وظائف Halliburton

<p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management. Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Managerer in case of emergency. (10). Control, minimize and monitor flare losses &amp; waste generation. (11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Preferred Experience: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR's, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a multidiscipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>

<p>Under broad direction, as a subject matter expert: Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Assists in supervising other technicians and prioritizes and/or assigns work when needed. Possesses advanced diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Responsible for mentoring junior technicians. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Additional Role Responsibilities: (1). Provide the professional technical Support for Rotating equipment and facilities operation and maintenance services; (2). Maintenance, support and troubleshooting of vibration, lubrication, controls applications / systems of equipment; (3). Mechanical support of manufacturing units across the facility; (4). Responsible of the training and technical development of the Mechanical Maintenance organization; (5). Responsible for the development and control the annual budget for the Mechanical Maintenance organization; (6). Routinely analyze and report expenditures to ensure budget compliance; (7). Participate and advise in developing plans for major shutdowns, construction or alteration projects where mechanical inspections will be critical to the accomplishment of the work; (8). Become personally involved in all repairs during shutdowns to insure a trouble-free start-up. Assume responsible role in start-up of all major rotating equipment after shutdown.</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under broad direction from the Senior Geophysics Advisor and Integrated Asset Management's (IAM) senior management and with support from engineering and operations staff across all Halliburton product service lines (PSL): The Geophysics Advisor works within a senior multi- discipline petrotechnical team to develop and apply advanced techniques in support of the evaluation and development of potentially large, challenging oil and gas field development projects for prospective and/or acquired IAM investments. The Geophysics Advisor will support prospect evaluation and field development work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure and isochron maps, anomaly maps, field pay responses, etc.). Additional responsibilities for this role include supporting IAM senior management in defining standardized, best practice processes to support the systematic, efficient and effective evaluation, well engineering, and field development planning work required as part of the project development process. As part of the IAM formal evaluation process, incumbents will participate in formal workshops with other key Halliburton technical resources in an environment that promotes innovation and input from all participants. In the process, the Geophysics Advisor will develop close working relationships with key technical and managerial staff working in various parts of Halliburton as well as with partner companies. The Geophysics Advisor will also peer review technical work by local asset team members.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires a Bachelor's degree in Geophysics and a minimum of 10 years of experience in Geophysics, which includes experience in seismic reservoir characterization for conventional and unconventional play development, mature field development, and static geologic model building; management experience required.</p>

<p>Under broad direction: Applies comprehensive reliability engineering knowledge to improve the products and services of Halliburton Energy Services (HES). Provides guidance on design risk management activities. Creates new analytical tools and techniques to advance reliability engineering and provides guidance for accelerated life techniques. Develops reliability centered maintenance for equipment and implementation plan. Performs data analysis and recommends reliability improvements based on the analysis. Contributes to Halliburton's Intellectual Property portfolio by filing patent disclosures or authoring and presenting industry technical papers and journals. Provides guidance on training cross-functional groups within the organization. Additional Role Responsibilities: 1 Technical support service of OCTG use in the oilfield onsite, sometimes for provision technical support for OCTG maintenance and storage. 2 Familiar with the use of OCTG performance, and the use of methods, especially the use of process considerations, 3 OCTG technical guidance for into the well process to ensure that the OCTG into the well process is not damaged; 4 Technical data management, set up work record, collect, classify, sort and file the related data of construction well. 5 Followed workshop maintenance, supervise and inspect workshop processing products and services, to ensure the quality of products delivered. 6 Interface with COMPANY on production requirements, reasonably plan and arrange OCTG and workshop service. 7 Responsible for subcontractor management, monitoring process for product and workshop service, and acceptance of products and workshop services.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are acquired through the completion of an undergraduate degree in Engineering and 10 years of related experience or in an operations environment within the oil &amp; gas industry.</p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p>Job Duties</p><p>Under general supervision: The Senior Well Engineering Leader is responsible for more technically complex well designs and process implementation for well proposals, the Well Basis of Design, and Well Operation Programs. May be responsible for supervising less senior Well Engineers . Assures technical integrity of Well Operations planning and execution. Responsible for continuous improvement through lessons learned, timely End-of-Well reports and ensures feedback is incorporated in future operations. Ensures creation and approval of Approval for Expenditure (AFE) and cost control of operations. Ensures risk assessments are conducted to assure a safe and environmentally acceptable operation and forecasts and plans medium and long term needs to meet operational requirements. Coordinates daily morning meetings, anticipates operational changes and needs, and revises plans accordingly. Evaluates results compared to goals and performance targets. Ensures engineering studies are performed to solve recurring problems. Prepares equipment lists and identifies long lead items.</p><p>Additional Role Responsibilities:</p><p>(1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</p><p>(2) Project Execution Responsible for planning, logistics, supervision, and documentation of the execution of well work activities. Work closely with the engineers and Operations Team Managers to make well work decisions/recommendations including selection and optimization of services; materials; fluid systems; operational techniques, operational efficiencies, cost tracking, and management of project risks. Provide input on well programs, including details around HSSE, well control, equipment, contractors, etc.</p><p>(3) HSSE Responsible for ensuring HSSE is integrated in the procedure and execution of completion and well intervention operations. Actively promote HSSE and Sustainable Development (SD) in all activities and ensure compliance with business principles.</p><p>(4) Coaching and Mentoring -- Coach and mentor less experienced team members to deliver best-in-class performance in HSSE, cost, and time.</p><p>(5) Cost and Time Tracking Champion and Manager a team of supervisors in tracking well costs and job timing during execution, including differentiating trouble costs/time from expected costs/time.</p><p>(6) Contract Management Provide input and suggestions on service contracts to enable high performance. Manage contractor services in the field in line with the contracting strategy and the goals of the contract management team. Support contract management as a contract holder is select cases and participate as a member of the contract management team. Serve as a focal point for HSSE management with the contractors and the evaluation of service quality.</p><p>(7) Performance Improvement Responsible for championing operational performance improvement initiatives throughout the well delivery process. Support the implementation of new technologies as part of the performance improvement process. Manager the supervisory team in implementation of opportunities to optimize operations.</p><p>(8) Communication Responsible for maintaining communication and managing by example in ensuring integration with production operations and other support departments.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preference in Petroleum or Mechanical Engineering, and 8+ years of well services experience. Well Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p>Job Duties</p><p>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management.</p><p>Additional Role Responsibilities:</p><ul><li>(1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position;</li><li>(2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized;</li><li>(3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations;</li><li>(4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators;</li><li>(5). Set priorities, assign projects, monitor progress and set standards for a high performing team;</li><li>(6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs;</li><li>(7). Monitor and operate the SAP/CMMS system.</li><li>(8). Contribute and participate in successful completion of plant improvements;</li><li>(9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Manager in case of emergency.</li><li>(10). Control, minimize and monitor flare losses &amp; waste generation.</li><li>(11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management.</li><li>(12). Identify team and individuals limitations and develop contingency plans to address any short fall.</li></ul><p>Qualifications</p><p>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience</p><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61006, Iraq</p><p><br></p><p><strong>Desired Candidate Profile</strong></p><h4>Qualifications</h4>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR s, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience

<p>Job Duties Under direct supervision from the Production Supervisor: The Production Tech specializes in working in office, field, or laboratory recording and analyzing data and writing reports. Fieldwork includes assisting geologists and engineers with electronic, sonic, or nuclear measuring instruments that indicate the potential for oil and gas; gathering and analyzing well and production data; assisting in well optimization and well failure analysis and preparing monthly performance reports for each producing well. Office work includes reporting Key Performance Indicators (KPI) for production, new completes, recompletes and workovers and preparing Weekly Production Report and Up/Down Reports; Weekly Activity Report operations and Flowback Reports for new completes and recompletes. Laboratory work includes assisting geologists and engineers with electronic, sonic, or nuclear measuring instruments that indicate the potential for oil and gas; collecting formation, mud and soil samples and preparing the samples for laboratory analysis; conducting scientific tests on samples to determine content and characteristics; recording data from tests and compiling information from reports, computer databases and other sources; recording data such as well temperatures, pressures, flow rates and watercut and comparing actual productivity to estimates. Additional Role Responsibilities: (1). Plan, coordinate and execute process design, development, validation and documentation in line with company procedures. (2). Support and ensure conformity with current systems, external auditory compliance and accreditations on an on-going basis. (3). Monitory production, operations, maintenance services in plants. (4). Provide the professional technical support services for production equipment and facilities. (5). Support the team goals by providing production knowledge, tracking and optimizing production rates, and ensuring operational best practice methods are followed; (6). Conducts daily internal production reporting and operational summary. (7). Track and identify production deviations and implement corrective measures from wellhead to export; (8). Provide the professional methods and working experience to improve the production volume.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires a high school diploma or equivalent. Undergraduate degree preferred. Requires a minimum 3 years' experience in production operations which includes experience in oil &amp; gas operations. Strong computer skills, particularly with Microsoft software such as Excel, Word, PowerPoint and Outlook are preferable.</p>

<p>Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Assists in supervising other technicians and prioritizes and/or assigns work when needed. Possesses advanced diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Responsible for mentoring junior technicians. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined.</p><p>Additional Role Responsibilities: (1). Provide the professional technical Support for static equipment and facilities operation and maintenance services; (2). Conducts detailed technical evaluations to address issues with equipment and system design, operation and maintenance; (3). Provides pertinent engineering expertise to Root Cause Failure Analysis; (4).Review and approval of mechanical data sheets of static equipment (5).Reviews affiliate, project and contractor deliverables as requested to ensure compliance with project specifications, Design Practices, Static Equipment Toolkit guidance, and best practices. Documents to be reviewed may include Piping &amp; Instrument Diagrams, equipment arrangements, equipment specifications, data sheets, vendor proposals, and technical studies; (6).Participates in design reviews, risk assessments, HAZOPs, vendor qualification, and vendor bid evaluations as requested; (7).Supports functional initiatives and maintains discipline documentation pertinent to Upstream Facilities; (8).Provides technical mentorship to less experienced engineers with emphasis on areas of identified skill gaps; (9).Proactively and continuously grows disciplines technical expertise in pertinent technologies. (10).Maintains current knowledge (e.g. through participation in industry conferences / forums).</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under general supervision: Responsible for HAL contractual operations at the well site. Understands objectives of the well services operation and takes actions required to accomplish the objective. Responsible for reporting and protects the health and safety of employees, contractors, and the general public from harm resulting from operations. Protects the environment from damage resulting from operations. Coordinates work of product services lines and 3rd party subcontractors to meet engineered well design. Supervises day-to-day field operations at the well site. Matrix manager for HSE and logistics personnel on location. Maintains a high profile and leadership in HSE by active participation in HSE audits, inspections and reviews in accordance with the HSE Plan. Participates in and facilitate incident and near miss investigations, Validation of closed corrective actions and audit open items. Responsible for move-in and rig up, rig down and move-out of equipment. Directs well operations processes. Manages field operations to accomplish specified well services objectives within agreed-on time and cost objectives. Prepares a documented 7 day look ahead for equipment, materials, and personnel for the well operations every day.</p><p>Additional Role Responsibilities: (1).In charge of management all the service order related wells; (2).Contact with discipline engineer of Company regarding to the technical issue of Service order; (3).Establish a working relationship and lines of communication with the supervisor to implement overall construction configuration management; (4).Responsible for quantity take-off, control, tracking, reporting and forecasting; (5).Specify the criteria for construction of facilities as required; (6).Review material receiving reports and warehousing to assure delivery of correct materials; (7).Coordinate and monitor the interfaces for data exchange to support the construction plan and the project controls program requirements at the jobsite; (8).Develop and manage the construction quality program; (9).Review Sub-Contractor's proposal for service order; (10).Coordinate with Subcontractors to plan/support construction schedules; (11).Plan and recommend procedures to be implemented by Subcontractor to ensure construction operations are within requirements of engineering design and specifications; (12).Coordinate subcontract activities to ensure materials, equipment and quality comply with design plans and specifications; (13).Preparation of all required related to QA/QC documentation; (14).Management and coordinate of local employee.</p><p><strong>Desired Candidate Profile</strong></p><p>Qualifications Position requires current IADC or IWCF supervisory well control certification. Requires a high school diploma and a minimum of five years of rig site experience with at least three years of operational management experience. Undergraduate degree is preferred.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under direct supervision from the Production Supervisor: The Production Tech specializes in working in office, field, or laboratory recording and analyzing data and writing reports. Fieldwork includes assisting geologists and engineers with electronic, sonic, or nuclear measuring instruments that indicate the potential for oil and gas; gathering and analyzing well and production data; assisting in well optimization and well failure analysis and preparing monthly performance reports for each producing well. Office work includes reporting Key Performance Indicators (KPI) for production, new completes, recompletes and workovers and preparing Weekly Production Report and Up/Down Reports; Weekly Activity Report operations and Flowback Reports for new completes and recompletes. Laboratory work includes assisting geologists and engineers with electronic, sonic, or nuclear measuring instruments that indicate the potential for oil and gas; collecting formation, mud and soil samples and preparing the samples for laboratory analysis; conducting scientific tests on samples to determine content and characteristics; recording data from tests and compiling information from reports, computer databases and other sources; recording data such as well temperatures, pressures, flow rates and watercut and comparing actual productivity to estimates. Additional Role Responsibilities: (1). Plan, coordinate and execute process design, development, validation and documentation in line with company procedures. (2). Support and ensure conformity with current systems, external auditory compliance and accreditations on an on-going basis. (3). Monitory production, operations, maintenance services in plants. (4). Provide the professional technical support services for production equipment and facilities. (5). Support the team goals by providing production knowledge, tracking and optimizing production rates, and ensuring operational best practice methods are followed; (6). Conducts daily internal production reporting and operational summary. (7). Track and identify production deviations and implement corrective measures from wellhead to export; (8). Provide the professional methods and working experience to improve the production volume.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires a high school diploma or equivalent. Undergraduate degree preferred. Requires a minimum 3 years' experience in production operations which includes experience in oil &amp; gas operations. Strong computer skills, particularly with Microsoft software such as Excel, Word, PowerPoint and Outlook are preferable. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under general supervision: The Senior Well Engineering Leader is responsible for more technically complex well designs and process implementation for well proposals, the Well Basis of Design, and Well Operation Programs. May be responsible for supervising less senior Well Engineers . Assures technical integrity of Well Operations planning and execution. Responsible for continuous improvement through lessons learned, timely End-of-Well reports and ensures feedback is incorporated in future operations. Ensures creation and approval of Approval for Expenditure (AFE) and cost control of operations. Ensures risk assessments are conducted to assure a safe and environmentally acceptable operation and forecasts and plans medium and long term needs to meet operational requirements. Coordinates daily morning meetings, anticipates operational changes and needs, and revises plans accordingly. Evaluates results compared to goals and performance targets. Ensures engineering studies are performed to solve recurring problems. Prepares equipment lists and identifies long lead items.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Project Execution - Responsible for planning, logistics, supervision, and documentation of the execution of well work activities. Work closely with the engineers and Operations Team Managers to make well work decisions/recommendations including selection and optimization of services; materials; fluid systems; operational techniques, operational efficiencies, cost tracking, and management of project risks. Provide input on well programs, including details around HSSE, well control, equipment, contractors, etc. (3) HSSE - Responsible for ensuring HSSE is integrated in the procedure and execution of completion and well intervention operations. Actively promote HSSE and Sustainable Development (SD) in all activities and ensure compliance with business principles. (4) Coaching and Mentoring -- Coach and mentor less experienced team members to deliver best-in-class performance in HSSE, cost, and time. (5) Cost and Time Tracking - Champion and Manager a team of supervisors in tracking well costs and job timing during execution, including differentiating trouble costs/time from expected costs/time. (6) Contract Management - Provide input and suggestions on service contracts to enable high performance. Manage contractor services in the field in line with the contracting strategy and the goals of the contract management team. Support contract management as a contract holder is select cases and participate as a member of the contract management team. Serve as a focal point for HSSE management with the contractors and the evaluation of service quality. (7) Performance Improvement - Responsible for championing operational performance improvement initiatives throughout the well delivery process. Support the implementation of new technologies as part of the performance improvement process. Manager the supervisory team in implementation of opportunities to optimize operations. (8) Communication - Responsible for maintaining communication and managing by example in ensuring integration with production operations and other support departments.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preference in Petroleum or Mechanical Engineering, and 8+ years of well services experience. Well Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under broad direction, as a subject matter expert: Performs preventive/predictive maintenance and repair of a variety of mechanical equipment relative to their assigned location. Assists in supervising other technicians and prioritizes and/or assigns work when needed. Possesses advanced diagnostic/troubleshooting knowledge and skills. Performs advanced function testing to verify equipment readiness after maintenance. Must be proficient in understanding/interpreting mechanical schematics/drawings/prints. Ability to identify correct parts and locate them in a system search to enable accurate procurement of spares. Ensures adherence, accurate input, and maintenance of data into Halliburton's system of record. This role is responsible for following specific and detailed work processes within the Halliburton Management System (HMS) during daily job activities. Responsible for mentoring junior technicians. Responsible for ensuring duties are performed in a safe, efficient, and effective manner. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Consequences of error are easily measured and can be confined. Additional Role Responsibilities: (1). Provide the professional technical Support for Rotating equipment and facilities operation and maintenance services; (2). Maintenance, support and troubleshooting of vibration, lubrication, controls applications / systems of equipment; (3). Mechanical support of manufacturing units across the facility; (4). Responsible of the training and technical development of the Mechanical Maintenance organization; (5). Responsible for the development and control the annual budget for the Mechanical Maintenance organization; (6). Routinely analyze and report expenditures to ensure budget compliance; (7). Participate and advise in developing plans for major shutdowns, construction or alteration projects where mechanical inspections will be critical to the accomplishment of the work; (8). Become personally involved in all repairs during shutdowns to insure a trouble-free start-up. Assume responsible role in start-up of all major rotating equipment after shutdown.</p><p><strong>Desired Candidate Profile</strong></p><p>A high school diploma or equivalent and 5 years of experience in related mechanical fields are required. A technical school certification is preferred. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<h3>Job Duties</h3>Under general supervision: From Surface Facilities IAM Project Manager or Project/Asset Manager, supervises the operations on the field projects for a given project or several projects in an asset. Establishes scope of work with site customer and site representative. Checks design documentation for adequacy to specific site conditions and agreed scope of work. Proposes engineering adjustments to site condition as required. Visits site before and during the project and verifies that applied project procedures by contractor will allow compliance of technical requirements and timely completion. Additional responsibilities include verifying project advance payment and contractor resource allocation; commenting and proposing adjustments to comply with project schedule and budget; verifying safety conditions at site and stop work if required; informing management and personnel of unsafe practice. Also participates in site project meetings with contractor and customer, and coordinates site inspection by QA/QC, HSE and commissioning teams in a timely matter. Prepares periodic reports for upper management. Additional Role Responsibilities: (1). Supervises the activities of assigned personnel at BIN-UMAR &amp;SINDBAD Stations well site. Performs supervisory duties at the level established by management for the position; (2). Supervises all activities under the Company Health, Safety and Environment (HSE) policies and procedures are fully implemented and adhered to, so that Loss Prevention is maximized; (3). Drive innovative solutions to operating issues, ensure accurate measurement and optimize operations; (4). Prepare, maintain, and execute terminal operating and capital budgets, establish and monitor key performance indicators; (5). Set priorities, assign projects, monitor progress and set standards for a high performing team; (6). Organization and Cooperate with maintenance team do the PM/CM and troubleshooting jobs; (7). Monitor and operate the SAP/CMMS system. (8). Contribute and participate in successful completion of plant improvements; (9). Performs E.R.T. responsibilities as stipulated in Loss Control Procedures and acts as an emergency response team Manager in case of emergency. (10). Control, minimize and monitor flare losses &amp; waste generation. (11). Coordinates with Royal commission and other outside party for flare losses &amp; waste management. (12). Identify team and individuals limitations and develop contingency plans to address any short fall. <p>Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Operations Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience. Apply Now</p><p><strong>Desired Candidate Profile</strong></p><h3>Qualifications</h3>Requires undergraduate degree in Engineering or similar discipline, and preferably a minimum of five (5) years of progressive experience in planning, design and construction of surface facilities for oil fields. Relevent experience is highliy desirable: Minimum of 10-15 years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry. Recognized International Qualifications (NVQ, C&amp;G, OPITO etc) Valid Emergency Response competence CMMS/SAP Experience Coaching &amp; Development Experience (Competence Assessors preferred) Commissioning experience Experience from similar challenging environments. (Wells experience a must for production operations personnel) Valid trade competencies (Complex, Flange Management, ESR's, Small bore tubing etc.) Internationally recognized driving license Good English skills, Arabic speaking advantageous ISSOW/PTW experience

<p>Applies comprehensive reliability engineering knowledge to improve the products and services of Halliburton Energy Services (HES). Provides guidance on design risk management activities. Creates new analytical tools and techniques to advance reliability engineering and provides guidance for accelerated life techniques. Develops reliability centered maintenance for equipment and implementation plan. Performs data analysis and recommends reliability improvements based on the analysis. Contributes to Halliburton's Intellectual Property portfolio by filing patent disclosures or authoring and presenting industry technical papers and journals. Provides guidance on training cross-functional groups within the organization. Additional Role Responsibilities: (1) Technical support service of OCTG use in the oilfield onsite, sometimes for provision technical support for OCTG maintenance and storage. (2) Familiar with the use of OCTG performance, and the use of methods, especially the use of process considerations, (3) OCTG technical guidance for into the well process to ensure that the OCTG into the well process is not damaged; (4) Technical data management, set up work record, collect, classify, sort and file the related data of construction well. (5) Followed workshop maintenance, supervise and inspect workshop processing products and services, to ensure the quality of products delivered. (6) Interface with COMPANY on production requirements, reasonably plan and arrange OCTG and workshop service. (7) Responsible for subcontractor management, monitoring process for product and workshop service, and acceptance of products and workshop services.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are acquired through the completion of an undergraduate degree in Engineering and 10 years of related experience or in an operations environment within the oil &amp; gas industry.</p>

<p>Under broad direction from the Senior Geophysics Advisor and Integrated Asset Management's (IAM) senior management and with support from engineering and operations staff across all Halliburton product service lines (PSL): The Geophysics Advisor works within a senior multi- discipline petrotechnical team to develop and apply advanced techniques in support of the evaluation and development of potentially large, challenging oil and gas field development projects for prospective and/or acquired IAM investments. The Geophysics Advisor will support prospect evaluation and field development work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure and isochron maps, anomaly maps, field pay responses, etc.). Additional responsibilities for this role include supporting IAM senior management in defining standardized, best practice processes to support the systematic, efficient and effective evaluation, well engineering, and field development planning work required as part of the project development process. As part of the IAM formal evaluation process, incumbents will participate in formal workshops with other key Halliburton technical resources in an environment that promotes innovation and input from all participants. In the process, the Geophysics Advisor will develop close working relationships with key technical and managerial staff working in various parts of Halliburton as well as with partner companies. The Geophysics Advisor will also peer review technical work by local asset team members.</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61006, Iraq</p><p>Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience. Apply Now</p><p><strong>Desired Candidate Profile</strong></p><p>Requires a Bachelor's degree in Geophysics and a minimum of 10 years of experience in Geophysics, which includes experience in seismic reservoir characterization for conventional and unconventional play development, mature field development, and static geologic model building; management experience required.</p><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p>Under direct supervision: The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p>

<p>The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p>Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p><p>(2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time. Accountabilities/ Expectations : Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations. Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence. Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a discipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>