وظائف مهندس تفتيش هندسي - البصره العراق

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p>Experienced ELV Engineer to join our QA/QC department, focusing on quality control for extra-low voltage (ELV) and weak current systems in high-rise tower construction project for the Main Contractor. The ideal candidate should have a strong background in site quality inspections for specialized systems, testing &amp; commissioning experience, and the ability to maintain high professionalism and execution capability under intense work and tight schedules.</p><p>Conduct quality inspections throughout all stages of ELV installation works during construction and post-completion phases. Verify site construction quality and compliance against approved drawings, schematic diagrams, and technical specifications. Identify quality deviations, installation defects, interference risks, and non-conformities; track corrective actions to closure. Supervise material receiving inspections (MIR); ensure compliance with approved material submittals and samples in terms of specification, brand, grade, and certification standards. Lead and participate in pre-commissioning inspections, system testing acceptance, and defect rectification processes. Witness and verify multi-system integration testing. Prepare and maintain punch lists for ELV systems; track the rectification status of each defect with photographic and technical records until closure. Review as-built drawings and O&amp;M manuals for completeness and accuracy; ensure compliance with delivery standards. Coordinate with sub-contractors, specialized system vendors, consultants, and the client to complete final acceptance and handover sign-off processes. Maintain the quality documentation system, including quality inspection plans, checklists, and method statements Prepare daily and weekly quality reports to inform management of quality status and critical issues Manage the material submittal log and document version control; ensure the latest drawings are used on site Coordinate multi-disciplinary interfaces at the field level, specifically managing boundaries between ELV systems, LV power supplies, and Mechanical interfaces (HVAC dampers, fire pumps, elevators, etc.) to resolve technical interface issues during installation. Attend quality coordination meetings; follow up on the timely implementation of preventive and corrective measures on site.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree or higher in Electrical Engineering, Electronics &amp; Communication Engineering, or a related discipline (or equivalent Technical Diploma with extensive experience).</p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This role aims to provide environmental technical support to the MFD. This role has a strong emphasis on environmental compliance and emergency response. Candidates should be recognised for expertise in the environmental function including but not limited to: emissions, disturbed lands remediation, biodiversity, ecological impacts and environmental management system, as well as waste management and minimisation. The environmental function supports company operations, and this person should have a customer-focused and change management mindset.</p> <h4>Duties and responsibilities</h4> <ul> <li>Implementing environmental policies and practices in Majnoon Oilfield development.</li> <li>Devising strategies to meet targets and encourage best practices.</li> <li>Devising the best tools and systems to monitor performance and implement strategies.</li> <li>Ensuring compliance with Iraqi environmental legislation.</li> <li>Assessing, analysing and collating environmental performance data and reporting information to internal staff, clients and regulatory bodies.</li> <li>Responsible for ensuring that the contractors are fully complying with all environmental policies and regulations of the MFD.</li> <li>Responsible for conducting environmental inspections, developing inspection reports, creating SMART actions and follow-up actions to closure, and supporting field environmental survey work.</li> <li>Supporting field environmental survey work.</li> <li>Supporting delivery of the soil and ground water and noise monitoring program.</li> <li>Responsible for air quality monitoring survey.</li> <li>Assessing, analysing, and collating environmental performance data and reporting information to internal staff and clients.</li> <li>Responsible for the complete environmental data analyses and collecting the water and ODS inventories.</li> <li>Supporting completion of all weekly, monthly, quarterly, and annual environmental reports.</li> <li>Analyzing the passive tubes, STPs reading and submitting a comprehensive report.</li> <li>Scheduling and managing the housekeeping campaigns in MFD.</li> <li>Keeping up to date with relevant changes in environmental legislation and initiatives, including international legislation where applicable.</li> <li>Producing educational or information resources for internal staff, clients or the general public.</li> <li>Delivering the annual World Environmental Day event in the field.</li> </ul> <h4>Qualification & training requirements</h4> <ul> <li>BSc in engineering degree or MSc in environment or equivalent.</li> <li>NEBOSH Environmental Management Certificate is preferred.</li> <li>Working knowledge of HSE-related activities and environmental monitoring programs.</li> <li>Certified ISO 45001 and ISO 14001 or equivalent.</li> </ul> <h4>Experience</h4> <ul> <li>Five years of relevant job experience within the oil & gas industry.</li> <li>Knowledge of HSE rules and regulations of the oil industry.</li> <li>Has an awareness of STP sampling and soil and groundwater-related matters.</li> <li>Knowledge in recognizing environmental issues and problems.</li> <li>Knowledge in using the noise handheld equipment.</li> <li>Experience in data managing and reporting.</li> <li>Demonstrable experience in all functional aspects of environmental monitoring programs, including environmental contract of air quality monitoring, soil and groundwater monitoring, noise monitoring program, environmental reports review, AAQMS (ambient air quality system) station managing and maintaining.</li> <li>Minimum of four years of responsible experience related to contaminated site assessment and remediation, environmental risk assessment, environmental field sampling, monitoring, instrumentation, laboratory analyses and data management.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>MS Office: Excel – Intermediate, Word – Intermediate, PowerPoint – Intermediate.</li> <li>English – Intermediate (verbal & written).</li> </ul> <h4>Skills</h4> <ul> <li>IT skills (Excel, PowerPoint, Microsoft Office, SharePoint).</li> <li>Presentation skills and strong reporting skills.</li> <li>Communication skills, teamwork, and stakeholder engagement.</li> <li>A genuine interest in and understanding of environmental issues and relevant legislation.</li> <li>High proficiency with environmental software, e.g. Env Man as part of air quality monitoring and maintenance of environmental monitoring equipment.</li> </ul></p><p></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR!<br> The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>This role aims to provide environmental technical support to the MFD. This role has a strong emphasis on environmental compliance and emergency response. Candidates should be recognised for expertise in the environmental function including but not limited to: emissions, disturbed lands remediation, biodiversity, ecological impacts and environmental management system, as well as waste management and minimisation. The environmental function supports company operations, and this person should have a customer-focused and change management mindset.</p> <h4>Duties and responsibilities</h4> <ul> <li>Implementing environmental policies and practices in Majnoon Oilfield development.</li> <li>Devising strategies to meet targets and encourage best practices.</li> <li>Devising the best tools and systems to monitor performance and implement strategies.</li> <li>Ensuring compliance with Iraqi environmental legislation.</li> <li>Assessing, analysing and collating environmental performance data and reporting information to internal staff, clients and regulatory bodies.</li> <li>Responsible for ensuring that the contractors are fully complying with all environmental policies and regulations of the MFD.</li> <li>Responsible for conducting environmental inspections, developing inspection reports, creating SMART actions and follow-up actions to closure, and supporting field environmental survey work.</li> <li>Supporting field environmental survey work.</li> <li>Supporting delivery of the soil and ground water and noise monitoring program.</li> <li>Responsible for air quality monitoring survey.</li> <li>Assessing, analysing, and collating environmental performance data and reporting information to internal staff and clients.</li> <li>Responsible for the complete environmental data analyses and collecting the water and ODS inventories.</li> <li>Supporting completion of all weekly, monthly, quarterly, and annual environmental reports.</li> <li>Analyzing the passive tubes, STPs reading and submitting a comprehensive report.</li> <li>Scheduling and managing the housekeeping campaigns in MFD.</li> <li>Keeping up to date with relevant changes in environmental legislation and initiatives, including international legislation where applicable.</li> <li>Producing educational or information resources for internal staff, clients or the general public.</li> <li>Delivering the annual World Environmental Day event in the field.</li> </ul> <h4>Qualification & training requirements</h4> <ul> <li>BSc in engineering degree or MSc in environment or equivalent.</li> <li>NEBOSH Environmental Management Certificate is preferred.</li> <li>Working knowledge of HSE-related activities and environmental monitoring programs.</li> <li>Certified ISO 45001 and ISO 14001 or equivalent.</li> </ul> <h4>Experience</h4> <ul> <li>Five years of relevant job experience within the oil & gas industry.</li> <li>Knowledge of HSE rules and regulations of the oil industry.</li> <li>Has an awareness of STP sampling and soil and groundwater-related matters.</li> <li>Knowledge in recognizing environmental issues and problems.</li> <li>Knowledge in using the noise handheld equipment.</li> <li>Experience in data managing and reporting.</li> <li>Demonstrable experience in all functional aspects of environmental monitoring programs, including environmental contract of air quality monitoring, soil and groundwater monitoring, noise monitoring program, environmental reports review, AAQMS (ambient air quality system) station managing and maintaining.</li> <li>Minimum of four years of responsible experience related to contaminated site assessment and remediation, environmental risk assessment, environmental field sampling, monitoring, instrumentation, laboratory analyses and data management.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>MS Office: Excel – Intermediate, Word – Intermediate, PowerPoint – Intermediate.</li> <li>English – Intermediate (verbal & written).</li> </ul> <h4>Skills</h4> <ul> <li>IT skills (Excel, PowerPoint, Microsoft Office, SharePoint).</li> <li>Presentation skills and strong reporting skills.</li> <li>Communication skills, teamwork, and stakeholder engagement.</li> <li>A genuine interest in and understanding of environmental issues and relevant legislation.</li> <li>High proficiency with environmental software, e.g. Env Man as part of air quality monitoring and maintenance of environmental monitoring equipment.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are recruiting for a Site NDT QC Inspector with the following details</p><br><p>Location: Basra, Iraq </p><p>Work Scheme : Rotational 28 days ON and 28 days OFF </p><p>Planned Start Date : Sept 2026 </p><p>Duration : 2 years, extendable </p><br><p>Missions:</p><ul><li><p>The QC NDT Inspector is responsible for supervising, coordinating, and controlling all Non-Destructive Testing (NDT) activities performed by Contractors and Subcontractors within the Project – CPF2 Package. </p></li><li><p>He ensures that all NDT activities are executed in full compliance with project specifications, approved procedures, international codes, and contractual requirements. </p></li><li><p>The position reports directly to the CPF2 Site QC Superintendent and works closely with QC Welding PVV, QC Welding Structural, QC Piping, QC Mechanical, QC Civil/Structural, and Contractor/Subcontractor NDT teams. </p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Minimum 10 years of experience in <strong><u>NDT QC </u></strong>on major Oil &amp; Gas EPC projects.</p></li><li><p>Strong experience with piping, pressure vessels, and structural NDT.</p></li><li><p>Experience on CPF, refinery, or large industrial facilities strongly preferred.</p></li><li><p>Technical competencies:</p></li><li><p>Strong knowledge of NDT methods and acceptance criteria; PCN Level 2/3 certification will be evaluated as a significant asset</p></li><li><p>Strong understanding of ASME, API, AWS, ISO 9712, and project specifications.</p></li><li><p>Ability to interpret NDT reports, weld maps, and technical drawings.</p></li><li><p>Knowledge of weld repair cycles and re-inspection requirements.</p></li><li><p>Understanding of NCR, deviation, and concession processes.</p></li><li><p>Familiarity with digital QC systems (Aconex, SharePoint, SmartPlant, etc.) is a plus.</p></li></ul><p></p></section>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The Construction Supervisor is responsible for overseeing and managing all on-site construction activities, ensuring that projects are executed safely, on schedule, within budget, and in compliance with project specifications, quality standards, and HSE regulations. The role involves supervising construction teams, subcontractors, and day-to-day site operations with a primary focus on flowlines, mechanical works, and piping systems in the oil and gas sector.</p> <h4>HSE activities</h4> <ul> <li>Support and enforce project guidelines and HSE objectives.</li> <li>Attend HSE meetings and training when necessary.</li> <li>Participate in job safety analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.</li> </ul> <h4>Key job responsibilities</h4> <ul> <li>Supervise and coordinate all on-site construction activities related to flowlines, mechanical installations, material and piping systems.</li> <li>Ensure work is carried out in strict compliance with project specifications, engineering drawings, and applicable codes/standards.</li> <li>Monitor daily work progress and report to the Construction Manager on project status, delays, and resource requirements.</li> <li>Manage and supervise construction crews, subcontractors, and vendors to ensure efficient and quality workmanship.</li> <li>Review and interpret P&IDs, isometric drawings, piping layouts, and mechanical installation drawings.</li> <li>Coordinate with engineering, procurement, and quality control teams to resolve technical issues and ensure material availability.</li> <li>Conduct quality inspections on welding, piping fabrication, pressure testing, and mechanical installations.</li> <li>Ensure proper documentation and reporting of site activities, including daily reports, inspection records, and progress photos.</li> <li>Identify potential risks and implement corrective actions to prevent project delays or safety incidents.</li> <li>Participate in site walk-downs, pre-commissioning, and commissioning activities as required.</li> <li>Maintain effective communication with clients, contractors, and project stakeholders.</li> </ul> <h4>Experience</h4> <p>Bachelor’s degree in engineering or construction field. Minimum 5 years of experience in the oil industry and a deep understanding of regulations. Experienced pipeline construction supervisor in onshore greenfield and brownfield projects with a very good knowledge of rules, procedures and international codes and standards. Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.</p> <p>Proficiency in pipeline systems and software.</p> <h4>Technical skills</h4> <ul> <li>In-depth knowledge of piping systems, flowlines, and mechanical installations.</li> <li>Proficiency in reading and interpreting P&IDs, isometric drawings, piping layouts, and structural drawings.</li> <li>Strong understanding of welding procedures, NDT (Non-Destructive Testing), and piping codes (ASME, API, ANSI).</li> <li>Familiarity with pressure testing, hydrotesting, and pre-commissioning activities.</li> <li>Working knowledge of project management and construction planning tools (MS Project, Primavera – preferred).</li> <li>Competence in quality control and inspection processes.</li> <li>Understanding of HSE management systems and risk assessment methodologies.</li> <li>Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint).</li> </ul> <h4>Soft skills</h4> <ul> <li>Strong leadership and team management abilities.</li> <li>Excellent communication and interpersonal skills for coordination with multicultural teams.</li> <li>Strong problem-solving and decision-making capabilities.</li> <li>High level of attention to detail and organizational skills.</li> <li>Ability to work under pressure and meet tight deadlines.</li> <li>Collaborative mindset with the ability to work across departments.</li> <li>Adaptability to changing site conditions and project requirements.</li> <li>Fluency in Arabic and English (verbal and written).</li> </ul></p><p></p>

<p><h4>Instrument & Controls Lead Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>We are looking for an Instrument & Controls (I&C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument & Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&C Engineers as direct reports.</p> <h4>Responsibilities</h4> <ul> <li>Production delivery, optimisation & excellent performance</li> <li>Responsible for day-to-day optimization of I&C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity.</li> <li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed, and managed via operational risk assessment processes.</li> <li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li> <li>Prioritize I&C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li> <li>Actively lead continuous improvement projects involving instrumentation, automation, and control systems; promote continuous improvement philosophy and engage site teams to drive improvement initiatives.</li> </ul> <h4>Qualifications</h4> <ul> <li>Above 10 years experience in oil and gas industry, preferably with international oil companies (direct or contract).</li> <li>Technical degree in engineering or relevant engineering subject.</li> <li>Experience in previous asset engineering or operations engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal, and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – Office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behaviour change management.</li> <li>Not essential but preferable: professional (chartered) engineer.</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Certified professional engineer.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p>We are recruiting for a Welding Engineer with the following details : Location : Basrah, IRAQ Duration : 12 months, renewable Work Scheme : Rotational, 4 weeks ON and 4 weeks OFF Job Overview / Summary Ensure that all welding activities related to pipelines, flowlines, piping, and structures are performed in compliance with Project Specifications, approved procedures, applicable codes.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience Requirements</p><ul><li><p><strong>Total Experience Required:</strong> 20 years in Oil and Gas projects</p></li><li><p><strong>Relevant Experience Required:</strong> 10 years in a similar position</p></li><li><p><strong>Industry-Specific Experience:</strong> Oil and Gas projects</p></li></ul><br><p>Qualifications</p><ul><li><p><strong>Minimum Qualification Required:</strong> International Welding Engineer (IWE / IIW) or Engineering degree in a relevant discipline</p></li><li><p><strong>Language Proficiency:</strong> Fluency in English (speaking and writing); Arabic would be a plus</p></li></ul>

<p><h4>Job description</h4> <p><strong>Division:</strong> CSSP (Ratawi Hub – Iraq)<br> <strong>Direction:</strong> PCM</p> <h4>Situation in organization</h4> <p>The Reporting Engineer position is within the Project Control Organization of the project reporting to the Planning & Reporting Manager.</p> <h4>Job dimensions</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics.</p> <p>In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment.</p> <p>The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.</p> <p>Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr.</p> <p>The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process.</p> <p>The budget of the WIP is circa $3 billion.</p> <p>The Reporting Engineer is expected to commence duties in the 3rd quarter of 2026 and will be based in Basra.</p> <h4>Activities</h4> <p><strong>1- Reporting & Analysis</strong><br> <li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.).</li> <li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries.</li> <li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates.</li> <li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li> <li>Ensure consistency and traceability of reporting documentation across all project phases.</li></p> <p><strong>2- HSE & Risk Reporting</strong><br> <li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams.</li> <li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting.</li> <li>Assist in compiling and presenting periodic risk assessments and mitigation tracking.</li></p> <p><strong>3- Systems & Tools</strong><br> <li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports.</li> <li>Ensure data integrity and alignment between planning, cost control, and reporting systems.</li></p> <p><strong>4- Documentation & Compliance</strong><br> <li>Ensure compliance with TotalEnergies, BOC, and project standards for reporting procedures.</li> <li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation.</li> <li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.</li></p> <p><strong>5- Information Management & Digitalization</strong><br> <li>Lead project information management and digitalization activities.</li> <li>Supervise the Information Management Assistant and oversee project information, data, and records management.</li> <li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders.</li> <li>Coordinate information exchange between Company and Contractors.</li> <li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems.</li> <li>Develop and maintain project data repositories, dashboards, and reporting systems.</li></p> <h4>Context and environment</h4> <p>TotalEnergies is acting as contractor to BOC. After the completion of the project, the facilities will be handed over to BOC for operation.</p> <h4>Accountabilities</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision-making across all stakeholders.</p> <h4>Qualifications / Experience required</h4> <li>Degree in engineering, data analytics, or related field.</li> <li>Minimum 5 years of experience in project reporting within large-scale industrial or oil & gas projects.</li> <li>Strong analytical and data visualization skills.</li> <li>Proficiency in reporting tools (Power BI, Excel, Word, PowerPoint, etc.).</li> <li>Experience in information management or project data management.</li> <li>Understanding of data governance and information quality principles.</li> <li>Good communication and organizational skills.</li> <li>Ability to work in a multicultural and high-pressure environment.</li> <li>Experience in engineering/construction commercial or contracts administration role.</li> <li>Ability to listen to and understand the signals and queries from various interlocutors.</li> <li>Languages: English is mandatory; knowledge of French and Arabic is a plus.</li></p><p></p>

<p>Under the overall guidance of the Project Manager and the direct supervision of the Lead Civil Engineer, the Civil Engineer is required to perform the following specific duties and responsibilities ensuring their effectiveness, transparency, and integrity:</p> <p>Plan, supervise, and manage the implementation of rehabilitation and/or construction works, ensuring alignment with project requirements, timelines, and budgets.</p> <p>Responsible for implementation and contributing to the preparation of the bill of quantities, as-built and construction drawings, Specifications and other engineering documents.</p> <p>Responsible for day-to-day site visit of the construction works, coordination with the contractors and suppliers according to the needs and requirements on site; Inspects and report on contractor s works in progress ensuring that the contractor meets client`s quality standards and implement the contract in accordance with the regulations.</p> <p>Provide support and guidance to the contractor and assists in resolving site problems, as necessary; Assist in the preparation of project plans, detailed schedules, and progress reports, and contribute to project closure activities and documentation.</p> <p>Responsible for supervision of site technical staff and consultants assigned to the project, and the assignment and monitoring of duties during the progress of works; Liaise with relevant government authorities, beneficiaries, and stakeholders to facilitate permits, secure approvals, and maintain effective working relationships.</p> <p>Embed sustainability dimensions including social and gender inclusion, as well as Health, Safety, Security, and Environmental (HSSE) aspects into the project during the design and construction phases; Ensure PSEA measures are implemented throughout the project implementation, as per the country PSEA action plan; Perform other related duties as required by the Project Manager.</p> <p>Supervise and monitor contractors setting-out and construction activities, ensuring full compliance with contract specifications, approved work plans, and project requirements in terms of scope, timeline, and budget; Conduct daily site visits to monitor work progress, identify issues, and propose practical engineering solutions in coordination with the Project Manager and Lead Civil Engineer; Responsible for preparation of progress reports on construction activities, according to the agreed timeframe of works and submission of such on a weekly basis to the Project Manager; Assess and report on the project closing plans, archiving of cost and progress report and hand over all related reports to the Project Manager; Evaluate and assess work schedules and programmes, including the comparison with the schedule baselines and reports to the Project Manager accordingly; Check all laboratory reports, operation and maintenance manuals, and keep records and report to the Project Manager accordingly; Assess the work activities of contractor/s, measure completed work, and make recommendations to the Project Manager for progress payments to contractors.</p> <p>Carry out on-site technical inspections and assessments to ensure that all construction activities comply with client`s quality standards and approved project specifications. Maintain accurate records and compile periodic and ad hoc reports in accordance with client`s procedures and reporting requirements.</p> <p>Conduct site inspections, testing, and quantity verification, and review/approve technical submittals including shop drawings, material approvals, and as-built documentation. Maintain records, compile periodic reports and any specific reports required by client`s standard procedures; Responsible for the preparation and verification of a database for the available materials shipped to the project, schedules of labor force, and monitoring of quality of such during the progress of works; Check, verify and approve the interim payments submitted by the Contractor/s and submit detailed reports to the Project Manager.</p> <p>Maintain accurate records of site activities, inspections, incidents and progress, ensuring timely submission of reports (weekly/monthly/quarterly). Support project closure through commissioning, handover and archiving of construction documentation. Assist in compiling periodic and specific reports, and ensure all project documentation is up-to-date and properly filed. Support the Project Team in overseeing change controls, risk and issue registers, and ensure timely and accurate reporting on project progress.</p> <p>Ensure that lessons learned and challenges are documented throughout the project implementation and shared with the project team; Participate in knowledge-sharing initiatives and contributing insights and lessons learned.</p> <p>Project reporting Civil Engineer will be reporting to Lead Civil Engineer and/or Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><h3>Key competencies</h3> <p>A minimum of 2 years of experience in development and coordination within agricultural, water resources , or related projects, particularly in irrigation (Open Channels and Closed Pipe System) and water-related activities, is required. Experience in site supervision, as well as monitoring and evaluation, is required. Experience working on international and/or local projects in conflict-affected areas is preferred. Experience in implementing and delivering projects for international organizations is considered an asset. Experience in report writing, data analysis, and document drafting is desirable. Experience in Health and Safety Management is desirable. Experience in quality assurance and quality control (QA/QC) for infrastructure projects is desirable. Experience working in the southern governorates is desirable.</p> <h3>Team management</h3> <p>This role has no team management</p> <h3>Further information</h3> <p>Disclaimer: At no stage of the recruitment process will CTG ask candidates for a fee. This includes during the application stage, interview, assessment and training. CTG has a zero tolerance to Sexual Exploitation and Abuse (SEA) which is outlined in its Code of Conduct. Protection from SEA is everyone s responsibility CTG encourages all candidates applying for this advertisement to ensure that their candidate profile is up to date with up to date experience / education / contact details, as this will help you being considered further in your application for this role.</p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>The Construction Supervisor is responsible for overseeing and managing all on-site construction activities, ensuring that projects are executed safely, on schedule, within budget, and in compliance with project specifications, quality standards, and HSE regulations. The role involves supervising construction teams, subcontractors, and day-to-day site operations with a primary focus on flowlines, mechanical works, and piping systems in the oil and gas sector.</p> <h4>HSE activities</h4> <ul> <li>Support and enforce project guidelines and HSE objectives.</li> <li>Attend HSE meetings and training when necessary.</li> <li>Participate in job safety analysis, make suggestions, stop dangerous situations, and report anomalies and dangerous acts.</li> </ul> <h4>Key job responsibilities</h4> <ul> <li>Supervise and coordinate all on-site construction activities related to flowlines, mechanical installations, material and piping systems.</li> <li>Ensure work is carried out in strict compliance with project specifications, engineering drawings, and applicable codes/standards.</li> <li>Monitor daily work progress and report to the Construction Manager on project status, delays, and resource requirements.</li> <li>Manage and supervise construction crews, subcontractors, and vendors to ensure efficient and quality workmanship.</li> <li>Review and interpret P&IDs, isometric drawings, piping layouts, and mechanical installation drawings.</li> <li>Coordinate with engineering, procurement, and quality control teams to resolve technical issues and ensure material availability.</li> <li>Conduct quality inspections on welding, piping fabrication, pressure testing, and mechanical installations.</li> <li>Ensure proper documentation and reporting of site activities, including daily reports, inspection records, and progress photos.</li> <li>Identify potential risks and implement corrective actions to prevent project delays or safety incidents.</li> <li>Participate in site walk-downs, pre-commissioning, and commissioning activities as required.</li> <li>Maintain effective communication with clients, contractors, and project stakeholders.</li> </ul> <h4>Experience</h4> <p>Bachelor’s degree in engineering or construction field. Minimum 5 years of experience in the oil industry and a deep understanding of regulations. Experienced pipeline construction supervisor in onshore greenfield and brownfield projects with a very good knowledge of rules, procedures and international codes and standards. Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team.</p> <p>Proficiency in pipeline systems and software.</p> <h4>Technical skills</h4> <ul> <li>In-depth knowledge of piping systems, flowlines, and mechanical installations.</li> <li>Proficiency in reading and interpreting P&IDs, isometric drawings, piping layouts, and structural drawings.</li> <li>Strong understanding of welding procedures, NDT (Non-Destructive Testing), and piping codes (ASME, API, ANSI).</li> <li>Familiarity with pressure testing, hydrotesting, and pre-commissioning activities.</li> <li>Working knowledge of project management and construction planning tools (MS Project, Primavera – preferred).</li> <li>Competence in quality control and inspection processes.</li> <li>Understanding of HSE management systems and risk assessment methodologies.</li> <li>Proficient in Microsoft Office Suite (Word, Excel, Outlook, PowerPoint).</li> </ul> <h4>Soft skills</h4> <ul> <li>Strong leadership and team management abilities.</li> <li>Excellent communication and interpersonal skills for coordination with multicultural teams.</li> <li>Strong problem-solving and decision-making capabilities.</li> <li>High level of attention to detail and organizational skills.</li> <li>Ability to work under pressure and meet tight deadlines.</li> <li>Collaborative mindset with the ability to work across departments.</li> <li>Adaptability to changing site conditions and project requirements.</li> <li>Fluency in Arabic and English (verbal and written).</li> </ul></p><p></p>

<p><h4>Job purpose</h4> <p>To maintain, repair HVAC system in process area. Perform preventive and shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. heating, ventilation, air conditioning systems in Majnoon.</p> <h4>Duties and responsibilities</h4> <ul> <li>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</li> <li>Troubleshoot issues with industrial HVAC system.</li> <li>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</li> <li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradley etc.</li> <li>Troubleshoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</li> <li>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines.</li> <li>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls.</li> <li>Operate a variety of hand and power tools, brazing torch, vacuum pump, test equipment utilized.</li> <li>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</li> <li>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</li> <li>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments.</li> <li>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>University degree in related discipline.</li> <li>8-10 years’ experience of HVAC system and AC units within a large industrial plant, preferably in the oil and gas industry.</li> <li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li> <li>Proficient in reading schematics and work plans.</li> <li>Computer and software skills: <ul> <li>Excel – advanced</li> <li>Word – intermediate</li> <li>PowerPoint – intermediate</li> </ul> </li> <li>Intermediate proficiency in English verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Knowledge of materials, methods and tools used in the operation and repair of HVAC.</li> <li>Knowledge of welding and soldering techniques.</li> <li>Proper methods of storing equipment.</li> <li>Aware about PTW system and working in oil field.</li> <li>Have IT skills (Excel, PowerPoint, Microsoft Office, SharePoint etc.).</li> <li>Communicate effectively both orally and in writing.</li> <li>Work cooperatively with others.</li> <li>Work independently with little direction.</li> <li>Meet schedules and timelines.</li> <li>Maintain routine records and prepare reports.</li> </ul></p><p></p>