وظائف مهندس ميكانيكا معدات ثقيلة

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>A mechanical installer uses a set of structures to maintain machinery. The primary responsibilities of this position are assembling, installing, dismantling, troubleshooting, and conducting repairs on machinery. Assisting the mechanical engineer with mechanical design and maintenance tasks. Installing and performing diagnostic tests on mechanical systems. Developing and implementing mechanical maintenance plans to prevent costly equipment breakdowns. Troubleshooting mechanical malfunctions and breakdowns, as well as performing repairs. Documenting processes and maintaining mechanical service records. Monitoring the availability of parts and replenishing supplies. Optimizing mechanical efficiency by adjusting machinery and equipment settings.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Construction Supervisor -Mechanical &amp; Piping-Onsite<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Construction Supervisor -Mechanical &amp; Piping<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Local National</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b><u>Roles and Responsibilities:</u></b></p><br><br><br><p>Specific responsibilities of the Construction Supervisor include:</p><br><br><p>Overall view of the role:</p><br><br><br><ul><li>Contributes to Construction Safety by reducing site exposure through modularization, standardization, and maximizing off-plot construction.</li><li>Contributes to developing brownfield/greenfield construction strategies and planning initiatives for project opportunities pre-FID.</li><li>Focuses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (as per the instruction) from the construction lead and the construction manager on ways to improve the productivity metrics.</li><li>Identifies and monitors brownfield/greenfield construction planning initiatives for approved projects post-FID.</li><li>Coordinate with engineering, QA/QC, and HSE teams to ensure compliance.</li><li>Working with the construction mechanical and piping lead and the construction manager to effectively execute construction deliverables for the project.</li><li>Ability to effectively work on more than one project at a time and identify and resolve site issues efficiently.</li><li>Experience in reading and understanding construction drawings (ISOs, GAD, and P&amp;ID).</li><li>Experience in reading and understanding LOSH, Test packs, hydrotesting, flushing, and all pre-commissioning requirements.</li><li>Coordinate with the Contractor/Subcontractor's day-to-day mechanical and piping construction activities at site, assembly, torquing, Installation, Reinstatement, and Final completion of the subsystem, both Brownfield and Greenfield projects.</li><li>Experience in rotating equipment construction activities. Including but not limited to the installation, managing the quality of the executed work, and alignment requirements till the mechanical completion stage.</li><li>Wide experience in static mechanical construction activities, including but not limited to piping fabrication, good knowledge of preparing piping MTOs, weld maps, and enough experience for the piping quality requirements (NDT, PWHT, Etc.).</li><li>Having strong experience in shutdown requirements, including but not limited to tie-ins and hook-up spools.</li></ul><br><p><b><u>Accountabilities/Expectations:</u></b></p><br><br><br><ul><li>Coordinate with all the team members, follow up daily with the construction lead he will be assigned to and the construction manager.</li><li>Ensure that the project planning is deliverable from Engineering and that Contracts &amp; Procurement aligns with the construction and handover sequences.</li><li>Ensure designs optimally use cold work, modularization, and off-plot construction to minimize on-site HSSE exposure.</li><li>Ensure to follow the final/approved design during construction.</li><li>Good knowledge of international standards (ASME, API, etc.)</li><li>Strong understanding of safety/HSE regulations, procedures, and PTW system.</li></ul><br><p><b><u>Education, Skills &amp; Experience:</u></b></p><br><br><ul><li>BSc., University degree in mechanical.</li></ul><br><p><b><u>Experience and Skillset</u></b></p><br><br><ul><li>Minimum 10-12 years’ Construction experience in Oil and Gas-related projects with strong proof for piping and rotating roles.</li><li>Strong leadership and teambuilding skills; supervisory experience.</li><li>Experience in Static and rotating equipment installation and Alignment.</li><li>Strong software skills, Microsoft Office, document websites, 3D module review, and prefer to have good knowledge of software design (AutoCAD).</li><li>Strong level in English language to communicate properly with the team members and all stakeholders.</li></ul><br><br><br><br><br><br><br> </div>

<p><h4>Field operator</h4> <p>Under direct supervision, assigned daily work. May explain instructions and documentation to plan work activities. Helps coordinate movement of materials and equipment to work locations and sets up work site. Completes and reviews records, maintains tools and equipment, and performs various clean up activities. Job may require moderate to heavy lifting. Observes and follows all safety rules and procedures, including wearing required personal safety equipment. Requires a high school diploma or equivalent and 2 years of experience.</p></p><p></p>

<p><h4>Field operator</h4> <p>Under direct supervision, assigned daily work. May explain instructions and documentation to plan work activities. Helps coordinate movement of materials and equipment to work locations and sets up work site. Completes and reviews records, maintains tools and equipment, and performs various clean up activities. Job may require moderate to heavy lifting. Observes and follows all safety rules and procedures, including wearing required personal safety equipment. Requires a high school diploma or equivalent and 2 years of experience.</p></p><p></p>

<p>Install, maintain, troubleshoot, and repair heavy industrial electrical systems. Ensure safe and reliable operation of electrical equipment. Support preventive maintenance, breakdown maintenance, and commissioning activities.</p><p>Install, inspect, troubleshoot, and repair heavy electrical systems. Perform preventive and corrective maintenance of industrial equipment. Diagnose faults in motors, transformers, generators, MCCs, and switchgear. Carry out cable laying, termination, and panel wiring. Test electrical equipment using appropriate measuring instruments. Replace faulty electrical components and restore equipment operation. Support commissioning and startup activities. Maintain maintenance records and inspection reports. Ensure compliance with electrical safety standards and LOTO procedures. Coordinate with mechanical and production teams to minimize downtime. Maintain housekeeping and cleanliness of electrical panels and work areas. Report equipment abnormalities promptly.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 10th Pass with ITI/Diploma in Electrician, Electrical Maintenance, or Electrical Mechanic. 3 5 years of experience in heavy industrial electrical maintenance. Knowledge of AC/DC motors, transformers, generators, MCCs, switchgear, and control panels. Ability to read electrical drawings and schematics. Familiarity with multimeter, clamp meter, megger, and insulation tester. Understanding of preventive and breakdown maintenance. Basic PLC knowledge is an advantage. Knowledge of LOTO procedures and electrical safety standards.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Scaffolding Specialist<br><br><p><b>Company: KBR<br>Project: ROO Project, Iraq<br>Location: Basra, Iraq – On-site<br>Rotation: 28/28 days</b></p><br><br><p><b>About Company</b></p><br><br><p><i>"Belong, Connect, Grow, with KBR!</i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Job Purpose</b></p><br><br><p>The Scaffolding Specialist is responsible for the safe planning, erection, inspection, maintenance, and dismantling of scaffolding systems to support ROO Integrated Projects activities under EPCm Contract . This role ensures compliance with applicable with International and ROO standards, specifications, and safety regulations while optimizing scaffold efficiency and project schedules within an engineering, procurement, and construction framework.</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><ul><li><b>Plan and supervise scaffold activities</b>:&nbsp;Assess engineering drawings and method statements to determine scaffold type, layout, loads, and access requirements; develop task plans and risk assessments.</li><li><b>Erection &amp; dismantling</b>:&nbsp;Lead on-site erection, alteration, and dismantling of scaffolding structures in accordance with applicable standards and project procedures.</li><li><b>Inspection &amp; quality control</b>:&nbsp;Conduct routine inspections for stability, safety, and compliance; ensure tagging (e.g., safe/unsafe), maintenance, and corrective actions are documented.</li><li><b>Safety &amp; compliance</b>:&nbsp;Enforce site safety rules, use of PPE, and permit-to-work processes; coordinate with HSE for incident reporting and near-miss investigations.</li><li><b>Material management</b>:&nbsp;Manage scaffolding materials, accessories, and consumables; ensure traceability, storage, and return of equipment.</li><li><b>Coordination &amp; communication</b>:&nbsp;Liaise with construction supervisors, engineers, and subcontractors to align scaffold activities with project milestones and work plans within Brown Field Projects environment.</li><li><b>Problem solving</b>:&nbsp;Identify and resolve technical issues related to scaffold design, load limits, or access constraints; recommend temporary works when necessary.</li><li><b>Documentation</b>:&nbsp;Maintain accurate records including daily logs, inspection reports, load calculations, drawings (as-builts), and compliance certifications.</li><li><b>Training &amp; mentorship</b> Provide on-site coaching to scaffold teams, ensuring proper techniques and safety practices are understood and followed. Contribute to the development of local workforce capabilities by identifying training needs and delivering hands-on guidance. Support ROO’s long-term localization strategy by fostering knowledge transfer, promoting sustainable skill development, and preparing local personnel for future leadership roles within scaffolding operations..</li><li><b>Continuous improvement</b>:&nbsp;Propose and implement process improvements to enhance safety, efficiency, and cost-effectiveness.</li></ul><br><p><b>Technical Skills </b></p><br><br><ul><li><b>Scaffold Systems Knowledge</b>:&nbsp;Experience with common systems (e.g., tube-and-couple, cuplock, frame/scaffold boards) and associated components; ability to tailor solutions to Support ROO project requirements.</li><li><b>Engineering &amp; Load Calculations</b>:&nbsp;Interpret engineering drawings and perform basic structural load assessments and stability checks; competence in applying temporary works principles within ROO M&amp;E Projects framework.</li><li><b>Standards &amp; Codes</b>:&nbsp;Familiarity with international and regional scaffolding standards (e.g., OSHA/EN/ISO equivalents) and client-specific procedures; awareness of project-specific QA/QC requirements.</li><li><b>Inspection &amp; Testing</b>:&nbsp;Proficiency in scaffold inspections, tagging, acceptance criteria, and non-destructive testing basics as applicable to scaffolding of ROO M&amp;E Projects.</li><li><b>Tools &amp; Equipment</b>:&nbsp;Proficiency with rigging gear, restraint systems, access towers, and fall protection equipment; ability to select appropriate equipment for complex job sites.</li><li><b>Quality &amp; Documentation</b>:&nbsp;Strong documentation skills, including daily logs, checklists, load calculations, drawings (as-builts), and compliance certifications; use of document control practices.</li><li><b>Software (optional):</b>&nbsp;Basic proficiency in drawing review tools, BIM coordination concepts, or project management software as used on site.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li><b>Leadership &amp; Team Management</b>:&nbsp;Lead a diverse crew, delegate tasks, and maintain morale on demanding sites.</li><li><b>Communication</b>:&nbsp;Clear, concise communication with supervisors, engineers, and field personnel; effective reporting and escalation when needed.</li><li><b>Problem-Solving</b>:&nbsp;Proactive in identifying risks and proposing practical mitigations.</li><li><b>Safety-First Mindset</b>:&nbsp;Demonstrated commitment to safety culture and incident prevention.</li><li><b>Adaptability</b>:&nbsp;Flexibility to work in changing conditions, weather, and project needs.</li><li><b>Attention to Detail:</b>&nbsp;Meticulous in planning, inspections, and documentation.</li><li><b>Time Management</b>:&nbsp;Prioritization and organization to meet tight construction schedules.</li></ul><br><p><b>Experience &amp; Qualifications</b></p><br><br><ul><li><b>Experience</b>:&nbsp;Minimum of&nbsp;12 years&nbsp;of relevant experience in scaffolding on large oil &amp; gas, heavy industrial, or construction projects.</li><li><b>Education</b>:&nbsp;Bachelor’s Degree in Engineering&nbsp;or a related field.</li><li><b>Licenses/Certifications (preferred):</b></li></ul><ul><li>Scaffold Erection/Inspection Certification (onshore/offshore as applicable)</li><li>OSHA/NEBOSH/Corresponding Safety Certifications</li><li>Rigging/Signalperson certifications or equivalent</li></ul><br><p><b>Work Environment</b></p><br><br><ul><li><b>Site Location</b>:&nbsp;Basra, Iraq – Rumaila Field</li><li><b>Work Schedule</b>:&nbsp;Rotational schedule as dictated by project needs</li><li><b>Physical Demands</b>:&nbsp;On-site construction environment; standing, climbing, lifting, and exposure to outdoor conditions.</li><li><b>Safety &amp; Security</b>:&nbsp;Compliance with KBR’s safety programs, security protocols, and Iraq-specific regulations; adherence to emergency procedures.</li><li><b>Travel</b>:&nbsp;Occasional travel to other project sites or facilities as required.</li><li><b>Team Structure</b>:&nbsp;Reports to Construction/Scaffolding Superintendent or Site Engineering Lead; collaborates with construction crews, engineers, safety personnel, and subcontractors.</li></ul><br><p><b>Additional Information</b></p><br><br><ul><li>This role requires stringent adherence to safety standards and quality expectations due to the critical nature of on-site scaffolding in a high-hazard of Brown Field Projects environment.</li><li>The successful candidate will demonstrate a proven track record of delivering safe, compliant, and efficient scaffolding operations on complex projects.</li></ul><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Horizontal Foreman will be based at Baghdad Embassy Compound (BEC) Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for managing the daily work assignments of Material Handling and Heavy Equipment Operations and will report to the Operations and Maintenance Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Provide oversight of all material handling and heavy equipment support operations.</li><li>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</li><li>Schedule daily work assignments of personnel.</li><li>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</li><li>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</li><li>Provide reports and data - both required and ad hoc.</li><li>Ensure adequate supplies and materials are ordered for department.</li><li>Ensure personnel are properly trained in equipment operation.</li><li>Monitor and evaluate performance of personnel.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Acceptable Experience Level: Two (2) years experience with Horizontal Earthwork and Material Handling Equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</li><li>Knowledge, Skills, and Abilities:<ul><li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li><li>Knowledge of proper loading techniques and forklift weight capacities.</li><li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li><li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li><li>Prior experience in working with a multi-national workforce</li><li>Ability to extract information to produce reports.</li><li>Ability to communicate with a wide variety of colleagues and customers.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul></li><li>Education: A high school diploma or GED.</li><li>Passport, Licenses and Certifications: As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license from Home of Record.</li><li>Security Vetting: Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li><li>Relevant overseas contract experience.</li><li>Previous work experience in harsh environmental conditions are a plus.</li><li>Experience working with Amentum.</li></ul><p></p></section>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>

<p><h4>KBR Sustainable Technology Solutions (STS)</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Responsibilities:</h4> <ul> <li>Day to day delivery of mechanical engineering support for site operations.</li> <li>Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.</li> <li>Collaborates with central engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.</li> <li>Promotes a culture of open safety reporting and continuous improvement.</li> <li>Provides immediate front line support for operations and maintenance teams to resolve minor issues and escalate more significant issues to the central engineering team.</li> <li>Ensures asset mechanical engineering risks (both static and rotating) are understood, controlled, managed and reduced.</li> <li>Participates in a variety of asset and project risk assessments.</li> <li>Input into anomaly assessment and resolution plans.</li> <li>Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all safe operating limit excursions.</li> <li>Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.</li> <li>Provides mechanical support to technical management of change (MoCs) and engineering queries.</li> <li>Acts as technical interface with projects and modifications organisation, including development of statement of requirements (SOR), project initiation requests (PIRs), and decision support packages (DSP).</li> <li>Supports delivery of production efficiency improvement and defect elimination processes (including simple investigations for deferrals and vulnerabilities).</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity (IPC).</li> <li>Performs follow-up actions and observations from self-verification checks that are related to mechanical engineering.</li> <li>Participates in start up readiness and assurance reviews.</li> <li>Provides coaching to junior engineers.</li> </ul> <h4>Experience, Qualifications & Key Skills</h4> <ul> <li>Above 10 years experience in oil and gas industry (preferably with international oil companies direct or contract).</li> <li>Professional (chartered) engineer preferred.</li> <li>Technical degree in mechanical engineering or allied engineering subject.</li> <li>Experience in previous asset engineering or operations support engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – office suite, document management, applications for computerized maintenance management systems (CMMS) and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behavior change management.</li> </ul> <h4>Preferred Qualifications:</h4> <p>Certified professional engineer.</p> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Balad, Iraq*** Under the supervision of the Firefighter Crew Chiefs, the Firefighter responds to multiple-types of emergencies operating as a firefighter. Maintains vehicles, equipment, tools, and protective clothing in a serviceable condition. Extinguish fires and takes precautions to prevent fire rekindling. Operates pumps, foam generators, turrets, nozzles, and other firefighting tools and equipment. Exercises caution to avoid personal injury and property damage and comply with strict health and safety standards. At the site of a fire protects and preserves evidence indicating the cause of the fire. Properly wears personal protective clothing. Conducts and take part in frequent reoccurring proficiency training, OJT and maintains required certifications. Performs other duties as assigned. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Participates as a positive team member and understands and conforms to the LOGCAP V contract Performance Work Statement. + Actively participates and maintains a safe workplace, ensuring safety is the highest priority. + Complies with all Environmental, Health, and Safety (EHS) and Quality Assurance (QA) requirements and goals. + Maintains documentation as necessary to meet these requirements. + Ensures emergency equipment is operational and in a state of readiness as required by NFPA or other industry standards. + Maintains and clean personal protective equipment and works as an effective team member in cleaning equipment and facilities. + As part of a team conducts fire inspections, pre-incident planning and ensures that facilities are safe and documentation is recorded and tracked. + Operates computerized digital fire alarm receiving equipment including two-way radio communications equipment. + Performs additional property control and logistical duties in support of fire department operations to include, maintaining accountability of equipment, scheduling maintenance of equipment, coordinating appointments of subordinates, and other administrative duties as needed. + Serves as a team member on a rescue unit, ladder truck, engine company, water tender, or airport ARFF apparatus. + Enters burning or contaminated structures, vehicles, and other immediately dangerous to life and health areas to fight fires and/or perform rescues while wearing required personal protective equipment. + Acts as a crew member for structural fires, aircraft fires, rescue operations, medical emergencies, hazardous materials responses and other emergency events as directed in accordance with process and procedures identified in the department, standard operating procedures. + Performs duties in support of organizational metrics. + Adequately and honestly tracks all data related to metrics. + Provides direct support to the achievement of all metrics related to the LOGCAP V. + Attends meeting in the absence of the supervisor or as needed. + Communicates professionally both orally and in writing with team members and others, as needed, to relay information necessary for job success. + This includes, but is not limited to, performance appraisals, job requirements, division metrics, projects, quality standard procedures, and safety practices. + Performs other duties as required. + This position description is subject to change at any time as needed to meet the requirements of the program or company. Qualifications + Minimum Qualifications: + Education/Certifications: + One-year related experience may be substituted for one year of education, if degree is required. + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be able to pass annual firefighter Occupations Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583 + Must be available for recall. + Required to have IFSAC or Pro-Board Certification to these levels: Hazardous Materials Awareness and Operations, Fire Fighter II, Airport Firefighter (ARFF), Driver Operator Pumper and Driver Operator ARFF, Mobile Water Supply, CPR &amp; First Aid Responder and Telecommunicator II. + Experience: + Minimum Five (5) years experience as a Fire Fighter working on a DOD Installation. + OCN Qualifications/Experience Requirements: + Minimum five (5) Years of Fire Fighter Experience working on a DOD installation. + Required to have IFSAC or Pro-Board Certification to these levels: Hazardous Materials Awareness and Operations, Fire Fighter II, Driver Operator Pumper, + Required to have Hazmat Technician Certification + Airport Firefighter certification received with in six months of hire date preferred + Airport Firefighter and ARFF Driver Operator certification required + Must be able to read/write and speak English. + Skills: + Possess the ability to demonstrate firefighter knowledge and skills in a professional manner. + Ability to work effectively with fellow employees and management personnel at all levels to include multinational staff, and military officials. + Strong ability to exercise professional discretion and good judgment and to understand the effect of decisions made. + Exhibit strong interpersonal skills and ability to communicate in English both verbally and writing and must have good computer skills in MS-Word, MS-Excel, and MS- Outlook. + Working Conditions: + Duties will involve the conduct of work in the outdoors with a potential exposure to extreme climatic conditions including frequent dust storms and high temperatures up to 130 degrees in the summer months. + Potential exposure to chemical or biological agents could exist. + Employee use of personal protective equipment (PPE) in certain areas is required. + Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire Department, company, and Army safety policies. + Must be able to respond and work in all types of weather and in less than ideal conditions and may have to enter hazardous environments. + Must be able climb ladders to gain access to upper levels of buildings or to rescue individuals from burning structures or when trapped. + Physical Requirements: + Must meet or exceed physical requirements contained in the current edition NFPA 1582, including but not limited to the physical strength and ability to perform heavy and strenuous tasks for extended periods of time under dangerous and uncomfortable conditions, often while wearing bulky protective gear, including self-contained breathing apparatus. + Must be available for recall and manage personnel issues off duty. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Field Service Engineer - Centrifugal Compressor</b><br>&nbsp;</p><br><p><b>Are you a Mechanical Field Service Engineer looking for an interesting and inspiring opportunity?</b><br>&nbsp;</p><br><p><b>Would you like to be part of our Turbomachinery Process Solutions Product Line?</b><br>&nbsp;</p><br><p><b>Join our Industrial and Energy Technology</b> <b>Team!</b></p><br><p>Our Industrial and Energy Technology (IET) operates across 120 countries and serves the entire energy value chain and industrial sector. We hold an extensive portfolio of rotating equipment, process flow, transmission technology and lifecycle services. Our Engineering Transformation teamwork to improve the quality of our Engineering processes.</p><br><p><b>Partner with the best</b><br>&nbsp;</p><br><p>As a Field Service Engineer - Centrifugal Compressors, you will be coordinating and overseeing work at the field site, providing quality service to the customer. In addition, your Job role may include providing the planning necessary for the job including instructions to the crew and equipment.<br>&nbsp;</p><br><p>As a Field Service Engineer - Centrifugal Compressor, you will be responsible for</p><br><ul><li><p>Providing technical advice and support to clients and craft labour in the installation, commissioning and maintenance of Baker Hughes-supplied Centrifugal Compressors.</p><br></li><li><p>Unloading and Inspection of the Centrifugal Compressor &amp; its major auxiliaries at the installation site and their placement on the foundation.</p><br></li><li><p>Improving Geometric dimensional check of foundation, equipment and auxiliary skids positioning, levelling, and alignment</p><br></li><li><p>Performing Installation, commissioning, maintenance and Startup of various types of Centrifugal Compressors MCL, BCL, PCL, and SRL supplied by Baker Hughes at customer sites.</p><br></li><li><p>Performing minor &amp; major inspections of Centrifugal Compressors. Involving assembly, disassembly, checking and adjusting clearances evaluating wear and damage state of Couplings, lubricated-tooth, and dry-elastic types, thrust bearings and journal bearings of various kinds, gas seals, labyrinth and honeycomb types, Oil seals, gauged floating rings types, Dry gas seals or oil mechanical seals, Labyrinth or honeycomb inner seals, Diaphragms or diaphragms bundle and volutes.</p><br></li></ul><p><br><b>Fuel your passion</b><br>&nbsp;</p><br><p>To be successful in this role you will:<br>&nbsp;</p><br><ul><li><p>Have a bachelor’s in engineering with 8+ years of relevant industry experience.</p><br></li><li><p>Have working experience in Rotating equipment in the Field at Customer Sites.</p><br></li><li><p>Have excellent Functional/Technical, Customer Focus, Communication, Interpersonal, and Team working skills.</p><br></li><li><p>Have prior experience in Installation and/or Maintenance activities of Centrifugal Compressors in the Field at Customer Sites</p><br></li></ul><p><br><b>Work in a way that works for you</b><br>&nbsp;</p><br><p>We recognize that everyone is different and that the way in which people want to work and deliver at their best is different for everyone too. In this role, we can offer the following flexible working patterns:<br>&nbsp;</p><br><ul><li><p>When assignments are complete, in general, you won't be required to visit the office, however, you can operate from Home and perform basic tasks like completing previous assignment reports, mobilization-related aspects, etc before you take on your next projects. The company shall ensure a work-life balance for the individual.</p><br></li></ul><p><br><b>Working with us</b><br>&nbsp;</p><br><p>Our people are at the heart of what we do at Baker Hughes. We know we are better when all of our people are developed, engaged and able to bring their whole authentic selves to work. We invest in the health and well-being of our workforce, train and reward talent and develop leaders at all levels to bring out the best in each other.<br>&nbsp;</p><br><p><b>Working for you</b><br>&nbsp;</p><br><p>Our inventions have revolutionized energy for over a century. But to keep going forward tomorrow, we know we have to push the boundaries today. We prioritize rewarding those who embrace change with a package that reflects how much we value their input. Join us, and you can expect:<br>&nbsp;</p><br><ul><li><p>Contemporary work-life balance policies and well-being activities</p><br></li><li><p>Comprehensive private medical care options</p><br></li><li><p>The safety net of life insurance and disability programs</p><br></li><li><p>Tailored financial programs</p><br></li><li><p>Additional elected or voluntary benefits</p><br></li></ul>The Baker Hughes internal title for this role is: Field Specialist III - SVS - CC </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <b>Experience:</b> <br> <br> • 10+ years of related multinational experience as an HVAC/R Maintenance Engineer in oil &amp; gas plants (refineries, LNG, or petrochemical) or as a field engineer during plant erection and commissioning <br> <br> <b>Skills &amp; Requirements:</b> <br> <br> • Good communication skills with ability to interact at all levels <br> <br> • Strong critical thinking and problem-solving skills <br> <br> • Ability to prioritize and manage multiple tasks <br> <br> • Capable of working independently with minimal supervision in upstream oil &amp; gas operations <br> <br> • Strong knowledge of HVAC equipment and control systems <br> <br> • Good analytical, coordination, cooperation, and planning skills <br> <br> • Result-driven mindset <br> <br> • Strong focus on operational safety <br> <br> • Ability to evaluate technical, economic, environmental, and safety aspects before decisions <br> <br> • Familiar with Process Safety Pillars and relevant elements <br> <br> </span> <br> <span> Requirements </span><ul> <li><span>Bachelor’s degree in HVAC or similar (Electrical or Mechanical Engineering)</span> <br></li> <li><span>10+ Years work experience in mandatory, prefer with GCC and/or oil refinery exposure</span> <br></li> </ul> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision from the Production Manager,</p><br> <ul> <li>The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields.</li> <li>Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies.</li> <li>Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team.</li> <li>Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment.</li> <li>Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques.</li> <li>Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment.</li> <li>Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs.</li> <li>Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems.</li> <li>Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards.</li> <li>Develops and maintains good working relationships with Production Team through effective communication and teamwork.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply.</li> <li>Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</li> </ul><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210433&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p>The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects</li><li>Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of one (1) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines</li><li>Valid Driver s License</li></ul><p>Preferred:</p><ul><li>Degree/Associate Degree in Technical Field or Gas Turbine Systems</li></ul><p>Desired Characteristics:</p><ul><li>Ability to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking</li><li>Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Technician (Instrument) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be Responsible for <strong>instrument pre-commissioning, commissioning, calibration, loop checking, functional testing, and punch-list rectification</strong> in accordance with approved procedures. Ensure accurate test results, proper defect reporting, and safe system readiness for handover.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform <strong>instrument pre-commissioning and commissioning</strong> activities in accordance with approved procedures.</li><li>Conduct <strong>calibration, continuity checks, loop checks, and signal verification</strong>.</li><li>Configure and test <strong>field instruments, smart devices, and instrument interfaces</strong>.</li><li>Perform <strong>functional, Cause &amp; Effect, alarm, interlock, and shutdown tests</strong> under Engineer supervision.</li><li>Verify instrument signals and functionality through <strong>DCS, SIS/ESD, F&amp;G, PLC, and ICSS interfaces</strong>.</li><li>Identify, troubleshoot, and rectify <strong>commissioning defects and punch-list items</strong>.</li><li>Support <strong>energization, isolation, reinstatement, startup, and controlled return to service</strong>.</li><li>Maintain and verify <strong>test equipment, calibration standards, tools, and commissioning consumables</strong>.</li><li>Complete <strong>test sheets, calibration records, checklists, punch lists, and commissioning documentation</strong>.</li><li>Report abnormal conditions, failed tests, defects, and unresolved issues to the <strong>Commissioning Engineer</strong>.</li><li>Coordinate with <strong>Operations, Instrumentation, ICSS, Electrical, Mechanical, Construction, HSE, and vendors</strong>.</li><li>Comply with <strong>PTW, LOTO, HSE, process safety, quality, and commissioning requirements</strong>.</li></ul> </div>