Hydraulic Technician jobs in Iraq

<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials.</p><p>• Perform other qualified duties as assigned.</p><p>Knowledge &amp; Skills</p><p>• Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</p><p>• Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</p><p>• Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</p><p>• Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</p><p>• Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</p><p>• Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</p><p>• Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</p><p>• Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</p><p>• Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</p><p>• Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</p><p>• Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</p><p>• Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</p><p>• Ability to provide technical support to structural/mechanical engineers and customers.</p><p>• Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</p><p>Physical Requirements/Working Environment</p><p>• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</p><p>• Must be able to climb stairs, ramps, ladders, and work stands</p><p>• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</p><p>• May be required to lift heavy objects whose weight may exceed 50 pounds</p><p>• Must be able to type using a standard keyboard to communicate through e-mail and various software applications</p><p>• Will handle dirty parts and lubricants</p><p>• Will be required to wear proper Personal Protective Equipment (PPE)</p><p>• Must be able to pass a Respirator Physical and Fit Test qualification</p><p>• May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</p><p>• Must be able to lift/push/pull minimum of 50 pounds</p><p>• May work in maintenance shop or outside</p><p>• Must be able to work in a shop where the environment is drafty, noisy, and dirty</p><p>• May be exposed to extreme noise from operating equipment</p><p>• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements :</p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Iraq Visa</li></ul>

<p>The GSE Electrician Technician is responsible for performing electrical preventive, corrective, and emergency maintenance on all Ground Support Equipment across the airport. This includes 12V/24V/48V DC systems, AC electrical systems, control panels, sensors, alternators, starters, wiring harnesses, ECUs, and electrical components related to diesel/electric GSE. The role ensures the electrical systems of all GSE units are reliable, safe, and operational to support continuous airport operations. o Performs electrical maintenance and repair of all GSE electrical systems, including: o GPUs (400Hz/28V DC) electrical circuits o ASU electrical systems o Pushback tractors electrical/electronic components o Belt loaders, baggage tractors, and high-lift trucks o Lavatory/water trucks electrical systems o Battery-operated GSE o Troubleshoots electrical faults related to: o Fuses, relays, connectors o Alternators, starters, batteries o Controllers, ECUs, sensors o Switches, actuators, solenoids o Diagnoses electronic and CAN-BUS communication issues (if applicable). o Performs battery maintenance, load testing, and replacement. o Reads and interprets electrical diagrams, wiring schematics, and service manuals. o Uses multimeters, clamp meters, diagnostic scanners, and test equipment effectively. o Assists in overhauls, rebuilds, and electrical refurbishment of older GSE units. o Ensures electrical components are installed correctly and safely. o Supports installation of lighting, safety beacons, alarms, and electrical accessories on GSE. o Completes service reports, checklists, and work orders accurately. o Ensures electrical systems comply with OEM standards and airport safety rules.</p><p>A skilled Electrical Technician with 2-3 years of experience in GSE, heavy vehicles, or industrial equipment maintenance, possessing strong expertise in electrical troubleshooting, batteries, charging systems, wiring, and electronic controls. The candidate should be capable of independently diagnosing and repairing faults while ensuring equipment availability, operational reliability, and compliance with airport safety standards. Education: Diploma in Electrical Engineering Technology or Automotive Electrical Systems. Experience: Minimum 2–3 years of experience in electrical maintenance on GSE, heavy vehicles, or industrial equipment. Strong knowledge of DC/AC automotive electrical systems. Experience in fault finding, wiring, and control systems. Training Requirements: GSE Electrical Systems Training (OEM preferred) , Battery Maintenance & High-Amperage Safety, Airside Driving & Safety (recommended) Computer Skills: MS office Language Skills: Arabic and English Behavioral Competencies: • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • GSE Electrical Systems • Technical Reporting and Documentation</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Instrument Technician<br><br><p>Under direct supervision, independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adaptations and modifications. With additional experience within one functional area, assists in the design of larger and more complex assignments which involve conventional types of plans, investigations and surveys with relatively few complex features for which there are precedents. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering.</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Instrument Technician<br><br><p>Under direct supervision, independently evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adaptations and modifications. With additional experience within one functional area, assists in the design of larger and more complex assignments which involve conventional types of plans, investigations and surveys with relatively few complex features for which there are precedents. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering.</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for an <strong>Instrument Advisor</strong> to join its Iraq business unit focusing on delivering and driving national technician coaching, mentoring, assessment &amp; development in instrumentation and control.&nbsp;<br> This is a full-time onsite position in Basra, Iraq.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is currently recruiting for an <strong>Instrument Advisor</strong> to join its Iraq business unit focusing on delivering and driving national technician coaching, mentoring, assessment &amp; development in instrumentation and control.&nbsp;<br> This is a full-time onsite position in Basra, Iraq.</p><br><p><i><strong>#Wood #Iraq #Basra #Instrument Advisor</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;<strong>Instrument Advisor</strong> to join our&nbsp;Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This project is to focus more resources towards improving maintenance and reliability on the Oil, Gas &amp; Water Systems, required to efficiently support maintenance, turn arounds and engineering organizations with the appropriate qualifications and experience.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li></ul><p><strong><u>Key Objectives</u></strong></p><br><ul> <li>Deliver and drive national technician coaching, mentoring, assessment &amp; development in instrumentation and control.</li> <li>Accountable for the safe execution of maintenance activities.</li> <li>Assists and guides Local Instrument Supervisors/Technicians in the maintenance (Preventive &amp; Corrective) activities of all I&amp;C equipment.&nbsp;</li> <li>Assist in developing I&amp;C maintenance scope of work and review of maintenance routines and make recommendations on improving.</li> <li>Analyse equipment failures and prepare reports regarding findings on cause of failures. Assists the local site teams in the development of action plans for remediation of I&amp;C failures and follows up on implementation of agreed actions.&nbsp;</li> <li>Monitors and ensures compliance with HSE policies and procedures. Is an Active participant and champion of behaviour based safety within area of responsibility. Ensures that I&amp;C systems on facilities are maintained and operated in a safe and environmentally sound manner that complies with all applicable local laws and regulations and in accordance with company guidelines and policies.</li> <li>Support implementation of Maintenance Procedures, Task Lists both preventive and corrective into CMMS.&nbsp;</li> <li>Review equipment spare parts requirements, holdings of materials and special tools. Recommend stock levels and purchases where deficiencies/shortages are found.&nbsp;</li> <li>System software, hardware and healthcare management&nbsp;</li> <li>Ensuring all instrumentation &amp; control design changes are captured by the change control process&nbsp;</li> <li>Engaging with instrument design personnel and other disciplines as required in the production of engineering and design deliverables&nbsp;</li> <li>Supervises shutdown and turnaround maintenance activities, executes modifications and commissioning of expansions for new plant activities</li> <li>Prepares turnaround and modular shutdown plan and material requirement for instrumentation and control systems</li> <li>Supervising, maintaining, testing, installation and repairing of Control Systems on site (Emerson, ABB, Schneider, Rockwell Allen Bradley Plc’s) - I&amp;C Vendor interface.</li> <li>Support Work Pack Development and closure of&nbsp; Completions documentations&nbsp;</li> <li>Support Root Cause Failure analysis, I&amp;C Breakdown support, I&amp;C Maintenance WO Review, I&amp;C Material Technical Evaluation</li> <li>Carry out HSE and technical audits and inspections as directed by Deputy E&amp;I Maintenance Manager</li> <li>Compile / distribute comprehensive reports as necessary</li></ul><p><strong>Role Intent:</strong></p><br><ul> <li>Deliver and drive national technician coaching, assessment &amp; development in instrumentation and control, maintenance best practices and hazardous area Ex equipment maintenance.&nbsp;</li> <li>Ensure that appropriate preventative and corrective maintenance is carried out in accordance with manufacturers’ specifications and maintenance departments standards.&nbsp;</li> <li>Support national maintenance teams in preventative and corrective maintenance.&nbsp;</li> <li>Makes recommendations for modifications to existing plant I&amp;C equipment as required.&nbsp;</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Above 10 Years experience in O&amp;G industry</li> <li>HNC (preferably degree) in I&amp;C Engineering or equivalent&nbsp;</li> <li>This position requires personnel to be trained in CompEX or recognised equivalent - Maintenance of equipment for use in hazardous areas</li> <li>Knowledgeable in Maintenance mythologies.</li> <li>Training &amp; Mentoring of local nationals&nbsp;</li> <li>An experienced engineer with demonstrated ‘hands on’ technical ability but equally with a keen interest and talent for teaching and coaching in a multicultural environment.&nbsp;</li> <li>Excellent communication skills, well-developed interpersonal skills, self-motivated and able to work with the minimum of supervision with a strong sense of team involvement in a multi-cultural environment.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Production Operations Technician<br><br><p>Fabricates metallic and nonmetallic parts, and fits and assembles machined parts into complete units, applying knowledge of machine shop theory and procedures, shop mathematics, machinability of materials, and layout techniques, operating conventional, special-purpose, and numerical control (NC) machines and machining centers Has developed skills through formal training or considerable work experience.&nbsp;Works within established procedures with a moderate degree of supervision.&nbsp;Has developed skills to perform day-to-day activities.&nbsp;Understands how the assigned duties relate to others in the team and has a basic understanding of how the team integrates with others.&nbsp;Has no supervisory responsibilities.&nbsp;Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.&nbsp;Impacts the quality of own work and its contribution to the team.&nbsp;Uses communication skills to exchange information.&nbsp;Typically has a high school diploma or equivalent.&nbsp;Typically requires 2 to 4 years of relevant experience.</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for an <strong>Instrument Advisor</strong> to join its Iraq business unit focusing on delivering and driving national technician coaching, mentoring, assessment &amp; development in instrumentation and control.&nbsp;<br> This is a full-time onsite position in Basra, Iraq.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<p><h4>Electrical technician</h4> <p>Responsible for study, design, specification and services related to electrical and electronic systems including power generation, transmission and distribution, power systems performance and control, cabling and wiring, lighting, motor control centers, communications systems, cathodic protection, grounding lightning protection, heat tracing, etc.</p> <p>Under direct supervision, evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adaptations and modifications. With additional experience within one functional area, assists in the design of larger and more complex assignments which involve conventional types of plans, investigations and surveys with relatively few complex features for which there are precedents.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in engineering and minimum of 2 years related experience, with typical experience ranging from 3-7 years.</p> <p>Assignments are generally well defined with clearly specified objectives. Assignments usually include one or more of the following:</p> <ul> <li>Design and development</li> <li>Testing of materials</li> <li>Preparation or checking of design calculations and specifications</li> <li>Studies</li> <li>Research investigations</li> <li>Report preparation</li> <li>Other activities of limited scope</li> </ul> <p>Certification as an engineer-in-training is preferred.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Electrical Technician<br><br><p>Responsible for study, design, specification and services related to electrical and electronic systems including power generation, transmission and distribution, power systems performance and control, cabling and wiring, lighting, motor control centers, communications systems, cathodic protection, grounding lightning protection, heat tracing etc. Under direct supervision, evaluates, selects, and applies standard engineering techniques, procedures, and criteria, using judgment in making minor adaptations and modifications. With additional experience within one functional area, assists in the design of larger and more complex assignments which involve conventional types of plans, investigations and surveys with relatively few complex features for which there are precedents. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and minimum of 2 years related experience, with typical experience ranging from 3-7 years. Assignments are generally well defined with clearly specified objectives. Assignments usually include one or more of the following: design and development, testing of materials, preparation or checking of design calculations and specifications, studies, research investigations, report preparation, and other activities of limited scope. Certification as an Engineer-In-Training is preferred.</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Technician (Electrical) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>electrical pre-commissioning, testing, inspection, rectification, and documentation</strong> under approved procedures and Engineer supervision. Ensure electrical systems supporting instrumentation and ICSS are safely tested and ready for energization and handover.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform assigned <strong>electrical pre-commissioning and commissioning tests</strong> under Engineer supervision.</li><li>Conduct <strong>continuity, insulation resistance (IR), earth/grounding, polarity, and functional tests</strong>.</li><li>Inspect and verify <strong>cables, terminations, glands, panels, connections, and labeling</strong>.</li><li>Perform checks on <strong>UPS, battery systems, control power supplies, and distribution panels</strong>.</li><li>Support testing of electrical power supplies serving <strong>Instrumentation, ICSS, DCS, SIS, PLC, and F&amp;G systems</strong>.</li><li>Identify and rectify approved <strong>electrical defects and punch-list items</strong>.</li><li>Support <strong>LOTO, isolation, de-energization, energization, and safe reinstatement</strong> activities.</li><li>Maintain <strong>test equipment, meters, tools, cables, and commissioning consumables</strong>.</li><li>Complete <strong>test sheets, checklists, punch records, inspection records, and commissioning documentation</strong>.</li><li>Report failed tests, defects, abnormal conditions, and unresolved issues to the <strong>Commissioning Engineer</strong>.</li><li>Coordinate with <strong>Electrical, Instrumentation, ICSS, Operations, Construction, HSE, and vendors</strong>.</li><li>Comply with <strong>PTW, LOTO, electrical safety, HSE, quality, and Company requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Technician (Instrument) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be Responsible for <strong>instrument pre-commissioning, commissioning, calibration, loop checking, functional testing, and punch-list rectification</strong> in accordance with approved procedures. Ensure accurate test results, proper defect reporting, and safe system readiness for handover.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform <strong>instrument pre-commissioning and commissioning</strong> activities in accordance with approved procedures.</li><li>Conduct <strong>calibration, continuity checks, loop checks, and signal verification</strong>.</li><li>Configure and test <strong>field instruments, smart devices, and instrument interfaces</strong>.</li><li>Perform <strong>functional, Cause &amp; Effect, alarm, interlock, and shutdown tests</strong> under Engineer supervision.</li><li>Verify instrument signals and functionality through <strong>DCS, SIS/ESD, F&amp;G, PLC, and ICSS interfaces</strong>.</li><li>Identify, troubleshoot, and rectify <strong>commissioning defects and punch-list items</strong>.</li><li>Support <strong>energization, isolation, reinstatement, startup, and controlled return to service</strong>.</li><li>Maintain and verify <strong>test equipment, calibration standards, tools, and commissioning consumables</strong>.</li><li>Complete <strong>test sheets, calibration records, checklists, punch lists, and commissioning documentation</strong>.</li><li>Report abnormal conditions, failed tests, defects, and unresolved issues to the <strong>Commissioning Engineer</strong>.</li><li>Coordinate with <strong>Operations, Instrumentation, ICSS, Electrical, Mechanical, Construction, HSE, and vendors</strong>.</li><li>Comply with <strong>PTW, LOTO, HSE, process safety, quality, and commissioning requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Tank Calibration Technician</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for performing and supporting <strong>tank gauging, calibration, measurement verification, and documentation</strong> activities in accordance with approved procedures and reference standards. Ensures accurate, traceable measurements and safe execution of calibration work in tank areas.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform or assist with <strong>tank gauging and calibration/verification</strong> activities using approved procedures.</li><li>Inspect and verify <strong>tank level, gauging, measurement, and associated instrumentation</strong>.</li><li>Use approved <strong>reference standards, calibration equipment, and measurement tools</strong>.</li><li>Perform required <strong>measurements, calculations, comparisons, and verification</strong> of tank readings.</li><li>Ensure calibration equipment and reference standards have valid <strong>calibration status and traceability</strong>.</li><li>Record <strong>as-found/as-left readings, measurements, calculations, deviations, and calibration results</strong>.</li><li>Identify and report <strong>measurement errors, abnormal readings, instrument defects, and discrepancies</strong>.</li><li>Support troubleshooting, adjustment, replacement, and verification of <strong>tank gauging instruments</strong>.</li><li>Maintain accurate <strong>calibration certificates, test sheets, inspection records, and CMMS documentation</strong>.</li><li>Coordinate with <strong>Instrumentation, Operations, Maintenance, QA/QC, ICSS, and approved calibration/service providers</strong>.</li><li>Maintain calibration equipment, tools, standards, and work areas in <strong>safe and serviceable condition</strong>.</li><li>Follow <strong>tank-entry restrictions, gas testing, PTW, LOTO, hazardous-area, HSE, and process safety requirements</strong>.</li><li>Ensure all measurements and records remain <strong>complete, accurate, traceable, and auditable</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>HVAC Technician</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for the <strong>maintenance, troubleshooting, inspection, and repair of HVAC and package cooling systems</strong> supporting analyzers, control rooms, ICSS, electrical/instrument rooms, and other critical facilities. Ensures reliable environmental conditions and safe operation of HVAC equipment.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform <strong>preventive and corrective maintenance</strong> on HVAC units, package cooling systems, split/ducted systems, and associated equipment.</li><li>Inspect and maintain <strong>compressors, condensers, evaporators, fans, filters, coils, belts, dampers, drains, and refrigerant circuits</strong>.</li><li>Monitor and record <strong>temperature, humidity, pressure, refrigerant condition, and operating parameters</strong>.</li><li>Troubleshoot and repair <strong>HVAC mechanical, electrical, control, and instrumentation faults</strong>.</li><li>Maintain environmental conditions for <strong>analyzer shelters, control rooms, ICSS rooms, equipment rooms, and other critical areas</strong>.</li><li>Check and maintain <strong>thermostats, sensors, controllers, contactors, relays, motors, and control panels</strong>.</li><li>Perform <strong>filter cleaning/replacement, coil cleaning, refrigerant checks, leak detection, and system servicing</strong>.</li><li>Support <strong>refrigerant recovery, charging, and handling</strong> in accordance with approved procedures and safety requirements.</li><li>Identify abnormal conditions, recurring failures, and equipment deterioration; perform <strong>basic troubleshooting and root-cause assessment</strong> and escalate major defects.</li><li>Verify HVAC performance after maintenance and ensure <strong>environmental conditions are restored before return to service</strong>.</li><li>Maintain accurate <strong>maintenance records, operating logs, checklists, work orders, and CMMS documentation</strong>.</li><li>Coordinate with <strong>Instrumentation, Electrical, ICSS, Analyzer, Operations, and Maintenance teams</strong> for equipment interfaces and shutdown activities.</li><li>Maintain HVAC tools, test equipment, spare parts, and consumables in <strong>safe and serviceable condition</strong>.</li><li>Follow <strong>PTW, LOTO, refrigerant safety, electrical safety, HSE, and procedures</strong>.</li></ul> </div>

<p> Provide network maintenance services<strong>.</strong> </p> <p> Carry out maintenance (Replace Antenna, RRU, Jumper, Optical, SFP).</p> <p> Carry out preventive &amp; corrective maintenance (Visit BSC, Node, site to clear fans and cables systemize)</p> <p> Health check &amp; Clear Alarms (critical, Major, Minor).</p> <p> Make site acceptance tests to be done before going on-air.</p> <p> Install/dismantle the HW of MW &amp; RAN network component including sub-racks, antennas, radios &amp; all related cables not limited to IF, RF &amp; wave guide cables.</p> <p> Install, test &amp; Maintain twisted pair cable, Fiber optic, coax data &amp; lan cabling systems using the related test.</p> <p> Support network design activities in the filed such as line of Sight LOS, alignment, Rack/Subrack Expansion, Tower space, equipment inventories &amp; generating a professional reporting for the survey result.</p> <p> Perform troubleshooting to network failures &amp; identify bottlenecks to ensure long term efficiency of network.</p> <p> Perform emergency &amp; routine field servicing of the transportation network including MW, Fiber Optic &amp; Datacom devices &amp; RAN cabinet.</p> <p> Assist &amp; coordinate with related department technician to joint deployment, troubleshooting, and repair of network E2E segments.</p> <p> Create &amp; implement daily work schedule &amp; performs other related jobs duties as assigned.</p> <p> Carry out materials inventory maintenance support including stock counts, logistics support from WH/office to sites &amp; sites to WH/office. Materials include equipment, accessories, consumables &amp; tools.</p> <p> Secondary or High school.</p> <p> 2 years work experience.</p> <p> </p> <p> <strong>Behavioral Competencies:</strong> </p> <p> <br> </p> <p> Delivering Results &amp; Fostering Ownership.</p> <p> Building Customer Value<strong>. </strong> </p> <p> <br> </p> <p> <strong>Technical Competencies:</strong> </p> <p> <br> </p> <p> Access Network Operations.</p> <p> Problem Solving.</p> <p> Service Operations Center (SOC).</p> <p> Technical Writing and Reporting.</p> <p> Troubleshooting &amp; Technical Problem Solving.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Position: Senior Workover Engineer<br> Location:, Basra, Iraq<br> Rotation: 28/28<br> Duration: 12 months renewable<br>We are seeking an experienced Senior Workover Engineer with strong completion fluids and frac &amp; stim experience to join our Workover Engineering team, one of the world's largest producing onshore oil fields and the cornerstone of Iraq's oil production. Located in southern Iraq near Basra, is a mature, large-scale asset with thousands of producing and injection wells, requiring continuous workover, stimulation, and production enhancement activities to sustain and maximize field performance.<br>The Senior Workover Engineer is a senior technical position responsible for providing engineering leadership and subject matter expertise in completion and workover fluids, stimulation, hydraulic fracturing, acidizing, cementing, and production enhancement operations.<br>The successful candidate will work closely with subsurface, workover rig operations, procurement, HSE, and service company personnel to develop and execute technically sound, safe, and cost-effective solutions that maximize well performance, improve reservoir productivity, and maintain long-term well integrity. The role also serves as the technical focal point for these disciplines within the Workover organization, supporting technology implementation, contractor management, engineering assurance, incident investigations, and the development of junior Iraqi engineering staff.<br><strong>Key Responsibilities</strong><br><ul><li>Provide technical leadership and engineering support for workover and completion operations.</li><li>Design and optimize completion and workover fluid systems, including brines, filtration, fluid-loss control, displacement programs, and wellbore cleanup solutions.</li><li>Lead the development of acid stimulation programs for sandstone and carbonate reservoirs.</li><li>Lead the design and execution of hydraulic fracturing and acid fracturing treatments.</li><li>Provide technical oversight of remedial cementing operations, including squeeze cementing, water shut-off treatments, tie-back liner cementing, cement plugs, and zonal isolation projects.</li><li>Review and approve Workover engineering programs, risk assessments, and Management of Change (MOC) documentation.</li><li>Prepare technical specifications, scopes of work, and tender packages for stimulation, fluid, and cementing services.</li><li>Conduct technical evaluations of service providers and support contract award recommendations.</li><li>Evaluate new technologies and work with service companies to identify opportunities for operational improvement and production enhancement.</li><li>Investigate operational incidents and service quality issues, perform root cause analyses, and develop lessons learned.</li><li>Develop engineering standards, procedures, and best practices within the discipline.</li><li>Mentor and train junior Iraqi engineers and provide technical guidance across the organization.</li></ul><strong>Qualifications</strong><br><ul><li>Bachelor's Degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline.</li><li>Minimum 15 years of relevant oil and gas industry experience.</li><li>Demonstrated experience in:<ul><li>Brownfield rig workover operations</li><li>Completion and workover fluids</li><li>Brine systems, filtration, and fluid-loss control</li><li>Sandstone and carbonate acid stimulation</li><li>Hydraulic fracturing and acid fracturing</li><li>Completion with artificial lift systems, preferably ESPs</li><li>Remedial cementing and well integrity solutions</li><li>Technical contract preparation and bid evaluation</li></ul></li><li>Strong understanding of well performance, production enhancement, and completion practices.</li><li>Experience working with multidisciplinary teams in large onshore oilfield developments.</li><li>Excellent technical, communication, problem-solving, and stakeholder management skills.</li></ul><strong>What We Offer</strong><br><ul><li>Opportunity to work on one of the world's largest producing oil fields.</li><li>Challenging and technically diverse engineering responsibilities.</li><li>Exposure to advanced stimulation, completion, and well integrity technologies.</li><li>Collaborative work environment with multidisciplinary teams and leading service providers.</li><li>Structured rotational schedule (28/28) with accommodation, travel and logistics support provided while on assignment.</li><li>International health insurance coverage</li></ul><strong>Role Purpose</strong><br>The Senior Workover Engineer is the focal point for completion fluids, stimulation, hydraulic fracturing, and cementing engineering activities, ensuring safe, technically robust, and cost-effective execution of operations while supporting asset production, well integrity, and long-term field development objectives.<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The Mechanical Technician is responsible for maintaining, troubleshooting, repairing, and servicing mechanical equipment, machinery, and production systems within the farm. The position ensures that all machinery operates safely, efficiently, and reliably while minimizing equipment downtime and supporting continuous production.</p><p>Key Responsibilities</p><ul><li>Perform preventive and corrective maintenance on factory machinery and mechanical equipment.</li><li>Inspect machines regularly to identify mechanical problems, wear, leaks, or potential failures.</li><li>Diagnose mechanical faults and determine the appropriate repair or replacement requirements.</li><li>Repair, dismantle, assemble, and replace mechanical components such as bearings, belts, chains, gears, shafts, pumps, valves, and couplings.</li><li>Carry out routine lubrication, alignment, adjustment, and calibration of mechanical equipment.</li><li>Respond promptly to machinery breakdowns and production maintenance requests.</li><li>Assist in the installation, commissioning, and relocation of machinery and production equipment.</li><li>Conduct routine inspections and maintenance according to established schedules.</li><li>Read and interpret mechanical drawings, equipment manuals, technical specifications, and maintenance instructions.</li><li>Use hand tools, power tools, measuring instruments, and workshop equipment safely and effectively.</li><li>Work closely with production operators to identify equipment issues and minimize production interruptions.</li><li>Maintain accurate records of maintenance activities, repairs, spare parts, and equipment failures.</li><li>Identify recurring mechanical problems and recommend improvements to increase equipment reliability.</li><li>Ensure that all maintenance work is performed in accordance with factory safety procedures and applicable standards.</li><li>Maintain a clean, organized, and safe maintenance workshop and work area.</li><li>Assist with maintaining adequate stocks of mechanical spare parts and maintenance materials.</li><li>Follow lockout/tagout and other applicable safety procedures before working on machinery.</li><li>Support the Maintenance Supervisor and Engineering team with maintenance projects and equipment improvements.</li><li>Perform other duties related to mechanical maintenance as assigned by management.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>Company Description<br><br><p><strong>Why work for Accor?</strong></p><br><p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.</p><br><p><br>By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit&nbsp;&nbsp;https://careers.accor.com/</p><br><p>Do what you love, care for the world, dare to challenge the status quo!&nbsp;<strong>#BELIMITLESS</strong></p><br><br>Job Description<br><br><p>The HVAC Technician is responsible for installing, maintaining, troubleshooting, and repairing heating, ventilation, and air conditioning systems to ensure optimal performance, safety, and comfort. The role requires technical expertise, preventive maintenance skills, and compliance with safety and operational standards.</p><br><p><strong>Key Responsibilities</strong></p><br><ul><li><p>Install, inspect, maintain, and repair HVAC systems including chillers, AHUs, FCUs, split units, and VRF systems</p><br></li><li><p>Perform routine preventive maintenance as per schedule</p><br></li><li><p>Diagnose mechanical and electrical faults and carry out effective repairs</p><br></li><li><p>Monitor system performance and ensure energy efficiency</p><br></li><li><p>Maintain temperature, humidity, and air quality standards</p><br></li><li><p>Respond promptly to breakdowns and emergency maintenance calls</p><br></li><li><p>Replace defective components such as compressors, motors, thermostats, and valves</p><br></li><li><p>Read and interpret technical drawings, wiring diagrams, and manuals</p><br></li><li><p>Maintain accurate maintenance records and service reports</p><br></li><li><p>Ensure compliance with safety regulations and company SOPs</p><br></li><li><p>Coordinate with other engineering team members and contractors when required</p><br></li></ul><br>Qualifications<br><br><ul><li><p>Strong knowledge of HVAC systems and components</p><br></li><li><p>Electrical and mechanical troubleshooting skills</p><br></li><li><p>Refrigeration systems knowledge (compressors, refrigerants, controls)</p><br></li><li><p>Preventive maintenance and fault diagnosis</p><br></li><li><p>Ability to use testing and diagnostic tools</p><br></li><li><p>Understanding of HVAC controls and automation systems</p><br></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Position: Electrical &amp; Instrumentation Technician - VFD Systems</strong><br> Location:&nbsp;Kirkuk, Iraq<br> Employment Type:&nbsp;1 years Contract role<br> Rotation- 6 week on /3 Week off<br> <br> <strong>Job Purpose</strong><br> Responsible for installation, maintenance, operation, troubleshooting, and repair of electrical, instrumentation, control systems, and VFD used in jet pump surface operations.<br> <br> <strong>Key Responsibilities</strong><ul><li>Install and maintain VFD-driven pumping systems.</li><li>Troubleshoot electrical and instrumentation faults.</li><li>Configure and commission VFDs and PLC-based control systems.</li><li>Perform calibration of pressure, flow, temperature, and level instruments.</li><li>Conduct preventive maintenance and inspection of electrical equipment.</li><li>Read and interpret electrical schematics and loop diagrams.</li><li>Diagnose communication issues between field instruments and control systems.</li><li>Support operational startups and equipment commissioning.</li></ul><strong>Required Qualifications</strong><ul><li>Diploma in Electrical, Electronics, or Instrumentation Engineering.</li><li>Minimum 3-5 years of oilfield experience.</li><li>Strong knowledge of:<ul><li>VFD programming and troubleshooting</li><li>MCC panels and switchgear</li><li>PLC systems</li><li>Instrument calibration</li><li>Electrical maintenance and fault finding</li><li>Control systems</li></ul></li><li>Experience with high-pressure pumping operations is preferred.</li></ul><strong>Preferred Skills</strong><ul><li>ABB, Siemens, Schneider, or Allen-Bradley VFD experience.</li><li>PLC troubleshooting experience.</li></ul>Hazardous area electrical certification is an advantage<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The HVAC Technician is responsible for installing, maintaining, troubleshooting, and repairing heating, ventilation, and air conditioning systems to ensure optimal performance, safety, and comfort. The role requires technical expertise, preventive maintenance skills, and compliance with safety and operational standards.</p> <p> <strong>Key Responsibilities</strong> </p> <ul> <li> <p>Install, inspect, maintain, and repair HVAC systems including chillers, AHUs, FCUs, split units, and VRF systems</p> </li> <li> <p>Perform routine preventive maintenance as per schedule</p> </li> <li> <p>Diagnose mechanical and electrical faults and carry out effective repairs</p> </li> <li> <p>Monitor system performance and ensure energy efficiency</p> </li> <li> <p>Maintain temperature, humidity, and air quality standards</p> </li> <li> <p>Respond promptly to breakdowns and emergency maintenance calls</p> </li> <li> <p>Replace defective components such as compressors, motors, thermostats, and valves</p> </li> <li> <p>Read and interpret technical drawings, wiring diagrams, and manuals</p> </li> <li> <p>Maintain accurate maintenance records and service reports</p> </li> <li> <p>Ensure compliance with safety regulations and company SOPs</p> </li> <li> <p>Coordinate with other engineering team members and contractors when required</p></li></ul><p><strong>Why work for Accor?</strong></p><p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor s limitless possibilities.</p><p><br> By joining Accor, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality. Discover the life that awaits you at Accor, visit https://careers.accor.com/</p><p>Do what you love, care for the world, dare to challenge the status quo! <strong>#BELIMITLESSQualifications </strong></p> <ul> <li> <p>Strong knowledge of HVAC systems and components</p> </li> <li> <p>Electrical and mechanical troubleshooting skills</p> </li> <li> <p>Refrigeration systems knowledge (compressors, refrigerants, controls)</p> </li> <li> <p>Preventive maintenance and fault diagnosis</p> </li> <li> <p>Ability to use testing and diagnostic tools</p> </li> <li> <p>Understanding of HVAC controls and automation systems</p></li></ul><p><strong>Desired Candidate Profile</strong></p>Qualifications <div> <ul> <li> <p>Strong knowledge of HVAC systems and components</p> </li> <li> <p>Electrical and mechanical troubleshooting skills</p> </li> <li> <p>Refrigeration systems knowledge (compressors, refrigerants, controls)</p> </li> <li> <p>Preventive maintenance and fault diagnosis</p> </li> <li> <p>Ability to use testing and diagnostic tools</p> </li> <li> <p>Understanding of HVAC controls and automation systems</p></li></ul></div>

<p><h4>Responsibilities</h4> <p>The Air Crew Life Support Technician performs inspections, maintenance, and troubleshooting tasks on T-6A aircraft.</p> <ul> <li>Perform launch, recovery, scheduled, and unscheduled inspections and maintenance.</li> <li>Perform preflight, through-flight, and BPO inspections; ground handling; minor maintenance; and servicing.</li> <li>Perform routine troubleshooting, installation, repair, and maintenance of aircraft electromechanical systems and components at the organizational level of maintenance.</li> <li>Service aircraft and perform end-of-runway, post-flight, preflight, through-flight, and phase inspections.</li> <li>Troubleshoot and maintain aircraft structures, systems, components, and related equipment. Remove and install aircraft components.</li> <li>Perform scheduled and unscheduled maintenance and inspections on company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals, and procedures.</li> <li>Service, operate, and maintain ground support equipment. Clean aircraft interiors and exteriors and work areas.</li> <li>Complete all maintenance documentation accurately.</li> <li>Perform other position-related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required</h4> <ul> <li>At least four years of directly related heavy aircraft maintenance experience is highly desired. Experience must include following applicable aircraft servicing procedures, maintenance manuals, and parts catalogs.</li> <li>Experience with OBOGS systems and T-6 life support is required.</li> <li>Read, interpret, and use manufacturer and aircraft maintenance manuals, service bulletins, blueprints, wiring and schematic diagrams, data tables, and other specifications to determine the feasibility and method of repairing or replacing malfunctioning or damaged components.</li> <li>Inspect, repair, and operate ground support and auxiliary equipment.</li> <li>Possess a current state-issued driver’s license.</li> <li>Be able to obtain and maintain a U.S. passport for facility credentials and authorization. U.S. citizenship is required for facility credentials and authorization at this work site.</li> </ul> <h4>Work environment, physical demands, and mental demands</h4> <ul> <li>Carry and lift up to 50 pounds overhead.</li> <li>Walk, climb, stand, stoop, stretch, and squat to move equipment, board and deboard aircraft, perform maintenance using ladders, and work atop and below aircraft.</li> <li>Work at high altitudes when performing flight attendant duties.</li> <li>Work primarily outdoors in a high-noise environment.</li> <li>Perform maintenance in low-light areas and operate support equipment after daylight hours. Work occasionally in inclement weather.</li> </ul></p><p></p>