Pipe fitter Jobs

<p>To work as a Pipe Fitter at project site.</p><p>Measure, cut, thread, bend, and assemble pipes using hand and power tools. Install hangers, supports, and other components to secure piping systems. Install piping systems for water supply, drainage, sewage, and stormwater as per site requirements. Inspect completed systems to ensure compliance with construction and safety standards. Carry out routine maintenance or repair of existing piping infrastructure.</p><p><strong>Desired Candidate Profile</strong></p><p>High School diploma or equivalent. Preferably Ex-Daewoo. Proven experience of 06 years in constructions, specifically in fertilizer or petrochemical process projects.</p>

<p>A pipefitter attaches pipes to walls, structures and fixtures, such as radiators or tanks, using brackets, clamps, tools or welding equipment. Pipefitters measure and mark pipes for cutting, threading and welding. They use specific tools such as saws, cutting torches, pipe threaders, benders, and welders.</p><p>1) Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. 2) Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.</p><p><strong>Desired Candidate Profile</strong></p><p>1) Cut, thread, and hammer pipe to specifications, using tools such as saws, cutting torches, and pipe threaders and benders. 2) Assemble and secure pipes, tubes, fittings, and related equipment, according to specifications, by welding, brazing, cementing, soldering, and threading joints.</p>

<p>Working As Pipe Foreman</p><p>1. Finish the Work for pipe installation; especially power plant piping system (GRP firstly).</p><p>2. Have 10 years pipe installation experience</p><p>3. More than 5 power plant work experience for piping.</p><p>4. Have the experience of GRP &amp;HDPE&amp;PVC pipe, S.S pipe, C.S pipe installation, flange connection.</p><p>5. Have the skill to manage the team.</p><p>6. Read drawing and arrange the work to fitters and workers.</p><p>7. Analysis the schedule of monthly work and arrange weekly work.</p><p>8. Hold the inspection work when the work finish.</p><p>9. Communicate to labors to know the ideological trend .</p><p>10. Communicate to the owner and other party to solve the construction problem.</p><p>11. Make daily and weekly report of his work.</p><p>12. Gulf countries working experience is preferred</p><p><strong>Desired Candidate Profile</strong></p><ul><li>10 years pipe installation experience</li><li>More than 5 power plant work experience for piping.</li><li>Have the skill to manage the team</li><li>Good command of English.</li><li>Have the experience of GRP &amp;HDPE&amp;PVC pipe, S.S pipe, C.S pipe installation, flange connection.</li><li>Read drawing and arrange the work to fitters and workers.</li><li>Analysis the schedule of monthly work and arrange weekly work.</li><li>Hold the inspection work when the work finish.</li><li>Communicate to labors to know the ideological trend .</li><li>Communicate to the owner and other party to solve the construction problem.</li><li>Make daily and weekly report of his work.</li><li>Gulf countries working experience is preferred</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Applying and following the client contractual QHSE obligations, PSGS’ QHSE policy and procedures.</p><p>• Maintaining the integrity of the ISO Management Documentation System and standards of ISO 9001, ISO 14001, ISO 22000, &amp; ISO 45001.</p><p>• Maintaining, repairing and installing plumbing and related fixtures and components, as well as appliances and trims.</p><p>• Repairing piping of various sizes and types.</p><p>• Checking safety equipment and replacing components such as washers, gaskets and filters.</p><p>• Inspecting, repairing or replacing pumps, valves and boiler systems.</p><p>• Monitoring work done by outside contractors for adherence to Plumbing Code Requirements and reporting back to direct manager.</p><p>• Installing supports and hangers for pipes, fixtures and equipment.</p><p>• Assembling and installing valves and fittings.</p><p>• Installing, repairing and maintaining water treatment equipment, piping and controls.</p><p>• Testing pipe systems and fixtures for leaks.</p><p>• Ensuring all installations, repairing and maintenance meet the requirements of the appropriate codes.</p><p>• Maintaining good relationship with the client to accomplish ongoing tasks in a timely manner.</p><p>• Ensuring all installations, repairs and maintenance meet environmental protection requirements.</p><p>• Maintaining appropriate service and repair records.</p><p>• Performing preventive/corrective maintenance and call-off activities on daily, weekly and monthly basis and ensuring that the company avoids any liquidated damages.</p><p>• Controlling the inventory for related equipment parts and supplies.</p><p>• Preparing Permit to Work and daily/weekly/monthly reports and sharing them with the management.</p><p>• Preparing estimation for call-off works and sharing it with the management.</p><p>• Coordinating with the client on regular basis for related works and assisting in completing the third-party request.</p><p>• Performing other duties as directed.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>·&nbsp;&nbsp;&nbsp;Diploma in Mechanical or Trade Certificate or a similar discipline</p><p>·&nbsp;&nbsp;&nbsp;5+ years in a similar role, Middle East experience preferred</p><p>·&nbsp;&nbsp;&nbsp;Must understand regulatory compliance and be able to maintain and submit any documentation required</p><p>·&nbsp;&nbsp;&nbsp;Fluent in English, Arabic is an added value</p><p>·&nbsp;&nbsp;&nbsp;Computer literate</p><p><br></p></div>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Key responsibilities</h4> <ul> <li>Develop civil and structural bill of material.</li> <li>Prepare layouts and detail drawings.</li> <li>Create civil grading and roadway models using Civil 3D and prepare 2D drawing packages from the design models.</li> <li>Collaborate with other disciplines and the project engineering team for structural design requirements.</li> <li>3D modeling of RCC foundations, piles, pile caps.</li> <li>Extraction of GA drawings. Development of RCC details, base plate and anchor bolts.</li> <li>3D modeling, drawing extractions and development of structural steel details, pipe racks, technological structures, shelters, grade mounted platforms, vessel mounted platforms, pipe supports, equipment foundations, roads and drains.</li> <li>Perform calculations and layouts including 2D and 3D models with adequate dimensions necessary to assist the engineering disciplines and fabrication/construction personnel including preparation of topographic layouts, earthworks/excavation drawings, boreholes locations, fencing, paved roads and drainage, underground piping and foundations, architectural and conceptual building drawings, control room layouts, substation layouts, machinery shelters, service platforms, pipe racks, pump foundations, vessel and vessel platform foundations, columns and other civil/structural drawings.</li> <li>Perform layout clash/interface checks, identify conflicts, take corrective action in coordination with other engineering discipline inputs.</li> <li>Issue engineering drawings and layouts for inter-discipline checks (IDCs), coordinate with other engineering disciplines in the integration of technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. Consult and make recommendations to engineers on feasibility of design plans and layouts.</li> <li>Estimation and preparation of material take-offs (MTOs), review vendor drawings, ensure vendor specifications are in full compliance with contract/project requirements.</li> <li>Prepare red-line markups, resolution of site queries from construction and fabrication shop queries / TQs. Preparation of detail sketches to support resolution of site and fabrication queries. Updating of 3D model.</li> <li>Prepare “as-built” drawings following completion of construction activities.</li> </ul> <h4>Essential qualifications and skills</h4> <ul> <li>10 years’ experience.</li> <li>Must have proficiency in AutoCAD and Navisworks software.</li> <li>Experience supervising small teams.</li> </ul></p><p></p>

<p><br></p> <p> </p> <p> <strong> The role </strong> </p> <p>This is an exciting opportunity for an experienced Piping Drafter 3D to join our Iraq Business Unit.</p> <p> <strong>Our Clients and Projects </strong> </p> <p> <strong>Designing the future. Transforming the world. </strong> </p> <p>Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering &amp; Design Services. The Vision of this Contract is to enhance the production &amp; assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery &amp; Replacement/upgrade of obsolete equipment, piping &amp; systems.</p> <p> <strong> What we can offer </strong> </p> <ul> <li> <strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li> <strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li> <strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li> <strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li> <strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li> <strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li> <strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones </li> </ul> <p> </p> <p> <strong> Job Objectives: </strong> </p> <p>The Piping Designer administratively reports to the Wood Site Manager. The Piping Designer supports various Project Managers for the project that he/she is assigned. The role of the Piping Designer is to produce detailed design deliverables as per project Scope of Work. The Piping Designer will also compile design data to support design estimating activities and/or assist Wood Piping Lead with design estimating activities as required.</p> <p> </p> <p> <strong>Key Accountabilities and Responsibilities:</strong> </p> <ul> <li>Meet or exceed the company and customer safety standards.</li> <li>Comply with all company and customer procedures, engineering practices and other applicable standards.</li> <li>Read and fully understand P&amp;ID s and other related project documents which describe the Scope of Work </li> <li>Perform initial field verification to determine optimum equipment and piping layout, tie-ins to existing facilities. </li> <li>Conceptualize initial design based on red-lined P&amp;IDs depicting project Scope of Work </li> <li>Utilize experience in mechanical equipment, piping and piping components as currently used in chemical and refining manufacturing facilities including pumps, compressors, exchangers, pressure vessels, tanks, towers, pipelines, valves, control valves, filters, piping process codes and use of piping specifications, standards, piping components, materials, and industry codes. </li> <li>Produce detail piping design package based on red-lined P&amp;IDs depicting project Scope of Work, including but not limited to, P&amp;IDs, tie-in location plans, piping plans, sections, demolition drawings and isometrics. </li> <li>Utilize 3D modeling software and 3D survey scan data to produce package deliverables. </li> <li>Prepare and maintain; project drawing/deliverables list, including but not limited to; project line list, project tie-in list and bill of materials list. </li> <li>Provide project progress update to Project Manager, Wood Piping Lead and Wood Site Lead</li> <li>Support Wood and Project Manager in maintaining budget, schedule, and adherence to the agreed to Scope of Work </li> <li>Perform checking of piping design packages and work with responsible designer in assisting to correct any drawings as required. </li> <li>Maintain cooperative, efficient, and good team working environment. </li> <li>Communicate, both verbally and in written form in a professional manner</li> </ul> <p> </p><p><strong>Desired Candidate Profile</strong></p><p> <strong>What makes you remarkable? </strong> </p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p> <p> <strong>Expected:</strong> </p> <ul> <li>8-12+ years Pipe Drafting, Design &amp; Layout experience working in the chemical and refining manufacturing industry </li> <li>Proficiency in AutoDesk AutoCAD 2019 and AutoCAD ReCap 3D Scan Management software </li> <li>Proficiency in 3D Modeling software, CadWorx 2019 and later (Preferred) </li> <li>Proficiency in Microsoft products such as Word, Excel, and Outlook </li> <li>Proficiency in AVEVA E3D (Preferred) </li> <li>Field experience, able to wear required PPE and drive safely to jobsite for design verification.</li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Civil and Structural Design Engineer -Onsite<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: Senior Civil and Structural Design Engineer</b><br><b>Company: </b>KBR-Iraq<br><b>Project: </b>Majnoon<br><b>Location</b>: Basra, Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Required: Expats/Iraqi Nationals</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>JOB TITLE: </b></p><br><br><p><b>KEY RESPONSIBILITIES:</b></p><br><br><ul><li>Develop Civil and Structural bill of materials</li><li>Prepare Layouts and detail drawings.</li><li>Create civil grading and roadway models using Civil 3D and prepare 2D drawing packages from the design models.</li><li>Collaborate with other disciplines and the project engineering team for structural design requirements.</li><li>3D modeling of RCC foundations, Piles, Pile caps,</li><li>Extraction of GA drawings. Development of RCC details, Base plate and Anchor bolts,</li><li>3D modeling, drawing extractions and Development of Structural Steel details, Piperacks, Technological Structures, Shelters, Grade Mounted platforms, Vessel mounted platforms, Pipe supports, Equipment foundations, Roads and Drains.</li><li>Perform calculations and layouts including 2D and 3D models with adequate dimensions necessary to assist the Engineering disciplines and Fabrication/Construction personnel including preparation of topographic layouts, earthworks/excavation drawings, boreholes locations, fencing, paved roads and drainage, underground piping and foundations, architectural and conceptual building drawings, control room layouts, substation layouts, machinery shelters, service platforms, pipe racks, pump foundations, vessel and vessel platform foundations, columns and other Civil/structural drawings.</li><li>Perform layout clash/interface checks, identify conflicts, take corrective action in coordination with other engineering discipline inputs.</li><li>Issue engineering drawings and layouts for Inter-Discipline Checks (IDC’s) coordinate with other engineering discipline in the integration of&nbsp;technical data inputs. Prepare final layouts and drawings integrating inputs provided by other engineering disciplines. Consult and make recommendations to Engineers on feasibility of design plans and layouts.</li><li>Estimation and preparation of material take off’s (MTO’s), review vendor drawings, ensure vendor specifications are in full compliance with contract/ project requirements.</li><li>Prepare Red-line markups, resolution of site queries from Construction and fabrication shop queries / TQs. Preparation of detail sketches to support resolution of site and fabrication queries. Updating of 3D model.</li><li>Prepare “As-Built” Drawings following completion of construction activities.</li></ul><br><p><b>ESSENTIAL QUALIFICATIONS AND SKILLS:</b></p><br><br><ul><li>+10 year’s experience.</li><li>Must – ACAD, Navisworks software</li><li>Supervising Small Teams.</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Piping Drafter 3D to join its Iraq business unit focusing on producing detailed design&nbsp;<br> deliverables as per project Scope of Work.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to:&nbsp;</strong> Site Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Piping Drafter 3D to join its Iraq business unit focusing on producing detailed design&nbsp;<br> deliverables as per project Scope of Work.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to:</strong> &nbsp;Site Manager</p><br><p><i><strong>#Wood #Iraq #Basra #Piping Drafter 3D&nbsp;</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Piping Drafter 3D&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering &amp; Design Services. The Vision of this Contract is to enhance the production &amp; assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery &amp; Replacement/upgrade of obsolete equipment, piping &amp; systems.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p>The Piping Designer administratively reports to the Wood Site Manager. The Piping Designer supports various Project Managers for the project that he/she is assigned. The role of the Piping Designer is to produce detailed design deliverables as per project Scope of Work. The Piping Designer will also compile design data to support design estimating activities and/or assist Wood Piping Lead with design estimating activities as required.</p><br><p><strong>Key Accountabilities and Responsibilities:</strong></p><br><ul> <li>Meet or exceed the company and customer safety standards.</li> <li>Comply with all company and customer procedures, engineering practices and other applicable standards.</li> <li>Read and fully understand P&amp;ID’s and other related project documents which describe the Scope of Work&nbsp;</li> <li>Perform initial field verification to determine optimum equipment and piping layout, tie-ins to existing facilities.&nbsp;</li> <li>Conceptualize initial design based on red-lined P&amp;IDs depicting project Scope of Work&nbsp;</li> <li>Utilize experience in mechanical equipment, piping and piping components as currently used in chemical and refining manufacturing facilities including pumps, compressors, exchangers, pressure vessels, tanks, towers, pipelines, valves, control valves, filters, piping process codes and use of piping specifications, standards, piping components, materials, and industry codes.&nbsp;</li> <li>Produce detail piping design package based on red-lined P&amp;IDs depicting project Scope of Work, including but not limited to, P&amp;IDs, tie-in location plans, piping plans, sections, demolition drawings and isometrics.&nbsp;</li> <li>Utilize 3D modeling software and 3D survey scan data to produce package deliverables.&nbsp;</li> <li>Prepare and maintain; project drawing/deliverables list, including but not limited to; project line list, project tie-in list and bill of materials list.&nbsp;</li> <li>Provide project progress update to Project Manager, Wood Piping Lead and Wood Site Lead</li> <li>Support Wood and Project Manager in maintaining budget, schedule, and adherence to the agreed to Scope of Work&nbsp;</li> <li>Perform checking of piping design packages and work with responsible designer in assisting to correct any drawings as required.&nbsp;</li> <li>Maintain cooperative, efficient, and good team working environment.&nbsp;</li> <li>Communicate, both verbally and in written form in a professional manner</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>8-12+ years Pipe Drafting, Design &amp; Layout experience working in the chemical and refining manufacturing industry&nbsp;</li> <li>Proficiency in AutoDesk AutoCAD 2019 and AutoCAD ReCap 3D Scan Management software&nbsp;</li> <li>Proficiency in 3D Modeling software, CadWorx 2019 and later (Preferred)&nbsp;</li> <li>Proficiency in Microsoft products such as Word, Excel, and Outlook&nbsp;</li> <li>Proficiency in AVEVA E3D &nbsp;(Preferred)&nbsp;</li> <li>Field experience, able to wear required PPE and drive safely to jobsite for design verification.</li></ul> </div>

<p>A. Welding Engineering & Procedure Control • Develop, review, and qualify WPS/PQRs in accordance with project requirements and code standards. • Manage Welder and Welding Operator Performance Qualification (WPQ) and continuity records. • Prepare Weld Maps, Welding Sequence Plans, and Technical Queries (TQs) for design discrepancies. B. Quality Assurance & NDT Control • Lead and supervise the QA/QC team; review and approve Inspection & Test Plans (ITPs) and NDT procedures (RT, UT, MT, PT). • Perform Root Cause Analysis (RCA) of welding failures and NCRs, and propose technical solutions to improve weld quality and productivity. • Interpret radiographic films (RTFI) and witness NDT activities on-site. C. Cross-Country Pipeline Specific Inspection & Execution (??????) • Perform comprehensive pipeline construction inspections along the Right-of-Way (ROW), strictly following API 1104, ASME B31.4/B31.8, and project specifications. • Conduct pre-weld inspections for pipe bevel preparation, root gap, fit-up tolerances, and alignment prior to the root pass. • Supervise field automatic/semi-automatic pipeline welding (GMAW/FCAW) used for large-diameter cross-country lines. • Monitor and verify pre-heat, inter-pass temperatures, and heat input across the pipeline spread to prevent hydrogen cracking. • Coordinate daily NDT activities along the pipeline (RT/AUT), ensuring timely defect identification and rectification. • Inspect field joint coating, holiday testing, and anti-corrosion systems on the girth welds. • Coordinate tie-in welding, lowering, and backfilling activities to maintain continuous construction quality. • Witness Hydrostatic Testing, pigging, and drying procedures for pipeline sections and final mechanical completion. • Maintain comprehensive pipeline weld records, NDT tracking logs, and repair registers for project audit and handover to the Client. D. Field Execution, HSE & Coordination • Provide daily technical support for on-site construction, resolving bottlenecks related to pipelines, piping, and structural work. • Liaise with clients, TPI, and subcontractors, and participate in weekly progress and quality meetings. • Ensure strict compliance with HSE policies (HAZOP, JSA) and issue Lessons Learned and quality feedback notices to the project teams.</p><p>• Minimum 15 years of extensive experience in the Oil & Gas industry, specifically in large-scale EPC projects and cross-country pipeline construction. • Proven hands-on experience in cross-country pipeline projects, including the supervision of automatic and semi-automatic welding spreads (e.g., GMAW/FCAW with Saturnax/Serimax systems), field joint coating, NDT (RT/AUT), and hydrostatic testing. • Demonstrated track record of working with major international operators such as TotalEnergies, Saudi Aramco, or equivalent in onshore pipeline and plant facilities. • Expert knowledge of applicable pipeline codes and standards: API 1104, ASME B31.4, B31.8, DNV-ST-F101, and NACE MR0175/ISO 15156. • Solid experience in field tie-in welding, in-service welding, hot tapping, and sour service environments. • In-depth understanding of pipeline pre-commissioning and commissioning procedures, including pigging and drying operations. • Proven experience in managing pipeline QA/QC data, RT film interpretation (RTFI), and final handover dossiers to meet strict client audit requirements.</p>

<p>Placing the tank Making necessary pipe connections Building a platform for the tank</p><p><strong>Desired Candidate Profile</strong></p><p>Placing the tank Making necessary pipe connections Building a platform for the tank</p>

<p>Job Description:</p><p>Placing the tank Making necessary pipe connections Building a platform for the tank</p><p><br></p><p>Role &amp; Responsibilities:</p><p>Placing the tank Making necessary pipe connections Building a platform for the tank</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>SSC / ITI or High School</p> <p> Minimum 5 8 yrs. experience in the fitting of structural and pipe systems in Offshore &amp; Onshore Oil &amp; Gas field.</p> <p> Can communicate in minimum English</p> <p> Age preferred between 24 45 yrs.</p> <p> </p><p><strong>Desired Candidate Profile</strong></p><p>SSC / ITI or High School</p> <p> Minimum 5 8 yrs. experience in the fitting of structural and pipe systems in Offshore &amp; Onshore Oil &amp; Gas field.</p> <p> Can communicate in minimum English</p> <p> Age preferred between 24 45 yrs.</p>

<ul> <li>Joins and repairs pipes and builds piping assemblies to specified standards.</li> </ul><ul> <li>The P91 abbreviation represents the material's chemical composition: 9 percent chrome and 1 percent molybdenum.</li> </ul><ul> <li>Welding damaged and broken pipes.</li> <li>Ensuring that the welded parts are free of any holes and defects.</li> <li>Adhering to the health and safety guidelines at all times.</li> <li>Performing pre-welding tasks such as clamping and cutting pipes.</li> <li>Inspecting if all tools and equipment are in working order.</li> </ul><ul> <li>Welding damaged and broken pipes.</li> <li>Ensuring that the welded parts are free of any holes and defects.</li> <li>Adhering to the health and safety guidelines at all times.</li> <li>Performing pre-welding tasks such as clamping and cutting pipes.</li> <li>Inspecting if all tools and equipment are in working order.</li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Piping/Tubing Technician </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>fabrication, installation, maintenance, testing, and repair of instrument tubing and small-bore piping systems</strong>. Ensure tubing and piping assemblies are correctly installed, leak-free, properly supported, clean, identified, and protected.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Fabricate and install <strong>instrument tubing and small-bore piping assemblies</strong> in accordance with approved drawings and procedures.</li><li>Perform accurate <strong>tube cutting, bending, routing, and preparation</strong>.</li><li>Install and tighten <strong>compression fittings, manifolds, valves, regulators, and tubing connections</strong>.</li><li>Install and maintain proper <strong>supports, clamps, brackets, and tubing protection</strong>.</li><li>Perform <strong>leak, pressure, and functional tests</strong> as required.</li><li>Inspect tubing and piping for <strong>correct routing, slope, supports, fittings, cleanliness, and workmanship</strong>.</li><li>Troubleshoot and repair <strong>leaks, damaged tubing, fittings, and small-bore piping defects</strong>.</li><li>Support installation and maintenance of <strong>impulse lines, pneumatic tubing, hydraulic tubing, and instrument connections</strong>.</li><li>Ensure tubing systems are properly <strong>identified, tagged, protected, and weatherproofed</strong>.</li><li>Maintain cleanliness and prevent <strong>contamination, moisture ingress, and blockage</strong> during fabrication and installation.</li><li>Restore and verify <strong>supports, clamps, insulation interfaces, and protective arrangements</strong> after maintenance.</li><li>Coordinate with <strong>Instrumentation, Piping, Mechanical, Operations, ICSS, Construction, and HSE</strong> teams.</li><li>Maintain <strong>test records, inspection results, material records, and work completion documentation</strong>.</li><li>Comply with <strong>PTW, LOTO, HSE, pressure safety, quality, and Company requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Piping Engineer to join its Iraq business unit focusing on providing piping engineering expertise to projects and the business.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to:</strong> Lead Piping Engineer / Engineering Manager</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Piping Engineer to join its Iraq business unit focusing on providing piping engineering expertise to projects and the business.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Lead Piping Engineer / Engineering Manager</p><br><p><i><strong>#Wood #Iraq #Basra #Piping Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Piping Engineer to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering &amp; Design Services. The Vision of this Contract is to enhance the production &amp; assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery &amp; Replacement/upgrade of obsolete equipment, piping &amp; systems.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p><strong>Contributes to technical delivery of engineering excellence through:</strong></p><br><ul> <li>Executing assigned piping engineering scopes of work.&nbsp;</li> <li>Providing piping engineering expertise to projects and the business.&nbsp;</li> <li>Producing and reviewing piping engineering deliverables in accordance with project requirements, applicable codes, standards, and client specifications.&nbsp;</li> <li>Performing design and engineering activities for onshore oil &amp; gas facilities, ensuring safe, reliable, and cost-effective solutions.&nbsp;</li> <li>Supporting multidisciplinary project teams throughout concept, FEED, detailed design, construction, commissioning, start-up, and operational phases.&nbsp;</li> <li>Works independently on standard engineering activities and performs more complex assignments under general supervision while ensuring compliance with quality, safety, schedule, and budget requirements.</li> <li>Ability to travel for doing the site survey visits outside of Basra city (e.g. Kirkuk, Nasiriyah, etc.) according to projects demands.&nbsp;</li></ul><p><strong>Key Accountabilities and Responsibilities:</strong></p><br><p><strong>Executes Assigned Scopes of Work:</strong>&nbsp;</p><br><ul> <li>Develop piping engineering deliverables including specifications, calculations, datasheets, technical reports, material requisitions, and engineering studies.&nbsp;</li> <li>Prepare and review piping layouts, GAs, ISOs, plot plans, piping material specifications, line lists, tie-in packages, and support requirements.&nbsp;</li> <li>Ensure all piping engineering activities are performed in accordance with project specifications, company procedures, and applicable international codes and standards.&nbsp;</li> <li>Coordinate with process, mechanical, civil, structural, instrumentation, electrical, and project engineering disciplines.&nbsp;</li> <li>Participate in model reviews and interdisciplinary design reviews.&nbsp;</li> <li>Review and comment on vendor documentation and ensure compliance with project requirements.&nbsp;</li> <li>Provide engineering support during procurement, fabrication, construction, commissioning, and startup activities.</li> <li>Assist with field engineering activities and resolution of site technical queries.</li> <li>Monitor assigned work against project schedules and budgets and provide progress updates.</li> <li>Identify engineering risks and recommend practical solutions.&nbsp;</li> <li>Participate in HAZOP, HAZID, design reviews, constructability reviews, and safety assessments.</li> <li>Promote safe design principles and ensure safety considerations are incorporated into all engineering activities</li></ul><p><strong>Providing discipline expertise:</strong></p><br><ul> <li>Perform piping system design and engineering calculations.&nbsp;</li> <li>Evaluate technical issues and develop effective engineering solutions.&nbsp;</li> <li>Interpret project specifications, client requirements, and industry standards.&nbsp;</li> <li>Support development of piping philosophies, material selection, and stress-related design considerations.</li> <li>Contribute technical expertise during proposal preparation and project execution.&nbsp;</li> <li>Support continuous improvement initiatives, lessons learned, and engineering best practices&nbsp;</li> <li>Assist junior engineers and designers through technical guidance and mentoring.</li></ul><p><strong>Working Relationships:</strong></p><br><p><strong>Internal&nbsp;</strong></p><br><ul> <li>Maintain effective working relationships with project teams and discipline engineers.&nbsp;</li> <li>Coordinate activities with engineering, procurement, construction, and commissioning personnel.&nbsp;</li> <li>Participate in knowledge sharing and discipline improvement initiatives.&nbsp;</li> <li>Contribute positively to team collaboration and technical problem-solving activities.&nbsp;</li></ul><p><strong>External</strong>&nbsp;</p><br><ul> <li>Interface with clients, contractors, vendors, and third-party engineering organizations.&nbsp;</li> <li>Participate in technical meetings and design reviews with stakeholders.&nbsp;</li> <li>Support resolution of vendor and construction-related technical issues.</li></ul><p><strong>Level of Influence and Decision-Making Authority:</strong></p><br><ul> <li>Works independently on routine engineering assignments.&nbsp;</li> <li>Exercises professional judgment in applying engineering principles, standards, and procedures.&nbsp;</li> <li>Responsible for the technical quality and accuracy of assigned deliverables.&nbsp;</li> <li>Provides technical recommendations to project and discipline management.&nbsp;</li> <li>Escalates unusual or high-risk technical matters to senior engineering personnel.&nbsp;</li> <li>May provide technical guidance to graduate engineers, junior engineers, and designers.&nbsp;</li> <li>Responsible for achieving assigned schedule, quality, and cost objectives.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><p><strong>Minimum Qualifications:</strong>&nbsp;</p><br><ul> <li>Bachelor's Degree in Mechanical Engineering or related Engineering discipline.&nbsp;</li> <li>Professional registration or chartership status is desirable.</li></ul><p><strong>Knowledge, Skills and Experience:</strong>&nbsp;</p><br><ul> <li>Typically, 5+ years of relevant piping engineering experience in the oil and gas, petrochemical, energy, or industrial sectors.&nbsp;</li> <li>Experience in onshore oil &amp; gas facilities.&nbsp;</li> <li>Familiarity with international industry codes and standards including ASME, API, ASTM, and relevant client specifications.&nbsp;</li> <li>Knowledge of piping materials, piping layout, stress considerations, and plant design principles.&nbsp;</li> <li>Experience with Brownfield and Greenfield projects.&nbsp;</li> <li>Working knowledge of engineering software and design tools such as AutoCAD, PDMS, E3D, PDS, MicroStation, or equivalent.&nbsp;</li> <li>Experience reviewing vendor documentation and multidisciplinary design deliverables.&nbsp;</li> <li>Knowledge of construction, commissioning, operations, and maintenance requirements.&nbsp;</li> <li>Experience participating in HAZOP and HAZID studies.&nbsp;</li> <li>Commercial awareness and understanding of project execution requirements.&nbsp;</li> <li>Ability to prepare technical reports, specifications, and engineering calculations.&nbsp;</li> <li>Strong analytical and problem-solving skills.</li></ul><p><strong>Personal attributes:</strong>&nbsp;</p><br><ul> <li>Strong commitment to safety and engineering excellence.&nbsp;</li> <li>Effective verbal and written communication skills.&nbsp;</li> <li>Strong interpersonal and teamwork abilities.&nbsp;</li> <li>Self-motivated, proactive, and delivery-focused.&nbsp;</li> <li>Well-organized with attention to detail.</li></ul> </div>

<p>responsible for monitoring the progress of a project and keeping it on track from a time and budgetary standpoint. Placing the tank Making necessary pipe connections Building a platform for the tank</p>

<p><br></p><ul> </ul> <p> <strong>Key Accountabilities and Responsibilities:</strong> </p> <p> <strong>Executes Assigned Scopes of Work:</strong> </p> <ul> <li>Develop piping engineering deliverables including specifications, calculations, datasheets, technical reports, material requisitions, and engineering studies. </li> <li>Prepare and review piping layouts, GAs, ISOs, plot plans, piping material specifications, line lists, tie-in packages, and support requirements. </li> <li>Ensure all piping engineering activities are performed in accordance with project specifications, company procedures, and applicable international codes and standards. </li> <li>Coordinate with process, mechanical, civil, structural, instrumentation, electrical, and project engineering disciplines. </li> <li>Participate in model reviews and interdisciplinary design reviews. </li> <li>Review and comment on vendor documentation and ensure compliance with project requirements. </li> <li>Provide engineering support during procurement, fabrication, construction, commissioning, and startup activities.</li> <li>Assist with field engineering activities and resolution of site technical queries.</li> <li>Monitor assigned work against project schedules and budgets and provide progress updates.</li> <li>Identify engineering risks and recommend practical solutions. </li> <li>Participate in HAZOP, HAZID, design reviews, constructability reviews, and safety assessments.</li> <li>Promote safe design principles and ensure safety considerations are incorporated into all engineering activities</li> </ul> <p> <strong>Providing discipline expertise:</strong> </p> <ul> <li>Perform piping system design and engineering calculations. </li> <li>Evaluate technical issues and develop effective engineering solutions. </li> <li>Interpret project specifications, client requirements, and industry standards. </li> <li>Support development of piping philosophies, material selection, and stress-related design considerations.</li> <li>Contribute technical expertise during proposal preparation and project execution. </li> <li>Support continuous improvement initiatives, lessons learned, and engineering best practices </li> <li>Assist junior engineers and designers through technical guidance and mentoring.</li> </ul> <p> </p> <p> <strong>Working Relationships:</strong> </p> <p> <strong>Internal </strong> </p> <ul> <li>Maintain effective working relationships with project teams and discipline engineers. </li> <li>Coordinate activities with engineering, procurement, construction, and commissioning personnel. </li> <li>Participate in knowledge sharing and discipline improvement initiatives. </li> <li>Contribute positively to team collaboration and technical problem-solving activities. </li> </ul> <p> <strong>External</strong> </p> <ul> <li>Interface with clients, contractors, vendors, and third-party engineering organizations. </li> <li>Participate in technical meetings and design reviews with stakeholders. </li> <li>Support resolution of vendor and construction-related technical issues.</li> </ul> <p> </p> <p> <strong>Level of Influence and Decision-Making Authority:</strong> </p> <ul> <li>Works independently on routine engineering assignments. </li> <li>Exercises professional judgment in applying engineering principles, standards, and procedures. </li> <li>Responsible for the technical quality and accuracy of assigned deliverables. </li> <li>Provides technical recommendations to project and discipline management. </li> <li>Escalates unusual or high-risk technical matters to senior engineering personnel. </li> <li>May provide technical guidance to graduate engineers, junior engineers, and designers. </li> <li>Responsible for achieving assigned schedule, quality, and cost objectives.</li> </ul><p><strong>Desired Candidate Profile</strong></p><p> <strong>What makes you remarkable? </strong> </p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p> <p> <strong>Expected:</strong> </p> <p> <strong>Minimum Qualifications:</strong> </p> <ul> <li>Bachelor's Degree in Mechanical Engineering or related Engineering discipline. </li> <li>Professional registration or chartership status is desirable.</li> </ul> <p> <strong>Knowledge, Skills and Experience:</strong> </p> <ul> <li>Typically, 5+ years of relevant piping engineering experience in the oil and gas, petrochemical, energy, or industrial sectors. </li> <li>Experience in onshore oil &amp; gas facilities. </li> <li>Familiarity with international industry codes and standards including ASME, API, ASTM, and relevant client specifications. </li> <li>Knowledge of piping materials, piping layout, stress considerations, and plant design principles. </li> <li>Experience with Brownfield and Greenfield projects. </li> <li>Working knowledge of engineering software and design tools such as AutoCAD, PDMS, E3D, PDS, MicroStation, or equivalent. </li> <li>Experience reviewing vendor documentation and multidisciplinary design deliverables. </li> <li>Knowledge of construction, commissioning, operations, and maintenance requirements. </li> <li>Experience participating in HAZOP and HAZID studies. </li> <li>Commercial awareness and understanding of project execution requirements. </li> <li>Ability to prepare technical reports, specifications, and engineering calculations. </li> <li>Strong analytical and problem-solving skills.</li> </ul> <p> <strong>Personal attributes:</strong> </p> <ul> <li>Strong commitment to safety and engineering excellence. </li> <li>Effective verbal and written communication skills. </li> <li>Strong interpersonal and teamwork abilities. </li> <li>Self-motivated, proactive, and delivery-focused. </li> <li>Well-organized with attention to detail.</li> </ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Title- Piping / Mechanical Construction Supervisor&nbsp;<br> Location- Anbar, Iraq<br> Rotation - 6/3</strong> <strong>Role purpose:</strong> Lead and coordinate all <strong>piping &amp; mechanical construction</strong> activities on site, ensuring <strong>safe execution</strong>, <strong>schedule adherence</strong>, and <strong>quality compliance</strong> across the construction-to-commissioning phases.<br> <strong>Must-have responsibilities</strong><ul><li>Manage day-to-day <strong>piping &amp; mechanical construction execution</strong> on site, including <strong>subcontractor supervision</strong> and work-front coordination.</li><li>Ensure work is executed per <strong>Approved For Construction (AFC)</strong> drawings, project specs, and latest document revisions (strong <strong>engineering–site interface</strong>).</li><li>Control key construction interfaces: <strong>free-issue materials</strong>, major equipment/packages receipt and correct installation.</li><li>Drive <strong>HSE compliance</strong>: manage/verify <strong>PTW</strong>, <strong>isolations</strong>, and <strong>LOTO</strong> requirements; ensure safe working practices and hazard controls.</li><li>Monitor <strong>construction progress vs schedule</strong>, report daily status/forecast, and highlight constraints/deviations with corrective actions.</li><li>Ensure <strong>quality compliance</strong>: coordinate with piping/mechanical QA/QC; manage inspection readiness, resolve NCR drivers, and verify subcontractor workmanship.</li><li>Support <strong>mechanical completion / CCMS</strong> completion activities and <strong>commissioning assistance</strong> as required.</li><li>Manage <strong>as-built documentation</strong> from subcontractors.</li></ul><strong>Must-have experience / qualifications</strong><ul><li><strong>Bachelor Degree in Mechanical Engineering</strong> (or closely related).</li><li><strong>10+ years</strong> proven experience as <strong>Piping / Mechanical Supervisor</strong> on <strong>Oil &amp; Gas EPCC projects</strong> (construction through commissioning exposure).</li><li>Strong working knowledge of <strong>PTW</strong>, <strong>LOTO</strong>, isolations, and site safety rules.</li><li>Strong understanding of <strong>piping/mechanical erection</strong>, installation practices, and construction planning/resource allocation.</li><li>Ability to coordinate across disciplines (basic understanding of <strong>civil, E&amp;I, instrumentation</strong> interfaces).</li><li>Strong leadership, contractor management, and communication skills (client/subcontractor/site team).</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Construction Supervisor -Mechanical &amp; Piping-Onsite<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Construction Supervisor -Mechanical &amp; Piping<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Local National</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b><u>Roles and Responsibilities:</u></b></p><br><br><br><p>Specific responsibilities of the Construction Supervisor include:</p><br><br><p>Overall view of the role:</p><br><br><br><ul><li>Contributes to Construction Safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li><li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li><li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li><li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li><li>Coordinate with engineering, QA/QC, and HSE teams to ensure compliance.</li><li>Working with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li><li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li><li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&amp;ID).</li><li>Experience in reading and understanding LOSH, Test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li><li>Coordinate with the Contractor/Subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, Installation, Reinstatement, and Final completion of the subsystem, both Brownfield and Greenfield projects.</li><li>Experience in rotating equipment construction activities. Including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li><li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and enough experience for the piping quality requirements (NDT, PWHT, Etc.).</li><li>Having strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li></ul><br><p><b><u>Accountabilities/Expectations:</u></b></p><br><br><br><ul><li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li><li>Ensure that the project planning is deliverable from Engineering and that Contracts &amp; Procurement aligns with the construction and handover sequences.</li><li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li><li>Ensure to follow the final/approved design during construction.</li><li>Good knowledge of international standards (ASME, API, etc.)</li><li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li></ul><br><p><b><u>Education, Skills &amp; Experience:</u></b></p><br><br><ul><li>BSc., University degree in mechanical.</li></ul><br><p><b><u>Experience and Skillset</u></b></p><br><br><ul><li>Minimum 10-12 years’ Construction experience in Oil and Gas-related projects with strong proof for piping and rotating roles.</li><li>Strong leadership and teambuilding skills; supervisory experience.</li><li>Experience in Static and rotating equipment installation and Alignment.</li><li>Strong software skills, Microsoft Office, document websites, 3D module review, and prefer to have good knowledge of software design (AutoCAD).</li><li>Strong level in English language to communicate properly with the team members and all stakeholders.</li></ul><br><br><br><br><br><br><br> </div>

<p><h4>Job description</h4> <p><strong>Job title:</strong> Construction supervisor - mechanical & piping</p> <p><strong>Company:</strong> KBR</p> <p><strong>Location:</strong> Basra Iraq</p> <p><strong>Employment type:</strong> Full-time, contract</p> <p><strong>Rotation:</strong> 28/28</p> <p><strong>Required nationals:</strong> Local national</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>Specific responsibilities of the construction supervisor include:</p> <p><strong>Overall view of the role:</strong></p> <ul> <li>Contributes to construction safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li> <li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li> <li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li> <li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li> <li>Coordinates with engineering, QA/QC, and HSE teams to ensure compliance.</li> <li>Works with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li> <li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li> <li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&ID).</li> <li>Experience in reading and understanding LOSH, test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li> <li>Coordinates with the contractor/subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, installation, reinstatement, and final completion of the subsystem, both brownfield and greenfield projects.</li> <li>Experience in rotating equipment construction activities including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li> <li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and sufficient experience for the piping quality requirements (NDT, PWHT, etc.).</li> <li>Strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li> </ul> <h4>Accountabilities/expectations</h4> <ul> <li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li> <li>Ensure that the project planning is deliverable from engineering and that contracts & procurement aligns with the construction and handover sequences.</li> <li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li> <li>Ensure to follow the final/approved design during construction.</li> <li>Good knowledge of international standards (ASME, API, etc.).</li> <li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li> </ul> <h4>Education, skills & experience</h4> <p>BSc., university degree in mechanical engineering.</p> <p><strong>Experience and skillset:</strong></p> <ul> <li>Minimum 10-12 years’ construction experience in oil and gas-related projects with strong proof for piping and rotating roles.</li> <li>Strong leadership and teambuilding skills; supervisory experience.</li> <li>Experience in static and rotating equipment installation and alignment.</li> <li>Strong software skills including Microsoft Office, document websites, 3D module review, and preferably good knowledge of software design (AutoCAD).</li> <li>Strong level in English language to communicate properly with the team members and all stakeholders.</li> </ul></p><p></p>