Radiographer Jobs in Iraq

<p>&nbsp;ASSIGNMENT OBJECTIVES</p><p>The objectives are to:</p><p>1) Strengthen the existing draft evidence base on how social security entitlements are interpreted, applied and enforced, and extend it to the mechanisms through which workers raise and resolve complaints and appeals.</p><p>2) Secure tripartite and institutional validation of that consolidated evidence base.</p><p>3) Build the capacity of those who decide, administer and support social security claims, through curricula national training institutions can keep running after this agreement ends.</p><p>4) Place before decision-makers a prioritised set of options, with order-of-magnitude resource implications, for strengthening the legal framework and the routes by which workers pursue their entitlements.</p><p>4. SCOPE OF WORK AND METHODOLOGY</p><p>This agreement is the sole arrangement for this work stream and all activities are delivered within the agreed value. Bidders shall not assume that any event, expert engagement, expert fee, translation, printing, transport, entry permit, participant payment or venue requirement is met separately. Requirements outside the priced scope must be raised in the Technical and Financial Proposal and, if necessary, at the Inception Report stage.</p><p>Activity numbers, sizes, sequencing, locations and participant numbers are indicative and adjustable within the agreed value and period by written agreement. The deliverables in Section 6 are the binding outputs.</p><p>Component A. Strengthening the analytical report</p><p>1) Starting material. The ILO's draft report is the base text of the deliverable, not background material; proposals set out how they would appraise the full draft at inception and what they expect to remain, and the Inception Report fixes the remaining scope with the ILO on the basis of the draft as received. The ILO holds the rights in the draft, grants the Implementing Partner the right to use and modify it for this agreement, and determines authorship and acknowledgement in any publication.</p><p>2) Higher court analysis. Strengthen the analysis of how the higher courts interpret and enforce the framework, against a sample frame agreed at inception, bounded to the Court of Cassation and, for constitutionality challenges only, the Federal Supreme Court, and including first-instance and appellate decisions held in the same cassation file. Test, rather than assume, the premise that decided case law rests predominantly on Law No. 39 of 1971, Law No. 18 of 2023 having entered into force only on 26 November 2023. Establish which settled principles carry over to Law No. 18 of 2023, which are displaced and which the transitional provisions leave uncertain, and where liability falls when contributions were never paid or the worker never registered. Identify the procedural requirements that operate as barriers to claimants, including limitation periods, time limits for objecting to an administrative decision, and the medical assessment of invalidity and employment injury.</p><p>3) Enforcement. Provide a qualitative chapter on enforcing judicial decisions, drawing on the case sample and key informants and identifying the principal obstacles to executing judgments. A separate empirical study of execution files is not required and shall not be priced.</p><p>4) Legal framework. The review covers Law No. 18 of 2023, Law No. 39 of 1971, labour court and cassation procedure, and the constitutional provisions on social security entitlement. Labour Law No. 37 of 2015 is reviewed only where it governs social security claims: proof of the employment relationship, labour court jurisdiction and procedure, and labour inspection and the sanctions on employer registration and contribution compliance. No general review of that Law, or of constitutional labour protections, is in scope.</p><p><br></p><p>REQUIRED EXPERTISE OF THE IMPLEMENTING PARTNER</p><p>The Implementing Partner shall be a legally registered non-profit entity, such as a non-governmental organisation, research institution, university, legal institute or intergovernmental organisation, operating or able to operate in Iraq. It may be an ILO constituent organisation or affiliated member, or a non-constituent organisation meeting all other criteria. It shall practise non-discrimination in selecting participants. It shall not appear on any United Nations ineligibility or debarment list, be subject to European Union restrictive measures or appear in the EU Financial Sanctions Database, and shall have no history of failed obligations or prohibited conduct. Before award the ILO screens the proposed partner, its governing body and its senior management against these lists, under the Terms and Conditions applicable to Implementation Agreements, incorporated by reference under Section 16.</p><p>Bidders shall meet the following criteria. Each criterion specifies the documentary evidence required.</p><p>1) Organisational capacity and legal status. Established governance and internal financial controls, and at least three years of operational experience in Iraq or the Middle East region. Evidence: registration certificate; organisational profile; governance charter or by-laws; two years of audited financial statements.</p><p>2) Financial administration capacity. Capacity to manage donor funds at the scale of this agreement and to administer multiple expert engagements and event budgets transparently. Evidence: audit reports from two prior projects of comparable scale; reference letters from two prior funders; dedicated project account capability.</p><p>3) Capacity to mobilise specialised legal expertise. Senior legal expertise, in-house or through a roster of external experts, of the calibre required for analytical refinement, for peer review by senior judges and lawyers, and for training, together with social security administration and complaints-handling expertise. Evidence: how such expertise is mobilised; curricula vitae or profiles of indicative experts; one comparable assignment.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all environmental health & safety and quality assurance requirements and goals.<br> Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure data accuracy and update of equipment inventory database.<br> Ensure that related data related to activities meet the requirements.<br> Process excess documentation for all controlled and non-controlled excess equipment and materials.<br> Review, reconcile, adjust and process all inventory transactions.<br> Process and coordinate equipment transfers.<br> Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.<br> Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.<br> Assist with scrap metal processing and preparation for disposal or recycling.<br> Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.<br> Perform additional duties and projects assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: minimum 4 or more years’ experience handling waste management and disposal activity.<br> Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.<br> Ability to operate or learn disposal collection equipment and material handling equipment.<br> Ability to communicate effectively with supervisors and team members.</p> <h4>Knowledge, Skills, and Abilities</h4> <ul> <li>Prior proven experience in property disposal operations with defense reutilization.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li> <li>Basic recordkeeping and reporting skills.</li> </ul> <h4>Physical Requirements</h4> <ul> <li>Frequently lift and carry materials weighing up to 25 kg.</li> <li>Stand, walk, bend, climb, kneel, and work for extended periods.</li> <li>Operate manual and powered equipment safely.</li> <li>Work in dusty, noisy, and outdoor environments.</li> <li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li> </ul> <h4>Working Conditions</h4> <ul> <li>Outdoor and industrial work environment.</li> <li>Exposure to heat, dust, noise, and moving equipment.</li> <li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li> </ul> <h4>Performance Expectations</h4> <ul> <li>Complete disposal operations safely, efficiently, and on schedule.</li> <li>Maintain high standards of cleanliness throughout assigned work areas.</li> <li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li> <li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li> </ul> <h4>Education</h4> <p>A high school diploma or GED (General Education Diploma). Certifications or 4 years’ substitute experience in waste management and disposal services will be acceptable.<br> Valid Iraqi driver’s license (if operating company vehicles).</p> <h4>Security Vetting</h4> <p>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language Skills</h4> <p>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience supporting Department of State.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Knowledge, Skills and Abilities</h4> <ul> <li>Knowledge of the principles and processes involved in quality control management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.<br> Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<h2>The role</h2><p>This is an exciting opportunity for an experienced QA/QC Lead to join our Iraq Business Unit.</p><h2>Our Clients and Projects</h2><p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><h2>What we can offer</h2><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><h2>Job Objectives:</h2><p>The QA/QC Lead will support the delivery of Quality and materials Inspection activities as part of a broader asset integrity management programme for major oil and gas operating assets. The role will be responsible for undertaking Quality assessments, supporting Quality studies, developing technical deliverables and providing engineering expertise to multidisciplinary teams involved in the operation and maintenance of oil and gas facilities. The successful candidate will work as part of Wood's Iraq team and contribute to the ongoing Quality reliability and performance of critical production assets.</p><h2>Nationality Requirement:</h2><p>This position is open to Iraqi nationals only .</p><h2>Core Responsibilities:</h2><ul><li>Directly supervise and lead QC inspectors and NDT personnel, fostering a collaborative and high-performing team environment. Define individual responsibilities, provide effective training and mentorship, and conduct performance evaluations. Schedule and assign work for efficient workflow and adherence to production schedules.</li><li>Monitoring of all Quality control and surveillance activities for several construction contracts, including planning and implementation by Contractors Quality control plans and Inspection Test Plans.</li><li>Supervise and control the Contractor s to carry out the Quality Control &amp; Surveillance works during prefabrication and under construction to check that the work is in conformity with COMPANY specifications and procedures</li><li>Prepare / Develop Quality Control Procedures as required such as NDT, Inspection, Coating as required in line with TEEPRH</li><li>Coordinate with TPI agencies, Suppliers, other affiliates and discipline for inspection and surveillance monitoring of the Project.</li><li>To supervise and control the Critical activities, such as welding, non-destructive examinations, and performance testing. (Including increased inspection levels when performance requirements are not met)</li><li>To check all the process of the field joint, coating traceability, welding, NDT, hydrotest, SAT till the RFC and FRSU.</li><li>Manage non-conformance reports (NCRs), initiating root cause analysis and driving corrective action implementation.</li><li>Report and Update all Quality issues on site together with a regular and brief description of all non-conformances issued and all related correction, corrective, and preventive actions</li><li>Maintain Quality documentation and records for each area of activity, and system index for all discipline works and each file and records.</li><li>Ensure inspection equipment used in the project are calibrated, and certified by independent, recognized, &amp; accredited testing laboratory as per their manufacturer recommendations</li><li>Ensure the receipt, control, and transmission of all Contractors' documents</li><li>Monitor and trend quality key performance indicators (KPIs) to identify areas for improvement.</li><li>Review and audit the Quality Management System (QMS) to ensure internal and external compliance.</li><li>Assist with complaint resolution and implement corrective and preventive actions (CAPA).</li><li>Participate actively in daily production meetings, providing QC and NDT updates.</li><li>Coordinate equipment calibration and verification, maintaining accurate records.</li><li>Produce detailed reports, presentations, and assignments regularly to a high standard.</li><li>Foster open communication with team members, colleagues, and stakeholders.</li><li>Possess excellent written and verbal communication skills.</li><li>Strong problem-solving and decision-making skills with the ability to think independently.</li><li>Comprehensive knowledge of mechanical and electrical commissioning procedures.</li><li>Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Access) and Adobe Acrobat.</li></ul><p><strong>Desired Candidate Profile</strong></p><h2>What makes you remarkable?</h2><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected: Bachelor's Degree in Mechanical Engineering, or related discipline. AMPP/NACE Senior Corrosion Technologist or equivalent preferred. API 571 certification preferred. API 580 certification adventageous.</p>

<p>Wood is recruiting for an HSE Lead to join its Iraq business unit focusing on supporting the delivery of HSE activities as part of a broader asset Safety management program for major oil and gas operating assets. This role is a full-time on-site role in Kirkuk, Iraq with travel requirement.</p><p>The role</p><p>This is an exciting opportunity for an experienced HSE Lead to join our Iraq Business Unit.</p><p>Our Clients and Projects</p><p>Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><p>Job Objectives:</p><p>The HSE Lead will support the delivery of HSE activities as part of a broader asset Safety management programme for major oil and gas operating assets. The role will be responsible for undertaking HSE assessments, supporting Safety studies, developing technical deliverables and providing engineering expertise to multidisciplinary teams involved in the operation and maintenance of oil and gas facilities. The successful candidate will work as part of Wood's Iraq team and contribute to the ongoing Saftey, reliability and performance of critical production assets.</p><p>Core Responsibilities:</p><ul><li>Review and acceptance of the Contractors HSE plan.</li><li>Ensure the implementation of the Project HSE Management System (plans, procedures and specifications) and Contractual Security Requirements for all aspects of the work.</li><li>Ensure that Operational HSE requirements are fully addressed in all aspects of design and that the design complies with TOTAL HSE Company Rules and General Specifications.</li><li>Maintain a high awareness of industry and professional best practices.</li><li>Provide specialist advice, supports and technical assistance to the Project Manager and Construction Manager on HSE matters.</li><li>Monitor the DBOOM contractor, Pipeline installation contractor and subcontractor s activities to ensure adherence to HSE requirements.</li><li>Review all HSE procedures and follow up their strict implementation on Project scope and work sites.</li><li>Take part to the Permit to Work daily and Toolbox Talks related to work activities.</li><li>Full awareness of SIMOPS dossiers for simultaneous operations between Operations and Project.</li><li>Participate in Job Risk Assessment, request new JRA s, review, propose and ensure adequate risk mitigation measures, in full consideration of site operations.</li><li>Ensure Job Risk Assessment findings are communicated, understood and implemented on site.</li><li>Assist to Site Construction Project team with effective control on site construction yards (e.g., accommodation hygiene, potable water management, handling of chemicals/COSHH, H2S, health surveillance, management of hazardous substances, lifting etc.).</li><li>Assist with supporting the required HSE competencies across the Site Construction Project team: support HSE Superintendent, APLO/SLS with organization trainings of the personnel on site.</li><li>Participate in the preparation of material to enhance awareness on any areas for improvement.</li><li>Ensure implementation of the incident / accident management system (reporting analysis, recommendations, development, of action plans and monitoring implementation.</li><li>Conduct, Coordinate, participate and monitor all HSE audits, reviews, incident and accident investigation, etc.</li><li>Assist with preparation and delivery of bridging documents to support the project teams</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Expected: Bachelor s degree in engineering or construction field. 10 to 15 years of experience in the oil industry, with significant experience in HSE Management. Previous experience under SIMOPS works will be considered as a plus. Team player with ability to work collaboratively across complex project teams and interface between interdisciplinary departments and within an international team Kirkuk residency is preferred Fluent in English, Arabic is a plus Personal attributes: The job holder shall be fully accountable and directly responsible for: Organizing frequent site visits and main subcontractors. Full implementation of approved Project HSE Plan and contractual HSE requirements in all activities of the Projects by company team, contractor and subcontractors. Creation of safety and security awareness and promotion of best practices with adequate emphasis on COMPANY Golden Rules. Ensuring adequate training of personnel involved in the work on HSE related matters.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><br>Project Director<br><br>Sector: Oil &amp; Gas<br><br>Rotation: No. This is a residential basis role with R&amp;R periods<br><br>Work Location: Iraq<br><br>Requirements:<br><br>15+ years experience in oil and gas project management working for an oil and gas operator or major EPC company.<br><br>Must have led a full-cycle execution of a gas processing plant from FEED through to commissioning and handover.<br><br>Sour gas, H2S experience is a must<br><br>Middle East Project Management experience<br><br>Education:<br><br>Engineering Degree in Process, Chemical, Medical or Petroleum Engineering<br><br>Let op: vacaturefraude<br><br>Helaas komt vacaturefraude steeds vaker voor. We waarschuwen je voor mogelijke misleiding:<br>* Wij zullen nooit via WhatsApp of in een videogesprek vragen om jouw persoonlijke gegevens (zoals een kopie van je ID, bankgegevens of BSN).<br>* Twijfel je over de echtheid van een vacature of contactpersoon? Neem dan altijd rechtstreeks contact met ons op via de officiële contactgegevens op onze website.<br> <br>Important: job fraud<br> <br>Unfortunately, job fraud is becoming more common. Beware of such scams:<br>* We will never ask for personal information (such as a copy of your ID, bank details, or social security number) via WhatsApp or during a video call.<br>* If you're unsure whether a vacancy or contact person is legitimate, please reach out to us directly using the official contact details on our website.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Project Director, Project Manager, Sour Gas, H2S, Gas Plant, Gas Processing Facilities, Early production facilities, EPF <br> </div>

<p><h4>Duties</h4> <p><strong>·</strong> Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> <strong>·</strong> Comply with all environmental health & safety and quality assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> <strong>·</strong> Provide oversight of all material handling and heavy equipment support operations.<br> <strong>·</strong> Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.<br> <strong>·</strong> Schedule daily work assignments of personnel.<br> <strong>·</strong> Review work orders and support requests to determine safety requirements, permitting, and equipment needs.<br> <strong>·</strong> Manage all work order activity to ensure that all work is properly documented and submitted for recording.<br> <strong>·</strong> Provide reports and data - both required and ad hoc.<br> <strong>·</strong> Ensure adequate supplies and materials are ordered for department.<br> <strong>·</strong> Ensure personnel are properly trained in equipment operation.<br> <strong>·</strong> Monitor and evaluate performance of personnel.<br> <strong>·</strong> Perform additional duties and projects as assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic transportation movement request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.<br> Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US government issued security clearance or moderate risk public trust (MRPT) or be able to obtain a favorable MRPT certification or US government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.<br> Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensures data accuracy and update of equipment inventory database.<br> Ensure that related data related to activities meet the requirements.<br> Process excess documentation for all controlled and non-controlled excess equipment and materials.<br> Review, reconcile, adjust and process all inventory transactions.<br> Process and coordinate equipment transfers.<br> Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.<br> Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.<br> Assist with scrap metal processing and preparation for disposal or recycling.<br> Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.<br> Perform additional duties and projects assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: minimum 4 or more years’ experience handling waste management and disposal activity.<br> Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.<br> Ability to operate or learn disposal collection equipment and material handling equipment.<br> Ability to communicate effectively with supervisors and team members.</p> <h4>Knowledge, Skills, and Abilities</h4> <ul> <li>Prior proven experience in property disposal operations with Defense Reutilization.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li> <li>Basic recordkeeping and reporting skills.</li> </ul> <h4>Physical Requirements</h4> <ul> <li>Frequently lift and carry materials weighing up to 25 kg.</li> <li>Stand, walk, bend, climb, kneel, and work for extended periods.</li> <li>Operate manual and powered equipment safely.</li> <li>Work in dusty, noisy, and outdoor environments.</li> <li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li> </ul> <h4>Working Conditions</h4> <ul> <li>Outdoor and industrial work environment.</li> <li>Exposure to heat, dust, noise, and moving equipment.</li> <li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li> </ul> <h4>Performance Expectations</h4> <ul> <li>Complete disposal operations safely, efficiently, and on schedule.</li> <li>Maintain high standards of cleanliness throughout assigned work areas.</li> <li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li> <li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li> </ul> <h4>Education</h4> <p>A high school diploma or GED (General Education Diploma). Certifications or 4 years’ substitute experience in waste management and disposal services will be acceptable.<br> Valid Iraqi driver’s license (if operating company vehicles).</p> <h4>Security Vetting</h4> <p>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language Skills</h4> <p>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience supporting Department of State.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other Knowledge, Skills and Abilities</h4> <ul> <li>Knowledge of the principles and processes involved in Quality Control Management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <ul> <li><strong>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</strong></li> <li>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li> <li>Provide oversight of all material handling and heavy equipment support operations.</li> <li>Primary responsibilities will be the safety and professional operations of a daily multi-national workforce and ensuring that all work requests are completed.</li> <li>Schedule daily work assignments of personnel.</li> <li>Review work orders and support requests to determine safety requirements, permitting, and equipment needs.</li> <li>Manage all work order activity to ensure that all work is properly documented and submitted for recording.</li> <li>Provide reports and data - both required and ad hoc.</li> <li>Ensure adequate supplies and materials are ordered for department.</li> <li>Ensure personnel are properly trained in equipment operation.</li> <li>Monitor and evaluate performance of personnel.</li> <li>Perform additional duties and projects as assigned.</li> </ul> <h4>Required</h4> <p>Minimum acceptable experience level: Two (2) years’ experience with horizontal earthwork and material handling equipment including forklifts, cranes, loaders, bulldozers, skid steers, and semi-tractor trucks.</p> <h4>Knowledge, skills, and abilities:</h4> <ul> <li>Good time management skills and able to multi-task using various types of cranes and rigging gear.</li> <li>Knowledge of proper loading techniques and forklift weight capacities.</li> <li>Ability to lift up to 30 pounds, bend, stoop, and climb in and around construction type equipment and work in adverse climatic conditions.</li> <li>Ability to coordinate and complete basic Transportation Movement Request (TMR).</li> <li>Prior experience in working with a multi-national workforce.</li> <li>Ability to extract information to produce reports.</li> <li>Ability to communicate with a wide variety of colleagues and customers.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers’ license from home of record.</p> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or Moderate Risk Public Trust (MRPT) or be able to obtain a favorable MRPT certification or US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant overseas contract experience.</li> <li>Previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit / 50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><p><i><strong>#Wood #Iraq #Basra #Mechanical Engineer</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Mechanical Engineer&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p><span>Wood has been awarded an Onshore Project to support an International Client operation by providing Brownfield Engineering &amp; Design Services. The Vision of this Contract is to enhance the production &amp; assets integrity across various locations. Team of Engineers and Designers based in Basra and Dubai supports execution of these projects. Projects under this contract focuses on Flare system revamps/re-ignition, Rehab of aging assets, BTEX emission control, Flare Gas Recovery &amp; Replacement/upgrade of obsolete equipment, piping &amp; systems.</span></p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives:</u></strong></p><br><ul> <li><span>To always promote safe behavior</span></li> <li><span>To ensure that all work is completed without compromise to quality and is delivered according to the project schedule.</span></li> <li><span>To liaise with the Client’s Engineering, Operations and Maintenance staff as required to ensure a consistent approach to project completion.</span></li> <li><span>To produce and verify piping engineering and design deliverables as and when required.</span></li> <li><span>To co-ordinate with other disciplines during all stages of design development, construction, pre-commissioning, and start-up</span></li> <li><span>To provide technical support to site as required</span></li> <li><span>To assist in the coordination of all activities related to Piping engineering and design.</span></li> <li><span>To identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required.</span></li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><span><strong>Expected:</strong></span></p><br><ul> <li><span>Bachelor’s degree in an Engineering discipline</span></li> <li><span>Minimum of 5-7 years piping design engineering experience in the oil and gas industries.</span></li> <li><span>Onshore Oil and Gas related design experience.</span></li> <li><span>Familiarity with International Design Guidelines and Standards.</span></li> <li><span>A determination to continually improve safety in all aspects of plant design and operation.</span></li> <li><span>Exposure to typical software packages (Auto Cad / PDMS / Micro station / PDS) that are used in piping engineering and design.</span></li> <li><span>Extensive Brown field and green field experience in the oil and gas industry.</span></li> <li><span>Proven capability in an engineering design company.</span></li> <li><span>Experience of site-based project work involving field engineering and understanding of construction, commissioning, operations, or maintenance relativity is preferred.</span></li> <li><span>Experience of working with multi-national and multi-cultural project teams is strongly preferred. Commercially / contractually aware and able to manage design budgets.</span></li> <li><span>A determination to continually improve safety in all aspects of plant design and operation.</span></li> <li><span>Experience of participation in HAZOP &amp; HAZID studies is essential.</span></li> <li><span>Familiarity with typical software packages that are used in pipeline engineering and designing.</span></li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for providing hardware and software on-site and remote support, this position requires an experienced multi-discipline technologist capable of working independently and as part of a local and corporate team. Receives trouble reports for IT equipment and software via telephone, email, and service tickets. Assesses problem reports, performs corrective actions in accordance with enterprise work instructions, and delivers deskside support to internal customers, both in-person and via remote support tools. Baselines and deploys new equipment to users. Trains company personnel in technology solutions. Serves as a technical resource. Provides problem-solving support to computer users. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Primary support and interface with site Information Management to ensure all Service Desk resources are utilized in the most efficient manner. + Assists customers with daily functions of computer, network, and software management for the site and all users. + Provides immediate response to all customers who come to the Service Desk. + Provides person to person interaction involves troubleshooting, information exchange and help with ticket submission and issues. + Provides telephone customer support for incoming and follow up calls used for initial troubleshooting. + Remedy call management software and other tools, to log and manage trouble tickets. + Must have the technical ability to accurately determine call routing for trouble tickets that cannot be resolved immediately at the Service Desk. + Creates logon and email accounts for customers as needed. + Manages Network Services with Server Manager, Print Queue Management + Works within a small continuous improvement focused team. + Tracks and documents work performed to allow accurate reporting of all Service Desk activities. + Completes all tasks and assignments as requested by Supervisors and Management. + Utilizes Windows account management tools to perform account administration, password changes, group changes, and account expiration date changes. + Performs other duties and assignments as required + Other Technical IT Duties as required. Qualifications + Minimum Qualifications: + Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. Use the guide below to determine education and experience for this position. + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. + Experience: + Three years IT Service Desk Technician experience. + Certifications: + CompTIA A+, Microsoft 365 Certified: Modern Desktop Administrator Associate, CompTIA Network + + Skills: + Proficient in Microsoft Office 2010 or higher suite, data entry, copying, faxing, filing, assembling binders + Provides IT support for resolution of technical problems related to windows environments and windows applications, e-mail, database and security products. + Ability to isolate problem trends and troubleshoots recurring problems to find permanent solutions. + Ability to determine desktop and hardware related issues. + Excellent interpersonal skills. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a PTW Coordinator to join its Iraq business unit focusing on daily coordination of the Permit to Work (PTW) system for startup operations.</p><br><p>This role is a full-time on-site role in Kirkuk, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a PTW Coordinator to join its Iraq business unit focusing on daily coordination of the Permit to Work (PTW) system for startup operations.</p><br><p>This role is a full-time on-site role in Kirkuk, Iraq with travel requirement.</p><br><p><i><strong>#Wood #Iraq #Kirkuk #PTW Coordinator</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;PTW Coordinator&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions.&nbsp;</p><br><p>Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong>Job Purpose:</strong></p><br><p>Responsible for the daily coordination of the Permit to Work (PTW) system for startup operations. Maintain proper records of all permits and associated certificates raised in connection with operation and facility construction activities. Engage with O &amp; M, Construction &amp; Commissioning teams in the on-site monitoring and auditing of permit to work activities.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul> <li>Awareness of priorities, planning and scheduling of works scopes with responsibility to prepare and review all work permit documentation including JSA’s and Site Hazard assessments.&nbsp;</li> <li>Verify permits prior to approval by management team.&nbsp;</li> <li>Identification of plant, equipment, and process isolation requirements within the bounds of the Permit to Work System and in accordance with the O&amp;M Isolation Rules.&nbsp;</li> <li>Liaise with isolating authorities to ensure isolations are implemented Carry out Risk Assessment exercises and direct teams in Toolbox Talks as appropriate.&nbsp;</li> <li>Under direct instruction from O&amp;M Superintendents issue authorized permits. Monitor simultaneous and adjacent work scopes. Resolve of any conflicts between work scopes.&nbsp;</li> <li>Participation in worksite inspections and PTW audits.&nbsp;</li> <li>Ensure that all work permits issued are cross referenced (where applicable) to all interacting activity, and that all concurrent activities are carried out safely.&nbsp;</li> <li>Interface with FOD Operations on Brownfield projects to ensure proper permits are in place and the process is seamless minimizing work delays.&nbsp;</li> <li>Assist with coordination and forward planning to ensure that all permit requirements are pre-planned ready for start of next day's work.&nbsp;</li> <li>Taking a lead role in ensuring the SIMOPS is not compromised by the issue of conflicting permits.&nbsp;</li> <li>Tracks work permits through the entire life cycles from initiation to completion/close-out.&nbsp;</li> <li>Ensure record-keeping requirements are met. Maintains daily permit log, listing permit types issues, location and scope of work.&nbsp;</li> <li>Facilitate and participate in higher level PTW audits.&nbsp;</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Technical Diploma/ 10 years of Experience,</li> <li>Literate in the use of standard computer software programs. Word, Excel, etc</li> <li>English Communication skills / Team player/ Time-Management / Adaptability / Willingness to learn.</li> <li>Understanding of Oil &amp; Gas Process Operations, HSE practices and application in the field.</li></ul> </div>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all environmental health and safety and quality assurance requirements and goals.<br> Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure data accuracy and update of equipment inventory database.<br> Ensure that related data related to activities meet the requirements.<br> Process excess documentation for all controlled and non-controlled excess equipment and materials.<br> Review, reconcile, adjust, and process all inventory transactions.<br> Process and coordinate equipment transfers.<br> Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.<br> Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.<br> Assist with scrap metal processing and preparation for disposal or recycling.<br> Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.<br> Perform additional duties and projects assigned.</p> <h4>Required</h4> <p>Minimum acceptable experience level: minimum 4 or more years’ experience handling waste management and disposal activity.<br> Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.<br> Ability to operate or learn disposal collection equipment and material handling equipment.<br> Ability to communicate effectively with supervisors and team members.</p> <h4>Knowledge, Skills, and Abilities</h4> <ul> <li>Prior proven experience in property disposal operations with defense reutilization.</li> <li>Experience operating heavy equipment to include up to a 30K forklift, extended reach forklift, material handler, grappler (excavator), front end loader, and material shredders.</li> <li>Experience with cutting torches to include plasma cutters.</li> <li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment requiring handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li> <li>Basic recordkeeping and reporting skills.</li> </ul> <h4>Physical Requirements</h4> <ul> <li>Frequently lift and carry materials weighing up to 25 kg.</li> <li>Stand, walk, bend, climb, kneel, and work for extended periods.</li> <li>Operate manual and powered equipment safely.</li> <li>Work in dusty, noisy, and outdoor environments.</li> <li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li> </ul> <h4>Working Conditions</h4> <ul> <li>Outdoor and industrial work environment.</li> <li>Exposure to heat, dust, noise, and moving equipment.</li> <li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li> </ul> <h4>Performance Expectations</h4> <ul> <li>Complete disposal operations safely, efficiently, and on schedule.</li> <li>Maintain high standards of cleanliness throughout assigned work areas.</li> <li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li> <li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li> </ul> <h4>Education</h4> <p>A high school diploma or GED (General Education Diploma). Certifications or 4 years’ substitute experience in waste management and disposal services will be acceptable.<br> Valid Iraqi driver’s license (if operating company vehicles).</p> <h4>Security Vetting</h4> <p>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <h4>Language Skills</h4> <p>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <h4>Medical</h4> <p>Successfully complete and pass the medical and drug examinations as required by the company and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience supporting Department of State.</li> <li>Experience working with the company.</li> </ul> <h4>Other Knowledge, Skills, and Abilities</h4> <ul> <li>Knowledge of the principles and processes involved in quality control management.</li> <li>Successful management of multiple sites in geographically dispersed locations.</li> <li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li> <li>Exercise sound judgment and make decisions independently.</li> <li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <h4>Working and Living Conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p>Wood is recruiting for an Electrical &amp; Instrument Supervisor ((Iraqi National) to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and standards. This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><p>Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com</p><p>Diversity Statement We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.</p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected: Bachelor s degree in electrical engineering, 5 to 10 years of experience in the oil industry, with significant experience with SIMOPS works, Strong understanding of Oil &amp; Gas International Codes and Standards, Proactive and team-oriented approach with the ability to work collaboratively across complex project teams. Strong technical and problem-solving skills, Excellent communication and interpersonal skills, Ability to work effectively under pressure, Detail-oriented with strong organizational skills.</p><p>Wood is recruiting for an Electrical &amp; Instrument Supervisor ((Iraqi National) to join its Iraq business unit focusing on receiving and verifying all electrical equipment, ensuring conformity to project specifications and standards. This role is a full-time on-site role in Basra, Iraq with travel requirement. #Wood #Iraq #Basra #Electrical &amp; Instrument Supervisor</p><p>The role</p><p>This is an exciting opportunity for an experienced Electrical &amp; Instrument Supervisor to join our Iraq Business Unit.</p><p>Our Clients and Projects</p><p>Designing the future. Transforming the world. This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production. The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24 , ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities. Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><p>Job Objectives:</p><ul><li>Receive and verify all electrical equipment, ensuring conformity to project specifications and standards.</li><li>Coordinate and schedule equipment deliveries to the site, planning and managing logistics for all electrical equipment.</li><li>Develop and implement preservation plans for electrical equipment on-site, ensuring proper maintenance until installation.</li><li>Supervise the installation of all electrical equipment.</li><li>Coordinate with other disciplines to ensure site readiness, including foundation preparation and electrical interfaces.</li><li>Be proactive in addressing potential issues and ensuring smooth installation processes.</li><li>Implement and oversee QA/QC procedures during equipment installation, conducting inspections to ensure compliance with quality standards.</li><li>Manage and coordinate electrical construction activities, resolving any on-site technical issues.</li><li>Assist in pre-commissioning and commissioning of electrical systems, ensuring all systems meet performance criteria.</li><li>Prepare and manage the hand-over of electrical systems, ensuring all documentation is complete and accurate.</li><li>Interface between interdisciplinary departments and within international teams, ensuring seamless integration of electrical systems</li><li>Maintain and update technical documentation, including technical reports and specifications.</li><li>Troubleshoot and resolve electrical issues, providing technical support as needed.</li><li>Monitor a team of contractor s electrical technicians, providing guidance and training as necessary.</li><li>Monitor and control project costs related to electrical work, identifying, and implementing cost-saving measures.</li><li>Develop and manage electrical work schedules, ensuring timely completion of all electrical activities.</li><li>Assist in the procurement of electrical equipment and materials, reviewing vendor documentation for compliance.</li><li>Identify and mitigate risks related to electrical activities, implementing contingency plans as necessary.</li><li>Manage changes to electrical systems and documentation, evaluating and approving change requests.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s degree in electrical engineering, 5 to 10 years of experience in the oil industry, with significant experience with SIMOPS works, Strong understanding of Oil &amp; Gas International Codes and Standards, Proactive and team-oriented approach with the ability to work collaboratively across complex project teams. Strong technical and problem-solving skills, Excellent communication and interpersonal skills, Ability to work effectively under pressure, Detail-oriented with strong organizational skills.</p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Development and updating of the operations plan and maintenance program on a monthly basis.</p> <p>Record keeping for site data including as-builts, O&M manuals, commissioning documentation, design drawings, material and equipment cut sheets, etc.</p> <p>Develop and maintain the MSDS program and provide access as specified for all EC personnel.</p> <p>Develop, implement, and enforce a comprehensive safety program for all O&M Contractor staff, including periodic inspections and training programs.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Review and maintain current information manuals for building operations and repair services and maintain accurate equipment and personnel records.</p> <p>Act as the Program Manager’s principal operations representative.</p> <p>Responsible for the management of all O&M functions, including ensuring there are qualified personnel to meet staffing requirements, and the central planning, coordination, control, and actual performance of these functions.</p> <p>Manage the O&M and other assigned functions on site to ensure overall contract performance, which requires getting information to and from critical operating/supporting elements and directing/coordinating actions to ensure resources are fully utilized to properly perform the mission.</p> <p>Monitor system readiness, identify problem areas, and respond to mission requirements to perform contract requirements.</p> <p>Direct and monitor the preventive maintenance program; accept, process, coordinate, and assign work orders, projects, and large task assignments.</p> <p>Control resources; monitor staff proficiency and qualifications; monitor staff endurance; monitor the location and activities of assets; and coordinate the flow of information to and from O&M staff.</p> <p>Perform additional duties and projects assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong></p> <p>Minimum of 15 years’ experience in operations and maintenance services, with a minimum of 5 years’ experience in large facilities.</p> <p><strong>Knowledge, skills and abilities:</strong></p> <ul> <li>Demonstrated working knowledge of operations and maintenance activities for a small plant, overseas, or military facility.</li> <li>Demonstrated ability to manage required staff.</li> <li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED. A bachelor’s degree in business management, project management or similar discipline leading to a broad management background is preferred.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining until the expiration date with 8 blank pages. Valid drivers’ license.</p> <p><strong>Security vetting:</strong> Must be able to obtain and maintain a Secret US Government Clearance. Note: US citizenship is required to obtain Secret Clearance.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant experience, skills and knowledge of electrical, mechanical/HVAC, power generation, water systems for a large facility are strongly preferred.</li> <li>Relevant overseas operations management experience.</li> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors.</p> <p>This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Duties</h4> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br> Ensure Property Department compliance with Property Management and Control Procedures.<br> Conduct random compliance audits on all sites/departments in Iraq.<br> Develop and execute corrective action plans for audit deficiencies and inventory accountable property.<br> Mentor lower-level Property Staff and custodians in proper process and procedures as they relate to Government Property.<br> Identify problem areas and recommend viable solutions.<br> Perform physical inventories of Government Furnished Property (GFP) and Contractor Acquired Property (CAP), as directed by the Property Management and Control Procedures and/or the Logistics and Property Manager.<br> Ensure Government Property Identification numbers (GP) are properly assigned, prepare required schedule, and assist with identifying lost, damaged, and destroyed property as well as excessive consumption.<br> Work closely with Property Custodians to ensure overall accountability of assets.<br> Track and record movement of all types of Government property. This includes movement from one point to another within a contractor’s facility, movement between facilities for any purpose, and protection during movement.<br> Conduct country-wide property training on a yearly basis as well as establish training plans for new hire employees and refresher training.<br> Ensure compliance with Federal Acquisition Regulation (FAR), Statement of Work (SOW), and Standard Operating Procedures (SOP).<br> Develop processes and desktop procedures to maintain continuity of job performance.<br> Audit logs and status records to ensure completion of lost, damaged, or destroyed items.<br> Check LTDD packages for accuracy and completion.<br> Perform additional duties and projects as qualified to perform as assigned.<br> Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br> Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong> Five years’ experience with overseas Government contracts. Department of State contracts strongly preferred.</p> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Knowledge of FAR and industry leading practices regarding government property.</li> <li>Ability to clearly and concisely articulate services/requirements in writing.</li> <li>Ability to articulate in a clear and concise manner with Management and Trades Departments daily.</li> <li>Ability to demonstrate analytical and researching skills.</li> <li>Ability to perform the technical requirements efficiently and effectively.</li> <li>Ability to define problems, collect data, and propose solutions.</li> <li>Ability to read, interpret, and follow all Logistic Management procedures, policies, and guidelines.</li> <li>Ability to effectively present information and respond to questions.</li> <li>Excellent organizational and time management skills, with ability to prioritize effectively and work with a sense of urgency.</li> <li>Ability to lift materials and equipment weighing up to 50 lbs.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Understanding how inventory affects compensation.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong><br> An undergraduate degree is preferred but can be replaced with additional years of Government Property Administration.</p> <p><strong>Licenses and certifications:</strong><br> Valid driver’s license from home of record.<br> NPMA Certification or ability to obtain within one year.</p> <p><strong>Security vetting:</strong><br> Possessing a Moderate Risk Public Trust (MPRT) or be able to obtain a favorable MPRT certification prior to being hired is required.</p> <p><strong>Language skills:</strong><br> Sufficient English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong><br> Successfully complete and pass the medical and dental examinations as required for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. Each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams as appropriate.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality, and environmental requirements of all plans, procedures, and policies pertaining to the job.</p> <h4>Working and living conditions</h4> <p>This position may be in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of six days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p>Provides leadership and management to AMBP s guard force the ensuring the effective provision of security to facilities resident sand stakeholders. Regularly assesses and performance manages his team the guard force at AMBP; identifying any gaps in an individual s capability and providing relevant training to help them improve. Provides training and mentoring to the local guard force as specified by Control Risks and the AMBP hierarchy commensurate with the minimum standards required and exceeding them wherever possible. Ensures that the guard force at AMBP comply with Control Risks policies such as Anti-Bribery and Corruption and Voluntary Principles on Human Rights. Enforces minimum standards in all security duties including static guarding, access control, communications procedures and weapon handling. Records the allocation of resources to the local guard force and ensures these are well maintained and used effectively. Implements and maintains accurate training records for employees. Acts as advisor on all aspects of security to the AMBP hierarchy, where appropriate. Identifies non-compliance with Control Risks and / or Client s policies and procedures and escalates through management appropriately. Assesses the security situation as it applied to the Client s sites and areas of operations and works with the regional management team to make recommendations in line with the current intelligence and analysis. Identifies the conditions that will influence the physical safety of the Client s personnel and their operations and liaises with the management team in order to aid strategic operational decision-making.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 5 years Military or Policing experience. Minimum 2 years hostile environment experience. Experience of managing local national personnel in a hostile environment. Experience of working in a client facing role in a hostile environment. Demonstrable understanding of Control Risks organisational policies and SOPs. Fluency in English Language (CEFR C2 or equivalent). Proficient in the use of Microsoft Word, Power Point &amp; Excel.</p><h4>Qualifications and specialist skills</h4><ul><li>Minimum of an accredited L3 Close Protection certification</li><li>Minimum of FPOS IV/ FREC medical certification</li><li>Project Management Qualification (PRINCE 2, PMP, Agile, MSP etc)</li><li>Occupational Health &amp; Safety Certification (IOSH, NEBOSH etc)</li><li>Minimum of an accredited L4 Security Management certificatio</li></ul>

<p><h4>Duties</h4> <p>The operations manager will be based at the Baghdad Embassy Compound (BEC) site in Iraq and serve the operations and maintenance support services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for taking ownership of the site operational responsibilities to include directing the daily performance of the organization, planning, scheduling, and training processes to meet the requirements of the contract. This position will report to the OMSS program manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p> <ul> <li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li> <li>Comply with all environmental health & safety and quality assurance requirements and goals.</li> <li>Development and updating of the operations plan and maintenance program on a monthly basis.</li> <li>Record keeping for site data including as-builts, O&M manuals, commissioning documentation, design drawings, material and equipment cut sheets, etc.</li> <li>Develop and maintain the MSDS program and provide access as specified for all EC personnel.</li> <li>Develop, implement, and enforce a comprehensive safety program for all O&M contractor staff, including periodic inspections and training programs.</li> <li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li> <li>Review and maintain current information manuals for building operations and repair services and maintain accurate equipment and personnel records.</li> <li>Act as the program manager’s principal operations representative.</li> <li>Responsible for the management of all O&M functions, including ensuring there are qualified personnel to meet staffing requirements, and the central planning, coordination, control, and actual performance of these functions.</li> <li>Manage the O&M and other assigned functions on site to ensure overall contract performance, which requires getting information to and from critical operating/supporting elements and directing/coordinating actions to ensure resources are fully utilized to properly perform the mission.</li> <li>Monitor system readiness, identify problem areas, and respond to mission requirements to perform contract requirements.</li> <li>Direct and monitor the preventive maintenance program; accept, process, coordinate, and assign work orders, projects, and large task assignments.</li> <li>Control resources; monitor staff proficiency and qualifications; monitor staff endurance; monitor the location and activities of assets; and coordinate the flow of information to and from O&M staff.</li> <li>Perform additional duties and projects assigned.</li> </ul> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong></p> <ul> <li>Minimum of 15 years’ experience in operations and maintenance services, with a minimum of 5 years’ experience in large facilities.</li> </ul> <p><strong>Knowledge, skills and abilities:</strong></p> <ul> <li>Demonstrated working knowledge of operations and maintenance activities for a small plant, overseas, or military facility.</li> <li>Demonstrated ability to manage required staff.</li> <li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED. A bachelor’s degree in business management, project management or similar discipline leading to a broad management background is preferred.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining until the expiration date with 8 blank pages. Valid driver’s license.</p> <p><strong>Security vetting:</strong> Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain secret clearance.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant experience, skills and knowledge of electrical, mechanical/HVAC, power generation, water systems for a large facility are strongly preferred.</li> <li>Relevant overseas operations management experience.</li> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other responsibilities</h4> <ul> <li><strong>Safety:</strong> Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li> </ul> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit / 50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p> <p>Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Job Description</h4> <p>The quality construction inspector will support the U.S. Department of State contract in Iraq. Under specific direction, the inspector will apply knowledge and experience of facility systems in the construction and modification of horizontal and vertical applications and support services for LCC department. They will demonstrate knowledge of setting and meeting key performance indicators, to include the verification of compliance metrics in preliminary laydown, during construction phases and then final and acceptance inspections, utilizing the framework Amentum standards, OBO and DoS policies and regulations, local and international construction codes and standards (ICCS).</p> <p>This position will be responsible for providing oversight and collaboration of standards at construction sites, with the monitoring of construction teams, providing oversight in mechanical, electrical and plumbing functions, directing inspections and managing work requirements, utilizing skills and knowledge requiring flexibility, adaptability, and responsiveness. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p> <h4>Duties:</h4> <ul> <li>Provide specific support of construction techniques and improvements and facilitate verification of products and/or service support applications, recommend training, tools, and methods for sound and safe construction principles.</li> <li>Align the quality management function with the performance needs of the product line and/or service support application.</li> <li>Manage and maintain project portfolios, adhere to policies and procedures, the basis being ISO 9001:2015 standard requirements, understand OBO and DoS maintenance practices and policies, and USACE requirements.</li> <li>Maintain an audit schedule, and perform audits of procedures, reporting requirements, plans, programs, and keeping records, reviewing cut sheets, horizontal and vertical building codes.</li> <li>Conduct site inspection, verification of safety practices and procedures, material deliveries and product/materials standards.</li> <li>Record data and analyze performance of material testing, hardness, and slump testing, project change bulletins and change orders.</li> <li>Track deficiencies and work with management to define corrective action plans and close out deficiencies, understand CAPA principles and methods.</li> <li>Collect and analyze data to determine performance trends on mechanical, electrical and plumbing systems and assist in-house teams in repairs, oversee and direct sub-contractors work and products, be aware of new product lines, parts and manufacturing techniques.</li> <li>Prepare and provide daily, weekly and monthly reports to management, document progress and compliance by reporting and photographs, must obtain RSO photo badge approval.</li> <li>Ensure quality-related training is provided by the program and sub-contractor employees.</li> <li>Implement, maintain program instructions, plans, and SOPs. Ensure archives and libraries are reviewed and revised on a planned and scheduled timetable.</li> </ul> <h4>Required:</h4> <p><strong>Minimum acceptable experience level:</strong></p> <ul> <li>Five (5) years’ experience in quality assurance/control in construction projects.</li> <li>Five (5) years’ experience as a quality management professional, supporting a DoD or DoS program.</li> <li>At least two (2) years’ international experience in challenging locations, preferably the Middle East.</li> </ul> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Knowledge of all principles and processes involved in quality construction management.</li> <li>Ability to collect, analyze, and summarize data and to prepare clear and concise reports.</li> <li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures, a basic understanding of local customs and culture and language.</li> <li>Exercise sound judgment and make decisions independently and be able to take direction from leadership.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules, at multiple sites and projects.</li> <li>Must have excellent people skills, organizational and time management abilities.</li> <li>Expert computer skills, specifically in Microsoft Word, PowerPoint, and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> </ul> <p><strong>Education/Certification:</strong> Certification of quality construction inspector, or eight (8) years’ related experience and/or education.</p> <p><strong>Licenses and certifications:</strong> ISO 9001:2015 certification. Valid driver's license from home of record.</p> <p><strong>Security vetting:</strong> Must be able to obtain and maintain a secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Other responsibilities:</h4> <ul> <li><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</li> <li><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum quality policy and carry out job activities in compliance with applicable Amentum quality system documents and customer contracts. Each employee must read and understand his/her quality management and customer satisfaction responsibilities.</li> <li><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit / 50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><br></p><p>What makes you remarkable? At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world s most critical challenges.</p><p>Expected: 6-8 years in Commissioning / Field Operations activities. Experience in similar position (years): At least 3 years of experience in similar position during project, relevant site experience in an onshore field. Experience as Production Manager, Site Manager or equivalent is a plus. Knowledgeable of rules and specifications Knowledgeable of OPERCOM and ICAPS Knowledgeable of Engineering, Construction, Hook-up/commissioning and Start Up. Good communication skills and fluency in English Level / Diploma: Engineer Languages: English mandatory</p><p>The position will be based in Basra (Iraq) on rotational basis (4 weeks On /4 weeks Off) Duration 2/3 years</p><p>The role This is an exciting opportunity for an experienced Commissioning Process Lead to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production. The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24 , ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities. Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><p>What we can offer Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment. Commitment to continued professional development; development plans that are tailored to your individual needs and interests Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</p><p>Job Objectives: In this position, the main missions are: To adopt &amp; demonstrate an exemplary behavior with regard to HSSE requirements. To adopt and demonstrate an exemplary behavior with regard to the Company Ethics and Code of Conduct policy and to promote and enforce the Corporate Anti-Corruption Program within the project team. To ensure that latest digital and carbon footprint reduction initiatives are studied and implemented if possible.</p><p>Review the preparation of the Commissioning for systems which he is in charge of. This includes: procedures, reporting tools (ICAPS, planning, punch list control), requisition for equipment, spares, special tools and review of the Commissioning Dossier with particular attention to Operational Test Procedures. System / Sub System preparation, Start Up and Commissioning sequence. Ensure adequate involvement of Field Operations in Commissioning documentation review (particularly for OTs). To provide assistance to the Contractor during the detailed preparation of the Commissioning planning, in order to optimise the schedule by maximising the Commissioning activities to a minimum. To assist the Commissioning Manager in identifying and addressing all internal/external interface issues with respect to Commissioning. Throughout the preparation phase, liaise with corresponding Area engineers. To promote HSE behaviour within the commissioning activities and verify that HSE procedures are implemented by Commissioning Team. To witness the pre-commissioning activities performed by Contractor and ensure systems have reached the RFC status with associated punch list. To define, with Commissioning Manager, Commissioning specialist supervision/execution needs. To ensure progress (from ICAPS database) is in accordance with priorities defined in the Commissioning and Start-up sequence in order to reach the planned end date. To monitor and follow-up the execution of commissioning (including attendance to FATs at manufacturers premises) to achieve maximum productivity, minimize cost and achieve smooth handover. To validate the results of the operational tests for systems he is in charge of, ensuring adequate involvement of Field Operations. To co-ordinate Field Operations witnessing and assist in Handover preparation. To ensure together with the ICAPS coordinator the correct update of the Commissioning dossiers for the systems he has been assigned. To follow-up and approve punch list items entry / clearance. To prepare and supervise the material / spares / tools / first fill status during Commissioning. To ensure optimal vendor intervention planning. To be responsible for PID s conformity checks ( as commissioned documents) for all systems he is in charge of). To ensure that adequate care and maintenance/preservation and operation of equipment are carried out until handover to Field Operations. Controls Commissioning activities and identifies priorities to meet systems AOC status as per schedule for the systems he is in charge of. To ensure Vendor s recommendation for preservation procedures are applied and followed via CTR tool. To ensure Vendor s/equipment/package punch list coordination and input into ICAPS.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p>Expected: 6-8 years in Commissioning / Field Operations activities. Experience in similar position (years): At least 3 years of experience in similar position during project, relevant site experience in an onshore field. Experience as Production Manager, Site Manager or equivalent is a plus. Knowledgeable of rules and specifications Knowledgeable of OPERCOM and ICAPS Knowledgeable of Engineering, Construction, Hook-up/commissioning and Start Up. Good communication skills and fluency in English Level / Diploma: Engineer Languages: English mandatory

<p>Wood is recruiting for a GIS Coordinator to join its Iraq business unit focusing on development and execution of the Field concession program through the management of geospatial information, land allocation processes, and GIS services. This role is a full-time on-site role in Basra, Iraq on 5/2 (5 days ON and 2 days OFF) rotation, #Wood #Iraq #Basra #GIS Coordinator</p><p>The role</p><p>This is an exciting opportunity for an experienced GIS Coordinator to join our Iraq Business Unit. Our Clients and Projects Designing the future. Transforming the world. Wood is an integral part of operations in Iraq, and we are continuing to grow our footprint across the country. With a 90-year heritage, 10 major contracts and over 850 employees, we have the skills, expertise and asset knowledge to support clients to deliver energy security and decarbonisation ambitions. Wood excels in supporting our clients to deliver complex upstream and midstream oil and gas projects in Iraq delivering maintenance, modifications and engineering solutions. We are committed to decarbonising existing assets, producing cleaner energy and developing a sustainable national workforce, ensuring the long-term growth of the region.</p><p>What we can offer</p><ul><li>Meaningful and interesting projects Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><p>Job Objectives: This position supports the development and execution of the Field concession program through the management of geospatial information, land allocation processes, and GIS services. The role is responsible for maintaining and developing the centralized GIS database, supporting the GIS Management of Change (MOC) process, and providing accurate spatial information to support engineering, HSE, construction, UXO, and operational activities.</p><p>Activities: Leadership</p><ul><li>Perform all duties in compliance with HSE requirements and actively support the "Nobody Gets Hurt" initiative.</li><li>Collaborate with the GIS and UXO teams to plan, prioritize, and execute assigned work activities in accordance with project objectives and deadlines.</li></ul><p>Responsibilities</p><ul><li>Process land allocation and land use requests through the established GIS Management of Change (MOC) process, ensuring compliance with project procedures and approval workflows.</li><li>Prepare a wide range of GIS maps, spatial datasets, and cartographic products to support operational, engineering, HSE, and management requirements.</li><li>Perform GIS-based spatial analysis, conflict detection, and land use assessments to identify potential overlaps, constraints, and operational risks.</li><li>Receive, verify, validate, and maintain UXO Completion Reports within the GIS database, ensuring data integrity and completeness.</li><li>Perform verification and quality assurance/quality control (QA/QC) of field survey data, ensuring accuracy, completeness, consistency, and compliance with project standards, and report discrepancies where identified.</li><li>Utilize specialized equipment (GPS, DGPS, and geographic information system [GIS] devices) to survey, locate, trace, measure and record boundaries and infrastructure in the field.</li><li>Conduct field inspections and surveillance activities to monitor infrastructure, land use, environmental conditions, and operational activities, reporting anomalies such as spills, leaks, unauthorized activities, environmental breaches, and other management-directed observations.</li><li>Examine, compare, and reconcile historical and current spatial records, engineering documentation, and survey data to ensure accuracy and maintain a reliable GIS database.</li><li>Prepare detailed survey deliverables, including maps, plots, sketches, spatial datasets, technical reports, and supporting documentation using approved templates and procedures.</li><li>Process, validate, integrate, and maintain project as-built information, engineering drawings, survey data, and other geospatial datasets within the enterprise GIS environment.</li><li>Maintain GIS databases, ensuring data quality, version control, metadata compliance, and adherence to corporate GIS standards.</li><li>Coordinate with internal departments and contractors to collect, validate, and update spatial information, ensuring consistency across all project datasets.</li><li>Train, mentor, and provide technical guidance to local personnel in GIS systems, surveying techniques, spatial data management, and established GIS procedures.</li><li>Prepare periodic reports, statistics, dashboards, and spatial analyses to support management reporting and operational planning.</li><li>Develop, maintain, and improve GIS workflows, data models, and automation tools to enhance efficiency and data quality.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Diploma or bachelor s degree in geographic information systems (GIS), Surveying, Geomatics, Geography, Engineering, Topography, or a related discipline. A diploma may be substituted with a minimum of seven (7) years of relevant GIS experience supporting oil and gas operations. Demonstrated experience in GIS database development, spatial data integration, geodatabase management, data automation, and web mapping applications. Experience with Explosive Remnants of War (ERW) / Unexploded Ordnance (UXO) or humanitarian/commercial demining geodatabases is desired. The candidate shall possess technical proficiency in the following software and systems: ESRI ArcGIS Desktop, ArcGIS Pro, and AutoCAD. It is desirable that the candidate has experience with ArcGIS Enterprise/Server (v10.1 or higher), ArcGIS Online, ArcSDE geodatabases, and relational database management systems (RDBMS) such as Oracle or Microsoft SQL Server. The candidate shall demonstrate strong proficiency in Microsoft Office applications, including but not limited to advanced Microsoft Excel, Word, PowerPoint, and Outlook.</p><p>Skills:</p><ul><li>Good physical fitness (stamina) is required (20% of the job is fieldwork that involves working outdoors in all types of weather and over rough terrain, walking long distances and standing for extended periods while taking measurements).</li><li>The candidate must have excellent reading, writing, and spoken English proficiency and should be a strong communicator of technical language to native and non-native English speakers.</li><li>Desired skills include strong organizational abilities, attention to detail, problem solving, delivering solutions and ability to work in a fast-paced environment.</li><li>Demonstrated ability to prepare and deliver technical training and presentations.</li><li>Ability to work independently with minimal supervision as well as collaboratively within multidisciplinary and multicultural teams.</li><li>Ability to handle multiple job tasks simultaneously.</li></ul><p>Systems: ArcGIS ArcSDE Python Oracle SQL AutoCAD</p>