وظائف موظف حجز تذاكر طيران

<p>The post holder is responsible for the delivery of Aviation security training programs through courses and workshops, ensuring that all aviation security staff are well-trained and capable of performing their duties efficiently and safely. Additionally, ensuring that other airport workers and stakeholders receive requisite security training and briefings in accordance with mandated international security standards. All training must be compliant with the Regulatory requirements of ICAO Document 8973 Aviation Security and the ICAA National Civil Aviation Security Training Program (NCASTP). A solid knowledge of performance management tools, techniques, and utilizing ‘state of the art’ technology, is vital, along with the ability to forge relationships with peers and customers. Key Areas of Responsibility: a) Regulatory requirements: Demonstrate excellent knowledge of all pertinent security regulations and standard operating procedures, the training requirements of the ICAO Document 8973 Security Manual and the ICAA National Civil Aviation Security Training Program (NCASTP). b) Lesson Plans & Courses: Assist in the development, and then deliver comprehensive aviation security training programs, including lesson plans, exercises and instructional materials for all identified training courses – specifically the core regulated security courses for a Certified Security Officer (CSO), the supervisory and specialist courses for the experienced staff, and for all airport staff the General Security Awareness Training (GSAT) and customer service courses. Create and conduct training sessions on aviation security protocols, procedures, and regulations. c) Courses, Development & Delivery Security Oversight: Organize and prepare all courses to international standards, quality checked against stated learning objectives, then delivered in the national language of Iraq or, when require, in English. (Ensure all courses, lesson plans, examinations and power point presentations are written in Arabic and English). d) Instructional Design: Apply instructional design methodologies to improve training effectiveness and job performance. e) Examinations: Ensure that all courses and examinations are delivered to the standard, content and required level of knowledge; that examination results are properly evaluated & appropriate remedial action initiated where necessary. f) Course Certification: Issue course certificates to successful candidates after course completion. g) Maintaining Records: Maintain accurate records of all training activities, certifications, and employee progress and ensure that staff and training records are properly filed and secured in accordance with Training Manual procedures. h) Methods: Deploy a wide variety of interactive and hands-on training methods, such as simulations and role playing, using visual exercises, varying incident scenarios, and tabletop exercises, to make learning more engaging & practical. i) Workshops: Assist in organizing AvSec workshops and seminars to meet the practical aspects of training needs and staff development. j) Mentorship & On-the-Job training: Provide on-the-job training and mentorship to new staff, offering feedback and addressing areas of low performance. k) Assess and evaluate trainees: Monitor and assess the progress of trainees, providing feedback and guidance to ensure they meet the required standards. l) Maintain training materials: Update and maintain training materials to ensure they are current and effective. m) Currency: Keep current with the latest developments, training trends and industry best practices in airport operations, security regulations, and training methodologies to ensure that the training syllabuses are current and effective. n) Collaborate with stakeholders: Work with the Head of Security Training (HoSTNG) to ensure that training programs and courses meet organizational needs.</p><p>Education: ICAO AvSec Instructor or equivalent, Aviation Security Supervisor, Managing Safely (IOSH) or equivalent, Diploma or equivalent Experience: Minimum of 2 years in an aviation training instructor role with domestic and/or international experience. experience of operating in post conflict & low infrastructure multicultural environments. Minimum of 5 years working within an airport and/or airline environment, at least 2 of those years as an AvSec Supervisor. Computer Skills: Knowledgeable in Microsoft Office suite (user´s perspective) and able to manage other specific project / management software, provided the adequate training. Language Skills (Eng., Arabic, other): Solid knowledge and command of written and spoken English (essential) and Arabic (essential). Training Requirements: Ability to deliver training in Aviation & Protective Security in benign & post conflict environments. Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Designing & executing Training Development syllabuses • Security screening procedures and techniques • Adult education and vocational training principles • Interpersonal & Instructor Skills • Knowledge of Regulations & Policies in the Aviation Field • Aviation Security Technology and Systems</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities The F-16 Engine Mechanic is responsible for   Oversight/Training/Instructing  the host nation on the inspection, maintenance, and repair of F-16 aircraft engines, with a strong focus on ensuring the engine’s optimal performance, reliability, and safety. This role requires in-depth knowledge of turbine engines, especially Pratt &amp; Whitney or General Electric engines commonly used in F-16 aircraft . Working in close collaboration with other maintenance team members, the technician  oversees  both routine and complex tasks, diagnosing issues and implementing repairs that meet strict military and safety standards. Attention to detail, adherence to technical manuals, and commitment to quality assurance are critical to success in this role. Essential Duties and Responsibilities for Oversight/Training/Instructing host nation in the following: • Routine and non-routine inspections of F-16 aircraft engines, identifying issues or areas requiring attention. • Scheduled maintenance, including troubleshooting, removing, and installing engine components. • Utilizing advanced diagnostic equipment to assess engine conditions and analyze engine performance. • Repairing and replacing worn or damaged components, such as turbine blades, bearings, and seals, ensuring compliance with technical specifications. • Maintaining detailed records of work performed, including inspection and maintenance logs, and report findings to ensure accurate documentation. • Adhering to all safety protocols and technical manuals during maintenance procedures to ensure personnel safety and equipment functionality. • Collaborating with other technicians and engineers to discuss solutions for complex mechanical or technical issues. • Staying up-to-date on F-16 engine technologies, tools, and best practices by participating in ongoing training and professional development. • Supporting pre- and post-flight engine checks, ensuring engine readiness and addressing last-minute maintenance needs. Work Conditions Position is located OCONUS and in an austere environment; work is being performed on the flight line, limited hangar or aviation field environment. Physical Requirements • Must be able to lift and parts, tooling and other awkward items sometimes weighing greater than 50 lbs , including up and down stairs. • Requires intermittent standing, walking, sitting, squatting, stretching, and bending throughout the workday. • Must be able to see and hear, or use prosthetics that will enable these senses to function adequately to assure that the requirements of this position can be fully met. Qualifications Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required . • Must be able to obtain and maintain a US Secret security clearance. • In order to obtain a secret clearance, qualified candidates must have US Citizenship. • Ability to pass physical screening requirements. Education and/or Experience: • High school diploma or equivalent; an Associate’s or technical degree in aircraft maintenance or a related field is preferred. • Minimum of 8-10 years of experience working with military turbine engines, ideally on F-16 engines. • Extensive hands-on experience with Pratt &amp; Whitney or General Electric engines for the F-16 aircraft . • Proficiency in using diagnostic tools, maintenance software, and technical manuals for turbine engines. • Ability to work in a fast-paced environment, meet deadlines, and adapt to changing priorities. • Strong understanding of safety standards and procedures for working with military aircraft . • Certification through a relevant military or civilian aviation authority (e.g., FAA, A&amp;P) is highly desirable. • USAF 7 – Level skill or equivalent. What We Bring + + At V2X, we strive to be market competitive in our total reward offerings. + The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. + Please speak with a recruiter for additional information. + Employee benefits include the following: + Healthcare coverage + Retirement plan + Life insurance, AD&amp;D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients</p> </div>

<p><h4>Aircraft mechanic III - crew chief</h4> <p>Amentum is seeking an aircraft mechanic III - crew chief to provide aircraft maintenance support, management, and leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgment in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts – both short term and long term. This person shall have working experience in all aspects of flightline, phase maintenance, and aircrew life support systems.</p> <h4>Knowledge & skills</h4> <ul> <li>Experience providing on-the-job training (OJT) to technicians.</li> <li>Interface with operational customers to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, document inventory usage, and control workflow.</li> <li>Work with other A&P mechanics and technical representatives to troubleshoot, diagnose, and solve unusual and complex maintenance problems.</li> <li>Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneumatic/hydraulic, fuel, electrical/electronic systems, and problems.</li> <li>Plan and schedule aircraft utilization and maintenance activity and coordinate performance with operational customers.</li> <li>Assist in maintaining accurate parts inventory.</li> <li>Supervise aircraft jacking, lifting, and towing operations.</li> <li>Supervise aircraft and component inspections.</li> <li>Interpret inspection findings and determine adequacy of corrective actions.</li> <li>Troubleshoot aircraft structures, systems, components, and related equipment.</li> <li>Review maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li> <li>Ability to inspect and operate powered and nonpowered aerospace ground equipment.</li> <li>Perform quality verification inspections (QVI) as needed.</li> <li>Perform other qualified duties as assigned.</li> </ul> <h4>Experience & education</h4> <ul> <li>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&P).</li> <li>Minimum of ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar fixed-wing aircraft is required.</li> <li>Must have aircraft maintenance experience.</li> <li>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</li> <li>Demonstrated leadership ability combined with attention to detail.</li> <li>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</li> <li>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneumatic/hydraulic; and mechanical principles.</li> <li>Knowledge of sheet metal, properties of materials, fuels, and oils.</li> <li>Ability to read, interpret, and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables, and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must have a working knowledge of aircraft safety requirements.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> </ul></p><p></p>

<p><h4>Essential responsibilities (but not limited to):</h4> <p>Perform launch, recovery, scheduled and unscheduled inspections/maintenance.<br> Preflight/thru flight/BPO inspections, ground handling, minor maintenance, and servicing.<br> Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance.<br> Services aircraft. Performs end-of-runway, post-flight, preflight, thru-flight, and phase inspections.<br> Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.<br> Performs inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures.<br> Services, operates, and maintains ground support equipment and performs interior and exterior cleaning of aircraft and work areas. Must precisely complete all maintenance documentation.<br> Perform all other position related duties as assigned or requested.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Must have a current FAA Airframe and Powerplant (A&P) license in good standing.</li> <li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li> <li>Experience with OBOGS systems and T-6 life support required.</li> <li>2.5 years Textron T6 Texan II aircraft maintenance experience within the last 5 years required.</li> <li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li> <li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Possess a current state issued driver’s license.</li> <li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization. Note: U.S. citizenship is required for facility credentials/authorization at this work site.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <ul> <li>Must possess the ability to carry and lift overhead up to 50 pounds.</li> <li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li> <li>Must be able to work at high altitudes when performing flight attendant duties.</li> <li>Work is primarily performed outside in a high-level noise environment.</li> <li>Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</li> </ul></p><p></p>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p>Knowledge &amp; Skills Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Key Responsibilities: + Train, advise, and assist IqAF personnel in operational scheduling, training management, and aircrew flight coordination procedures. + P lan and schedule F-16 aircrew flight training and aircraft sorties; manage simulator scheduling and daily flying schedules. + Provide oversight and technical assistance in managing flight data, tracking training qualifications, and updating operational reports. + Guide the use and interpretation of technical publications and scheduling tools (e.g., ARMS, ILIAS, and PEX). + Maintain and document accurate training records, flying hours, and operational logs; validate aircrew qualifications and unit flying hour programs. + Coordinate with aircraft maintenance, base operations, and SOF for up-to-date flight status, airfield operations, and mission requirements. + Perform additional operational tasks and support duties as directed by Site Management. Material &amp; Equipment Directly Used: Flight scheduling tools (ARMS, PEX, ILIAS), mission planning systems, UHF/VHF radios, classified tracking systems, Microsoft Office Suite, technical orders, and aircrew readiness documentation systems. Working Environment: Deployed operational environment in Iraq with exposure to office and flight line operations. Routine interaction with U.S. and foreign military personnel. High emphasis on flight safety, operational security, and cross-cultural team integration. Physical Activities: Frequent walking, standing, and coordination across operations and maintenance areas. Occasional lifting of documentation or scheduling systems tools. Worldwide travel, including deployment to the Middle East, required . Qualifications + Education: High school diploma or equivalent required . + Experience: 10+ years in aircrew operations, scheduling, and flight resource management (F-16 preferred). Direct experience working with IqAF and CLS program highly desirable. + Certifications: USAF Aviation Resource Management and/or SARM/HARM training preferred. + Other Requirements: U.S. Citizenship required; Secret clearance or interim acceptable; strong interpersonal, training, and communication skills; operational flexibility and readiness to support mission-critical tasks in deployed environments. What We Bring: + At V2X, we strive to be market competitive in our total reward offerings. + The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. + Please speak with a recruiter for additional information. + Employee benefits include the following: + Healthcare coverage + Retirement plan + Life insurance, AD&amp;D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences</p> </div>

<p><h4>Essential responsibilities:</h4> <p>Remove/install canopies, ejection seats.<br> Perform periodic maintenance of all cockpit egress and life support systems of moderate difficulty, such as seats, canopies, CADs, heating/cooling systems.<br> Inspect and operate powered and nonpowered aerospace ground equipment.<br> Review maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.<br> Maintain aircraft support equipment and orderly workspace.<br> Interpret maintenance instruction manuals, maintenance requirement cards, work from related schematics, diagrams, drawings, technical directives, maintenance/servicing instructions and operational written procedures and company directives to perform maintenance.<br> Install and remove cartridge actuated devices.<br> Perform inspections and maintenance of aircraft air conditioning systems, fire warning/extinguishing systems.<br> Identify and treat corrosion.<br> Operate, maintain, troubleshoot, remove and replace associated parts and components on a variety of systems, such as aircraft, cabin environmental and pressurization systems, equipment cooling, liquid/gaseous and OBOGS oxygen systems.<br> Perform related duties in hazardous areas such as oxygen system, engine fire extinguishing systems including the removal and replacement of cartridge-actuated devices.<br> Maintain foreign object damage (FOD), hazardous waste, and tool control programs.<br> Adhere to all applicable Amentum policies and procedures.<br> Perform all other position related duties as assigned or requested.</p> <h4>Minimum qualifications:</h4> <ul> <li>High school graduate or equivalent.</li> <li>Must have completed Egress Course.</li> <li>Must have an FAA Airframe and Powerplant (A&P) License.</li> <li>Shall have completed and be able to document the appropriate T/M required/series preferred Navy Egress class.</li> <li>Must have five (5) years of applicable aircraft maintenance support experience.</li> <li>Three (3) or more years of T6 aircraft experience.</li> <li>Must have experience and thorough working knowledge in corrosion detection, treatment, and prevention.</li> <li>Shall be qualified according to their field of expertise and the level of maintenance assigned.</li> <li>Must be a U.S. citizen.</li> <li>Possess a high degree of expertise of aircraft systems.</li> <li>Demonstrates in-depth knowledge of applicable maintenance/technical manuals, publications, instructions and special tools and test equipment.</li> <li>Must be familiar with operational capabilities and limitations of aircraft systems.</li> <li>Must be customer oriented.</li> </ul></p><p></p>