Plumbing Engineer

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>E&amp;I Engineer<br><br>E&amp;I EngineerECSS30 - Sr. Specialist, Commissioning<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Project Engineer ensures that projects are completed in a safely manner and meets the project objectives through planning and scheduling, resource allocation and management, cost control, technical direction, compliance with quality standards and procedures. Assists the Project Manager in overseeing the Operational Management areas: Human Resource Management, Project Planning, Cost Management, Time Management, Quality Management, Contract Administration, Safety Management, Subcontract management, Material Procurement and Management of all Projects System Assembly</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Manage and oversee projects from conception to completion, ensuring adherence to schedules, budgets, and quality standards.</p><br> <p>Coordinate with architects, engineers, contractors, and subcontractors to develop project plans, specifications, and timelines.</p><br> <p>Supervise activities on-site, including scheduling labor, materials, and equipment to ensure efficient project execution.</p><br> <p>Monitor project progress, identifying potential delays, risks, and issues, and implementing corrective actions as necessary.</p><br> <p>Conduct regular inspections and quality control checks to ensure compliance with design specifications and regulatory requirements.</p><br> <p>Prepare and review project documentation, including contracts, change orders, and progress reports, to maintain accurate records.</p><br> <p>Communicate regularly with clients, stakeholders, and project teams to provide updates on project status, milestones, and deliverables.</p><br> <p>Manage project budgets and expenditures, tracking costs and forecasting expenses to ensure financial objectives are met.</p><br> <p>Identify opportunities for process improvements and efficiencies to enhance project delivery and outcomes.</p><br> <p>Ensure compliance with safety regulations and promote a culture of safety awareness among project teams and subcontractors.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>n-depth understanding of construction principles, methods, and materials.</p><br> <p>Proficiency in project management software and tools for scheduling, budgeting, and documentation.</p><br> <p>Strong communication skills to effectively liaise with stakeholders, subcontractors, and project teams.</p><br> <p>Problem-solving abilities to address challenges and obstacles encountered during project execution.</p><br> <p>Leadership skills to effectively manage teams and coordinate construction activities on-site.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Contingency Workforce Management L3<br>Commercial &amp; Residential Construction L3<br>Project Planning L3<br>Construction Budgeting L3<br>Project Management L3<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA)<br>Bachelor's Degree in Civil Engineering or any related field<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops,&nbsp; and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br>Job Description<br><p><strong>Role Summary</strong></p><br><p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p><br><p><strong>What’s On Your Plate?</strong></p><br><p><strong>Expansion &amp; Layout Development:</strong></p><br><ul><li><p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p><br></li><li><p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p><br></li></ul><p><strong>Procurement &amp; Technical Documentation:</strong></p><br><ul><li><p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p><br></li><li><p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p><br></li></ul><p><strong>Facilities Maintenance &amp; Contractor Supervision:</strong></p><br><ul><li><p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p><br></li><li><p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p><br></li><li><p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p><br></li><li><p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p><br></li></ul><br>Qualifications<br><ul><li><p><strong>Education &amp; Experience: </strong>Diploma or Bachelor’s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1–2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p><br></li><li><p><strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization.&nbsp; strong foundational knowledge in drafting construction BOQs and SOWs.</p><br></li><li><p><strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p><br></li><li><p><strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p><br></li></ul><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>Role Summary</strong></p><br><br><p>We are seeking a highly motivated and detail-oriented Engineer Assistant to join the talabat<br> mart (tMart) Operations team. In this role, you will serve as the core technical focal point<br> handling dark store expansion details, layouts, procurement documentation, and day-to-day<br> facility maintenance tracking. You will play a pivotal role in designing store layout developments, drafting construction-related technical documents, and supervising third-party contractors across civil, electrical, and piping disciplines to ensure our rapid grocery fulfillment infrastructure operates seamlessly.</p><br><br><p><strong>What’s On Your Plate?</strong></p><br><br><p><strong>Expansion &amp; Layout Development:</strong></p><br><br><ul><li><p>Technical Expansion Focal Point: Serve as the primary point of contact for all technical expansion details, collaborating with stakeholders to translate dark store requirements into actionable site project scopes.</p><br><br></li><li><p>Layout Development &amp; Enhancement: Develop initial store layouts and propose layout enhancements to maximize space utilization.</p><br><br></li></ul><br><p><strong>Procurement &amp; Technical Documentation:</strong></p><br><br><ul><li><p>Construction BOQ &amp; SOW: Formulate comprehensive Bills of Quantities (BOQs) and Scopes of Work (SOWs) for new store construction, physical expansions, and facility remodeling.</p><br><br></li><li><p>Needs-Based Engineering Packages: Directly evaluate operational store needs and build tailored technical procurement packages for hardware, layout fixtures, and physical infrastructure upgrades.</p><br><br></li></ul><br><p><strong>Facilities Maintenance &amp; Contractor Supervision:</strong></p><br><br><ul><li><p>Multidisciplinary Maintenance Tracking: Proactively identify, prioritize, and log maintenance needs across electrical networks, civil/structural store components, and water/refrigeration piping systems.</p><br><br></li><li><p>Schedules &amp; Lifecycle Management: Establish, coordinate, and monitor preventive maintenance schedules to minimize store downtime and prevent asset degradation.</p><br><br></li><li><p>On-Site Contractor Management: Serve as the main point of contact dealing with civil, electrical, HVAC and piping contractors, suppliers, and external service providers during installations or repair works.</p><br><br></li><li><p>Supervision &amp; Asset Handover: Actively supervise contractor execution on-site, enforcing quality control, adherence to SOW guidelines, and directing final receiving or asset handover back to store operations.</p><br><br></li></ul><br>What you need to be successful<br><ul><li><p><strong>Education &amp; Experience: </strong>Diploma or Bachelor’s degree in Civil, Electrical, Mechanical, or Industrial Engineering, Architecture, or a highly related technical field. Minimum of 1–2 years of practical experience in site coordination, drafting, facilities maintenance, or an engineering assistant capacity.</p><br><br></li><li><p><strong>Technical Layout &amp; Project Skills: </strong>Proficiency in drafting tools (e.g., AutoCAD or similar layout planning software) with an understanding of commercial or warehousing space optimization. strong foundational knowledge in drafting construction BOQs and SOWs.</p><br><br></li><li><p><strong>Contractor &amp; Site Management: </strong>Demonstrated experience dealing with or supervising external contractors, vendors, and suppliers across construction trades (civil, electrical, or piping).</p><br><br></li><li><p><strong>Core Competencies:</strong> Exceptional organizational skills to handle shifting maintenance needs, schedule planning, and technical execution updates across multiple dark store properties simultaneously.</p><br><br></li></ul><br>Who we are<br><p>Since launching in Kuwait in 2004, talabat, the leading on-demand food and Q-commerce app for everyday deliveries, has been offering convenience and reliability to its customers. talabat’s local roots run deep, offering a real understanding of the needs of the communities we serve in eight countries across the region.<br> <br> We harness innovative technology and knowledge to simplify everyday life for our customers, optimize operations for our restaurants and local shops, and provide our riders with reliable earning opportunities daily.<br> <br> At talabat, we foster an innovative environment where our talabaty employees can strive to create a positive impact across the region through the use of our platform.</p><br><br> <br><br> </div>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring a Quality CSA Lead Engineer for major Oil &amp; Gas / Industrial EPC projects. If you have deep expertise in Civil, Structural, and Architectural (CSA) QA/QC and a strong background enforcing Total Energies standards , we want to hear from you. Key Responsibilities QA/QC Management: Establish and maintain the CSA Quality Management System in line with Total Energies specifications, PQPs, and international codes (ACI, ASTM, AISC, AWS, Eurocodes). Inspection &amp; Control: Lead inspections for earthworks, concrete pour cards, structural steel fabrication/erection, welding, grouting, and architectural finishes. TPIA Coordination: Manage Hold, Witness, and Surveillance points with Third-Party Inspection Agencies and laboratories. NCR Management: Drive root cause analysis (RCA), raise/close Non-Conformance Reports, and manage punch lists to client satisfaction. Team Leadership: Mentor field QA/QC teams and represent the quality department during client and Total Energies audits.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Preferred candidate profile</b></p><ul><li>Education: Bachelors Degree in Civil Engineering.</li><li>Experience: 1215 years in CSA QA/QC within Oil &amp; Gas or Industrial EPC environments.</li><li>Leadership: Minimum 5 years of experience in a Lead or Senior QA/QC capacity.</li><li>Certification: Certified ISO 9001:2015 Lead Auditor. Certified QA/QC Engineer (CSWIP, BSI, or equivalent preferred)</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Minimum 5 years of experience as an Electrical Site Engineer on construction, industrial plant, or high-rise building projects. Strong experience in electrical systems, site execution, and installation works. Holder of a valid Senior Authorised Person (SAP) certification. Good command of English (written and spoken). Hands-on experience with LV/MV systems, cabling, panel installation, testing, and commissioning. Strong teamwork, communication, and coordination skills.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Electrical Engineering or Electrical &amp; Electronics Engineering. Minimum 5 years of experience as an Electrical Site Engineer on construction, industrial plant, or high-rise building projects. Strong experience in electrical systems, site execution, and installation works. Holder of a valid Senior Authorised Person (SAP) certification. Good command of English (written and spoken. Overseas project experience is preferred. Hands-on experience with LV/MV systems, cabling, panel installation, testing, and commissioning. Strong teamwork, communication, and coordination skills.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Support the team member of HSE team to prepare deliverable HSE documents such as HSE Plan and other relevant procedures for Project execution.</p><p>Support the HSE team leader for project Proposals in mostly overseas. Review &amp; prepares pre-qualification response to questionnaires documents from the client, ITB (Instruction to Bidder) review, and summary at the proposal stage. Prepare HSE documentation for clients/projects as per the requirements Support in providing training to HSE team member in project PQ (Project Pre-Qualification) and Project Proposal handling including Project Execution set up concerning Project HSE Management. Develop, implement and improve HSE management systems, processes and procedures to support business operations in accordance with ISO 45001 Develop HSE Alert &amp; HSE Risk Assessment for overseas project sites safety awareness Prepares weekly, quarterly, annual and other HSE related report covering the overseas project sites HSE activities. Support overseas projects with the identification of environmental aspects and determining the project objectives and target Carryout HSE training courses when required</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Knowledge And Qualifiction</h2><p>Degree holder in Engineering preferably major in Safety or Mechanical, Civil, Electrical, Industrial or Chemical</p><p>At least Ten (10) years experienced in field as an HSE engineer</p><p>At least Two (2) years experienced in PQ/ITB Document Process</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Planning Engineer-(EPCM)-Onsite<br><br><p><b>Job Description</b></p><br><br><br><p><b>Job Title Planning Engineer</b></p><br><br><p><b>Reports to Project Control Manager</b></p><br><br><p><b>Skillpool Project Services</b></p><br><br><p><b>Company: </b>KBR-Iraq<br><b>Project: </b>EPCM<br><b>Location</b>: Basra, Iraq<br>Rotation: 28/28</p><br><br><p>Required: Local National</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Roles and Responsibilities:</b></p><br><br><br><p><b>The Planning Engineer will report to the Project Control Manager. </b></p><br><br><p><b>Specific responsibilities include:</b></p><br><br><ul><li>Developing and maintaining Project Execution Schedules including Level 1/2/3 schedules using tools like Primavera P6. Ensure alignment on project assumptions with cost engineering, cost estimation, risk management and project management.</li><li>Implement Schedule requirements of Company into the planning and cascade these to the contractors accordingly.</li><li>Coordinate with engineering, procurement, and construction teams to gather inputs for the master schedule.</li><li>Monitor progress and update schedules regularly to reflect actual performance.</li><li>Identifying trends or potential slippages and report on these to the Project Engineers or the Project Services Lead.</li><li>Producing regular reports on progress against schedule. Reporting schedule performance index (SPI)</li><li>Deliver and maintain consistent and realistic plans and control structures for the project. Understand the list of plans required to execute the assigned project sub-elements and their interface to other sub-elements. Develop the activities, durations as per productivity norms, logic, resources and progress for the assigned project sub-elements, leading to the creation of the baseline schedule and its subsequent maintenance.</li><li>Develop, implement and comply with the planning and progress monitoring procedures.</li><li>Conduct the schedule monthly progress update, forecast, critical path and trend analyses for assigned elements, including any impact from interface areas. Implement and maintain the status reports. Provide regular and comprehensive schedule status reports to project engineers.</li><li>Liaise with and challenge Project Engineering personnel to ensure proper understanding of the key schedule sensitivities and drivers.</li><li>Develop contract key dates, milestones and Project Hub plan dates that align with the overall project schedule.</li><li>Participate in evaluating bid schedules and reviewing and assessing contractor plans to support contract award recommendations.</li><li>Develop contract sections for planning and progress monitoring and reporting. Review, verify, assess contractors reported progress and ensure that this is reflected in the project schedule.</li><li>Contribute to the translation of the project’s risk profile into the probabilistic risk model and understand the output, including the key risk drivers for the possible range of schedule completion dates. Track the criticality of the main paths to completion and float consumption.</li><li>Provide input data for and participate in benchmarking activities.</li><li>Contribute to close-out data to enable knowledge retention (lessons learned, project data compilation) at completion of work</li></ul><br><p><b>Education, Skills &amp; Experience:</b></p><br><br><p><b>Education</b></p><br><br><p>Bachelor’s Degree or Diploma in an any discipline</p><br><br><p><b>Experience and Skill set</b></p><br><br><ul><li>Minimum 8 years experience in Oil and Gas Industry in Planning Engineer roles.</li><li>Minimum 5 years experience in Oil and Gas related project delivery related projects</li><li>Ability to work and manage in a multi-cultural environment with good understanding of cost estimation parameters to be considered in Middle East.</li><li>Skill to actively engage with different project disciplines</li><li>Ability to work and manage in a multi-cultural environment</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Project Engineer is responsible to oversee and manage projects, ensuring they are completed safely, efficiently, and within budget constraints. This role involves coordinating with various stakeholders, including architects, engineers, contractors, and subcontractors, to plan and execute activities effectively. The Project Engineer is responsible for ensuring that project specifications and quality standards are met while adhering to project timelines. Additionally, they play a key role in monitoring project progress, identifying and addressing any issues or risks, and providing regular updates to stakeholders. Ultimately, the job purpose of a Project Engineer is to facilitate the successful completion of projects while maintaining high standards of quality and safety.</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Assist in project planning, scheduling, and coordination to ensure projects are completed on time and within budget.</p><br> <p>Review project specifications, drawings, and contracts to ensure compliance with design requirements and contractual obligations.</p><br> <p>Coordinate with architects, engineers, contractors, and subcontractors to resolve technical issues and ensure smooth project execution.</p><br> <p>Procure materials, equipment, and services required for operational activities, ensuring timely delivery and adherence to project specifications.</p><br> <p>Monitor progress, inspect work quality, and identify potential risks or delays, taking proactive measures to mitigate them.</p><br> <p>Prepare and maintain project documentation, including reports, drawings, change orders, and RFIs, to track project progress and ensure accurate record-keeping.</p><br> <p>Assist in cost estimation, budget management, and financial reporting to monitor project expenses and ensure cost-effectiveness.</p><br> <p>Coordinate with regulatory agencies to obtain necessary permits, approvals, and inspections, ensuring compliance with building codes and regulations.</p><br> <p>Communicate regularly with project stakeholders, including clients, consultants, and project teams, to provide updates on project status and address any concerns.</p><br> <p>Participate in project meetings, contribute to problem-solving discussions, and provide technical expertise and support to ensure project success.</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>proficiency in construction project management methodologies and techniques.</p><br> <p>Strong understanding of construction principles, techniques, and materials.</p><br> <p>Ability to read and interpret construction drawings, blueprints, and specifications.</p><br> <p>Excellent communication and interpersonal skills for effective collaboration with project teams and stakeholders.</p><br> <p>Problem-solving abilities to address challenges and find innovative solutions during project execution.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Project Planning L3<br>Construction Budgeting L3<br>Commercial &amp; Residential Construction L3<br>Contingency Workforce Management L3<br>Project Management L3<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA)<br>Bachelor's Degree in Civil Engineering or Engineering<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Planning Engineer implements and monitors engineering design stages planning processes, reviews and monitors consultant design plans and authorities approval to ensure that there is no clash between construction and design plans, efficient delivery of the design engineering to maintain construction plans progress without delay. Monitors procurement process to ensure of material deliverable on site as per construction plans. Coordinates between constructions need and consultants to deliver all required for construction on time</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Provide project planning/scheduling support and manage small team of planners.</p><br> <p>Manage the project schedules in accordance with the project work breakdown structure and ensuring the project that project schedules are developed.</p><br> <p>Ensure that project plans are regularly updated and within levels certainty to allow effective monitoring forecasting and control.</p><br> <p>Produce pre-design, design, tender and award, procurement, construction, and completion scheduling in order to depict the project and contractual requirements in compliance to the planning procedures.</p><br> <p>Analyze project requirements, preparation of resource and cost loaded planning schedules</p><br> <p>Produce resource histograms for manpower, material and submittals.</p><br> <p>Evaluate and analyze the progress through updated status reports in various formats based on the contract schedule in order to provide performance assessment and accurate forecasts.</p><br> <p>Coordinate and liaise with project managers to update the detailed works program</p><br> <p>Coordinate and liaise with subcontractors and authorities in relation to planning and programming matters for the various interfaces that exist on the project</p><br> <p>Liaise with the Project Director/Manager on the different scenarios to be simulated in the schedule Prepare “What if Analysis</p><br> <p>Review and evaluate the subcontractor’s schedules and reports and recommend necessary actions in order to align the subcontracted items in schedule to the contract schedule.</p><br> <p>Prepare the progress monitoring portion of the monthly report including the monthly schedule updates in order to incorporate in the monthly progress report submittal to the client and the management</p><br> <p>Participate in the progress and coordination meetings in order to discuss the status of the project.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>Knowledge in Engineering fundamentals </p><br> <p>Knowledge in Principles of planning and knowledge in Principles and practices of research and date collection.</p><br> <p>Familiarity with planning practices and the associated software such as Advance Primavera 6 </p><br> <p>Knowledge in Principles and practices of research and data collection </p><br> <p>Familiar with local and international standards in construction</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Resilience<br>AI Fluency<br>Quality<br>Leadership<br>Cash Flow Analysis L3<br>Project Resource Management L3<br>Project Tracking and Reporting L3<br>Revenue Forecasting L3<br>Agility<br>Primavera Project Planner L3<br><br><br><u><b>Education</b></u> <br>Bachelor's Degree in Engineering or any related field<br><br><br><br> </div>