Residential supervisor Jobs

<p><b><br>Job Description</b></p><p>The HVAC/R Supervisor will be based at one of three Amentum sites in Iraq and support the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The HVAC/R Supervisor is responsible for oversight of all site HVAC/R operations, to include maintenance, repair, and installation of environmental control systems. This role requires practical knowledge of refrigeration theory, pipefitting, system layout, and troubleshooting.</p><br><p>This position is responsible for the overall operation and maintenance of HVAC/R equipment and systems and reports directly to the O&amp;M Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><br><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety remains the highest priority</li><li>Comply with all Environmental Health &amp; Safety (EHS) and Quality Assurance requirements</li><li>Provide necessary information and documentation to ensure compliance with applicable standards</li><li>Operate, maintain, and repair site HVAC/R systems including, but not limited to: air-cooled chillers, direct expansion units, air handling units, filters (including chemical biological filters where applicable), ductwork, dampers, actuators, fans, chilled water lines, heating and cooling systems, fan coil units, electric reheats, diffusers, vents, VAV boxes, exhaust systems, control valves, cooling coils, and ventilation systems supporting facilities such as laundry rooms, kitchens, and restrooms</li><li>Schedule personnel, including shifts and rotations, to maintain required service levels</li><li>Assign tasks and enforce standards of conduct and performance</li><li>Inspect and audit work in progress and completed work to ensure compliance with codes, quality standards, and customer expectations</li><li>Manage tools, equipment, and inventory to maintain accountability and support operational needs</li><li>Complete required reports, both quantitative and qualitative</li><li>Provide input on policies, procedures, and administrative requirements</li><li>Install and mount compressors, condenser units, and air handling equipment in accordance with engineering specifications and manufacturer recommendations</li><li>Maintain custodianship of assigned work areas, tools, equipment, and spare parts</li><li>Perform additional duties and special projects as assigned</li></ul><br><p><b>REQUIRED:</b></p><p><b>Minimum Acceptable Experience Level:</b></p><ul><li>Ten (10) years of HVAC/R experience, including at least two (4) years in a supervisory or lead role; <b>or</b></li><li>Equivalent combination of technical training, certifications, and hands-on HVAC/R experience</li></ul><p>Experience may be demonstrated through field work, vocational training, apprenticeship programs, or industry-recognized certifications.</p><br><p><b>Knowledge, Skills, and Abilities:</b></p><ul><li>Knowledge of applicable U.S. codes and International Mechanical Code (IMC) standards</li><li>Strong understanding of HVAC/R systems, operations, and repairs</li><li>Familiarity with supporting contract operations in an overseas environment</li><li>Ability to work in a fast-paced environment while managing multiple priorities</li><li>Cross-cultural awareness and ability to work within a diverse workforce</li><li>Strong organizational and time management skills</li><li>Proficiency in Microsoft Word and Excel</li><li>Ability to work effectively as part of a team</li><li>Strong communication skills, both verbal and written</li></ul><ul><li><b>Education:</b></li></ul><ul><li>High school diploma or GED required</li><li>HVAC vocational training, apprenticeship completion, or equivalent experience</li></ul><ul><li><br></li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or GED required</li><li>HVAC vocational training, apprenticeship completion, or equivalent experience</li></ul><ul><li> <b>Passport, Licenses and Certifications:</b> As part of pre-contingency requirements, <b>by the time the visa process starts</b>, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li></ul><ul><li>Valid drivers license from Home of Record</li><li>EPA Section 608 Certification required</li><li>HVAC licensing or certification is preferred; however, candidates without a formal license may qualify based on experience and demonstrated technical expertise</li><li>Candidates must be able to obtain any required certifications or credentials within 180 days of employment, if applicable</li></ul><ul><li> <b>Security Vetting:</b> Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.</li><li> <b>Language Skills:</b> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li> <b>Medical:</b> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li></ul>

<p><b>Job Description</b></p><p>The HVAC/R Supervisor will be based at one of three Amentum sites in Iraq and support the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The HVAC/R Supervisor is responsible for oversight of all site HVAC/R operations, to include maintenance, repair, and installation of environmental control systems. This role requires practical knowledge of refrigeration theory, pipefitting, system layout, and troubleshooting. This position is responsible for the overall operation and maintenance of HVAC/R equipment and systems and reports directly to the O&amp;M Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><h4><b><br></b></h4><h4><b>DUTIES:</b></h4><ul><li>Responsible for maintaining a safe workplace and ensuring safety remains the highest priority</li><li>Comply with all Environmental Health &amp; Safety (EHS) and Quality Assurance requirements</li><li>Provide necessary information and documentation to ensure compliance with applicable standards</li><li>Operate, maintain, and repair site HVAC/R systems including, but not limited to: air-cooled chillers, direct expansion units, air handling units, filters (including chemical biological filters where applicable), ductwork, dampers, actuators, fans, chilled water lines, heating and cooling systems, fan coil units, electric reheats, diffusers, vents, VAV boxes, exhaust systems, control valves, cooling coils, and ventilation systems supporting facilities such as laundry rooms, kitchens, and restrooms</li><li>Schedule personnel, including shifts and rotations, to maintain required service levels</li><li>Assign tasks and enforce standards of conduct and performance</li><li>Inspect and audit work in progress and completed work to ensure compliance with codes, quality standards, and customer expectations</li><li>Manage tools, equipment, and inventory to maintain accountability and support operational needs</li><li>Complete required reports, both quantitative and qualitative</li><li>Provide input on policies, procedures, and administrative requirements</li><li>Install and mount compressors, condenser units, and air handling equipment in accordance with engineering specifications and manufacturer recommendations</li><li>Maintain custodianship of assigned work areas, tools, equipment, and spare parts</li><li>Perform additional duties and special projects as assigned</li></ul><h4><br></h4><p><strong>Desired Candidate Profile</strong></p><div><h4><b style="font-size: 14px;">REQUIRED:</b></h4><p style="font-size: 11px;">Minimum Acceptable Experience Level:</p><ul style="font-size: 11px;"><li style="font-size: 11px;">Ten (10) years of HVAC/R experience, including at least two (4) years in a supervisory or lead role; or</li><li style="font-size: 11px;">Equivalent combination of technical training, certifications, and hands-on HVAC/R experience</li></ul><p style="font-size: 11px;">Experience may be demonstrated through field work, vocational training, apprenticeship programs, or industry-recognized certifications.</p><p style="font-size: 11px;">Knowledge, Skills, and Abilities:</p><ul style="font-size: 11px;"><li style="font-size: 11px;">Knowledge of applicable U.S. codes and International Mechanical Code (IMC) standards</li><li style="font-size: 11px;">Strong understanding of HVAC/R systems, operations, and repairs</li><li style="font-size: 11px;">Familiarity with supporting contract operations in an overseas environment</li><li style="font-size: 11px;">Ability to work in a fast-paced environment while managing multiple priorities</li><li style="font-size: 11px;">Cross-cultural awareness and ability to work within a diverse workforce</li><li style="font-size: 11px;">Strong organizational and time management skills</li><li style="font-size: 11px;">Proficiency in Microsoft Word and Excel</li><li style="font-size: 11px;">Ability to work effectively as part of a team</li><li style="font-size: 11px;">Strong communication skills, both verbal and written</li></ul><p style="font-size: 11px;">Education:</p><ul style="font-size: 11px;"><li style="font-size: 11px;">High school diploma or GED required</li><li style="font-size: 11px;">HVAC vocational training, apprenticeship completion, or equivalent experience</li></ul><p style="font-size: 11px;">Passport, Licenses and Certifications:</p><ul style="font-size: 11px;"><li style="font-size: 11px;">As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li style="font-size: 11px;">Valid drivers license from Home of Record</li><li style="font-size: 11px;">EPA Section 608 Certification required</li><li style="font-size: 11px;">HVAC licensing or certification is preferred; however, candidates without a formal license may qualify based on experience and demonstrated technical expertise</li><li style="font-size: 11px;">Candidates must be able to obtain any required certifications or credentials within 180 days of employment, if applicable</li></ul><p style="font-size: 11px;">Security Vetting:</p><ul style="font-size: 11px;"><li style="font-size: 11px;">Must be able to obtain and maintain a Secret US Government Clearance.</li><li style="font-size: 11px;">Note: US Citizenship is required to obtain a Secret Clearance.</li></ul><p style="font-size: 11px;">Language Skills:</p><ul style="font-size: 11px;"><li style="font-size: 11px;">Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li></ul><p style="font-size: 11px;">Medical:</p><ul style="font-size: 11px;"><li style="font-size: 11px;">Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</li></ul><h4><b style="font-size: 14px;">DESIRED:</b></h4><ul style="font-size: 11px;"><li style="font-size: 11px;">Previous overseas experience</li><li style="font-size: 11px;">Experience working in austere or harsh environments</li><li style="font-size: 11px;">Prior experience with Amentum or similar contracts</li></ul><h4><br></h4></div>

<p><b>Role &amp; Responsibilities:</b></p><p> Responsible for the safe erection of structural steel and related materials. Follows highest level of safety standards. Ensure that quality standards are maintained. Discuss issues with the supervisor. Perform any other duties as required within own field of competence  Must be familiar with all erection tools.  Assemble columns, beams and girders according to blueprint and supervisor’s instruction.  Unload and stack steel girders, bars and column.  Attached cables or sling to each piece and help guide them with ropes into place.  Checks horizontal and vertical alignment using levels, plumb bob or transits.  Fasten frameworks using nuts and bolts.  Repair and install metal structures using welding, riveting and other techniques.  Actively participate in the project specific training programs, and other programs which support achievement of project goals. • Candidates shall be aged between 30 – 45 • Candidates shall have minimum 3 years GCC experience • Candidates shall have minimum 5 years of overseas experience. • Candidates shall have experience in large scale projects. • Candidates shall be worked and have minimum 5 years’ experience • Candidates shall be accustomed to work in the hot weather conditions. • Candidates shall obey the HSE regulations at site. • Candidates should have worked under high quality standards. • Candidate shall have no objection for night shift working. Night shift work will be rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p>A prestigious 5-star hotel in Iraq is seeking a professional and experienced Front Desk Supervisor to lead the front office team and ensure exceptional guest service. The successful candidate will oversee daily front desk operations, support the reception team, and maintain the highest hospitality standards.</p><h4><b><br></b></h4><h4><b>Key Responsibilities</b></h4><ul><li>Supervise the daily operations of the front desk.</li><li>Ensure a smooth and efficient check-in and check-out process.</li><li>Handle guest inquiries, requests, and complaints professionally.</li><li>Train, guide, and support front office staff.</li><li>Prepare staff schedules and monitor attendance.</li><li>Coordinate with other hotel departments to ensure excellent guest experiences.</li><li>Ensure compliance with hotel policies and service standards.</li></ul><h4><b><br></b></h4><h4><b>Requirements</b></h4><ul><li>Previous experience in the front office department, preferably in a supervisory role within the hospitality industry.</li><li>Hands-on experience using Opera PMS is required.</li><li>Excellent communication and customer service skills.</li><li>Strong leadership and problem-solving abilities.</li><li>Proficiency in Microsoft Office.</li><li>Ability to work flexible shifts, including weekends and holidays.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Previous experience in the front office department, preferably in a supervisory role within the hospitality industry.</li><li>Hands-on experience using Opera PMS is required.</li><li>Excellent communication and customer service skills.</li><li>Strong leadership and problem-solving abilities.</li><li>Proficiency in Microsoft Office.</li><li>Ability to work flexible shifts, including weekends and holidays.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Vehicle Flagman </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>controlling vehicle and pedestrian movement</strong> around work areas, access routes, and site activities. Ensure clear communication, safe traffic flow, and protection of personnel, vehicles, and equipment in accordance with site traffic-management requirements.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Control <strong>vehicle and pedestrian movement</strong> around work zones, access roads, and work fronts.</li><li>Provide clear <strong>hand signals, visual signals, and radio communication</strong> to vehicle operators.</li><li>Guide vehicles during <strong>reversing, maneuvering, loading/unloading, and restricted-area access</strong>.</li><li>Establish and maintain <strong>safe exclusion zones, barriers, and controlled access points</strong>.</li><li>Monitor traffic conditions and prevent <strong>unauthorized access or unsafe vehicle movement</strong>.</li><li>Coordinate with <strong>drivers, equipment operators, lifting teams, supervisors, and work crews</strong>.</li><li>Ensure adequate <strong>visibility, positioning, lighting, and communication</strong> while performing flagging duties.</li><li>Stop vehicle movement immediately when <strong>unsafe conditions, personnel hazards, or obstructions</strong> are identified.</li><li>Support safe access during <strong>construction, maintenance, lifting, instrumentation, and ICSS activities</strong>.</li><li>Report <strong>traffic hazards, near misses, damaged barriers, and unsafe conditions</strong> to the supervisor.</li><li>Maintain required <strong>traffic-control equipment, signs, barriers, and communication devices</strong>.</li><li>Comply with <strong>site traffic plans, PTW, HSE requirements, PPE, and Company safety procedures</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Advanced</strong> <strong>Welder </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for performing <strong>approved general and support welding activities</strong> within assigned competency and certification limits. Ensure work is executed in accordance with approved <strong>WPS, drawings, quality requirements, traceability, and HSE procedures</strong>.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform <strong>general and support welding activities</strong> within approved qualification and competency limits.</li><li>Follow approved <strong>WPS, drawings, welding procedures, and project specifications</strong>.</li><li>Prepare, fit-up, align, and weld assigned <strong>supports, brackets, piping components, structures, and miscellaneous items</strong>.</li><li>Verify <strong>joint preparation, fit-up, welding parameters, and consumable requirements</strong> before and during welding.</li><li>Maintain proper <strong>electrode/filler material control and traceability</strong>.</li><li>Conduct visual checks and identify <strong>weld defects, damage, or unacceptable conditions</strong>.</li><li>Support <strong>inspection, NDT, weld repair, and corrective activities</strong> under authorized supervision.</li><li>Maintain <strong>weld identification, traceability, and required inspection records</strong>.</li><li>Maintain welding equipment, leads, earth connections, and work areas in <strong>safe working condition</strong>.</li><li>Coordinate with <strong>Welding Inspector, QA/QC, Piping, Mechanical, Instrumentation, Construction, and HSE</strong> teams.</li><li>Report <strong>deviations, defective materials, unsafe conditions, and welding issues</strong> to the responsible supervisor.</li><li>Maintain proper <strong>hot-work controls, housekeeping, fire prevention, and work-area protection</strong>.</li><li>Comply with <strong>PTW, HSE, quality, welding, and Company requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Finance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Receiving Supervisor you are responsible to handle purchase orders and ensure that items, arriving without authorization, are not received and your role will include key responsibilities such as:<br><br>• Oversee the handling of purchase orders to ensure that copies of all approved and currently valid purchase orders e.g. purchase requests, market list and standard supply contracts are at hand and files are maintained accordingly<br>• Coordinate and ensure that all items are physically received, inspected and weighed as necessary and in case of technical items, equipment, furniture and certain food items, the concerned department is consulted to confirm the quality, specifications and materials are inspected, as well as measurements are made thoroughly<br>• Coordinate and transfer items after inspection to the department concerned either through the help of the supplier or concerned department by collecting from the receiving bay<br>• Ensure that suppliers’ invoices are acknowledged by adding the receiving stamp on the original and the suppliers’ copy, once checking is completed<br>• Ensure that the invoice is dated and reference number of the authorization is quoted.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Role: <strong>Mechanical Construction Supervisor</strong><br> <br> Education / Qualification -&nbsp;Degree/Diploma in mechanical Engineering or any other related field<br> <br> Work Experience:&nbsp;<br><ul><li><strong>Minimum 15 years of experience required.</strong></li><li><strong>Similar position - 10 Years experience is mandatory</strong></li><li><strong>Supervise site construction activities</strong>, meeting quality and safety requirements.</li><li>Management and follow-up on a daily basis of the Mechanical (Static &amp; Rotating, HVAC included) construction work scope as per project specifications and schedule in coordination with the Construction Lead area and Mechanical Construction Superintendent.</li><li>Participate to the elaboration of 5 Weeks Look ahead Planning and liaise with Site Superintendent</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>Supervise and coordinate daily linen operations, including receiving, sorting, washing, pressing, and distribution Manage linen inventory levels, track stock movements, and conduct regular audits to ensure accuracy Inspect linens for quality, damage, and cleanliness standards; implement corrective actions as needed Train, schedule, and supervise linen staff members; provide performance feedback and coaching Develop and maintain efficient workflows and processes to optimize productivity and minimize waste Coordinate with other departments to ensure timely delivery of clean linens and address service requests Monitor equipment maintenance and report any operational issues or repairs needed Maintain detailed records of inventory, staff schedules, and operational metrics Ensure compliance with health, safety, and hygiene standards applicable to linen handling Identify opportunities for process improvements and cost optimization</p><p><strong>Desired Candidate Profile</strong></p><p>Proven experience as a Linen Supervisor or in a similar supervisory role within hospitality, healthcare, or laundry operations Strong knowledge of linen management, fabric care standards, and laundry operations Demonstrated ability to supervise and motivate team members effectively Proficiency in inventory management and tracking systems Excellent organizational and time management skills Strong attention to detail and quality control mindset Ability to analyze problems and implement practical solutions Clear communication and interpersonal skills Experience working in fast-paced, high-volume environments Familiarity with health and safety regulations related to linen handling</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic guest focused Housekeeping professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Housekeeping Supervisor you are responsible to supervise the team of Housekeeping Attendants towards achieving the operational objectives while ensuring that the standards of cleanliness and maintenance of the hotel meet the requirements specified and your role will include key responsibilities such as:<br><br>• Prepare Housekeeping Attendants job assignments<br>• Issue keys and supplies to Housekeeping Attendants <br>• Take note of VIPs, Do Not Disturb, Sleep Out, Double-Lock Rooms and take appropriate action<br>• Attend daily meetings and receive special instructions<br>• Receive check-outs before reporting them as vacant<br>• Receive special requests from guests and carry them out<br>• Inspect areas cleaned using checklist to see that cleaning is adequate, supplies in room are as per standard and immediate repairs are reported<br>• Fill out report and hand over found articles to the lost and found department<br>• Supervise cleaning of guest rooms, corridors and stairwells<br>• Train and assist Housekeeping Attendants and advise Superior about performance<br>• Assist with inventory and ensure that all housekeeping machines and equipment are properly handled and maintained</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic guest focused Housekeeping professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Housekeeping Attendant you are responsible for daily assigned duties as instructed by Supervisors while adhering to hotel policies and procedures and your role will include key responsibilities such as:<br><br>• Receive work assignment, keys and supplies from the supervisor and sign the key log book accurately<br>• Clean rooms and bathrooms, performing any combination of the following duties<br>• Keep fire exits and stair ways clear of any obstruction<br>• Check and report any maintenance work required immediately<br>• Pick up any litter from corridors and pathways<br>• Vacuum carpet and upholstered furniture, dust and wipe furniture, empty ashtrays and wastebaskets<br>• Make bed, wash sink, bathtub, toilet, tiles, mirrors and floor and polish brass and metal<br>• Replenish bathroom supplies and room supplies<br>• Tidy and arrange neatly guest toilet articles on vanity top and spot cleans carpet when necessary<br>• Clean and keep the guest corridors, service pantries and service areas neat and tidy at all times<br>• Remove Room Service tray and trolley from guestroom and corridors<br>• Inform valet service to collect guests clothes for laundry, dry cleaning or pressing services</p> </div>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <p>KBR is looking for a site mechanical supervisor to be based in Basra, Iraq – daily commute.</p> <h4>Main missions</h4> <ul> <li>Ensure safe, compliant, and high-quality execution of all mechanical construction, installation, testing, and pre-commissioning activities at site.</li> <li>Supervise EPC contractor and subcontractor mechanical works in accordance with approved drawings, project specifications, method statements, ITPs, applicable codes, vendor requirements, and company requirements.</li> <li>Coordinate mechanical activities with construction, engineering, QA/QC, HSE, commissioning, package vendors, and other disciplines to meet project schedule and system priorities.</li> <li>Identify technical, quality, safety, interface, and constructability issues, and drive their timely resolution and close-out.</li> <li>Support mechanical completion, preservation, pre-commissioning, commissioning, and handover of mechanical systems and equipment.</li> </ul> <h4>Key activities</h4> <strong>Site supervision and construction control</strong> <ul> <li>Supervise daily installation of rotating equipment, static equipment, packaged units, tanks, vessels, piping, pipeline, pumps, compressors, turbines, filters, heat exchangers, chemical dosing equipment, lifting equipment, and associated auxiliaries.</li> <li>Monitor equipment receipt, storage, preservation, handling, lifting, positioning, levelling, alignment, grouting, bolting, coupling, lubrication, and final installation.</li> <li>Verify equipment location, orientation, elevations, access, maintainability, foundations, anchor bolts, supports, and interfaces against approved AFC drawings and vendor documentation.</li> <li>Supervise associated piping interfaces, including nozzle connections, strain control, flange alignment, supports, valves, temporary strainers, cleanliness, and reinstatement.</li> <li>Ensure work fronts are properly planned and required drawings, materials, tools, lifting plans, access, permits, vendor support, and preceding works are available.</li> <li>Monitor preservation and protection of installed equipment until handover, including periodic rotation, desiccants, lubrication, weather protection, and preservation records as applicable.</li> </ul> <strong>Technical compliance and quality</strong> <ul> <li>Ensure execution complies with approved AFC drawings, specifications, equipment data sheets, vendor manuals, method statements, ITPs, and applicable international standards.</li> <li>Participate in inspection requests and witness required hold and witness points with QA/QC personnel and vendor representatives.</li> <li>Inspect equipment installation, alignment, levelling, soft-foot, grouting, bolting, lubrication, cleanliness, guards, supports, and general workmanship.</li> <li>Witness or review mechanical tests and checks, including hydrostatic and pneumatic tests where applicable, flushing, blowing, cleaning, leak tests, shaft alignment, rotation checks, vibration baseline checks, and functional testing.</li> <li>Review and follow up punch items, site observations, non-conformities, concessions, and corrective actions until closure.</li> <li>Assist in checking red-line mark-ups, inspection reports, test packs, preservation records, equipment dossiers, and as-built documentation.</li> </ul> <strong>Contractor supervision and progress</strong> <ul> <li>Monitor contractor and subcontractor manpower, supervision, productivity, work quality, and compliance with the approved construction schedule.</li> <li>Review short-term work plans and report constraints, delays, interface issues, and recovery requirements to the mechanical superintendent or construction manager.</li> <li>Attend daily coordination meetings, site walkthroughs, progress reviews, toolbox talks, and technical meetings as required.</li> <li>Prepare clear daily and weekly reports covering progress, manpower, inspections, constraints, quality issues, HSE observations, and planned activities.</li> <li>Ensure personnel assigned to specialized mechanical activities are competent and appropriately qualified.</li> </ul> <strong>Interfaces, completion and commissioning</strong> <ul> <li>Coordinate mechanical interfaces with civil, structural, piping, electrical, instrumentation, telecom, HVAC, process, package vendors, and commissioning teams.</li> <li>Ensure foundations, embedded items, access routes, lifting provisions, maintenance clearances, utilities, piping connections, and electrical and instrumentation interfaces are ready.</li> <li>Support systemization, mechanical completion checks, punch-listing, turnover dossier preparation, and handover by system or subsystem.</li> <li>Participate in readiness reviews before equipment start-up and ensure outstanding construction, quality, preservation, and safety items are controlled.</li> <li>Support pre-commissioning and commissioning activities, including vendor attendance, flushing, lubrication, solo runs, functional tests, performance checks, and troubleshooting.</li> </ul> <h4>HSE responsibility</h4> <ul> <li>Ensure mechanical works comply with project HSE requirements, approved risk assessments, method statements, permit-to-work procedures, and isolation requirements.</li> <li>Pay particular attention to lifting and rigging, stored energy, pressure testing, rotating equipment, hot work, work at height, confined spaces, line breaking, and simultaneous operations.</li> <li>Intervene and stop unsafe work when necessary, report unsafe acts and conditions, and verify implementation of corrective measures.</li> <li>Participate in toolbox talks, safety walks, audits, incident investigations, and lessons-learned activities.</li> <li>Promote strong safety culture and good housekeeping in equipment areas, workshops, laydown areas, and mechanical work fronts.</li> </ul> <h4>Professional experience</h4> <ul> <li>More than 10 years of relevant experience in mechanical construction and site supervision on large EPC/EPSCC projects in oil and gas, power generation, water treatment, utilities, or major industrial facilities.</li> <li>Significant field experience supervising installation, alignment, testing, preservation, pre-commissioning, and handover of mechanical equipment and packages.</li> </ul> <h4>Experience in similar position</h4> <ul> <li>Previous experience as site mechanical supervisor, mechanical construction supervisor, or equivalent position on a major project.</li> <li>Hands-on experience with rotating equipment, static equipment, piping, pipeline, packaged units, pumps, compressors, turbines, vessels, heat exchangers, tanks, lifting equipment, and associated auxiliaries.</li> <li>Experience in large pumping stations, power generation facilities, water treatment plants, or major utility systems is preferred.</li> <li>Experience on Middle East projects and/or remote construction sites is an advantage.</li> </ul> <h4>Technical skills</h4> <ul> <li>Strong knowledge of mechanical construction methods, equipment installation, alignment, grouting, preservation, inspection, testing, pre-commissioning, and completion processes.</li> <li>Ability to read and interpret equipment layouts, general arrangement drawings, foundation drawings, mechanical data sheets, P&IDs, piping isometrics, vendor drawings, installation manuals, and AFC documentation.</li> <li>Good understanding of mechanical interfaces with civil, structural, piping, electrical, instrumentation, HVAC, process, and package systems.</li> <li>Familiarity with ITP, RFI, NCR, punch-list, mechanical completion, turnover, preservation, and quality-record processes.</li> <li>Working knowledge of applicable API, ASME, ISO, ASTM, NFPA, and project-specific standards and requirements.</li> <li>Competence in reporting, progress monitoring, work-front planning, and standard office applications.</li> </ul> <h4>Level / diploma</h4> <ul> <li>Bachelor’s degree in mechanical engineering preferred.</li> <li>A recognized technical diploma in mechanical engineering may be accepted with substantial relevant site experience.</li> <li>Relevant training in rotating equipment, alignment, lifting supervision, pressure testing, commissioning, or construction supervision is an advantage.</li> </ul> <h4>Languages</h4> <p>Proficiency in English is mandatory. Knowledge of Arabic is an advantage.</p> <h4>Soft skills</h4> <ul> <li>Strong field presence, leadership, and contractor-management capability.</li> <li>Clear communication and coordination skills in a multicultural environment.</li> <li>Proactive, practical, safety-conscious, and quality-focused approach.</li> <li>Ability to prioritize work, resolve site issues, manage interfaces, and work under schedule pressure.</li> <li>Ability to challenge non-compliant work and intervene firmly when safety or quality is at risk.</li> </ul> <p>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Site Mechanical Supervisors<br><br><br><br><p><i><b>"Belong, Connect, Grow, with KBR!</b></i></p><br><br><br><p><i><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></i></p><br><br><br><p><i><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></i></p><br><br><br><p>KBR is looking for a&nbsp;<b>Site Mechanical Supervisor </b>to be based in <b>Basra, Iraq – Daily Commute</b></p><br><br><br><p><b><u>MAIN MISSIONS</u></b></p><br><br><ul><li>Ensure safe, compliant, and high-quality execution of all mechanical construction, installation, testing, and pre-commissioning activities at site.</li></ul><ul><li>Supervise EPC Contractor and subcontractor mechanical works in accordance with approved drawings, project specifications, method statements, ITPs, applicable codes, vendor requirements, and COMPANY requirements.</li></ul><ul><li>Coordinate mechanical activities with construction, engineering, QA/QC, HSE, commissioning, package vendors, and other disciplines to meet project schedule and system priorities.</li></ul><ul><li>Identify technical, quality, safety, interface, and constructability issues, and drive their timely resolution and close-out.</li></ul><ul><li>Support mechanical completion, preservation, pre-commissioning, commissioning, and handover of mechanical systems and equipment.</li></ul><br><p><b><u>KEY ACTIVITIES</u></b></p><br><br><p><b>Site Supervision and Construction Control</b></p><br><br><ul><li>Supervise daily installation of rotating equipment, static equipment, packaged units, tanks, vessels, piping, pipeline, pumps, compressors, turbines, filters, heat exchangers, chemical dosing equipment, lifting equipment, and associated auxiliaries.</li></ul><ul><li>Monitor equipment receipt, storage, preservation, handling, lifting, positioning, levelling, alignment, grouting, bolting, coupling, lubrication, and final installation.</li></ul><ul><li>Verify equipment location, orientation, elevations, access, maintainability, foundations, anchor bolts, supports, and interfaces against approved AFC drawings and vendor documentation.</li></ul><ul><li>Supervise associated piping interfaces, including nozzle connections, strain control, flange alignment, supports, valves, temporary strainers, cleanliness, and reinstatement.</li></ul><ul><li>Ensure work fronts are properly planned and required drawings, materials, tools, lifting plans, access, permits, vendor support, and preceding works are available.</li></ul><ul><li>Monitor preservation and protection of installed equipment until handover, including periodic rotation, desiccants, lubrication, weather protection, and preservation records as applicable.</li></ul><br><p><b>Technical Compliance and Quality</b></p><br><br><ul><li>Ensure execution complies with approved AFC drawings, specifications, equipment data sheets, vendor manuals, method statements, ITPs, and applicable international standards.</li></ul><ul><li>Participate in inspection requests and witness required hold and witness points with QA/QC personnel and vendor representatives.</li></ul><ul><li>Inspect equipment installation, alignment, levelling, soft-foot, grouting, bolting, lubrication, cleanliness, guards, supports, and general workmanship.</li></ul><ul><li>Witness or review mechanical tests and checks, including hydrostatic and pneumatic tests where applicable, flushing, blowing, cleaning, leak tests, shaft alignment, rotation checks, vibration baseline checks, and functional testing.</li></ul><ul><li>Review and follow up punch items, site observations, non-conformities, concessions, and corrective actions until closure.</li></ul><ul><li>Assist in checking red-line mark-ups, inspection reports, test packs, preservation records, equipment dossiers, and as-built documentation.</li></ul><br><p><b>Contractor Supervision and Progress</b></p><br><br><ul><li>Monitor contractor and subcontractor manpower, supervision, productivity, work quality, and compliance with the approved construction schedule.</li></ul><ul><li>Review short-term work plans and report constraints, delays, interface issues, and recovery requirements to the Mechanical Superintendent or Construction Manager.</li></ul><ul><li>Attend daily coordination meetings, site walkthroughs, progress reviews, toolbox talks, and technical meetings as required.</li></ul><ul><li>Prepare clear daily and weekly reports covering progress, manpower, inspections, constraints, quality issues, HSE observations, and planned activities.</li></ul><ul><li>Ensure personnel assigned to specialized mechanical activities are competent and appropriately qualified.</li></ul><br><p><b>Interfaces, Completion and Commissioning</b></p><br><br><ul><li>Coordinate mechanical interfaces with civil, structural, piping, electrical, instrumentation, telecom, HVAC, process, package vendors, and commissioning teams.</li></ul><ul><li>Ensure foundations, embedded items, access routes, lifting provisions, maintenance clearances, utilities, piping connections, and electrical and instrumentation interfaces are ready.</li></ul><ul><li>Support systemization, mechanical completion checks, punch-listing, turnover dossier preparation, and handover by system or subsystem.</li></ul><ul><li>Participate in readiness reviews before equipment start-up and ensure outstanding construction, quality, preservation, and safety items are controlled.</li></ul><ul><li>Support pre-commissioning and commissioning activities, including vendor attendance, flushing, lubrication, solo runs, functional tests, performance checks, and troubleshooting.</li></ul><br><p><b><u>HSE RESPONSIBILITY</u></b></p><br><br><ul><li>Ensure mechanical works comply with project HSE requirements, approved risk assessments, method statements, permit-to-work procedures, and isolation requirements.</li></ul><ul><li>Pay particular attention to lifting and rigging, stored energy, pressure testing, rotating equipment, hot work, work at height, confined spaces, line breaking, and simultaneous operations.</li></ul><ul><li>Intervene and stop unsafe work when necessary, report unsafe acts and conditions, and verify implementation of corrective measures.</li></ul><ul><li>Participate in toolbox talks, safety walks, audits, incident investigations, and lessons-learned activities.</li></ul><ul><li>Promote strong safety culture and good housekeeping in equipment areas, workshops, laydown areas, and mechanical work fronts.</li></ul><br><p><b>Professional Experience</b></p><br><br><ul><li>More than 10 years of relevant experience in mechanical construction and site supervision on large EPC/EPSCC projects in oil and gas, power generation, water treatment, utilities, or major industrial facilities.</li></ul><ul><li>Significant field experience supervising installation, alignment, testing, preservation, pre-commissioning, and handover of mechanical equipment and packages.</li></ul><br><p><b>Experience in Similar Position</b></p><br><br><ul><li>Previous experience as Site Mechanical Supervisor, Mechanical Construction Supervisor, or equivalent position on a major project.</li></ul><ul><li>Hands-on experience with rotating equipment, static equipment, piping, pipeline, packaged units, pumps, compressors, turbines, vessels, heat exchangers, tanks, lifting equipment, and associated auxiliaries.</li></ul><ul><li>Experience in large pumping stations, power generation facilities, water treatment plants, or major utility systems is preferred.</li></ul><ul><li>Experience on Middle East projects and/or remote construction sites is an advantage.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Strong knowledge of mechanical construction methods, equipment installation, alignment, grouting, preservation, inspection, testing, pre-commissioning, and completion processes.</li></ul><ul><li>Ability to read and interpret equipment layouts, general arrangement drawings, foundation drawings, mechanical data sheets, P&amp;IDs, piping isometrics, vendor drawings, installation manuals, and AFC documentation.</li></ul><ul><li>Good understanding of mechanical interfaces with civil, structural, piping, electrical, instrumentation, HVAC, process, and package systems.</li></ul><ul><li>Familiarity with ITP, RFI, NCR, punch-list, mechanical completion, turnover, preservation, and quality-record processes.</li></ul><ul><li>Working knowledge of applicable API, ASME, ISO, ASTM, NFPA, and project-specific standards and requirements.</li></ul><ul><li>Competence in reporting, progress monitoring, work-front planning, and standard office applications.</li></ul><br><p><b>Level / Diploma</b></p><br><br><ul><li>Bachelor’s Degree in Mechanical Engineering preferred.</li></ul><ul><li>A recognized technical diploma in Mechanical Engineering may be accepted with substantial relevant site experience.</li></ul><ul><li>Relevant training in rotating equipment, alignment, lifting supervision, pressure testing, commissioning, or construction supervision is an advantage.</li></ul><br><p><b>Languages</b></p><br><br><ul><li>Proficiency in English is mandatory. Knowledge of Arabic is an advantage.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li>Strong field presence, leadership, and contractor-management capability.</li></ul><ul><li>Clear communication and coordination skills in a multicultural environment.</li></ul><ul><li>Proactive, practical, safety-conscious, and quality-focused approach.</li></ul><ul><li>Ability to prioritize work, resolve site issues, manage interfaces, and work under schedule pressure.</li></ul><ul><li>Ability to challenge non-compliant work and intervene firmly when safety or quality is at risk.</li></ul><br><p><span>Interested and suitable candidates please apply for the role. Suitable candidates will be contacted directly.</span></p><br><br><br><br><br> </div>

<p><h4>Instrument supervisor</h4> <p>Responsible for design, specification and services related to control systems including basic process control systems, safety systems, control panels, analyzer systems, telecommunications, field instrumentation, and valves etc. May also be responsible for advanced controls optimization.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria.</p> <p>Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 4 years related experience, with average experience ranging from 6-10 years. Requires sufficient professional experience to assure competence as a fully trained professional. Work requires a broad knowledge of precedents.</p> <p>Also may be responsible for leadership of a functional area on a small project or a segment of a larger project. As the lead, plans, budgets, organizes, coordinates and controls the project and is responsible for employee performance appraisals and for coaching and developing lower level professionals.</p> <p>Certification as a licensed/chartered professional engineer is preferred.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Instrument Supervisor<br><br><p>Responsible for design, specification and services related to control systems including basic process control systems, safety systems, control panels, analyzer systems, telecommunications, field instrumentation, and valves etc. May also be responsible for advanced controls optimization. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 4 years related experience, with average experience ranging from 6-10 years. Requires sufficient professional experience to assure competence as a fully trained professional. Work requires a broad knowledge of precedents. Also may be responsible for leadership of a functional area on a small project or a segment of a larger project. As the lead, plans, budgets, organizes, coordinates and controls the project and is responsible for employee performance appraisals and for coaching and developing lower level professionals. Certification as a Licensed/Chartered Professional Engineer is preferred.</p><br><br><br><br><br> </div>

<p> <strong>Job title</strong>: HSE Supervisor<br> <strong>Location</strong>: Basra, Iraq<br> <strong>Job reference #</strong>: 34113<br> <strong>Contract type</strong>: Permanent<br> <strong>Language requirements</strong>: Fluent in English and Arabic; knowledge of Italian is a plus.</p> <p>At <strong>Eni</strong>, we are looking for an <strong>HSE Supervisor</strong> to join <strong>Eni Iraq B.V.</strong> in <strong>Basra</strong>, Iraq.</p> <p>You will be responsible for ensuring the effective implementation of the Project Health, Safety and Environment (HSE) Management System at site level. Working closely with site management, you will play a key role in promoting a strong safety culture, overseeing daily HSE activities and ensuring compliance with company, client and local regulatory requirements.</p> <p>This is a field-based position requiring a strong on-site presence, proactive safety leadership and the ability to influence safe working behaviours across a multicultural workforce.</p> <p> <strong>Main responsibilities:</strong> </p> <ul> <li>Supervise and coordinate the implementation of HSE plans, procedures and operational performance initiatives across all site activities.</li> <li>Conduct daily site inspections, identify and report unsafe acts and conditions, and ensure appropriate corrective actions are implemented and followed up.</li> <li>Participate in Job Safety Analysis (JSA) and Permit to Work (PTW) reviews before work commences.</li> <li>Monitor compliance with company and client HSE requirements, ensuring appropriate use of PPE and maintaining high housekeeping standards.</li> <li>Lead toolbox talks and safety briefings to promote HSE awareness among employees, contractors and subcontractors.</li> <li>Support investigations into incidents, near misses and unsafe conditions, preparing reports and recommending appropriate preventive measures.</li> <li>Verify the effective implementation of emergency response procedures and drills, taking a leading role in on-site emergency exercises.</li> <li>Coordinate with subcontractors HSE representatives to ensure alignment with site safety requirements and standards.</li> <li>Maintain accurate HSE records, including training records, site inspection reports and HSE performance indicators.</li> <li>Support the implementation of environmental controls, including waste segregation, spill prevention and emissions control.</li> <li>Promote continuous improvement and positive HSE behaviours throughout project execution.</li> <li>Encourage and support the use of HSE digital tools to improve site monitoring and reporting.</li> <li>Prepare meeting minutes and HSE reports as required.</li> <li>Promote and communicate the company s HSE culture effectively to local employees, contractors and subcontractors.</li> </ul> <p> <strong>Skills and experience required:</strong> </p> <ul> <li>Experience working on oil and gas projects.</li> <li>Strong experience in technical safety and HSE management roles.</li> <li>Bachelor s degree in Engineering, Environmental Science or a related discipline preferred.</li> <li>Fluency in written and spoken English.</li> <li>Good knowledge of international HSE standards, including OSHA, ISO 45001 and ISO 14001.</li> <li>Experience working in multicultural environments and challenging climatic conditions.</li> <li>Strong communication and interpersonal skills, with the ability to influence and promote safe working behaviours.<br>Proactive and assertive approach, with the ability to take ownership of site HSE activities.</li> <li>Strong reporting and documentation skills, including proficiency in Microsoft Office and HSE databases.</li> <li>Collaborative approach, with a commitment to supporting and mentoring junior colleagues.</li> </ul> <p> <strong>How to apply:</strong> </p> <ul> <li>Applications are only accepted through our online application system.</li> <li>Please upload your CV in <strong>English</strong>.</li> </ul> <p><br></p><p><strong>Desired Candidate Profile</strong></p><p>About Eni Iraq B.V. <br> <br>Eni Iraq B.V. is a leading energy company at the forefront of the exploration, development, and production of hydrocarbons in Iraq. Since 2009, we have been actively involved in the development of the Zubair oil and gas field in the Basra region, which is one of the most significant assets in Eni's global portfolio. This field plays a crucial role in meeting the growing demand for energy and has been a key contributor to both the local economy and the broader energy sector in Iraq. Our commitment to sustainable development extends far beyond energy production. At Eni Iraq, we prioritize creating a positive, lasting impact in the communities where we operate. We invest in local education programs, improve healthcare access, and lead environmental sustainability initiatives to support the long-term development of the Basra region and Iraq as a whole. By joining us, you will be part of a dynamic team that is shaping the future of energy, contributing to innovative solutions, and playing an active role in Iraq's energy sector. Eni Iraq offers you the opportunity to be part of an organization that balances cutting-edge energy development with a strong focus on the well-being of local communities and the environment. Join us and make a real difference, be part of a team that is driving progress, sustainability, and positive change in Iraq and the energy industry worldwide.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Role Purpose <br> <p><span>Zain Iraq is actively recruiting to hire Fraud Management Professional who is responsible in detecting, investigating, preventing and resolution of fraud, which is applicable to all aspects of Zain Iraq business, The primary responsibility of a fraud analyst is to determine any potential fraud action or leery activity that may be carried out in Zain organization </span></p><br> <br> <br><br> Responsibilities <br> <ul><li><p><span>Analyze alarms generated by the Fraud Management system.</span></p><br></li><li><p><span>Notify relevant role-players of any potential fraud, where appropriate.</span></p><br></li><li><p><span>Investigate all fraud reported by staff and external parties.</span></p><br></li><li><p><span>Identify root causes of fraud and take prescribed and pre-detailed action to ensure resolution and future detection.</span></p><br></li><li><p><span>Ensure that the results of all investigations are captured and reported accurately.</span></p><br></li><li><p><span>Do ad-hoc data analysis to detect fraud.</span></p><br></li><li><p><span>Provide Input into new or existing Business requirements.</span></p><br></li><li><p><span>He does the work of keeping himself updated on the information related to telecommunication fraud trends.</span></p><br></li><li><p><span>Maximize the utilization of the Fraud Management.</span></p><br></li><li><p><span>Adherence to the fraud Management Strategy.</span></p><br></li><li><p><span>The fraud analyst will be expected to play an active role in information security.</span></p><br></li><li><p><span>Make sure that Zain organization is free from any kind of fraud incidents or occurrences that will harm the reputation and established business of the Company.</span></p><br></li><li><p><span>He is required to follow the guiding principles and policies previously set up by the Zain company.</span></p><br></li><li><p><span>Accurately document all actions taken on a case.</span></p><br></li><li><p><span>Report risk information and findings to the immediate supervisor in a timely manner.</span></p><br></li><li><p><span>Contribute to the creation of fraud rules by providing analytical data to support decisions.</span></p><br></li></ul><ul><li><p><span>Actively participate in team meetings; share information and make suggestions for improvements to fraud operations.</span></p><br></li></ul><ul><li><p><span>Conduct a quarterly assessment of all tasks within his area of responsibility, as outlined in the shared task list, to ensure full compliance with established policies, procedures, and process standards’</span></p><br></li></ul> <br> <br><br> Education, Experience and Competencies <br> <p><strong><span>Education</span></strong></p><br><ul><li><p><span>Bachelor’s degree or above</span></p><br></li></ul><p><strong><span>Experience</span></strong></p><br><ul><li><p><span>Up to 2 years of experience in related field</span></p><br></li><li><p><span>SQL query language and working with relational databases.</span></p><br></li></ul><p><strong><span>Competencies</span></strong></p><br><p><strong><span>Behavioral</span></strong></p><br><ul><li><p><span>Integrity</span></p><br></li><li><p><span>Team Work</span></p><br></li><li><p><span>Information Seeking</span></p><br></li><li><p><span>Problem Solving and Creativity</span></p><br></li><li><p><span>Relationship&nbsp; Building</span></p><br></li><li><p><span>Initiative</span></p><br></li></ul><p><strong><span>Technical</span></strong></p><br><ul><li><p><span>Financial Management</span></p><br></li><li><p><span>Oral and Written Communication</span></p><br></li><li><p><span>Managing Information</span></p><br></li><li><p><span>Technology Application</span></p><br></li></ul><p><strong><span>IDE Competency</span></strong></p><br><ul><li><p><span>Courage to Engage</span></p><br></li><li><p><span>Addressing Bias</span></p><br></li><li><p><span>Allyship</span></p><br></li></ul> <br> <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is looking for an experienced <strong>Rebar Worker</strong> to join our <strong>Operations &amp; Maintenance (O&amp;M) team</strong>. The successful candidate will be responsible for cutting, bending, assembling, and fixing steel reinforcement for foundations, equipment bases, supports, and other civil structures. Ensure reinforcement is installed in accordance with approved drawings, bar schedules, specified spacing, cover, and quality requirements.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Cut, bend, place, and fix reinforcing steel bars according to approved drawings and bar bending schedules.</li><li>Prepare reinforcement cages and assemblies for foundations, equipment bases, plinths, trenches, and supports.</li><li>Verify bar sizes, quantities, spacing, lap lengths, bends, and positioning against approved drawings.</li><li>Maintain specified concrete cover using approved spacers, chairs, and supports.</li><li>Tie reinforcement securely using approved binding wire and appropriate tools.</li><li>Install reinforcement while maintaining required alignment, dimensions, levels, and clearances.</li><li>Support installation of reinforcement around embedded items, anchor bolts, sleeves, and openings.</li><li>Check reinforcement condition and report damaged, corroded, incorrectly sized, or nonconforming bars.</li><li>Assist with reinforcement inspections and rectify identified defects before concrete placement.</li><li>Coordinate with Civil Supervisors, Concrete Workers, Carpenters, Masons, and other trades.</li><li>Handle, store, and stack reinforcement safely to prevent damage, contamination, and obstruction.</li><li>Maintain reinforcement tools and equipment in safe and serviceable condition.</li><li>Follow approved drawings, method statements, inspection requirements, and supervisor instructions.</li><li>Maintain good housekeeping and keep reinforcement work areas clear of scrap and binding-wire waste.</li><li>Comply with PTW, HSE, PPE, manual-handling, lifting, and Company requirements.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Security Supervisor</strong> to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will supervise&nbsp;<strong>site security personnel and security arrangements</strong>, maintain effective&nbsp;<strong>access control, personnel accountability, patrols, incident response, and security reporting</strong>&nbsp;in accordance with&nbsp;requirements.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Supervise daily activities of <strong>security guards and assigned security personnel</strong>.</li><li>Control and monitor <strong>personnel, vehicle, and visitor access</strong> through designated entry and exit points.</li><li>Maintain accurate <strong>personnel accountability, access records, visitor logs, and security registers</strong>.</li><li>Ensure compliance with <strong>site security procedures, access restrictions, identification, and badge requirements</strong>.</li><li>Conduct and supervise <strong>security patrols, inspections, and surveillance</strong> of site facilities and perimeter areas.</li><li>Monitor security conditions and identify <strong>unauthorized access, suspicious activity, security risks, and breaches</strong>.</li><li>Respond to and manage <strong>security incidents, emergencies, alarms, disturbances, and access violations</strong>.</li><li>Immediately report significant incidents and coordinate response with <strong>Security, HSE, Operations, and emergency services</strong> as required.</li><li>Maintain effective control of <strong>gates, barriers, checkpoints, keys, passes, and security equipment</strong>.</li><li>Support implementation of <strong>emergency, evacuation, muster, and personnel accountability arrangements</strong>.</li><li>Prepare accurate <strong>incident reports, daily security reports, shift handovers, and security records</strong>.</li><li>Brief and supervise security personnel on <strong>site rules, post instructions, emergency procedures, and security requirements</strong>.</li><li>Coordinate security arrangements for <strong>contractor activities, deliveries, visitors, shutdowns, and special events</strong>.</li><li>Identify security deficiencies and recommend <strong>corrective and preventive actions</strong>.</li><li>Comply with the<strong> Security procedures, HSE requirements, site rules, and applicable legal requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a seasoned <strong>Rigger </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for preparing, inspecting, connecting, and controlling loads during lifting operations in accordance with approved lift plans, rigging procedures, and site safety requirements. Ensure safe handling and movement of equipment and materials supporting construction, instrumentation, and ICSS activities.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Execute rigging and lifting activities in accordance with approved lift plans and instructions.</li><li>Select suitable slings, shackles, hooks, lifting accessories, and rigging equipment for the load.</li><li>Inspect rigging equipment for damage, wear, defects, certification, and safe working load (SWL) before use.</li><li>Secure and connect loads using approved rigging methods and lifting points.</li><li>Guide load movement using standard hand signals, radios, and clear communication with crane operators.</li><li>Control loads during lifting, slewing, positioning, and lowering to prevent swinging, collision, or uncontrolled movement.</li><li>Establish and maintain exclusion zones and prevent unauthorized access to lifting areas.</li><li>Verify load stability, balance, clearances, and potential obstructions before and during lifts.</li><li>Support the movement and positioning of instruments, ICSS equipment, panels, cable drums, and other materials.</li><li>Stop lifting activities and report unsafe conditions, equipment defects, or deviations from the approved lift plan.</li><li>Maintain proper storage, handling, and traceability of rigging equipment and accessories.</li><li>Coordinate with the Lifting Supervisor, Lifting Engineer, crane operator, banksman, and work crews.</li><li>Comply with PTW, JSA, lifting procedures, HSE requirements, and site rules.</li></ul> </div>