Air Conditioning Technician Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview This position is physically located in Balad, Iraq Under the supervision of the ESH Supervisor, the ESH Specialist Lead implements a standardized ESH program, which is Management System based. Performs risk analysis, develops programs that exceed basic regulatory compliance, identifies needed resources (such as personal protective equipment) and budget for resources, identifies required training for employees in various operations, performs and documents training, documents and submits monthly performance metrics, performs ESH inspections, and implements employee reward and recognition program. Reads and understands regulatory compliance and submits any documentation required to operate under permits (such as air, hazardous waste, and water). Communicates (manage-from-the-floor type) with senior management, area supervisors, and regulators to help implement a complete ESH program. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Implements a standardized ESH program, which is Management System based + Performs risk analysis, develops programs that exceed basic regulatory compliance + Identifies needed resources (such as personal protective equipment) and budget for resources + Identifies required training for employees in various operations, performs and documents training, documents and submits monthly performance metrics + Performs ESH inspections, and implements employee reward and recognition program + Reads and understands regulatory compliance and submits any documentation required to operate under permits (such as air, hazardous waste, and water) + Communicates (manage-from-the-floor type) with senior management, area supervisors, and regulators to help implement a complete ESH program Qualifications + Minimum Qualifications: + Education/Certifications: + One year related experience may be substituted for one year of education, if degree is required. + Bachelor's degree in Environmental Science, Chemistry, Engineering, Biology or Technical certification in Occupational Health, Industrial Hygiene, Industrial Safety, Environmental Science/Management. + Must be a U.S. Citizen + Experience: + Minimum of five (5) years of experience in environmental compliance, OSHA compliance, ISO experience, and hazardous waste management and pollution prevention. + Supervisory/Leadership experience (Desired) + Knowledge of Overseas Environmental Baseline Guidance Document (OEBGD), Department of Defense (DoD) environmental regulations, and US Army Safety and Environmental Regulations, including Federal OSHA and EPA regulations. + Military background and training beneficial. + Skills: + Ability to instruct small and medium groups of people, Competent in computer operations to include Microsoft Office; Outlook, Word, Excel, and PowerPoint. + Must have a strong ability to work independently as a member of a robust team. + Able to manage others to complete assigned task + Supervisory Responsibilities: + May supervise ESH specialists. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. + PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payloads, communications and navigation systems, as well as associated support equipment including boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Additional responsibilities include performing analyses of system operations. Candidates must have:</p> <ul> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <p>Candidates will perform user-level maintenance functions including performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government clearance. US citizenship is required to obtain a Secret clearance.</li> <li>At least one year previous aerostat experience.</li> <li>Certified and school trained on 34M and 74K.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><div><span >Purpose for this Service:</span></div><div><span ><br></span></div><div><span >The Service Provider is responsible for providing comprehensive logistics, equipment, accommodation, catering, and event management services. The Provider shall act as a single point of contact, ensure seamless coordination, and manage all operational aspects including contingency planning.</span></div><div><span ><br></span></div><div><span >The validation workshop aims to engage key national stakeholders in reviewing and validating the draft Sector-Focused Operational Guidelines of the National Public Works Programme (NPWP). It will serve as a platform to strengthen government ownership, ensure alignment with national priorities, institutional procedures, and implementation arrangements, and build consensus on the proposed operational modalities. The workshop will also provide an opportunity to identify any remaining gaps and agree on key actions required to support the effective implementation of the guidelines. Specifically, the workshop will:</span></div><div><span ><br></span></div><div><span >Present the final draft Sector-Focused Operational Guidelines, including their objectives, operational arrangements, and implementation procedures.</span></div><div><span ><br></span></div><div><span >Validate the draft guidelines through structured discussions with relevant stakeholders at policymaking and technical levels, ensuring their relevance, practicality, and alignment with national priorities and institutional frameworks.</span></div><div><span ><br></span></div><div><span >Strengthen government ownership of the guidelines by engaging the Steering Committee, Technical Working Group, and other relevant institutions in the review and validation process.</span></div><div><span ><br></span></div><div><span >Facilitate consensus-building among government entities, workers' and employers' organizations, and development partners on the operational approaches and implementation mechanisms proposed under the guidelines.</span></div><div><span ><br></span></div><div><span >Collect and document technical comments, recommendations, and formal feedback to support the finalization of the Sector-Focused Operational Guidelines.</span></div><div><span ><br></span></div><div><span >Confirm institutional roles, responsibilities, and coordination arrangements required for the effective implementation of the guidelines within the NPWP framework.</span></div><div><span ><br></span></div><div><span >Agree on the next steps towards the endorsement, operationalization, and application of the guidelines under the National Public Works Programme.</span></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>The Service Provider is responsible for providing comprehensive logistics, equipment, accommodation, catering, and event management services. The Provider shall act as a single point of contact, ensure seamless coordination, and manage all operational aspects including contingency planning.</p><p>Specifically, the workshop will:</p><ul><li>Present the final draft Sector-Focused Operational Guidelines, including their objectives, operational arrangements, and implementation procedures.</li><li>Validate the draft guidelines through structured discussions with relevant stakeholders at policymaking and technical levels, ensuring their relevance, practicality, and alignment with national priorities and institutional frameworks.</li><li>Strengthen government ownership of the guidelines by engaging the Steering Committee, Technical Working Group, and other relevant institutions in the review and validation process.</li><li>Facilitate consensus-building among government entities, workers' and employers' organizations, and development partners on the operational approaches and implementation mechanisms proposed under the guidelines.</li><li>Collect and document technical comments, recommendations, and formal feedback to support the finalization of the Sector-Focused Operational Guidelines.</li><li>Confirm institutional roles, responsibilities, and coordination arrangements required for the effective implementation of the guidelines within the NPWP framework.</li><li>Agree on the next steps towards the endorsement, operationalization, and application of the guidelines under the National Public Works Programme.</li></ul><p>Conditions that must be met in the hall:</p><ul><li>The halls should have enough space for sitting including registration table at the entrance, per each day</li><li>The hall should have easy access to a minimum of 2 toilets</li><li>The hotel should have full considerations for disability access</li><li>The Hall should be sufficiently bright with good light and air conditions.</li><li>The hotel shall arrange for fully functional electronic and audio-visual equipment and workshop materials (such as banners and/ or flags banners, data shows, wireless microphones, audio systems, teleconference equipment, etc.)</li><li>Flipcharts with stands, whiteboard with paper, and markers</li><li>Meeting signage includes company logo to guide your guests.</li><li>5 stars hotel and they must be approved by UNDSS. UNDSS security cleare</li><li>Room on ground floor or higher (not basement floor)</li><li>Free Wi-Fi internet connection in the training room.</li><li>Pens and notepads per participants.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities Description Major Job Activities Key Responsibilities: +  Train, advise, assist , and integrate IqAF wheel and tire backshop personnel in standard practices and fleet health management. + Oversee and participate in receiving, disassembling, inspecting, and rebuilding F-16 wheels and tires. +  Ensure availability of spares, initiate parts ordering, and manage wheel and tire inventory to support flightline operations. +  Support CDDAR procedures and instruct IqAF personnel in emergency recovery techniques and safety. + Use and teach interpretation of technical publications, schematics, and specifications. +  Document maintenance activities and train IqAF in proper recordkeeping protocols. + Recommend improvements to increase shop productivity and maintenance process efficiency. Material &amp; Equipment Directly Used Wheel and tire shop tools, inspection stands, CDDAR equipment, torque wrenches, air compressors, technical publications, Microsoft Office. Working Environment Backshop and flightline settings in a deployed operational environment. Exposure to aircraft maintenance areas and recovery operations. Physical Activities Lifting up to 50 pounds, standing, kneeling, working around heavy aircraft components and in confined areas. Qualifications + Education: High school diploma or equivalent required . Technical training in aircraft maintenance preferred . + Certifications: USAF 7-skill level (Craftsman) in Wheel and Tire + Experience: 8 to 10 years of experience in F-16 aircraft maintenance, including at least 3 years as a wheel and tire specialist and must have CDDAR experience. + Other Requirements: U.S. Citizenship; Secret clearance or interim required; strong interpersonal and training skills; positive program/customer review; experience with international teams preferred; deployable worldwide including Middle East. Skills and Technology Used: Wheel and tire shop tools, maintenance documentation systems, Logistics Management Systems, Microsoft Office. What We Bring + At V2X, we strive to be market competitive in our total reward offerings. + The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. + Please speak with a recruiter for additional information. + Employee benefits include the following: + Healthcare coverage + Retirement plan + Life insurance, AD&amp;D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Additional responsibilities include performing analyses of system operations and candidates must have:</p><p>Knowledge of and experience in the operations of hardware systems and components. Experience in fault detection, isolation, and correction of hardware systems and individual components. Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards. Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p><p>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</p><p>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</p><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. #TAMOD</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain a Secret Clearance.</li><li>At least ONE (1) year previous Aerostat experience.</li><li>Certified and school trained on 34M and 74K.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under the supervision of the PMO Quality Senior Manager, the Quality Manager is responsible to provide a Total Quality Management System that anticipates &amp; resolves potential quality problems &amp; provides continuous oversight necessary to perform throughout the LOGCAP AOR. Oversee all quality-related functions, including Program-level Quality Surveillance/Audit, Customer Feedback Program, process Improvements, Document Control. This position also coordinates activities with various intermediate managers throughout the program.</p><p>Provides expert knowledge and experience in running a comprehensive Quality Management system for the program. Possess the technical ability to develop executive Corrective Action Plan in response to third party nonconformance reports (NCR). Coordinates the correction of minor problems with the functional area managers and acts as liaison with the Government Contract Officer Representatives (CORs) and Quality Assurance Representatives (QARs). Evaluate how overall work center performance is meeting Performance Work Statement (PWS) requirements. Implements ISO 9001:2015 Standards. Ensures processes and procedures required are executed in compliance with project specifications, standards and safety and security requirements. Review Work-center Plans, Standard Operating Procedures (SOP), Internal Operating Procedures (IOP) and Work Instructions (WI), to ensure they provide proper operational information and direction for performing all tasks. Ensures QA Audit plans, and corrective actions are identified where any non-conformities or process deviations are identified and follow up these to conclusion. Direct corrective actions for all discrepancies and monitor compliance. Evaluate and resolve customer complaints and take actions to preclude reoccurrence. Schedule VOC to insure contract performance meets or exceeds requirements. Coordinate with the technical sections to assist in developing KPIs to measure the PWS of the various sections. Perform other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor s degree in Business Administration, Computer Science, Engineering, or closely related field is required.</li><li>Ability to possess an ISO 9001:2015 Lead Auditor.</li><li>Knowledge of DMAAIC principles is preferred.</li><li>Six Sigma Black Belt certification (Strongly Desired)</li><li>Must have ability to acquire and maintain a Secret Clearance.</li><li>PMP Certification (Strongly Desired)</li><li>A minimum of ten (10) years in a DOD environment, (7) years of Quality experience required with at least five (5) years of leadership/management experience.</li><li>Has Proven Leadership of Quality or Project Management of multiple projects or remote sites</li><li>Successful candidate must also show evidence of knowledge of running a Quality Management System (QMS), experience in DMAIC or LEAN principles with continuous improvement projects.</li><li>Candidate must also be able to work under pressure in a high tempo environment and manage multiple assignments simultaneously.</li><li>Must have and extensive knowledge of FAR, ISO 9001:2015 &amp; DoD regulations</li><li>Must have higher or Senior level organizational skills.</li><li>Computer proficiency in Microsoft Office Excel, PowerPoint, Outlook, Word, SharePoint, Project and Visio.</li><li>Ability to work with very diverse workforce.</li><li>Excellent English communicator both in writing and verbally.</li><li>Expertise in how SOP'S, Plans, Work Instructions, processes are executed is a must.</li><li>Proven skills in Analytical/Problem Solving.</li><li>Strong planning and organizational skills.</li><li>Interpersonal skills to represent the PMO during audits and inspections, to participate in various meetings and to present data/metrics to program leadership and technicians as required.</li><li>Strong attention to detail is required.</li><li>Knowledge of PMI Methodologies and principles preferred.</li><li>Provides leadership, mentoring and supervision of Quality System Supervisors/Leads/Auditor.</li><li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li><li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li><li>Includes some industrial production environment conditions as well.</li><li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li><li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents.</li><li>Employee use of personal protective equipment (PPE) is required for some situations.</li><li>PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li><li>Must comply with all Fire and Safety Regulations and post policies.</li></ul><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver's license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical Maintenance Mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical Maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required by employer and customer for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience: <ul> <li><strong>Electrical maintenance mechanic:</strong> Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools). Ability to read electronic schematics. O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> <li><strong>Networking, IT & information systems:</strong> Two years’ experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered. CCIE certification with fiber optic certification is preferred.</li> <li><strong>Mechanical maintenance:</strong> Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required. O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes, aerial lift, forklift, industrial generator sets.</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position will require 6-week 34M training TDY to Elizabeth City, South Carolina. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required. Ability to read electronic schematics. O&amp;M of electro-mechanical equipment to include one or more of the following: Hydraulic/servo valves Hydraulic actuators, control systems Test and diagnostic equipment</li><li>2) Networking, IT &amp; information systems Two years experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered. CCIE certification with fiber optic certification is preferred.</li><li>3) Mechanical Maintenance Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required. O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul><li>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li><li>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</li><li>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</li></ul><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment such as boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one year previous aerostat experience or two years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools).</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT and information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend, stoop, and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch and reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p> <p>Position requires a six-week 34M training temporary duty assignment (TDY) to Elizabeth City, South Carolina.</p></p><p></p>

Description <br> <p> </p><p> <strong>About GE Vernova</strong> <strong> <br> </strong>GE Vernova is a planned, purpose-built global energy company that includes Power, Wind, and Electrification businesses and is supported by its accelerator businesses of Advanced Research, Consulting Services, and Financial Services. Building on over 130 years of experience tackling the world s challenges, GE Vernova is uniquely positioned to help lead the energy transition by continuing to electrify the world while simultaneously working to decarbonize it. GE Vernova helps customers power economies and deliver electricity that is vital to health, safety, security, and improved quality of life. GE Vernova is headquartered in Cambridge, Massachusetts, U.S., with more than 80,000 employees across 100+ countries around the world.</p> <p>GE Vernova s <strong>Gas Power</strong> business engineers advanced, efficient natural gas-powered technologies and services, along with decarbonization solutions that aim to help electrify a lower carbon future. As part of the Gas Power One Field Services team,<strong> FieldCore</strong> installs, maintains and upgrades power generation equipment, enabling operators of the world s energy infrastructure to provide more reliable and affordable energy.</p> <p> <strong>Job Summary</strong> </p> <p>The Electrician installs, troubleshoots, and repairs electrical systems, apparatuses, and electrical control components of stationary engines and mechanical device such as gas turbine engines, steam turbines, diesel engines, generators, heat recovery steam generators, gas compressors, air compressors, motors, pumps, chillers, uninterruptible power supply systems and other related device by performing the following duties.</p> <p> <strong>Essential Duties &amp; Responsibilities:</strong> </p> <ul> <li>Diagnose cause of electrical malfunction or failure of operational device such as transformers, motors, relays, switches, control and monitoring devices and takes corrective measures in collaboration with Maintenance Manager / Supervisor.</li> <li>Install wire and conduit for newly installed machines and device.</li> <li>Terminate wiring to machines and devices, connects cables and wires between machines and device.</li> <li>Replace faulty wiring and electrical components of machines such as relays, switches, motors, and position sensing devices.</li> <li>Replace electric motor bearings.</li> <li>Align, adjust, and calibrate device according to specifications.</li> <li>Maintain records of repairs, calibrations, and tests.</li> <li>Read dials or digital displays that indicate electronic characteristics such as voltage, frequency, distortion, inductance, and capacity.</li> <li>Read meters and gauges or automatic recording devices at specified intervals to verify proper operation.</li> <li>Record maintenance actions taken on work order forms.</li> <li>Dismantle devices to gain access to and remove defective parts.</li> <li>Advise maintenance manager / supervisor on inventory of repair parts and supplies and ordering material as needed</li> <li>Work with operational staff to test device performance.</li> <li>Read and understand technical manuals and system piping and instrumentation diagrams.</li> <li>Perform preventative and corrective maintenance in accordance with technical manual procedures.</li> <li>Prepare legible and understandable work orders for required preventative and corrective maintenance.</li> <li>Read, understand, and comply with all plant safety and regulatory procedures.</li> <li>Comply with all the EHS policies and procedures as adopted and implemented at plant site.</li> <li>Understand OH&amp;S risks / hazards and environmental / legislative aspect / impacts related to work activities.</li> <li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li> <li>Travel extensively (internationally and domestically)</li> <li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li> </ul> <p> <strong>Required Qualifications &amp; Experience</strong>:</p> <ul> <li>Diploma or Associate Engineering Degree in Electrical Technology and/or 3 years of experience in Combined Cycle Power Plants / Petro-Chemical industries</li> </ul> <p> <strong>Desired Characteristics:</strong> </p> <ul> <li>Quick learner, good attitude, skills, and ambition</li> <li>Basic skills training with knowledge of fundamental concepts, practices and procedures of a particular field of specialization.</li> <li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.</li> <li>Ability to write routine reports and correspondence.</li> <li>Ability to speak effectively to employees of the organization.</li> <li>Good electrical / mechanical aptitude and experience utilizing hand held and power tools including standard meters, scopes, and electrical troubleshooting equipment.</li> <li>Experience in a hands-on electrical position in an industrial environment highly desired.</li> <li>Knowledge of electricity, electric motors, code a major plus.</li> <li>Strong organizational skills.</li> <li>Ability to work well both independently and in a team environment.</li> <li>In-depth safety training a major plus</li> </ul> <p> <em>FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law</em> </p> <p> <em>FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law</em> </p> <p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span>Purpose of the Job <br></span><p><span><span><span>The Freight Operation Manager will provide customer management teams with best solution that can increase the product revenues and profit at the same time enhance freight product operations service, efficiency and reduce direct and indirect cost. As a Freight Operation manager at Aramex, you will be the primary point of contact for clients regarding freight inquiries. the role is pivotal in maintaining strong client relationships, while also delivering tailored freight solutions to meet their specific needs. You will play a crucial part in procuring competitive rates, managing shipments from start to finish, and supporting the sales team in securing new business opportunities</span></span></span><span><span><span><span><span>.</span></span></span></span></span></p><br><br> <br>Job Description <br><ul> <li>Cultivate and nurture strong relationships with clients to foster loyalty and retention.</li> <li>Negotiate competitive rates with carriers, agents, and offices to secure the best and lowest pricing for clients.</li> <li>Exceed overall freight targets for assigned customers through proactive management and strategic initiatives.</li> <li>Provide the Station Manager and the CMT with effective market data. This may include information about the competition, upcoming projects, product statistics and product profitability reports, etc.&nbsp;</li> <li>Conduct training for CMTs and other department new hires when needed to improve the products awareness within country and ensure they CMT are selling the product effectively.</li> <li>Identify employees with high potential and propose career development plan.</li> <li>Facilitate the communication between the CMTs and Operations teams.&nbsp;</li> <li>Help the CMT resolve any operational related problem&nbsp;</li> <li>Share the updated sales and pricing list with CMTs and ensure CMTs are abiding with the list&nbsp;</li> <li>Assist the CMTs and operations with shipments that need special shipping requirements&nbsp;</li> <li>Help the CMT resolve any operational related problem&nbsp;</li> <li>Report the status of the product to the country manager on monthly basis&nbsp;</li> <li>Visit customers with CMTs on regular basis and offer solutions for their special projects&nbsp;</li> <li>Participate in product exhibitions where his potential customers visiting or participating&nbsp;</li> <li>Approve Amendment Request Notice (ARNs)&nbsp;</li> <li>Provide CMTs with Rates for tenders&nbsp;</li> <li>Support the CMTs in customizing customers offers when needed&nbsp;</li> <li>Communicate to the teams/ customers new campaigns&nbsp;</li> <li>Share the special discounts rates with CMTs&nbsp;</li> <li>Adhere to company HSSE, compliance and sustainability corporate policies and standards&nbsp;<br> &nbsp;</li> </ul> <br>Job Requirements - Experience and Education <br><ul> <li><span><span><span>Bachelor’s degree in supply chain management, Logistics, Business Administration, International Business, or a related field is often preferred.</span></span></span></li> <li><span><span><span>3-5 years of relevant experience in the air freight forwarding industry, with a strong understanding of global trade lanes.</span></span></span></li> <li><span><span><span>Proven experience in customer service and managing key business clients.</span></span></span></li> <li><span><span><span>Familiarity with CargoWise is preferred.</span></span></span></li> <li><span><span><span>Proficiency in Microsoft Office applications, including Word, Excel, and PowerPoint.</span></span></span></li> <li><span><span><span>Excellent written communication skills.</span></span></span></li> </ul> <br>Leadership Behaviors <br>Building Outstanding Teams<br>Setting a clear direction<br>Simplification<br>Collaborate &amp; break silos<br>Execution &amp; Accountability<br>Growth mindset<br>Innovation<br>Inclusion<br>External focus<br>Skills <br>Interpersonal Skills<br>Team Collaboration<br>Adaptability<br>Resilience<br>Problem Solving<br>Leadership Skills<br>Time Management<br>Decision Making<br>Negotiation Skills<br>Coaching<br>Problem Solving And Critical Thinking<br> </div>

<p>Wood is recruiting for an Electrical &amp; Instrument Supervisor ((Iraqi National) to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and standards. This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><p>Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected: Bachelor s degree in electrical engineering, 5 to 10 years of experience in the oil industry, with significant experience with SIMOPS works, Strong understanding of Oil &amp; Gas International Codes and Standards, Proactive and team-oriented approach with the ability to work collaboratively across complex project teams. Strong technical and problem-solving skills, Excellent communication and interpersonal skills, Ability to work effectively under pressure, Detail-oriented with strong organizational skills.</p><p>Wood is recruiting for an Electrical &amp; Instrument Supervisor ((Iraqi National) to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and standards. This role is a full-time on-site role in Basra, Iraq with travel requirement. #Wood #Iraq #Basra #Electrical &amp; Instrument Supervisor</p><p>The role</p><p>This is an exciting opportunity for an experienced Electrical &amp; Instrument Supervisor to join our Iraq Business Unit.</p><p>Our Clients and Projects</p><p>Designing the future. Transforming the world. This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production. The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24 , ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities. Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><p>Job Objectives:</p><ul><li>Receive and verify all electrical equipment, ensuring conformity to project specifications and standards.</li><li>Coordinate and schedule equipment deliveries to the site, planning and managing logistics for all electrical equipment.</li><li>Develop and implement preservation plans for electrical equipment on-site, ensuring proper maintenance until installation.</li><li>Supervise the installation of all electrical equipment.</li><li>Coordinate with other disciplines to ensure site readiness, including foundation preparation and electrical interfaces.</li><li>Be proactive in addressing potential issues and ensuring smooth installation processes.</li><li>Implement and oversee QA/QC procedures during equipment installation, conducting inspections to ensure compliance with quality standards.</li><li>Manage and coordinate electrical construction activities, resolving any on-site technical issues.</li><li>Assist in pre-commissioning and commissioning of electrical systems, ensuring all systems meet performance criteria.</li><li>Prepare and manage the hand-over of electrical systems, ensuring all documentation is complete and accurate.</li><li>Interface between interdisciplinary departments and within international teams, ensuring seamless integration of electrical systems</li><li>Maintain and update technical documentation, including technical reports and specifications.</li><li>Troubleshoot and resolve electrical issues, providing technical support as needed.</li><li>Monitor a team of contractor s electrical technicians, providing guidance and training as necessary.</li><li>Monitor and control project costs related to electrical work, identifying, and implementing cost-saving measures.</li><li>Develop and manage electrical work schedules, ensuring timely completion of all electrical activities.</li><li>Assist in the procurement of electrical equipment and materials, reviewing vendor documentation for compliance.</li><li>Identify and mitigate risks related to electrical activities, implementing contingency plans as necessary.</li><li>Manage changes to electrical systems and documentation, evaluating and approving change requests.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in electrical engineering, 5 to 10 years of experience in the oil industry, with significant experience with SIMOPS works, Strong understanding of Oil &amp; Gas International Codes and Standards, Proactive and team-oriented approach with the ability to work collaboratively across complex project teams. Strong technical and problem-solving skills, Excellent communication and interpersonal skills, Ability to work effectively under pressure, Detail-oriented with strong organizational skills.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> <p> <strong>***This position will be physically located in Iraq in support of LOGCAP.***</strong> </p> <p> </p> <p>The Movement Control Supervisor is responsible for assisting the Transportation Manager with day to day movement control operations. Manages employees within assigned Movement Control Team (MCT). The Movement Control Supervisor must be capable of performing, but not limited to, the following movement control functions: Customer Service; Convoy Briefings; Staging Area Management; Hazardous Materiel (HAZMAT) Documentation Certification is provided by the customer; Movement Control Reports; RFID Management; Document Cargo; Container Management: and Safety Briefings. Employee must be familiar with Transportation Movement Requests (TMR), Transportation Control and Movement Document (TCMD), and regulation that pertain to Movement Control. The Movement Control Supervisor must be Hazardous Materiel (HAZMAT) certified and obtain the ability to utilize and train employees on the Global Transportation Network (GTN), Integrated Booking System-Container Management Module (IBS-CMM), The Movement Control Supervisor must have the ability to utilize and train employees on Radio Frequency Identification (RFID) tags and Transportation Coordinators'- Automated Information for Movement System II (TC-AIMS II).</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <strong>This position description is subject to change at any time as needed to meet the requirements of the program or company.</strong> </p> <ul> <li>Supervises Movement Control Specialists and Seniors.</li> <li>Processes TMRs, TCMDs, and arranges transportation for moving personnel, equipment, and sustainment supplies.</li> <li>Processes convoy clearance requests and special hauling permits.</li> <li>Determines the mode of transportation (air, rail, inland waterway, or highway) for unscheduled moves and commits transportation assets.</li> <li>Maintains communication with the transport services, shippers, receivers, and if applicable, HN movement control agencies.</li> <li>Maintains the status of and advise the Movement Control Battalion (MCB) on the location of units, installations, and pipeline take-off points; transportation requirements; availability of modes of transport; shipper and receiver capabilities; trends of asset use capacity and the general transportation movements' situation in their areas.</li> <li>Assists unit commanders and service representatives on transportation matters.</li> <li>Assists in carrying out the movement program and directives from higher headquarters.</li> <li>Coordinates movement from origin to destination and inbound clear movements when required.</li> <li>Maintains accountability of containers and chassis for other services and commercial carriers and ensuring that they are promptly returned to the appropriate transport system.</li> <li>Validates transportation requirements, coordinates transportation support, and inbound clearance for moving units, personnel, and cargo.</li> <li>Perform other duties as assigned.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications: </strong>Education/Certifications: One year related experience may be substituted for one year of education, if degree is required.<ul> <li>Must be CAC eligible and/or able to obtain a Common Access Card (CAC)</li> <li>Must be a U.S. Citizen</li> <li>High School Diploma or Equivalent required.</li> </ul> </li> <li> <strong>Secret Clearance:</strong> <ul> <li>Ability to obtain and maintain a Secret Clearance.</li> </ul> </li> <li> <strong>Preferred Qualification:</strong> <ul> <li>Undergraduate Degree is preferred.</li> </ul> </li> <li> <strong>Experience:</strong> <ul> <li>Five (5) years of related work and supervisory experience.</li> <li>Excellent computer, interpersonal, and oral and written communication skills required.</li> <li>Computer skills include a working knowledge of Microsoft Word, Excel, Outlook and USG Army Information Systems (AIS).</li> <li>Requires excellent organizational skills; with the ability to work under fast paced and adverse conditions.</li> </ul> </li> <li> <strong>Skills:</strong> <ul> <li>Excellent computer, interpersonal, and oral and written communication skills required.</li> <li>Computer skills include a working knowledge of Microsoft Word, Excel, Outlook and USG Army Information Systems (AIS).</li> <li>Requires excellent organizational skills; with the ability to work under fast paced and adverse conditions.</li> </ul> </li> <li> <strong>Supervisory Responsibilities:</strong> <ul> <li>Manages and Supervises a team of movement control specialists and seniors.</li> </ul> </li> <li> <strong>Working Conditions:</strong> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very</li> <li>adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position will be physically located in Iraq in support of LOGCAP.*** The Movement Control Supervisor is responsible for assisting the Transportation Manager with day to day movement control operations. Manages employees within assigned Movement Control Team (MCT). The Movement Control Supervisor must be capable of performing, but not limited to, the following movement control functions: Customer Service; Convoy Briefings; Staging Area Management; Hazardous Materiel (HAZMAT) Documentation Certification is provided by the customer; Movement Control Reports; RFID Management; Document Cargo; Container Management: and Safety Briefings. Employee must be familiar with Transportation Movement Requests (TMR), Transportation Control and Movement Document (TCMD), and regulation that pertain to Movement Control. The Movement Control Supervisor must be Hazardous Materiel (HAZMAT) certified and obtain the ability to utilize and train employees on the Global Transportation Network (GTN), Integrated Booking System-Container Management Module (IBS-CMM), The Movement Control Supervisor must have the ability to utilize and train employees on Radio Frequency Identification (RFID) tags and Transportation Coordinators'- Automated Information for Movement System II (TC-AIMS II). Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Supervises Movement Control Specialists and Seniors. + Processes TMRs, TCMDs, and arranges transportation for moving personnel, equipment, and sustainment supplies. + Processes convoy clearance requests and special hauling permits. + Determines the mode of transportation (air, rail, inland waterway, or highway) for unscheduled moves and commits transportation assets. + Maintains communication with the transport services, shippers, receivers, and if applicable, HN movement control agencies. + Maintains the status of and advise the Movement Control Battalion (MCB) on the location of units, installations, and pipeline take-off points; transportation requirements; availability of modes of transport; shipper and receiver capabilities; trends of asset use capacity and the general transportation movements' situation in their areas. + Assists unit commanders and service representatives on transportation matters. + Assists in carrying out the movement program and directives from higher headquarters. + Coordinates movement from origin to destination and inbound clear movements when required. + Maintains accountability of containers and chassis for other services and commercial carriers and ensuring that they are promptly returned to the appropriate transport system. + Validates transportation requirements, coordinates transportation support, and inbound clearance for moving units, personnel, and cargo. + Perform other duties as assigned. Qualifications + Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be a U.S. Citizen + High School Diploma or Equivalent required. + Secret Clearance: + Ability to obtain and maintain a Secret Clearance. + Preferred Qualification: + Undergraduate Degree is preferred. + Experience: + Five (5) years of related work and supervisory experience. + Excellent computer, interpersonal, and oral and written communication skills required. + Computer skills include a working knowledge of Microsoft Word, Excel, Outlook and USG Army Information Systems (AIS). + Requires excellent organizational skills; with the ability to work under fast paced and adverse conditions. + Skills: + Excellent computer, interpersonal, and oral and written communication skills required. + Computer skills include a working knowledge of Microsoft Word, Excel, Outlook and USG Army Information Systems (AIS). + Requires excellent organizational skills; with the ability to work under fast paced and adverse conditions. + Supervisory Responsibilities: + Manages and Supervises a team of movement control specialists and seniors. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very + adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for an Electrical &amp; Instrument Supervisor ((Iraqi National) to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and&nbsp;<br> standards.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br> &nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for an Electrical &amp; Instrument Supervisor ((Iraqi National) to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and&nbsp;<br> standards.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><i><strong>#Wood #Iraq #Basra #Electrical &amp; Instrument Supervisor</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Electrical &amp; Instrument Supervisor&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production.&nbsp;</p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities.&nbsp;</p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li>Receive and verify all electrical equipment, ensuring conformity to project specifications and standards.</li> <li>Coordinate and schedule equipment deliveries to the site, planning and managing logistics for all electrical equipment.&nbsp;</li> <li>Develop and implement preservation plans for electrical equipment on-site, ensuring proper maintenance until installation.&nbsp;</li> <li>Supervise the installation of all electrical equipment.&nbsp;</li> <li>Coordinate with other disciplines to ensure site readiness, including foundation preparation and electrical interfaces.&nbsp;</li> <li>Be proactive in addressing potential issues and ensuring smooth installation processes.&nbsp;</li> <li>Implement and oversee QA/QC procedures during equipment installation, conducting inspections to ensure compliance with quality standards.&nbsp;</li> <li>Manage and coordinate electrical construction activities, resolving any on-site technical issues.&nbsp;</li> <li>Assist in pre-commissioning and commissioning of electrical systems, ensuring all systems meet performance criteria.&nbsp;</li> <li>Prepare and manage the hand-over of electrical systems, ensuring all documentation is complete and accurate.&nbsp;</li> <li>Interface between interdisciplinary departments and within international teams, ensuring seamless integration of electrical systems&nbsp;</li> <li>Maintain and update technical documentation, including technical reports and specifications.&nbsp;</li> <li>Troubleshoot and resolve electrical issues, providing technical support as needed.&nbsp;</li> <li>Monitor a team of contractor’s electrical technicians, providing guidance and training as necessary.&nbsp;</li> <li>Monitor and control project costs related to electrical work, identifying, and implementing cost-saving measures.</li> <li>Develop and manage electrical work schedules, ensuring timely completion of all electrical activities.&nbsp;</li> <li>Assist in the procurement of electrical equipment and materials, reviewing vendor documentation for compliance.</li> <li>Identify and mitigate risks related to electrical activities, implementing contingency plans as necessary.&nbsp;</li> <li>Manage changes to electrical systems and documentation, evaluating and approving change requests.</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Bachelor’s degree in electrical engineering, 5 to 10 years of experience in the oil industry, with significant experience with SIMOPS works,</li> <li>Strong understanding of Oil &amp; Gas International Codes and Standards,</li> <li>Proactive and team-oriented approach with the ability to work collaboratively across complex project teams. Strong technical and problem-solving skills,</li> <li>Excellent communication and interpersonal skills,</li> <li>Ability to work effectively under pressure, Detail-oriented with strong organizational skills.</li></ul> </div>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><p><strong><span>YOU TACKLE FOR QUALITY AND GREAT SERVICE. THIS WILL IMPROVE THE LIFE OF OUR CUSTOMERS.</span></strong></p><br><br><br><p><span>Would you like to become part of the world's most international company in the world?</span></p><br><br><p><span>A company that pioneered cross-border express delivery in 1969 and is now active in more than 220 countries and territories worldwide. Do you want to be part of a company that connects people worldwide? And the more people we connect, the better life will be on our planet.</span></p><br><br><p><span> <br> Join our team and discover how an international network that's focused on service, quality and sustainability, is able to connect people and improve lives through the power of global trade. And not just for our customers, but for every member of our team too. To learn more about our culture, motivated people and our purpose, please visit www.dpdhl.jobs/express <br> </span></p><br><br><p><span>Do you want to make a difference? Then come to our "Insanely Customer Centric" Team and become a Certified International Specialist!</span></p><br><br><br><br><br><p><strong><span>Overall Role Purpose </span></strong></p><br><br><br><p><span>The Country Manager has overall accountability for the short- and long-term plans that ensure long-term success and profitability of the company.</span></p><br><br><p><span>This will be achieved by building a strong functional team that has the appropriate direction and leadership to ensure that the strategic and operating plans are developed and implemented according to local regional and global strategic direction.</span></p><br><br><br><br><p><strong><span>Your Tasks:</span></strong></p><br><br><p><strong><span>Service:</span></strong></p><br><br><ul><li><span>To enable and manage the achievement of service performance that meets or exceeds customer expectations and differentiates DHL from the competitors.</span></li><li><span>To ensure regional and global service standards are met or exceeded.</span></li></ul><br><p><strong><span>Customer Relations:</span></strong></p><br><br><ul><li><span>To liaise with key and strategically important customers at the appropriate level to ensure customer retention, development and growth of new business.</span></li><li><span>To be sensitive to emerging customers and market requirements.</span></li><li><span>To ensure the improvement of Customer Satisfaction over time through customer service initiatives and strategies delivering best-in-class service</span></li></ul><br><p><strong><span>Representation:</span></strong></p><br><br><br><ul><li><span>To create, maintain and develop a favorable DHL image with its various influential audiences such as NGOs, partners, industry bodies and governments to facilitate the company's growth and development.</span></li></ul><br><p><strong><span>Business Performance &amp; Result</span></strong></p><br><br><br><ul><li><span>To ensure that the annual business plan including revenue, cash flow, profit and service levels are met, and corrective action is taken to rectify any negative variance.</span></li></ul><br><p><strong><span>Direction &amp; Leadership:</span></strong></p><br><br><ul><li><span>Determine local Country/ Country Group short- and long-term strategies and market approach within overall regional context.</span></li><li><span>To provide strong leadership to ensure agreed strategies and goals are communicated and effectively implemented.</span></li><li><span>To contribute to regional direction, ensuring that local environmental factors are taken into consideration in the setting of regional strategies and policies.</span></li><li><span>To regularly and actively chair the Senior Management Team.</span></li></ul><br><p><strong><span>Group Participation:</span></strong></p><br><br><ul><li><span>To ensure close co-ordination of strategic activities with Solutions and Intercontinental business as well as GCS.</span></li><li><span>To actively promote exchange of expertise and communication with other DHL and DPWN units</span></li><li><span>To promote and participate in cross-BU activities and leverages synergies with other DPWN divisions</span></li></ul><br><p><strong><span>Commercial:</span></strong></p><br><br><ul><li><span>To ensure the development of new business and maintenance of existing business in line with the Region’s profitability and growth targets.</span></li><li><span>To ensure revenue yield enhancement and market share growth through the development and implementation of pricing and marketing plans.</span></li><li><span>To ensure sales strategies and enabling tactics, drive both acquisition and retention of revenue throughout the DBU, Regular and Local Advantage revenue channels.</span></li><li><span>To actively monitor the market, ensuring full awareness of competitors’ strategies and actions.</span></li></ul><br><p><strong><span>Operations:</span></strong></p><br><br><ul><li><span>To ensure the provision of the fastest, most reliable and secure global door-to-door express transport service in the market in the most cost-effective manner.</span></li><li><span>To ensure the planning and implementation of strategies to improve service and transit time performance whilst managing costs.</span></li><li><span>To manage the effective implementation and use of appropriate technology in all sections of the service chain, in order to enhance service and improve productivity.</span></li></ul><br><p><strong><span>Information Services:</span></strong></p><br><br><br><ul><li><span>To ensure the provision of professional and stage-of-the-art Information Services, enabling the business to obtain competitive advantage.</span></li></ul><p><strong><span>Human Resources:</span></strong></p><br><br><ul><li><span>To ensure the provision of HR advice and services that drive and reinforce DHL’s culture and business strategies.</span></li><li><span>To ensure the provision of a supportive working environment suitable to achieving business objectives</span></li><li><span>To implement and drive regional and local recognition and reward programs.</span></li></ul><br><p><strong><span>Business Planning:</span></strong></p><br><br><ul><li><span>To develop annual business plans that support the agreed strategies, improve market share and service levels, as well as meeting the expected financial contribution levels to the network.</span></li><li><span>To continually review and improve business processes to improve productivity and add value to DHL services.</span></li></ul><br><p><strong><span>Financial Management:</span></strong></p><br><br><ul><li><span>To ensure the financial wellbeing of the company from a legal, statutory and DHL management perspective.</span></li><li><span>To set, review, and implement capital and revenue budgets.</span></li><li><span>To ensure that cost control programmes are effectively implemented to manage unit costs.</span></li><li><span>To improve liquidity through good capital and debtor management</span></li></ul><br><p><strong><span>Change Management:</span></strong></p><br><br><ul><li><span>To develop and implement change projects based on technological and industry change directions/trends.</span></li><li><span>To drive and implement local integration (Note significant project may take a few years)</span></li></ul><br><p><strong><span>Administration:</span></strong></p><br><br><br><ul><li><span>To ensure the provision of suitable facilities and fleet in compliance with local statutory requirements in a cost-effective manner.</span></li></ul><br><p><strong><span>Organization Climate:</span></strong></p><br><br><ul><li><span>To develop an organizational culture that nurtures and encourages service excellence, quality and a ‘can do’ mindset.</span></li><li><span>To manage the improvement of Employee Satisfaction over time and work towards positioning as an employer of choice.</span></li><li><span>Create a culture of change and continuous improvement to achieve long-term success.</span></li></ul><br><p><strong><span>People Management:</span></strong></p><br><br><ul><li><span>Determine organization structure, roles and responsibility and performance targets for the function.</span></li><li><span>Develop a culture of quality, service excellence (for internal customers), flexibility and cost consciousness.</span></li><li><span>Develop team spirit and multitasking capabilities within the team.</span></li><li><span>Plan, organize and direct an efficient and effective function.</span></li><li><span>Develop IKOs/KPIs with team members and monitor individual performance.</span></li><li><span>Responsible for complying with talent management and performance process.</span></li><li><span>Manage the allocation of appropriate resources and commitment of staff to the achievement of Global, Regional and Country objectives and targets.</span></li></ul><br><br><p><strong><span>Your Profile:</span></strong></p><br><br><ul><li><span>5 to 7 years DHL experience managing large teams of people. In addition to prior experience in at least two core DHL functions at a senior level.</span></li><li><span>Good knowledge of Iraq Market.</span></li><li><span>Broad understanding of all functional aspects of the business and prior experience managing a complete profit and loss entity.</span></li><li><span>High degree of commercial and business acumen and an understanding of the external economic environment and how this may affect DHL's short- and long-term planning</span></li><li><span>Languages: high level of proficiency in </span><span>French, Arabic and English.</span></li><li><span>Highly proficient communication skills, spoken and written.</span></li><li><span>Solid background in the Air Express or Logistics industry.</span></li><li><span>Commercial awareness of the transportation industry, aviation and regulatory issues.</span></li><li><span>Negotiation experience.</span></li><li><span>Presentation skills.</span></li><li><span>Software skills (Microsoft applications, internet user skills, etc).</span></li><li><span>Ability and willingness to travel.</span></li><li><span>Experience in managing significant change programs and working within a matrix environment.</span></li><li><span>Experience of networking among local businesses, government and community leaders.</span></li><li><span>International business experience, working and living in multicultural and multi-racial environments.</span></li></ul><br><br><br><br><p><strong><span>Our Offer:</span></strong></p><br><br><br><ul><li><span>Strong career support in an international environment.</span></li><li>Great culture and colleagues.</li><li>Multifarious benefit program.</li></ul><br><p><span>Do you see a personal challenge in these versatile and responsible tasks? Then apply now!</span></p><br><br><br><p><strong><span>We look forward to receiving your application!</span></strong></p><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible for the supervision of an assigned aircraft or structural firefighting crew on an alternating shift, supervising all assigned crew members in fire ground situations as well as the performance of care and maintenance of apparatus and equipment as defined in the current task order, Performance Work Standard (PWS), and as directed by Vectrus. Responsible for implementing and maintaining all fire protection services related functional standards within their assigned department IAW the Statement of Work. Implements the Fire Chief s comprehensive firefighting program at the assigned installation to ensure compliance with AR 420-1, Army Facilities Management, Chapter 25, Fire and Emergency Services, Local work instructions, and National Fire Protection Association (NFPA) Guidelines.</p><p>This position description is subject to change at any time as needed to meet the requirements of the program or company. Reports to the Assistant Chief of Operations and functions under their direct supervision. Supervises a structural and/or aircraft firefighting crew at assigned fire department to ensure compliance with PWS and all local requirements are met. Assigns, directs, and reviews the work of assigned subordinate employees who assist in carrying out program activities. Ensure timely submittal of CDRL, deliverable, and work product reports pertaining to the operations section as required. Ensure scheduling of required fire protection equipment inspections to comply and meet PWS requirements for the department. Prevents loss of life and minimizes damage to property and the environment from fire by directing fire attack, confinement, salvage, overhaul, ventilation and rescue activities, to include performing emergency medical care and CPR. Protects and preserves evidence at a fire scene and may participate in investigation of fire incidents. Assures that procedures are affected; station logs and other records pertinent to reports, activities, drills, equipment inspections, etc., are maintained properly and submitted within time limits, if required. Maintains current knowledge of the base, its structures, and all systems related to fire protection. Ensures related firefighting duties are accomplished and documented as outlined in the PWS and department work instructions. When aircraft/facility pre-fire plans are outdated, develop and provide updates. Performs required operators maintenance and tests on rescue tools and saws, ground ladders, fire hose, ropes, harnesses and hardware; serviceable inspections of firefighters protective firefighting clothing; and enforces mandated standards for a respiratory protection program for self-contained breathing apparatus (SCBA). Participates in career and proficiency training programs designed to increase technical proficiency of firefighters. Provide and conducts scheduled training as prescribed by the Fire Chief s Annual Training Plan and as scheduled by the Assistant Fire Chief. When first to arrive on-scene, serves as the incident commander of a fire/crash scene until relieved by the Assistant Fire Chief. Determines the best course of action to minimize loss or damage from fires or explosions. Directs the placement of firefighting equipment and personnel to ensure maximum utilization in fire control of aircraft crash/rescue operations. Assesses the fire scene/emergency situation to facilitate fire/rescue operations and to brief the Assistant Fire Chief upon arrival. Leads and directs assigned firefighting crew to provide safe and proper rescue operations of endangered persons. Ensures rescue operations are performed in accordance with established policies and procedures and minimize the risk of additional danger to firefighting personnel and endangered persons. Employs firefighting measures to minimize the loss or damage as a result of fire or explosions. Responds to hazardous material incidents; leads operations level actions, as directed by the Assistant Fire Chief, to establish control of the affected area with minimal risk to response As required and/or assigned, oversees fire alarm communication center operations to ensure all firefighting equipment and personnel are dispatched as required. Ensures that the communications center is manned at all times during the shift. Oversees the checkout of communications equipment at the beginning of the shift. As necessary, details additional personnel in case of short staffing. Maintains constant contact with the communications center during real world emergencies or fire drills. Ensures the maintenance of reference materials such as the NFPA Standards, IFSTA Training Manuals, Lesson Plans, and reviews and provides input to work instructions pertaining to the operations, training, and communications sections of the department. Performs mid-level supervisory personnel management responsibilities. Advises and provides counsel to employees regarding policies, procedures, and directives of management. Explains performance expectations to employees and provides regular feedback on strengths and weaknesses. Holds employees responsible for satisfactory completion of work assignments. Appraises subordinate workers performance ensuring consistency and equity in rating technique Performs other duties and assignments as required or as directed by the Assistant Fire Chief or Fire Chief.</p><p>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well. Heavy work. Exerting up to 100 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 50 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>One year related experience may be substituted for one year of education, if degree is required.</li><li>Must be a U.S. Citizen</li><li>Must be able to pass annual firefighter Occupational Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583</li><li>Certifications: Must possess current DoD (IFSAC/PROBOARD) certifications for: Fire Officer I, Fire Inspector I, Fire Instructor I, Airport Fire Fighter, Hazardous Materials - Operations, and Driver/Operator ARFF and Pumper, Mobile Water Supply</li><li>Must possess current CPR and First Aid First Responder certification</li><li>Required to have IFSAC or Pro-Board Certification</li><li>Undergraduate Degree preferred or equivalent work-related experience</li><li>Minimum of (7) Seven years of related work experience.</li><li>Minimum of three years of leadership experience.</li><li>Preferred: 3 Years experience as a Firefighter Crew Chief</li><li>Working knowledge of Microsoft Office (Word, Excel and Outlook)</li><li>Supervises a shift and crew for response readiness.</li><li>Performs training to his/her crew IAW with Assistant Chief training plan.</li><li>Excellent computer, interpersonal, and oral and written communication skills required.</li><li>Computer skills include a working knowledge of Microsoft Word, Excel, Outlook</li><li>Requires excellent organizational skills; with the ability to work under fast paced and adverse conditions.</li><li>Knowledge of fire protection mission and organization; fire safety requirements and objectives; firefighting and rescue procedures and techniques, firefighter training requirements, firefighting apparatus and equipment, alarm and suppression system operation; water supply systems; hazardous materials.</li><li>Required to have the requisite knowledge to maintain and operate: Fire apparatus firefighting pumps Firefighting/Rescue equipment, to include but not limited to, air, hydraulic, and hand tools Vehicle mounted and portable firefighting pumps Mounted fire suppression systems (Dry Chemical) Attack lines and Master Streams Self-Contained Breathing Apparatus (SCBA)</li></ul><p></p></section>