Electrical Drafts Man Jobs in Iraq

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Senior Reservoir Well Operations Services<br></strong><br> <strong>Job Description</strong><br> <br> <strong>Job Title: Senior Reservoir well operations Services</strong><br> <strong>Location: Basra, Iraq</strong><br> <strong>Rotation: 14/14 or 28/28</strong><br> <strong>Duration: 1 year contract and possibility of extension</strong><br> <br> <strong>Activities:</strong><br> <strong>Main activities</strong><ul><li>Lead the HSE management system implementation to ensure safe, compliant, and incident-free operations aligned with Company</li></ul><br> <strong>HSE Golden Rules.</strong><ul><li>Ensure full compliance with Companies HSE standards, Iraqi regulations, and international standards (ISO 14001 / ISO 45001).</li><li>Define and monitor HSE KPIs and drive continuous improvement initiatives.</li><li>Act as single point of accountability for HSE performance of the 1.2 GW solar plant.</li><li>Conduct risk assessments for all O&amp;M activities.</li><li>Acts as the Deputy RSES onsite</li></ul><br> <strong>Operational activities :</strong> Develop, implement and enforce:<ul><li>Permit to Work (PTW) system</li><li>LOTO procedures</li><li>SIMOPS coordination rules</li></ul><br> <strong>Lead:</strong><ul><li>Incident investigations (including High Potential events)</li><li>Root Cause Analysis (RCA)</li><li>Corrective/preventive action plans</li></ul><br> <strong>Monitor contractor HSE performance:</strong><ul><li>Audit contractor compliance</li><li>Validate method statements and risk assessments</li><li>Enforce HSE clauses</li></ul><br> <strong>Conduct regular:</strong><ul><li>Site inspections</li><li>Safety tours/ Joint safety tours</li><li>HSE audits</li></ul><br> <strong>Ensure environmental compliance:</strong><ul><li>Waste management</li><li>Hazardous materials handling</li><li>Spill prevention</li></ul><br> <strong>Define and deploy emergency response plans:</strong><ul><li>Fire, electrical incidents, extreme weather</li><li>Coordination with local authorities</li></ul><br> <strong>Manage HSE reporting:</strong><ul><li>Daily / weekly / monthly reporting / as needed</li><li>Incident reporting in company systems (MySafety4All etc.)</li></ul><br> <strong>Other activities</strong><ul><li>Promote strong HSE culture and leadership visibility across all teams.</li><li>Develop HSE competency and training programs for local workforce.</li><li>Support operational teams in integrating HSE into maintenance planning.</li><li>Lead safety campaigns and continuous improvement initiatives.</li></ul><br> <br> <strong>Qualifications/Experience required:</strong><ul><li>Bachelor's or equivalent level</li><li>Minimum 10–12 years in HSE in energy / industrial sector</li><li>Minimum 5 years in HSE leadership role</li><li>Experience on large-scale utility projects (&gt;500 MW) preferred</li></ul><br> <strong>Technical Skills</strong>:<ul><li>Renewable energy / solar PV operations</li><li>Middle East HSE practices and regulations</li></ul><ul><li>Strong knowledge of:<ul><li>HSE management systems (ISO 14001 / ISO 45001)</li><li>Power plant / solar PV risks</li><li>Electrical safety (HV/MV/LV)</li><li>PTW / LOTO systems</li></ul></li><li>Experience in:<ul><li>Incident investigation and RCA</li><li>Contractor HSE management</li><li>Risk assessment methodologies</li></ul></li><li>Familiar with:<ul><li>International standards and best practices</li><li>NEBOSH / IOSH (or equivalent) – mandatory</li><li>ISO 45001 / 14001 auditor – preferred</li><li>Electrical safety certification – preferred</li></ul></li></ul><br> <strong>Soft skills:</strong><ul><li>Strong leadership and safety culture advocacy</li><li>Ability to influence and enforce compliance</li><li>High level of rigor and accountability</li><li>Communication in multicultural environments</li><li>English: fluent</li><li>Arabic: mandatory (operational environment)</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Facilities Management Supervisor is responsible to manage a self‐directing, multi‐skilled team to maximize operational availability and efficiency of Facilities Operations to achieve internal and external requirements. This position is responsible in monitoring Planned Preventive Maintenance (PPM) approved by Facilities Management, by reviewing reports, schedules, spare parts required to avoid major breakdown in equipment’s, buildings and to provide efficient service to business partners.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Manages the overall effective and economical use of subordinate personnel, equipment, materials, and methods to meet construction, modification, maintenance, and quality standards of the physical plant while ensuring operational efficiency and service continuity.</p><br> <p>Supervises day-to-day facility maintenance activities and ensures all preventive and corrective maintenance works are completed in accordance with operational requirements, safety standards, and company procedures.</p><br> <p>Leads the planning of the overall use of assigned personnel and other resources (i.e., equipment, facilities, materials, and tools) to accomplish work operations efficiently and within established timelines and budgets.</p><br> <p>Coordinates and monitors the activities of maintenance staff, contractors, and service providers to ensure timely completion of assigned tasks and quality workmanship.</p><br> <p>Conducts regular inspections of facilities, equipment, and maintenance activities to ensure compliance with operational, safety, and maintenance standards.</p><br> <p>Reviews equipment deficiencies, identifies operational issues, and implements corrective and preventive actions to minimize downtime and improve equipment reliability.</p><br> <p>Maintains maintenance records, work orders, inspection reports, and operational documentation to support effective facility management and reporting requirements.</p><br> <p>Supports the implementation of HSE policies, participates in safety inspections, and ensures compliance with company procedures and regulatory requirements across all facility maintenance activities.</p><br><br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>• Knowledge of applicable safety requirements Knowledge in dairy principles and processes.</p><br> <p>• Knowledge of relevant equipment, policies and procedures</p><br> <p>• Knowledge of administrative and clerical procedures for reporting purposes</p><br> <p>• Knowledge of ERP Systems</p><br> <p>• Knowledge of building systems, trades and materials including electrical, plumbing, HVAC, carpentry, painting, flooring and grounds</p><br> <p>• Knowledge of preventative maintenance scheduling techniques</p><br> <p>• ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>7 years of job experience</p><br> <br><br><u><b>Competencies</b></u> <br>Resilience<br>Quality<br>Leadership<br>Preventative Maintenance Procedures L2<br>Building Maintenance L2<br>Contractor Management L2<br>Agility<br>Safety Management L2<br>AI Fluency<br>Inspection And Maintenance Procedures L2<br><br><br><u><b>Education</b></u> <br>Diploma in in any Engineering related discipline (e.g. Mechanical, Electrical)<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Facilities Management Supervisor is responsible to manage a self‐directing, multi‐skilled team to maximize operational availability and efficiency of Facilities Operations to achieve internal and external requirements. This position is responsible in monitoring Planned Preventive Maintenance (PPM) approved by Facilities Management, by reviewing reports, schedules, spare parts required to avoid major breakdown in equipment’s, buildings and to provide efficient service to business partners.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Manages the overall effective and economical use of subordinate personnel, equipment, materials, and methods to meet construction, modification, maintenance, and quality standards of the physical plant while ensuring operational efficiency and service continuity.</p><br> <p>Supervises day-to-day facility maintenance activities and ensures all preventive and corrective maintenance works are completed in accordance with operational requirements, safety standards, and company procedures.</p><br> <p>Leads the planning of the overall use of assigned personnel and other resources (i.e., equipment, facilities, materials, and tools) to accomplish work operations efficiently and within established timelines and budgets.</p><br> <p>Coordinates and monitors the activities of maintenance staff, contractors, and service providers to ensure timely completion of assigned tasks and quality workmanship.</p><br> <p>Conducts regular inspections of facilities, equipment, and maintenance activities to ensure compliance with operational, safety, and maintenance standards.</p><br> <p>Reviews equipment deficiencies, identifies operational issues, and implements corrective and preventive actions to minimize downtime and improve equipment reliability.</p><br> <p>Maintains maintenance records, work orders, inspection reports, and operational documentation to support effective facility management and reporting requirements.</p><br> <p>Supports the implementation of HSE policies, participates in safety inspections, and ensures compliance with company procedures and regulatory requirements across all facility maintenance activities.</p><br><br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>• Knowledge of applicable safety requirements Knowledge in dairy principles and processes.</p><br> <p>• Knowledge of relevant equipment, policies and procedures</p><br> <p>• Knowledge of administrative and clerical procedures for reporting purposes</p><br> <p>• Knowledge of ERP Systems</p><br> <p>• Knowledge of building systems, trades and materials including electrical, plumbing, HVAC, carpentry, painting, flooring and grounds</p><br> <p>• Knowledge of preventative maintenance scheduling techniques</p><br> <p>• ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>7 years of job experience</p><br> <br><br><u><b>Competencies</b></u> <br>Resilience<br>Quality<br>Leadership<br>Preventative Maintenance Procedures L2<br>Building Maintenance L2<br>Contractor Management L2<br>Agility<br>Safety Management L2<br>AI Fluency<br>Inspection And Maintenance Procedures L2<br><br><br><u><b>Education</b></u> <br>Diploma in in any Engineering related discipline (e.g. Mechanical, Electrical)<br><br><br><br> </div>

<p>Foreman for Mechanical, Electrical &amp; Plumbing works for Central Fire Conditioning &amp; Fire Fighting works.</p><p><strong>Desired Candidate Profile</strong></p><p>ITI</p>

<p>Foreman for Mechanical, Electrical &amp; Plumbing works for Central Fire Conditioning &amp; Fire Fighting works.</p><p><strong>Desired Candidate Profile</strong></p><p>ITI</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Description:</b></p><p>Electrical work in builidng construction</p><p>Knowledge &amp; Qualification:</p><p>3years of experience</p><p>Role &amp; Responsibilities:</p><p>Gulf experience is highly preferred</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p><br></p><p></p></section>

<p>Prepare and update electrical shop and as-built drawings, create material take-offs and quantity breakdowns, coordinate with engineers and project teams, ensure drawings comply with approved documents and site requirements using AutoCAD.</p>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq)Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators.MEANINGFUL WORK AND PERSONAL IMPACTAs a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories.Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School diploma</li><li>Extensive diesel generator experience.</li><li>Knowledge of generator parallel systems and switch gear.</li><li>Experience with brazing copper tubing and evacuating and recharging refrigerant.</li><li>Able to obtain and maintain a Secret Clearance.</li><li>US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA).</li><li>Ability to pass CRC to deploy.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Duties and Responsibilities:</b></p><p></p><p>• Coordinate with the Ground Handling Agency and Station Manager for availability, serviceability of required ground support equipment(GPU,Tow</p><p>Bar, Air Starter, etc…).</p><p>• Certify for return to service, as outlined in the Maintenance PPM, the</p><p>maintenance, preventive maintenance, alterations, airworthiness release(when Required) and the Required Inspection Items (RII) if any.</p><p>• If the station is provided with a sub Stores, station Engineer will be</p><p>responsible for the following :</p><p></p><p>i. Administration of the stores.</p><p>ii. Shelf – life of limited items/products.</p><p>iii. Calibrated of gauge Yes( pressure gauges ,torque meters</p><p>, etc…).</p><p></p><p>• All functions related to arrival/departure times, telexes should be coordinated</p><p>With Station Manager (or his alternate).</p><p>• In case of Management decision to change equipment operated through the concerned station for which he is not properly rated, the station Engineer must be released from his function ns and replacement provided until he satisfies the maintenance Management through proper training qualifications &amp;Authorizations.</p><p>• He must carry out any other assignments as directed from the Main Base byHis direct responsible.</p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p><b>Required Educational Level:</b></p><p></p><p>- Bachelor Degree in Aeronautical, Mechanical Engineering or Electrical or</p><p>Aircraft Maintenance Diploma from aviation technical school.</p><p>-Valid JCAA A&amp;P License or Repairman Certificate.</p><p>- Type release on at least on three aircraft type operated by RJ</p><p></p><p><b>Required Experience:</b></p><p></p><p>- He should be holding a lead Mechanic position.</p><p>- He should have seven (7) years aviation experience or five (5) years RJ</p><p>Experience from which one (1) year as a senior Mechanic.</p><p></p><p><b>Required Competencies: </b></p><p></p><p>- Good technical knowledge of aircraft mechanical, power plant and electrical Systems.</p><p>- Good troubleshooting skills.</p><p>- Computer skills.</p><p>- Communication skills and ability to administer people.</p><p>- Quality Oriented.</p><p>-He should be conversant in English language and fully aware of company's</p><p>Polices and procedures.</p><p>-He should be holder of Push back / Towing authorization for the type of</p><p>Aircraft operated through the station.</p><p>- He should be holder of ETOPS release if necessary.</p><p></p><p><b>The Job Location will be in Baghdad, Arbeel and Musel. </b></p></div>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects</li><li>Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of one (1) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines</li><li>Valid Driver s License</li></ul><p>Preferred:</p><ul><li>Degree/Associate Degree in Technical Field or Gas Turbine Systems</li></ul><p>Desired Characteristics:</p><ul><li>Ability to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking</li><li>Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Secret Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.</p><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>The designee shall be qualified to maintain, modify, and repair electrical power generating and control systems, automatic transfer switches, heating, ventilation, air conditioning and refrigeration (HVAC) systems, and associated equipment. Performs scheduled periodic maintenance on systems and components, and adjusts systems to maintain proper voltage, refrigerant levels, current, frequency, and synchronization. Identifies, repairs, and records malfunctions by removing, repairing, and/or replacing defective components.</p> <p>The designee shall maintain systems such as, but not limited to, Cummins generator series DGDK, DSGAB, DGBB, C15D6, C35D6, 125D6D, MEPP series 1050, 1070A, PP-3106A and utilize Cummins InPower software for diagnostics. This designee shall be qualified to work from blueprints, drawings, and operate a variety of electrician’s hand tools and testing instruments.</p> <p>Support various generator/HVAC systems identified in Table 4.5.1 – C2 Systems and Associated Support Equipment; Table 4.5.2 ATCALS Systems and Associated Support Equipment; Table 4.5.3 ATC Weather Systems and Associated Support Equipment; Table 4.5.4 C2 Air Control Squadron O&M Support; Table 4.5.5 Regional Maintenance Center O&M and Support Equipment. Units range from 15 kW to 250 kW power generation and 1 - 5 ton HVAC split and rooftop configurations.</p> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Universal 608 HVAC certification.</li> <li>High school diploma or GED. Formal training on power generating equipment and associated equipment such as military technical training school, vocational college, and/or a four (4) year apprentice program with experience in electrical power production maintenance and repair.</li> <li>Willingness to perform other duties outside the HVAC trade.</li> <li>Computer knowledge to navigate online training, time keeping, and email.</li> <li>Four (4) years of practical experience with equipment the technician will maintain. Six (6) months of Cummins Commercial, Advanced Medium Mobile Power Source (AMMPS) and InPower Software experience required.</li> <li>Ability to lift up to 50 lbs.</li> <li>Ability to do the following for sustained periods of time: stoop, bend, kneel, carry, reach, lift.</li> <li>Ability to work in a fast-paced, constantly changing environment.</li> <li>Ability to obtain and maintain a US CENTCOM Medical Exam.</li> <li>Must be able to obtain and maintain a Secret Security Clearance. Note: US citizenship is required to obtain a Secret Clearance.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Amentum is seeking a Crew Chief/Mechanic III to provide aircraft Maintenance Support, Management, and Leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgement in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts both short term and long term. This person shall have working experience all aspects of flightline, phase maintenance, and Aircrew Life Support Systems.</p><p><b>Knowledge &amp; Skills</b></p><ul><li>Experience providing OJT to technicians.</li><li>Interface with operational customers to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, documents inventory usage, controls workflow.</li><li>Work with other A&amp;P Mechanics and technical representatives to trouble shoot, diagnose and solve unusual and complex maintenance problems.</li><li>Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneudraulic, fuel, electrical/electronic systems, problems.</li><li>Plan and schedule aircraft utilization and maintenance activity and coordinates performance with operational customers.</li><li>Assist in maintaining accurate parts inventory.</li><li>Supervises aircraft jacking, lifting, and towing operations.</li><li>Supervises aircraft and component inspections.</li><li>Interprets inspection findings and determines adequacy of corrective actions.</li><li>Troubleshoot aircraft structures, systems, components, and related equipment.</li><li>Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation.</li><li>Ability to Inspect and operate powered and nonpowered aerospace ground equipment.</li><li>Performs Quality Verification Inspections (QVI) as needed.</li><li>Perform other qualified duties as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).</li><li>High School Diploma, required or general education equivalent (GED).</li><li>Minimum of eight (8) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar Fixed-Wing aircraft is required.</li><li>Must have Aircraft Maintenance and Egress experience.</li><li>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</li><li>Demonstrated leadership ability combined with attention to detail.</li><li>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</li><li>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneudraulic; and mechanical principles.</li><li>Knowledge of sheet metal, properties of materials, fuels, and oils.</li><li>Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li><li>Must have a working knowledge of aircraft safety requirements.</li><li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</li><li>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Role Summary We are seeking a versatile and highly organized Operations &amp; Performance Admin Engineer to join the talabat mart (tMart) team. This hybrid role bridges technical facilities management with data-driven operational performance administration. On the engineering side, you will oversee the maintenance, procurement support, and supplier supervision for dark store facilities, ensuring critical infrastructure like cold chain systems (chillers/freezers) and electrical networks remain fully operational. On the administration side, you will dedicate focus to monitoring, tracking, and reporting the operational health of the dark stores, reviewing ground-level efficiency metrics, and delivering structured compliance dashboards to ensure seamless 30-minute delivery execution. What s On Your Plate? Engineering &amp; Facilities Management: Infrastructure Maintenance: Proactively identify, diagnose, and manage the maintenance and repair needs of essential store infrastructure, including industrial chillers, freezers, HVAC/AC systems, electrical distribution networks, and general facilities. Procurement Documentation: Formulate highly accurate and detailed Scope of Work (SOW) documents and Bill of Quantities (BOQ) for new equipment purchases, facility upgrades, and engineering services. Supplier Supervision: Supervise on-site third-party contractors and service providers during engineering installations, routine maintenance, and emergency repairs, enforcing strict quality and safety standards. Handover &amp; Receiving: Conduct technical inspections and serve as the final authority for the formal receiving and handover of newly executed engineering projects, facilities, or physical assets. Performance Administration: Real-Time Order Flow Monitoring: Maintain a regular order-flow monitoring schedule on the Shopper platform, and actively inform the relevant store team via communication groups in case of any delays in assigning or preparing orders. Nightly Sales Tracking: Create and publish structured sales update tables every night at 7:00 PM, 9:00 PM, 11:00 PM, and 12:15 AM to keep the team informed on performance milestones. Picker Performance Analytics: Check picker performance at the granular order level, calculate efficiency averages, and prepare comprehensive reports to help team leaders optimize speed and accuracy. Customer Feedback Administration: Follow up with the account advisor to aggregate, categorize, and report back on direct customer feedback to identify service delivery bottlenecks. Operational Sheet Management: Maintain and systematically update the central operations Google Sheet for all immediate store-level updates, operational tracking parameters, and system notifications. In-App Quality Control Audits: Perform weekly systematic audits of images on the talabat App, flagging discrepancies, and proactively uploading missing visual assets to guarantee catalog completeness. Barcode Error Tracking: Identify and log non-working barcodes using the specialized operations tracking sheet to minimize order picking delays. Store Invoice &amp; Compliance Audits: Monitor, track, and verify the physical and digital invoices uploaded directly by the store branches to ensure operational data integrity.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Education &amp; Experience:</b></p><p>Bachelor's degree in Mechanical, Electrical, or Industrial Engineering, or a highly related technical field, combined with at least 3+ years of experience across data tracking, performance reporting, facilities engineering, or administrative operations.</p><b>Technical Facility Skills:</b><p>Strong hands-on or supervisory experience identifying maintenance needs for commercial refrigeration (chillers/freezers), HVAC networks, and electrical systems. Proven ability to draft professional SOW and BOQ documents.</p><b>Analytical &amp; Tooling Proficiency:</b><p>Highly data-oriented and structured, with an advanced proficiency in Google Sheets/Excel. Comfortable managing high-volume operational dashboards and catching subtle metric anomalies.</p><b>Execution &amp; Communication:</b><p>Strong communication and reporting skills to seamlessly present daily facilities statuses and weekly performance summaries directly to Operations Management.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for an Instrumentation and Electrical (E&amp;I) TAR Supervisor to join its Iraq business unit for one of our operating clients. This role is a full-time on-site role in Basra, Iraq .</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Amentum is seeking a Crew Chief (Aircraft Mechanic III) to provide aircraft Maintenance Support, Management, and Leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgement in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts both short term and long term. This person shall have working experience all aspects of flightline, phase maintenance, and Aircrew Life Support Systems. Knowledge &amp; Skills Experience providing OJT to technicians. Interface with operational customer to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, documents inventory usage, controls workflow. Work with other A&amp;P Mechanics and technical representatives to trouble shoot, diagnose and solve unusual and complex maintenance problems. Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneudraulic, fuel, electrical/electronic systems, problems. Plan and schedule aircraft utilization and maintenance activity and coordinates performance with operational customers. Assist in maintaining accurate parts inventory. Supervises aircraft jacking, lifting, and towing operations. Supervises aircraft and component inspections. Interprets inspection findings and determines adequacy of corrective actions. Troubleshoot aircraft structures, systems, components, and related equipment. Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation. Ability to Inspect and operate powered and nonpowered aerospace ground equipment. Performs Quality Verification Inspections (QVI) as needed Perform other qualified duties as assigned Experience &amp; Education Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P). Minimum of Ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar Fixed-Wing aircraft is required. Must have Aircraft Maintenance and Egress experience. Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications. Demonstrated leadership ability combined with attention to detail. Must have knowledge of the scope and limitation of various categories of maintenance and their application. Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneudraulic; and mechanical principles. Knowledge of sheet metal, properties of materials, fuels, and oils. Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components. Must have a working knowledge of aircraft safety requirements. Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).</p><p>Minimum of Ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar Fixed-Wing aircraft is required.</p><p>Must have Aircraft Maintenance and Egress experience.</p><p>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</p><p>Demonstrated leadership ability combined with attention to detail.</p><p>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</p><p>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneudraulic; and mechanical principles.</p><p>Knowledge of sheet metal, properties of materials, fuels, and oils.</p><p>Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</p><p>Must have a working knowledge of aircraft safety requirements.</p><p>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Able to obtain and maintain a Secret Clearance. Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.</p><p></p></section>