وظائف مطورى واجهة مستخدم - البصره العراق

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>Preface</h4> <p>This document outlines the job specification for the IT Support Lead role. The role is junior to the IT Support Manager and is responsible for leading front-line IT support activities within a site-based oil & gas operational environment, ensuring reliable day-to-day IT services and effective user support.</p> <h4>Professional summary</h4> <p>The IT Support Lead typically has 3–5 years of experience in IT operations or service support, preferably within oil & gas or industrial environments. The role focuses on coordinating daily IT support activities, supervising technicians, resolving incidents, and acting as the primary escalation point to the IT Support Manager.</p> <h4>Core competencies</h4> <ul> <li>IT service desk & end-user support</li> <li>Incident, request & problem coordination</li> <li>Basic network & systems support</li> <li>IT security awareness & compliance</li> <li>Vendor & contractor coordination</li> <li>Asset & access management</li> <li>ITIL-based service operations</li> </ul> <h4>Key responsibilities</h4> <ul> <li>Coordinate day-to-day IT support activities for site users.</li> <li>Provide hands-on support for desktops, laptops, peripherals, and standard applications.</li> <li>Log, track, and resolve incidents and service requests in line with SLAs.</li> <li>Escalate complex or high-impact issues to the IT Support Manager as required.</li> <li>Support basic server, network, and application troubleshooting activities.</li> <li>Ensure compliance with IT security, access control, and acceptable use policies.</li> <li>Coordinate with vendors and third-party support teams for issue resolution.</li> <li>Maintain accurate IT asset, access, and support documentation.</li> <li>Support IT onboarding, inductions, and user awareness activities.</li> </ul> <h4>Technical skills</h4> <ul> <li>Windows desktop and basic server administration</li> <li>Microsoft 365 (Outlook, Teams, OneDrive, SharePoint)</li> <li>Basic networking concepts (LAN, Wi-Fi, VPN)</li> <li>Endpoint security and antivirus tools</li> <li>ITSM / service desk tools</li> </ul> <h4>Certifications</h4> <ul> <li>ITIL Foundation (preferred)</li> <li>Microsoft or equivalent technical certifications (desirable)</li> <li>Relevant site HSE or safety certifications</li> </ul> <h4>Key performance indicators (KPIs)</h4> <ul> <li>Incident and request resolution within agreed SLA targets.</li> <li>User satisfaction with IT support services.</li> <li>Accuracy and completeness of IT asset and access records.</li> <li>Compliance with IT security and site policies.</li> </ul> <h4>Reporting structure</h4> <p>Reports directly to the IT Support Manager and works closely with IT Infrastructure, Applications, IM, and Cyber Security teams to support site operations.</p></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description</h4> <h4>Delivery coordinator</h4> <p>28/28 Basra</p> <h4>Overview</h4> <p>The Delivery Coordinator will serve as the primary integrator between the construction and commissioning teams across multiple projects, ensuring smooth and efficient coordination of all interfaces. These projects include, but are not limited to, tie-ins, power projects, oil and gas projects and facilities. The role involves close collaboration with the client's project and operations team to ensure project alignment, successful completion and handover.</p> <h4>Key responsibilities</h4> <ol> <li><strong>Construction & mechanical completion</strong><br> Act as the liaison between the construction and commissioning teams to ensure a seamless transition from mechanical completion to commissioning.<br> Oversee and track the mechanical completion status and ensure all relevant documentation is provided to the commissioning team.<br> Facilitate the timely handover of systems from construction to commissioning, ensuring all pre-commissioning activities are completed as per the agreed schedule.<br> Coordinate construction punch lists and ensure resolution before the systems are handed over for commissioning.<br> Support in resolving construction-related issues that impact commissioning, ensuring these are addressed proactively.</li> <li><strong>Interface management</strong><br> Manage interfaces across various projects, including tie-ins, power projects, and oil and gas operations, ensuring integration and alignment between different teams and systems.<br> Facilitate communication and coordination between the construction, commissioning, and interface teams to ensure all critical paths are tracked and managed effectively.<br> Ensure that all interface-related activities (tie-ins, utilities, etc.) are communicated and planned in coordination with the client's project and operations team.<br> Maintain a comprehensive interface register to track and manage all critical points of interaction between construction and commissioning teams.</li> <li><strong>Commissioning support</strong><br> Work closely with the commissioning team to support requirements for pre-commissioning and commissioning activities in line with schedule.<br> Monitor the readiness of sub-systems, systems and equipment for commissioning, ensuring any potential bottlenecks are communicated and addressed promptly.<br> Ensure that commissioning requirements remain a focus during construction phases in line with schedule requirements to avoid delays or rework during the pre-commissioning and commissioning stages.<br> Support and facilitate start-up readiness and assurance including pre-start-up audits and checks (i.e. TIV, PSSR, SUOP, PSUA, SOF, VCR) where applicable.<br> Support and facilitate communication and coordination with commissioning and operational readiness to ensure a smooth transition through commissioning, ready for start-up (RFSU), start-up and handover; ensuring a collaborated approach with client's project and operations teams.</li> <li><strong>Reporting & communication</strong><br> Provide regular reports on the progress of mechanical completion, interface coordination, and commissioning readiness to both internal teams and external stakeholders.<br> Ensure all stakeholders are updated on any changes in schedules, priorities, or issues impacting construction and commissioning timelines.<br> Develop and maintain strong relationships with company’s project and operations teams to promote a collaborated environment for progress and inclusive problem-solving.</li> <li><strong>Construction risk management</strong><br> Update the construction risk register on a weekly basis or whenever required.<br> Identify potential risks and bottlenecks at the construction-commissioning interface and work with relevant teams to mitigate these risks.<br> Ensure that interface-related issues are escalated and resolved in a timely manner to avoid delays in project completion.</li> </ol> <h4>Key interfaces</h4> <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Contractors and subcontractors</li> <li>Clients project and operations teams (BOC & AOS)</li> </ul> <h4>Skills & qualifications</h4> <ul> <li>Strong background in EPCM projects, particularly in oil and gas.</li> <li>Extensive experience in construction and commissioning (12+ years), with an understanding of mechanical completion processes and commissioning.</li> <li>Excellent communication and coordination skills to manage multiple stakeholders.</li> <li>Prior experience working in the Majnoon field and familiarity with the operator (Anton Oil) and client (BOC) is preferred.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description</h4> <h4>Delivery coordinator</h4> <p>28/28 Basra</p> <h4>Overview</h4> <p>The Delivery Coordinator will serve as the primary integrator between the construction and commissioning teams across multiple projects, ensuring smooth and efficient coordination of all interfaces. These projects include, but are not limited to, tie-ins, power projects, oil and gas projects and facilities. The role involves close collaboration with the client's project and operations team to ensure project alignment, successful completion and handover.</p> <h4>Key responsibilities</h4> <ol> <li><strong>Construction & mechanical completion</strong><br> Act as the liaison between the construction and commissioning teams to ensure a seamless transition from mechanical completion to commissioning.<br> Oversee and track the mechanical completion status and ensure all relevant documentation is provided to the commissioning team.<br> Facilitate the timely handover of systems from construction to commissioning, ensuring all pre-commissioning activities are completed as per the agreed schedule.<br> Coordinate construction punch lists and ensure resolution before the systems are handed over for commissioning.<br> Support in resolving construction-related issues that impact commissioning, ensuring these are addressed proactively.</li> <li><strong>Interface management</strong><br> Manage interfaces across various projects, including tie-ins, power projects, and oil and gas operations, ensuring integration and alignment between different teams and systems.<br> Facilitate communication and coordination between the construction, commissioning, and interface teams to ensure all critical paths are tracked and managed effectively.<br> Ensure that all interface-related activities (tie-ins, utilities, etc.) are communicated and planned in coordination with the client's project and operations team.<br> Maintain a comprehensive interface register to track and manage all critical points of interaction between construction and commissioning teams.</li> <li><strong>Commissioning support</strong><br> Work closely with the commissioning team to support requirements for pre-commissioning and commissioning activities in line with schedule.<br> Monitor the readiness of sub-systems, systems and equipment for commissioning, ensuring any potential bottlenecks are communicated and addressed promptly.<br> Ensure that commissioning requirements remain a focus during construction phases in line with schedule requirements to avoid delays or rework during the pre-commissioning and commissioning stages.<br> Support and facilitate start-up readiness and assurance including pre-start-up audits and checks (i.e. TIV, PSSR, SUOP, PSUA, SOF, VCR) where applicable.<br> Support and facilitate communication and coordination with commissioning and operational readiness to ensure a smooth transition through commissioning, ready for start-up (RFSU), start-up and handover; ensuring a collaborated approach with client's project and operations teams.</li> <li><strong>Reporting & communication</strong><br> Provide regular reports on the progress of mechanical completion, interface coordination, and commissioning readiness to both internal teams and external stakeholders.<br> Ensure all stakeholders are updated on any changes in schedules, priorities, or issues impacting construction and commissioning timelines.<br> Develop and maintain strong relationships with company’s project and operations teams to promote a collaborated environment for progress and inclusive problem-solving.</li> <li><strong>Construction risk management</strong><br> Update the construction risk register on a weekly basis or whenever required.<br> Identify potential risks and bottlenecks at the construction-commissioning interface and work with relevant teams to mitigate these risks.<br> Ensure that interface-related issues are escalated and resolved in a timely manner to avoid delays in project completion.</li> </ol> <h4>Key interfaces</h4> <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Contractors and subcontractors</li> <li>Clients project and operations teams (BOC & AOS)</li> </ul> <h4>Skills & qualifications</h4> <ul> <li>Strong background in EPCM projects, particularly in oil and gas.</li> <li>Extensive experience in construction and commissioning (12+ years), with an understanding of mechanical completion processes and commissioning.</li> <li>Excellent communication and coordination skills to manage multiple stakeholders.</li> <li>Prior experience working in the Majnoon field and familiarity with the operator (Anton Oil) and client (BOC) is preferred.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p><strong>Position:</strong> Lead process engineer<br> <strong>Company:</strong> KBR<br> <strong>Project:</strong> Majnoon<br> <strong>Location:</strong> Basra. 28/28 rotation</p> <p>Belong, connect, grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The lead process engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (conceptual studies, front-end design (FEED), and detailed engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p> <h4>Job responsibilities</h4> <ul> <li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of process flow schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li> <li>Own the detailed process engineering deliverables across all design phases, including process flow diagrams, piping & instrumentation diagrams, equipment datasheets, study reports/manuals, etc., ensuring alignment with international standards and project requirements.</li> <li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, hazard analysis reviews, and audits; ensure timely issue resolution and closure.</li> <li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li> <li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li> <li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li> <li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li> <li>Lead the technical supervision of FEED and detailed engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li> <li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li> <li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li> </ul> <h4>Functional responsibilities</h4> <ul> <li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li> <li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li> <li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li> <li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li> <li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li> <li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li> </ul> <h4>Technical skills</h4> <ul> <li>Extensive experience in FEED and detailed engineering design for offshore/onshore greenfield/brownfield projects.</li> <li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li> <li>Strong knowledge of process safety management and hazard analysis techniques.</li> <li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li> <li>Experience with process control systems and instrumentation.</li> </ul> <h4>Soft skills</h4> <ul> <li>Leadership and team management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work collaboratively in a multidisciplinary environment.</li> <li>Problem-solving mindset with a focus on innovation and efficiency.</li> <li>Adaptability to changing project requirements and priorities.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Mandatory:</strong> Bachelor’s degree in engineering (chemical, process, or related field).</li> <li><strong>Preferred:</strong> Master’s degree in engineering (chemical, process, or related field) and/or membership of internationally accepted applicable professional institute.</li> <li>10 years of experience in process engineering within engineering contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li> </ul> <h4>Work environment</h4> <p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p></p><p></p>

<p><h4>Job description</h4> <p>The lead mechanical & piping construction lead is responsible for directing, coordinating, and technically governing all field construction activities across mechanical and piping scopes within brownfield and greenfield project environments. The role provides senior level leadership, ensures disciplined execution, drives constructability integration, and supports strategic planning across multi-phase construction programs.</p> <p>This position acts as the primary technical lead for mechanical and piping construction, ensuring HSSE compliance, schedule adherence, cost efficiency, and quality compliance. The lead manages multi-discipline interfaces and ensures seamless integration between engineering, procurement, construction, and commissioning teams.</p> <h4>Accountabilities / expectations</h4> <ul> <li>Lead all mechanical and piping construction activities across multiple simultaneous work fronts, ensuring safe, efficient, and compliant execution.</li> <li>Provide technical direction, coaching, and performance oversight to construction teams and contractors.</li> <li>Manage daily/weekly construction planning, work-front readiness, and resource allocation.</li> <li>Ensure coordinated execution across civil, structural, electrical, instrumentation, and commissioning disciplines.</li> <li>Ensure mechanical and piping designs fully incorporate constructability principles, modularization, cold-work strategies, and HSSE risk reduction.</li> <li>Lead constructability reviews and provide authoritative input on installation methodologies, lifting studies, access planning, and brownfield tie-in strategies.</li> <li>Validate engineering deliverables for completeness, accuracy, and alignment with construction sequencing and systemization.</li> <li>Review and approve construction method statements, ITPs, JHAs, and technical procedures.</li> <li>Support development and implementation of construction execution plans, resource strategies, and work-front sequencing for all project phases.</li> <li>Ensure construction activities align with level 4 schedules, procurement milestones, fabrication readiness, and commissioning priorities.</li> <li>Identify productivity constraints, evaluate root causes, and implement corrective actions to improve field performance.</li> <li>Drive initiatives such as off-plot fabrication, pre-assembly, modular construction, and standardized installation practices.</li> <li>HSSE leadership by enforcing safe systems of work and ensuring compliance with KBR and client HSSE standards.</li> <li>Ensure mechanical and piping installations meet project specifications, industry codes (ASME, API, ISO), and quality requirements.</li> <li>Oversee inspection, testing, and commissioning readiness including hydrotesting, flushing, leak testing, and mechanical completion.</li> <li>Maintain strong communication with construction manager, engineering lead, procurement, QA/QC, and commissioning teams.</li> <li>Ensure timely resolution of technical queries, field design changes, and construction issues through structured interface management.</li> <li>Provide accurate reporting on progress, productivity, risks, and construction performance.</li> <li>Identify construction risks early, develop mitigation plans, and ensure proactive management of brownfield and greenfield constraints and SIMOPS.</li> <li>Promote continuous improvement through lessons learned, innovation in field execution, and adoption of best-practice methodologies.</li> </ul> <h4>Education</h4> <p>BSc. degree in mechanical engineering, piping engineering, or related discipline.</p> <h4>Experience requirements</h4> <p>10+ years experience in oil & gas mechanical/piping engineering and design.<br> 5-10 years experience leading construction activities in multidiscipline environments, including brownfield and live-plant conditions.</p> <p>Demonstrated experience in:</p> <ul> <li>Productivity measurement and resource-based planning</li> <li>Level 4 construction scheduling</li> <li>Mechanical completion, systemization, and commissioning interfaces</li> <li>Managing multiple contractors and simultaneous work fronts</li> </ul> <h4>Technical & leadership skills</h4> <ul> <li>Strong leadership and communication capabilities.</li> <li>Advanced understanding of constructability, modularization, and field execution methodologies.</li> <li>Proficiency in interpreting engineering drawings, isometrics, P&IDs, and 3D model reviews.</li> <li>Ability to lead complex brownfield and greenfield tie-ins, shutdown scopes, and SIMOPS environments.</li> <li>Strong problem solving skills with the ability to make technical decisions under pressure.</li> <li>High competency in HSSE risk management and safe construction practices.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Electronic PTW (ePTW) Administrator will be responsible for ensuring the smooth implementation of the ePTW system in areas where it has already been rolled out, as well as supporting its rollout in new areas and departments. The Electronic Permit to Work (ePTW) Administrator is responsible for managing, maintaining, and supporting the electronic Permit to Work system to ensure safe, compliant, and efficient control of work activities. The role includes system administration, user support, permit workflow monitoring, training coordination, reporting, and ensuring consistent adherence to these procedures throughout the organization.</p> <h4>Duties and responsibilities</h4> <ul> <li>Administer and maintain the ePTW system and associated databases.</li> <li>Create, modify, deactivate, and manage user accounts, roles, and permissions.</li> <li>Configure workflows, templates, and system settings in line with company procedures.</li> <li>Monitor system performance and coordinate with IT/software vendors for troubleshooting and upgrades.</li> <li>Ensure data integrity, system availability, and backup compliance.</li> <li>Support ePTW development and rollout in Majnoon Oilfield and ensure smooth transition from a paper-based to an electronic PTW system.</li> <li>Support permit issuers, receivers, and approvers in the proper use of the ePTW system.</li> <li>Monitor live permits and ensure permits are processed according to approved workflows.</li> <li>Assist in resolving permit conflicts, workflow issues, and system-related delays.</li> <li>Coordinate contingency plans during system outages, including implementation of paper-based permits when required.</li> <li>Ensure the ePTW process complies with company HSE standards and regulatory requirements.</li> <li>Support implementation of isolation management and simultaneous operations (SIMOPS) controls.</li> <li>Maintain records and audit trails for permits, approvals, and system activities.</li> <li>Participate in HSE audits, inspections, and incident investigations related to permit control.</li> <li>Conduct user training and awareness sessions for employees and contractors.</li> <li>Provide coaching and technical support to system users.</li> <li>Develop user guides, procedures, and training materials.</li> <li>Support competency assessments related to ePTW usage.</li> <li>Generate daily, weekly, and monthly permit reports and KPIs.</li> <li>Maintain documentation related to system configuration, procedures, and change management.</li> <li>Track system issues, corrective actions, and improvement initiatives.</li> <li>Prepare management reports regarding permit statistics and system performance.</li> <li>Identify opportunities to improve the ePTW process and workflow efficiency.</li> </ul> <h4>Qualification</h4> <p>Suitable tertiary qualification, preferably technical.</p> <h4>Experience</h4> <ul> <li>Experience in Permit to Work systems, HSE operations, or industrial site administration.</li> <li>Familiarity with electronic Permit to Work software and workflow systems.</li> <li>Good understanding of isolation management, risk assessment, and work authorization processes.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>English.</li> <li>Highly skilled in using Microsoft applications including Word, Excel, PowerPoint, and Outlook.</li> <li>Skill in software and database tools related to ePTW systems.</li> </ul> <h4>Key competencies</h4> <ul> <li>Ability to work in harsh environment.</li> <li>Culturally and ethically aware.</li> <li>Problem solving.</li> <li>Team coordination.</li> <li>Communication skills.</li> <li>Safety leadership.</li> <li>Analytical thinking.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <p>KBR is looking for a site mechanical supervisor to be based in Basra, Iraq – daily commute.</p> <h4>Main missions</h4> <ul> <li>Ensure safe, compliant, and high-quality execution of all mechanical construction, installation, testing, and pre-commissioning activities at site.</li> <li>Supervise EPC contractor and subcontractor mechanical works in accordance with approved drawings, project specifications, method statements, ITPs, applicable codes, vendor requirements, and company requirements.</li> <li>Coordinate mechanical activities with construction, engineering, QA/QC, HSE, commissioning, package vendors, and other disciplines to meet project schedule and system priorities.</li> <li>Identify technical, quality, safety, interface, and constructability issues, and drive their timely resolution and close-out.</li> <li>Support mechanical completion, preservation, pre-commissioning, commissioning, and handover of mechanical systems and equipment.</li> </ul> <h4>Key activities</h4> <strong>Site supervision and construction control</strong> <ul> <li>Supervise daily installation of rotating equipment, static equipment, packaged units, tanks, vessels, piping, pipeline, pumps, compressors, turbines, filters, heat exchangers, chemical dosing equipment, lifting equipment, and associated auxiliaries.</li> <li>Monitor equipment receipt, storage, preservation, handling, lifting, positioning, levelling, alignment, grouting, bolting, coupling, lubrication, and final installation.</li> <li>Verify equipment location, orientation, elevations, access, maintainability, foundations, anchor bolts, supports, and interfaces against approved AFC drawings and vendor documentation.</li> <li>Supervise associated piping interfaces, including nozzle connections, strain control, flange alignment, supports, valves, temporary strainers, cleanliness, and reinstatement.</li> <li>Ensure work fronts are properly planned and required drawings, materials, tools, lifting plans, access, permits, vendor support, and preceding works are available.</li> <li>Monitor preservation and protection of installed equipment until handover, including periodic rotation, desiccants, lubrication, weather protection, and preservation records as applicable.</li> </ul> <strong>Technical compliance and quality</strong> <ul> <li>Ensure execution complies with approved AFC drawings, specifications, equipment data sheets, vendor manuals, method statements, ITPs, and applicable international standards.</li> <li>Participate in inspection requests and witness required hold and witness points with QA/QC personnel and vendor representatives.</li> <li>Inspect equipment installation, alignment, levelling, soft-foot, grouting, bolting, lubrication, cleanliness, guards, supports, and general workmanship.</li> <li>Witness or review mechanical tests and checks, including hydrostatic and pneumatic tests where applicable, flushing, blowing, cleaning, leak tests, shaft alignment, rotation checks, vibration baseline checks, and functional testing.</li> <li>Review and follow up punch items, site observations, non-conformities, concessions, and corrective actions until closure.</li> <li>Assist in checking red-line mark-ups, inspection reports, test packs, preservation records, equipment dossiers, and as-built documentation.</li> </ul> <strong>Contractor supervision and progress</strong> <ul> <li>Monitor contractor and subcontractor manpower, supervision, productivity, work quality, and compliance with the approved construction schedule.</li> <li>Review short-term work plans and report constraints, delays, interface issues, and recovery requirements to the mechanical superintendent or construction manager.</li> <li>Attend daily coordination meetings, site walkthroughs, progress reviews, toolbox talks, and technical meetings as required.</li> <li>Prepare clear daily and weekly reports covering progress, manpower, inspections, constraints, quality issues, HSE observations, and planned activities.</li> <li>Ensure personnel assigned to specialized mechanical activities are competent and appropriately qualified.</li> </ul> <strong>Interfaces, completion and commissioning</strong> <ul> <li>Coordinate mechanical interfaces with civil, structural, piping, electrical, instrumentation, telecom, HVAC, process, package vendors, and commissioning teams.</li> <li>Ensure foundations, embedded items, access routes, lifting provisions, maintenance clearances, utilities, piping connections, and electrical and instrumentation interfaces are ready.</li> <li>Support systemization, mechanical completion checks, punch-listing, turnover dossier preparation, and handover by system or subsystem.</li> <li>Participate in readiness reviews before equipment start-up and ensure outstanding construction, quality, preservation, and safety items are controlled.</li> <li>Support pre-commissioning and commissioning activities, including vendor attendance, flushing, lubrication, solo runs, functional tests, performance checks, and troubleshooting.</li> </ul> <h4>HSE responsibility</h4> <ul> <li>Ensure mechanical works comply with project HSE requirements, approved risk assessments, method statements, permit-to-work procedures, and isolation requirements.</li> <li>Pay particular attention to lifting and rigging, stored energy, pressure testing, rotating equipment, hot work, work at height, confined spaces, line breaking, and simultaneous operations.</li> <li>Intervene and stop unsafe work when necessary, report unsafe acts and conditions, and verify implementation of corrective measures.</li> <li>Participate in toolbox talks, safety walks, audits, incident investigations, and lessons-learned activities.</li> <li>Promote strong safety culture and good housekeeping in equipment areas, workshops, laydown areas, and mechanical work fronts.</li> </ul> <h4>Professional experience</h4> <ul> <li>More than 10 years of relevant experience in mechanical construction and site supervision on large EPC/EPSCC projects in oil and gas, power generation, water treatment, utilities, or major industrial facilities.</li> <li>Significant field experience supervising installation, alignment, testing, preservation, pre-commissioning, and handover of mechanical equipment and packages.</li> </ul> <h4>Experience in similar position</h4> <ul> <li>Previous experience as site mechanical supervisor, mechanical construction supervisor, or equivalent position on a major project.</li> <li>Hands-on experience with rotating equipment, static equipment, piping, pipeline, packaged units, pumps, compressors, turbines, vessels, heat exchangers, tanks, lifting equipment, and associated auxiliaries.</li> <li>Experience in large pumping stations, power generation facilities, water treatment plants, or major utility systems is preferred.</li> <li>Experience on Middle East projects and/or remote construction sites is an advantage.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong knowledge of mechanical construction methods, equipment installation, alignment, grouting, preservation, inspection, testing, pre-commissioning, and completion processes.</li> <li>Ability to read and interpret equipment layouts, general arrangement drawings, foundation drawings, mechanical data sheets, P&IDs, piping isometrics, vendor drawings, installation manuals, and AFC documentation.</li> <li>Good understanding of mechanical interfaces with civil, structural, piping, electrical, instrumentation, HVAC, process, and package systems.</li> <li>Familiarity with ITP, RFI, NCR, punch-list, mechanical completion, turnover, preservation, and quality-record processes.</li> <li>Working knowledge of applicable API, ASME, ISO, ASTM, NFPA, and project-specific standards and requirements.</li> <li>Competence in reporting, progress monitoring, work-front planning, and standard office applications.</li> </ul> <h4>Level / diploma</h4> <ul> <li>Bachelor’s degree in mechanical engineering preferred.</li> <li>A recognized technical diploma in mechanical engineering may be accepted with substantial relevant site experience.</li> <li>Relevant training in rotating equipment, alignment, lifting supervision, pressure testing, commissioning, or construction supervision is an advantage.</li> </ul> <h4>Languages</h4> <p>Proficiency in English is mandatory. Knowledge of Arabic is an advantage.</p> <h4>Soft skills</h4> <ul> <li>Strong field presence, leadership, and contractor-management capability.</li> <li>Clear communication and coordination skills in a multicultural environment.</li> <li>Proactive, practical, safety-conscious, and quality-focused approach.</li> <li>Ability to prioritize work, resolve site issues, manage interfaces, and work under schedule pressure.</li> <li>Ability to challenge non-compliant work and intervene firmly when safety or quality is at risk.</li> </ul> <p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The site planning engineer is responsible for developing and managing site planning activities to ensure that the project is completed on time and within budget. This role involves coordinating with multidisciplinary teams during the FEED and design phases, focusing on onshore and brownfield projects. The site planning engineer will play a crucial role in implementing effective planning strategies, ensuring resource optimization, and mitigating risks associated with site operations.</p> <h4>Job responsibilities</h4> <li>Develop and maintain detailed project schedules using suitable project management software.</li> <li>Collaborate with engineering, construction, and procurement teams to assess project requirements and ensure alignment with project scope.</li> <li>Perform risk analysis and assessment to identify potential issues in project execution and propose corrective actions.</li> <li>Monitor project progress and report regularly to senior management and project stakeholders.</li> <li>Facilitate site assessments and prepare relevant reports to support decision-making processes.</li> <li>Ensure compliance with safety regulations and promote a culture of safety on-site.</li> <li>Maintain effective communication with all project stakeholders and foster strong working relationships.</li> <li>Participate in project meetings, providing insights on planning and scheduling aspects.</li> <li>Contribute to continuous improvement efforts by proposing innovative planning solutions and methodologies.</li> <li>Assist in the development of progress reports and other documentation as required by project management.</li> <h4>Functional responsibilities</h4> <li>Implementing site logistics and resource plans, considering workforce and construction equipment requirements.</li> <li>Coordinating with the engineering team to integrate design changes into the project schedule effectively.</li> <li>Evaluating and monitoring subcontractor performance in relation to planning and execution benchmarks.</li> <li>Preparing and analyzing variance reports to identify schedule delays or inefficiencies.</li> <h4>Technical skills</h4> <li>Proficient in project scheduling software (e.g., Primavera P6, MS Project).</li> <li>Strong understanding of project management principles, methodologies, and tools.</li> <li>Familiarity with FEED (Front-End Engineering Design) processes and brownfield project challenges.</li> <li>Ability to read and interpret engineering drawings and specifications.</li> <li>Competent in risk management and mitigation strategies.</li> <h4>Soft skills</h4> <li>Excellent communication and interpersonal skills to work collaboratively with diverse teams.</li> <li>Strong analytical and problem-solving abilities.</li> <li>Proactive attitude and ability to work under tight deadlines and pressure.</li> <li>Strong organizational skills and attention to detail.</li> <h4>Qualification</h4> <p>Must have 10 years of experience in site planning and project controls.</p> <p><strong>Mandatory:</strong></p> <li>Bachelor’s degree in engineering in related field from reputed university.</li> <p><strong>Good to have:</strong></p> <li>Master’s degree in engineering in related field from reputed university.</li> <h4>Work environment</h4> <li>The role will primarily be based on-site in Iraq, requiring a commitment to a dynamic and fast-paced work environment. The position may involve working in varying weather conditions and adhering to local health and safety regulations.</li> <li>Flexibility in working hours may be required to accommodate project demands and deadlines.</li></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Electronic PTW (ePTW) Administrator will be responsible for ensuring the smooth implementation of the ePTW system in areas where it has already been rolled out, as well as supporting its rollout in new areas and departments. The Electronic Permit to Work (ePTW) Administrator is responsible for managing, maintaining, and supporting the electronic Permit to Work system to ensure safe, compliant, and efficient control of work activities. The role includes system administration, user support, permit workflow monitoring, training coordination, reporting, and ensuring consistent adherence to these procedures throughout the organization.</p> <h4>Duties and responsibilities</h4> <ul> <li>Administer and maintain the ePTW system and associated databases.</li> <li>Create, modify, deactivate, and manage user accounts, roles, and permissions.</li> <li>Configure workflows, templates, and system settings in line with company procedures.</li> <li>Monitor system performance and coordinate with IT/software vendors for troubleshooting and upgrades.</li> <li>Ensure data integrity, system availability, and backup compliance.</li> <li>Support ePTW development and rollout in Majnoon Oilfield and ensure smooth transition from a paper-based to an electronic PTW system.</li> <li>Support permit issuers, receivers, and approvers in the proper use of the ePTW system.</li> <li>Monitor live permits and ensure permits are processed according to approved workflows.</li> <li>Assist in resolving permit conflicts, workflow issues, and system-related delays.</li> <li>Coordinate contingency plans during system outages, including implementation of paper-based permits when required.</li> <li>Ensure the ePTW process complies with company HSE standards and regulatory requirements.</li> <li>Support implementation of isolation management and simultaneous operations (SIMOPS) controls.</li> <li>Maintain records and audit trails for permits, approvals, and system activities.</li> <li>Participate in HSE audits, inspections, and incident investigations related to permit control.</li> <li>Conduct user training and awareness sessions for employees and contractors.</li> <li>Provide coaching and technical support to system users.</li> <li>Develop user guides, procedures, and training materials.</li> <li>Support competency assessments related to ePTW usage.</li> <li>Generate daily, weekly, and monthly permit reports and KPIs.</li> <li>Maintain documentation related to system configuration, procedures, and change management.</li> <li>Track system issues, corrective actions, and improvement initiatives.</li> <li>Prepare management reports regarding permit statistics and system performance.</li> <li>Identify opportunities to improve the ePTW process and workflow efficiency.</li> </ul> <h4>Qualification</h4> <p>Suitable tertiary qualification, preferably technical.</p> <h4>Experience</h4> <ul> <li>Experience in Permit to Work systems, HSE operations, or industrial site administration.</li> <li>Familiarity with electronic Permit to Work software and workflow systems.</li> <li>Good understanding of isolation management, risk assessment, and work authorization processes.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>English.</li> <li>Highly skilled in using Microsoft applications including Word, Excel, PowerPoint, and Outlook.</li> <li>Skill in software and database tools related to ePTW systems.</li> </ul> <h4>Key competencies</h4> <ul> <li>Ability to work in harsh environment.</li> <li>Culturally and ethically aware.</li> <li>Problem solving.</li> <li>Team coordination.</li> <li>Communication skills.</li> <li>Safety leadership.</li> <li>Analytical thinking.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The field doctor reports to the lead doctor and is responsible for supporting the delivery and coordination of field medical services, including occupational health, emergency preparedness, and medical response activities. The role supports patient care activities in the field, including emergency and trauma response, while ensuring effective medical readiness and timely support for site operations. The field doctor also participates in HSE inspections, safety and health activities, and contributes to the implementation of occupational health and hygiene programs.</p> <p>The position works closely with site management, HSE teams, and contractors to support medical coverage, emergency response capability, and overall workforce health and safety within the field environment.</p> <h4>Duties and responsibilities</h4> <ul> <li>Implement the primary health care program for all personnel and deliver hygiene quality assurance on behalf of IFMS in the Majnoon Oil Field.</li> <li>Ensure effective management of all medical operations in MFD for primary occupational health, emergency and trauma care.</li> <li>Draft and maintain all procedures and health documentation for the IFMS function in line with international standards and local legislation.</li> <li>Ensure effective implementation of health requirements in MFD for both staff and contractors.</li> <li>Prepare activity plans to accomplish all work required by the field procedures and ensure sufficient manpower utilization for work execution.</li> <li>Ensure GLMS systems are maintained with up-to-date FTW information.</li> <li>Follow up on HRA with SMEs and relevant parties to ensure that all control measures are implemented, maintained, and reviewed periodically.</li> <li>Implement an FTW program by giving the required advice and ensure that all employees in the field are physically and mentally fit for their work requirements and support business based on outcomes of fitness to work assessment plan.</li> <li>Set and implement the RTW policy in accordance with IFMS standards and local legislation and provide the required support to all staff and contractors.</li> <li>Provide guidance and enable the emergency and occupational health training for medical staff and other BOC assignees as well as medical service providers.</li> <li>Support the implementation of the Facilities HACCP program within the field through monthly inspections and follow-up of actions for both facilities and contractors.</li> <li>Ensure continuous communication internally with departments, external clients, government, and private health institutes to provide effective support for the business.</li> <li>Ensure the effective implementation of MERP including bridging requirements for contractors.</li> <li>Effectively coordinate MEDIVAC procedures with insurance companies, ER companies, and management.</li> <li>Follow up MEDIVAC cases ensuring all medical aspects are well covered, followed, and closed.</li> <li>Manage all aspects of third-party medical services.</li> <li>Implement and update a medical case action tracker to ensure effective close out of all cases.</li> <li>Support the tendering process by evaluating the contractor’s health systems.</li> <li>Support the RFCE process and ensure that all contractors are ready to mobilize.</li> <li>Review contractor’s documentation ensuring that all are compliant with MFD standards.</li> </ul> <h4>Qualification & training requirements</h4> <ul> <li>MBChB - Bachelor degree in medicine or equivalent.</li> <li>BLS or ALS or ITLS certification.</li> <li>Professional Health Care Council registrations.</li> </ul> <h4>Experience</h4> <ul> <li>Experience in medical operations, emergency response support, healthcare administration, or related activities, preferably in industrial or remote-site environments.</li> <li>Basic knowledge of HACCP principles and food safety requirements, with experience supporting food safety and health compliance activities being an advantage.</li> <li>Good understanding of and demonstrable hands-on experience in all functional aspects of emergency and occupational health and hygiene including HRAs, FTW & FTR, HACCP, water and food safety, communicable disease and preventive medicine, employee support, ergonomic quick scan, health system management, external and internal communications, contractor management, emergencies and MERP management as well as expert in providing health advice and services.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>MS Office: Excel - intermediate, Word – intermediate, PowerPoint – intermediate.</li> <li>Proficient in English – verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Skill in conducting fitness to work program.</li> <li>Managerial and team management skills.</li> <li>Knowledge to provide advice and support business based on outcomes of fitness to work assessment plan.</li> <li>Skilled in contributing to the planning and implementation of healthcare requirements within business.</li> <li>Skilled to deliver technical meeting minutes, proposals, inspections, and audits.</li> <li>Good presentation skills in both English and Arabic, enabling the delivery of training, technical presentations, and awareness sessions to expatriates, local staff, and community.</li> <li>In-depth knowledge in social impacts and the enablement of the SP team.</li> <li>Experience in training in the field of occupational health.</li> <li>Control the medical emergency requirements occupational health training for medics and other SOC assignees as well as medical providers.</li> <li>Possess a strong drive towards solving problems that could delay work, especially in volatile locations such as Iraq.</li> <li>Determined to provide maximum support in the field to all contractors and subcontractors to deliver the work on time.</li> <li>Have high ability to work efficiently in high risk and low security areas.</li> <li>Deliver tasks on time despite difficulties in logistics, social, etc.</li> <li>Have experience dealing with local community onsite to deliver high support in the social impact area.</li> <li>Show high drive to change work approaches for the team by changing work scope, area, times, and rotations to suit specific time of the project and works.</li> <li>Have high ability to construct and develop the field health team and put documents and procedures in place.</li> <li>Ability to generate new ways of integrating the team with other departments.</li> <li>Participate efficiently in improving the company reputation through stakeholder management.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Technology Development Associate</h4> <p><strong>Entry-level | Iraqi nationals | Majnoon Oil Field, Basrah</strong></p> <h4>Role details</h4> <p><strong>Department:</strong> Information Technology<br> <strong>Location:</strong> Majnoon Oil Field, Basrah, Iraq<br> <strong>Eligibility:</strong> Iraqi nationals only<br> <strong>Work pattern:</strong> 5/2 daily commuter<br> <strong>Reports to:</strong> Technology Development Supervisor</p> <h4>About the role</h4> <p>KBR is seeking motivated Iraqi national graduates to join the IFMS project at Majnoon Oil Field as Technology Development Associates. This is an entry-level position that provides a structured development pathway into the disciplines of Information Management (IM), Information Technology (IT), Digital Solutions, Cyber Security, Applications, Data Management, Operational Technology, and SAP.</p> <p>The role is designed for early-career graduates who demonstrate strong potential, a willingness to learn, and a commitment to building a long-term career in the oil and gas sector. You will follow a customized development plan combining formal training, on-the-job experience, mentoring, and practical project assignments, with the aim of progressing into specialist or technical roles upon successful completion of the program.</p> <h4>Key responsibilities</h4> <ul> <li>Participate in a structured graduate development and rotational training program across relevant technology disciplines</li> <li>Support daily activities within assigned teams including IM, IT, Cyber Security, Digital Solutions, SAP, Data Management, and Operational Technology</li> <li>Assist experienced professionals with project, operational, and end-user support activities</li> <li>Complete assigned technical, business, and professional development courses</li> <li>Contribute to data collection, analysis, reporting, and documentation tasks</li> <li>Participate in workshops, mentoring sessions, and knowledge-sharing activities</li> <li>Support technology adoption, user engagement, and continuous improvement initiatives</li> <li>Develop an understanding of oil and gas business processes and the technologies that support them</li> <li>Demonstrate commitment to HSE standards, company policies, and professional conduct at all times</li> </ul> <h4>What we are looking for</h4> <p>We are recruiting on potential, not experience. The following attributes define the candidate we want:</p> <ul> <li>Strong written and verbal communication skills in English</li> <li>Positive, professional attitude with high levels of motivation and enthusiasm</li> <li>Intellectual curiosity and a genuine desire to learn</li> <li>Strong interpersonal and teamwork capabilities</li> <li>Good organizational and time management skills</li> <li>Ability to adapt to changing priorities in a dynamic field environment</li> <li>Commitment to personal growth and continuous professional development</li> <li>Desire to build a long-term career within Iraq's energy sector</li> </ul> <h4>Qualifications & requirements</h4> <p><strong>Education</strong><br> Bachelor's degree from an accredited institution — recent graduates encouraged to apply<br> Relevant disciplines include: Information Technology, Computer Science, Information Systems, Engineering, Data Science, Business Information Systems, Electronics, Telecommunications, Cyber Security, or Business English / Communications</p> <p><strong>Language</strong><br> English: Good written and verbal communication required<br> Arabic: Native</p> <p><strong>Technical skills</strong><br> Basic familiarity with Microsoft Office 365, computer hardware/software, and digital tools<br> General awareness of IT, data, or cyber security concepts is advantageous — training will be provided</p> <p><strong>Advantageous certifications (not mandatory)</strong><br> Microsoft Fundamentals, ITIL Foundation, Cisco Networking Fundamentals, Cyber Security Fundamentals, Cloud Fundamentals (Azure / AWS), Data Analytics Fundamentals, or any recognized technology certification</p> <h4>Career development</h4> <p>Upon successful completion of the program, associates may progress into specialist roles such as IT Support Specialist, Information Management Specialist, SAP Support Analyst, Cyber Security Analyst, Digital Solutions Coordinator, Data Analyst, Infrastructure Support Engineer, or Applications Support Analyst — aligned to individual aptitude and business requirements.</p></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Technology Development Associate</h4> <p><strong>Entry-level | Iraqi nationals | Majnoon Oil Field, Basrah</strong></p> <h4>Role details</h4> <p><strong>Department:</strong> Information Technology<br> <strong>Location:</strong> Majnoon Oil Field, Basrah, Iraq<br> <strong>Eligibility:</strong> Iraqi nationals only<br> <strong>Work pattern:</strong> 5/2 daily commuter<br> <strong>Reports to:</strong> Technology Development Supervisor</p> <h4>About the role</h4> <p>KBR is seeking motivated Iraqi national graduates to join the IFMS project at Majnoon Oil Field as Technology Development Associates. This is an entry-level position that provides a structured development pathway into the disciplines of Information Management (IM), Information Technology (IT), Digital Solutions, Cyber Security, Applications, Data Management, Operational Technology, and SAP.</p> <p>The role is designed for early-career graduates who demonstrate strong potential, a willingness to learn, and a commitment to building a long-term career in the oil and gas sector. You will follow a customized development plan combining formal training, on-the-job experience, mentoring, and practical project assignments, with the aim of progressing into specialist or technical roles upon successful completion of the program.</p> <h4>Key responsibilities</h4> <ul> <li>Participate in a structured graduate development and rotational training program across relevant technology disciplines</li> <li>Support daily activities within assigned teams including IM, IT, Cyber Security, Digital Solutions, SAP, Data Management, and Operational Technology</li> <li>Assist experienced professionals with project, operational, and end-user support activities</li> <li>Complete assigned technical, business, and professional development courses</li> <li>Contribute to data collection, analysis, reporting, and documentation tasks</li> <li>Participate in workshops, mentoring sessions, and knowledge-sharing activities</li> <li>Support technology adoption, user engagement, and continuous improvement initiatives</li> <li>Develop an understanding of oil and gas business processes and the technologies that support them</li> <li>Demonstrate commitment to HSE standards, company policies, and professional conduct at all times</li> </ul> <h4>What we are looking for</h4> <p>We are recruiting on potential, not experience. The following attributes define the candidate we want:</p> <ul> <li>Strong written and verbal communication skills in English</li> <li>Positive, professional attitude with high levels of motivation and enthusiasm</li> <li>Intellectual curiosity and a genuine desire to learn</li> <li>Strong interpersonal and teamwork capabilities</li> <li>Good organizational and time management skills</li> <li>Ability to adapt to changing priorities in a dynamic field environment</li> <li>Commitment to personal growth and continuous professional development</li> <li>Desire to build a long-term career within Iraq's energy sector</li> </ul> <h4>Qualifications & requirements</h4> <p><strong>Education</strong><br> Bachelor's degree from an accredited institution — recent graduates encouraged to apply<br> Relevant disciplines include: Information Technology, Computer Science, Information Systems, Engineering, Data Science, Business Information Systems, Electronics, Telecommunications, Cyber Security, or Business English / Communications</p> <p><strong>Language</strong><br> English: Good written and verbal communication required<br> Arabic: Native</p> <p><strong>Technical skills</strong><br> Basic familiarity with Microsoft Office 365, computer hardware/software, and digital tools<br> General awareness of IT, data, or cyber security concepts is advantageous — training will be provided</p> <p><strong>Advantageous certifications (not mandatory)</strong><br> Microsoft Fundamentals, ITIL Foundation, Cisco Networking Fundamentals, Cyber Security Fundamentals, Cloud Fundamentals (Azure / AWS), Data Analytics Fundamentals, or any recognized technology certification</p> <h4>Career development</h4> <p>Upon successful completion of the program, associates may progress into specialist roles such as IT Support Specialist, Information Management Specialist, SAP Support Analyst, Cyber Security Analyst, Digital Solutions Coordinator, Data Analyst, Infrastructure Support Engineer, or Applications Support Analyst — aligned to individual aptitude and business requirements.</p></p><p></p>

<p><h4>Instrument & Controls Lead Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>We are looking for an Instrument & Controls (I&C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument & Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&C Engineers as direct reports.</p> <h4>Responsibilities</h4> <ul> <li>Production delivery, optimisation & excellent performance</li> <li>Responsible for day-to-day optimization of I&C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity.</li> <li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed, and managed via operational risk assessment processes.</li> <li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li> <li>Prioritize I&C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li> <li>Actively lead continuous improvement projects involving instrumentation, automation, and control systems; promote continuous improvement philosophy and engage site teams to drive improvement initiatives.</li> </ul> <h4>Qualifications</h4> <ul> <li>Above 10 years experience in oil and gas industry, preferably with international oil companies (direct or contract).</li> <li>Technical degree in engineering or relevant engineering subject.</li> <li>Experience in previous asset engineering or operations engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal, and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – Office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behaviour change management.</li> <li>Not essential but preferable: professional (chartered) engineer.</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Certified professional engineer.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <p>KBR is looking for a Site Electrical Supervisor to be based in Basra, Iraq – daily commute.</p> <h4>Main missions</h4> <ul> <li>Ensure safe, compliant, and high-quality execution of all electrical construction, installation, testing, and pre-commissioning activities at site.</li> <li>Supervise EPC contractor and subcontractors electrical works in accordance with approved drawings, project specifications, method statements, ITPs, applicable codes, and company requirements.</li> <li>Coordinate electrical activities with construction, engineering, QA/QC, HSE, commissioning, and other disciplines to achieve the project schedule and system priorities.</li> <li>Identify technical, quality, safety, and constructability issues, and ensure timely resolution and close-out.</li> <li>Support mechanical completion, energization readiness, commissioning, and handover of electrical systems.</li> </ul> <h4>Key activities</h4> <p><strong>Site supervision and construction control</strong></p> <ul> <li>Supervise daily electrical construction activities, including installation of HV, MV, and LV equipment and systems.</li> <li>Monitor installation of transformers, switchgear, motor control centres, generators, UPS and DC systems, distribution boards, power and control cables, lighting, small power, earthing, lightning protection, and electrical heat tracing where applicable.</li> <li>Verify equipment location, orientation, access, supports, interfaces, and installation against approved AFC drawings and vendor requirements.</li> <li>Ensure cable tray, ladder, conduit, cable pulling, segregation, dressing, glanding, termination, identification, and fire-stopping works comply with project requirements.</li> <li>Monitor preservation, storage, handling, and protection of electrical equipment and materials at site.</li> <li>Ensure work fronts are properly planned and that required drawings, materials, tools, access, permits, and preceding works are available.</li> </ul> <p><strong>Technical compliance and quality</strong></p> <ul> <li>Ensure execution in accordance with approved AFC drawings, specifications, equipment data sheets, vendor documentation, method statements, ITPs, and applicable international standards.</li> <li>Participate in inspection requests and witness required hold and witness points with QA/QC personnel.</li> <li>Inspect equipment installation, bolted connections, cable routing and segregation, terminations, earthing connections, labelling, and general workmanship.</li> <li>Witness or review electrical tests, as applicable, including insulation resistance, continuity, earthing resistance, winding resistance, ratio tests, protection relay tests, cable tests, functional checks, and interlock verification.</li> <li>Review and follow up punch items, site observations, non-conformities, and corrective actions until closure.</li> <li>Assist in checking red-line mark-ups, test records, inspection reports, and as-built documentation.</li> </ul> <p><strong>Contractor supervision and progress</strong></p> <ul> <li>Monitor contractor and subcontractor manpower, supervision, productivity, work quality, and compliance with the approved construction schedule.</li> <li>Review short-term work plans and report constraints, delays, interface issues, and recovery requirements to the Electrical Superintendent or Construction Manager.</li> <li>Attend daily coordination meetings, site walkthroughs, progress reviews, toolbox talks, and technical meetings as required.</li> <li>Prepare clear daily and weekly reports covering progress, manpower, inspections, constraints, quality issues, HSE observations, and planned activities.</li> <li>Ensure contractor personnel assigned to specialized electrical work are competent and appropriately authorized.</li> </ul> <p><strong>Interfaces, completion and commissioning</strong></p> <ul> <li>Coordinate electrical interfaces with civil, structural, mechanical, piping, instrumentation, telecom, HVAC, package vendors, and commissioning teams.</li> <li>Ensure foundations, embedded items, sleeves, trenches, rooms, supports, cable routes, and equipment access are ready before electrical installation.</li> <li>Support systemization, mechanical completion checks, punch-listing, turnover dossier preparation, and handover by system or subsystem.</li> <li>Participate in energization readiness reviews and ensure outstanding construction, quality, and safety items are controlled before energization.</li> <li>Support pre-commissioning and commissioning activities, including vendor attendance, functional testing, loop and interlock checks, and troubleshooting.</li> </ul> <h4>HSE responsibility</h4> <ul> <li>Ensure electrical works are performed in accordance with project HSE requirements, approved risk assessments, method statements, permit-to-work procedures, and isolation rules.</li> <li>Pay particular attention to electrical safety, lockout/tagout, temporary power, excavation and underground services, lifting operations, work at height, confined spaces, and simultaneous operations.</li> <li>Intervene and stop unsafe work when necessary, report unsafe acts and conditions, and verify implementation of corrective measures.</li> <li>Participate in toolbox talks, safety walks, audits, incident investigations, and lessons-learned activities.</li> <li>Promote a strong safety culture and ensure good housekeeping in electrical work areas, substations, electrical rooms, and cable routes.</li> </ul> <h4>Professional experience</h4> <ul> <li>More than 10 years of relevant experience in electrical construction and site supervision on large EPC/EPSCC projects in oil and gas, power generation, water treatment, utilities, or major industrial facilities.</li> <li>Significant field experience supervising electrical installation, testing, pre-commissioning, and handover activities.</li> </ul> <h4>Experience in similar position</h4> <ul> <li>Previous experience as Site Electrical Supervisor, Electrical Construction Supervisor, or equivalent position on a major project.</li> <li>Hands-on experience with HV, MV, and LV systems; transformers; switchgear; MCCs; UPS and DC systems; power and control cables; earthing; lighting; and electrical equipment associated with rotating and packaged equipment.</li> <li>Experience in power generation facilities, large pumping stations, substations, or water treatment plants is preferred.</li> <li>Experience on Middle East projects and/or remote construction sites is an advantage.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong knowledge of electrical construction methods, installation practices, inspection requirements, testing, energization, and completion processes.</li> <li>Ability to read and interpret single-line diagrams, schematics, wiring diagrams, cable schedules, equipment layouts, earthing layouts, interconnection diagrams, vendor drawings, and AFC documentation.</li> <li>Good understanding of electrical interfaces with civil, mechanical, instrumentation, telecom, HVAC, and package systems.</li> <li>Familiarity with ITP, RFI, NCR, punch-list, mechanical completion, turnover, and quality-record processes.</li> <li>Working knowledge of applicable IEC, IEEE, NFPA, ISO, and project-specific standards and requirements.</li> <li>Competence in reporting, progress monitoring, work-front planning, and use of standard office applications.</li> </ul> <h4>Level / diploma</h4> <ul> <li>Bachelor’s degree in Electrical Engineering preferred.</li> <li>A recognized technical diploma in Electrical Engineering may be accepted with substantial relevant site experience.</li> <li>Relevant electrical safety, HV authorization, commissioning, or construction supervision training is an advantage.</li> </ul> <h4>Languages</h4> <ul> <li>Proficiency in English is mandatory. Knowledge of Arabic is an advantage.</li> </ul> <h4>Soft skills</h4> <ul> <li>Strong field presence, leadership, and contractor-management capability.</li> <li>Clear communication and coordination skills in a multicultural environment.</li> <li>Proactive, practical, safety-conscious, and quality-focused approach.</li> <li>Ability to prioritize work, resolve site issues, manage interfaces, and work under schedule pressure.</li> <li>Ability to challenge non-compliant work and intervene firmly when safety or quality is at risk.</li> </ul> <p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>

<p>Madarek Engineering Group is seeking a highly experienced and technically strong Senior Electrical Project Manager with a solid EPC background and a proven track record in managing large-scale, technically complex projects. The successful candidate will take full ownership of the electrical scope from engineering and procurement through construction, testing &amp; commissioning, and final handover, with responsibility for programme, cost, quality, resources, and overall project delivery. Key Responsibilities Lead the complete electrical scope from engineering and procurement through construction, testing &amp; commissioning, and handover. Take ownership of project planning, scheduling, resource allocation, cost control, progress, and overall project performance. Develop, maintain, and control project programmes using Primavera P6, including baselines, critical path, resource planning, look-ahead schedules, progress updates, delay analysis, and recovery programmes. Provide technical leadership for MV/LV distribution, transformers, generators, UPS, ATS, switchgear, power distribution, lighting, ELV systems, earthing, and lightning protection. Coordinate electrical interfaces with mechanical, architectural, civil, ICT/ELV, and specialist systems, resolving technical issues before they affect execution. Manage the engineering-to-procurement interface, including BOQs, specifications, technical evaluations, material submittals, vendors, suppliers, and subcontractors. Monitor long-lead equipment through technical approval, manufacturing, delivery, installation, and commissioning. Lead site execution, subcontractors, resources, quality, inspections, and multidisciplinary coordination. Lead testing &amp; commissioning, system integration, snagging, and final handover. Coordinate directly with clients, consultants, vendors, subcontractors, and internal project teams. Identify technical, programme, procurement, contractual, and execution risks early and implement practical corrective and recovery measures.</p><p><strong>Desired Candidate Profile</strong></p><p>Requirements Bachelor's Degree in Electrical Engineering. Minimum 15 years of relevant experience, including at least 5 years as a Project Manager or Senior Project Manager on major projects. Proven experience in large-scale EPC, MEP, hospitality, commercial, industrial, or infrastructure projects. Proven track record of managing projects end-to-end, from engineering and procurement through execution, testing &amp; commissioning, and handover. Excellent hands-on technical knowledge of electrical power and building systems. Advanced hands-on proficiency in Primavera P6, including baseline development, critical path analysis, resource planning, progress monitoring, delay analysis, and recovery planning. Solid experience in project planning, cost control, procurement, subcontract management, construction methodology, and project sequencing. Proven leadership of multidisciplinary teams, specialist subcontractors, and major equipment packages, with strong decision-making, negotiation, and problem-solving skills. Good understanding of contracts, variations, delays, project reporting, and claims-related documentation. Excellent command of English. Preferred Qualifications PMP or equivalent certification, with practical application of PMI methodologies. Previous project experience in the GCC. What We Offer Competitive package including accommodation, flights, and residency support.</p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <p>KBR is looking for a Risk Coordinator to be based in Basra, Iraq – daily commute.</p> <p>The role is responsible for coordinating project risk management activities and supporting schedule integration across the project.</p> <h4>Accountability</h4> <p>The Schedule & Risk Coordinator is accountable for maintaining an effective Project Risk Management process, coordinating risk mitigation activities, and ensuring alignment of interface schedules and milestones across the CSSP Project. The role supports integration between WIP and Pipeline Project schedules, follows execution progress from the field, and provides reliable information to support project decision-making. The position serves as backup to the Planning Engineer when required; however, ownership of the Integrated Project Schedule, schedule development, forecasting, and baseline control remains with the Planning Engineer.</p> <h4>Qualifications/Experience required</h4> <ul> <li>Bachelor's degree in Engineering, Project Management, Construction Management, Risk Management, or a related discipline.</li> <li>Minimum 7-10 years of experience in Project Controls, Construction Planning, Risk Management, or Project Execution within major Oil & Gas, Energy, Infrastructure, or EPC projects.</li> <li>Extensive field construction experience with direct involvement in site execution, construction sequencing, workfront planning, contractor performance monitoring, and multidisciplinary team coordination.</li> <li>Proven experience in developing, maintaining, and challenging Project Risk Registers, risk assessments, mitigation plans, and risk management processes.</li> <li>Demonstrated experience in schedule integration, interface management, and coordination of critical milestones across multiple contractors, stakeholders, and project packages.</li> <li>Demonstrated ability to identify, assess, and mitigate construction, logistics, procurement, interface, and country-specific project risks.</li> <li>Proven ability to independently challenge contractor schedules, risk assessments, mitigation strategies, and execution plans through analytical review and field verification.</li> <li>Experience facilitating risk workshops and coordinating mitigation actions with risk owners and project stakeholders.</li> <li>Experience working in complex multi-contractor execution environments, including large-scale brownfield and greenfield developments.</li> <li>Ability to provide risk-based assessments and construction-driven recommendations to support project management decision-making.</li> </ul> <h4>Technical Skills</h4> <ul> <li>Strong knowledge of project risk management methodologies, quantitative and qualitative risk assessment techniques, and risk reporting systems.</li> <li>Strong understanding of construction execution processes, construction sequencing, work packaging, site productivity, and contractor performance monitoring.</li> <li>Strong capability to evaluate construction readiness, identify execution constraints, and assess impacts on project milestones and critical paths.</li> <li>Proficient in Primavera P6 and schedule analysis techniques, including critical path analysis, float consumption, schedule risk assessment, and recovery planning.</li> </ul> <h4>Personal Competencies</h4> <ul> <li>Strong analytical and problem-solving skills.</li> <li>Strong coordination and stakeholder management capabilities.</li> <li>Excellent communication and facilitation skills.</li> <li>Ability to interact effectively with engineering, construction, contractor, PMC, and project management teams.</li> <li>Strong organizational and follow-up skills with attention to detail.</li> <li>Ability to work in a multicultural and fast-paced project environment.</li> <li>Languages: English is mandatory, knowledge of French and Arabic is a plus.</li> </ul> <p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>