وظائف فترة مسائية - البصره العراق

<p><h4>Job description</h4> <p><strong>Male gym supervisor (IFMS – KBR operated oil & gas site)</strong></p> <p><strong>Contract:</strong> Integrated Facilities Management Services (IFMS)<br> <strong>Employer:</strong> KBR (or KBR-appointed IFMS subcontractor)<br> <strong>Client:</strong> KBR<br> <strong>Location:</strong> Remote / camp-based oil & gas asset<br> <strong>Reporting to:</strong> KBR IFMS FM manager / FM deputy manager</p> <h4>Job purpose</h4> <p>The physical training centre supervisor is responsible for the safe, compliant, and effective management of the physical training and fitness facility under the KBR IFMS contract, ensuring full alignment with:</p> <ul> <li>KBR HSSE management system</li> <li>Applicable local regulatory requirements</li> </ul> <p>The role supports workforce health, wellbeing, and fatigue management while reinforcing IFMS Goal Zero, Life-Saving Rules, and KBR’s Beyond Zero safety culture.</p> <h4>Key responsibilities</h4> <p><strong>1. HSSE leadership & compliance</strong></p> <ul> <li>Demonstrate visible HSSE leadership in line with KBR Zero Harm</li> <li>Ensure strict compliance with: <ul> <li>Life-Saving Rules</li> <li>MFDS Permit to Work (PTW) and isolation requirements (where applicable)</li> <li>KBR and IFMS HSSE procedures</li> </ul> </li> <li>Develop, implement, and maintain: <ul> <li>Risk assessments (RA)</li> <li>Task risk assessments (TRA)</li> <li>Job safety analyses (JSA) for all fitness activities</li> </ul> </li> <li>Ensure emergency preparedness including: <ul> <li>First aid and AED readiness</li> <li>Clear emergency response procedures within the facility</li> </ul> </li> <li>Report and investigate: <ul> <li>Incidents</li> <li>Near misses</li> <li>Unsafe acts and conditions</li> </ul> using KBR approved reporting systems </li> <li>Support and participate in: <ul> <li>HSSE audits</li> <li>Site inspections</li> <li>Assurance and compliance reviews</li> </ul> </li> </ul> <p><strong>2. Facility operations & asset integrity</strong></p> <ul> <li>Manage daily operations of the physical training centre, including: <ul> <li>Gymnasium</li> <li>Functional training spaces</li> <li>Games areas (inside and outside)</li> <li>Stretching and group exercise areas</li> <li>Swimming and sauna areas</li> </ul> </li> <li>Ensure the facility is: <ul> <li>Clean, hygienic, and orderly</li> <li>Safe, ventilated, and fit for purpose</li> <li>Operated within approved capacity</li> </ul> </li> <li>Conduct and record daily, weekly, and monthly equipment inspections</li> <li>Coordinate planned preventive maintenance (PPM) and corrective maintenance through maintenance teams</li> <li>Ensure fitness equipment is certified, serviceable, and used in accordance with manufacturer requirements, including pool maintenance</li> <li>Control access and prevent misuse of equipment</li> </ul> <p><strong>3. Fitness programmes & user safety</strong></p> <ul> <li>Deliver or supervise fitness programmes suitable for: <ul> <li>Shift workers</li> <li>Rotational personnel</li> <li>Physically demanding roles</li> </ul> </li> <li>Conduct mandatory gym inductions for all users</li> <li>Ensure users are briefed on: <ul> <li>Safe exercise techniques</li> <li>Personal responsibility for fitness activities</li> </ul> </li> <li>Support injury prevention, mobility, and fatigue management initiatives</li> <li>Coordinate with: <ul> <li>Site ISOS medical team</li> <li>KBR HSSE team</li> </ul> for wellness, rehabilitation, or return-to-work support </li> </ul> <p><strong>4. Supervision & IFMS administration</strong></p> <ul> <li>Supervise gym attendants, fitness instructors, or subcontracted staff (if applicable)</li> <li>Enforce discipline, behavioral standards, and professional conduct aligned with: <ul> <li>KBR code of conduct</li> <li>KBR values and ethics</li> </ul> </li> <li>Maintain accurate records for: <ul> <li>User inductions</li> <li>Attendance</li> <li>Equipment inspections</li> <li>HSSE documentation</li> </ul> </li> <li>Provide input to monthly IFMS reports and KPIs including: <ul> <li>Facility utilization</li> <li>HSSE observations</li> <li>Incidents / near misses</li> <li>Equipment availability</li> </ul> </li> <li>Deliver toolbox talks and participate in KBR HSSE meetings as required</li> <li>Prepare fitness programs, welfare event calendars, and manage sports events</li> </ul> <p><strong>5. Client & stakeholder interface</strong></p> <ul> <li>Act as the primary interface for fitness facility matters between: <ul> <li>KBR IFMS staff</li> <li>KBR HSSE and site services providers</li> <li>Site medical team</li> </ul> </li> <li>Address client observations, workforce feedback, and corrective actions</li> <li>Support field wellbeing campaigns and continuous improvement initiatives</li> <li>Represent KBR IFMS in a professional and client-focused manner at all times</li> </ul> <h4>Qualifications & certifications</h4> <p><strong>Essential</strong></p> <ul> <li>Formal qualification in: <ul> <li>Physical training</li> <li>Sports science</li> <li>Physical education</li> <li>Fitness instruction</li> </ul> </li> <li>Certified fitness instructor / personal trainer</li> <li>Valid first aid, CPR, and AED certification or medical experience</li> </ul> <p><strong>Desirable</strong></p> <ul> <li>NEBOSH IGC / IOSH Managing Safely or equivalent</li> <li>Experience working under KBR IFMS contracts</li> <li>Prior experience on Majnoon or IOC operated sites</li> <li>Mental health or wellbeing programme awareness</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 3–5 years’ experience supervising a fitness or training facility</li> <li>Experience in remote, industrial, or high-risk environments</li> <li>Oil & gas, EPC, EPCM, or construction camp experience preferred</li> </ul> <h4>Competencies & behaviours</h4> <ul> <li>Strong HSSE awareness with proactive hazard identification</li> <li>Demonstrates Shell and KBR safety leadership behaviours</li> <li>High personal integrity and professionalism</li> <li>Effective communicator with multicultural teams</li> <li>Organised, resilient, and capable of working independently</li> <li>Physically fit and able to safely demonstrate training techniques</li> </ul> <h4>Working conditions</h4> <ul> <li>Remote onshore oil & gas location</li> <li>Rotational schedule (e.g. 28/28)</li> <li>Camp accommodation</li> <li>Hot and dusty environmental conditions</li> <li>Flexible hours to support shift patterns</li> </ul> <h4>HSSE & performance expectations</h4> <ul> <li>Zero harm mindset</li> <li>Full compliance with: <ul> <li>KBR HSSE management system</li> <li>IFMS contract obligations</li> </ul> </li> <li>Immediate intervention for unsafe acts or conditions</li> <li>Continuous improvement focus</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>Female physical training centre supervisor (IFMS – KBR operated oil & gas site)</p> <p><strong>Job title</strong><br> Physical training centre supervisor</p> <p><strong>Contract</strong><br> Integrated facilities management services (IFMS)</p> <p><strong>Employer</strong><br> KBR (or KBR appointed IFMS subcontractor)</p> <p><strong>Client</strong><br> Shell</p> <p><strong>Location</strong><br> Remote / camp based oil & gas asset</p> <p><strong>Reporting to</strong><br> KBR IFMS FM manager / FM deputy manager</p> <p><strong>Job purpose</strong><br> The physical training centre supervisor is responsible for the safe, compliant, and effective management of the female physical training and fitness facility under the KBR IFMS contract, ensuring full alignment with:</p> <ul> <li>KBR HSSE management system</li> <li>Applicable local regulatory requirements</li> </ul> <p>The role supports workforce health, wellbeing, and fatigue management while reinforcing IFMS Goal Zero, Life-Saving Rules, and KBR’s Beyond Zero safety culture.</p> <h4>Key responsibilities</h4> <p><strong>1. HSSE leadership & compliance</strong></p> <ul> <li>Demonstrate visible HSSE leadership in line with KBR Zero Harm</li> <li>Ensure strict compliance with Life-Saving Rules, MFDS Permit to Work (PTW) and isolation requirements (where applicable), KBR and IFMS HSSE procedures</li> <li>Develop, implement, and maintain risk assessments (RA), task risk assessments (TRA), and job safety analyses (JSA) for all fitness activities</li> <li>Ensure emergency preparedness including first aid and AED readiness, clear emergency response procedures within the facility</li> <li>Report and investigate incidents, near misses, unsafe acts and conditions using KBR approved reporting systems</li> <li>Support and participate in HSSE audits, site inspections, assurance and compliance reviews</li> </ul> <p><strong>2. Facility operations & asset integrity</strong></p> <ul> <li>Manage daily operations of the physical training centre, including gymnasium, functional training spaces, games areas (inside and outside), stretching and group exercise areas, swimming and sauna areas</li> <li>Ensure the facility is clean, hygienic, and orderly; safe, ventilated, and fit for purpose; operated within approved capacity</li> <li>Conduct and record daily, weekly, and monthly equipment inspections</li> <li>Coordinate planned preventive maintenance (PPM) and corrective maintenance through maintenance teams</li> <li>Ensure fitness equipment is certified, serviceable, and used in accordance with manufacturer requirements, including pool maintenance</li> <li>Control access and prevent misuse of equipment</li> </ul> <p><strong>3. Fitness programmes & user safety</strong></p> <ul> <li>Deliver or supervise fitness programmes suitable for shift workers, rotational personnel, and physically demanding roles</li> <li>Conduct mandatory gym inductions for all users</li> <li>Ensure users are briefed on safe exercise techniques and personal responsibility for fitness activities</li> <li>Support injury prevention, mobility, and fatigue management initiatives</li> <li>Coordinate with site ISOS medical team and KBR HSSE team for wellness, rehabilitation, or return-to-work support</li> </ul> <p><strong>4. Supervision & IFMS administration</strong></p> <ul> <li>Supervise gym attendants, fitness instructors, or subcontracted staff (if applicable)</li> <li>Enforce discipline, behavioral standards, and professional conduct aligned with KBR Code of Conduct and KBR Values and Ethics</li> <li>Maintain accurate records for user inductions, attendance, equipment inspections, and HSSE documentation</li> <li>Provide input to monthly IFMS reports and KPIs including facility utilization, HSSE observations, incidents / near misses, and equipment availability</li> <li>Deliver toolbox talks and participate in KBR HSSE meetings as required</li> <li>Prepare fitness programs, welfare event calendars, and manage sports events</li> </ul> <p><strong>5. Client & stakeholder interface</strong></p> <ul> <li>Act as the primary interface for fitness facility matters between KBR IFMS staff, KBR HSSE and site services providers, and site medical team</li> <li>Address client observations, workforce feedback, and corrective actions</li> <li>Support field wellbeing campaigns and continuous improvement initiatives</li> <li>Represent KBR IFMS in a professional and client-focused manner at all times</li> </ul> <h4>Qualifications & certifications</h4> <p><strong>Essential</strong></p> <ul> <li>Formal qualification in physical training, sports science, physical education, or fitness instruction</li> <li>Certified fitness instructor / personal trainer</li> <li>Valid first aid, CPR, and AED certification or medical experience</li> </ul> <p><strong>Desirable</strong></p> <ul> <li>NEBOSH IGC / IOSH Managing Safely or equivalent</li> <li>Experience working under KBR IFMS contracts</li> <li>Prior experience on Majnoon or IOC operated sites</li> <li>Mental health or wellbeing programme awareness</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 3–5 years’ experience supervising a fitness or training facility</li> <li>Experience in remote, industrial, or high-risk environments</li> <li>Oil & gas, EPC, EPCM, or construction camp experience preferred</li> </ul> <h4>Competencies & behaviors</h4> <ul> <li>Strong HSSE awareness with proactive hazard identification</li> <li>Demonstrates Shell and KBR safety leadership behaviours</li> <li>High personal integrity and professionalism</li> <li>Effective communicator with multicultural teams</li> <li>Organised, resilient, and capable of working independently</li> <li>Physically fit and able to safely demonstrate training techniques</li> </ul> <h4>Working conditions</h4> <ul> <li>Remote onshore oil & gas location</li> <li>Rotational schedule (e.g. 28/28)</li> <li>Camp accommodation</li> <li>Hot and dusty environmental conditions</li> <li>Flexible hours to support shift patterns</li> </ul> <h4>HSSE & performance expectations</h4> <ul> <li>Zero harm mindset</li> <li>Full compliance with KBR HSSE management system and IFMS contract obligations</li> <li>Immediate intervention for unsafe acts or conditions</li> <li>Continuous improvement focus</li> </ul></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Field operator (commissioning/startup/operation)</h4> <p><strong>Location:</strong> Basra, Iraq. 28/28 rotation</p> <h4>Role overview</h4> <p>Responsible for monitoring activities across the facility to ensure safe and efficient operation.</p> <h4>Job description</h4> <ul> <li>Leak testing of process and utility systems.</li> <li>Involvement in loop and C&E checks.</li> <li>Commissioning and trial run activities.</li> <li>Lining up and isolation of valves and systems according to startup/shutdown list.</li> <li>Patrolling and monitoring the field for any abnormalities of rotating and static equipment.</li> <li>Monitoring overall parameters.</li> <li>Startup and shutdown activities.</li> <li>Field operations and maintenance activities.</li> <li>Maintaining field log sheet.</li> <li>Communication with DCS operator throughout shift.</li> <li>Manpower handling and focal point for field housekeeping.</li> <li>Maintaining field records.</li> <li>Preparation of daily reports and monthly reports.</li> <li>Maintaining documentation (isolation and de-isolation LOTO).</li> <li>Support other disciplines for the maintenance activities for isolation and de-isolation.</li> <li>PTW handling including manpower and equipment safety.</li> <li>Safe operation of the plant.</li> <li>Ensure that all safety precautions are in place.</li> <li>Emergency response.</li> <li>Carry out any other related duties as and when directed by the supervisor.</li> </ul></p><p></p>

<p><h4>Overview</h4> <p>As operations advisor, you will play a critical role in leading safe and compliant operations at site. You’ll act as the key interface between the ROO operations team and field activities, with a strong focus on coaching, safety leadership, and operational discipline. Your ability to influence and support local teams will be essential in ensuring reliable performance and national workforce development.</p> <h4>Key responsibilities</h4> <strong>Leadership</strong><br> <p>Lead by promoting a strong safety culture, guiding daily safe production, managing incidents with root cause analysis, and coaching direct reports to support nationalisation and development plans.</p> <strong>Risk/Operating discipline</strong><br> <p>Ensure strict risk management and operating discipline by overseeing management of change, engineering queries, operational risk assessments, plant handover, control of work compliance, incident reporting, and exercising stop-work authority to maintain safety and operational integrity.</p> <strong>People</strong><br> <p>Lead by example to promote ROO values, develop and coach national staff, ensure HR compliance, motivate the team, manage performance rigorously, and escalate any unresolved issues through proper channels.</p> <strong>Production delivery, optimisation & excellent performance</strong><br> <p>Oversee daily plant and well performance to maximize production, support optimization and maintenance planning, lead root cause analyses, manage vulnerabilities, drive continuous improvement, ensure operations stay within design limits, contribute to scheduling and project support, identify defects, and fulfil reporting obligations.</p> <h4>Experience, qualifications & key skills</h4> <ul> <li>Minimum 10 years’ hydrocarbon operations experience</li> <li>Including 5+ years in supervisory roles</li> <li>Strong HSE knowledge and mastery of control of work systems</li> <li>Excellent interpersonal skills for coaching and leadership</li> <li>Proven ability to work independently with integrity</li> <li>Ongoing professional development</li> <li>Experience in diverse, multicultural teams preferred</li> </ul> <h4>Interfaces</h4> <p>Interfaces with BOC site leadership, ROO operations line, operations coordinator, site maintenance advisor, permit and area authorities, ROO control of work team, and cross-functional ROO teams (TAR, projects, engineering) for integrated planning.</p> <h4>Procedures and processes</h4> <p>The OA must have in-depth knowledge of key ROO procedures, including control of work (ORA, LO/LC, SORA), MOC/EQ process, work management and activity planning, risk management, PSSR, GOC, and SOPs.</p> <h4>Summary of decision rights</h4> <p>The OA has authority to stop work for safety, prioritize tasks, decide on the 2-week schedule, recommend ops coordinator development, and manage permits and SIMOPS coordination.</p> <h4>Behaviours</h4> <ul> <li>Safety-focused leader who coaches teams to reinforce ROO values</li> <li>Makes risk-aware decisions prioritizing high-impact work</li> <li>Provides proactive technical guidance</li> <li>Supports teams with clear direction and feedback</li> <li>Fosters cross-functional collaboration to achieve shared goals</li> </ul> <h4>Meetings to attend</h4> <p>Regularly attends and contributes to key daily, weekly, and ad hoc meetings including operations & maintenance reviews, CoW meetings (as chair), schedule planning, and TAR/project coordination to ensure alignment, readiness, and safe execution of site activities.</p> <h4>KPI’s</h4> <p>The OA is expected to achieve full compliance with key performance indicators including HSE targets, plant reliability, operational routines, override management, SOP adherence, nationalisation plan delivery, and accurate process safety incident reporting, while actively contributing to broader team goals.</p> <h4>Softwares & apps</h4> <p>The OA is expected to be a proficient user of key operational and reporting systems including Worksafe, Maximo, PI Vision, Power BI, Sharepoint, Sharecat, PMCS, FMD, and GIS.</p> <h4>Routine tasks</h4> <ul> <li><strong>Daily:</strong> Oversee plant performance, manage overrides, support safe production, and ensure CoW and ops discipline.</li> <li><strong>Weekly:</strong> Coach team, review execution, support planning, and drive improvements.</li> <li><strong>Monthly:</strong> Manage alarms with engineering and contribute to forward planning.</li> <li><strong>Ad hoc:</strong> Join project meetings and support readiness and operational alignment.</li> </ul> <h4>About BP and ROO</h4> <p>Rumaila is one of the world’s greatest super-giant oilfields – those that contain over a billion barrels of recoverable oil. It is estimated that some 17 billion barrels of recoverable oil are still contained within Rumaila’s reservoirs.</p> <p>The field is located 50km to the west of the city of Basra, southern Iraq. The Basra region is home to all six of Iraq’s ports, including the deep-water facility at Umm Qasr.</p> <p>Rumaila encompasses a vast area of 1,600 square kilometres, extending approximately 80km north to south and 20km west to east, with the main anticline consisting of two domes, South Rumaila and North Rumaila.</p> <p>Rumaila is part of the Iraq Basra Oil Company (BOC) family of oilfields. It is the largest producing field in Iraq, responsible for producing over 33% of Iraq’s oil. Oil has been produced at Rumaila for well over 50 years. A technical service contract signed in 2009 and extended in 2014, between BOC and BP, Petro-China and the State Oil Marketing Organization (SOMO) is now driving the transformation of Rumaila into a sustainable world-class oilfield for Iraq and its people. This 25 year contract (to 2034) has laid the foundation for the long-term renewal of the field.</p> <p>This demands significant investment in infrastructure, technology and people. Progress is already visible and the oilfield is returning to full efficiency. Average daily production has increased by over 40% since mid-2009. World-class training and safety standards have been introduced. Around 7,000 people work at Rumaila and over 22,000 contractors support Rumaila’s activities through a large supply chain. The vast majority of these people are Iraqi.</p> <p>The next stage of Rumaila’s development is to access previously untapped reservoirs to extend the life of the field and deliver increased production.</p> <p>Our people are key to all of this. We are aiming to create an exemplary record for safety. We are building skills and capabilities. We are developing a culture built on respect for each other, with an ethos to behave responsibly in everything we do – be that in our corporate governance or in the way we safeguard our environment. This is how we will build a reputation as a great place to work and with whom to do business. Most importantly we want to ensure we are a good neighbour to the people and communities.</p> <p>Working together as one team under the technical service contract, the Basra Oil Company (BOC) and the State Oil Marketing Organisation (SOMO) along with contractors, BP and PetroChina, bring a range of different expertise and skills in modernizing this supergiant field.</p></p><p></p>

<p><h4>Overview</h4> <p>As operations advisor, you will play a critical role in leading safe and compliant operations at site. You’ll act as the key interface between the ROO operations team and field activities, with a strong focus on coaching, safety leadership, and operational discipline. Your ability to influence and support local teams will be essential in ensuring reliable performance and national workforce development.</p> <h4>Key responsibilities</h4> <p><strong>Leadership</strong><br> Lead by promoting a strong safety culture, guiding daily safe production, managing incidents with root cause analysis, and coaching direct reports to support nationalisation and development plans.</p> <p><strong>Risk / Operating discipline</strong><br> Ensure strict risk management and operating discipline by overseeing management of change, engineering queries, operational risk assessments, plant handover, control of work compliance, incident reporting, and exercising stop-work authority to maintain safety and operational integrity.</p> <p><strong>People</strong><br> Lead by example to promote ROO values, develop and coach national staff, ensure HR compliance, motivate the team, manage performance rigorously, and escalate any unresolved issues through proper channels.</p> <p><strong>Production delivery, optimisation & excellent performance</strong><br> Oversee daily plant and well performance to maximize production, support optimization and maintenance planning, lead root cause analyses, manage vulnerabilities, drive continuous improvement, ensure operations stay within design limits, contribute to scheduling and project support, identify defects, and fulfil reporting obligations.</p> <h4>Experience, qualifications & key skills</h4> <ul> <li>Minimum 10 years’ hydrocarbon operations experience</li> <li>Including 5+ years in supervisory roles</li> <li>Strong HSE knowledge and mastery of control of work systems</li> <li>Excellent interpersonal skills for coaching and leadership</li> <li>Proven ability to work independently with integrity</li> <li>Ongoing professional development</li> <li>Experience in diverse, multicultural teams preferred</li> </ul> <h4>Interfaces</h4> <p>Interfaces with BOC site leadership, ROO operations line, operations coordinator, site maintenance advisor, permit and area authorities, ROO control of work team, and cross-functional ROO teams (TAR, projects, engineering) for integrated planning.</p> <h4>Procedures and processes</h4> <p>The OA must have in-depth knowledge of key ROO procedures, including control of work (ORA, LO/LC, SORA), MOC/EQ process, work management and activity planning, risk management, PSSR, GOC, and SOPs.</p> <h4>Summary of decision rights</h4> <p>The OA has authority to stop work for safety, prioritize tasks, decide on the 2-week schedule, recommend ops coordinator development, and manage permits and SIMOPS coordination.</p> <h4>Behaviours</h4> <ul> <li>Safety-focused leader who coaches teams to reinforce ROO values</li> <li>Makes risk-aware decisions prioritizing high-impact work</li> <li>Provides proactive technical guidance</li> <li>Supports teams with clear direction and feedback</li> <li>Fosters cross-functional collaboration to achieve shared goals</li> </ul> <h4>Meetings to attend</h4> <p>Regularly attends and contributes to key daily, weekly, and ad hoc meetings including operations & maintenance reviews, CoW meetings (as chair), schedule planning, and TAR/project coordination to ensure alignment, readiness, and safe execution of site activities.</p> <h4>KPI’s</h4> <p>The OA is expected to achieve full compliance with key performance indicators including HSE targets, plant reliability, operational routines, override management, SOP adherence, nationalisation plan delivery, and accurate process safety incident reporting, while actively contributing to broader team goals.</p> <h4>Softwares & apps</h4> <p>The OA is expected to be a proficient user of key operational and reporting systems including Worksafe, Maximo, PI Vision, Power BI, Sharepoint, Sharecat, PMCS, FMD, and GIS.</p> <h4>Routine tasks</h4> <ul> <li>Daily: Oversee plant performance, manage overrides, support safe production, and ensure CoW and ops discipline</li> <li>Weekly: Coach team, review execution, support planning, and drive improvements</li> <li>Monthly: Manage alarms with engineering and contribute to forward planning</li> <li>Ad hoc: Join project meetings and support readiness and operational alignment</li> </ul> <h4>About BP and ROO</h4> <p>Rumaila is one of the world’s greatest super-giant oilfields – those that contain over a billion barrels of recoverable oil. It is estimated that some 17 billion barrels of recoverable oil are still contained within Rumaila’s reservoirs.</p> <p>The field is located 50km to the west of the city of Basra, southern Iraq. The Basra region is home to all six of Iraq’s ports, including the deep-water facility at Umm Qasr.</p> <p>Rumaila encompasses a vast area of 1,600 square kilometres, extending approximately 80km north to south and 20km west to east, with the main anticline consisting of two domes, South Rumaila and North Rumaila.</p> <p>Rumaila is part of the Iraq Basra Oil Company (BOC) family of oilfields. It is the largest producing field in Iraq, responsible for producing over 33% of Iraq’s oil. Oil has been produced at Rumaila for well over 50 years. A technical service contract signed in 2009 and extended in 2014, between BOC and BP, Petro-China and the State Oil Marketing Organization (SOMO) is now driving the transformation of Rumaila into a sustainable world-class oilfield for Iraq and its people. This 25 year contract (to 2034) has laid the foundation for the long-term renewal of the field.</p> <p>This demands significant investment in infrastructure, technology and people. Progress is already visible and the oilfield is returning to full efficiency. Average daily production has increased by over 40% since mid-2009. World-class training and safety standards have been introduced. Around 7,000 people work at Rumaila and over 22,000 contractors support Rumaila’s activities through a large supply chain. The vast majority of these people are Iraqi.</p> <p>The next stage of Rumaila’s development is to access previously untapped reservoirs to extend the life of the field and deliver increased production.</p> <p>Our people are key to all of this. We are aiming to create an exemplary record for safety. We are building skills and capabilities. We are developing a culture built on respect for each other, with an ethos to behave responsibly in everything we do – be that in our corporate governance or in the way we safeguard our environment. This is how we will build a reputation as a great place to work and with whom to do business. Most importantly we want to ensure we are a good neighbour to the people and communities.</p> <p>Working together as one team under the technical service contract, the Basra Oil Company (BOC) and the State Oil Marketing Organisation (SOMO) along with contractors, BP and PetroChina, bring a range of different expertise and skills in modernizing this supergiant field.</p></p><p></p>

<p>Responsible for the development, execution of the communications strategy (SOP) and the management of the operations communications team. Management of the Tetra (client) communication system. Liaison between Client departments such as IT, ROOHSE Land Transport, GIS. Responsible for planning, organising and supervising the work of subordinates in the installation, modifications and testing of telecommunications systems. Involved in planning, developing and constructing of new telecommunications sites and buildings in support of client activities. Responsible for overseeing the work conducted by CONTRACTOR technicians and coordinators who are required to install, maintain operations inside/outside the field. Responsible for travelling to sites located inside/outside the field to install and maintain communication related equipment. Responsible for repairing and maintaining of associated equipment s of the telecommunications system in the support of client operations. Conduct emergency call outs and perform emergency evaluation and repair of the communication systems as directed by client. Prepare information relating to tenders for equipment as requested by client. Responsible for analyzing and troubleshooting communications systems to maintain mobile and static operations in support of project activities. Manage and coordinate all communications and secure field location requirements in support of client operations. Ensures all rotation planning, general leave, sick/compassionate leave and administration arrangements are coordinated to best ensure contractual compliance. Ensures training and personnel records are maintained for all communications staff. Support client Security Department with the technical development and delivery of client training courses.</p><p><strong>Desired Candidate Profile</strong></p><p>8 years cumulative military/police service or equivalent commercial security and risk management experience. 3 years previous experience of working in Iraq for a MOI registered PSC. 3 years communications management experience. Demonstrated competence in technical telecommunications role. Proficient with HF, VHF, Satellite, Internet/Voice over Internet systems, GPS and Transponder communication systems including IVMS In Vehicle monitoring systems. Native English Speaker. Experience in equipment management skills, development and implementation of equipment management programmes. HSE certificate (IOSH).</p>

<p>The Construction Manager is responsible for the complete administration and organization of construction and field personnel and directs the field effort through the activities of his staff. He reports directly to the Project Manager. Contributes to Construction Safety by reducing site exposure through modularization, standardization and maximizing off plot construction. Contributes in the development of brownfield construction strategies and planning initiatives for project opportunities pre FID. Focusses on addressing and removing hurdles to efficient construction and actively monitors productivity on site, advising (acting on behalf of) the construction manager of ways to improve the productivity metrics. Identifies and monitors brownfield construction planning initiatives for approved projects post FID. Will input into enhancing the design, contracting strategy and execution planning all in consideration of constructability through input into HSE, cost, schedule and quality. Acts as the Construction interface from the point of project inception to the point the project starts field execution. Ability to effectively work on more than one project at a time. Accountabilities/ Expectations : Coordinate with Project Engineer and EPCM Construction Management Team to bring a coordinated approach to the overall project scope, quality, cost and schedule expectations. Ensure that planning of the project deliverables from Engineering and Contracts &amp; Procurement is line with the construction sequence and further to the hand over sequence. Ensures designs make optimal use of cold work, modularization and off plots construction to minimize HSSE exposure on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Skills are typically acquired through completion of an undergraduate degree in architecture, engineering, or business administration, preferred Engineering branches., i.e. Mechanical, Civil, electrical, chemical, or equivalent. 5 years of experience in project management which includes experience in facility construction or remodeling and management experience. Preferred Experience: Minimum 15 years experience in Oil and Gas related project Design and Engineering Minimum 10 years experience in Oil and Gas Project Delivery as a Umbrella Contract Construction Manager function in a discipline Workforce Experience in Productivity measurement resource based planning (Level 4 Scheduling) Strong Managerership and teambuilding skills Supervisory experience</p>

<p><h4>Professional summary</h4> <p>Experienced cyber security manager with over 10 years of expertise in the oil and gas industry, including hands-on oil field operations and deployment of Chinese technology solutions. Proven track record of securing complex industrial environments, leading cross-functional teams, and ensuring regulatory compliance. Adept at risk assessment, incident response, and implementation of robust security protocols in challenging operational settings.</p> <h4>Key skills</h4> <ul> <li>Cyber security strategy & management</li> <li>Oil & gas industry operations</li> <li>Oil field security solutions</li> <li>Chinese technology integration & compliance</li> <li>Industrial control systems (ICS) security</li> <li>SCADA systems protection</li> <li>Risk assessment & mitigation</li> <li>Incident response & forensics</li> <li>Regulatory compliance (NIST, ISO, IEC)</li> <li>Team leadership & training</li> <li>Vendor management and liaison</li> <li>Network & endpoint security</li> <li>Cloud security (if applicable)</li> </ul> <h4>Responsibilities</h4> <ul> <li>Lead cyber security operations for oil and gas facilities, including remote oil fields and refineries.</li> <li>Develop and implement security policies tailored to industrial environments and field operations.</li> <li>Oversee the integration and secure deployment of Chinese technology solutions (e.g., Huawei, Hikvision) within operational networks.</li> <li>Conduct risk assessments for both IT and OT environments, identifying vulnerabilities specific to oil field equipment and Chinese tech interfaces.</li> <li>Coordinate incident response plans and forensic investigations for security breaches in field sites.</li> <li>Manage compliance with international standards (NIST, ISO, IEC) and local regulatory requirements.</li> <li>Train and mentor cross-functional teams on cyber security awareness and best practices.</li> <li>Collaborate with vendors and technology partners, including Chinese tech providers, to ensure secure implementation and ongoing maintenance.</li> <li>Awareness “WeChat” – Chinese WhatsApp</li> <li>Cyber-attack methodology – keylogging, backdoor, Trojan attacks etc., including mitigation planning</li> <li>Data loss prevention (DLP)</li> <li>Application attack and defense</li> <li>General risk planning and mitigation</li> <li>Cyber review planning and mitigation</li> <li>Business continuity protection and modeling</li> <li>Liaise with consultant cyber security team</li> </ul> <h4>Education</h4> <p>Degree in Cyber Security / Information Technology / Computer Science</p> <p>Certifications: CISSP, CISM, GICSP, CEH, or relevant oil & gas and Chinese technology certifications</p> <h4>Professional development</h4> <ul> <li>Advanced training in oil & gas cyber security</li> <li>Workshops on Chinese technology integration & security</li> <li>Continuous education in industrial control systems protection</li> </ul> <h4>Languages</h4> <p>English (fluent)<br>Arabic (ideal)</p></p><p></p>

<p>The role This is an exciting opportunity for an experienced Senior Control System Engineer to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region. What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones Role Purpose: Design, configure, test, and commission control and automation systems. Key Responsibilities: Development of control logic (IEC 61131-3) System integration testing and FAT/SAT Configuration of control interfaces (Modbus, Profibus, HART) Support lifecycle maintenance and upgrades Participation in alarm rationalisation and tuning activities</p><p><strong>Desired Candidate Profile</strong></p><p>Expected: Minimum Experience: 10+ years Education: Bachelor s Degree in Engineering PCS and SIS platforms Networking within process control domains HMI and historian integration</p>

<p>The role This is an exciting opportunity for an experienced Control System Engineer to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region. What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones Role Purpose: Design, configure, test, and commission control and automation systems. Key Responsibilities: Development of control logic (IEC 61131-3) System integration testing and FAT/SAT Configuration of control interfaces (Modbus, Profibus, HART) Support lifecycle maintenance and upgrades Participation in alarm rationalisation and tuning activities</p><p><strong>Desired Candidate Profile</strong></p><p>Expected: Minimum Experience: 10+ years Education: Bachelor s Degree in Engineering PCS and SIS platforms Networking within process control domains HMI and historian integration</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, <br> The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. <br> Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. <br> Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. <br> Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. <br> Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. <br> Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. <br> Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. <br> Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. <br> Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. <br> Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. <br> Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</p><p></p></section>

<p>The role</p><p>This is an exciting opportunity for an experienced PTW Coordinator to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region. What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones Job Purpose: Responsible for the daily coordination of the Permit to Work (PTW) system for startup operations. Maintain proper records of all permits and associated certificates raised in connection with operation and facility construction activities. Engage with O &amp; M, Construction &amp; Commissioning teams in the on-site monitoring and auditing of permit to work activities. Key Responsibilities: Awareness of priorities, planning and scheduling of works scopes with responsibility to prepare and review all work permit documentation including JSA s and Site Hazard assessments. Verify permits prior to approval by management team. Identification of plant, equipment, and process isolation requirements within the bounds of the Permit to Work System and in accordance with the O&amp;M Isolation Rules. Liaise with isolating authorities to ensure isolations are implemented Carry out Risk Assessment exercises and direct teams in Toolbox Talks as appropriate. Under direct instruction from O&amp;M Superintendents issue authorized permits. Monitor simultaneous and adjacent work scopes. Resolve of any conflicts between work scopes. Participation in worksite inspections and PTW audits. Ensure that all work permits issued are cross referenced (where applicable) to all interacting activity, and that all concurrent activities are carried out safely. Interface with FOD Operations on Brownfield projects to ensure proper permits are in place and the process is seamless minimizing work delays. Assist with coordination and forward planning to ensure that all permit requirements are pre-planned ready for start of next day's work. Taking a lead role in ensuring the SIMOPS is not compromised by the issue of conflicting permits. Tracks work permits through the entire life cycles from initiation to completion/close-out. Ensure record-keeping requirements are met. Maintains daily permit log, listing permit types issues, location and scope of work. Facilitate and participate in higher level PTW audits.</p><p><strong>Desired Candidate Profile</strong></p><p>Expected: Technical Diploma/ 10 years of Experience, Literate in the use of standard computer software programs. Word, Excel, etc English Communication skills / Team player/ Time-Management / Adaptability / Willingness to learn. Understanding of Oil &amp; Gas Process Operations, HSE practices and application in the field.</p>

<p><br></p> <h3>The role</h3> <p>This is an exciting opportunity for an experienced Construction Site Lead to join our Iraq Business Unit.</p> <h3>Our Clients and Projects</h3> <p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p> <h3>What we can offer</h3> <ul> <li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li> <li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li> <li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li> <li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li> <li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li> <li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li> <li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li> </ul> <h3>Job Objectives:</h3> <p>The Senior Corrosion Engineer will support the delivery of corrosion and materials engineering activities as part of a broader asset integrity management programme for major oil and gas operating assets. The role will be responsible for undertaking corrosion assessments, supporting integrity studies, developing technical deliverables and providing engineering expertise to multidisciplinary teams involved in the operation and maintenance of oil and gas facilities. The successful candidate will work as part of Wood's Iraq team and contribute to the ongoing integrity, reliability and performance of critical production assets.</p> <p>Nationality Requirement: This position is open to Iraqi nationals only .</p> <h3>Core Responsibilities:</h3> <ul> <li>Accountability for a dedicated construction package, leading all phases from planning to execution while ensuring compliance with safety and quality standards.</li> <li>Collaborate with the Project Construction Coordinator to prepare, plan, organize, and execute safely construction activities.</li> <li>Assist in tracking project package progress, identifying and addressing any issues or delays, controlling construction budgets and schedules, quality control, and safety, and providing regular updates to the management.</li> <li>Support in managing and coordinating contractors, subcontractors, and vendors, ensuring adherence to project schedules and specifications, and ensuring timely availability of materials and resources.</li> <li>Anticipate, identify, and resolve construction issues and challenges, applying problem-solving skills to maintain project continuity and efficiency.</li> <li>Ensure all construction works are carried out as per the plans, schedule, specifications, and safety standards.</li> <li>Participate in coordination meetings with internal and external stakeholders when required.</li> <li>Prepare and draft meeting minutes on various topics discussed during projects meetings, ensuring accuracy, and capturing key points for reference and decision-making purposes.</li> <li>Develop and deliver presentations and reports on diverse subjects to communicate project progress, updates, construction feasibility and findings to both management and site personnel, assisting the project construction manager in conveying information effectively.</li> <li>Collaborate with cross-functional teams to gather information and insights, facilitating the preparation of comprehensive reports for management review and decision-making.</li> </ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Engineering, Construction Management, or a related discipline.</p> <p>Minimum 10 to 15 years of experience in the Oil &amp; Gas industry, with significant exposure to construction projects.</p> <p>Strong knowledge of construction processes, techniques, and industry best practices within the Oil &amp; Gas sector.</p> <p>Proven ability to plan, organize, prioritize, and manage multiple activities and interfaces effectively.</p> <p>Excellent communication and interpersonal skills, with the ability to collaborate with a wide range of stakeholders.</p> <p>Strong analytical skills with the ability to review and interpret project plans, specifications, and engineering drawings.</p> <p>High attention to detail and commitment to quality and compliance requirements.</p> <p>Ability to work effectively as part of a multidisciplinary and cross-functional project team.</p> <p>Experience acting as an interface between different technical disciplines, departments, and international teams.</p> <p>Excellent command of the English language, both written and spoken.</p>

<p><h4>Job description</h4> <p><strong>Division:</strong> CSSP (Ratawi Hub – Iraq)<br> <strong>Direction:</strong> PCM</p> <h4>Situation in organization</h4> <p>The Reporting Engineer position is within the Project Control Organization of the project reporting to the Planning & Reporting Manager.</p> <h4>Job dimensions</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics.</p> <p>In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment.</p> <p>The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.</p> <p>Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr.</p> <p>The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process.</p> <p>The budget of the WIP is circa $3 billion.</p> <p>The Reporting Engineer is expected to commence duties in the 3rd quarter of 2026 and will be based in Basra.</p> <h4>Activities</h4> <p><strong>1- Reporting & Analysis</strong><br> <li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.).</li> <li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries.</li> <li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates.</li> <li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li> <li>Ensure consistency and traceability of reporting documentation across all project phases.</li></p> <p><strong>2- HSE & Risk Reporting</strong><br> <li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams.</li> <li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting.</li> <li>Assist in compiling and presenting periodic risk assessments and mitigation tracking.</li></p> <p><strong>3- Systems & Tools</strong><br> <li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports.</li> <li>Ensure data integrity and alignment between planning, cost control, and reporting systems.</li></p> <p><strong>4- Documentation & Compliance</strong><br> <li>Ensure compliance with TotalEnergies, BOC, and project standards for reporting procedures.</li> <li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation.</li> <li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.</li></p> <p><strong>5- Information Management & Digitalization</strong><br> <li>Lead project information management and digitalization activities.</li> <li>Supervise the Information Management Assistant and oversee project information, data, and records management.</li> <li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders.</li> <li>Coordinate information exchange between Company and Contractors.</li> <li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems.</li> <li>Develop and maintain project data repositories, dashboards, and reporting systems.</li></p> <h4>Context and environment</h4> <p>TotalEnergies is acting as contractor to BOC. After the completion of the project, the facilities will be handed over to BOC for operation.</p> <h4>Accountabilities</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision-making across all stakeholders.</p> <h4>Qualifications / Experience required</h4> <li>Degree in engineering, data analytics, or related field.</li> <li>Minimum 5 years of experience in project reporting within large-scale industrial or oil & gas projects.</li> <li>Strong analytical and data visualization skills.</li> <li>Proficiency in reporting tools (Power BI, Excel, Word, PowerPoint, etc.).</li> <li>Experience in information management or project data management.</li> <li>Understanding of data governance and information quality principles.</li> <li>Good communication and organizational skills.</li> <li>Ability to work in a multicultural and high-pressure environment.</li> <li>Experience in engineering/construction commercial or contracts administration role.</li> <li>Ability to listen to and understand the signals and queries from various interlocutors.</li> <li>Languages: English is mandatory; knowledge of French and Arabic is a plus.</li></p><p></p>

<p>Under the overall guidance of the Project Manager and the direct supervision of the Lead Civil Engineer, the Civil Engineer is required to perform the following specific duties and responsibilities ensuring their effectiveness, transparency, and integrity:</p> <p>Plan, supervise, and manage the implementation of rehabilitation and/or construction works, ensuring alignment with project requirements, timelines, and budgets.</p> <p>Responsible for implementation and contributing to the preparation of the bill of quantities, as-built and construction drawings, Specifications and other engineering documents.</p> <p>Responsible for day-to-day site visit of the construction works, coordination with the contractors and suppliers according to the needs and requirements on site; Inspects and report on contractor s works in progress ensuring that the contractor meets client`s quality standards and implement the contract in accordance with the regulations.</p> <p>Provide support and guidance to the contractor and assists in resolving site problems, as necessary; Assist in the preparation of project plans, detailed schedules, and progress reports, and contribute to project closure activities and documentation.</p> <p>Responsible for supervision of site technical staff and consultants assigned to the project, and the assignment and monitoring of duties during the progress of works; Liaise with relevant government authorities, beneficiaries, and stakeholders to facilitate permits, secure approvals, and maintain effective working relationships.</p> <p>Embed sustainability dimensions including social and gender inclusion, as well as Health, Safety, Security, and Environmental (HSSE) aspects into the project during the design and construction phases; Ensure PSEA measures are implemented throughout the project implementation, as per the country PSEA action plan; Perform other related duties as required by the Project Manager.</p> <p>Supervise and monitor contractors setting-out and construction activities, ensuring full compliance with contract specifications, approved work plans, and project requirements in terms of scope, timeline, and budget; Conduct daily site visits to monitor work progress, identify issues, and propose practical engineering solutions in coordination with the Project Manager and Lead Civil Engineer; Responsible for preparation of progress reports on construction activities, according to the agreed timeframe of works and submission of such on a weekly basis to the Project Manager; Assess and report on the project closing plans, archiving of cost and progress report and hand over all related reports to the Project Manager; Evaluate and assess work schedules and programmes, including the comparison with the schedule baselines and reports to the Project Manager accordingly; Check all laboratory reports, operation and maintenance manuals, and keep records and report to the Project Manager accordingly; Assess the work activities of contractor/s, measure completed work, and make recommendations to the Project Manager for progress payments to contractors.</p> <p>Carry out on-site technical inspections and assessments to ensure that all construction activities comply with client`s quality standards and approved project specifications. Maintain accurate records and compile periodic and ad hoc reports in accordance with client`s procedures and reporting requirements.</p> <p>Conduct site inspections, testing, and quantity verification, and review/approve technical submittals including shop drawings, material approvals, and as-built documentation. Maintain records, compile periodic reports and any specific reports required by client`s standard procedures; Responsible for the preparation and verification of a database for the available materials shipped to the project, schedules of labor force, and monitoring of quality of such during the progress of works; Check, verify and approve the interim payments submitted by the Contractor/s and submit detailed reports to the Project Manager.</p> <p>Maintain accurate records of site activities, inspections, incidents and progress, ensuring timely submission of reports (weekly/monthly/quarterly). Support project closure through commissioning, handover and archiving of construction documentation. Assist in compiling periodic and specific reports, and ensure all project documentation is up-to-date and properly filed. Support the Project Team in overseeing change controls, risk and issue registers, and ensure timely and accurate reporting on project progress.</p> <p>Ensure that lessons learned and challenges are documented throughout the project implementation and shared with the project team; Participate in knowledge-sharing initiatives and contributing insights and lessons learned.</p> <p>Project reporting Civil Engineer will be reporting to Lead Civil Engineer and/or Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><h3>Key competencies</h3> <p>A minimum of 2 years of experience in development and coordination within agricultural, water resources , or related projects, particularly in irrigation (Open Channels and Closed Pipe System) and water-related activities, is required. Experience in site supervision, as well as monitoring and evaluation, is required. Experience working on international and/or local projects in conflict-affected areas is preferred. Experience in implementing and delivering projects for international organizations is considered an asset. Experience in report writing, data analysis, and document drafting is desirable. Experience in Health and Safety Management is desirable. Experience in quality assurance and quality control (QA/QC) for infrastructure projects is desirable. Experience working in the southern governorates is desirable.</p> <h3>Team management</h3> <p>This role has no team management</p> <h3>Further information</h3> <p>Disclaimer: At no stage of the recruitment process will CTG ask candidates for a fee. This includes during the application stage, interview, assessment and training. CTG has a zero tolerance to Sexual Exploitation and Abuse (SEA) which is outlined in its Code of Conduct. Protection from SEA is everyone s responsibility CTG encourages all candidates applying for this advertisement to ensure that their candidate profile is up to date with up to date experience / education / contact details, as this will help you being considered further in your application for this role.</p>

<h2>The role</h2><p>This is an exciting opportunity for an experienced QA/QC Lead to join our Iraq Business Unit.</p><h2>Our Clients and Projects</h2><p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><h2>What we can offer</h2><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><h2>Job Objectives:</h2><p>The QA/QC Lead will support the delivery of Quality and materials Inspection activities as part of a broader asset integrity management programme for major oil and gas operating assets. The role will be responsible for undertaking Quality assessments, supporting Quality studies, developing technical deliverables and providing engineering expertise to multidisciplinary teams involved in the operation and maintenance of oil and gas facilities. The successful candidate will work as part of Wood's Iraq team and contribute to the ongoing Quality reliability and performance of critical production assets.</p><h2>Nationality Requirement:</h2><p>This position is open to Iraqi nationals only .</p><h2>Core Responsibilities:</h2><ul><li>Directly supervise and lead QC inspectors and NDT personnel, fostering a collaborative and high-performing team environment. Define individual responsibilities, provide effective training and mentorship, and conduct performance evaluations. Schedule and assign work for efficient workflow and adherence to production schedules.</li><li>Monitoring of all Quality control and surveillance activities for several construction contracts, including planning and implementation by Contractors Quality control plans and Inspection Test Plans.</li><li>Supervise and control the Contractor s to carry out the Quality Control &amp; Surveillance works during prefabrication and under construction to check that the work is in conformity with COMPANY specifications and procedures</li><li>Prepare / Develop Quality Control Procedures as required such as NDT, Inspection, Coating as required in line with TEEPRH</li><li>Coordinate with TPI agencies, Suppliers, other affiliates and discipline for inspection and surveillance monitoring of the Project.</li><li>To supervise and control the Critical activities, such as welding, non-destructive examinations, and performance testing. (Including increased inspection levels when performance requirements are not met)</li><li>To check all the process of the field joint, coating traceability, welding, NDT, hydrotest, SAT till the RFC and FRSU.</li><li>Manage non-conformance reports (NCRs), initiating root cause analysis and driving corrective action implementation.</li><li>Report and Update all Quality issues on site together with a regular and brief description of all non-conformances issued and all related correction, corrective, and preventive actions</li><li>Maintain Quality documentation and records for each area of activity, and system index for all discipline works and each file and records.</li><li>Ensure inspection equipment used in the project are calibrated, and certified by independent, recognized, &amp; accredited testing laboratory as per their manufacturer recommendations</li><li>Ensure the receipt, control, and transmission of all Contractors' documents</li><li>Monitor and trend quality key performance indicators (KPIs) to identify areas for improvement.</li><li>Review and audit the Quality Management System (QMS) to ensure internal and external compliance.</li><li>Assist with complaint resolution and implement corrective and preventive actions (CAPA).</li><li>Participate actively in daily production meetings, providing QC and NDT updates.</li><li>Coordinate equipment calibration and verification, maintaining accurate records.</li><li>Produce detailed reports, presentations, and assignments regularly to a high standard.</li><li>Foster open communication with team members, colleagues, and stakeholders.</li><li>Possess excellent written and verbal communication skills.</li><li>Strong problem-solving and decision-making skills with the ability to think independently.</li><li>Comprehensive knowledge of mechanical and electrical commissioning procedures.</li><li>Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Access) and Adobe Acrobat.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>What makes you remarkable?</h2><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected: Bachelor's Degree in Mechanical Engineering, or related discipline. AMPP/NACE Senior Corrosion Technologist or equivalent preferred. API 571 certification preferred. API 580 certification adventageous.</p>

<p>Wood is recruiting for an HSE Lead to join its Iraq business unit focusing on supporting the delivery of HSE activities as part of a broader asset Safety management program for major oil and gas operating assets. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement.</p><p>The role</p><p>This is an exciting opportunity for an experienced HSE Lead to join our Iraq Business Unit.</p><p>Our Clients and Projects</p><p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><p>Job Objectives:</p><p>The HSE Lead will support the delivery of HSE activities as part of a broader asset Safety management programme for major oil and gas operating assets. The role will be responsible for undertaking HSE assessments, supporting Safety studies, developing technical deliverables and providing engineering expertise to multidisciplinary teams involved in the operation and maintenance of oil and gas facilities. The successful candidate will work as part of Wood's Iraq team and contribute to the ongoing Saftey, reliability and performance of critical production assets.</p><p>Core Responsibilities:</p><ul><li>Review and acceptance of the Contractors HSE plan.</li><li>Ensure the implementation of the Project HSE Management System (plans, procedures and specifications) and Contractual Security Requirements for all aspects of the work.</li><li>Ensure that Operational HSE requirements are fully addressed in all aspects of design and that the design complies with TOTAL HSE Company Rules and General Specifications.</li><li>Maintain a high awareness of industry and professional best practices.</li><li>Provide specialist advice, supports and technical assistance to the Project Manager and Construction Manager on HSE matters.</li><li>Monitor the DBOOM contractor, Pipeline installation contractor and subcontractor s activities to ensure adherence to HSE requirements.</li><li>Review all HSE procedures and follow up their strict implementation on Project scope and work sites.</li><li>Take part to the Permit to Work daily and Toolbox Talks related to work activities.</li><li>Full awareness of SIMOPS dossiers for simultaneous operations between Operations and Project.</li><li>Participate in Job Risk Assessment, request new JRA s, review, propose and ensure adequate risk mitigation measures, in full consideration of site operations.</li><li>Ensure Job Risk Assessment findings are communicated, understood and implemented on site.</li><li>Assist to Site Construction Project team with effective control on site construction yards (e.g., accommodation hygiene, potable water management, handling of chemicals/COSHH, H2S, health surveillance, management of hazardous substances, lifting etc.).</li><li>Assist with supporting the required HSE competencies across the Site Construction Project team: support HSE Superintendent, APLO/SLS with organization trainings of the personnel on site.</li><li>Participate in the preparation of material to enhance awareness on any areas for improvement.</li><li>Ensure implementation of the incident / accident management system (reporting analysis, recommendations, development, of action plans and monitoring implementation.</li><li>Conduct, Coordinate, participate and monitor all HSE audits, reviews, incident and accident investigation, etc.</li><li>Assist with preparation and delivery of bridging documents to support the project teams</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Expected: Bachelor s degree in engineering or construction field. 10 to 15 years of experience in the oil industry, with significant experience in HSE Management. Previous experience under SIMOPS works will be considered as a plus. Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team Kirkuk residency is preferred Fluent in English, Arabic is a plus Personal attributes: The job holder shall be fully accountable and directly responsible for: Organizing frequent site visits and main subcontractors. Full implementation of approved Project HSE Plan and contractual HSE requirements in all activities of the Projects by company team, contractor and subcontractors. Creation of safety and security awareness and promotion of best practices with adequate emphasis on COMPANY Golden Rules. Ensuring adequate training of personnel involved in the work on HSE related matters.</p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description</h4> <h4>Delivery coordinator</h4> <p>28/28 Basra</p> <h4>Overview</h4> <p>The Delivery Coordinator will serve as the primary integrator between the construction and commissioning teams across multiple projects, ensuring smooth and efficient coordination of all interfaces. These projects include, but are not limited to, tie-ins, power projects, oil and gas projects and facilities. The role involves close collaboration with the client's project and operations team to ensure project alignment, successful completion and handover.</p> <h4>Key responsibilities</h4> <ol> <li><strong>Construction & mechanical completion</strong><br> Act as the liaison between the construction and commissioning teams to ensure a seamless transition from mechanical completion to commissioning.<br> Oversee and track the mechanical completion status and ensure all relevant documentation is provided to the commissioning team.<br> Facilitate the timely handover of systems from construction to commissioning, ensuring all pre-commissioning activities are completed as per the agreed schedule.<br> Coordinate construction punch lists and ensure resolution before the systems are handed over for commissioning.<br> Support in resolving construction-related issues that impact commissioning, ensuring these are addressed proactively.</li> <li><strong>Interface management</strong><br> Manage interfaces across various projects, including tie-ins, power projects, and oil and gas operations, ensuring integration and alignment between different teams and systems.<br> Facilitate communication and coordination between the construction, commissioning, and interface teams to ensure all critical paths are tracked and managed effectively.<br> Ensure that all interface-related activities (tie-ins, utilities, etc.) are communicated and planned in coordination with the client's project and operations team.<br> Maintain a comprehensive interface register to track and manage all critical points of interaction between construction and commissioning teams.</li> <li><strong>Commissioning support</strong><br> Work closely with the commissioning team to support requirements for pre-commissioning and commissioning activities in line with schedule.<br> Monitor the readiness of sub-systems, systems and equipment for commissioning, ensuring any potential bottlenecks are communicated and addressed promptly.<br> Ensure that commissioning requirements remain a focus during construction phases in line with schedule requirements to avoid delays or rework during the pre-commissioning and commissioning stages.<br> Support and facilitate start-up readiness and assurance including pre-start-up audits and checks (i.e. TIV, PSSR, SUOP, PSUA, SOF, VCR) where applicable.<br> Support and facilitate communication and coordination with commissioning and operational readiness to ensure a smooth transition through commissioning, ready for start-up (RFSU), start-up and handover; ensuring a collaborated approach with client's project and operations teams.</li> <li><strong>Reporting & communication</strong><br> Provide regular reports on the progress of mechanical completion, interface coordination, and commissioning readiness to both internal teams and external stakeholders.<br> Ensure all stakeholders are updated on any changes in schedules, priorities, or issues impacting construction and commissioning timelines.<br> Develop and maintain strong relationships with company’s project and operations teams to promote a collaborated environment for progress and inclusive problem-solving.</li> <li><strong>Construction risk management</strong><br> Update the construction risk register on a weekly basis or whenever required.<br> Identify potential risks and bottlenecks at the construction-commissioning interface and work with relevant teams to mitigate these risks.<br> Ensure that interface-related issues are escalated and resolved in a timely manner to avoid delays in project completion.</li> </ol> <h4>Key interfaces</h4> <ul> <li>Construction teams</li> <li>Commissioning teams</li> <li>Contractors and subcontractors</li> <li>Clients project and operations teams (BOC & AOS)</li> </ul> <h4>Skills & qualifications</h4> <ul> <li>Strong background in EPCM projects, particularly in oil and gas.</li> <li>Extensive experience in construction and commissioning (12+ years), with an understanding of mechanical completion processes and commissioning.</li> <li>Excellent communication and coordination skills to manage multiple stakeholders.</li> <li>Prior experience working in the Majnoon field and familiarity with the operator (Anton Oil) and client (BOC) is preferred.</li> </ul></p><p></p>