وظائف مهندسين سلامة وصحة مهنية في العراق

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring a Quality CSA Lead Engineer for major Oil &amp; Gas / Industrial EPC projects. If you have deep expertise in Civil, Structural, and Architectural (CSA) QA/QC and a strong background enforcing Total Energies standards , we want to hear from you. Key Responsibilities QA/QC Management: Establish and maintain the CSA Quality Management System in line with Total Energies specifications, PQPs, and international codes (ACI, ASTM, AISC, AWS, Eurocodes). Inspection &amp; Control: Lead inspections for earthworks, concrete pour cards, structural steel fabrication/erection, welding, grouting, and architectural finishes. TPIA Coordination: Manage Hold, Witness, and Surveillance points with Third-Party Inspection Agencies and laboratories. NCR Management: Drive root cause analysis (RCA), raise/close Non-Conformance Reports, and manage punch lists to client satisfaction. Team Leadership: Mentor field QA/QC teams and represent the quality department during client and Total Energies audits.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Preferred candidate profile</b></p><ul><li>Education: Bachelors Degree in Civil Engineering.</li><li>Experience: 1215 years in CSA QA/QC within Oil &amp; Gas or Industrial EPC environments.</li><li>Leadership: Minimum 5 years of experience in a Lead or Senior QA/QC capacity.</li><li>Certification: Certified ISO 9001:2015 Lead Auditor. Certified QA/QC Engineer (CSWIP, BSI, or equivalent preferred)</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Minimum 5 years of experience as an Electrical Site Engineer on construction, industrial plant, or high-rise building projects. Strong experience in electrical systems, site execution, and installation works. Holder of a valid Senior Authorised Person (SAP) certification. Good command of English (written and spoken). Hands-on experience with LV/MV systems, cabling, panel installation, testing, and commissioning. Strong teamwork, communication, and coordination skills.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Electrical Engineering or Electrical &amp; Electronics Engineering. Minimum 5 years of experience as an Electrical Site Engineer on construction, industrial plant, or high-rise building projects. Strong experience in electrical systems, site execution, and installation works. Holder of a valid Senior Authorised Person (SAP) certification. Good command of English (written and spoken. Overseas project experience is preferred. Hands-on experience with LV/MV systems, cabling, panel installation, testing, and commissioning. Strong teamwork, communication, and coordination skills.</p><p></p></section>

<p>We are seeking a Senior Site Electrical Engineer to join our team for an ongoing project in Iraq.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Electrical Engineering with a minimum of 5 years of relevant site experience. Good experience in electrical installation, execution, testing and commissioning, including LV systems, lighting, power and electrical infrastructure. Good experience in Low Current / ELV systems, including Fire Alarm, CCTV, Access Control, Data and other related systems. Ability to review drawings, coordinate with other disciplines, resolve site technical issues, supervise subcontractors, and monitor progress, quality and compliance with project specifications. Good coordination skills with consultants, contractors, suppliers and project teams. Previous experience in 4- or 5-star hotel projects is highly preferred. Experience with Guest Room Management Systems (GRMS) and hotel-related ELV systems is considered an advantage.</p>

<p>Performing inspections on particular disciplines and recording its results on the forms as per ITP established Updating inspection status by using systematic tools such as inspection matrix Preparing the inspection records to be reflected on MC Doc. Performing surveillance that tests are conducted as per international codes and standards Min. 5 years experience (Inspection Specialty : 3 years experience, Contract Scope of Work : 2 years experience) Approval Certification from ARAMCO</p><p><strong>Desired Candidate Profile</strong></p><p>Performing inspections on particular disciplines and recording its results on the forms as per ITP established Updating inspection status by using systematic tools such as inspection matrix Preparing the inspection records to be reflected on MC Doc. Performing surveillance that tests are conducted as per international codes and standards Min. 5 years experience (Inspection Specialty : 3 years experience, Contract Scope of Work : 2 years experience) Approval Certification from ARAMCO</p>

<p>The Project Planning & Cost Engineer is responsible for developing, implementing, and maintaining project planning, scheduling, budgeting, and cost control systems for oil and gas projects. The role includes preparing project schedules and cost forecasts, monitoring project performance, analyzing cost variances, reviewing contractor invoices and change orders, preparing management reports, supporting risk assessments, and coordinating with engineering, procurement, construction, and project management teams to ensure projects are delivered safely, on time, and within budget.</p><p>Bachelor's degree in Engineering, Project Management, Construction Management, Finance, or a related discipline. Minimum of 5 years of experience in project planning and cost engineering within the Oil & Gas, Energy, EPC, Construction, or Industrial sectors. Strong knowledge of project scheduling, budgeting, forecasting, earned value management, and cost control. Proficient in Primavera P6, Microsoft Project, SAP, Oracle, or equivalent project management software. Excellent analytical, reporting, communication, and problem-solving skills. Professional certifications such as PMP, CCP, PSP, or AACE are highly desirable.</p>

<p>The Project Planning & Cost Engineer is responsible for developing, implementing, and maintaining project planning, scheduling, budgeting, and cost control systems for oil and gas projects. The role includes preparing project schedules and cost forecasts, monitoring project performance, analyzing cost variances, reviewing contractor invoices and change orders, preparing management reports, supporting risk assessments, and coordinating with engineering, procurement, construction, and project management teams to ensure projects are delivered safely, on time, and within budget.</p><p>Bachelor's degree in Engineering, Project Management, Construction Management, Finance, or a related discipline. Minimum of 5 years of experience in project planning and cost engineering within the Oil & Gas, Energy, EPC, Construction, or Industrial sectors. Strong knowledge of project scheduling, budgeting, forecasting, earned value management, and cost control. Proficient in Primavera P6, Microsoft Project, SAP, Oracle, or equivalent project management software. Excellent analytical, reporting, communication, and problem-solving skills. Professional certifications such as PMP, CCP, PSP, or AACE are highly desirable.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;<strong>Launch Your Career as a Field Engineer with Weatherford</strong></p><br> <p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs.&nbsp;</p><br> <p>This is more than just a job — it’s an adventure. You’ll be working in the field, often at remote rig sites, where you’ll gain unmatched experience and responsibility from day one. Whether it’s assembling equipment, analysing data, or solving problems on the fly, you’ll be at the heart of operations that matter.&nbsp;</p><br> <p><strong>Your Development Journey</strong>&nbsp;</p><br> <p>You’ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience:&nbsp;</p><br> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients</li> </ul> <p><strong>Your day-to-day could include:&nbsp;</strong></p><br> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives</li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs</li> <li>Analyse performance data and recommend improvements&nbsp;</li> <li>Manage&nbsp;equipment logistics and ensure seamless setup and operation at the rig site</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently</li> </ul> <p><strong>What We’re Looking For</strong>&nbsp;</p><br> <ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months</li> <li>No more than 1 year of experience</li> <li>English language fluent proficiency (written and spoken)</li> <li>Strong communication and interpersonal skills</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li> <li>A passion for hands-on work and learning in dynamic environments&nbsp;(onshore and offshore)</li> </ul> <p><strong>What to Expect</strong>&nbsp;</p><br> <p>This role is physically and mentally demanding. You’ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you’re up for the challenge, the rewards are big.&nbsp;</p><br> <p>You’ll join one of our specialized product lines, such as:&nbsp;</p><br> <ul> <li>Completions&nbsp;</li> <li>Drilling Services&nbsp;</li> <li>Wireline Services&nbsp;</li> <li>Artificial Lift&nbsp;</li> <li>Well Services&nbsp;</li> <li>Managed Pressure Drilling…and many more&nbsp;</li> </ul> <p>&nbsp;<strong>Why Join Us?</strong>&nbsp;</p><br> <ul> <li>Fast-track your career with structured development and mentorship&nbsp;</li> <li>Work with cutting-edge technology in real-world settings&nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services&nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more&nbsp;</li> </ul> <p>Ready to engineer your future? Apply now and start your journey with Weatherford</p><br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible of RNCs, BSCs, transport (IP &amp; Microwave), CME/power maintenance in addition to Operation &amp; maintenance for all sites in area which including all bands 2G,3G &amp; LTE.</p><p>1-Site configuration of parameters to follow RF requests, modify TR equipment s, and work on NET echo</p><p>2-Field troubleshooting &amp; fix problem for both TR Microwave, RAN and CME/Power.</p><p>3-Support to the other department upon requests.</p><p>4-Daily Check all BTS &amp; MW, CME clearance alarm, close TKT &amp; resolving and following up all pending issues.</p><p>5-Acceptance and on-air new sites or expansions.</p><p>6-Daily task O&amp;M follow up.</p><p>7- follow up CME maintenance subcontractor</p><p>8-Team work &amp; CR implementations.</p><p>9-Network performances &amp; KPI with outage follow up.</p><p>10-Daily report to Cluster Supervisor.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>B.sc degree (Telecommunication Engineering or Electrical Engineering or equivalent degree).</b><br><b>3-5 years experience</b><br><b>Having a valid Engineer's union ID Card</b><br><br><b>Behavioral Competencies:</b><br></p><ul><li>Delivering Results &amp; Fostering Ownership</li><li>Building Customer Value</li><li>Networking &amp; Influencing Collaboratively</li><li>Leading Teams</li><li>Driving Change</li></ul><br><b>Technical Competencies:</b><br><ul><li>Access Network Operations</li><li>Network Monitoring</li><li>Problem Solving</li><li>Service Operations Center (SOC)</li><li>Technical Writing and Reporting</li><li>Troubleshooting &amp; Technical Problem Solving</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Conduct thorough testing of software applications (web and mobile) to ensure compliance with quality standards, Record test results. Develop and execute comprehensive test plans, test cases, and test scripts to validate functionality, performance, and usability. Identify, document, and report software defects; collaborate with developers to ensure timely resolution. Perform regression testing to confirm that resolved issues remain fixed in subsequent releases. Provide constructive feedback to improve overall software quality and user experience. Collaborate with cross-functional teams (development, system administration, product management) to resolve technical challenges during the software development lifecycle. Manage and prioritize incidents requiring specialized technical expertise based on business impact and severity</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor s degree in computer science, Engineering, or related field, or equivalent work experience. Minimum 1 year of experience in software quality assurance and testing methodologies. Proven experience with web and mobile application testing. Familiarity with Agile development methodologies and tools (e.g., Jira, Scrum) is a plus. Good understanding of software QA methodologies, tools, and processes. For example manual testing, automated testing. Experience with test automation frameworks and scripting languages (e.g., Python, Shell) is a plus. Proficiency in troubleshooting and diagnosing technical issues</p><p></p></section>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This position is to assist in administration duties to the HSSE Manager and Field HSE Manager regarding record keeping, finances, timekeeping, contractual obligations, HR requirements, material, stores and equipment administration.</p> <h4>Duties and responsibilities</h4> <ul> <li>Assistance in financial record keeping for the HSE department.</li> <li>Facilitate and record keeping of all BOC correspondence letters and reports.</li> <li>Creating and upkeep of HSE tools, equipment and PPE issuing databases.</li> <li>Creating and upkeep of equipment orders databases.</li> <li>Assistance in time sheet collections and submissions.</li> <li>Record keeping of all contractual meeting agreements and minutes.</li> <li>Creating and upkeep of HR employee requirement.</li> <li>Control and coordination of HSE team calendars and rosters.</li> <li>Record keeping of all HSE team accommodation requirements and accommodation lists.</li> <li>Upkeep of the HSE incentive gifts inventory and issuing lists.</li> <li>Record keeping and booking of visa application and expiry dates and flight departure dates.</li> <li>Facilitate and record keeping of all service desk, IT and other departmental requests.</li> <li>Any other tasks related to HSE in general.</li> </ul> <h4>Qualification & training requirements</h4> <p>Diploma / Degree in business management administration or equivalent.<br> Working knowledge of HSE related activities.</p> <h4>Experience</h4> <p>1 years’ experience in procurements, logistics, finance and administration.</p> <h4>Language proficiency, computer and software skills</h4> <p>MS Office: Proficient at an advanced level.<br> English – upper intermediate (verbal & written).</p> <h4>Skills</h4> <ul> <li>Strong communication and presentation skills.</li> <li>Good knowledge of Office applications.</li> <li>Oil and gas and HSE experience is preferable.</li> <li>Good team working skills.</li> <li>Ability to focus on continuous self-learning and improvement.</li> <li>Ability to work cohesively and communicate successfully in multi-cultural teams whilst being aware of and sensitive to cultural differences.</li> <li>Ability to communicate, co-ordinate, and manage cost data flow interfaces with each function.</li> <li>Skilled preparing meaningful accurate reports, in clear and concise English, utilizing information and data received from third parties, SAP (or equivalent system) and own analyses.</li> </ul></p><p></p>