Work pattern:</strong> 5/2 daily commuter<br> <strong>Reports to:</strong> Technology Development Supervisor</p> <h4>About the role</h4> <p>KBR is seeking motivated Iraqi national graduates to join the IFMS project at Majnoon Oil Field as Technology Development Associates. This is an entry-level position that provides a structured development pathway into the disciplines of Information Management (IM), Information Technology (IT), Digital Solutions, Cyber Security, Applications, Data Management, Operational Technology, and SAP.</p> <p>The role is designed for early-career graduates who demonstrate strong potential, a willingness to learn, and a commitment to building a long-term career in the oil and gas sector. You will follow a customized development plan combining formal training, on-the-job experience, mentoring, and practical project assignments, with the aim of progressing into specialist or technical roles upon successful completion of the program.</p> <h4>Key responsibilities</h4> <ul> <li>Participate in a structured graduate development and rotational training program across relevant technology disciplines</li> <li>Support daily activities within assigned teams including IM, IT, Cyber Security, Digital Solutions, SAP, Data Management, and Operational Technology</li> <li>Assist experienced professionals with project, operational, and end-user support activities</li> <li>Complete assigned technical, business, and professional development courses</li> <li>Contribute to data collection, analysis, reporting, and documentation tasks</li> <li>Participate in workshops, mentoring sessions, and knowledge-sharing activities</li> <li>Support technology adoption, user engagement, and continuous improvement initiatives</li> <li>Develop an understanding of oil and gas business processes and the technologies that support them</li> <li>Demonstrate commitment to HSE standards, company policies, and professional conduct at all times</li> </ul> <h4>What we are looking for</h4> <p>We are recruiting on potential, not experience. The following attributes define the candidate we want:</p> <ul> <li>Strong written and verbal communication skills in English</li> <li>Positive, professional attitude with high levels of motivation and enthusiasm</li> <li>Intellectual curiosity and a genuine desire to learn</li> <li>Strong interpersonal and teamwork capabilities</li> <li>Good organizational and time management skills</li> <li>Ability to adapt to changing priorities in a dynamic field environment</li> <li>Commitment to personal growth and continuous professional development</li> <li>Desire to build a long-term career within Iraq's energy sector</li> </ul> <h4>Qualifications & requirements</h4> <p><strong>Education</strong><br> Bachelor's degree from an accredited institution — recent graduates encouraged to apply<br> Relevant disciplines include: Information Technology, Computer Science, Information Systems, Engineering, Data Science, Business Information Systems, Electronics, Telecommunications, Cyber Security, or Business English / Communications</p> <p><strong>Language</strong><br> English: Good written and verbal communication required<br> Arabic: Native</p> <p><strong>Technical skills</strong><br> Basic familiarity with Microsoft Office 365, computer hardware/software, and digital tools<br> General awareness of IT, data, or cyber security concepts is advantageous — training will be provided</p> <p><strong>Advantageous certifications (not mandatory)</strong><br> Microsoft Fundamentals, ITIL Foundation, Cisco Networking Fundamentals, Cyber Security Fundamentals, Cloud Fundamentals (Azure / AWS), Data Analytics Fundamentals, or any recognized technology certification</p> <h4>Career development</h4> <p>Upon successful completion of the program, associates may progress into specialist roles such as IT Support Specialist, Information Management Specialist, SAP Support Analyst, Cyber Security Analyst, Digital Solutions Coordinator, Data Analyst, Infrastructure Support Engineer, or Applications Support Analyst — aligned to individual aptitude and business requirements.</p></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Technology Development Associate</h4> <p><strong>Entry-level | Iraqi nationals | Majnoon Oil Field, Basrah</strong></p> <h4>Role details</h4> <p><strong>Department:</strong> Information Technology<br> <strong>Location:</strong> Majnoon Oil Field, Basrah, Iraq<br> <strong>Eligibility:</strong> Iraqi nationals only<br> <strong>Work pattern:</strong> 5/2 daily commuter<br> <strong>Reports to:</strong> Technology Development Supervisor</p> <h4>About the role</h4> <p>KBR is seeking motivated Iraqi national graduates to join the IFMS project at Majnoon Oil Field as Technology Development Associates. This is an entry-level position that provides a structured development pathway into the disciplines of Information Management (IM), Information Technology (IT), Digital Solutions, Cyber Security, Applications, Data Management, Operational Technology, and SAP.</p> <p>The role is designed for early-career graduates who demonstrate strong potential, a willingness to learn, and a commitment to building a long-term career in the oil and gas sector. You will follow a customized development plan combining formal training, on-the-job experience, mentoring, and practical project assignments, with the aim of progressing into specialist or technical roles upon successful completion of the program.</p> <h4>Key responsibilities</h4> <ul> <li>Participate in a structured graduate development and rotational training program across relevant technology disciplines</li> <li>Support daily activities within assigned teams including IM, IT, Cyber Security, Digital Solutions, SAP, Data Management, and Operational Technology</li> <li>Assist experienced professionals with project, operational, and end-user support activities</li> <li>Complete assigned technical, business, and professional development courses</li> <li>Contribute to data collection, analysis, reporting, and documentation tasks</li> <li>Participate in workshops, mentoring sessions, and knowledge-sharing activities</li> <li>Support technology adoption, user engagement, and continuous improvement initiatives</li> <li>Develop an understanding of oil and gas business processes and the technologies that support them</li> <li>Demonstrate commitment to HSE standards, company policies, and professional conduct at all times</li> </ul> <h4>What we are looking for</h4> <p>We are recruiting on potential, not experience. The following attributes define the candidate we want:</p> <ul> <li>Strong written and verbal communication skills in English</li> <li>Positive, professional attitude with high levels of motivation and enthusiasm</li> <li>Intellectual curiosity and a genuine desire to learn</li> <li>Strong interpersonal and teamwork capabilities</li> <li>Good organizational and time management skills</li> <li>Ability to adapt to changing priorities in a dynamic field environment</li> <li>Commitment to personal growth and continuous professional development</li> <li>Desire to build a long-term career within Iraq's energy sector</li> </ul> <h4>Qualifications & requirements</h4> <p><strong>Education</strong><br> Bachelor's degree from an accredited institution — recent graduates encouraged to apply<br> Relevant disciplines include: Information Technology, Computer Science, Information Systems, Engineering, Data Science, Business Information Systems, Electronics, Telecommunications, Cyber Security, or Business English / Communications</p> <p><strong>Language</strong><br> English: Good written and verbal communication required<br> Arabic: Native</p> <p><strong>Technical skills</strong><br> Basic familiarity with Microsoft Office 365, computer hardware/software, and digital tools<br> General awareness of IT, data, or cyber security concepts is advantageous — training will be provided</p> <p><strong>Advantageous certifications (not mandatory)</strong><br> Microsoft Fundamentals, ITIL Foundation, Cisco Networking Fundamentals, Cyber Security Fundamentals, Cloud Fundamentals (Azure / AWS), Data Analytics Fundamentals, or any recognized technology certification</p> <h4>Career development</h4> <p>Upon successful completion of the program, associates may progress into specialist roles such as IT Support Specialist, Information Management Specialist, SAP Support Analyst, Cyber Security Analyst, Digital Solutions Coordinator, Data Analyst, Infrastructure Support Engineer, or Applications Support Analyst — aligned to individual aptitude and business requirements.</p></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The IT HCS & VMware Platform Supervisor is responsible for supervising the operation, administration, governance, and continuous improvement of the Huawei Cloud Stack (HCS) platform and related private or hybrid cloud services across the IT data center environment.</p> <p>The role leads HCS platform support activities to ensure secure, available, scalable, and recoverable cloud services, while coordinating with infrastructure, network, security, application, vendor, and service management teams to meet business continuity and operational requirements.</p> <h4>Duties and responsibilities</h4> <ul> <li>Supervise daily administration of Huawei Cloud Stack services including ManageOne, FusionCompute, resource pools, projects or tenants, compute, storage, virtual networking, identity and access, monitoring, and platform health.</li> <li>Lead and guide platform engineers and support teams in incident handling, service requests, change implementation, preventive maintenance, lifecycle upgrades, and compliance with approved procedures.</li> <li>Monitor HCS capacity, utilization, performance, availability, licensing, quotas, and service levels; prepare forecasts and implement optimization plans for efficient resource usage.</li> <li>Oversee integration of HCS with VMware platforms, enterprise storage, SAN or NAS connectivity, backup systems, Active Directory, DNS, networking, security, monitoring, and IT service management tools.</li> <li>Ensure backup, replication, snapshot, restore, and disaster recovery processes are properly configured and tested; coordinate recovery exercises against approved RPO and RTO targets.</li> <li>Review and approve technical change plans, method statements, risk assessments, rollback plans, patching activities, configuration baselines, and security hardening requirements.</li> <li>Troubleshoot and supervise resolution of complex platform incidents by analyzing logs, alerts, performance data, and root causes; coordinate corrective actions with Huawei, vendors, and internal teams.</li> <li>Maintain platform documentation, architecture diagrams, runbooks, SOPs, asset records, KPI reports, and continuous improvement actions; promote automation using PowerShell, PowerCLI, Python, APIs, or approved orchestration tools.</li> </ul> <h4>Qualifications, training & certifications</h4> <ul> <li>Bachelor’s degree in Computer Engineering, Computer Science, Information Technology, Network Engineering, or a related discipline.</li> <li>At least one current professional certification in cloud computing, virtualization, systems infrastructure, storage, backup, or IT service management is required.</li> <li>Huawei HCIP-Cloud Computing, HCIP-Cloud Service, or equivalent Huawei Cloud Stack professional certification is strongly preferred; HCIE-Cloud Computing is an advantage.</li> <li>Huawei Cloud Stack administration, ManageOne, FusionCompute, FusionStorage, or HCS operations training is strongly preferred.</li> <li>VMware Certified Professional - VCF Administrator, VVF Administrator, or Data Center Virtualization certification is preferred.</li> <li>Microsoft Certified: Azure Administrator Associate (AZ-104) or Azure Solutions Architect Expert (AZ-305 path) is an advantage for hybrid cloud responsibilities.</li> <li>Cisco Certified Network Associate (CCNA) or equivalent networking certification is preferred.</li> <li>ITIL Foundation (current version) is preferred; service management, change management, or project coordination training is an advantage.</li> <li>Veeam Certified Engineer Plus (VMCE+) or an equivalent enterprise backup and recovery certification is an advantage.</li> <li>Strong knowledge of HCS operations, virtualization, storage, backup, disaster recovery, Windows and Linux systems, networking, security, monitoring, and automation scripting.</li> <li>Strong leadership, professional communication, analytical troubleshooting, technical reporting, architecture documentation, and stakeholder coordination skills.</li> </ul> <h4>Experience</h4> <ul> <li>7-10 years of professional experience in cloud, virtualization, systems, data center, or enterprise infrastructure operations.</li> <li>Minimum 4-6 years of hands-on experience with Huawei Cloud Stack, ManageOne, FusionCompute, VMware, enterprise storage, backup, replication, and disaster recovery operations, including at least 2-3 years in a lead or supervisory role.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <p>Core platforms and tools:</p> <ul> <li>Huawei Cloud Stack, ManageOne, FusionCompute, FusionStorage, and HCS monitoring tools</li> <li>VMware vSphere, vCenter, ESXi, VCF or VVF, templates, clusters, HA and DRS</li> <li>SAN/NAS storage, backup and replication tools, PowerShell, PowerCLI, Python, APIs, monitoring platforms, and ITSM ticketing tools</li> <li>English - upper intermediate or above (verbal and written)</li> </ul> <h4>Skills</h4> <ul> <li>Strong leadership and supervisory capability across HCS platform operations, incident response, change delivery, vendor coordination, and team workload management.</li> <li>Advanced troubleshooting across HCS, virtualization, storage, backup, networking, security, and infrastructure services, with strong availability and risk awareness.</li> <li>Ability to manage incidents, problems, changes, risks, capacity, lifecycle activities, audit findings, and service improvement plans within agreed service levels.</li> <li>Strong documentation, reporting, automation, governance, and communication skills with readiness to support critical incidents, migrations, upgrades, and recovery activities.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The IT HCS & VMware Platform Supervisor is responsible for supervising the operation, administration, governance, and continuous improvement of the Huawei Cloud Stack (HCS) platform and related private or hybrid cloud services across the IT data center environment.</p> <p>The role leads HCS platform support activities to ensure secure, available, scalable, and recoverable cloud services, while coordinating with infrastructure, network, security, application, vendor, and service management teams to meet business continuity and operational requirements.</p> <h4>Duties and responsibilities</h4> <ul> <li>Supervise daily administration of Huawei Cloud Stack services including ManageOne, FusionCompute, resource pools, projects or tenants, compute, storage, virtual networking, identity and access, monitoring, and platform health.</li> <li>Lead and guide platform engineers and support teams in incident handling, service requests, change implementation, preventive maintenance, lifecycle upgrades, and compliance with approved procedures.</li> <li>Monitor HCS capacity, utilization, performance, availability, licensing, quotas, and service levels; prepare forecasts and implement optimization plans for efficient resource usage.</li> <li>Oversee integration of HCS with VMware platforms, enterprise storage, SAN or NAS connectivity, backup systems, Active Directory, DNS, networking, security, monitoring, and IT service management tools.</li> <li>Ensure backup, replication, snapshot, restore, and disaster recovery processes are properly configured and tested; coordinate recovery exercises against approved RPO and RTO targets.</li> <li>Review and approve technical change plans, method statements, risk assessments, rollback plans, patching activities, configuration baselines, and security hardening requirements.</li> <li>Troubleshoot and supervise resolution of complex platform incidents by analyzing logs, alerts, performance data, and root causes; coordinate corrective actions with Huawei, vendors, and internal teams.</li> <li>Maintain platform documentation, architecture diagrams, runbooks, SOPs, asset records, KPI reports, and continuous improvement actions; promote automation using PowerShell, PowerCLI, Python, APIs, or approved orchestration tools.</li> </ul> <h4>Qualifications, training & certifications</h4> <ul> <li>Bachelor’s degree in Computer Engineering, Computer Science, Information Technology, Network Engineering, or a related discipline.</li> <li>At least one current professional certification in cloud computing, virtualization, systems infrastructure, storage, backup, or IT service management is required.</li> <li>Huawei HCIP-Cloud Computing, HCIP-Cloud Service, or equivalent Huawei Cloud Stack professional certification is strongly preferred; HCIE-Cloud Computing is an advantage.</li> <li>Huawei Cloud Stack administration, ManageOne, FusionCompute, FusionStorage, or HCS operations training is strongly preferred.</li> <li>VMware Certified Professional - VCF Administrator, VVF Administrator, or Data Center Virtualization certification is preferred.</li> <li>Microsoft Certified: Azure Administrator Associate (AZ-104) or Azure Solutions Architect Expert (AZ-305 path) is an advantage for hybrid cloud responsibilities.</li> <li>Cisco Certified Network Associate (CCNA) or equivalent networking certification is preferred.</li> <li>ITIL Foundation (current version) is preferred; service management, change management, or project coordination training is an advantage.</li> <li>Veeam Certified Engineer Plus (VMCE+) or an equivalent enterprise backup and recovery certification is an advantage.</li> <li>Strong knowledge of HCS operations, virtualization, storage, backup, disaster recovery, Windows and Linux systems, networking, security, monitoring, and automation scripting.</li> <li>Strong leadership, professional communication, analytical troubleshooting, technical reporting, architecture documentation, and stakeholder coordination skills.</li> </ul> <h4>Experience</h4> <ul> <li>7-10 years of professional experience in cloud, virtualization, systems, data center, or enterprise infrastructure operations.</li> <li>Minimum 4-6 years of hands-on experience with Huawei Cloud Stack, ManageOne, FusionCompute, VMware, enterprise storage, backup, replication, and disaster recovery operations, including at least 2-3 years in a lead or supervisory role.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <p>Core platforms and tools:</p> <ul> <li>Huawei Cloud Stack, ManageOne, FusionCompute, FusionStorage, and HCS monitoring tools</li> <li>VMware vSphere, vCenter, ESXi, VCF or VVF, templates, clusters, HA and DRS</li> <li>SAN/NAS storage, backup and replication tools, PowerShell, PowerCLI, Python, APIs, monitoring platforms, and ITSM ticketing tools</li> <li>English - upper intermediate or above (verbal and written)</li> </ul> <h4>Skills</h4> <ul> <li>Strong leadership and supervisory capability across HCS platform operations, incident response, change delivery, vendor coordination, and team workload management.</li> <li>Advanced troubleshooting across HCS, virtualization, storage, backup, networking, security, and infrastructure services, with strong availability and risk awareness.</li> <li>Ability to manage incidents, problems, changes, risks, capacity, lifecycle activities, audit findings, and service improvement plans within agreed service levels.</li> <li>Strong documentation, reporting, automation, governance, and communication skills with readiness to support critical incidents, migrations, upgrades, and recovery activities.</li> </ul></p><p></p>

<p><h4>Instrument & Controls Lead Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>We are looking for an Instrument & Controls (I&C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument & Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&C Engineers as direct reports.</p> <h4>Responsibilities</h4> <ul> <li>Production delivery, optimisation & excellent performance</li> <li>Responsible for day-to-day optimization of I&C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity.</li> <li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed, and managed via operational risk assessment processes.</li> <li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li> <li>Prioritize I&C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li> <li>Actively lead continuous improvement projects involving instrumentation, automation, and control systems; promote continuous improvement philosophy and engage site teams to drive improvement initiatives.</li> </ul> <h4>Qualifications</h4> <ul> <li>Above 10 years experience in oil and gas industry, preferably with international oil companies (direct or contract).</li> <li>Technical degree in engineering or relevant engineering subject.</li> <li>Experience in previous asset engineering or operations engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal, and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – Office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behaviour change management.</li> <li>Not essential but preferable: professional (chartered) engineer.</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Certified professional engineer.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p>We are recruiting for a Welding Engineer with the following details : Location : Basrah, IRAQ Duration : 12 months, renewable Work Scheme : Rotational, 4 weeks ON and 4 weeks OFF Job Overview / Summary Ensure that all welding activities related to pipelines, flowlines, piping, and structures are performed in compliance with Project Specifications, approved procedures, applicable codes.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience Requirements</p><ul><li><p><strong>Total Experience Required:</strong> 20 years in Oil and Gas projects</p></li><li><p><strong>Relevant Experience Required:</strong> 10 years in a similar position</p></li><li><p><strong>Industry-Specific Experience:</strong> Oil and Gas projects</p></li></ul><br><p>Qualifications</p><ul><li><p><strong>Minimum Qualification Required:</strong> International Welding Engineer (IWE / IIW) or Engineering degree in a relevant discipline</p></li><li><p><strong>Language Proficiency:</strong> Fluency in English (speaking and writing); Arabic would be a plus</p></li></ul>

<p><h4>Job description</h4> <p><strong>Division:</strong> CSSP (Ratawi Hub – Iraq)<br> <strong>Direction:</strong> PCM</p> <h4>Situation in organization</h4> <p>The Reporting Engineer position is within the Project Control Organization of the project reporting to the Planning & Reporting Manager.</p> <h4>Job dimensions</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics.</p> <p>In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment.</p> <p>The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.</p> <p>Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr.</p> <p>The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process.</p> <p>The budget of the WIP is circa $3 billion.</p> <p>The Reporting Engineer is expected to commence duties in the 3rd quarter of 2026 and will be based in Basra.</p> <h4>Activities</h4> <p><strong>1- Reporting & Analysis</strong><br> <li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.).</li> <li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries.</li> <li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates.</li> <li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li> <li>Ensure consistency and traceability of reporting documentation across all project phases.</li></p> <p><strong>2- HSE & Risk Reporting</strong><br> <li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams.</li> <li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting.</li> <li>Assist in compiling and presenting periodic risk assessments and mitigation tracking.</li></p> <p><strong>3- Systems & Tools</strong><br> <li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports.</li> <li>Ensure data integrity and alignment between planning, cost control, and reporting systems.</li></p> <p><strong>4- Documentation & Compliance</strong><br> <li>Ensure compliance with TotalEnergies, BOC, and project standards for reporting procedures.</li> <li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation.</li> <li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.</li></p> <p><strong>5- Information Management & Digitalization</strong><br> <li>Lead project information management and digitalization activities.</li> <li>Supervise the Information Management Assistant and oversee project information, data, and records management.</li> <li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders.</li> <li>Coordinate information exchange between Company and Contractors.</li> <li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems.</li> <li>Develop and maintain project data repositories, dashboards, and reporting systems.</li></p> <h4>Context and environment</h4> <p>TotalEnergies is acting as contractor to BOC. After the completion of the project, the facilities will be handed over to BOC for operation.</p> <h4>Accountabilities</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision-making across all stakeholders.</p> <h4>Qualifications / Experience required</h4> <li>Degree in engineering, data analytics, or related field.</li> <li>Minimum 5 years of experience in project reporting within large-scale industrial or oil & gas projects.</li> <li>Strong analytical and data visualization skills.</li> <li>Proficiency in reporting tools (Power BI, Excel, Word, PowerPoint, etc.).</li> <li>Experience in information management or project data management.</li> <li>Understanding of data governance and information quality principles.</li> <li>Good communication and organizational skills.</li> <li>Ability to work in a multicultural and high-pressure environment.</li> <li>Experience in engineering/construction commercial or contracts administration role.</li> <li>Ability to listen to and understand the signals and queries from various interlocutors.</li> <li>Languages: English is mandatory; knowledge of French and Arabic is a plus.</li></p><p></p>

<p>Under the overall guidance of the Project Manager and the direct supervision of the Lead Civil Engineer, the Civil Engineer is required to perform the following specific duties and responsibilities ensuring their effectiveness, transparency, and integrity:</p> <p>Plan, supervise, and manage the implementation of rehabilitation and/or construction works, ensuring alignment with project requirements, timelines, and budgets.</p> <p>Responsible for implementation and contributing to the preparation of the bill of quantities, as-built and construction drawings, Specifications and other engineering documents.</p> <p>Responsible for day-to-day site visit of the construction works, coordination with the contractors and suppliers according to the needs and requirements on site; Inspects and report on contractor s works in progress ensuring that the contractor meets client`s quality standards and implement the contract in accordance with the regulations.</p> <p>Provide support and guidance to the contractor and assists in resolving site problems, as necessary; Assist in the preparation of project plans, detailed schedules, and progress reports, and contribute to project closure activities and documentation.</p> <p>Responsible for supervision of site technical staff and consultants assigned to the project, and the assignment and monitoring of duties during the progress of works; Liaise with relevant government authorities, beneficiaries, and stakeholders to facilitate permits, secure approvals, and maintain effective working relationships.</p> <p>Embed sustainability dimensions including social and gender inclusion, as well as Health, Safety, Security, and Environmental (HSSE) aspects into the project during the design and construction phases; Ensure PSEA measures are implemented throughout the project implementation, as per the country PSEA action plan; Perform other related duties as required by the Project Manager.</p> <p>Supervise and monitor contractors setting-out and construction activities, ensuring full compliance with contract specifications, approved work plans, and project requirements in terms of scope, timeline, and budget; Conduct daily site visits to monitor work progress, identify issues, and propose practical engineering solutions in coordination with the Project Manager and Lead Civil Engineer; Responsible for preparation of progress reports on construction activities, according to the agreed timeframe of works and submission of such on a weekly basis to the Project Manager; Assess and report on the project closing plans, archiving of cost and progress report and hand over all related reports to the Project Manager; Evaluate and assess work schedules and programmes, including the comparison with the schedule baselines and reports to the Project Manager accordingly; Check all laboratory reports, operation and maintenance manuals, and keep records and report to the Project Manager accordingly; Assess the work activities of contractor/s, measure completed work, and make recommendations to the Project Manager for progress payments to contractors.</p> <p>Carry out on-site technical inspections and assessments to ensure that all construction activities comply with client`s quality standards and approved project specifications. Maintain accurate records and compile periodic and ad hoc reports in accordance with client`s procedures and reporting requirements.</p> <p>Conduct site inspections, testing, and quantity verification, and review/approve technical submittals including shop drawings, material approvals, and as-built documentation. Maintain records, compile periodic reports and any specific reports required by client`s standard procedures; Responsible for the preparation and verification of a database for the available materials shipped to the project, schedules of labor force, and monitoring of quality of such during the progress of works; Check, verify and approve the interim payments submitted by the Contractor/s and submit detailed reports to the Project Manager.</p> <p>Maintain accurate records of site activities, inspections, incidents and progress, ensuring timely submission of reports (weekly/monthly/quarterly). Support project closure through commissioning, handover and archiving of construction documentation. Assist in compiling periodic and specific reports, and ensure all project documentation is up-to-date and properly filed. Support the Project Team in overseeing change controls, risk and issue registers, and ensure timely and accurate reporting on project progress.</p> <p>Ensure that lessons learned and challenges are documented throughout the project implementation and shared with the project team; Participate in knowledge-sharing initiatives and contributing insights and lessons learned.</p> <p>Project reporting Civil Engineer will be reporting to Lead Civil Engineer and/or Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><h3>Key competencies</h3> <p>A minimum of 2 years of experience in development and coordination within agricultural, water resources , or related projects, particularly in irrigation (Open Channels and Closed Pipe System) and water-related activities, is required. Experience in site supervision, as well as monitoring and evaluation, is required. Experience working on international and/or local projects in conflict-affected areas is preferred. Experience in implementing and delivering projects for international organizations is considered an asset. Experience in report writing, data analysis, and document drafting is desirable. Experience in Health and Safety Management is desirable. Experience in quality assurance and quality control (QA/QC) for infrastructure projects is desirable. Experience working in the southern governorates is desirable.</p> <h3>Team management</h3> <p>This role has no team management</p> <h3>Further information</h3> <p>Disclaimer: At no stage of the recruitment process will CTG ask candidates for a fee. This includes during the application stage, interview, assessment and training. CTG has a zero tolerance to Sexual Exploitation and Abuse (SEA) which is outlined in its Code of Conduct. Protection from SEA is everyone s responsibility CTG encourages all candidates applying for this advertisement to ensure that their candidate profile is up to date with up to date experience / education / contact details, as this will help you being considered further in your application for this role.</p>

<p><h4>Petroleum engineer (reservoir)</h4> <p>Under direct supervision, this position is responsible for all phases of planning and execution on a small project or may be responsible for a segment of a larger project.</p> <p>Plans, organizes, coordinates, and controls small engineering projects in accordance with the established policies, procedures, systems, and requirements approved by the company.</p> <p>Contributes toward the day to day contact and communication with the client and focuses on providing client satisfaction.</p> <p>Possesses knowledge of the respective industry.</p> <p>Skills are typically acquired through completion of an undergraduate degree in engineering or project management and a minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The site planning engineer is responsible for developing and managing site planning activities to ensure that the project is completed on time and within budget. This role involves coordinating with multidisciplinary teams during the FEED and design phases, focusing on onshore and brownfield projects. The site planning engineer will play a crucial role in implementing effective planning strategies, ensuring resource optimization, and mitigating risks associated with site operations.</p> <h4>Job responsibilities</h4> <li>Develop and maintain detailed project schedules using suitable project management software.</li> <li>Collaborate with engineering, construction, and procurement teams to assess project requirements and ensure alignment with project scope.</li> <li>Perform risk analysis and assessment to identify potential issues in project execution and propose corrective actions.</li> <li>Monitor project progress and report regularly to senior management and project stakeholders.</li> <li>Facilitate site assessments and prepare relevant reports to support decision-making processes.</li> <li>Ensure compliance with safety regulations and promote a culture of safety on-site.</li> <li>Maintain effective communication with all project stakeholders and foster strong working relationships.</li> <li>Participate in project meetings, providing insights on planning and scheduling aspects.</li> <li>Contribute to continuous improvement efforts by proposing innovative planning solutions and methodologies.</li> <li>Assist in the development of progress reports and other documentation as required by project management.</li> <h4>Functional responsibilities</h4> <li>Implementing site logistics and resource plans, considering workforce and construction equipment requirements.</li> <li>Coordinating with the engineering team to integrate design changes into the project schedule effectively.</li> <li>Evaluating and monitoring subcontractor performance in relation to planning and execution benchmarks.</li> <li>Preparing and analyzing variance reports to identify schedule delays or inefficiencies.</li> <h4>Technical skills</h4> <li>Proficient in project scheduling software (e.g., Primavera P6, MS Project).</li> <li>Strong understanding of project management principles, methodologies, and tools.</li> <li>Familiarity with FEED (Front-End Engineering Design) processes and brownfield project challenges.</li> <li>Ability to read and interpret engineering drawings and specifications.</li> <li>Competent in risk management and mitigation strategies.</li> <h4>Soft skills</h4> <li>Excellent communication and interpersonal skills to work collaboratively with diverse teams.</li> <li>Strong analytical and problem-solving abilities.</li> <li>Proactive attitude and ability to work under tight deadlines and pressure.</li> <li>Strong organizational skills and attention to detail.</li> <h4>Qualification</h4> <p>Must have 10 years of experience in site planning and project controls.</p> <p><strong>Mandatory:</strong></p> <li>Bachelor’s degree in engineering in related field from reputed university.</li> <p><strong>Good to have:</strong></p> <li>Master’s degree in engineering in related field from reputed university.</li> <h4>Work environment</h4> <li>The role will primarily be based on-site in Iraq, requiring a commitment to a dynamic and fast-paced work environment. The position may involve working in varying weather conditions and adhering to local health and safety regulations.</li> <li>Flexibility in working hours may be required to accommodate project demands and deadlines.</li></p><p></p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>