وظائف أمن صناعى - بغداد العراق

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance or the ability to obtain a secret clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <p>Successfully complete and pass the medical and dental examinations as required by the employer and customer for deployment to Iraq.</p> <p>Must maintain physical and dental requirements for the duration of the deployment.</p> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Duties:</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Serve as a structural and airport firefighter, first responder, and HAZMAT responder on a scheduled rotation.</p> <p>Participate in fire and emergency services activities including: fire suppression, EMS, rescue, public assistance, fire investigation, fire prevention, pre-fire planning, fire company training, public education, clinical training, and routine maintenance of apparatus, equipment, and facilities.</p> <p>Support emergency management functions as needed.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Other Duties:</h4> <p>This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job.</p> <p>Duties, responsibilities, and activities</p><p></p>

<p>Amentum is seeking a Welder to support maintenance and repair of various naval vessels such as 60-meter Offshore Support Vessels (OSV), 35-meter Patrol Boats (PB), 26-foot Defender Class, and Rigid Hull Inflatable Boats (RHIB). This position supports the Iraq Vessel Maintenance and Repair (VMR) program. This position is for a full-time, in-country position. The work location will be at the Iraqi Naval Base in the port of Umm Qasr, Iraq. Essential responsibilities and daily duties will include:</p><p>Perform various welding and structural repair tasks, including modifications, and fabrications to ensure the structural integrity of the naval vessels. Collaborate and coordinate with key members of the VMR support team to effectively plan, execute, and report tasking associated with OSV, PB and Defender class, and RHIB vessels to include the industrial manager, site manager, project manager, and other technical support personnel. Provide technical expertise to ensure the successful completion of all welding performed onboard OSV, PB and Defender class, and RHIB vessels. Identify all issues that impact safety, quality, or task schedules and notify the Industrial Manager, site manager, and project manager. Provide recommendations to the Industrial Manager, site manager, and project manager to mitigate identified issues. Develop solutions or recommendations to minimize system/equipment downtime and collaborate with both the customer and internal teams to ensure customer satisfaction. Assess work requirements to identify the parts and materials needed. Perform installation and configuration of equipment as required. Ensure that the equipment is properly installed, configured to perform optimally, and inspected for any defects. Participate in required meetings including weekly teleconferences and Work Definition Conferences with program stakeholders. Comply with all Contract Deliverable Requirement List (CRDL) requirements.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma or GED equivalent.</li><li>Six (6) years of progressive experience is required in servicing ship or submarine systems, including the planning of field services.</li><li>Four (4) years of that experience is required to have been obtained in welding aboard ships or similar materials (aluminum and steel).</li><li>Must have specialized training in welding and understand implementation of various types of Non-Destructive Testing (NDT) and Objective Quality Evidence (OQE) in use for welding applications.</li><li>Ability to work independently and in a team environment.</li><li>Ability to communicate verbally and in writing.</li><li>Must be proficient in English.</li><li>Ability to travel CONUS and OCONUS.</li><li>Ability to obtain a country clearance and base pass authorization.</li><li>Note: US citizenship is required.</li><li>Ability to possess an active passport at least two years after arrival in Iraq.</li></ul><p>Preferred Qualifications : Foreign Military Sales experience.</p>

<p>Amentum is seeking a Welder to support maintenance and repair of various naval vessels such as 60-meter Offshore Support Vessels (OSV), 35-meter Patrol Boats (PB), 26-foot Defender Class, and Rigid Hull Inflatable Boats (RHIB). This position supports the Iraq Vessel Maintenance and Repair (VMR) program. This position is for a full-time, in-country position. The work location will be at the Iraqi Naval Base in the port of Umm Qasr, Iraq. Essential responsibilities and daily duties will include:</p><ul><li>Perform various welding and structural repair tasks, including modifications, and fabrications to ensure the structural integrity of the naval vessels.</li><li>Collaborate and coordinate with key members of the VMR support team to effectively plan, execute, and report tasking associated with OSV, PB and Defender class, and RHIB vessels to include the industrial manager, site manager, project manager, and other technical support personnel.</li><li>Provide technical expertise to ensure the successful completion of all welding performed onboard OSV, PB and Defender class, and RHIB vessels.</li><li>Identify all issues that impact safety, quality, or task schedules and notify the Industrial Manager, site manager, and project manager.</li><li>Provide recommendations to the Industrial Manager, site manager, and project manager to mitigate identified issues.</li><li>Develop solutions or recommendations to minimize system/equipment downtime and collaborate with both the customer and internal teams to ensure customer satisfaction.</li><li>Assess work requirements to identify the parts and materials needed.</li><li>Perform installation and configuration of equipment as required. Ensure that the equipment is properly installed, configured to perform optimally, and inspected for any defects.</li><li>Participate in required meetings including weekly teleconferences and Work Definition Conferences with program stakeholders.</li><li>Comply with all Contract Deliverable Requirement List (CRDL) requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements:</p><ul><li>High School Diploma or GED equivalent.</li><li>Six (6) years of progressive experience is required in servicing ship or submarine systems, including the planning of field services.</li><li>Four (4) years of that experience is required to have been obtained in welding aboard ships or similar materials (aluminum and steel).</li><li>Must have specialized training in welding and understand implementation of various types of Non-Destructive Testing (NDT) and Objective Quality Evidence (OQE) in use for welding applications.</li><li>Ability to work independently and in a team environment.</li><li>Ability to communicate verbally and in writing. Must be proficient in English.</li><li>Ability to travel CONUS and OCONUS.</li><li>Ability to obtain a country clearance and base pass authorization. Note: US citizenship is required.</li><li>Ability to possess an active passport at least two years after arrival in Iraq.</li></ul><p>Preferred Qualifications:</p><ul><li>Foreign Military Sales experience.</li></ul>

<p><h4>Job Description</h4> <p>Amentum is seeking a welder to support maintenance and repair of various naval vessels such as 60-meter offshore support vessels (OSV), 35-meter patrol boats (PB), 26-foot defender class, and rigid hull inflatable boats (RHIB). This position supports the Iraq Vessel Maintenance and Repair (VMR) program. This position is for a full-time, in-country position. The work location will be at the Iraqi Naval Base in the port of Umm Qasr, Iraq.</p> <h4>Essential responsibilities and daily duties will include:</h4> <ul> <li>Perform various welding and structural repair tasks, including modifications and fabrications to ensure the structural integrity of the naval vessels.</li> <li>Collaborate and coordinate with key members of the VMR support team to effectively plan, execute, and report tasking associated with OSV, PB and defender class, and RHIB vessels to include the industrial manager, site manager, project manager, and other technical support personnel.</li> <li>Provide technical expertise to ensure the successful completion of all welding performed onboard OSV, PB and defender class, and RHIB vessels.</li> <li>Identify all issues that impact safety, quality, or task schedules and notify the industrial manager, site manager, and project manager.</li> <li>Provide recommendations to the industrial manager, site manager, and project manager to mitigate identified issues.</li> <li>Develop solutions or recommendations to minimize system/equipment downtime and collaborate with both the customer and internal teams to ensure customer satisfaction.</li> <li>Assess work requirements to identify the parts and materials needed.</li> <li>Perform installation and configuration of equipment as required. Ensure that the equipment is properly installed, configured to perform optimally, and inspected for any defects.</li> <li>Participate in required meetings including weekly teleconferences and work definition conferences with program stakeholders.</li> <li>Comply with all contract deliverable requirement list (CRDL) requirements.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or GED equivalent.</li> <li>Six (6) years of progressive experience is required in servicing ship or submarine systems, including the planning of field services.</li> <li>Four (4) years of that experience is required to have been obtained in welding aboard ships or similar materials (aluminum and steel).</li> <li>Must have specialized training in welding and understand implementation of various types of non-destructive testing (NDT) and objective quality evidence (OQE) in use for welding applications.</li> <li>Ability to work independently and in a team environment.</li> <li>Ability to communicate verbally and in writing. Must be proficient in English.</li> <li>Ability to travel CONUS and OCONUS.</li> <li>Ability to obtain a country clearance and base pass authorization. Note: US citizenship is required.</li> <li>Ability to possess an active passport at least two years after arrival in Iraq.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Foreign military sales experience.</li> </ul></p><p></p>

<h3>Position Title</h3><p>Production Manager</p><h3>Department</h3><p>Production</p><h3>Reports To</h3><p>Plant Manager / General Manager</p><h3>Position Summary</h3><p>The Production Manager is responsible for planning, organizing, directing, and controlling all manufacturing operations to ensure production targets are achieved safely, efficiently, and in compliance with the company's quality, food safety, and operational standards. The role focuses on maximizing productivity, minimizing downtime and waste, optimizing resource utilization, and driving continuous improvement across all production activities.</p><h3>Key Responsibilities</h3><ul><li><p>Plan, organize, and manage all daily production operations to ensure the achievement of production targets.</p></li><li><p>Develop and implement daily, weekly, and monthly production plans in coordination with Sales, Supply Chain, Warehouse, Maintenance, and Quality departments.</p></li><li><p>Ensure production schedules are executed on time while meeting quality, safety, and cost objectives.</p></li><li><p>Supervise all manufacturing and packaging operations across production lines.</p></li><li><p>Monitor production performance, analyze operational data, and implement corrective actions to improve efficiency.</p></li><li><p>Maximize Overall Equipment Effectiveness (OEE) through continuous monitoring and performance improvement initiatives.</p></li><li><p>Identify production bottlenecks and implement solutions to minimize downtime and increase productivity.</p></li><li><p>Coordinate closely with the Maintenance Department to ensure equipment reliability and preventive maintenance execution.</p></li><li><p>Ensure the availability of raw materials and packaging materials to support uninterrupted production.</p></li><li><p>Optimize labor utilization and production resources to maximize operational efficiency.</p></li><li><p>Monitor production costs and implement initiatives to reduce waste and improve cost efficiency.</p></li><li><p>Ensure compliance with Good Manufacturing Practices (GMP), HACCP, ISO 22000, and all food safety and quality standards.</p></li><li><p>Develop, review, and enforce Standard Operating Procedures (SOPs) and work instructions.</p></li><li><p>Lead continuous improvement initiatives using Lean Manufacturing and best manufacturing practices.</p></li><li><p>Analyze production issues using Root Cause Analysis (RCA) and implement Corrective and Preventive Actions (CAPA).</p></li><li><p>Prepare and present daily, weekly, and monthly production performance reports to senior management.</p></li><li><p>Manage production budgets and support cost-saving initiatives.</p></li><li><p>Lead the recruitment, training, coaching, and performance evaluation of production supervisors and operators.</p></li><li><p>Foster a culture of teamwork, accountability, operational excellence, and continuous improvement.</p></li><li><p>Ensure full compliance with Occupational Health &amp; Safety regulations and company policies.</p></li><li><p>Conduct regular production meetings to review performance, address operational challenges, and align production priorities.</p></li><li><p>Participate in the planning, installation, commissioning, and startup of new production lines and manufacturing equipment.</p></li><li><p>Support new product development, process validation, and production trials.</p></li><li><p>Collaborate effectively with cross-functional departments to ensure smooth plant operations.</p></li><li><p>Perform any additional duties assigned by senior management that are related to the role.</p></li></ul><p></p><p><strong>Requirements</strong></p><h1>Job Requirements</h1><h3>Education</h3><ul><li><p>Bachelor's degree in Mechanical Engineering, Industrial Engineering, Production Engineering, Food Engineering, Chemical Engineering, or a related field.</p></li><li><p>A Master's degree in Industrial Management, Operations Management, Business Administration (MBA), or a related discipline is an advantage.</p></li></ul><h3>Experience</h3><ul><li><p>Minimum of <strong>10 years</strong> of experience in a food and beverage manufacturing environment.</p></li><li><p>At least <strong>5 years</strong> of experience in a Production Manager or equivalent leadership role.</p></li><li><p>Proven experience in managing high-speed production and packaging lines.</p></li><li><p>Experience in the production of bottled water, carbonated soft drinks, juices, energy drinks, or dairy beverages is highly preferred.</p></li><li><p>Experience in leading large production teams and managing multi-shift operations.</p></li></ul><h3>Technical Skills</h3><ul><li><p>Strong knowledge of Production Planning and Scheduling.</p></li><li><p>Experience with Lean Manufacturing, Continuous Improvement, and Waste Reduction initiatives.</p></li><li><p>Knowledge of Overall Equipment Effectiveness (OEE) and production performance analysis.</p></li><li><p>Experience in Root Cause Analysis (RCA) and Corrective &amp; Preventive Actions (CAPA).</p></li><li><p>Familiarity with Total Productive Maintenance (TPM) principles.</p></li><li><p>Strong understanding of Good Manufacturing Practices (GMP).</p></li><li><p>Knowledge of HACCP and ISO 22000 Food Safety Management Systems.</p></li><li><p>Experience in production cost control and productivity improvement.</p></li><li><p>Ability to develop and implement Standard Operating Procedures (SOPs).</p></li><li><p>Proficiency in ERP systems (Odoo, SAP, Oracle, Microsoft Dynamics, or similar).</p></li><li><p>Advanced proficiency in Microsoft Office, particularly Microsoft Excel.</p></li></ul><h3>Leadership &amp; Management Skills</h3><ul><li><p>Strong leadership and team management capabilities.</p></li><li><p>Excellent planning, organizing, and decision-making skills.</p></li><li><p>Ability to manage multiple priorities in a fast-paced manufacturing environment.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Excellent communication and interpersonal skills.</p></li><li><p>Ability to motivate, coach, and develop production teams.</p></li><li><p>Strong conflict resolution and performance management skills.</p></li><li><p>Results-oriented with a continuous improvement mindset.</p></li></ul><h3>Language Requirements</h3><ul><li><p>Fluent in Arabic.</p></li><li><p>Good command of English (spoken and written).</p></li></ul><h3>Computer Skills</h3><ul><li><p>Microsoft Office Suite (Advanced), especially Excel.</p></li><li><p>ERP Systems.</p></li><li><p>Power BI or other data visualization tools is an advantage.</p></li></ul><h3>Personal Attributes</h3><ul><li><p>High level of integrity and professionalism.</p></li><li><p>Strong sense of responsibility and accountability.</p></li><li><p>Ability to work under pressure and meet tight deadlines.</p></li><li><p>Excellent organizational and time management skills.</p></li><li><p>Adaptability and flexibility in a dynamic manufacturing environment.</p></li><li><p>Commitment to workplace safety, quality, and operational excellence.</p></li></ul><p></p>

<p><h4>Duties</h4> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure Property Department compliance with Property Management and Control Procedures.<br> Conduct random compliance audits on all sites and departments in Iraq.<br> Develop and execute corrective action plans for audit deficiencies and inventory accountable property.<br> Mentor lower-level Property Staff and custodians in proper process and procedures as they relate to Government Property.<br> Identify problem areas and recommend viable solutions.<br> Perform physical inventories of Government Furnished Property (GFP) and Contractor Acquired Property (CAP), as directed by the Property Management and Control Procedures and/or the Logistics and Property Manager.<br> Ensure Government Property Identification numbers (GP) are properly assigned, prepare required schedule, and assist with identifying lost, damaged, and destroyed property as well as excessive consumption.<br> Work closely with Property Custodians to ensure overall accountability of assets.<br> Track and record movement of all types of Government property. This includes movement from one point to another within a contractor’s facility, movement between facilities for any purpose, and protection during movement.<br> Conduct country-wide Property Training on a yearly basis as well as establish training plans for new hire employees and refresher training.<br> Ensure compliance with Federal Acquisition Regulation (FAR), Statement of Work (SOW), and Standard Operating Procedures (SOP).<br> Develop processes and desktop procedures to maintain continuity of job performance.<br> Audit logs and status records to ensure completion of lost, damaged, or destroyed items.<br> Check LTDD packages for accuracy and completion.<br> Perform additional duties and projects as qualified to perform as assigned.<br> Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Five years’ experience with overseas Government contracts. Department of State contracts strongly preferred.</p> <p><strong>Knowledge, skills, and abilities:</strong><br> Knowledge of FAR and industry leading practices regarding government property.<br> Ability to clearly and concisely articulate services and requirements in writing.<br> Ability to articulate in a clear and concise manner with Management and Trades Departments daily.<br> Ability to demonstrate analytical and researching skills.<br> Ability to perform the technical requirements efficiently and effectively.<br> Ability to define problems, collect data, and propose solutions.<br> Ability to read, interpret, and follow all Logistic Management procedures, policies, and guidelines.<br> Ability to effectively present information and respond to questions.<br> Excellent organizational and time management skills, with ability to prioritize effectively and work with a sense of urgency.<br> Ability to lift materials and equipment weighing up to 50 lbs.<br> Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.<br> Understanding how inventory affects compensation.<br> Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.<br> Cross-cultural sensitivity with an international perspective.<br> Computer skills, specifically in Microsoft Word and Excel.<br> Ability to become an active and functioning member of a team.<br> Ability to be innovative and be an agent for change.<br> Expert communication skills to facilitate and disseminate information.</p> <p><strong>Education:</strong><br> An undergraduate degree is preferred but can be replaced with additional years of Government Property Administration experience.</p> <p><strong>Licenses and certifications:</strong><br> Valid driver’s license from home of record.<br> NPMA Certification or ability to obtain within one year.</p> <p><strong>Security vetting:</strong><br> Possessing a Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification prior to being hired is required.</p> <p><strong>Language skills:</strong><br> Sufficient English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong><br> Successfully complete and pass the medical and dental examinations as required for deployment. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with the company.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety:</strong> Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid and buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams as appropriate.</p> <p><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</p> <h4>Working and living conditions</h4> <p>This position may be in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120 to 130 degrees Fahrenheit (50 to 55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck and cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Job description</h4> <p>The operations manager will be based at one of the three Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for taking ownership of all site operational responsibilities to include directing the daily performance of the organization, planning, scheduling and training processes to meet the requirements of the contract. This position will report to the OMSS program manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p> <h4>Duties:</h4> <ul> <li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li> <li>Comply with all environmental health & safety and quality assurance requirements and goals.</li> <li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li> <li>Act as the program manager’s principal operations representative.</li> <li>Responsible for the management of all O&M functions, including ensuring there are qualified personnel to meet staffing requirements, and the central planning, coordination, control, and actual performance of these functions.</li> <li>Manage the O&M and other assigned functions on site to ensure overall contract performance, which requires getting information to and from critical operating/supporting elements and directing/coordinating actions to ensure resources are fully utilized to properly perform the mission.</li> <li>Monitor system readiness, identify problem areas, and respond to mission requirements to perform contract requirements.</li> <li>Direct and monitor the preventive maintenance program; accept, process, coordinate, and assign work orders, projects, and large task assignments.</li> <li>Control resources; monitor staff proficiency and qualifications; monitor staff endurance; monitor the locations and activities of assets; and coordinate the flow of information to and from O&M staff.</li> <li>Perform additional duties and projects as assigned.</li> </ul> <h4>Required:</h4> <p><strong>Minimum acceptable experience level:</strong><br> Ten (10) years’ O&M experience compatible with program requirements.</p> <p><strong>Knowledge, skills and abilities:</strong></p> <ul> <li>Demonstrated working knowledge of operations and maintenance activities for a small plant, overseas, or military facility.</li> <li>Demonstrated ability to manage required staff.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED. A bachelor’s degree in business management, political science, organizational effectiveness or similar discipline leading to a broad management background is preferred.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license.</p> <p><strong>Security vetting:</strong> Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Other responsibilities</h4> <ul> <li><strong>Safety:</strong> Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li> </ul> <h4>Desired:</h4> <ul> <li>Relevant overseas operations management experience.</li> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The operations manager will be based at one of the three Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for taking ownership of all site operational responsibilities to include directing the daily performance of the organization, planning, scheduling and training processes to meet the requirements of the contract. This position will report to the OMSS program manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p> <h4>Duties:</h4> <ul> <li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li> <li>Comply with all environmental health & safety and quality assurance requirements and goals.</li> <li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li> <li>Act as the program manager’s principal operations representative.</li> <li>Responsible for the management of all O&M functions, including ensuring there are qualified personnel to meet staffing requirements, and the central planning, coordination, control, and actual performance of these functions.</li> <li>Manage the O&M and other assigned functions on site to ensure overall contract performance, which requires getting information to and from critical operating/supporting elements and directing/coordinating actions to ensure resources are fully utilized to properly perform the mission.</li> <li>Monitor system readiness, identify problem areas, and respond to mission requirements to perform contract requirements.</li> <li>Direct and monitor the preventive maintenance program; accept, process, coordinate, and assign work orders, projects, and large task assignments.</li> <li>Control resources; monitor staff proficiency and qualifications; monitor staff endurance; monitor the locations and activities of assets; and coordinate the flow of information to and from O&M staff.</li> <li>Perform additional duties and projects as assigned.</li> </ul> <h4>Required:</h4> <p><strong>Minimum acceptable experience level:</strong><br> Ten (10) years’ O&M experience compatible with program requirements.</p> <p><strong>Knowledge, skills and abilities:</strong></p> <ul> <li>Demonstrated working knowledge of operations and maintenance activities for a small plant, overseas, or military facility.</li> <li>Demonstrated ability to manage required staff.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED. A bachelor’s degree in business management, political science, organizational effectiveness or similar discipline leading to a broad management background is preferred.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license.</p> <p><strong>Security vetting:</strong> Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Other responsibilities</h4> <ul> <li><strong>Safety:</strong> Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li> </ul> <h4>Desired:</h4> <ul> <li>Relevant overseas operations management experience.</li> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate Equipment Transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma), bachelor’s degree in related field or fifteen (15) years of related experience.</p> <h4>Passport, licenses and certifications</h4> <p>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</p> <p>Valid drivers’ license.</p> <h4>Security vetting</h4> <p>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language skills</h4> <p>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with Amentum-PAE.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate Equipment Transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma), bachelor’s degree in related field or fifteen (15) years of related experience.</p> <h4>Passport, licenses and certifications</h4> <p>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</p> <p>Valid drivers’ license.</p> <h4>Security vetting</h4> <p>Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language skills</h4> <p>Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with Amentum-PAE.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Horizontal Foreman will be based at Baghdad Embassy Compound (BEC) Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for managing the daily work assignments of Material Handling and Heavy Equipment Operations and will report to the Operations and Maintenance Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive. DUTIES: Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace. Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation. Provide oversight of all material handling and heavy equipment support operations. Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed. Schedule daily work assignments of personnel. Review work orders and support requests to determine safety requirements, permitting, and equipment needs. Manage all work order activity to ensure that all work is properly documented and submitted for recording. Provide reports and data - both required and ad hoc. Ensure adequate supplies and materials are ordered for department. Ensure personnel are properly trained in equipment operation. Monitor and evaluate performance of personnel. Perform additional duties and projects as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>REQUIRED: Minimum Acceptable Experience Level: Two (2) years experience with Horizontal Earthwork and Material Handling Equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks. Knowledge, Skills, and Abilities: Good time management skills and able to multi-task using various types of cranes and rigging gear. Knowledge of proper loading techniques and forklift weight capacities. Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions. Ability to coordinate and complete basic Transportation Movement Request (TMR). Prior experience in working with a multi-national workforce Ability to extract information to produce reports. Ability to communicate with a wide variety of colleagues and customers. Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility. Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules. Cross-cultural sensitivity with an international perspective. Excellent organizational and time management skills. Computer skills, specifically in Microsoft Word and Excel. Ability to become an active and functioning member of a team. Ability to be innovative and be an agent for change. Expert communication skills to facilitate and disseminate information. Education: A high school diploma or GED. Passport, Licenses and Certifications: As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers license from Home of Record. Security Vetting: Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract. Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures. Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment. DESIRED: Relevant overseas contract experience. Previous work experience in harsh environmental conditions are a plus. Experience working with Amentum. OTHER RESPONSIBILITIES Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job. WORKING AND LIVING CONDITIONS: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120- 130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and duck &amp; cover during emergencies without putting oneself or others at risk.</p><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver's license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical Maintenance Mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical Maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required by employer and customer for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience: <ul> <li><strong>Electrical maintenance mechanic:</strong> Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools). Ability to read electronic schematics. O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> <li><strong>Networking, IT & information systems:</strong> Two years’ experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered. CCIE certification with fiber optic certification is preferred.</li> <li><strong>Mechanical maintenance:</strong> Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required. O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes, aerial lift, forklift, industrial generator sets.</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) / Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have experience on 34M aerostat.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network+ or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes, aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Program logistics and property manager overview</h4> <p>The program logistics and property manager will be primarily based in Baghdad, Iraq. The logistics and property manager will manage all supply chain services, including acquisitions, receiving, stocking, inventorying, issuing, and shipment of goods, utilizing resources to accomplish operational requirements. The logistics and property manager will report to program management to manage multiple geographical sites and functions to support critical client mission activities of this contract. The logistics and property manager is specifically accountable for proactively identifying, analyzing, and correcting systemic performance concerns, and for providing structured performance briefings to the program manager and business group vice president to ensure sustained contract compliance and mission readiness.</p> <h4>Duties</h4> <ul> <li>Ensure proper material controls are in place, and operations are following established scope of work (SOW), standard operating procedures (SOP), and occupational health and safety administration (OSHA) standards.</li> <li>Establish and maintain department performance baselines and key performance indicators (KPIs) for all logistics and property functions; conduct monthly trend analysis to proactively identify and address performance degradation before it impacts the embassy mission at BEC.</li> <li>Ensure equipment and material shipments are actively tracked and provide timely updates to program management, operations, construction, and other stakeholders as required to ensure all delivery delays are monitored and adjusted for.</li> <li>Review status of projects and budgets; manage schedules and prepare status reports to brief program stakeholders of performance, compliance, and anticipated gaps.</li> <li>Proactively escalate emerging performance risks and negative trends to the project manager and business group vice president through structured weekly and monthly briefings, ensuring leadership visibility and enabling timely corrective intervention.</li> <li>Assess project issues and develop resolutions to meet productivity, quality, and client-satisfaction goals and objectives. Collect, analyze, and summarize data for report preparation and submit written reports.</li> <li>Prepare and deliver structured quarterly performance briefings to the project manager and business group vice president covering KPI status, trend analysis, corrective actions in progress, workforce performance metrics, and forecasted risks to logistics operations at BEC.</li> <li>Conduct formal root cause analysis (RCA) for recurring logistics failures or chronic performance shortfalls; develop, implement, and track written corrective action plans (CAPs) with defined milestones, responsible parties, and completion timelines; report CAP status to program management at defined intervals.</li> <li>Direct the work of a diverse employee population assigned to the program.</li> <li>Responsible for coordinating subordinate employee recruitment, selection and training, performance assessment, work assignments, salary, and recognition/disciplinary actions.</li> <li>Identify chronic under-performance within the department workforce; develop and execute performance improvement plans (PIPs) with documented benchmarks, supervisory oversight, and outcome tracking to restore performance standards and prevent recurrence.</li> <li>Ensure that common supplies, materials, equipment, and services are procured from local and regional supply markets to the maximum extent practicable.</li> <li>Maintain effective, timely, and respectful communication and interaction with other employees and managers and support other organizations.</li> <li>Additional tasks and special projects as assigned.</li> </ul> <h4>Required experience</h4> <ul> <li>Minimum acceptable experience level: ten (10) years’ progressive experience, including staff management, in a high volume, multi-unit receiving/inventory or supply management environment.</li> <li>Demonstrated ability to achieve high standards of customer service while representing the company to customers.</li> <li>Demonstrated experience establishing, implementing, and managing formal performance improvement programs that address department deficiencies, restore contract compliance, and sustain corrected performance over time.</li> <li>Experience with supply chain management (SCM) systems particularly in relation to accurate inventory management.</li> <li>Experience developing, implementing, monitoring, evaluating, and driving the adoption of logistics processes as prescribed in the operations plan.</li> <li>Experience working independently with various functions and disciplines of supply chain and operations.</li> <li>Experience with business intelligence and data analysis, and research using the MS Office suite of programs.</li> </ul> <h4>Knowledge, skills, and abilities</h4> <ul> <li>Knowledge of all principles and processes involved in operating and supporting supply chain functions at a large-scale overseas facility.</li> <li>Knowledge of the FAR and industry leading practices regarding government property. Ability to clearly and concisely articulate services/requirements in writing.</li> <li>Successful management of multiple sites in geographically dispersed locations operating in an environment of constant change.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast-paced and constantly changing environment.</li> <li>Ability to develop, monitor, and present department performance metrics using data-driven methods; demonstrated experience conducting trend analysis and presenting findings with actionable recommendations to senior program leadership (PM and VP level).</li> <li>Knowledge of corrective action plan (CAP) development, implementation, and tracking methodologies applicable to government property and logistics programs operating under FAR-based contracts in high-security, overseas environments.</li> </ul> <h4>Education</h4> <ul> <li>A high school diploma or GED.</li> <li>An undergraduate degree is preferred but can be replaced with additional years of business administration, operations, supply chain management, government property administration, or a similar discipline preferred.</li> </ul> <h4>Licenses and certifications</h4> <ul> <li>Valid drivers’ license from home of record.</li> <li>NPMA certification or ability to obtain within one year – CPPA (Certified Professional Property Administrator).</li> </ul> <h4>Desired qualifications</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> <li>Experience working with MAXIMO and/or AMRO systems.</li> </ul> <h4>Security and other requirements</h4> <ul> <li>Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Expert professional, oral and written English communication skills to present, facilitate, and disseminate information.</li> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li> </ul> <h4>Other responsibilities</h4> <ul> <li><strong>Safety:</strong> Enforce a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. Each employee must conform to the quality policy and carry out job activities in compliance with applicable quality system documents and customer contracts. Each employee must read and understand their quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</li> </ul> <h4>Working and living conditions</h4> <p>This position is in an austere environment with harsh and dangerous conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>