Metal Engineer Jobs

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Build and install iron or steel girders, columns, and other construction materials to form buildings, bridges, and other structures. Cut, position, and bolt down steel bars to reinforce concrete. Repair older infrastructure. Make, weld, and cut structural metal in fabricating shops. Erect steel frames. Direct operation of cranes to move structural steel, reinforcing bars, and other materials onto and around the construction site. Connect steel columns, beams, and girders. Drill holes into steel for bolts. Number steel according to assembly instructions. Unload and stack steel. Attach cables to steel and then to the crane. Hoist steel into place in the framework. Position steel with connecting bars and spud wrenches. Work with driftpins to align the holes in the steel with the framework holes. Use plumb bobs, levels, and laser equipment to check alignment. Bolt or weld piece into place. Set reinforcing bars into forms to hold concrete. Fasten bars together with wire. Place spacers under rebar to lift bars off deck. Cut bars with metal shears and torches. Reinforce concrete with welded wire fabric. Substitute cables for rebar. Tighten cables with jacking equipment. Install stairs, handrails, or curtain walls. Make sure all pieces are fitted properly and complete repairs as necessary. The workers should be experienced and comfortable working at heights too.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have experience in large construction projects like ( large buildings, stadiums, bridges, refineries, fuel farms and offshore oil rigs). The candidates should have long experience in Gulf in Mega steel structural projects.</p><p></p></section>

<ul><li><strong>Job Title:</strong> Mechanical Engineer</li><li><strong>Location:</strong> Iraq</li><li><strong>Company:</strong> Iraqi National Food Industries Group</li><li>Job Summary</li><li>We are seeking a qualified Mechanical Engineer to join our team. The successful candidate will be responsible for the operation, maintenance, troubleshooting, and continuous improvement of production machinery and equipment within our manufacturing facilities.</li></ul><p>&nbsp;</p>

<p><h4>Instrument & Controls Lead Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>We are looking for an Instrument & Controls (I&C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument & Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&C Engineers as direct reports.</p> <h4>Responsibilities</h4> <ul> <li>Production delivery, optimisation & excellent performance</li> <li>Responsible for day-to-day optimization of I&C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow installed production capacity.</li> <li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed, and managed via operational risk assessment processes.</li> <li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li> <li>Prioritize I&C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li> <li>Actively lead continuous improvement projects involving instrumentation, automation, and control systems; promote continuous improvement philosophy and engage site teams to drive improvement initiatives.</li> </ul> <h4>Qualifications</h4> <ul> <li>Above 10 years experience in oil and gas industry, preferably with international oil companies (direct or contract).</li> <li>Technical degree in engineering or relevant engineering subject.</li> <li>Experience in previous asset engineering or operations engineering role.</li> <li>Practical exposure to production facilities.</li> <li>Excellent communication, interpersonal, and coaching skills.</li> <li>Strong bias for being proactive and getting results.</li> <li>Excellent IT skills – Office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li> <li>Skilled in behaviour change management.</li> <li>Not essential but preferable: professional (chartered) engineer.</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred Qualifications</h4> <ul> <li>Certified professional engineer.</li> </ul> <p><strong>Belong. Connect. Grow. with KBR!</strong></p></p><p></p>

<p>We are recruiting for a Welding Engineer with the following details : Location : Basrah, IRAQ Duration : 12 months, renewable Work Scheme : Rotational, 4 weeks ON and 4 weeks OFF Job Overview / Summary Ensure that all welding activities related to pipelines, flowlines, piping, and structures are performed in compliance with Project Specifications, approved procedures, applicable codes.</p><p><strong>Desired Candidate Profile</strong></p><p>Experience Requirements</p><ul><li><p><strong>Total Experience Required:</strong> 20 years in Oil and Gas projects</p></li><li><p><strong>Relevant Experience Required:</strong> 10 years in a similar position</p></li><li><p><strong>Industry-Specific Experience:</strong> Oil and Gas projects</p></li></ul><br><p>Qualifications</p><ul><li><p><strong>Minimum Qualification Required:</strong> International Welding Engineer (IWE / IIW) or Engineering degree in a relevant discipline</p></li><li><p><strong>Language Proficiency:</strong> Fluency in English (speaking and writing); Arabic would be a plus</p></li></ul>

<p><h4>Lead process engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Production delivery, optimisation & excellent performance</h4> <ul> <li>Responsible for the day-to-day plant optimisation.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.</li> <li>Responsible for ensuring robust plant monitoring routines are completed with all deviations acted on and ensuring system is fit for purpose.</li> <li>Support investigations (e.g. 5 Whys) for all process safety incidents, production losses and product quality issues over defined limits.</li> <li>Drive clear prioritisation of vulnerabilities so action is focused in the right areas.</li> <li>Actively lead and ensure participation in continuous improvement projects on your sites and promote the benefit of the CI philosophy to engage the site teams in this process.</li> </ul> <h4>Experience, qualifications & key skills</h4> <ul> <li>Above 10 years experience in O&G industry (preferable with IOC’s direct or contract)</li> <li>Technical degree in chemical engineering or allied engineering subject.</li> <li>Previous experience in asset engineering / operations engineering role</li> <li>Practical / operational exposure to production facilities</li> <li>Excellent communication, interpersonal and coaching skills</li> <li>Strong bias for being proactive and getting results</li> <li>Excellent IT skills – office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results</li> <li>Skilled in behaviour change management</li> </ul> <p><strong>Not essential but preferable:</strong></p> <ul> <li>Professional (Chartered) engineer / TA2-3 qualified</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred qualifications:</h4> <p>Certified professional engineer</p> <p>Belong. Connect. Grow. with KBR!</p></p><p></p>

<p><h4>Job description</h4> <p><strong>Division:</strong> CSSP (Ratawi Hub – Iraq)<br> <strong>Direction:</strong> PCM</p> <h4>Situation in organization</h4> <p>The Reporting Engineer position is within the Project Control Organization of the project reporting to the Planning & Reporting Manager.</p> <h4>Job dimensions</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data to support decision-making and ensure transparency across all phases of the CSSP project. The role contributes to the timely and accurate delivery of internal and external reports, dashboards, and KPIs, including HSE and risk-related metrics.</p> <p>In addition, the Reporting Engineer is responsible for supporting project digitalization and information management initiatives, ensuring the effective governance, quality, accessibility, and integration of project information across all participating organizations. The position oversees the Information Management Assistant function and promotes the efficient use of digital collaboration platforms, reporting systems, document management tools, and data-sharing solutions to enhance project execution and stakeholder alignment.</p> <p>The role acts as a focal point between Project Controls, Engineering, Construction, HSE, Contractors, and Company stakeholders to ensure consistency, traceability, and reliability of project data and information throughout the project lifecycle.</p> <p>Iraq Common Seawater Supply Project (CSSP) intends to provide treated seawater to the oil fields in southern Iraq (for injection). CSSP is composed of water pipelines which are part of Basra Oil Company (BOC) scope of work, and the Water Infrastructure Project (WIP), previously named STF (Seawater Treatment Facilities). The WIP will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr.</p> <p>The major components of the WIP include seawater intake and outfall structures, material offloading facility, seawater clarification, filtration and deoxygenating processes, shipping pumps, a fuel gas pipeline, power generation, utilities and non-process.</p> <p>The budget of the WIP is circa $3 billion.</p> <p>The Reporting Engineer is expected to commence duties in the 3rd quarter of 2026 and will be based in Basra.</p> <h4>Activities</h4> <p><strong>1- Reporting & Analysis</strong><br> <li>Collect and validate progress data from various project disciplines (engineering, procurement, construction, HSE, etc.).</li> <li>Prepare and update weekly/monthly progress reports, dashboards, and executive summaries.</li> <li>Track and report key performance indicators (KPIs), including physical progress, productivity, and forecasted completion dates.</li> <li>Support the Planning & Reporting Manager in preparing presentations for internal and external stakeholders.</li> <li>Ensure consistency and traceability of reporting documentation across all project phases.</li></p> <p><strong>2- HSE & Risk Reporting</strong><br> <li>Monitor and report HSE performance indicators (e.g., LTIs, TRIR, safety observations) in coordination with HSE teams.</li> <li>Maintain and update HSE dashboards and integrate safety metrics into overall project reporting.</li> <li>Assist in compiling and presenting periodic risk assessments and mitigation tracking.</li></p> <p><strong>3- Systems & Tools</strong><br> <li>Use reporting tools such as Power BI, Excel, Word, PowerPoint, and project control systems to generate visualizations and reports.</li> <li>Ensure data integrity and alignment between planning, cost control, and reporting systems.</li></p> <p><strong>4- Documentation & Compliance</strong><br> <li>Ensure compliance with TotalEnergies, BOC, and project standards for reporting procedures.</li> <li>Support audits, reviews, and project evaluations by providing accurate and timely reporting documentation.</li> <li>Coordinate with internal departments (Planning, Cost Control, Contracts, HSE) to ensure reporting accuracy.</li></p> <p><strong>5- Information Management & Digitalization</strong><br> <li>Lead project information management and digitalization activities.</li> <li>Supervise the Information Management Assistant and oversee project information, data, and records management.</li> <li>Ensure information quality, consistency, accessibility, and traceability across all project stakeholders.</li> <li>Coordinate information exchange between Company and Contractors.</li> <li>Support and optimize digital tools and platforms, including SharePoint, Power BI, and document management systems.</li> <li>Develop and maintain project data repositories, dashboards, and reporting systems.</li></p> <h4>Context and environment</h4> <p>TotalEnergies is acting as contractor to BOC. After the completion of the project, the facilities will be handed over to BOC for operation.</p> <h4>Accountabilities</h4> <p>The Reporting Engineer is responsible for collecting, analyzing, and presenting project performance data while ensuring effective information management and digital collaboration across the CSSP project. The role drives reporting excellence, supports project digitalization initiatives, supervises the Information Management Assistant, and ensures that project information is accurate, accessible, integrated, and available to support timely decision-making across all stakeholders.</p> <h4>Qualifications / Experience required</h4> <li>Degree in engineering, data analytics, or related field.</li> <li>Minimum 5 years of experience in project reporting within large-scale industrial or oil & gas projects.</li> <li>Strong analytical and data visualization skills.</li> <li>Proficiency in reporting tools (Power BI, Excel, Word, PowerPoint, etc.).</li> <li>Experience in information management or project data management.</li> <li>Understanding of data governance and information quality principles.</li> <li>Good communication and organizational skills.</li> <li>Ability to work in a multicultural and high-pressure environment.</li> <li>Experience in engineering/construction commercial or contracts administration role.</li> <li>Ability to listen to and understand the signals and queries from various interlocutors.</li> <li>Languages: English is mandatory; knowledge of French and Arabic is a plus.</li></p><p></p>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic guest focused Housekeeping professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Housekeeping Attendant you are responsible for daily assigned duties as instructed by Supervisors while adhering to hotel policies and procedures and your role will include key responsibilities such as:<br><br>• Receive work assignment, keys and supplies from the supervisor and sign the key log book accurately<br>• Clean rooms and bathrooms, performing any combination of the following duties<br>• Keep fire exits and stair ways clear of any obstruction<br>• Check and report any maintenance work required immediately<br>• Pick up any litter from corridors and pathways<br>• Vacuum carpet and upholstered furniture, dust and wipe furniture, empty ashtrays and wastebaskets<br>• Make bed, wash sink, bathtub, toilet, tiles, mirrors and floor and polish brass and metal<br>• Replenish bathroom supplies and room supplies<br>• Tidy and arrange neatly guest toilet articles on vanity top and spot cleans carpet when necessary<br>• Clean and keep the guest corridors, service pantries and service areas neat and tidy at all times<br>• Remove Room Service tray and trolley from guestroom and corridors<br>• Inform valet service to collect guests clothes for laundry, dry cleaning or pressing services</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic guest focused Housekeeping professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Housekeeping Attendant you are responsible for daily assigned duties as instructed by Supervisors while adhering to hotel policies and procedures and your role will include key responsibilities such as:<br><br>• Receive work assignment, keys and supplies from the supervisor and sign the key log book accurately<br>• Clean rooms and bathrooms, performing any combination of the following duties<br>• Keep fire exits and stair ways clear of any obstruction<br>• Check and report any maintenance work required immediately<br>• Pick up any litter from corridors and pathways<br>• Vacuum carpet and upholstered furniture, dust and wipe furniture, empty ashtrays and wastebaskets<br>• Make bed, wash sink, bathtub, toilet, tiles, mirrors and floor and polish brass and metal<br>• Replenish bathroom supplies and room supplies<br>• Tidy and arrange neatly guest toilet articles on vanity top and spot cleans carpet when necessary<br>• Clean and keep the guest corridors, service pantries and service areas neat and tidy at all times<br>• Remove Room Service tray and trolley from guestroom and corridors<br>• Inform valet service to collect guests clothes for laundry, dry cleaning or pressing services</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic guest focused Housekeeping professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Housekeeping Attendant you are responsible for daily assigned duties as instructed by Supervisors while adhering to hotel policies and procedures and your role will include key responsibilities such as:<br><br>• Receive work assignment, keys and supplies from the supervisor and sign the key log book accurately<br>• Clean rooms and bathrooms, performing any combination of the following duties<br>• Keep fire exits and stair ways clear of any obstruction<br>• Check and report any maintenance work required immediately<br>• Pick up any litter from corridors and pathways<br>• Vacuum carpet and upholstered furniture, dust and wipe furniture, empty ashtrays and wastebaskets<br>• Make bed, wash sink, bathtub, toilet, tiles, mirrors and floor and polish brass and metal<br>• Replenish bathroom supplies and room supplies<br>• Tidy and arrange neatly guest toilet articles on vanity top and spot cleans carpet when necessary<br>• Clean and keep the guest corridors, service pantries and service areas neat and tidy at all times<br>• Remove Room Service tray and trolley from guestroom and corridors<br>• Inform valet service to collect guests clothes for laundry, dry cleaning or pressing services</p> </div>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p>Knowledge &amp; Skills Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Amentum is seeking a Crew Chief (Aircraft Mechanic III) to provide aircraft Maintenance Support, Management, and Leadership of a T-6A opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate shall possess versatile skills and abilities to perform a wide range of responsibilities. The selected candidate will exercise sound judgement in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts both short term and long term. This person shall have working experience all aspects of flightline, phase maintenance, and Aircrew Life Support Systems. Knowledge &amp; Skills Experience providing OJT to technicians. Interface with operational customer to develop flying schedules and plan major maintenance events, complete daily and monthly operational reports, documents inventory usage, controls workflow. Work with other A&amp;P Mechanics and technical representatives to trouble shoot, diagnose and solve unusual and complex maintenance problems. Ability to apply logic and good judgment, understand technical order diagrams and procedures, use test equipment for analysis of airframe, engine, flight control, pneudraulic, fuel, electrical/electronic systems, problems. Plan and schedule aircraft utilization and maintenance activity and coordinates performance with operational customers. Assist in maintaining accurate parts inventory. Supervises aircraft jacking, lifting, and towing operations. Supervises aircraft and component inspections. Interprets inspection findings and determines adequacy of corrective actions. Troubleshoot aircraft structures, systems, components, and related equipment. Reviews maintenance forms, aircraft records, automated maintenance data systems, and historical reports to ensure complete documentation. Ability to Inspect and operate powered and nonpowered aerospace ground equipment. Performs Quality Verification Inspections (QVI) as needed Perform other qualified duties as assigned Experience &amp; Education Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P). Minimum of Ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar Fixed-Wing aircraft is required. Must have Aircraft Maintenance and Egress experience. Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications. Demonstrated leadership ability combined with attention to detail. Must have knowledge of the scope and limitation of various categories of maintenance and their application. Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneudraulic; and mechanical principles. Knowledge of sheet metal, properties of materials, fuels, and oils. Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components. Must have a working knowledge of aircraft safety requirements. Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Must have current Federal Aviation Administration (FAA) Airframe and Powerplant License (A&amp;P).</p><p>Minimum of Ten (10) years working knowledge of aircraft maintenance operations on one or more of the T-6 Texan or similar Fixed-Wing aircraft is required.</p><p>Must have Aircraft Maintenance and Egress experience.</p><p>Must have a broad working knowledge of aircraft maintenance, inspection techniques, FAA regulations, and Air Force technical publications.</p><p>Demonstrated leadership ability combined with attention to detail.</p><p>Must have knowledge of the scope and limitation of various categories of maintenance and their application.</p><p>Must know theories and principles of engine operations; accessories and components; theory of flight; rigging of flight controls; electrical and electronic; pneudraulic; and mechanical principles.</p><p>Knowledge of sheet metal, properties of materials, fuels, and oils.</p><p>Ability to read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</p><p>Must have a working knowledge of aircraft safety requirements.</p><p>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;<strong>Launch Your Career as a Field Engineer with Weatherford</strong></p><br> <p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs.&nbsp;</p><br> <p>This is more than just a job — it’s an adventure. You’ll be working in the field, often at remote rig sites, where you’ll gain unmatched experience and responsibility from day one. Whether it’s assembling equipment, analysing data, or solving problems on the fly, you’ll be at the heart of operations that matter.&nbsp;</p><br> <p><strong>Your Development Journey</strong>&nbsp;</p><br> <p>You’ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience:&nbsp;</p><br> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients</li> </ul> <p><strong>Your day-to-day could include:&nbsp;</strong></p><br> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives</li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs</li> <li>Analyse performance data and recommend improvements&nbsp;</li> <li>Manage&nbsp;equipment logistics and ensure seamless setup and operation at the rig site</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently</li> </ul> <p><strong>What We’re Looking For</strong>&nbsp;</p><br> <ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months</li> <li>No more than 1 year of experience</li> <li>English language fluent proficiency (written and spoken)</li> <li>Strong communication and interpersonal skills</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li> <li>A passion for hands-on work and learning in dynamic environments&nbsp;(onshore and offshore)</li> </ul> <p><strong>What to Expect</strong>&nbsp;</p><br> <p>This role is physically and mentally demanding. You’ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you’re up for the challenge, the rewards are big.&nbsp;</p><br> <p>You’ll join one of our specialized product lines, such as:&nbsp;</p><br> <ul> <li>Completions&nbsp;</li> <li>Drilling Services&nbsp;</li> <li>Wireline Services&nbsp;</li> <li>Artificial Lift&nbsp;</li> <li>Well Services&nbsp;</li> <li>Managed Pressure Drilling…and many more&nbsp;</li> </ul> <p>&nbsp;<strong>Why Join Us?</strong>&nbsp;</p><br> <ul> <li>Fast-track your career with structured development and mentorship&nbsp;</li> <li>Work with cutting-edge technology in real-world settings&nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services&nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more&nbsp;</li> </ul> <p>Ready to engineer your future? Apply now and start your journey with Weatherford</p><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;<strong>Launch Your Career as a Field Engineer with Weatherford</strong></p><br> <p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs.&nbsp;</p><br> <p>This is more than just a job — it’s an adventure. You’ll be working in the field, often at remote rig sites, where you’ll gain unmatched experience and responsibility from day one. Whether it’s assembling equipment, analysing data, or solving problems on the fly, you’ll be at the heart of operations that matter.&nbsp;</p><br> <p><strong>Your Development Journey</strong>&nbsp;</p><br> <p>You’ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience:&nbsp;</p><br> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients</li> </ul> <p><strong>Your day-to-day could include:&nbsp;</strong></p><br> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives</li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs</li> <li>Analyse performance data and recommend improvements&nbsp;</li> <li>Manage&nbsp;equipment logistics and ensure seamless setup and operation at the rig site</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently</li> </ul> <p><strong>What We’re Looking For</strong>&nbsp;</p><br> <ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months</li> <li>No more than 1 year of experience</li> <li>English language fluent proficiency (written and spoken)</li> <li>Strong communication and interpersonal skills</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li> <li>A passion for hands-on work and learning in dynamic environments&nbsp;(onshore and offshore)</li> </ul> <p><strong>What to Expect</strong>&nbsp;</p><br> <p>This role is physically and mentally demanding. You’ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you’re up for the challenge, the rewards are big.&nbsp;</p><br> <p>You’ll join one of our specialized product lines, such as:&nbsp;</p><br> <ul> <li>Completions&nbsp;</li> <li>Drilling Services&nbsp;</li> <li>Wireline Services&nbsp;</li> <li>Artificial Lift&nbsp;</li> <li>Well Services&nbsp;</li> <li>Managed Pressure Drilling…and many more&nbsp;</li> </ul> <p>&nbsp;<strong>Why Join Us?</strong>&nbsp;</p><br> <ul> <li>Fast-track your career with structured development and mentorship&nbsp;</li> <li>Work with cutting-edge technology in real-world settings&nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services&nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more&nbsp;</li> </ul> <p>Ready to engineer your future? Apply now and start your journey with Weatherford</p><br> <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Machinist, Maintenance will fabricate parts and components for equipment or items on fabrication work order and to meet specified or original specification requirements in accordance with applicable equipment technical directives referenced in the Technical Library. Principal Accountabilities Interpret written instructions and specifications. Plan and lay out of work to be completed. Use a variety of machinist's hand tools and precision measuring instruments. Set up and operate standard machine tools. Responsible for the shaping of metal parts to close tolerances. Make standard shop computations relating to dimensions of work, tooling, feeds, and speeds of machining. Perform other qualified duties as requested.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent.</li><li>U.S. military technical school or specialized training course is desired, certification of education level.</li><li>Four (4) or more years machinist experience with repair, modification, maintenance and overhaul of equipment related to individual specialty codes within the past six (6) years.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years and 6 blank pages at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq visa.</li></ul><p></p></section>

<p>The Electrical Engineer will be responsible for electrical system design, load calculations, and preparation and review of material submittals in compliance with project specifications and international standards.</p>

<p><h4>Job description</h4> <p><strong>Job title:</strong> Planning Engineer</p> <p><strong>Reports to:</strong> Project Control Manager</p> <p><strong>Skillpool:</strong> Project Services</p> <p><strong>Company:</strong> KBR-Iraq</p> <p><strong>Project:</strong> EPCM</p> <p><strong>Location:</strong> Basra, Iraq</p> <p><strong>Rotation:</strong> 28/28</p> <p><strong>Required:</strong> Local National</p> <h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Roles and responsibilities</h4> <p>The planning engineer will report to the project control manager. Specific responsibilities include:</p> <ul> <li>Developing and maintaining project execution schedules including level 1/2/3 schedules using tools like Primavera P6. Ensure alignment on project assumptions with cost engineering, cost estimation, risk management and project management.</li> <li>Implement schedule requirements of company into the planning and cascade these to the contractors accordingly.</li> <li>Coordinate with engineering, procurement, and construction teams to gather inputs for the master schedule.</li> <li>Monitor progress and update schedules regularly to reflect actual performance.</li> <li>Identifying trends or potential slippages and report on these to the project engineers or the project services lead.</li> <li>Producing regular reports on progress against schedule. Reporting schedule performance index (SPI).</li> <li>Deliver and maintain consistent and realistic plans and control structures for the project. Understand the list of plans required to execute the assigned project sub-elements and their interface to other sub-elements. Develop the activities, durations as per productivity norms, logic, resources and progress for the assigned project sub-elements, leading to the creation of the baseline schedule and its subsequent maintenance.</li> <li>Develop, implement and comply with the planning and progress monitoring procedures.</li> <li>Conduct the schedule monthly progress update, forecast, critical path and trend analyses for assigned elements, including any impact from interface areas. Implement and maintain the status reports. Provide regular and comprehensive schedule status reports to project engineers.</li> <li>Liaise with and challenge project engineering personnel to ensure proper understanding of the key schedule sensitivities and drivers.</li> <li>Develop contract key dates, milestones and project hub plan dates that align with the overall project schedule.</li> <li>Participate in evaluating bid schedules and reviewing and assessing contractor plans to support contract award recommendations.</li> <li>Develop contract sections for planning and progress monitoring and reporting. Review, verify, assess contractors reported progress and ensure that this is reflected in the project schedule.</li> <li>Contribute to the translation of the project’s risk profile into the probabilistic risk model and understand the output, including the key risk drivers for the possible range of schedule completion dates. Track the criticality of the main paths to completion and float consumption.</li> <li>Provide input data for and participate in benchmarking activities.</li> <li>Contribute to close-out data to enable knowledge retention (lessons learned, project data compilation) at completion of work.</li> </ul> <h4>Education, skills & experience</h4> <p><strong>Education</strong></p> <p>Bachelor’s degree or diploma in any discipline</p> <p><strong>Experience and skill set</strong></p> <ul> <li>Minimum 8 years experience in oil and gas industry in planning engineer roles.</li> <li>Minimum 5 years experience in oil and gas related project delivery projects.</li> <li>Ability to work and manage in a multi-cultural environment with good understanding of cost estimation parameters to be considered in Middle East.</li> <li>Skill to actively engage with different project disciplines.</li> <li>Ability to work and manage in a multi-cultural environment.</li> </ul></p><p></p>

<p>Wood is recruiting for a Project Engineer (Local National Arabic Speaker) to join its Iraq business unit focusing on supporting a portfolio of construction based minor EPC and maintenance repair order projects. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement. Reports to: Senior Project Manager Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws. What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges. Expected: Demonstrable experience in the management of multi-disciplined construction focused minor EPC and maintenance repair order projects. Practiced in project control mechanisms and with commercial and technical risk assessments Excellent communications skills. Practitioner in risk management processes. Strong effective delegation skills. Wood is recruiting for a Project Engineer (Local National Arabic Speaker) to join its Iraq business unit focusing on supporting a portfolio of construction based minor EPC and maintenance repair order projects. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement. Reports to: Senior Project Manager #Wood #Iraq #Kirkuk #Project Engineer The role This is an exciting opportunity for an experienced Project Engineer to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region. What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones Job Objectives: The objective of the role is to support a portfolio of construction biased minor EPC and maintenance repair order projects. This includes leading a small group of multi-discipline construction engineers and subcontractors where applicable to complete the full lifecycle of the project following the Project Management Framework. Accountable for: Delivery of a portfolio of minor EPC and maintenance repair order projects Management and coordination of local supply chain partners Project execution and governance compliance Defining project execution strategies Application of project change control practices and procedures Monitoring and control of portfolio performance Maintaining cost awareness by all project personnel throughout all phases of project execution Ownership of project reporting Leadership and management of their project portfolio Identifying and managing critical issues Proactive risk management and reporting Preparation of Early Warning Notices and Compensation Events Responsible for:&nbsp;</p><p><strong>Desired Candidate Profile</strong></p><p>Demonstrable experience in the management of multi-disciplined construction focused minor EPC and maintenance repair order projects. Practiced in project control mechanisms and with commercial and technical risk assessments Excellent communications skills. Practitioner in risk management processes. Strong effective delegation skills.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Job Title: Inventory / SCM Location: Iraq Experience: 3 5 Years Job Summary We are seeking an experienced Inventory / SCM Support Engineer to support warehouse operations, inventory validation, and ERP-based supply chain processes. The ideal candidate should have hands-on experience with Oracle, SAP, or IBM Maximo , along with strong knowledge of warehouse operations, barcode/RFID technologies, and physical inventory verification. Key Responsibilities Perform inventory validation and physical stock verification. Support warehouse mapping and material master data validation. Troubleshoot barcode scanners, RFID devices, and warehouse hardware. Execute inventory transactions and reconciliation in Oracle, SAP, or Maximo. Identify and resolve inventory discrepancies. Support warehouse system testing, implementation, and on-site validation. Coordinate with warehouse, logistics, and IT teams to ensure inventory accuracy.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Bachelor's degree in Supply Chain, Logistics, Engineering, IT, or a related field.</li><li>3 5 years of experience in warehouse operations or SCM systems.</li><li>Hands-on experience with Oracle SCM, SAP MM/WM/EWM, or IBM Maximo .</li><li>Strong knowledge of inventory control, warehouse operations, and material management.</li><li>Experience with barcode/RFID devices and warehouse hardware troubleshooting.</li><li>Strong analytical, communication, and problem-solving skills.</li><li>Preferred Experience in Oil &amp; Gas, Industrial, or Large Enterprise environments.</li><li>Oracle, SAP, Maximo, or Supply Chain certifications are an advantage.</li></ul><p></p></section>