وظائف لخريجي كلية الهندسة في العراق

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Position: Deputy Production Manager<br> Department: Subsurface<br> Location: Basra, Iraq<br> Duration: 12 months renewable<br> Rotation: 28/28<br> <br> <strong>Role Synopsis&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </strong><br> The Deputy Production Manager is responsible for the development and management of production delivery. The role reports to the Deputy Subsurface Manager &amp; the General Manager and includes 8 direct reports, consisting of Iraqi nationals and International Expats.<br> <br> <strong>Key Accountabilities&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; </strong><br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Lead production agenda: Leading the production agenda ensuring short- and long-term commitments are in accordance with the ERP, Annual Workplan &amp; Budget and safety standards. Lead monthly GM production reviews, working with other departments and HoD’s to ensure ownership and management of production and losses are being done efficiently<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Production performance management: Hold subsurface teams (New Well Delivery, Reservoir Management, Base Management) and other departments (Ops, Wells, Projects) accountable to ensure production targets are being met<br> o&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Communicate potential production delivery risks proactively to ensure senior management can respond to challenges in timely manner<br> o&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Initiate and implement learnings from performance workshops into the organisation to ensure production is maintained at predicted levels<br> o&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Ensure production opportunities are benchmarked and selected as per highest value and cost efficiencies enabling optimum production within capital constrained environment<br> Explore, appraise, trial and integrate production-adding innovations into enabling rate-, cost- and/or safety improvements&nbsp;<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Drive best practices: Manage the production management team to ensure production planning, forecasting and hydrocarbon accounting is conducted at best practices<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capability building: Mentor and develop the Production Management Team (6 Iraqi staff + 2 Expat positions) to support the nationalisation and ‘Excellence’ agenda.<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Subsurface leadership: Act as a member of the Subsurface Leadership team and lead Performance Management initiatives.<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Drive transformation: Lead Modernisation and Transformation strategy within the Production performance, ensuring all key production metrics are visible within the organisation to support decision making. Promote agile ways of working within the Production Management team.<br> <br> <strong>Criteria &amp; Qualifications&nbsp;&nbsp;&nbsp;&nbsp; </strong><br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; University Degree in an Engineering discipline. MSc desirable<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Track record of Safety Leadership<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Proven Risk management responsibilities and proven ability to apply strategic thinking and prioritization<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Deep discipline knowledge encompassing the full breadth of departmental activities<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Proven track record of delivery and wide-ranging cross-functional experience working in integrated, fast paced working environment<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Fluent English and good presentation skills with effective interdisciplinary communication and oilfield development skills<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Strong communication skills and presentation techniques<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Proficient in hiring, coaching and mentoring personnel<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; People management and influencing skills (including technical and leadership development experience)<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Experience in driving the M&amp;T agenda of a department/business<br> •&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Ability to manage high activity environment with tight deadlines<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for a Project Manager to join its Iraq business unit focusing on creating delivery excellence across assigned project, provide certainty and confidence to the customer robust control of project scope, schedule, cost and risk.&nbsp;<br> This is a full-time onsite position in Basra, Iraq, on 28*28 rotation, with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is currently recruiting for a Project Manager to join its Iraq business unit focusing on creating delivery excellence across assigned project, provide certainty and confidence to the customer robust control of project scope, schedule, cost and risk.&nbsp;<br> This is a full-time onsite position in Basra, Iraq, on 28*28 rotation, with travel requirement.</p><br><p><i><strong>#Wood #Iraq #Basra #Project Manager</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Project Manager to join our&nbsp;Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><p>Create&nbsp;delivery&nbsp;excellence&nbsp;across&nbsp;assigned&nbsp;project,&nbsp;provide&nbsp;certainty&nbsp;and&nbsp;confidence&nbsp;to&nbsp;the customer robust control of project scope, schedule, cost and risk.</p><br><p>Specifies and coordinates the implementation and completion of the project.&nbsp;This includes responsibility for safe delivery, ensuring&nbsp;that&nbsp;quality,&nbsp;schedule,&nbsp;and cost&nbsp;targets&nbsp;are&nbsp;met&nbsp;and&nbsp;for&nbsp;managing&nbsp;the&nbsp;associated&nbsp;risk.&nbsp;Responsible for delivery of project to agreed specifications, for managing change and customer relationships, and ensuring appropriate reporting and governance is adhered to and controlled.&nbsp;</p><br><p><strong>Key Accountabilities and Responsibilities:</strong></p><br><p><strong>Project&nbsp;Execution</strong></p><br><ul> <li>Contributes&nbsp;to&nbsp;and&nbsp;reviews&nbsp;the&nbsp;project&nbsp;proposal&nbsp;and&nbsp;plan&nbsp;to&nbsp;determine&nbsp;timeframe,&nbsp;procedures&nbsp;for accomplishing the project, staffing requirements, and allotment of available resources to various phases of the project.&nbsp;Contributes to setting project evaluation parameters.</li> <li>Negotiates changes to project scope or specification with the customer. Follows Change Management&nbsp;process&nbsp;to&nbsp;identify&nbsp;and&nbsp;approve&nbsp;modifications&nbsp;to&nbsp;scope,&nbsp;cost,&nbsp;schedule&nbsp;and&nbsp;quality.</li> <li>Pursue&nbsp;and&nbsp;develop&nbsp;opportunities&nbsp;for&nbsp;innovation,&nbsp;such&nbsp;as&nbsp;digitalisation&nbsp;and&nbsp;technology&nbsp;use,&nbsp;work share and high value engineering centres, to bring value to Wood and customer</li> <li>Establishes&nbsp;project&nbsp;procedures&nbsp;and&nbsp;leads&nbsp;production&nbsp;of&nbsp;project&nbsp;execution&nbsp;plan&nbsp;including&nbsp;the&nbsp;scope of work, deliverables list, master schedule, budget, org charts, risk register etc</li> <li>Regularly&nbsp;reports&nbsp;project&nbsp;progress&nbsp;to&nbsp;senior&nbsp;management&nbsp;and/or&nbsp;the&nbsp;customer.</li> <li>Reponsible&nbsp;for&nbsp;delivery&nbsp;of&nbsp;agreed&nbsp;schedule&nbsp;and&nbsp;financial&nbsp;performance,&nbsp;proactively&nbsp;intervening&nbsp;to avoid slippage</li> <li>Ensures&nbsp;competence&nbsp;of&nbsp;project&nbsp;team&nbsp;members&nbsp;to&nbsp;carry&nbsp;out&nbsp;assigned&nbsp;work</li> <li>Leads&nbsp;ongoing&nbsp;focus&nbsp;on&nbsp;risk&nbsp;identification&nbsp;and&nbsp;mitigation&nbsp;during&nbsp;project&nbsp;execution</li> <li>Responsible&nbsp;for&nbsp;the&nbsp;project&nbsp;HSSE&nbsp;leadership, ensures&nbsp;a&nbsp;program&nbsp;of&nbsp;initiatives&nbsp;and&nbsp;auditing&nbsp;schedule are established and that HSSE and quality management issues are proactively addressed</li> <li>Guides&nbsp;and&nbsp;directs&nbsp;a&nbsp;multidiscipline&nbsp;project&nbsp;team,&nbsp;which&nbsp;may&nbsp;include&nbsp;external&nbsp;specialists&nbsp;and&nbsp;involve staff from multiple offices and sites</li> <li>Responsible&nbsp;for&nbsp;ensuring&nbsp;project&nbsp;team&nbsp;members&nbsp;are&nbsp;competent&nbsp;to&nbsp;carry&nbsp;out&nbsp;assigned&nbsp;duties</li> <li>Promotes&nbsp;and&nbsp;sets&nbsp;up&nbsp;performance&nbsp;improvement&nbsp;culture&nbsp;and&nbsp;actions&nbsp;on&nbsp;complex&nbsp;projects&nbsp;and&nbsp;into their supply chains.</li> <li>Facilitates&nbsp;the&nbsp;set&nbsp;up&nbsp;of&nbsp;information&nbsp;management&nbsp;systems&nbsp;/&nbsp;applications&nbsp;as&nbsp;applicable&nbsp;to&nbsp;suit various life phases of projects and manage information management project team</li> <li>Participate&nbsp;in&nbsp;assurance&nbsp;activities&nbsp;and&nbsp;peer&nbsp;reviews</li></ul><p><strong>Leadership</strong></p><br><ul> <li>Is&nbsp;a&nbsp;champion&nbsp;and&nbsp;role&nbsp;model&nbsp;for&nbsp;ethical&nbsp;behaviour&nbsp;and&nbsp;compliance&nbsp;with&nbsp;applicable&nbsp;laws&nbsp;and policies.</li> <li>Oversees&nbsp;proposals&nbsp;and&nbsp;call-offs&nbsp;(may&nbsp;be&nbsp;individual&nbsp;projects)&nbsp;within&nbsp;delegation&nbsp;of&nbsp;authority, ensuring compliance with contracting policy and standards of ethical conduct.</li> <li>Coaches,&nbsp;mentors&nbsp;and&nbsp;empowers&nbsp;others&nbsp;to&nbsp;make&nbsp;decisions&nbsp;within&nbsp;established&nbsp;parameters</li></ul><p><strong>Working Relationships:</strong></p><br><p><strong>Internal:</strong></p><br><ul> <li>Provides&nbsp;the&nbsp;interface&nbsp;and&nbsp;maintains&nbsp;effective&nbsp;relationships&nbsp;with&nbsp;other&nbsp;contributors&nbsp;to&nbsp;the&nbsp;project.</li> <li>Guides&nbsp;and&nbsp;directs&nbsp;project&nbsp;team&nbsp;and&nbsp;functional&nbsp;support&nbsp;teams&nbsp;as&nbsp;required</li> <li>Interfaces&nbsp;with&nbsp;high&nbsp;value&nbsp;engineering&nbsp;centres&nbsp;(HVEC) as&nbsp;required&nbsp;and&nbsp;manages&nbsp;scope&nbsp;across&nbsp;all offices involved</li> <li>Interface&nbsp;and&nbsp;coordinate&nbsp;with&nbsp;Operational&nbsp;and/or&nbsp;Contract&nbsp;Management&nbsp;to&nbsp;ensure&nbsp;delivery&nbsp;of operational goals</li></ul><p><strong>External:</strong></p><br><ul> <li>Primary&nbsp;point&nbsp;of&nbsp;contact&nbsp;for customer&nbsp;on&nbsp;assigned&nbsp;scope.&nbsp;Establishes&nbsp;and&nbsp;maintains&nbsp;a&nbsp;positive&nbsp;and effective customer relationship, ensuring payment terms are met, and communicating any delays</li> <li>Manage&nbsp;relationships&nbsp;with&nbsp;external&nbsp;suppliers&nbsp;and&nbsp;sub-contractors&nbsp;and&nbsp;resolves&nbsp;cost,&nbsp;schedule&nbsp;and quality issues</li> <li>Seeks&nbsp;out&nbsp;new&nbsp;avenues&nbsp;for&nbsp;building&nbsp;internal&nbsp;and&nbsp;external&nbsp;relationships</li> <li>Monitors&nbsp;existing&nbsp;relationships</li> <li>May&nbsp;act&nbsp;as&nbsp;company&nbsp;representative&nbsp;and&nbsp;play&nbsp;a&nbsp;role&nbsp;in&nbsp;contract&nbsp;negotiations,</li> <li>Influences&nbsp;relationships&nbsp;at&nbsp;higher&nbsp;customer&nbsp;level</li></ul><p><strong>Level of Influence and Decision-Making Authority:</strong></p><br><ul> <li>Actions&nbsp;and&nbsp;decisions&nbsp;typically&nbsp;have&nbsp;a&nbsp;significant&nbsp;influence&nbsp;on&nbsp;the&nbsp;technical,&nbsp;operational&nbsp;and financial results of one or more small and medium-size projects</li> <li>Works&nbsp;under&nbsp;limited&nbsp;supervision</li> <li>Work&nbsp;is&nbsp;performed&nbsp;under&nbsp;general&nbsp;direction&nbsp;and&nbsp;is&nbsp;reviewed&nbsp;for&nbsp;conformance&nbsp;with&nbsp;policies&nbsp;and general efficiency</li> <li>Keeps&nbsp;manager&nbsp;informed&nbsp;of&nbsp;progress,&nbsp;potentially&nbsp;controversial&nbsp;matters&nbsp;and&nbsp;far-reaching implications</li> <li>Solves&nbsp;problems&nbsp;requiring&nbsp;an&nbsp;understanding&nbsp;of,&nbsp;financial&nbsp;and&nbsp;commercial&nbsp;implications</li> <li>Solves&nbsp;problems&nbsp;requiring&nbsp;understanding&nbsp;of&nbsp;social&nbsp;and&nbsp;political&nbsp;implications&nbsp;and&nbsp;international issues</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li> <p>University&nbsp;degree&nbsp;in&nbsp;relevant&nbsp;discipline</p><br></li> <li> <p>Project&nbsp;Management&nbsp;Professional&nbsp;(PMP),&nbsp;Associate&nbsp;in&nbsp;Project&nbsp;Management&nbsp;(APM) or&nbsp;equivalent certification is preferred</p><br></li></ul><p><strong>Knowledge,&nbsp;skills&nbsp;and&nbsp;experience:</strong></p><br><ul> <li>Minimum of 15 years’ experience in the Oil and Gas Industry&nbsp;</li> <li>Proven&nbsp;project&nbsp;management&nbsp;experience&nbsp;as&nbsp;well&nbsp;as&nbsp;a&nbsp;good&nbsp;understanding&nbsp;of&nbsp;business&nbsp;issues.</li> <li>Good understanding of technical work scopes and commercial aspects of projects required.&nbsp;</li> <li>Iraq or Middle East experience preferred but not essential.</li> <li>Good stakeholder management and able to coach and advise others in this area.</li></ul><p><strong>Personal Attributes:</strong></p><br><ul> <li>Safety focused with an uncompromising approach to risk management. Places the welfare of both internal and customer employees at the top of the agenda.</li> <li>Passionately and visibly pursues, supports, demonstrates, and embeds company values.</li> <li>A motivated self-starter, who can self-direct when required, able to use own initiative to make appropriate decisions but also know when escalation is required.</li> <li>Able to make decisions, lead execution, take initiative and seek out improvements&nbsp;</li> <li>Committed to drive projects to completion, taking ownership for all that occurs within it.</li> <li>Strong Team Builder- able to motivate, engage and influence a diverse group of people.&nbsp;</li> <li>Able to adapt to changing priorities.</li> <li>Strong planning, organising and execution skills.</li> <li>Good communicator both verbally and in written form.</li> <li>Customer focused – develops sincere and open relationships with customers.&nbsp;</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Are you ready to shape the future with confidence?</b></p><br><p>Here at EY, you’ll have the chance to build a truly exceptional experience. We’ll empower you with the latest technology, surround you with high-performing teams, and provide the global scale and diverse and inclusive culture you need to discover your full potential. Through our coaching and training programs, you’ll develop the skills you need to stay relevant today and, in the future, – all while building a network of colleagues, mentors, and leaders who will be on the journey with you at EY and beyond.</p><br><p><b>The opportunity: your next adventure awaits </b></p><br><p>You will be joining one of the most dynamic and people-focused teams in the industry. In <b>People Advisory Services (PAS)</b>, we help organizations transform their workforce strategies, enhance employee experiences, and navigate the complexities of global mobility and compliance. Our work spans HR transformation, payroll, rewards, learning, immigration, tax compliance, and international mobility—delivering insights that align talent with business strategy and drive sustainable growth. </p><br><p><b>What we look for: </b></p><br><ul><li><b>You have an agile, growth-oriented mindset. </b>What you know matters. But the right mindset is just as important in determining success. We’re looking for people who are innovative, can work in an agile way and keep pace with a rapidly changing world.</li><li><b>You are curious and purpose driven.</b> We’re looking for people who see opportunities instead of challenges, who ask better questions to seek better answers.</li><li><b>You are inclusive.</b> We’re looking for people who seek out and embrace diverse perspectives, who value differences, and team inclusively to build safety and trust. </li><li><b>Qualifications:</b> <ul><li>Bachelor’s or master’s degree completed in Accounting, Industrial Engineering, Business Administration, or any business-related major within the past 18 months</li><li>Nationals only to be considered</li></ul></li></ul><p><b>What’s in it for you: </b></p><br><ul><li>Accelerate your technical capabilities and transformative leadership skills with future-focused courses and development programs.</li><li>Broaden your horizons by working on highly integrated teams across the globe and collaborate with people of diverse backgrounds — both professionally and culturally.</li><li>Bring out the best in yourself with continuous investment in your personal well-being and career development.</li><li>Develop your own personal purpose and help us create a positive ripple effect on our teams, our business, clients and society.</li></ul><p><b>Are you ready to shape your future with confidence? Apply today.</b></p><br><b>Step 1: Apply</b><ul><li>Please complete the online application and answer all the questions.</li></ul><b>Step 2: Test</b><ul><li>If selected, you will receive an invitation to complete the EY online assessments. </li></ul><b>Step 3: On Demand Interview</b><ul><li>Upon passing the assessments, you will receive an invitation for an initial interview.</li></ul><b>Step 4: Attend</b><ul><li>If shortlisted, you may be invited to attend a recruitment day or a technical interview. </li></ul><b>Step 5: Receive</b><ul><li>If successful, you will receive an offer to join EY and begin your career at one of the best companies to work for.</li></ul><p>Are you ready to shape your future with confidence? Apply today. </p><br><p>To help create an equitable and inclusive experience during the recruitment process, please inform us as soon as possible about any disability-related adjustments or accommodations you may need.</p><br><p>For further information, and to apply, please visit our website via the “Apply” button below.</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Are you ready to shape the future with confidence?</b></p><br><p>Here at EY, you’ll have the chance to build a truly exceptional experience. We’ll empower you with the latest technology, surround you with high-performing teams, and provide the global scale and diverse and inclusive culture you need to discover your full potential. Through our coaching and training programs, you’ll develop the skills you need to stay relevant today and, in the future, – all while building a network of colleagues, mentors, and leaders who will be on the journey with you at EY and beyond.</p><br><p><b>The opportunity: your next adventure awaits </b></p><br><p>You will be joining one of the most dynamic and people-focused teams in the industry. In <b>People Advisory Services (PAS)</b>, we help organizations transform their workforce strategies, enhance employee experiences, and navigate the complexities of global mobility and compliance. Our work spans HR transformation, payroll, rewards, learning, immigration, tax compliance, and international mobility—delivering insights that align talent with business strategy and drive sustainable growth. </p><br><p><b>What we look for: </b></p><br><ul><li><b>You have an agile, growth-oriented mindset. </b>What you know matters. But the right mindset is just as important in determining success. We’re looking for people who are innovative, can work in an agile way and keep pace with a rapidly changing world.</li><li><b>You are curious and purpose driven.</b> We’re looking for people who see opportunities instead of challenges, who ask better questions to seek better answers.</li><li><b>You are inclusive.</b> We’re looking for people who seek out and embrace diverse perspectives, who value differences, and team inclusively to build safety and trust. </li><li><b>Qualifications:</b> <ul><li>Bachelor’s or master’s degree completed in Accounting, Industrial Engineering, Business Administration, or any business-related major within the past 18 months</li><li>Nationals only to be considered</li></ul></li></ul><p><b>What’s in it for you: </b></p><br><ul><li>Accelerate your technical capabilities and transformative leadership skills with future-focused courses and development programs.</li><li>Broaden your horizons by working on highly integrated teams across the globe and collaborate with people of diverse backgrounds — both professionally and culturally.</li><li>Bring out the best in yourself with continuous investment in your personal well-being and career development.</li><li>Develop your own personal purpose and help us create a positive ripple effect on our teams, our business, clients and society.</li></ul><p><b>Are you ready to shape your future with confidence? Apply today.</b></p><br><b>Step 1: Apply</b><ul><li>Please complete the online application and answer all the questions.</li></ul><b>Step 2: Test</b><ul><li>If selected, you will receive an invitation to complete the EY online assessments. </li></ul><b>Step 3: On Demand Interview</b><ul><li>Upon passing the assessments, you will receive an invitation for an initial interview.</li></ul><b>Step 4: Attend</b><ul><li>If shortlisted, you may be invited to attend a recruitment day or a technical interview. </li></ul><b>Step 5: Receive</b><ul><li>If successful, you will receive an offer to join EY and begin your career at one of the best companies to work for.</li></ul><p>Are you ready to shape your future with confidence? Apply today. </p><br><p>To help create an equitable and inclusive experience during the recruitment process, please inform us as soon as possible about any disability-related adjustments or accommodations you may need.</p><br><p>For further information, and to apply, please visit our website via the “Apply” button below.</p><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior QA/QC Manager leads in the development of strategies and processes of QA/QC department by implementing policies, procedures, regulations of quality control work and supervisory techniques to ensure that work is executed within specific methods, project quality plan guidelines and procedures that can assure high quality of services and products, customer satisfaction, continuous improvement of processes and services.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Prepare and maintain project QA/QC plan to meet the project quality requirements.</p><br> <p>Establish project quality objectives in line with IMS corporate objectives; monitors submittal status of QA/QC reports and reviews all technical submittals.</p><br> <p>Build and implement a control system for suppliers and subcontractors and conducts site audits.</p><br> <p>Attend all required/related meetings and arranges all project Quality requirements with the project owner, consultant, and project management team.</p><br> <p>Oversee the review material submittals and method statements submitted by the contractor to ensure the quality requirements set on the project is met.</p><br> <p>Prepare the project QA/QC plan and supervise all amendments and revisions in order to meet the project quality requirements and client’s expectations.</p><br> <p>Ensure to prepare the project QA/ QC plan within 30 days from the start of contract and get it approved from the consultant.</p><br> <p>Prepare the project QA/QC plan and supervise all amendments and revisions in order to meet the project quality requirements and client’s expectations.</p><br> <p>Ensure to prepare the project QA/ QC plan within 30 days from the start of contract and get it approved from the consultant.</p><br> <p>Ensure that review is undertaken on a quarterly or on a need basis.</p><br> <p>Ensure to supervise all amendments and track and record revisions to the QA/ QC plan after any amendment and issue to all concerned parties.</p><br> <p>Establish project quality objectives in line with IMS corporate objectives and ensure to monitor submittals of QA/QC reports.</p><br> <p>Ensure to prepare, review and amend quality objectives as per client requirements within 30 days of the start of the project and ensures its alignment with corporate QMS objectives.</p><br> <p>Build and implement a control system for suppliers and subcontractors</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><p>Identifies staff development and training needs and ensures that trainings are obtained.</p><br> <p>Ensures to prepare during the beginning of the project the project training matrix and ensure that all trainings are carried out as planned.</p><br> <p>Ensures to monitor the effectiveness of the trainings on a need basis or minimum bi- annual basis.</p><br> <p>Manages to attend all required/related meetings and arrange all project Quality requirements with the project owner, consultant, project management.</p><br> <p>Ensures 100% coordination with project owner/ consultant/project management at all times and ensure that weekly scheduled meetings are carried out, and all records are documented; attendance sheets, minutes …etc.</p><br> <p>Ensures that all actions recorded in the minutes of meetings are followed up.</p><br> <p>Implements IMS procedures at project sites.</p><br> <p>Ensures that all QMS processes are followed, all approved forms are filled and all documents are generated as per the company procedures.</p><br> <p>Ensures that QMS trainings are carried out for all concerned staff of the project and all site staff and new joiners are complying 100% with the QMS requirements.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Comprehensive understanding of quality assurance and quality control principles, methodologies, and regulatory requirements.</p><br> <p>Strong leadership and managerial skills to oversee QA/QC teams, develop processes, and ensure compliance with standards.</p><br> <p>Excellent analytical abilities to identify quality issues, analyze root causes, and implement corrective actions.</p><br> <p>Proficiency in quality management systems and tools to monitor and improve product quality and processes.</p><br> <p>Effective communication and collaboration skills to liaise with internal teams, suppliers, and regulatory agencies to maintain quality standards.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 years working experience, 5 years in a relevant supervisory position, 2 years GCC experience is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Quality Assurance L4<br>Statistical Quality Control L4<br>Sub-contractor Quality Management L4<br>Total Quality Management L4<br>QA Audits L4<br>Build High-Performing Teams<br>Provide Direction<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Civil Engineering or in any Engineering related discipline (e.g. Mechanical, Electrical)<br>Professional Qualification in Lead Auditor certification (ISO 9001 or equal) or ASQC certification (CQM/CQE).<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision from the Production Manager,</p><br> <ul> <li>The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields.</li> <li>Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies.</li> <li>Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team.</li> <li>Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment.</li> <li>Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques.</li> <li>Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment.</li> <li>Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs.</li> <li>Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems.</li> <li>Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards.</li> <li>Develops and maintains good working relationships with Production Team through effective communication and teamwork.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply.</li> <li>Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</li> </ul><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210433&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Role Purpose <br> <p><span>Zain Iraq is actively recruiting to hire a Senior Product Designer - Digital Platforms to turn product vision and business priorities into specifications precise enough to build from. The role owns the documentation bridge between what the business asks for and what technology teams deliver.</span></p><br><p><span>The role is responsible for defining features through user stories, functional and technical requirements, and acceptance criteria that leave no room for interpretation, and for confirming feasibility with technology teams before development begins.</span></p><br><p><span>This is a technical specification and documentation role, distinct from Experience Design. The role owns the precision of what is defined and the responsibility that what gets built is what was asked for.</span></p><br> <br> <br><br> Responsibilities <br> <ul><li><p><span>Translate the product vision and business priorities set by product owners into detailed product requirements and specifications.</span></p><br></li><li><p><span>Define features through comprehensive user stories setting out functional and technical requirements, including edge cases, error states and dependencies.</span></p><br></li><li><p><span>Develop acceptance criteria precise enough for quality assurance to test against and for technology teams to build from without interpretation.</span></p><br></li><li><p><span>Create and maintain product documentation as the single reference point for each feature, keeping it current as scope changes.</span></p><br></li><li><p><span>Work with technology teams to assess feature feasibility before development begins and resolve gaps between business intent and technical constraints.</span></p><br></li><li><p><span>Identify and document API, data, and third-party dependencies within the specification, so they are known before build rather than discovered during it.</span></p><br></li><li><p><span>Ensure technical constraints and integration requirements are reflected in the requirement itself and flag any dependency that affects deliverability.</span></p><br></li><li><p><span>Ensure backlog items meet the definition of ready before they are committed to a sprint, so development is never held up by an incomplete specification.</span></p><br></li><li><p><span>Contribute requirement detail to backlog refinement, resolving ambiguity before items enter development.</span></p><br></li><li><p><span>Provide requirement clarification on demand during build, at the point the question arises.</span></p><br></li><li><p><span>Review delivered features against the specification and acceptance criteria, and confirm the build matches the intent before sign-off.</span></p><br></li><li><p><span>Gather and analyses stakeholder requirements with product owners and convert them into actionable user stories.</span></p><br></li><li><p><span>Maintain the specification pipeline so requirements are documented ahead of development need.</span></p><br></li><li><p><span>Coordinate with Experience Design so that user journeys and interface designs are reflected accurately in the specification.</span></p><br></li><li><p><span>Challenge requirements that are unclear, conflicting, or commercially unjustified before they enter the backlog.</span></p><br></li><li><p><span>Work with the teams to define tracking and success metrics for each feature at the specification stage rather than after launch.</span></p><br></li><li><p><span>Evaluate feature adoption and usage against the metrics defined and specify iterative improvements.</span></p><br></li><li><p><span>Work with the quality assurance teams so that acceptance criteria, test conditions and defect resolution stay aligned to product intent.</span></p><br></li><li><p><span>Set and maintain the specification standards, templates and documentation conventions used across digital platforms.</span></p><br></li><li><p><span>Present feature scope, progress and performance to stakeholders in terms of business outcome rather than technical detail.</span></p><br></li></ul> <br> <br><br> Education, Experience, and Competencies <br> <p><strong><span>Education</span></strong></p><br><ul><li><p><span>Bachelor’s degree in Computer Science, Information Systems, Engineering, Business or a related discipline.</span></p><br></li></ul><p><strong><span>Experience</span></strong></p><br><ul><li><p><span>5+ years of experience in product management, business analysis, product ownership, or technical product specification for digital products.</span></p><br></li><li><p><span>Proven ability to define user stories, functional/technical requirements, and acceptance criteria for technology teams.</span></p><br></li><li><p><span>Experience working with Agile teams (Scrum/Kanban) and cross-functional stakeholders, including Product, Design, Development, and QA.</span></p><br></li><li><p><span>Experience specifying consumer-facing mobile and web products, including understanding APIs, data flows, dependencies, feasibility, and technical constraints.</span></p><br></li><li><p><span>Proficiency in JIRA, Confluence, Azure DevOps, and familiarity with Figma.</span></p><br></li><li><p><span>Strong analytical and documentation skills, with the ability to identify requirement gaps and translate data insights into product improvements.</span></p><br></li><li><p><span>Experience in telecom, fintech, e-commerce, or high-volume digital products is an advantage.</span></p><br></li></ul><p><strong><span>Competencies</span></strong></p><br><p><span>Behavioral</span></p><br><ul><li><p><span>Analytical Thinking</span></p><br></li><li><p><span>Problem Solving and Creativity</span></p><br></li><li><p><span>Initiative</span></p><br></li><li><p><span>Teamwork</span></p><br></li><li><p><span>Communication and Presentation</span></p><br></li><li><p><span>Relationship Building</span></p><br></li></ul><p><span>Technical</span></p><br><ul><li><p><span>Product Management</span></p><br></li><li><p><span>Technology Application</span></p><br></li><li><p><span>Project/Program Management</span></p><br></li><li><p><span>Business Modelling and Analysis</span></p><br></li><li><p><span>IT User Support</span></p><br></li><li><p><span>Strategic Planning</span></p><br></li></ul><p><span>IDE Competency</span></p><br><ul><li><p><span>Courage to Engage</span></p><br></li><li><p><span>Addressing Bias</span></p><br></li><li><p><span>Allyship</span></p><br></li></ul> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>MedSSI Administrative Assistant - UDS Coordinator<br><br>Job Posting Description<br><p><b>Belong, Connect, Grow, with KBR! </b></p><br><br><br><p><b>Program Summary</b></p><br><br><p>The Diplomatic Platform Support Services (DiPSS) works in support of the Department of State to provide medical support services. The primary scope of this program is to execute medical support services at the United States Embassy and adjacent facilities in the Middle East.</p><br><br><p><b>Job Summary</b></p><br><br><br><p>The Administrative Assistant - UDS Coordinator responsibilities may be unique to a specific function or department such as Procurement or Engineering but are mainly administrative in nature.</p><br><br><br><p><b>Roles and Responsibilities </b></p><br><br><ul><li>Serve as Client point of contact regarding UDS concerns.</li><li>Manage UDS Schedule specifically on updates with additional donors and cancelations</li><li>Respond to donor and process prescription</li><li>Filing UDS scanned Rapid /Coc Form</li><li>Upload Donors data for processing specimen result</li><li>MRO point of contact between donors</li><li>Submit prescription Rapid/COC form to MRO</li><li>Notify client on DER assist with Non-Negative Medical Review</li><li>Delivering Specimen result</li><li>Prepare end of the month collection Report</li><li>Routine logistical support tasks such as receiving material and routing it to a responsible party.</li><li>Coordinates and implements office services, interprets and communicates operating policies.</li><li>Analyzes Health unit operating practices such as record keeping systems, forms control, office layout, and creating new systems or revising established procedures.</li><li>Locates and compiles information and formats reports, graphs, tables, records and other sources of information on excel.</li><li>Assembles and categorizes facts and figures for written computation and calculations.</li><li>Uses various software applications, such as spreadsheets to manipulate and/or format data and/or reports.</li><li>Identifies “close calls” and/or safety concerns to supervisory personnel.</li><li>Reviews and answers correspondence</li><li>Coordinates collection and preparation of operating reports such as time and attendance, terminations, and budget expenditures</li><li>Answers calls, schedules appointments, greets patients, and organizes files.</li><li>Updates and maintains patient charts</li><li>Monitors radio communication and internet communication.</li><li>Assists with the managing the day-to-day activities and prioritizing tasks.</li><li>Attends and participates in a variety of meetings and task force groups to improve quality and outcomes, communicate issues, obtain approvals, resolve problems and maintain specific level of knowledge pertaining to new developments, new task efforts, and new policy requirements.</li><li>Complies with all applicable standards and guidelines.</li><li>Operates personal computer to access e-mail, electronic calendars, and other basic office support software.</li><li>Preparing administrative correspondence and reports as required.</li><li>Other duties as assigned.</li></ul><br><p><b>Basic Qualifications </b></p><br><br><ul><li>Minimum of 3 years work experience in administration field. Some medical administration experience preferred.</li><li>Experience working with unit operating practices, such as record keeping systems</li><li>Ability to work both independently and to work positively within a team environment maintaining professionalism.</li><li>Proficiency with computer and common office equipment, as well as with MS Office products required.</li><li>Ability to adapt to sudden changes and flexibility in work requirements to include potential shift changes based on operational needs and/or command priorities.</li><li>Strong problem-<span>s</span>ol<span>v</span>ing <span>sk</span>il<span>l</span>s to re<span>se</span>ar<span>c</span>h and re<span>s</span>ol<span>v</span>e inquiri<span>e</span>s and re<span>s</span>p<span>o</span>nd in a ti<span>m</span>e<span>l</span>y <span>m</span>anner.</li></ul><br><p><b>Preferred Qualifications</b></p><br><br><ul><li>Ability to work well with <span>s</span>enior <span>m</span>anage<span>m</span>ent and a<span>c</span>ro<span>s</span>s fu<span>nct</span>ions to a<span>chi</span>e<span>v</span>e bu<span>s</span>ine<span>s</span>s obje<span>c</span>ti<span>v</span>es.</li><li>Self-<span>s</span>tarter who is a<span>c</span>ti<span>o</span>n oriented <span>a</span>nd po<span>ss</span>e<span>ss</span>es a <span>s</span>trong <span>s</span>en<span>s</span>e of ur<span>g</span>en<span>c</span>y.</li></ul><br><br><br><br><p>Belong, Connect and Grow at KBR<br>At KBR, we are passionate about our people and our Zero Harm culture. These inform all that we do and are at the heart of our commitment to, and ongoing journey toward being a People First company. That commitment is central to our team of team’s philosophy and fosters an environment where everyone can Belong, Connect and Grow. We Deliver – Together.&nbsp;</p><br><br><br><p>KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.</p><br><br><br><br><br><br> </div>

<p><h4>Job description</h4> <p><strong>Function:</strong> Information Management / IT<br> <strong>Role level:</strong> Technical Team Lead<br> <strong>Location:</strong> Majnoon Project – Site Basra<br> <strong>Primary purpose:</strong> Lead systems support, stability, security, upgrades, troubleshooting and documentation<br> <strong>Reporting:</strong> Data Centre Manager</p> <h4>Preface</h4> <p>This job description outlines the purpose, responsibilities, competencies, experience, certifications, technical skills, and language requirements for the System Team Lead role. The role is designed for a technically experienced leader who can guide system administrators and engineers while maintaining reliable, secure, and efficient IT services.</p> <h4>Professional summary</h4> <p>The System Team Lead leads and mentors system administrators and engineers, ensuring that IT systems remain stable, secure, efficient, and aligned with operational requirements. The role oversees system upgrades, troubleshooting, technical support, documentation, and best-practice adoption. It requires strong hands-on technical capability combined with leadership, planning, communication, and stakeholder coordination skills.</p> <h4>Core competencies</h4> <ul> <li>Team leadership, mentoring, coaching, and development of system administrators and engineers.</li> <li>Strong technical problem-solving and ability to manage complex troubleshooting activities.</li> <li>Operational discipline focused on stability, security, availability, and efficiency of IT systems.</li> <li>Ability to plan, coordinate, and oversee system upgrades, patching, and continuous improvement activities.</li> <li>Strong documentation discipline, including procedures, standards, runbooks, and knowledge sharing.</li> <li>Clear communication with technical teams, business users, vendors, and management stakeholders.</li> <li>Ability to prioritize technical work across incidents, maintenance, projects, and operational support.</li> </ul> <h4>Professional experience</h4> <ul> <li>Extensive experience in systems administration, infrastructure support, or IT engineering roles.</li> <li>Experience leading or mentoring system administrators, engineers, or technical support resources.</li> <li>Proven experience supporting enterprise IT systems in operational or project-based environments.</li> <li>Experience overseeing system upgrades, troubleshooting, incident resolution, and root-cause analysis.</li> <li>Experience developing best practices, technical documentation, procedures, and operational standards.</li> <li>Experience working with internal IT teams, vendors, and wider project stakeholders to maintain service continuity.</li> </ul> <h4>Key responsibilities</h4> <ul> <li><strong>Lead and mentor:</strong> Lead, guide, and mentor system administrators and engineers, supporting team capability, work allocation, and technical discipline.</li> <li><strong>Maintain stability:</strong> Ensure IT systems remain stable, secure, efficient, and available to support business and project operations.</li> <li><strong>Oversee upgrades:</strong> Coordinate system upgrades, patching, maintenance activities, and technical changes in line with operational needs.</li> <li><strong>Troubleshoot issues:</strong> Oversee complex troubleshooting, escalation management, root-cause analysis, and incident resolution.</li> <li><strong>Drive best practice:</strong> Develop, maintain, and promote best practices, technical standards, runbooks, and operational documentation.</li> <li><strong>Support governance:</strong> Contribute to IT governance, reporting, risk reduction, service improvement, and stakeholder communication.</li> </ul> <h4>Certifications</h4> <p>Relevant professional certifications are preferred where aligned to the organisation, technology stack, and project requirements. Examples include:</p> <ul> <li>Microsoft, Linux, VMware, Cisco, cloud, cyber security, or infrastructure-related certifications.</li> <li>ITIL Foundation or equivalent service management certification.</li> <li>Security-related certification such as CompTIA Security+, Microsoft Security, or equivalent is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li><strong>Systems administration:</strong> Windows Server, Linux, core infrastructure services, patching, backup, monitoring, and support.</li> <li><strong>Infrastructure operations:</strong> Virtualization, storage, compute, network services, hosting environments, and operational resilience.</li> <li><strong>Security and controls:</strong> Secure configuration, access control, vulnerability remediation, endpoint protection, and compliance support.</li> <li><strong>Troubleshooting:</strong> Incident response, escalation support, root-cause analysis, performance investigation, and service restoration.</li> <li><strong>Upgrades and maintenance:</strong> System upgrades, patch cycles, lifecycle planning, maintenance windows, and technical change coordination.</li> <li><strong>Documentation:</strong> Runbooks, SOPs, standards, technical guides, change records, and knowledge-base material.</li> </ul> <h4>Languages</h4> <p>English language proficiency required for technical documentation, reporting, stakeholder communication, and operational coordination.<br> Arabic language skills are also relevant.</p></p><p></p>

<p><h4>Position details</h4> <p><strong>Department:</strong> Wells<br> <strong>Location:</strong> Majnoon Oil Field – Basra, Iraq<br> <strong>Reports to:</strong> CWI Engineering Team Lead<br> <strong>Direct reports:</strong> None</p> <h4>1. Role purpose</h4> <p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p> <h4>2. Key responsibilities</h4> <p><strong>HSSE & well integrity</strong></p> <ul> <li>Champion a proactive safety culture with zero harm.</li> <li>Conduct site safety visits, audits, and toolbox talk reviews.</li> <li>Ensure compliance with well integrity standards such as NORSOK D-010.</li> <li>Ensure engineering designs comply with HSSE policies, life-saving rules, and well integrity guidelines.</li> <li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li> <li>Support incident investigations by providing technical analysis and recommendations.</li> </ul> <p><strong>Program development & technical assurance</strong></p> <ul> <li>Prepare and review completion programs, workover programs, and intervention procedures.</li> <li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li> <li>Ensure engineering designs comply with well integrity standards and operational requirements.</li> <li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li> </ul> <p><strong>Operational support & problem solving</strong></p> <ul> <li>Provide real-time engineering support to wellsite supervisors during operations.</li> <li>Analyze operational challenges and propose technical solutions.</li> <li>Perform pre-job and post-job reviews to ensure procedural compliance.</li> <li>Support SIMOPS planning and coordination with production, subsurface, and drilling teams.</li> </ul> <p><strong>Cost & schedule control</strong></p> <ul> <li>Support development of budgets, forecasts, and AFE inputs.</li> <li>Monitor job efficiency, performance, and operational KPIs.</li> <li>Identify cost-saving opportunities without compromising safety or quality.</li> </ul> <p><strong>Contractor & performance management</strong></p> <ul> <li>Lead technical interface with service companies and contractors.</li> <li>Evaluate technical proposals, equipment specifications, and new technologies.</li> <li>Support tendering, technical evaluations, scopes of work, and contract management.</li> <li>Monitor service quality and ensure alignment with engineering requirements.</li> </ul> <p><strong>Reporting & governance</strong></p> <ul> <li>Review technical proposals from service companies and ensure alignment with operational requirements.</li> <li>Participate in contractor performance reviews and technical evaluations.</li> <li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li> </ul> <h4>3. Qualifications & experience</h4> <ul> <li>Bachelor’s degree in petroleum, mechanical, or related engineering discipline.</li> <li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li> <li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li> <li>Strong experience leading CWI engineering teams in high-activity onshore fields.</li> <li>Comprehensive understanding of well integrity standards (e.g., NORSOK D-010), well control, and barrier management.</li> <li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li> <li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li> <li>Experience in Iraq/Majnoon preferred.</li> <li>Fluency in English; Arabic is an advantage.</li> </ul> <h4>4. Core competencies</h4> <ul> <li>CWI technical mastery</li> <li>Well integrity & risk management</li> <li>Engineering & HSSE leadership</li> <li>Performance management & continuous improvement</li> <li>Cross-functional collaboration</li> <li>Contractor & stakeholder management</li> <li>Communication & technical reporting</li> </ul></p><p></p>

<p>Act as the technical authority for all steel structure engineering matters on the project. Lead and review: Structural steel design deliverables Shop drawings and erection drawings Design calculations and technical clarifications Ensure compliance with: TotalEnergies General and Project Specifications Applicable international standards (AISC, EN, BS, AWS, ASTM, Eurocodes) Approved IFC drawings and project design criteria Ensure structural designs are optimized for constructability, safety, and costeffectiveness . Fabrication &amp; Erection Oversight Coordinate and oversee structural steel fabrication and erection activities, including: Fabrication sequences and inspection readiness Erection methodology and stability requirements Temporary works, supports, and bracing Highstrength bolting and welding interfaces Review and approve (as applicable): Fabrication method statements Erection methodologies and lifting studies Coordinate with QA/QC Structural and Welding teams to ensure full compliance with inspection and testing requirements. Coordination &amp; Interface Management Act as the main interface between: Structural engineering Construction and erection teams QA/QC and HSE departments Coordinate interfaces with: Civil works (foundations, anchor bolts, embedded plates) Mechanical and piping supports E&amp;I structural supports and platforms Participate in design reviews, constructability reviews, and value engineering sessions. Interface with TotalEnergies and PMC representatives on all steel structure technical matters. Technical Problem Solving &amp; Change Management Resolve site and fabrication technical issues such as: Misalignments Design clashes Material substitutions Review and manage Engineering Change Notices (ECNs) related to structural steel. Evaluate technical deviations and recommend corrective solutions in line with TotalEnergies approval procedures. Support delay mitigation and recovery by providing engineering input. HSE &amp; Compliance Ensure all structural engineering and site activities comply with: TotalEnergies HSE Golden Rules Project HSE Plan and PermittoWork (PTW) system Ensure structural designs and erection methods: Minimize work at height Reduce heavy lifting risks Promote safe construction practices Participate in risk assessments, HAZID/HAZOP (as applicable), and lifting reviews. Exercise stopwork authority in case of unsafe or noncompliant activities. Quality / Reporting Responsibilities Ensure structural engineering deliverables meet TotalEnergies quality requirements. Support QA/QC teams during: Inspections and audits NCR resolution and technical evaluations Review and ensure completeness of: Structural completion dossiers Asbuilt documentation Mechanical Completion (MC) deliverables Provide regular technical progress reports and engineering status updates to project management. Support internal and external audits related to structural engineering scope. Welding Knowledge is preferrable.</p><p><strong>Desired Candidate Profile</strong></p><b>Preferred candidate profile</b><p>Bachelors Degree in Civil or Structural Engineering (mandatory).</p><p>Minimum 1215 years of experience in structural steel engineering on Oil &amp; Gas or major Industrial EPC projects .</p><p>Minimum 5 years in a Lead or Senior Structural Engineering role .</p><p>Proven experience working under TotalEnergies or equivalent International Operator standards is highly preferred.</p><p>Strong EPC Contractor or PMC project background.</p><p>Expert knowledge of structural steel design, fabrication, and erection practices.</p><p>Strong command of international structural codes and standards'</p>

<p><h4>KBR Sustainable Technology Solutions (STS)</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Responsibilities:</h4> <ul> <li>Day to day delivery of mechanical engineering support for site operations.</li> <li>Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.</li> <li>Collaborates with central engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.</li> <li>Promotes a culture of open safety reporting and continuous improvement.</li> <li>Provides immediate front line support for operations and maintenance teams to resolve minor issues and escalate more significant issues to the central engineering team.</li> <li>Ensures asset mechanical engineering risks (both static and rotating) are understood, controlled, managed and reduced.</li> <li>Participates in a variety of asset and project risk assessments.</li> <li>Input into anomaly assessment and resolution plans.</li> <li>Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all safe operating limit excursions.</li> <li>Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.</li> <li>Provides mechanical support to technical management of change (MoCs) and engineering queries.</li> <li>Acts as technical interface with projects and modifications organisation, including development of statement of requirements (SOR), project initiation requests (PIRs), and decision support packages (DSP).</li> <li>Supports delivery of production efficiency improvement and defect elimination processes (including simple investigations for deferrals and vulnerabilities).</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity (IPC).</li> <li>Performs follow-up actions and observations from self-verification checks that are related to mechanical engineering.</li> <li>Participates in start up readiness and assurance reviews.</li> <li>Provides coaching to junior engineers.</li> </ul> <h4>Experience, Qualifications & Key Skills</h4> <ul> <li>Above 10 years experience in oil and gas industry (preferably with international oil companies direct or contract).</li> <li>Professional (chartered) engineer preferred.</li> <li>Technical degree in mechanical engineering or allied engineering subject.</li> <li>Experience in previous asset engineering or operations support engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – office suite, document management, applications for computerized maintenance management systems (CMMS) and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behavior change management.</li> </ul> <h4>Preferred Qualifications:</h4> <p>Certified professional engineer.</p> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p><h4>Job description</h4> <p><strong>Position:</strong> Lead process engineer<br> <strong>Company:</strong> KBR<br> <strong>Project:</strong> Majnoon<br> <strong>Location:</strong> Basra. 28/28 rotation</p> <p>Belong, connect, grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The lead process engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (conceptual studies, front-end design (FEED), and detailed engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p> <h4>Job responsibilities</h4> <ul> <li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of process flow schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li> <li>Own the detailed process engineering deliverables across all design phases, including process flow diagrams, piping & instrumentation diagrams, equipment datasheets, study reports/manuals, etc., ensuring alignment with international standards and project requirements.</li> <li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, hazard analysis reviews, and audits; ensure timely issue resolution and closure.</li> <li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li> <li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li> <li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li> <li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li> <li>Lead the technical supervision of FEED and detailed engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li> <li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li> <li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li> </ul> <h4>Functional responsibilities</h4> <ul> <li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li> <li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li> <li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li> <li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li> <li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li> <li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li> </ul> <h4>Technical skills</h4> <ul> <li>Extensive experience in FEED and detailed engineering design for offshore/onshore greenfield/brownfield projects.</li> <li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li> <li>Strong knowledge of process safety management and hazard analysis techniques.</li> <li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li> <li>Experience with process control systems and instrumentation.</li> </ul> <h4>Soft skills</h4> <ul> <li>Leadership and team management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work collaboratively in a multidisciplinary environment.</li> <li>Problem-solving mindset with a focus on innovation and efficiency.</li> <li>Adaptability to changing project requirements and priorities.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Mandatory:</strong> Bachelor’s degree in engineering (chemical, process, or related field).</li> <li><strong>Preferred:</strong> Master’s degree in engineering (chemical, process, or related field) and/or membership of internationally accepted applicable professional institute.</li> <li>10 years of experience in process engineering within engineering contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li> </ul> <h4>Work environment</h4> <p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p></p><p></p>