Forklift Drivers Jobs in Iraq

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Position will require 6-week 34M training TDY to Elizabeth City, South Carolina. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>At least one (1) year previous Aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li><ul><li>1) Electrical Maintenance Mechanic Possess at least two (2) year s aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an AEROSTAT system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required. Ability to read electronic schematics. O&amp;M of electro-mechanical equipment to include one or more of the following: Hydraulic/servo valves Hydraulic actuators, control systems Test and diagnostic equipment</li><li>2) Networking, IT &amp; information systems Two years experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network + or Comp T Certification) will be considered. CCIE certification with fiber optic certification is preferred.</li><li>3) Mechanical Maintenance Mechanical Maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an AEROSTAT system or a related industry/military equivalent is required. O&amp;M of mechanical equipment to include one or more of the following: Hydraulic systems, Winch systems, Tether/cable handling systems, Industrial generator sets, Power switch gear, HVAC, Cranes Aerial lift , Forklift , Industrial generator sets</li></ul><li>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li><li>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</li><li>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</li></ul><p></p></section>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators and user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment such as boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one year previous aerostat experience or two years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools).</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT and information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: <ul> <li>Hydraulic systems</li> <li>Winch systems</li> <li>Tether/cable handling systems</li> <li>Industrial generator sets</li> <li>Power switch gear</li> <li>HVAC</li> <li>Cranes, aerial lift, forklift</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend, stoop, and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch and reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p> <p>Position requires a six-week 34M training temporary duty assignment (TDY) to Elizabeth City, South Carolina.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) / Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have experience on 34M aerostat.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <p><strong>1) Electrical maintenance mechanic</strong></p> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>Operations and maintenance of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <p><strong>2) Networking, IT & information systems</strong></p> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO Network Administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a Network Installation (BICSI or Network+ or Comp T Certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <p><strong>3) Mechanical maintenance</strong></p> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>Operations and maintenance of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes, aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Duties</h4> <p><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></p> <p><strong>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</strong></p> <p><strong>Provide oversight of all material handling and heavy equipment support operations.</strong></p> <p><strong>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</strong></p> <p><strong>Schedule daily work assignments of personnel.</strong></p> <p><strong>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</strong></p> <p><strong>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</strong></p> <p><strong>Provide reports and data - both required and ad hoc.</strong></p> <p><strong>Ensure adequate supplies and materials are ordered for department.</strong></p> <p><strong>Ensure personnel are properly trained in equipment operation.</strong></p> <p><strong>Monitor and evaluate performance of personnel.</strong></p> <p><strong>Perform additional duties and projects as assigned.</strong></p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payloads, communications and navigation systems, as well as associated support equipment including boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Additional responsibilities include performing analyses of system operations. Candidates must have:</p> <ul> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <p>Candidates will perform user-level maintenance functions including performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government clearance. US citizenship is required to obtain a Secret clearance.</li> <li>At least one year previous aerostat experience.</li> <li>Certified and school trained on 34M and 74K.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p>Knowledge &amp; Skills Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Additional responsibilities include performing analyses of system operations and candidates must have:</p><p>Knowledge of and experience in the operations of hardware systems and components. Experience in fault detection, isolation, and correction of hardware systems and individual components. Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards. Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p><p>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</p><p>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</p><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. #TAMOD</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain a Secret Clearance.</li><li>At least ONE (1) year previous Aerostat experience.</li><li>Certified and school trained on 34M and 74K.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations.</li></ul><p></p></section>

<p><h4>Principal accountabilities</h4> <p>Interpret written instructions and specifications.<br> Plan and lay out work to be completed.<br> Use a variety of machinist's hand tools and precision measuring instruments.<br> Set up and operate standard machine tools.<br> Responsible for the shaping of metal parts to close tolerances.<br> Make standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining.<br> Perform other qualified duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent.<br> U.S. military technical school or specialized training course is desired, certification of education level.<br> Four (4) or more years’ machinist experience with repair, modification, maintenance, and overhaul of equipment related to individual specialty codes within the past six (6) years.<br> Must be in possession of a valid U.S. passport valid for 2 years and 6 blank pages at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.<br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge & skills</h4> <p>Knowledge of the working properties of common metals, selecting standard materials, parts, and equipment required for this work.<br> Knowledge of fitting and assembling parts into mechanical equipment.<br> Requires rounded training in machine-shop practice, usually acquired through a formal apprenticeship or equivalent training and experience.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test qualification.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in normal office environment, maintenance shop, or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p> <h4>Compensation details</h4> <p>Not applicable.</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Original posting</h4> <p>06/17/2026 - Until filled<br> The company anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>The company is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Build and install iron or steel girders, columns, and other construction materials to form buildings, bridges, and other structures. Cut, position, and bolt down steel bars to reinforce concrete. Repair older infrastructure. Make, weld, and cut structural metal in fabricating shops. Erect steel frames. Direct operation of cranes to move structural steel, reinforcing bars, and other materials onto and around the construction site. Connect steel columns, beams, and girders. Drill holes into steel for bolts. Number steel according to assembly instructions. Unload and stack steel. Attach cables to steel and then to the crane. Hoist steel into place in the framework. Position steel with connecting bars and spud wrenches. Work with driftpins to align the holes in the steel with the framework holes. Use plumb bobs, levels, and laser equipment to check alignment. Bolt or weld piece into place. Set reinforcing bars into forms to hold concrete. Fasten bars together with wire. Place spacers under rebar to lift bars off deck. Cut bars with metal shears and torches. Reinforce concrete with welded wire fabric. Substitute cables for rebar. Tighten cables with jacking equipment. Install stairs, handrails, or curtain walls. Make sure all pieces are fitted properly and complete repairs as necessary. The workers should be experienced and comfortable working at heights too.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have experience in large construction projects like ( large buildings, stadiums, bridges, refineries, fuel farms and offshore oil rigs). The candidates should have long experience in Gulf in Mega steel structural projects.</p><p></p></section>

<p>Riggers are highly specialized in moving jobs that cannot be accomplished by ordinary means and use equipment expressly designed for moving and lifting objects weighing hundreds of thousands or even millions of pounds or kilograms in places where ordinary material handling equipment cannot go. He/she performs assignments, as directed by the crew chief or field supervisor, involved in the installation of power plants, facilities, and new oilfield pumping units and maintenance/inspections of existing oilfield pumping units. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Signal or verbally direct workers engaged in hoisting and moving loads, to ensure safety of workers and materials.</li><li>Test rigging to ensure safety and reliability.</li><li>Attach loads to rigging to provide support or prepare them for moving, using hand and power tools</li><li>Select gear such as slings, shackles, chokers and winches, per load weights and sizes, facilities, and work schedules.</li><li>Control movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment.</li><li>Tilt, dip, and turn suspended loads to maneuver over, under, and/or around obstacles, using multi-point suspension techniques.</li><li>Manipulate rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment.</li><li>Clean and dress machine surfaces and component parts.</li><li>Attach pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps</li><li>Dismantle and store rigging equipment after use.</li><li>Use proper rigging apparatus (i.e. chains, slings and ropes) and techniques to ensure safe and proper lifting is performed.</li><li>Work in adverse weather conditions including high and low temperatures and windy conditions</li><li>Ensure that safety is included in all aspects of each job he/she performs.</li><li>Use this position to influence operational personnel and visitors to do the same.</li><li>Demonstrate support / use of JSAs for every task and actively assist the work group when they are developed.</li><li>Attendance of all scheduled safety meetings and training.</li><li>Participate in regular scheduled audits of equipment and tools.</li><li>Identifying sub-standard acts and near misses.</li><li>Assist in all safety and environmental incident investigations to help determine root cause.</li><li>Ensure that he complies with the required STOP Observations and Near Miss Programs</li><li>Perform other duties as assigned</li><li>Travel extensively (internationally and domestically)</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience :</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Basic English language skills are required.</li><li>High School Diploma and related mechanical experience (carpentry, lifts, cranes, etc.)</li><li>Rigger / Auxiliary Moving &amp; Material Handling Equipment Certifications highly desired but not required</li></ul><p><strong>Desired Characteristics:</strong></p><ul><li>Experience of power generation (gas/steam turbines) and associated auxiliary equipment</li><li>Application of the Correct Rigging Tackle (ie Capable of Safely Lifting the Specified Loads)</li><li>Identification of Specific Shackles and Beam Clamps</li><li>Color Codes of Lifting Slings or Wires be they Belt Slings or Endless Bag Slings and or Wire Strops</li><li>Safety Mandatory Emergency Stop Signals</li><li>Able to Understand and act upon the Basic Safe Systems of Work and Method Statement showing any Approved Rigging Studies.</li><li>Overhead Crane Operation be it Pendant or Cab or Remotely Operated.</li><li>Working knowledge of Forklift, Tele Handler, Scissor Lift, Cherry Picker, Tractor (Tractor Cottil with lifting Arm), O/H Crane, etc.</li></ul>

<p>The Horizontal Foreman will be based at Baghdad Embassy Compound (BEC) Amentum site in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for managing the daily work assignments of Material Handling and Heavy Equipment Operations and will report to the Operations and Maintenance Manager.</p><p>The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Provide oversight of all material handling and heavy equipment support operations.</li><li>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</li><li>Schedule daily work assignments of personnel.</li><li>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</li><li>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</li><li>Provide reports and data - both required and ad hoc.</li><li>Ensure adequate supplies and materials are ordered for department.</li><li>Ensure personnel are properly trained in equipment operation.</li><li>Monitor and evaluate performance of personnel.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum Acceptable Experience Level: Two (2) years experience with Horizontal Earthwork and Material Handling Equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</li><li>Knowledge, Skills, and Abilities:<ul><li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li><li>Knowledge of proper loading techniques and forklift weight capacities.</li><li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li><li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li><li>Prior experience in working with a multi-national workforce</li><li>Ability to extract information to produce reports.</li><li>Ability to communicate with a wide variety of colleagues and customers.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul></li><li>Education: A high school diploma or GED.</li><li>Passport, Licenses and Certifications: As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license from Home of Record.</li><li>Security Vetting: Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li><li>Relevant overseas contract experience.</li><li>Previous work experience in harsh environmental conditions are a plus.</li><li>Experience working with Amentum.</li></ul>

<p><h4>Duties</h4> <ul> <li><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></li> <li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li> <li>Provide oversight of all material handling and heavy equipment support operations.</li> <li>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</li> <li>Schedule daily work assignments of personnel.</li> <li>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</li> <li>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</li> <li>Provide reports and data - both required and ad hoc.</li> <li>Ensure adequate supplies and materials are ordered for department.</li> <li>Ensure personnel are properly trained in equipment operation.</li> <li>Monitor and evaluate performance of personnel.</li> <li>Perform additional duties and projects as assigned.</li> </ul> <h4>Required</h4> <p>Minimum acceptable experience level: Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <h4>Knowledge, skills, and abilities:</h4> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit / 50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Ensure data accuracy and update of equipment inventory database.</p> <p>Ensure that related data processing activities meet the requirements.</p> <p>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</p> <p>Review, reconcile, adjust and process all inventory transactions.</p> <p>Process Survey Reports for all missing equipment.</p> <p>Process and coordinate equipment transfers.</p> <p>Perform positive verbal and written communication skills with all internal and external customers.</p> <p>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Minimum of 3 years’ experience supporting a DOD or DOS program exposure, at least two (2) years’ of international experience.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED (General Education Diploma).</p> <p><strong>Passport, licenses and certifications:</strong></p> <ul> <li>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li> <li>Valid drivers’ license.</li> </ul> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and drug examinations as required by the employer and customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Department of State experience.</li> <li>Five to seven years’ of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li> <li>Experience working with the employer.</li> </ul> <h4>Other knowledge, skills and abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Acceptable Experience Level: Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Knowledge, Skills, and Abilities:</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>Education: A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>Passport, Licenses and Certifications:</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Security Vetting: Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment. Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><b>DUTIES:<br></b><br>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br><br>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.<br><br>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br><br>Ensures data accuracy and update of equipment inventory database.<br><br>Ensure that related data processing activities meet the requirements.<br><br>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.<br><br>Review, reconcile, adjust and process all inventory transactions.<br><br>Process Survey Reports for all missing equipment.<br><br>Process and coordinate Equipment Transfers.<br><br>Perform positive verbal and written communication skills with all internal and external<br><br>customers.<br><br>Assist in a broad scope of direct and indirect support activities involving customer owned<br><br>equipment as necessary to complete assigned tasks.<br><br>Perform additional duties and projects as assigned.<br><b><br>REQUIRED</b>:<br><br>Minimum Acceptable Experience Level: Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.<br><br>Knowledge, Skills, and Abilities:<br><br>Prior proven experience in Property Disposal operations with Defense Reutilization<br><br>Management Operations (DRMO), Hazmat experience.<br><br>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach<br><br>Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.<br><br>Experience with cutting torches to include Plasma cutters.<br><br>Commitment to maintaining a high performance team which delivers customer service excellence.<br><br>Knowledge of principles and processes involved in supporting contract<br><br>responsibilities at an overseas facility.<br><br>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.<br><br>Cross-cultural sensitivity with an international perspective.<br><br>Excellent organizational and time management skills.<br><br>Computer skills, specifically in Microsoft Word and Excel.<br><br>Ability to become an active and functioning member of a team.<br><br>Ability to be innovative and be an agent for change.<br><br>Expert communication skills to facilitate and disseminate information.<br><br>Education: A high school diploma or GED (General Education Diploma).<br><br>Passport, Licenses and Certifications:<br><br>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.<br><br>Valid drivers license<br><br>Security Vetting: Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.<br><br>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.<br><br>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.<br><b><br>DESIRED</b>:<br><br>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.<br><br>Department of State experience.<br><br>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.<br><br>Experience working with Amentum.<br><b><br>OTHER KNOWLEDGE, SKILLS AND ABILITIES:<br></b><br>Knowledge of the principles and processes involved in Quality Control Management.<br><br>Successful management of multiple sites in geographically dispersed locations.<br><br>Ability to collect, analyze and summarize data and to prepare clear and concise reports.<br><br>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.<br><br>Exercise sound judgment and make decisions independently.<br><br>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment. Expert communication skills to facilitate and disseminate information.<br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, <br> The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. <br> Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. <br> Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. <br> Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. <br> Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. <br> Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. <br> Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. <br> Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. <br> Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. <br> Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. <br> Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under general supervision from the Production Manager, The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields. Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies. Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team. Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment. Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques. Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment. Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs. Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems. Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards. Develops and maintains good working relationships with Production Team through effective communication and teamwork.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply. Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>Under general supervision from the Production Manager,</p><br> <ul> <li>The Production Supervisor works in a multi-discipline Asset Operations Team to develop potentially large and challenging unconventional plays and mature oil and gas fields.</li> <li>Identifies innovative ways to apply HAL technology, service capability and expertise within the context of understanding the reservoir, production and facilities to design new, step-change field exploitation methodologies.</li> <li>Integral member of the multi-discipline Production Team comprised of a reservoir engineer, production geologist and field personnel team.</li> <li>Analyzes production history, well files, production equipment and decline curve analysis and nodal analysis of well performance to estimate remaining recoverable reserves, production and cost of upgrading equipment.</li> <li>Selects and implements production technology, service capability and expertise including completion systems comprised of tubing selection, perforating, sand control and fine migration, matrix stimulation, water control and hydraulic fracturing; artificial lift equipment comprised of sucker-rod lift, gas lift, electrical submersible pumps, subsurface hydraulic pumps, progressing-cavity pumps and plunger lift; real-time surveillance and monitoring systems and waterflooding and other enhanced recovery techniques.</li> <li>Uses decline curve analysis and nodal analysis to identify workovers or recompletions candidates and to select and upgrade production equipment.</li> <li>Focuses on maintaining and increasing daily production through optimizing well performance and field operations while controlling operating costs.</li> <li>Performs daily field operations including optimizing well behavior, production, water disposal, chemical injection and treatment, waterflood performance and artificial lift systems.</li> <li>Evaluates proposed modifications to equipment or to operating procedures to improve safety, efficiency and reliability of equipment and ensures all modifications meet statutory and Company standards.</li> <li>Develops and maintains good working relationships with Production Team through effective communication and teamwork.&nbsp;</li> </ul><br><br><b>Qualifications</b> <br><ul> <li>Requires excellent communication skills and the ability to work closely with geologists, engineers, contractors and asset teams to successfully execute projects from concept to operation; over time, incumbent will become very knowledgeable of HAL technologies and solutions experience together with the exploitation methodologies and technologies that other companies apply.</li> <li>Requires an undergraduate degree and a minimum of eight (8) years of industry experience. Degree in geology or engineering is preferred.</li> </ul><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210433&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Operations&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Pick, pack, and load goods accurately based on customer orders and store replenishment needs. Receive, unload, and inspect incoming goods from suppliers. Store products in designated warehouse locations. Perform regular stock checks and inventory counts. Maintain a clean, organized, and safe warehouse environment. Follow company procedures and health &amp; safety guidelines.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>High school diploma or equivalent preferred. Previous warehouse experience is an advantage. Basic knowledge of warehouse operations and inventory handling. Ability to lift and move goods safely. Reliable, hardworking, and able to work in a team.</p><p></p></section>