وظائف مهندس ديكور - البصره العراق

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Assistant Government Relations Officer (GRO) Responsibilities</h4> <ul> <li><strong>Oil Field Passes (OFP) for the KBR staff in Basra, Iraq</strong><br> Preparing the required paperwork for OFP applications.<br> Getting the required signatures and approvals as required.<br> Liaising with government officials and the Clearance Office for any issues related to obtaining OFPs.</li> <li><strong>Support to blood test fixers with arranging blood tests for KBR expatriate personnel</strong><br> Preparing the respective paperwork.<br> Visiting the Health Department in Basra.</li> <li><strong>Other support, as required.</strong></li> <li><strong>Support for LOI applications</strong><br> Preparing the required paperwork.<br> Visiting the Ministry of Interior and other government offices.</li> <li><strong>Other support, as required.</strong></li> <li><strong>Other tasks, as requested by the Senior GRO.</strong></li> </ul> <h4>About this job</h4> <p>Work location is in Basra, Iraq.<br> Daily commuter, 8 working hours per day, 6 days per week.</p> <h4>Requirements for the candidate</h4> <ul> <li>Nationality - Iraqi</li> <li>Bachelor university degree in the relevant field</li> <li>Good communication skills</li> <li>Good Arabic and basic English language knowledge</li> <li>Good computer skills – MS Office</li> </ul></p><p></p>

<p><br></p> <p> </p> <p> <strong> The role </strong> </p> <p>This is an exciting opportunity for an experienced Piping Drafter 3D to join our Iraq Business Unit.</p> <p> <strong>Our Clients and Projects </strong> </p> <p> <strong>Designing the future. Transforming the world. </strong> </p> <p>Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering &amp; Design Services. The Vision of this Contract is to enhance the production &amp; assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery &amp; Replacement/upgrade of obsolete equipment, piping &amp; systems.</p> <p> <strong> What we can offer </strong> </p> <ul> <li> <strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq </li> <li> <strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice </li> <li> <strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market </li> <li> <strong>Medical Insurance: </strong>Ensures inpatient and outpatient medical care is available should you require treatment. </li> <li> <strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests </li> <li> <strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession </li> <li> <strong>Long Service Award: </strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones </li> </ul> <p> </p> <p> <strong> Job Objectives: </strong> </p> <p>The Piping Designer administratively reports to the Wood Site Manager. The Piping Designer supports various Project Managers for the project that he/she is assigned. The role of the Piping Designer is to produce detailed design deliverables as per project Scope of Work. The Piping Designer will also compile design data to support design estimating activities and/or assist Wood Piping Lead with design estimating activities as required.</p> <p> </p> <p> <strong>Key Accountabilities and Responsibilities:</strong> </p> <ul> <li>Meet or exceed the company and customer safety standards.</li> <li>Comply with all company and customer procedures, engineering practices and other applicable standards.</li> <li>Read and fully understand P&amp;ID s and other related project documents which describe the Scope of Work </li> <li>Perform initial field verification to determine optimum equipment and piping layout, tie-ins to existing facilities. </li> <li>Conceptualize initial design based on red-lined P&amp;IDs depicting project Scope of Work </li> <li>Utilize experience in mechanical equipment, piping and piping components as currently used in chemical and refining manufacturing facilities including pumps, compressors, exchangers, pressure vessels, tanks, towers, pipelines, valves, control valves, filters, piping process codes and use of piping specifications, standards, piping components, materials, and industry codes. </li> <li>Produce detail piping design package based on red-lined P&amp;IDs depicting project Scope of Work, including but not limited to, P&amp;IDs, tie-in location plans, piping plans, sections, demolition drawings and isometrics. </li> <li>Utilize 3D modeling software and 3D survey scan data to produce package deliverables. </li> <li>Prepare and maintain; project drawing/deliverables list, including but not limited to; project line list, project tie-in list and bill of materials list. </li> <li>Provide project progress update to Project Manager, Wood Piping Lead and Wood Site Lead</li> <li>Support Wood and Project Manager in maintaining budget, schedule, and adherence to the agreed to Scope of Work </li> <li>Perform checking of piping design packages and work with responsible designer in assisting to correct any drawings as required. </li> <li>Maintain cooperative, efficient, and good team working environment. </li> <li>Communicate, both verbally and in written form in a professional manner</li> </ul> <p> </p><p><strong>Desired Candidate Profile</strong></p><p> <strong>What makes you remarkable? </strong> </p> <p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. </p> <p> <strong>Expected:</strong> </p> <ul> <li>8-12+ years Pipe Drafting, Design &amp; Layout experience working in the chemical and refining manufacturing industry </li> <li>Proficiency in AutoDesk AutoCAD 2019 and AutoCAD ReCap 3D Scan Management software </li> <li>Proficiency in 3D Modeling software, CadWorx 2019 and later (Preferred) </li> <li>Proficiency in Microsoft products such as Word, Excel, and Outlook </li> <li>Proficiency in AVEVA E3D (Preferred) </li> <li>Field experience, able to wear required PPE and drive safely to jobsite for design verification.</li> </ul>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Technology Development Associate</h4> <p><strong>Entry-level | Iraqi nationals | Majnoon Oil Field, Basrah</strong></p> <h4>Role details</h4> <p><strong>Department:</strong> Information Technology<br> <strong>Location:</strong> Majnoon Oil Field, Basrah, Iraq<br> <strong>Eligibility:</strong> Iraqi nationals only<br> <strong>Work pattern:</strong> 5/2 daily commuter<br> <strong>Reports to:</strong> Technology Development Supervisor</p> <h4>About the role</h4> <p>KBR is seeking motivated Iraqi national graduates to join the IFMS project at Majnoon Oil Field as Technology Development Associates. This is an entry-level position that provides a structured development pathway into the disciplines of Information Management (IM), Information Technology (IT), Digital Solutions, Cyber Security, Applications, Data Management, Operational Technology, and SAP.</p> <p>The role is designed for early-career graduates who demonstrate strong potential, a willingness to learn, and a commitment to building a long-term career in the oil and gas sector. You will follow a customized development plan combining formal training, on-the-job experience, mentoring, and practical project assignments, with the aim of progressing into specialist or technical roles upon successful completion of the program.</p> <h4>Key responsibilities</h4> <ul> <li>Participate in a structured graduate development and rotational training program across relevant technology disciplines</li> <li>Support daily activities within assigned teams including IM, IT, Cyber Security, Digital Solutions, SAP, Data Management, and Operational Technology</li> <li>Assist experienced professionals with project, operational, and end-user support activities</li> <li>Complete assigned technical, business, and professional development courses</li> <li>Contribute to data collection, analysis, reporting, and documentation tasks</li> <li>Participate in workshops, mentoring sessions, and knowledge-sharing activities</li> <li>Support technology adoption, user engagement, and continuous improvement initiatives</li> <li>Develop an understanding of oil and gas business processes and the technologies that support them</li> <li>Demonstrate commitment to HSE standards, company policies, and professional conduct at all times</li> </ul> <h4>What we are looking for</h4> <p>We are recruiting on potential, not experience. The following attributes define the candidate we want:</p> <ul> <li>Strong written and verbal communication skills in English</li> <li>Positive, professional attitude with high levels of motivation and enthusiasm</li> <li>Intellectual curiosity and a genuine desire to learn</li> <li>Strong interpersonal and teamwork capabilities</li> <li>Good organizational and time management skills</li> <li>Ability to adapt to changing priorities in a dynamic field environment</li> <li>Commitment to personal growth and continuous professional development</li> <li>Desire to build a long-term career within Iraq's energy sector</li> </ul> <h4>Qualifications & requirements</h4> <p><strong>Education</strong><br> Bachelor's degree from an accredited institution — recent graduates encouraged to apply<br> Relevant disciplines include: Information Technology, Computer Science, Information Systems, Engineering, Data Science, Business Information Systems, Electronics, Telecommunications, Cyber Security, or Business English / Communications</p> <p><strong>Language</strong><br> English: Good written and verbal communication required<br> Arabic: Native</p> <p><strong>Technical skills</strong><br> Basic familiarity with Microsoft Office 365, computer hardware/software, and digital tools<br> General awareness of IT, data, or cyber security concepts is advantageous — training will be provided</p> <p><strong>Advantageous certifications (not mandatory)</strong><br> Microsoft Fundamentals, ITIL Foundation, Cisco Networking Fundamentals, Cyber Security Fundamentals, Cloud Fundamentals (Azure / AWS), Data Analytics Fundamentals, or any recognized technology certification</p> <h4>Career development</h4> <p>Upon successful completion of the program, associates may progress into specialist roles such as IT Support Specialist, Information Management Specialist, SAP Support Analyst, Cyber Security Analyst, Digital Solutions Coordinator, Data Analyst, Infrastructure Support Engineer, or Applications Support Analyst — aligned to individual aptitude and business requirements.</p></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Location</h4> <p>Iraq - KBR office<br> 28/28 rotation</p> <h4>Job purpose</h4> <p>Define piping design bases, codes, standards, and deliverables to ensure safe, reliable, and cost-effective solutions.<br> Single point of contact for piping deliverables and activities related to piping materials.<br> Interface with client, vendor, and other stakeholders for successful execution of the project.<br> Coordinate with multi-disciplinary teams (process, mechanical, civil, electrical, instrumentation) and vendors to ensure integrated piping systems.<br> Mentor engineers, drive quality, and ensure schedule adherence for piping deliverables across project phases.</p> <h4>Key responsibilities</h4> <ul> <li>Develop and review piping design basis, piping material specifications, datasheets, and technical bid evaluations.</li> <li>Ensure compliance with applicable codes and standards and project-specific requirements.</li> <li>Develop standard deliverables, various datasheets, and requisition packages related to piping.</li> <li>Experience in non-metallic piping (GRE / HDPE) procurement and specifications.</li> <li>Provide in-depth technical support for material selection involving metallic and non-metallic piping systems.</li> <li>Participate in material selection and corrosion review sessions to ensure suitable materials for service conditions.</li> <li>Review and approve technical deliverables (isometrics, P&IDs, BOMs, MOC/Change Notes, design change requests, technical queries).</li> <li>Demonstrated knowledge of material tracking throughout the project cycle.</li> <li>Understand the MOC process and employ effective change management throughout the lifecycle of the project.</li> <li>Contribute to lessons learnt from the project.</li> <li>Report to department manager/lead engineer for the project.</li> </ul> <h4>Experience</h4> <ul> <li>12+ years of experience in concept, FEED and detail engineering and EPCM experience in the oil & gas industry.</li> <li>Experience with Middle East clients like ADNOC, BP, BOC, PDO, Total Energies & Qatar Energies is highly preferred.</li> <li>Familiarity with onshore and offshore facilities and carried out greenfield and brownfield projects.</li> <li>Experience working with multicultural project teams across various project execution centers.</li> <li>Familiarity with international piping codes and standards such as ASME B31.3, ASTM, API, and NACE MR0175/ISO 15156.</li> </ul> <h4>Qualifications</h4> <ul> <li>Master or bachelor of engineering in a related field.</li> <li>Professional membership or relevant certifications (e.g., PE/Chartered Engineer) are a plus.</li> <li>Certification related to piping design or stress analysis is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong background in piping design, engineering, stress analysis, and support design.</li> <li>Proficiency with piping design software and calculation tools (e.g., CAESAR, AutoPIPE and 3D modeling tools).</li> <li>Technical experience to prepare manhours estimation for different types of piping activities and deliverables of different phases of the project like select phase, FEED and execution.</li> <li>Familiarity with codes, standards, regulations and practices applicable to the design and construction of various facilities.</li> <li>Hands-on knowledge of codes and standards relevant to piping.</li> <li>Experience with high-pressure piping, thermal insulation, coatings, and corrosion considerations.</li> <li>Diverse working experience in project management, conceptual, FEED and detailed design, and construction.</li> <li>Knowledge of interdisciplinary work processes, interfaces, and deliverables.</li> <li>Responsible for the training and development of engineers in his/her team.</li> <li>Adherence to company processes and procedures and handle internal and external project audits.</li> <li>Proven experience in vendor qualification, technical bid evaluation, and factory audits.</li> </ul> <h4>Soft skills</h4> <ul> <li><strong>Communication:</strong> Clear, concise communication with technical and non-technical stakeholders.</li> <li><strong>Problem solving:</strong> Proactive identification and mitigation of piping-related risks.</li> <li><strong>Project management:</strong> Planning, scheduling, risk management, and deliverable tracking.</li> <li><strong>Influence & collaboration:</strong> Effective collaboration with clients, vendors, and internal teams.</li> <li><strong>Adaptability:</strong> Comfort in dynamic project environments and changing technical requirements.</li> <li><strong>Attention to detail:</strong> Rigorous approach to reviews, calculations, and documentation.</li> <li><strong>Safety mindset:</strong> Commitment to health, safety, and environment (HSE) standards.</li> <li><strong>Critical thinking:</strong> Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.</li> </ul></p><p></p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p><h4>Instrument & Controls Lead Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>We are looking for an Instrument & Controls (I&C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument & Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&C Engineers as direct reports.</p> <h4>Responsibilities</h4> <ul> <li>Production delivery, optimisation & excellent performance</li> <li>Responsible for day-to-day optimization of I&C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity.</li> <li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed, and managed via operational risk assessment processes.</li> <li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li> <li>Prioritize I&C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li> <li>Actively lead continuous improvement projects involving instrumentation, automation, and control systems; promote continuous improvement philosophy and engage site teams to drive improvement initiatives.</li> </ul> <h4>Qualifications</h4> <ul> <li>Above 10 years experience in oil and gas industry, preferably with international oil companies (direct or contract).</li> <li>Technical degree in engineering or relevant engineering subject.</li> <li>Experience in previous asset engineering or operations engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal, and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – Office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behaviour change management.</li> <li>Not essential but preferable: professional (chartered) engineer.</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Certified professional engineer.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description - Construction supervisor – civil</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Iraqi nationals preferred</strong></p> <p>KBR is looking for a civil construction supervisor for 28/28 rotation to be based in Iraq.</p> <h4>Accountabilities and expectations:</h4> <ul> <li>Single point responsible for the safe execution of the defined work scope in the plant area.</li> <li>Understand and be responsible for managing the site safety rules for the defined plant area.</li> <li>Understand and be responsible for the scope to be executed including all the interfaces and safety requirements.</li> <li>The work scope can be a complete new multi-discipline area or a single discipline scope passing through numerous operational areas. Clear communication and understanding between operations and the construction team is paramount. The scope is managed, controlled and risk assessed by the permit to work.</li> <li>Can be responsible for managing a dedicated contractor workforce in the area or be part of an integrated team managing a combined resourced construction/commissioning team.</li> <li>Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work.</li> <li>Ensure a fully briefed workforce and operational staff including valid permits and risk assessments.</li> <li>Ensure accurate progress reporting of physical scope completion not based on man-hour estimate.</li> <li>Ensure raising technical queries associated with site design/operational changes.</li> <li>Ensure planning mobilization of vendors to ensure minimal non-productive time for these expensive personnel.</li> <li>Responsible for minimizing non-productive time of work execution by ensuring scope preparation is completed before mobilization of main workforce, material is on site, design scopes are approved and understood, surveys have been completed to confirm proposed execution is doable.</li> <li>Timely approval of construction work packs and associated safety certificates as authorized engineer.</li> <li>Participate in joint walk downs of systems for handover to commissioning and operations.</li> <li>Support the commissioning department for functional commissioning.</li> <li>Ensure all action items as stipulated by interface and SIMOPS memoranda of understanding with external entities and internal disciplines.</li> </ul> <h4>Education</h4> <p>Bachelor's or diploma degree, i.e. civil</p> <h4>Experience and skill set</h4> <ul> <li>Minimum 5 years’ experience in oil and gas related projects</li> <li>Minimum 3 years’ experience in oil and gas project delivery in a multi-discipline workforce</li> <li>Strong leadership and team building skills</li> <li>Supervisory experience</li> <li>Fluent English skills</li> </ul></p><p></p>

<p><h4>Job description - Construction supervisor \u2013 civil<\/h4>\n<p><strong>Company:<\/strong> KBR Iraq<br>\nIraqi nationals preferred<\/p>\n<p>KBR is looking for a civil construction supervisor for 28\/28 rotation to be based in Iraq.<\/p>\n<p>\"Belong, connect, grow, with KBR!<br>\nThe KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br>\nKBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.\"<\/p>\n<h4>Accountabilities \/ expectations:<\/h4>\n<ul>\n<li>Single point responsible for the safe execution of the defined work scope in the plant area.<\/li>\n<li>Understand and be responsible for managing the site safety rules for the defined plant area.<\/li>\n<li>Will understand and be responsible for the scope to be executed including all the interfaces and safety requirements.<\/li>\n<li>The work scope can be a complete new multi-discipline area or a single discipline scope passing through numerous operational areas. Clear communication and understanding between operations and the construction team is paramount. The scope is managed, controlled and risk assessed by the permit to work.<\/li>\n<li>Can be responsible for managing a dedicated contractor workforce in the area or be part of an integrated team managing a combined resourced construction\/commissioning team.<\/li>\n<li>Participate in site safety audits regarding work execution, permits, work site standards and workforce knowledge of the work.<\/li>\n<li>Ensure a fully briefed workforce and operational staff including valid permits and risk assessments.<\/li>\n<li>Ensure accurate progress reporting of physical scope completion not based on man-hour estimate.<\/li>\n<li>Ensure raising technical queries associated with site design\/operational changes.<\/li>\n<li>Ensure planning mobilization of vendors to ensure minimal non-productive time (NPT) for these expensive personnel.<\/li>\n<li>Responsible for minimizing NPT of work execution by ensuring scope preparation is completed before mobilization of main workforce, material is on site, design scopes are approved and understood on site, surveys have been completed to confirm proposed execution is doable.<\/li>\n<li>Timely approval of construction work packs and associated safety certificates as authorized engineer (AE).<\/li>\n<li>Participate in joint walk downs of systems for handover to commissioning and operations.<\/li>\n<li>Support to commissioning department for functional commissioning.<\/li>\n<li>Ensure all action items as stipulated by interface and SIMOPs memorandums of understanding (MOUs) with external entities and internal disciplines.<\/li>\n<\/ul>\n<h4>Education<\/h4>\n<p>Bachelor\u2019s or diploma degree, i.e. civil<\/p>\n<h4>Experience and skill set<\/h4>\n<ul>\n<li>Minimum 5 years\u2019 experience in oil and gas related projects<\/li>\n<li>Minimum 3 years\u2019 experience in oil and gas project delivery in a multidiscipline workforce<\/li>\n<li>Strong leadership and team-building skills<\/li>\n<li>Supervisory experience<\/li>\n<li>Fluent English skills<\/li>\n<\/ul><\/p><p><\/p>

<p><h4>Electrical technician</h4> <p>Responsible for study, design, specification and services related to electrical and electronic systems including power generation, transmission and distribution, power systems performance and control, cabling and wiring, lighting, motor control centers, communications systems, cathodic protection, grounding lightning protection, heat tracing, etc.</p> <p>Under direct supervision, evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adaptations and modifications. With additional experience within one functional area, assists in the design of larger and more complex assignments which involve conventional types of plans, investigations and surveys with relatively few complex features for which there are precedents.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in engineering and minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p> <p>Assignments are generally well defined with clearly specified objectives. Assignments usually include one or more of the following:</p> <ul> <li>Design and development</li> <li>Testing of materials</li> <li>Preparation or checking of design calculations and specifications</li> <li>Studies</li> <li>Research investigations</li> <li>Report preparation</li> <li>Other activities of limited scope</li> </ul> <p>Certification as an engineer-in-training is preferred.</p></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The site planning engineer is responsible for developing and managing site planning activities to ensure that the project is completed on time and within budget. This role involves coordinating with multidisciplinary teams during the FEED and design phases, focusing on onshore and brownfield projects. The site planning engineer will play a crucial role in implementing effective planning strategies, ensuring resource optimization, and mitigating risks associated with site operations.</p> <h4>Job responsibilities</h4> <li>Develop and maintain detailed project schedules using suitable project management software.</li> <li>Collaborate with engineering, construction, and procurement teams to assess project requirements and ensure alignment with project scope.</li> <li>Perform risk analysis and assessment to identify potential issues in project execution and propose corrective actions.</li> <li>Monitor project progress and report regularly to senior management and project stakeholders.</li> <li>Facilitate site assessments and prepare relevant reports to support decision-making processes.</li> <li>Ensure compliance with safety regulations and promote a culture of safety on-site.</li> <li>Maintain effective communication with all project stakeholders and foster strong working relationships.</li> <li>Participate in project meetings, providing insights on planning and scheduling aspects.</li> <li>Contribute to continuous improvement efforts by proposing innovative planning solutions and methodologies.</li> <li>Assist in the development of progress reports and other documentation as required by project management.</li> <h4>Functional responsibilities</h4> <li>Implementing site logistics and resource plans, considering workforce and construction equipment requirements.</li> <li>Coordinating with the engineering team to integrate design changes into the project schedule effectively.</li> <li>Evaluating and monitoring subcontractor performance in relation to planning and execution benchmarks.</li> <li>Preparing and analyzing variance reports to identify schedule delays or inefficiencies.</li> <h4>Technical skills</h4> <li>Proficient in project scheduling software (e.g., Primavera P6, MS Project).</li> <li>Strong understanding of project management principles, methodologies, and tools.</li> <li>Familiarity with FEED (Front-End Engineering Design) processes and brownfield project challenges.</li> <li>Ability to read and interpret engineering drawings and specifications.</li> <li>Competent in risk management and mitigation strategies.</li> <h4>Soft skills</h4> <li>Excellent communication and interpersonal skills to work collaboratively with diverse teams.</li> <li>Strong analytical and problem-solving abilities.</li> <li>Proactive attitude and ability to work under tight deadlines and pressure.</li> <li>Strong organizational skills and attention to detail.</li> <h4>Qualification</h4> <p>Must have 10 years of experience in site planning and project controls.</p> <p><strong>Mandatory:</strong></p> <li>Bachelor’s degree in engineering in related field from reputed university.</li> <p><strong>Good to have:</strong></p> <li>Master’s degree in engineering in related field from reputed university.</li> <h4>Work environment</h4> <li>The role will primarily be based on-site in Iraq, requiring a commitment to a dynamic and fast-paced work environment. The position may involve working in varying weather conditions and adhering to local health and safety regulations.</li> <li>Flexibility in working hours may be required to accommodate project demands and deadlines.</li></p><p></p>

<p><h4>Job description</h4> <p><strong>Position:</strong> Lead process engineer<br> <strong>Company:</strong> KBR<br> <strong>Project:</strong> Majnoon<br> <strong>Location:</strong> Basra. 28/28 rotation</p> <p>Belong, connect, grow, with KBR! The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The lead process engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (conceptual studies, front-end design (FEED), and detailed engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p> <h4>Job responsibilities</h4> <ul> <li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of process flow schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li> <li>Own the detailed process engineering deliverables across all design phases, including process flow diagrams, piping & instrumentation diagrams, equipment datasheets, study reports/manuals, etc., ensuring alignment with international standards and project requirements.</li> <li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, hazard analysis reviews, and audits; ensure timely issue resolution and closure.</li> <li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li> <li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li> <li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li> <li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li> <li>Lead the technical supervision of FEED and detailed engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li> <li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li> <li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li> </ul> <h4>Functional responsibilities</h4> <ul> <li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li> <li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li> <li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li> <li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li> <li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li> <li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li> </ul> <h4>Technical skills</h4> <ul> <li>Extensive experience in FEED and detailed engineering design for offshore/onshore greenfield/brownfield projects.</li> <li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li> <li>Strong knowledge of process safety management and hazard analysis techniques.</li> <li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li> <li>Experience with process control systems and instrumentation.</li> </ul> <h4>Soft skills</h4> <ul> <li>Leadership and team management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work collaboratively in a multidisciplinary environment.</li> <li>Problem-solving mindset with a focus on innovation and efficiency.</li> <li>Adaptability to changing project requirements and priorities.</li> </ul> <h4>Qualifications</h4> <ul> <li><strong>Mandatory:</strong> Bachelor’s degree in engineering (chemical, process, or related field).</li> <li><strong>Preferred:</strong> Master’s degree in engineering (chemical, process, or related field) and/or membership of internationally accepted applicable professional institute.</li> <li>10 years of experience in process engineering within engineering contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li> </ul> <h4>Work environment</h4> <p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The reservoir engineer is part of the well reservoir facilities management team in the petroleum engineering department. The primary job purpose is to ensure asset value maximization, development planning and optimization decisions. The incumbent also needs to ensure the optimum recovery of remaining reserves and production within optimal operating envelope.</p> <h4>Duties and responsibilities</h4> <ul> <li>Overview and participate in in-house reservoir studies and provide technical consultation support to internal/external reservoir studies (validation, assess quality of deliverables).</li> <li>Check with the study team on the dynamic simulation model for short, medium and long term production forecasts and design a reservoir management strategy.</li> <li>Support the study team to update the reservoir simulation model for field development plans, depletion planning, forecast and reserves assessment.</li> <li>Daily reservoir production and performance monitoring in order to meet production criteria while adhering to prudent reservoir management plan.</li> <li>Formulate, review and enhance reservoir management and surveillance plans.</li> <li>Evaluate opportunities to improve reservoir ultimate recovery and production targets.</li> <li>Provide support to other groups for well intervention, proposal, data acquisition and reservoir evaluation.</li> <li>Provide technical advice and support on infill, appraisal and development drilling.</li> <li>Get production forecasts from the study team (simulation models and/or other acceptable reservoir engineering techniques).</li> <li>Conduct well and reservoir review, present recommendation to team and stakeholders as required.</li> <li>Ensure a comprehensive range in subsurface uncertainties understanding has been thoroughly evaluated and passed on to develop production forecast, input, assumptions for WPB, STPF/LTPF etc.</li> <li>Ensure integration and consistency between engineering and geological interpretations by close collaboration with the study team and other professionals (production technologist, petrophysicists, geologists, geophysicists, operations and facilities engineers).</li> <li>Evaluate new technologies and applications to the reservoirs to improve ultimate recovery and encourage knowledge sharing amongst peers and colleagues.</li> <li>Mentoring, training, and enhancing capability of less experienced colleagues and junior staff in all aspects of surveillance and reservoir management.</li> </ul> <h4>Qualifications</h4> <p>Degree in petroleum engineering. In-depth knowledge of reservoir management. Experience and good technical knowledge and understanding of reservoir drive mechanisms, stimulation design, well test analysis, decline curve analysis, production forecast and artificial lifts applications. Previously working in a multi-cultural and multi-national team. Knowledge of well completion, intervention, drilling and workover procedures and regulations. Oil and gas wells design and integrity monitoring and management from conceptual and construction until abandonment. Experience in reservoir engineering software: PI, PVTSim, Kappa’s Sapphire and OFM.</p> <h4>Experience</h4> <p>Minimum 10 - 15 years’ experience with an operator with in-depth technical knowledge and capability in reservoir engineering and reservoir studies (water flooding, gas injection etc.). Experience in both clastic and carbonate reservoirs development and recovery strategies. Previously working in a multi-cultural and multi-national team, international experience.</p> <h4>Language proficiency, computer and software skills</h4> <p>Must be able to speak upper intermediate and above English. Arabic is an advantage. Knowledge of Eclipse (basic), Petrel RE, IPSM, OFM. Experience in other petroleum engineering standard software (intermediate): EC, PVTSim, Kappa’s Sapphire or other software is an advantage.</p> <h4>Skills</h4> <ul> <li>Good communication and analytical skills are essential.</li> <li>Eagerness to learn and develop own skills.</li> <li>Strong leadership skills, ability to delegate, and work with minimum supervision.</li> <li>Must have a HSSE driven mindset.</li> <li>The ability to work with people from different cultural backgrounds will be essential.</li> <li>The position will involve working with government, vendors or partner representatives.</li> <li>Experience and good understanding of reservoir development, simulation, stimulation design, well test analysis, decline curve analysis, production forecast and artificial lifts.</li> <li>Knowledge of well completion, intervention and workover procedures and regulations.</li> <li>Experience and knowledge of oil and gas wells integrity monitoring and management from construction until abandonment.</li> <li>Experience in supervising operations of production enhancements, well completion, intervention and workover procedures and regulations.</li> <li>Good diagnostic skills are required to troubleshoot problems.</li> <li>Must be able to communicate at a technical level with various stakeholders including:<br>     - Production technologists/planners: well performance, analysis and well integrity.<br>     - Petroleum engineers: production performance, production forecasts, development planning.<br>     - Finance/commercial department: reporting and forecasting of produced and export volumes.<br>     - Operations & maintenance: system performance and optimization opportunities.<br>     - Metering: metering and mismeasurement issues.</li> </ul></p><p></p>

<p><h4>Instrument supervisor</h4> <p>Responsible for design, specification and services related to control systems including basic process control systems, safety systems, control panels, analyzer systems, telecommunications, field instrumentation, and valves etc. May also be responsible for advanced controls optimization.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria.</p> <p>Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 4 years related experience, with average experience ranging from 6-10 years. Requires sufficient professional experience to assure competence as a fully trained professional. Work requires a broad knowledge of precedents.</p> <p>Also may be responsible for leadership of a functional area on a small project or a segment of a larger project. As the lead, plans, budgets, organizes, coordinates and controls the project and is responsible for employee performance appraisals and for coaching and developing lower level professionals.</p> <p>Certification as a licensed/chartered professional engineer is preferred.</p></p><p></p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p><h4>Job description</h4> <p><strong>Function:</strong> Information Management / IT<br> <strong>Role level:</strong> Technical Team Lead<br> <strong>Location:</strong> Majnoon Project – Site Basra<br> <strong>Primary purpose:</strong> Lead systems support, stability, security, upgrades, troubleshooting and documentation<br> <strong>Reporting:</strong> Data Centre Manager</p> <h4>Preface</h4> <p>This job description outlines the purpose, responsibilities, competencies, experience, certifications, technical skills, and language requirements for the System Team Lead role. The role is designed for a technically experienced leader who can guide system administrators and engineers while maintaining reliable, secure, and efficient IT services.</p> <h4>Professional summary</h4> <p>The System Team Lead leads and mentors system administrators and engineers, ensuring that IT systems remain stable, secure, efficient, and aligned with operational requirements. The role oversees system upgrades, troubleshooting, technical support, documentation, and best-practice adoption. It requires strong hands-on technical capability combined with leadership, planning, communication, and stakeholder coordination skills.</p> <h4>Core competencies</h4> <ul> <li>Team leadership, mentoring, coaching, and development of system administrators and engineers.</li> <li>Strong technical problem-solving and ability to manage complex troubleshooting activities.</li> <li>Operational discipline focused on stability, security, availability, and efficiency of IT systems.</li> <li>Ability to plan, coordinate, and oversee system upgrades, patching, and continuous improvement activities.</li> <li>Strong documentation discipline, including procedures, standards, runbooks, and knowledge sharing.</li> <li>Clear communication with technical teams, business users, vendors, and management stakeholders.</li> <li>Ability to prioritize technical work across incidents, maintenance, projects, and operational support.</li> </ul> <h4>Professional experience</h4> <ul> <li>Extensive experience in systems administration, infrastructure support, or IT engineering roles.</li> <li>Experience leading or mentoring system administrators, engineers, or technical support resources.</li> <li>Proven experience supporting enterprise IT systems in operational or project-based environments.</li> <li>Experience overseeing system upgrades, troubleshooting, incident resolution, and root-cause analysis.</li> <li>Experience developing best practices, technical documentation, procedures, and operational standards.</li> <li>Experience working with internal IT teams, vendors, and wider project stakeholders to maintain service continuity.</li> </ul> <h4>Key responsibilities</h4> <ul> <li><strong>Lead and mentor:</strong> Lead, guide, and mentor system administrators and engineers, supporting team capability, work allocation, and technical discipline.</li> <li><strong>Maintain stability:</strong> Ensure IT systems remain stable, secure, efficient, and available to support business and project operations.</li> <li><strong>Oversee upgrades:</strong> Coordinate system upgrades, patching, maintenance activities, and technical changes in line with operational needs.</li> <li><strong>Troubleshoot issues:</strong> Oversee complex troubleshooting, escalation management, root-cause analysis, and incident resolution.</li> <li><strong>Drive best practice:</strong> Develop, maintain, and promote best practices, technical standards, runbooks, and operational documentation.</li> <li><strong>Support governance:</strong> Contribute to IT governance, reporting, risk reduction, service improvement, and stakeholder communication.</li> </ul> <h4>Certifications</h4> <p>Relevant professional certifications are preferred where aligned to the organisation, technology stack, and project requirements. Examples include:</p> <ul> <li>Microsoft, Linux, VMware, Cisco, cloud, cyber security, or infrastructure-related certifications.</li> <li>ITIL Foundation or equivalent service management certification.</li> <li>Security-related certification such as CompTIA Security+, Microsoft Security, or equivalent is advantageous.</li> </ul> <h4>Technical skills</h4> <ul> <li><strong>Systems administration:</strong> Windows Server, Linux, core infrastructure services, patching, backup, monitoring, and support.</li> <li><strong>Infrastructure operations:</strong> Virtualization, storage, compute, network services, hosting environments, and operational resilience.</li> <li><strong>Security and controls:</strong> Secure configuration, access control, vulnerability remediation, endpoint protection, and compliance support.</li> <li><strong>Troubleshooting:</strong> Incident response, escalation support, root-cause analysis, performance investigation, and service restoration.</li> <li><strong>Upgrades and maintenance:</strong> System upgrades, patch cycles, lifecycle planning, maintenance windows, and technical change coordination.</li> <li><strong>Documentation:</strong> Runbooks, SOPs, standards, technical guides, change records, and knowledge-base material.</li> </ul> <h4>Languages</h4> <p>English language proficiency required for technical documentation, reporting, stakeholder communication, and operational coordination.<br> Arabic language skills are also relevant.</p></p><p></p>