Equipment operator Jobs

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Field Operator<br><br><p>Under direct supervision, assigned daily work. May explain instructions and documentation to plan work activities. Helps coordinate movement of materials and equipment to work locations and sets up work site. Completes and reviews records, maintains tools and equipment, and performs various clean up activities. Job may require moderate to heavy lifting. Observes and follows all safety rules and procedures, including wearing required personal safety equipment. Requires a high school diploma or equivalent and 2 years of experience.</p><br><br><br><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<p>Operate front-end loaders safely and efficiently. Load trucks, hoppers, conveyors, and storage areas with materials such as sand, gravel, soil, aggregates, ore, or other bulk materials. Transport materials within the worksite while minimizing spillage and equipment wear. Perform excavation, stockpiling, backfilling, and site cleanup as required. Conduct pre-start and post-operation inspections of equipment. Monitor and report equipment defects, malfunctions, or maintenance requirements. Perform routine preventive maintenance, including checking fluid levels, tires, hydraulic systems, and lubrication points. Follow site traffic management plans and all health, safety, and environmental (HSE) procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>High school diploma or equivalent (preferred). Valid heavy equipment operator certification or license, where required. Minimum 2 3 years of experience operating front-end loaders or similar heavy equipment.</p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Field operator (commissioning/startup/operation)</h4> <p><strong>Location:</strong> Basra, Iraq. 28/28 rotation</p> <h4>Role overview</h4> <p>Responsible for monitoring activities across the facility to ensure safe and efficient operation.</p> <h4>Job description</h4> <ul> <li>Leak testing of process and utility systems.</li> <li>Involvement in loop and C&E checks.</li> <li>Commissioning and trial run activities.</li> <li>Lining up and isolation of valves and systems according to startup/shutdown list.</li> <li>Patrolling and monitoring the field for any abnormalities of rotating and static equipment.</li> <li>Monitoring overall parameters.</li> <li>Startup and shutdown activities.</li> <li>Field operations and maintenance activities.</li> <li>Maintaining field log sheet.</li> <li>Communication with DCS operator throughout shift.</li> <li>Manpower handling and focal point for field housekeeping.</li> <li>Maintaining field records.</li> <li>Preparation of daily reports and monthly reports.</li> <li>Maintaining documentation (isolation and de-isolation LOTO).</li> <li>Support other disciplines for the maintenance activities for isolation and de-isolation.</li> <li>PTW handling including manpower and equipment safety.</li> <li>Safe operation of the plant.</li> <li>Ensure that all safety precautions are in place.</li> <li>Emergency response.</li> <li>Carry out any other related duties as and when directed by the supervisor.</li> </ul></p><p></p>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong> We are supporting a leading international Oil &amp; Gas operator in Basra to hire an experienced <strong>Wells Civils Data Engineer.<br></strong><br>This is a unique opportunity to contribute to a long-term, high-impact project, working alongside global experts on one of the region’s most strategic energy developments.<br>With over 1500 workers supporting our clients in Iraq, NES has deep insight into their culture and hiring expectations - allowing us to support candidates effectively throughout the hiring process. <br> <br>Job Description <br>Job Title&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Wells Civils Data Engineer<br>Job Category&nbsp; &nbsp;:Wells - Drilling, Workover and Well Services<br>Location&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp;:Basra (rotational 14:14 subject to change)<br>Role Summary:<br></strong>The Wells Civils Data Engineer reports directly to the Wells Civils Manager. <br>The role is responsible for all data related to civil scope of works for drilling, workovers and well services in the field. As required, may also be responsible for the correlation and updating QAQC &amp; KPI processes.<br>The role is instrumental in maintaining the wells civil databases, strengthening commitment to excellence, operational compliance and efficiency.<strong><strong> <br>Key Responsibilities<br></strong></strong><ul><li>Compile daily contractor reports and prepare the Wells Civils daily report.</li><li>Prepare and correlate the Monthly Dashboard for publication in Power BI.</li><li>Coordinate training requests, manage approvals, send notifications, and track progress.</li><li>Update the Civils Operations Tracker with daily data entries.</li><li>Oversee the Call Out Cost Tracker, ensuring autonomy and accuracy.</li><li>Prepare call outs, input into the cost tracker and send to Civils Team Leader for signatures</li><li>Prepare &amp; issue completion certificates to the Civils Team Leader for required signatures.</li><li>Maintain document controls for the wells folders to ensure all information is current.</li><li>Carry out additional duties as assigned.</li></ul><strong><strong><strong>Qualifications &amp; Experience:<br></strong><br><strong>Essential:</strong><br></strong></strong><ul><li>A minimum of 3 years’ experience in Data Management or a Document Control role within the Oil &amp; Gas industry.</li><li>Demonstrates advanced proficiency in utilizing the Microsoft Office suite of applications.</li><li>Excel expert</li><li>Skilled in MS Project</li><li>English language skills – both written &amp; spoken.</li><li>Arabic Speaker.</li><li>Capable of handling a fast-paced, high-volume work environment with frequent challenges.</li><li>Demonstrated experience in managing dynamic, multi-site operations.</li><li>Strong communicator &amp; team player.</li><li>Attention to detail</li></ul><strong><strong>&nbsp;<br><strong>Preferred:</strong><br></strong></strong><ul><li>A bachelor’s degree in Engineering or a technically related subject is desired or analogous discipline (Scientific).</li><li>International experience preferred Middle East onshore.</li></ul><br> <strong>Why This Opportunity Stands Out:</strong><br>• Long-term project stability (many contractors exceed 10 years)<br>• Exposure to a major global operator<br>• Opportunity to work alongside industry-leading professionals<br><strong> Why Apply Through NES?</strong><br>NES is the world’s leading engineering staffing provider, operating across Oil &amp; Gas, Power, Life Sciences, and infrastructure sectors.<br><ul><li>80+ offices across 45 countries</li><li>24,000+ contractors globally and 10,000+ in the Middle East</li><li>Strong regional presence and long-term client partnerships</li></ul><br> If you find this opportunity matching your skills or if you know someone suitable for the role, please drop your CV on sayali.kothmire@nesfircroft.com<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The main duty of a tower crane operator is to operate equipment used to lift and relocate construction materials, shipping containers or other heavy objects.</p><p>Depending on where they work, operators may also need to gain licensure and certification.</p><p><strong>Desired Candidate Profile</strong></p><p>Apprenticeship programs combine classroom learning with hands-on training, and they are offered at vocational schools and community colleges. Trade organizations, such as the International Union of Operating Engineers, may also provide apprenticeship opportunities. In these programs, students review topics such as government regulations and policies, wire rope and rigging, hazardous materials procedures, hand signals and radio communications. Most programs allow students to handle actual equipment, including crane equipment and boom trucks. Students must earn a certain number of hours in the classroom and in the field to complete the program. An examination is required, too, before an individual may be classified as a journey-level worker.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><b>Job Description:</b></p><p>To work as a Scaffolder Lead Hand.</p><p><b>Knowledge &amp; Qualification:</b></p><p>Civil Construction site Experienced.</p><p><b>Role &amp; Responsibilities:</b></p><p>Unloading scaffolding equipment on-site.&nbsp;</p><p>Ensuring a stable base for scaffolding.&nbsp;</p><p>Erecting scaffolding poles.&nbsp;</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Civil Construction site Experienced.</p><p></p></section>

<p>1. Operate all types of GSE including Pushback Tractors, Main Deck Loaders, Pallet Container Loaders (PCLs), Passenger Stairs, Passenger Buses, Baggage Tractors, GPU, ASU, ACU, Water & Lavatory Units, Forklifts, and Tow Bars as per flight requirements. 2. Perform pre-use inspection, fluid level checks, brake tests, and safety function tests prior to operation. 3. Maintain strict compliance with ramp safety, FOD control, PPE requirements, and aircraft safety zones. 4. Execute precise aircraft pushback and towing operations under the direction of the Turnaround Coordinator (TRC) / Flight Operations Officer (FOO). 5. Ensure accurate equipment positioning during aircraft arrival, departure, loading and unloading operations. 6. Report immediately any equipment defect, incident, or safety observation to the Equipment Operator Supervisor and OCC. 7. Maintain proper parking, shutdown, and securing of equipment post use. 8. Support emergency response, aircraft towing, salvage or VIP movements as required. 9. Assist the Workshop Officer during scheduled preventive maintenance or functional checks. 10. Record all equipment usage details accurately in GSE logbooks or digital systems. 11. Attend all safety briefings, OJT programs, and skill refresher trainings as scheduled. 12. Mentor and guide newly inducted Equipment Operators (Grade 2 & 3) during familiarization phases.</p><p>Education • Secondary School Certificate or equivalent Experience • Minimum 10 years in airside operations with at least 3 years operating Pushback Tractors and MDL Language Skills • Basic English (mandatory); Arabic (advantage) Training Requirements: • Ramp Safety • Human Factors • Advanced Equipment Operation (All GSE including Pushback & MDL) • Airside Driving Permit (ADP) Training • AVSEC Level 1 • SMS Awareness • Emergency Response Procedures (ERP) • Fire Safety & First Aid • Towing & Pushback Operations Certification • GSE Preventive Maintenance Awareness</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently looking for&nbsp; dynamic, and self motivated Food &amp; Beverage professionals who want to move their careers forward.<br><br>As part of the team, some of the key responsibilities will include:<br><br>• Clean food processing facilities, storage rooms, walk in fridge’s, kitchen utensils, immediate corridors and holding areas as well as the operation equipment<br>• Work in close cooperation with all kitchen and service employees<br>• Work as per duty schedule and shifts<br>• Perform all stewarding tasks as per given instructions<br>• Ensure minimum wastage, breakage and spoilage</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently looking for&nbsp; dynamic, and self motivated Food &amp; Beverage professionals who want to move their careers forward.</p> <p>This position is based at Slemani Rotana<br><br>As part of the team, some of the key responsibilities will include:<br><br>• Clean food processing facilities, storage rooms, walk in fridge’s, kitchen utensils, immediate corridors and holding areas as well as the operation equipment<br>• Work in close cooperation with all kitchen and service employees<br>• Work as per duty schedule and shifts<br>• Perform all stewarding tasks as per given instructions<br>• Ensure minimum wastage, breakage and spoilage</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver's license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical Maintenance Mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical Maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required by employer and customer for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience: <ul> <li><strong>Electrical maintenance mechanic:</strong> Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools). Ability to read electronic schematics. O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> <li><strong>Networking, IT & information systems:</strong> Two years’ experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered. CCIE certification with fiber optic certification is preferred.</li> <li><strong>Mechanical maintenance:</strong> Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required. O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes, aerial lift, forklift, industrial generator sets.</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision from the Production Manager,</p><br> <ul> <li>The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields.</li> <li>Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies.</li> <li>Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team.</li> <li>Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment.</li> <li>Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques.</li> <li>Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment.</li> <li>Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs.</li> <li>Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems.</li> <li>Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards.</li> <li>Develops and maintains good working relationships with Production Team through effective communication and teamwork.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply.</li> <li>Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</li> </ul><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210433&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position will require 6-week 34M training TDY to Elizabeth City, South Carolina. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required. Ability to read electronic schematics. O&amp;M of electro-mechanical equipment to include one or more of the following: Hydraulic/servo valves Hydraulic actuators, control systems Test and diagnostic equipment</li><li>2) Networking, IT &amp; information systems Two years experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered. CCIE certification with fiber optic certification is preferred.</li><li>3) Mechanical Maintenance Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required. O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul><li>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li><li>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</li><li>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</li></ul><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment such as boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one year previous aerostat experience or two years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools).</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT and information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend, stoop, and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch and reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p> <p>Position requires a six-week 34M training temporary duty assignment (TDY) to Elizabeth City, South Carolina.</p></p><p></p>

<p>The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects</li><li>Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of one (1) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines</li><li>Valid Driver s License</li></ul><p>Preferred:</p><ul><li>Degree/Associate Degree in Technical Field or Gas Turbine Systems</li></ul><p>Desired Characteristics:</p><ul><li>Ability to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking</li><li>Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>