وظائف مهندس تصميم ميكانيكي في العراق

<p>Managing the office side of project execution on a day-to-day basis: ensuring sites have the materials, machinery, and approvals they need before they are required, and converting drawings, specifications, and bill of quantities into actionable, approved information; measuring what has been completed, documenting, certifying, and uploading it in the interim statements so the company receives its full dues on time. This role is the liaison between sites, suppliers, and the client consultant, and conveys this liaison in English.</p><p><strong>&nbsp; Tasks and responsibilities &nbsp;</strong></p><p><strong>First: Office logistics and procurement support</strong></p><p>▪&nbsp;&nbsp;&nbsp; Consolidate material requests from all sites into a single organized purchase plan, in sequence of the project schedule, rather than processing each request separately.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical RFIs and RFQs, and obtain at least three quotes for each material or service of significant value.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical and financial comparison tables, verify each quote against specifications, and raise recommendations to management for award.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare internal purchase requests, follow up on issued purchase orders, fix delivery dates, and expedite any supplier that is delayed.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a material tracking log — what was requested, in transit, delivered, and still pending — and circulate weekly.</p><p>▪&nbsp;&nbsp;&nbsp; Identify long lead-time materials at the start of each project, and notify management in writing of any material threatening its planned delivery schedule.</p><p>▪&nbsp;&nbsp;&nbsp; Coordinate transport, hire machinery, and equipment movement between sites, and secure related permits.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of machinery and equipment: location, operating hours, fuel consumption, maintenance dates, and certificate validity.</p><p>▪&nbsp;&nbsp;&nbsp; Control minimum stock levels of consumables and monitor their distribution to sites against signed requests.</p><p><strong>Second: Delegation of works from the technical office</strong></p><p>▪&nbsp;&nbsp;&nbsp; Review drawings, specifications, and BOQs before work starts, raise RFI on any conflict to be resolved at the office, not on site.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare as-built (Shop Drawings) and As-Built drawings, reinforcement schedules, and cutting lists.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare and submit material submittals with their technical data, and maintain a log of their status and dates.</p><p>▪&nbsp;&nbsp;&nbsp; Issue the latest approved edition of each drawing to site, and withdraw obsolete editions from circulation.</p><p>▪&nbsp;&nbsp;&nbsp; Compile quantities from drawings and compare with the BOQ; define additional works before execution, not after.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare method statements, ITPs, and material approval requests.</p><p>▪&nbsp;&nbsp;&nbsp; Review daily and weekly site reports, update progress against the schedule, and raise variances with reasons.</p><p><strong>Third: Measurement, interim payments, and cost control</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare interim monthly progress certificates: measurement sheets, quantities, supporting documents, and a pictorial record, submitted on the contractual date.</p><p>▪&nbsp;&nbsp;&nbsp; Verify subcontractor interim payments against actual billed works, and certify only what is proven.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare change orders and extension requests with supporting documents and cost analysis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a comparison of actual cost vs budget for each item in the BOM and escalate any overruns when they occur, not at project close.</p><p>▪&nbsp;&nbsp;&nbsp; Reconcile material consumption with theoretical quantities from drawings and report waste or loss.</p><p><strong>Fourth: Subcontractors and suppliers</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare scopes of work for subcontractors and RFQ packages, and compare bids on a comparable basis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain approved suppliers and subcontractors lists, with contact details, prices, and past performance records.</p><p>▪&nbsp;&nbsp;&nbsp; Monitor validity of subcontractor insurance and bonds, registrations, and work permits, and provide warnings before expiry.</p><p><strong>Fifth: Planning and reporting</strong></p><p>▪&nbsp;&nbsp;&nbsp; Maintain baseline schedule and update actual progress on agreed dates (MS Project or Primavera P6).</p><p>▪&nbsp;&nbsp;&nbsp; Prepare weekly and monthly progress reports, including the cumulative progress curve (S-Curve), labor and equipment curves, and pictorial log.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of action items arising from client, consultant, and internal meetings, and follow through to closure.</p><p>▪&nbsp;&nbsp;&nbsp; Contribute to preparing tender timelines, method of execution, and resource schedules accompanying bids.</p><p><strong>Sixth: Documentation and correspondences in English</strong></p><p>▪&nbsp;&nbsp;&nbsp; Draft technical correspondences, RFIs, approvals, transmittals, and progress reports in English with sound technical terminology.</p><p>▪&nbsp;&nbsp;&nbsp; Attend meetings with clients and consultants, present the technical position, and prepare meeting minutes.</p><p>▪&nbsp;&nbsp;&nbsp; Control project documentation: numbering, transmittal log, drawing register, and archiving all outgoing and incoming items in an organized manner.</p><p>▪&nbsp;&nbsp;&nbsp; Note: Company clients are international entities and organizations, and their contracts, specifications, and correspondences are in English only; thus English writing proficiency is a mandatory requirement for this role, not an added bonus.</p><p><strong>&nbsp; Qualifications and experience &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Bachelor’s degree in Civil Engineering (preferred), or Electrical or Mechanical Engineering, from a recognized university.</p><p>▪&nbsp;&nbsp;&nbsp; Valid membership in the Engineers Syndicate or equivalent in the work country.</p><p>▪&nbsp;&nbsp;&nbsp; Four (4) years of experience or more with a contracting company in the technical office or in project execution; design office experience alone is not a substitute.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in English speaking and writing — mandatory. Arabic is the daily language for site coordination.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in AutoCAD, advanced Excel, Word, and MS Project or Primavera P6; familiarity with Revit and BIM systems is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to quantify accurately and read civil, structural, and MEP drawings and specifications.</p><p>▪&nbsp;&nbsp;&nbsp; Practical knowledge of FIDIC contracts and the structure of BOQs and certifying interim payments is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Valid driving license and willingness to travel to sites.</p><p><strong>&nbsp; Personal skills and competencies &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Numerical accuracy — this role deals with quantities that translate into money, and any miscalculation will cost later.</p><p>▪&nbsp;&nbsp;&nbsp; Organizational ability to manage multiple projects concurrently without neglecting any.</p><p>▪&nbsp;&nbsp;&nbsp; Proactive rather than reactive: procurement and submission ahead of need, not after work stops due to shortage.</p><p>▪&nbsp;&nbsp;&nbsp; Clear and proper English writing, enabling communication with the consultant without rephrasing the letter.</p><p>▪&nbsp;&nbsp;&nbsp; Discretion in dealing with prices, costs, profit margins, and supplier terms.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to stand firm on a technical position under client or consultant pressure, and escalate to management instead of yielding.</p><p><strong>&nbsp;</strong></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Mechanical Engineer<br><br><span><u><b>Lead Mechanical Engineer</b></u></span><b>EFLD35 - Principal Technical Professional - Field Engineering</b><br>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.<b><u>Responsibilities:</u> </b>• Day to day delivery of Mechanical Engineering support for site operations.• Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.• Collaborates with Central Engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.• Promotes a culture of open safety reporting and continuous improvement.• Provides immediate front line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team.• Ensures asset Mechanical Engineering risks (both static and rotating) are understood, controlled, managed and reduced.• Participates in a variety of asset and project risk assessments• Input into anomaly assessment and resolution plans.• Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all Safe Operating Limit excursions.• Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.• Provides Mechanical support to technical MoCs and Engineering Queries• Acts as technical interface with Projects and Modifications organisation, including development of Statement of Requirements (SOR) and Project Initiation Requests (PIRs) and Decision Support Packages (DSP)• Supports delivery of Production Efficiency Improvement and Defect Elimination processes (including simple investigations for deferrals and vulnerabilities)• Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.• Performs follow-up actions and observations from self-verification checks that are related to Mechanical Engineering• Participates in Start Up Readiness and Assurance Reviews• Provides coaching to junior engineers.<br><u><b>Experience, Qualifications &amp; Key Skills</b></u>• Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)• Professional (Chartered) Engineer Preferred• Technical degree in Mechanical Engineering or allied engineering subject.• Experience in previous asset engineering / operations support engineering role• Practical exposure to production facilities• Excellent communication, interpersonal and coaching skills• Strong bias for being proactive and getting results• Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.• Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results• Skilled in behavior change management<br><u><b>Preferred Qualifications:</b></u><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;<br> &nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;</p><br><p><i><strong>#Wood #Iraq #Basra #Senior Commissioning Engineer&nbsp;</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Senior Commissioning Engineer&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production.&nbsp;</p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities.&nbsp;</p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives/Project context:</u></strong></p><br><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul> <li><strong>Monitoring &amp; driving</strong>: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</li> <li><strong>Acceleration</strong>: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</li> <li><strong>Methodology</strong>: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</li> <li><strong>Documentation</strong>: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</li> <li><strong>Coordination</strong>: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</li> <li><strong>Reporting</strong>: Run daily and weekly review meetings with Construction, CSU and Company Representative.</li> <li><strong>Handover</strong>: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.<br> &nbsp;</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</li></ul><p><strong>Experience:</strong></p><br><ul> <li><strong>Experience</strong>: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</li> <li><strong>Projects</strong>: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</li> <li><strong>Methodology</strong>: knowledge of OPERCOM and Orbit is a plus.</li> <li><strong>Environment</strong>: Previous experience working for a major international operator and managing multi-discipline contractors.</li></ul><p><strong>Technical Skills:</strong></p><br><ul> <li>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</li> <li>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</li> <li>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</li> <li>Proficiency with completion management tools (ICAPS or equivalent).</li></ul><p><strong>Personal Qualities:</strong></p><br><ul> <li><strong>Leadership</strong>: Ability to challenge contractors and enforce priorities.</li> <li><strong>Adaptability:</strong> Comfort in fast-track, multicultural and high-pressure environments.</li> <li><strong>Rigor</strong>: Strong reporting discipline, documentation rigor and clear communication.</li> <li><strong>Diplomacy</strong>: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</li></ul><p><strong>Languages:</strong></p><br><ul> <li>Fluent professional English (mandatory).</li> <li>French appreciated. Arabic is a plus.</li></ul><p><strong>Conditions:</strong></p><br><ul> <li>Site-based assignment in Iraq, Rotational.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior CWI Engineer<br><br>Position Details<ul><li>Position Title: CWI Senior Engineer</li><li>Department: Wells</li><li>Location: Majnoon Oil Field – Basra, Iraq</li><li>Reports to: CWI Engineering Team Lead</li><li>Direct Reports: None</li></ul>1. Role Purpose<p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p><br><br>2. Key ResponsibilitiesHSSE &amp; Well Integrity<ul><li>Champion a proactive safety culture with Zero Harm.</li><li>Conduct site safety visits, audits, and toolbox talk reviews.</li><li>Ensure compliance with well integrity standards such as NORSOK D‑010</li><li>Ensure engineering designs comply with HSSE policies, Life-Saving Rules, and well integrity guidelines.</li><li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li><li>Support incident investigations by providing technical analysis and recommendations.</li></ul>Program Development &amp; Technical Assurance<ul><li>Prepare and review Completion Programs, Workover Programs, and Intervention Procedures.</li><li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li><li>Ensure engineering designs comply with well integrity standards and operational requirements.</li><li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li></ul>Operational Support &amp; Problem Solving<ul><li>Provide real-time engineering support to wellsite supervisors during operations.</li><li>Analyze operational challenges and propose technical solutions.</li><li>Perform pre-job and post-job reviews to ensure procedural compliance.</li><li>Support SIMOPS planning and coordination with Production, Subsurface, and Drilling teams.</li></ul>Cost &amp; Schedule Control<ul><li>Support development of budgets, forecasts, and AFE inputs.</li><li>Monitor job efficiency, performance, and operational KPIs.</li><li>Identify cost‑saving opportunities without compromising safety or quality.</li></ul>Contractor &amp; Performance Management<ul><li>Lead technical interface with service companies and contractors.</li><li>Evaluate technical proposals, equipment specifications, and new technologies.</li><li>Support tendering, technical evaluations, scopes of work, and contract management.</li><li>Monitor service quality and ensure alignment with engineering requirements.</li></ul>Reporting &amp; Governance<ul><li>Review technical proposals from service companies and ensure alignment with operational requirements.</li><li>Participate in contractor performance reviews and technical evaluations.</li><li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li></ul>3. Qualifications &amp; Experience<ul><li>Bachelor’s degree in Petroleum, Mechanical, or related Engineering discipline.</li><li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li><li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li><li>Strong experience leading CWI engineering teams in high‑activity onshore fields.</li><li>Comprehensive understanding of well integrity standards (e.g., NORSOK D‑010), well control, and barrier management.</li><li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li><li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li><li>Experience in Iraq/Majnoon preferred.</li><li>Fluency in English; Arabic is an advantage.</li></ul>4. Core Competencies<ul><li>CWI Technical Mastery</li><li>Well Integrity &amp; Risk Management</li><li>Engineering &amp; HSSE Leadership</li><li>Performance Management &amp; Continuous Improvement</li><li>Cross‑Functional Collaboration</li><li>Contractor &amp; Stakeholder Management</li><li>Communication &amp; Technical Reporting</li></ul><br><p>Approved By: Steven Hendry</p><br><br><br><p>Position: Wells Manager</p><br><br><br><p>Date: 03 Mar 2026</p><br><br><br><br><br> </div>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Design, install, commission, and maintain chilled &amp; frozen refrigeration systems ✅ Diagnose and resolve refrigeration system faults and technical issues ✅ Perform preventive and corrective maintenance to ensure optimal performance ✅ Monitor system efficiency and recommend energy-saving improvements ✅ Ensure compliance with safety regulations and industry standards ✅ Coordinate with clients, contractors, and project teams ✅ Prepare maintenance reports and technical documentation</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>✔ Bachelor's Degree/Diploma in Mechanical Engineering, Refrigeration Engineering, or a related field ✔ Proven experience with commercial or industrial chilled &amp; frozen refrigeration systems ✔ Strong knowledge of compressors, condensers, evaporators, cold rooms, and refrigeration controls ✔ Experience with ammonia (NH₃) and/or Freon-based systems is an advantage ✔ Ability to read technical drawings and troubleshoot complex refrigeration systems</p><p></p></section>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Applying and following the client contractual QHSE obligations, PSGS’ QHSE policy and procedures.</p><p>• Maintaining the integrity of the ISO Management Documentation System and standards of ISO 9001, ISO 14001, ISO 22000, &amp; ISO 45001.</p><p>• Maintaining, repairing and installing plumbing and related fixtures and components, as well as appliances and trims.</p><p>• Repairing piping of various sizes and types.</p><p>• Checking safety equipment and replacing components such as washers, gaskets and filters.</p><p>• Inspecting, repairing or replacing pumps, valves and boiler systems.</p><p>• Monitoring work done by outside contractors for adherence to Plumbing Code Requirements and reporting back to direct manager.</p><p>• Installing supports and hangers for pipes, fixtures and equipment.</p><p>• Assembling and installing valves and fittings.</p><p>• Installing, repairing and maintaining water treatment equipment, piping and controls.</p><p>• Testing pipe systems and fixtures for leaks.</p><p>• Ensuring all installations, repairing and maintenance meet the requirements of the appropriate codes.</p><p>• Maintaining good relationship with the client to accomplish ongoing tasks in a timely manner.</p><p>• Ensuring all installations, repairs and maintenance meet environmental protection requirements.</p><p>• Maintaining appropriate service and repair records.</p><p>• Performing preventive/corrective maintenance and call-off activities on daily, weekly and monthly basis and ensuring that the company avoids any liquidated damages.</p><p>• Controlling the inventory for related equipment parts and supplies.</p><p>• Preparing Permit to Work and daily/weekly/monthly reports and sharing them with the management.</p><p>• Preparing estimation for call-off works and sharing it with the management.</p><p>• Coordinating with the client on regular basis for related works and assisting in completing the third-party request.</p><p>• Performing other duties as directed.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>·&nbsp;&nbsp;&nbsp;Diploma in Mechanical or Trade Certificate or a similar discipline</p><p>·&nbsp;&nbsp;&nbsp;5+ years in a similar role, Middle East experience preferred</p><p>·&nbsp;&nbsp;&nbsp;Must understand regulatory compliance and be able to maintain and submit any documentation required</p><p>·&nbsp;&nbsp;&nbsp;Fluent in English, Arabic is an added value</p><p>·&nbsp;&nbsp;&nbsp;Computer literate</p><p><br></p></div>

<p>Requirements &amp; Summary</p><ul><li>Skills : Process Management , Process Engineer</li><li>Other Skills : Process Safety Engineer, Safety Engineer, QAR, RAM, FEED, detailed design, safety-critical systems, process safety and risk management</li><li>Experience : 20 + Years</li><li>Education : Bachelors/3-5 yr Degree</li><li>Employment Type : Full Time Salaried Employee</li><li>Location : Iraq, Iraq</li></ul><p>Qualifications and Experience</p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li></ul><p>Competencies:</p><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul><p>The Senior Process Safety Engineer is responsible for the governance and management of all process safety, risk management, and loss prevention activities throughout the full lifecycle of the integrated project. Acting on behalf of the Owner within the PMT, this role ensures that safety considerations are embedded in site selection, layout development, FEED, detailed design, construction, commissioning, and start-up. The Senior Process Safety Engineer oversees all safety studies, risk assessments, and safety-related design reviews, and ensures alignment with international standards, regulatory requirements, and Owner safety philosophy. The role includes oversight of PMC safety resources and coordination of safety inputs across all contractors and licensors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li><li>Competencies:</li><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul></ul>

<p>The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.</p><p>Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.</p>

<p>The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.</p><p>Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Job Summary:</p><p>The BIM/Design Coordinator is responsible for coordinating all project design disciplines including</p><p>Architectural, Structural, and MEP to ensure fully coordinated, clash-free, accurate, and constructible drawings</p><p>are issued for construction.</p><p>The role acts as the central technical coordination point between consultants, contractors, suppliers, and</p><p>internal project teams to minimize design conflicts, delays, RFIs, and rework during construction.</p><p>The BIM/Design Coordinator manages design workflows, drawing control, interdisciplinary coordination, BIM</p><p>processes, and technical communication throughout the project lifecycle.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>Primary Duties and Responsibilities:</p><p><br></p><p>Design Coordination</p><p> Coordinate Architectural, Structural, and MEP drawings and models.</p><p> Review all consultant drawings for completeness, consistency, constructability, and</p><p>clashes.</p><p> Ensure all disciplines are aligned before issuance for construction.</p><p> Identify design conflicts and coordinate resolutions with consultants.</p><p> Conduct technical coordination meetings with all design stakeholders.</p><p><br></p><p>BIM Coordination</p><p> Manage BIM coordination process using Revit, Navisworks, and BIM 360/ACC.</p><p> Perform clash detection and issue clash reports.</p><p> Coordinate federated BIM models from all disciplines.</p><p> Ensure BIM models comply with project standards and LOD requirements.</p><p><br></p><p>Drawing Management &amp; Document Control</p><p> Maintain master drawing register.</p><p> Ensure proper revision control and drawing status tracking. Verify that only latest approved drawings are issued to site teams.</p><p> Track IFC, shop drawings, and as-built drawings.</p><p><br></p><p>Technical Review &amp; Constructability</p><p> Review consultant drawings for constructability.</p><p> Identify impractical or conflicting design details before execution.</p><p> Support resolution of RFIs and technical queries.</p><p><br></p><p>Site Coordination Support</p><p> Assist construction teams in interpreting design documents.</p><p> Participate in site inspections and technical meetings.</p><p> Support resolution of unforeseen site clashes.</p><p><br></p><p>Design Change Management</p><p> Track and document all design changes.</p><p> Assess impact of design revisions on cost, schedule, and construction.</p><p> Maintain change logs and coordination records.</p><p><br></p><p>Reporting &amp; Documentation</p><p> Prepare weekly coordination reports.</p><p> Maintain clash logs and RFI logs.</p><p> Coordinate communication between consultants and stakeholders.</p><p><br></p><p>Qualifications</p><p> Bachelor’s Degree in Civil Engineering, Architectural Engineering, or MEP Engineering.</p><p> 4+ years in construction design coordination or BIM coordination.</p><p> Experience in residential/building construction projects.</p><p> Experience coordinating Architectural, Structural, and MEP systems.</p><p> Experience with consultant and contractor coordination.</p><p><br></p></div>