Tour operator Jobs

<p>A. Welding Engineering & Procedure Control • Develop, review, and qualify WPS/PQRs in accordance with project requirements and code standards. • Manage Welder and Welding Operator Performance Qualification (WPQ) and continuity records. • Prepare Weld Maps, Welding Sequence Plans, and Technical Queries (TQs) for design discrepancies. B. Quality Assurance & NDT Control • Lead and supervise the QA/QC team; review and approve Inspection & Test Plans (ITPs) and NDT procedures (RT, UT, MT, PT). • Perform Root Cause Analysis (RCA) of welding failures and NCRs, and propose technical solutions to improve weld quality and productivity. • Interpret radiographic films (RTFI) and witness NDT activities on-site. C. Cross-Country Pipeline Specific Inspection & Execution (??????) • Perform comprehensive pipeline construction inspections along the Right-of-Way (ROW), strictly following API 1104, ASME B31.4/B31.8, and project specifications. • Conduct pre-weld inspections for pipe bevel preparation, root gap, fit-up tolerances, and alignment prior to the root pass. • Supervise field automatic/semi-automatic pipeline welding (GMAW/FCAW) used for large-diameter cross-country lines. • Monitor and verify pre-heat, inter-pass temperatures, and heat input across the pipeline spread to prevent hydrogen cracking. • Coordinate daily NDT activities along the pipeline (RT/AUT), ensuring timely defect identification and rectification. • Inspect field joint coating, holiday testing, and anti-corrosion systems on the girth welds. • Coordinate tie-in welding, lowering, and backfilling activities to maintain continuous construction quality. • Witness Hydrostatic Testing, pigging, and drying procedures for pipeline sections and final mechanical completion. • Maintain comprehensive pipeline weld records, NDT tracking logs, and repair registers for project audit and handover to the Client. D. Field Execution, HSE & Coordination • Provide daily technical support for on-site construction, resolving bottlenecks related to pipelines, piping, and structural work. • Liaise with clients, TPI, and subcontractors, and participate in weekly progress and quality meetings. • Ensure strict compliance with HSE policies (HAZOP, JSA) and issue Lessons Learned and quality feedback notices to the project teams.</p><p>• Minimum 15 years of extensive experience in the Oil & Gas industry, specifically in large-scale EPC projects and cross-country pipeline construction. • Proven hands-on experience in cross-country pipeline projects, including the supervision of automatic and semi-automatic welding spreads (e.g., GMAW/FCAW with Saturnax/Serimax systems), field joint coating, NDT (RT/AUT), and hydrostatic testing. • Demonstrated track record of working with major international operators such as TotalEnergies, Saudi Aramco, or equivalent in onshore pipeline and plant facilities. • Expert knowledge of applicable pipeline codes and standards: API 1104, ASME B31.4, B31.8, DNV-ST-F101, and NACE MR0175/ISO 15156. • Solid experience in field tie-in welding, in-service welding, hot tapping, and sour service environments. • In-depth understanding of pipeline pre-commissioning and commissioning procedures, including pigging and drying operations. • Proven experience in managing pipeline QA/QC data, RT film interpretation (RTFI), and final handover dossiers to meet strict client audit requirements.</p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p>Job Duties</p><p>Leads a multi-discipline Petro technical team to support the evaluation and development of large-scale oil and gas field development projects. Lead all subsurface disciplines including geoscience (Geology, Geophysics, Earth modeling, Petrophysics), Petroleum engineering (reservoir, production, dynamic Simulation) in support of asset optimization and development planning. Provide technical direction and oversight in (i) Integration of subsurface, well, and surface data to identify production enhancement and development opportunities. (ii) Guide development and execution of the asset s reservoir management plan, depletion strategy, and surveillance programs. (iii) Ensure technical rigor and data integrity across all reservoir characterization, static &amp; dynamic modeling, forecasting, and performance analysis workflows. Act as the primary technical interface with the client s subsurface and asset management teams. Lead collaboration with production and operations teams to identify and implement production enhancement opportunities. Additionally, translates technical insights into actionable operational and development plans. Provide technical sign off on subsurface technical work, ensuring the subsurface assessment is reliable and development plans are robust. Lead technical engagements, present to and establish strong working relationships with senior management and key stakeholders. Lead subsurface team preparedness for internal and external reviews ensuring work deliverables are robust and fit-for-purpose. Fully support the utilization of technical assurance and peer review across all subsurface activities. Lead, mentor, and develop a team of subsurface professionals, promoting collaboration and technical excellence. Drive a culture of continuous learning, innovation, and performance improvement. Promote the adoption of best practices, digital tools, new technologies and innovative techniques in subsurface workflows. Provides effective coordination of technical resources working in other Halliburton Product Service Lines and Regions to support assigned Asset technical work.</p><p><br></p><p><strong>Desired Candidate Profile</strong></p>Requires an undergraduate degree in Geoscience, Petroleum Engineering or other applicable Engineering discipline and a minimum of 15 years of experience in oil and gas exploration and production roles which may include experience in geoscience, petroleum engineering, field development, technical staff supervision and management. Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator. Requires supervisory Team leadership experience Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p>Position Summary The Geology Advisor provides expert geological interpretation, reservoir characterization, and development planning support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract.</p><p>Under broad direction from the Subsurface Technical Manager: Develop and apply advanced development geology techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects. Accountable for ensuring robust geological understanding of the asset, integrating static and dynamic data to guide reservoir management, field development, and production optimization. The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.) Role includes data analysis, reservoir characterization and mapping, determination of reservoir rock and fluid properties, static uncertainty/risk management analysis, deterministic/probabilistic in-place hydrocarbon volumetric calculations, static modeling, reserves estimation, and other work related to reservoir understanding / development. Lead the interpretation of geological, geophysical, petrophysical, and drilling data to develop robust static reservoir models. Integrating well log, core, seismic, and production data to define reservoir architecture, facies distribution, and structural framework. Solid grounding in development geology and working knowledge of geologic operations, logging, directional drilling, petrophysics, geophysics, rock and core sampling and analysis, reservoir simulation and drilling &amp; completions. Understands the fundamentals of petroleum engineering, subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities. Collaborate with production and operations teams to identify and implement production enhancement opportunities. Additionally, translates technical insights into actionable operational and development plans. Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders . Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose. Mentor and provide technical guidance to less experienced geoscientists within the asset team. Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc. Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</p>

<p>Act as the technical authority for all steel structure engineering matters on the project. Lead and review: Structural steel design deliverables Shop drawings and erection drawings Design calculations and technical clarifications Ensure compliance with: TotalEnergies General and Project Specifications Applicable international standards (AISC, EN, BS, AWS, ASTM, Eurocodes) Approved IFC drawings and project design criteria Ensure structural designs are optimized for constructability, safety, and costeffectiveness . Fabrication &amp; Erection Oversight Coordinate and oversee structural steel fabrication and erection activities, including: Fabrication sequences and inspection readiness Erection methodology and stability requirements Temporary works, supports, and bracing Highstrength bolting and welding interfaces Review and approve (as applicable): Fabrication method statements Erection methodologies and lifting studies Coordinate with QA/QC Structural and Welding teams to ensure full compliance with inspection and testing requirements. Coordination &amp; Interface Management Act as the main interface between: Structural engineering Construction and erection teams QA/QC and HSE departments Coordinate interfaces with: Civil works (foundations, anchor bolts, embedded plates) Mechanical and piping supports E&amp;I structural supports and platforms Participate in design reviews, constructability reviews, and value engineering sessions. Interface with TotalEnergies and PMC representatives on all steel structure technical matters. Technical Problem Solving &amp; Change Management Resolve site and fabrication technical issues such as: Misalignments Design clashes Material substitutions Review and manage Engineering Change Notices (ECNs) related to structural steel. Evaluate technical deviations and recommend corrective solutions in line with TotalEnergies approval procedures. Support delay mitigation and recovery by providing engineering input. HSE &amp; Compliance Ensure all structural engineering and site activities comply with: TotalEnergies HSE Golden Rules Project HSE Plan and PermittoWork (PTW) system Ensure structural designs and erection methods: Minimize work at height Reduce heavy lifting risks Promote safe construction practices Participate in risk assessments, HAZID/HAZOP (as applicable), and lifting reviews. Exercise stopwork authority in case of unsafe or noncompliant activities. Quality / Reporting Responsibilities Ensure structural engineering deliverables meet TotalEnergies quality requirements. Support QA/QC teams during: Inspections and audits NCR resolution and technical evaluations Review and ensure completeness of: Structural completion dossiers Asbuilt documentation Mechanical Completion (MC) deliverables Provide regular technical progress reports and engineering status updates to project management. Support internal and external audits related to structural engineering scope. Welding Knowledge is preferrable.</p><p><strong>Desired Candidate Profile</strong></p><b>Preferred candidate profile</b><p>Bachelors Degree in Civil or Structural Engineering (mandatory).</p><p>Minimum 1215 years of experience in structural steel engineering on Oil &amp; Gas or major Industrial EPC projects .</p><p>Minimum 5 years in a Lead or Senior Structural Engineering role .</p><p>Proven experience working under TotalEnergies or equivalent International Operator standards is highly preferred.</p><p>Strong EPC Contractor or PMC project background.</p><p>Expert knowledge of structural steel design, fabrication, and erection practices.</p><p>Strong command of international structural codes and standards'</p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p>Job Duties</p><p>The Geophysics Advisor provides expert geophysical interpretation, seismic reservoir characterization, and subsurface imaging support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract. Under broad direction from the Subsurface Technical Manager:</p><ul><li>Develop and apply advanced development geophysical techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li><li>Responsible for integrating seismic, geological, and engineering data to enhance reservoir understanding, support field development planning, and reduce subsurface uncertainty.</li><li>The Geophysical Advisor will lead seismic interpretation (faults, horizons, stratigraphic features), and attribute analysis to define structural and stratigraphic frameworks</li><li>Conduct seismic inversion, AVO, and attribute studies to improve reservoir property prediction and fluid delineation.</li><li>Support time-to-depth conversion, velocity modeling, and depth imaging workflows.</li><li>Support prospect evaluation and field development work by providing validation of preexisting interpretations as well as creating new interpretations</li><li>Additionally, provide geophysical input to field development plans, well placement, and drilling programs.</li><li>Solid grounding in geophysics and working knowledge of development geology, static modeling, geologic operations, logging, directional drilling, petrophysics, reservoir simulation and drilling &amp; completions.</li><li>Understands the fundamentals of subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li><li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders .</li><li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li><li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li><li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in Geophysics and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development/technical geophysics, static modeling, operations geology, field development planning etc. Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator. Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</p><p>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Geophysics Advisor, Geophysics Advisor, Sr, and Technical Manager</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry. Job Duties Under broad direction from the Senior Reservoir Advisor and the Integrated Asset Management senior management and with support from engineering and operations staff across all Halliburton product service lines (PSL), the Reservoir Advisor works within a senior, multi- discipline petrotechnical team to develop and apply advanced reservoir engineering techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects for potential investment by IAM. The Reservoir Advisor will support prospect evaluation work by providing historical offset well performance evaluation (production decline curve analysis), determination of reservoir rock and fluid properties, deterministic as well as probabilistic in-place hydrocarbon volumetric calculations, static reservoir modeling, dynamic reservoir simulation, well test analysis, field development/re-development planning, recommendations for production enhancement, EUR / recovery efficiency analysis, forecasts of future production performance, preliminary economic analysis, and other work related to reservoir understanding / development.</p><p>Location Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61001, Iraq Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Requires an undergraduate degree in petroleum engineering and a minimum of 10 years of experience in reservoir engineering, which includes experience in an oil &amp; gas operator. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p></section>

<p><h4>About company</h4> <p>Belong, connect, grow with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Field Production Technologist is part of the Well Reservoir Facilities Management team in the Petroleum Engineering Department. The primary job purpose is to ensure technical support to wells performance, close monitoring and maintain well integrity, respond to production planning and reservoir engineers requests for well deliverability and optimization decisions on site.</p> <h4>Duties and responsibilities</h4> <ul> <li>Daily production of well performance, spot anomalies, diagnose well production issues and performance monitoring according to well operating envelope.</li> <li>Monitor and manage well integrity to minimize deferment and ensure HSE policies compliance in a safe working environment.</li> <li>Provide operational support rigless activities including wireline, slickline, well integrity, and coiled tubing operations, ensuring seamless workflow.</li> <li>Daily monitoring of workover activities (hoist, rigless perforation, stimulation, clean up, tie-in, opening up etc.).</li> <li>Production enhancement and optimization strategy evaluation and implementation.</li> <li>Recommend well recompletion/well intervention activities, supervise on site.</li> <li>Provide support to other groups for well intervention, generate proposal, data acquisition, drilling and workover, etc.</li> <li>Coordinate and conduct completion meetings, internally and externally (other department and vendors).</li> <li>Conduct well and reservoir review, present recommendation to team and stakeholders as required.</li> <li>Ensure integration and consistency between engineering and geological interpretations by close collaboration with reservoir engineer and production planners, petrophysicists, geologists, geophysicist, operations and facilities engineers.</li> <li>Peer review less experienced team members.</li> </ul> <h4>Qualifications</h4> <ul> <li>Minimum of a bachelor degree in petroleum engineering, reservoir engineering or engineering from an accredited and recognized university.</li> <li>Previously working in a multi-cultural and multi-nationalities team.</li> <li>Knowledge of well completion, intervention, drilling and workover procedures and regulations.</li> <li>Oil and gas, wells design and integrity monitoring and management from conceptual and construction until abandonment.</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 5-10 years’ experience with an operator.</li> <li>Experience in well intervention rigless operations and supervision.</li> <li>Experience in both clastic and carbonate reservoirs production strategies.</li> <li>Previously working in a multi-cultural and multi-nationalities team, international experience.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>Must be able to speak upper intermediate and above English. Arabic is an advantage.</li> <li>Experience and knowledge of advanced level nodal analysis especially using integrated production system model (IPSM) modelling software.</li> <li>Experience in other petroleum engineering standard software (intermediate level): PI, Eclipse, PVTSim, Kappa’s Saphire.</li> <li>Experience in rigless well intervention operation, site supervision, work proposal and program preparation.</li> </ul> <h4>Skills</h4> <ul> <li>Good communication and analytical skills are essential.</li> <li>Eagerness to learn and develop own skills.</li> <li>Must have a HSSE driven mindset.</li> <li>The ability to work with people from different cultural backgrounds will be essential.</li> <li>Ability to quickly determine the optimal production solution, with often conflicting or missing data or information.</li> <li>Experience and good understanding of completion, workover, stimulation design, well test analysis, production forecast and artificial lifts.</li> <li>Experience in supervising operations of production enhancements, well completion, intervention and workover procedures and regulations.</li> <li>Proven wells integrity monitoring and management from drilling, production until abandonment.</li> <li>Good diagnostic skills are required to troubleshoot problems.</li> </ul></p><p></p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p><b><br></b></p><p><b>Job Duties</b></p><p>The Petrophysics Advisor provides expert technical leadership in formation evaluation, reservoir characterization, and petrophysical analysis in support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract. Under broad direction from the Subsurface Technical Manager:</p><ul><li>Develop and apply advanced formation evaluation techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li><li>The Geophysical Advisor will perform detailed petrophysical analyses using well logs, core, and fluid data to determine porosity, permeability, water saturation, and hydrocarbon volumes.</li><li>Integrate data from multiple sources (wireline, LWD, core, SCAL, formation tests, RFT/MDT pressure test/fluid samples, mini-fracs, Diagnostic Fracture Injectivity Tests, and geochem analysis) to generate robust reservoir property models.</li><li>Evaluate and characterize different lithologies and fluid types within complex reservoir systems.</li><li>Conduct multi-well and field-level petrophysical studies to support reservoir zonation and facies classification.</li><li>Develop petrophysical models for input into geological and reservoir simulation workflows.</li><li>Provide technical oversight during logging operations (wireline and LWD) and post-job evaluations.</li><li>Oversee the acquisition, processing, and interpretation of well logging data, ensuring data integrity and quality.</li><li>Ensure consistency and standardization of petrophysical workflows and data management across the asset.</li><li>Solid grounding in petrophysics and working knowledge of development geology, static modeling, geomechanics, geologic operations, directional drilling and drilling &amp; completions.</li><li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders</li><li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li><li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li><li>Promote the adoption of best practices, digital tools, and innovative techniques and technologies in petrophysics.</li><li>The Petrophysics Advisor will collaborate and stay engaged with other key Halliburton petrophysical technical and product service line professionals, resources and research.</li></ul><p>Location</p><p>Oils Opertion ST,N 29 Burjesia, Basra, Basrah, 61001, Iraq</p><p>Job Details</p><p>Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time</p><p>Additional Locations for this position:</p><p>Compensation Information Compensation is competitive and commensurate with experience.</p><p>Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With approximately 50,000 employees, representing 140 nationalities, and operations in approximately 70 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction, completion and production optimization.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in petroleum engineering, geology or Applied sciences and a minimum of 10 years of experience in petrophysical evaluation, which includes experience in oil &amp; gas operators, service companies or consulting companies. Requires field development and reservoir management experience on a producing field for an oil &amp; gas operator. Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>The Geophysics Advisor provides expert geophysical interpretation, seismic reservoir characterization, and subsurface imaging support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract.</p><br> <p>Under broad direction from the Subsurface Technical Manager:</p><br> <ul> <li>Develop and apply advanced development geophysical techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li> <li>Responsible for integrating seismic, geological, and engineering data to enhance reservoir understanding, support field development planning, and reduce subsurface uncertainty.</li> <li>The Geophysical Advisor will lead seismic interpretation (faults, horizons, stratigraphic features), and attribute analysis to define structural and stratigraphic frameworks</li> <li>Conduct seismic inversion, AVO, and attribute studies to improve reservoir property prediction and fluid delineation. Support time-to-depth conversion, velocity modeling, and depth imaging workflows.</li> <li>Support prospect evaluation and field development work by providing validation of preexisting interpretations as well as creating new interpretations</li> <li>Additionally, provide geophysical input to field development plans, well placement, and drilling programs.</li> <li>Solid grounding in geophysics and working knowledge of development geology, static modeling, geologic operations, logging, directional drilling, petrophysics, reservoir simulation and drilling &amp; completions.</li> <li>Understands the fundamentals of subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li> <li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders.</li> <li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li> <li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li> <li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li> </ul> <p><strong>Qualifications</strong></p><br> <ul> <li>Requires an undergraduate degree in Geophysics and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development/technical geophysics, static modeling, operations geology, field development planning etc.</li> <li>Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator.</li> <li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li> </ul> <p><span>Minimum Qualifications:</span> <span>Minimum qualifications may be acquired through</span> <span>technical schools or </span><span>equivalent</span> <span>related</span> <span>experience. Candidates</span> <span>having qualifications that exceed the minimum job </span><span>requirements will receive consideration for higher level roles given (1) their experience, (2) </span><span>additional job requirements, and/or (3) business needs. Depending on education, experience, and </span><span>skill level, a</span> <span>variety of job opportunities might be available, including Geophysics Advisor, Geophysics Advisor, Sr</span><span>, and Technical Manager</span></p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210429&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Under the supervision of Fire Prevention Lead, the Fire Inspector p lans, organizes, and conducts fire prevention activities throughout to include fire inspections, fire investigations, public education, plan reviews, and fire protection system acceptance inspections. Assist implements the Fire Prevention Program to ensure compliance with Performance Work Statement, Army Regulation 420-1, DoDI 6055.06, Unified Facilities Criteria (UFC), policies, and National Fire Protection Association (NFPA) standards.</p><p>Conducts inspections and maintains documentation of all facility fire inspections. Performs plan reviews to ensure fire protection systems are IAW with policies and UFC s guidance. Participates and maintains the fire extinguisher exchange program for facilities. Conducts Facility Manager, Fire Warden and other fire prevention training. Works with DPW, conducts final acceptance inspections on new construction, and renovation projects. Maintains appropriate documentation on the inspection and testing of sprinkler systems. Participate in Environmental Safety and Health (ESH) programs. Helps formulate long range goals related protection of personnel, facilities, materials, and equipment. Assists with fire investigations as required under AR 420-1 specifications.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High School Diploma. Associate degree in Fire Science from an accredited college preferred</li><li>Must be IFSAC or Proboard certified</li><li>Must have a Fire Inspector I certification</li><li>Must have a Fire Instructor I certification</li><li>Must have a HazMat Operations certification</li><li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li><li>OCN Qualifications/Experience Requirements: High school diploma or equivalent</li><li>Must be IFSAC or Proboard certified</li><li>Must have a Fire Inspector I certification</li><li>Must have a Fire Instructor I certification</li><li>Must have a HazMat Operations certification</li><li>Must be able to read, speak and write English fluently</li><li>Required: 5 years of related work experience.</li><li>Preferred: Fire inspector experience as a Fire Prevention Specialist, US Military, DOD, or civilian</li><li>Highly Desirable: Certifications as a Fire Investigator and/or Plans Reviewer</li><li>Be able to work with minimum supervision.</li><li>Must possess strong written and spoken communication skills and general word processing and computer skills.</li><li>Must have knowledge of occupancy classification types, the fire hazards present in various occupancies, and the occupant load factors relating to various occupancy classifications. Knowledge of fire department mission and organization; safety requirements and objectives; fire alarm and communications; fire behavior; portable fire extinguishers; personal protective clothing and equipment, water supplies and sprinklers; hazardous materials; fire prevention and public fire education; and fire cause determination</li><li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well.</li><li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work.</li><li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li><li>Must comply with all Fire and Safety Regulations and post policies.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> </span><p><strong><span>GARDAWORLD CONTRACTOR ROLE SPECIFICATION</span></strong></p><br> <br> <p><strong><span>Position&nbsp;&nbsp;</span></strong></p><br> <p><strong><span>Communications Technician</span></strong></p><br> <br> <p><strong><span>Role Type</span></strong></p><br> <p><strong><span>Contractor, GW Consulting Middle East Limited</span></strong></p><br> <br> <p><strong><span>Project</span></strong></p><br> <p><strong><span>FCDO Baghdad</span></strong></p><br> <br> <p><strong><span>Client</span></strong></p><br> <p><strong><span>Foreign, Commonwealth and Development Office (FCDO)</span></strong></p><br> <br> <p><strong><span>Location &nbsp;&nbsp; &nbsp;</span></strong></p><br> <p><strong><span>Baghdad, Iraq</span></strong></p><br> <br> <p><strong><span>Est. Start Date</span></strong></p><br> <p><strong><span>TBC (subject to further confirmation/successful onboarding/visa processing)</span></strong></p><br> <br> <p><strong><span>Duration of Task</span></strong></p><br> <p><strong><span>Open ended</span></strong></p><br> <br> <p><strong><span>Duty Rotation</span></strong></p><br> <p><span>6 weeks on, 6 weeks off, subject to operational requirements.</span></p><br> <br> <p><strong><span>Travel Pay</span></strong></p><br> <p><span>Contractors are not entitled to pay while travelling. The first day of pay is the day of arrival in the country of operations. The last day of pay is the day of departure from the country of operations. Regardless of the time of arrival and departure, contractors are entitled to half of the daily on duty rate on the day of their arrival in and departure from the country of operations.</span></p><br> <br> <p><strong><span>Visa Requirements</span></strong></p><br> <p><span>The Company shall be responsible and liable for the multi-entry visa cost as required in order to deliver the Services. Any visa costs incurred by the Contractor shall be reimbursed.</span></p><br> <br> <p><strong><span>Package</span></strong></p><br> <p><span>GardaWorld will provide the Independent Contractor with appropriate accommodation, insurance, flights and life support while on duty.</span></p><br> <p><strong><span>Food, Accommodation and General Expenses:</span></strong></p><br> <p><span>Company will provide the Contractor with food, drink, transportation and accommodation as necessary whilst the Contractor is engaged in a project.</span></p><br> <p><span>If Company is unable to provide the Contractor with food, accommodation and transportation, except as set forth below for inbound and outbound travel to the project location,&nbsp;Company shall either provide a per diem at an agreed rate or&nbsp;reimburse to the Contractor for any travelling, hotel and other expenses reasonably incurred by him in the proper performance of his duties under this Agreement. In the case of the latter, the Contractor must provide Company with such vouchers and receipts or other evidence of actual payment of such expenses as Company may reasonably require. The Contractor shall seek the prior approval by Company for any individual expenses incurred under this Agreement.</span></p><br> <br> <p><strong><span>Flight Package</span></strong></p><br> <p><span>GardaWorld will provide an economy class return ticket per rotation to the project location from a hub airport as close as reasonably practicable to the Contractor’s declared home address.</span></p><br> <p><span>The Contractor will be asked to declare their preferences for a primary, secondary and tertiary hub airport from the GardaWorld hub list at the commencement of their engagement. Where possible and commercially acceptable, GardaWorld will look to book travel to and from one of the preferred hubs.</span></p><br> <p><span>The Contractor will be responsible for any travel arrangements between the hub airport and their home address.&nbsp; The Company will pay for any transfers from the airport near the project location or such other intermediate landing location to the Consultant’s accommodations at the project.</span></p><br> <p><span>Further information can be found in the GardaWorld Contractor Travel Standard Operating Instruction (SOI), copy will be provided upon acceptance.</span></p><br> <br> <p><strong><span>Role Requirements</span></strong></p><br> <p><strong><span>Essential Requirements:</span></strong></p><br> <ul> <li><span>Proven and demonstrable experience of commercial communications systems; HF/VHF/UHF radio, Satellite telephone systems, as well as ECM, IT, RF Safety.</span></li> <li><span>Fluent written and spoken English</span></li> <li><span>BTEC National Certificate in Telecommunications – Electrical/Electronic Engineering; Or</span></li> <li><span>Former military Telecommunications Technician/Operator with minimum 3 years’ experience.</span></li> </ul> <p><strong><span>Desirable:</span></strong></p><br> <ul> <li><span>Ex-Military with a minimum of 2 years’ experience of static operations rooms and commercial communications equipment.</span></li> <li><span>Ability to clearly communicate technical concepts and information to non-technical personnel.</span></li> <li><span>Demonstrable knowledge of relevant communications standards or best practice e.g. Vehicle installations, antenna and feeder types and uses along with installation practice, current regulations regarding equipment types and future developments.</span></li> </ul> <p><strong><span>Additional Qualities</span></strong></p><br> <ul> <li><span>Team member</span></li> <li><span>Able to work unsupervised for long periods</span></li> <li><span>Good communication skills</span></li> <li></li></ul> </div>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<p><h4>About company</h4> <p>Belong, connect, grow, with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals. KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Production Technologist is part of the Well Reservoir Facilities Management team in the Petroleum Engineering Department. The primary job purpose is to ensure technical support to wells performance, close monitoring and maintain well integrity, respond to production planning and reservoir engineers requests for well deliverability and optimization decisions.</p> <h4>Duties and responsibilities</h4> <ul> <li>Daily production of well performance, spot anomalies, diagnose well production issues and performance monitoring according to well operating envelope.</li> <li>Monitor and manage well integrity to minimize deferment and ensure HSE policies compliance in a safe working environment.</li> <li>Daily monitoring of workover activities (hoist, rigless-perforation, stimulation, clean up, tie-in, opening up etc).</li> <li>Production enhancement and optimisation strategy evaluation and implementation.</li> <li>Recommend well recompletion/well intervention activities, supervise on site, and support FDP implementation.</li> <li>Regular update of well operating envelope according to reservoir management plan and work closely with production planning and production operations.</li> <li>Identify, propose and evaluate opportunities to improve hydrocarbon production and reservoir recovery.</li> <li>Provide support to other groups for well intervention, generate proposal, data acquisition, drilling and workover, etc.</li> <li>Coordinate and conduct completion meetings, internally and externally (other department and vendors).</li> <li>Maintain, perform nodal analysis and update IPM model to support WRFM team on future reservoir development, depletion planning and reserves assessment.</li> <li>Conduct well and reservoir review, present recommendation to team and stakeholders as required.</li> <li>Ensure integration and consistency between engineering and geological interpretations by close collaboration with reservoir engineer and production planners, petrophysicists, geologists, geophysicist, operations and facilities engineers.</li> <li>Peer review less experienced team members.</li> </ul> <h4>Qualifications</h4> <ul> <li>Minimum of a Bachelor degree in Petroleum Engineering, Reservoir Engineering or engineering from an accredited and recognized university.</li> <li>Previously working in a multi-cultural and multi-nationalities team.</li> <li>Knowledge of well completion, intervention, drilling and workover procedures and regulations.</li> <li>Oil and Gas, wells design and integrity monitoring and management from conceptual and construction until abandonment.</li> </ul> <h4>Experience</h4> <ul> <li>Minimum 10-15 years’ experience with an operator.</li> <li>Experience in both clastic and carbonate reservoirs production strategies.</li> <li>Previously working in a multi-cultural and multi-nationalities team, international experience.</li> </ul> <h4>Language proficiency, computer and software skills</h4> <ul> <li>Must be able to speak upper intermediate and above English. Arabic is an advantage.</li> <li>Experience and knowledge of advanced level nodal analysis especially using Integrated Production System Model (IPSM) modelling software.</li> <li>Experience in other petroleum engineering standard software (intermediate level): PI, Eclipse, PVTSim, Kappa’s Saphire.</li> </ul> <h4>Skills</h4> <ul> <li>Good communication and analytical skills are essential.</li> <li>Eagerness to learn and develop own skills.</li> <li>Strong leadership skills, ability to delegate, and work with minimum supervision.</li> <li>Must have a HSSE driven mindset.</li> <li>The ability to work with people from different cultural backgrounds will be essential.</li> <li>The position will involve working with government, vendors or partner representatives.</li> <li>Ability to quickly determine the optimal production solution, with often conflicting or missing data or information.</li> <li>Experience and good understanding of completion, workover, stimulation design, well test analysis, production forecast and artificial lifts.</li> <li>Experience in supervising operations of production enhancements, well completion, intervention and workover procedures and regulations.</li> <li>Proven wells integrity monitoring and management from drilling, production until abandonment.</li> <li>Good diagnostic skills are required to troubleshoot problems.</li> </ul></p><p></p>

<p>We are looking for the right people people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world s largest providers of products and services to the global energy industry.</p><p>Position Summary The Geology Advisor provides expert geological interpretation, reservoir characterization, and development planning support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract.</p><p>Under broad direction from the Subsurface Technical Manager:</p><ul><li>Develop and apply advanced development geology techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li><li>Accountable for ensuring robust geological understanding of the asset, integrating static and dynamic data to guide reservoir management, field development, and production optimization.</li><li>The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.)</li><li>Role includes data analysis, reservoir characterization and mapping, determination of reservoir rock and fluid properties, static uncertainty/risk management analysis, deterministic/probabilistic in-place hydrocarbon volumetric calculations, static modeling, reserves estimation, and other work related to reservoir understanding / development.</li><li>Lead the interpretation of geological, geophysical, petrophysical, and drilling data to develop robust static reservoir models.</li><li>Integrating well log, core, seismic, and production data to define reservoir architecture, facies distribution, and structural framework.</li><li>Solid grounding in development geology and working knowledge of geologic operations, logging, directional drilling, petrophysics, geophysics, rock and core sampling and analysis, reservoir simulation and drilling &amp; completions.</li><li>Understands the fundamentals of petroleum engineering, subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li><li>Collaborate with production and operations teams to identify and implement production enhancement opportunities.</li><li>Additionally, translates technical insights into actionable operational and development plans.</li><li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders</li><li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li><li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li><li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li></ul><p>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p><p>Job Details</p><p>Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time</p><p>Compensation Information Compensation is competitive and commensurate with experience.</p><p>Founded in 1919, Halliburton is one of the world's largest providers of products and services to the energy industry. With approximately 50,000 employees, representing 140 nationalities, and operations in approximately 70 countries, the company serves the upstream oil and gas industry throughout the lifecycle of the reservoir – from locating hydrocarbons and managing geological data, to drilling and formation evaluation, well construction, completion and production optimization.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc. Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator. Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p>The Petrophysics Advisor provides expert technical leadership in formation evaluation, reservoir characterization, and petrophysical analysis in support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract.</p><br> <p>Under broad direction from the Subsurface Technical Manager:</p><br> <ul> <li>Develop and apply advanced formation evaluation techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li> <li>The Geophysical Advisor will perform detailed petrophysical analyses using well logs, core, and fluid data to determine porosity, permeability, water saturation, and hydrocarbon volumes. Integrate data from multiple sources (wireline, LWD, core, SCAL, formation tests, RFT/MDT pressure test/fluid samples, mini-fracs, Diagnostic Fracture Injectivity Tests, and geochem analysis) to generate robust reservoir property models. Evaluate and characterize different lithologies and fluid types within complex reservoir systems. Conduct multi-well and field-level petrophysical studies to support reservoir zonation and facies classification. Develop petrophysical models for input into geological and reservoir simulation workflows.</li> <li>Provide technical oversight during logging operations (wireline and LWD) and post-job evaluations. Oversee the acquisition, processing, and interpretation of well logging data, ensuring data integrity and quality. Ensure consistency and standardization of petrophysical workflows and data management across the asset.</li> <li>Solid grounding in petrophysics and working knowledge of development geology, static modeling, geomechanics, geologic operations, directional drilling and drilling &amp; completions.</li> <li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders</li> <li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li> <li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li> <li>Promote the adoption of best practices, digital tools, and innovative techniques and technologies in petrophysics. The Petrophysics Advisor will collaborate and stay engaged with other key Halliburton petrophysical technical and product service line professionals, resources and research.</li> </ul> <p><strong>Qualifications</strong></p><br> <ul> <li>Requires an undergraduate degree in petroleum engineering, geology or Applied sciences and a minimum of 10 years of experience in petrophysical evaluation, which includes experience in oil &amp; gas operators, service companies or consulting companies.</li> <li>Requires field development and reservoir management experience on a producing field for an oil &amp; gas operator.</li> <li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li> </ul> <p><span>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Petrophysics Advisor, Petrophysics Advisor, Sr, and Technical Manager.&nbsp;</span></p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210427&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span> <span></span></span><p>We are looking for the right people — people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world’s largest providers of products and services to the global energy industry.</p><br><b>Job Duties</b> <br><p><strong>Position Summary</strong></p><br> <p>The Geology Advisor provides expert geological interpretation, reservoir characterization, and development planning support for an oil and gas asset managed under an Integrated Asset Management (IAM) contract.&nbsp;</p><br> <p><strong>Job Duties</strong></p><br> <p>Under broad direction from the Subsurface Technical Manager:</p><br> <ul> <li>Develop and apply advanced development geology techniques in support of the evaluation and development of potentially large, yet challenging oil and gas field development projects.</li> <li>Accountable for ensuring robust geological understanding of the asset, integrating static and dynamic data to guide reservoir management, field development, and production optimization.</li> <li>The Geology Advisor will support prospect evaluation work by providing validation of preexisting interpretations as well as creating new interpretations (e.g., structure maps, isopach maps, cross sections, annotated bubble maps, etc.)</li> <li>Role includes data analysis, reservoir characterization and mapping, determination of reservoir rock and fluid properties, static uncertainty/risk management analysis, deterministic/probabilistic in-place hydrocarbon volumetric calculations, static modeling, reserves estimation, and other work related to reservoir understanding / development.</li> <li>Lead the interpretation of geological, geophysical, petrophysical, and drilling data to develop robust static reservoir models. Integrating well log, core, seismic, and production data to define reservoir architecture, facies distribution, and structural framework.</li> <li>Solid grounding in development geology and working knowledge of geologic operations, logging, directional drilling, petrophysics, geophysics, rock and core sampling and analysis, reservoir simulation and drilling &amp; completions.</li> <li>Understands the fundamentals of petroleum engineering, subsurface uncertainties, risks and technical issues associated with subsurface, wells and surface development opportunities.</li> <li>Collaborate with production and operations teams to identify and implement production enhancement opportunities. Additionally, translates technical insights into actionable operational and development plans.</li> <li>Be actively involved in technical engagements, present to and establish strong working relationships with senior management and key stakeholders.</li> <li>Present to and participate in internal and external reviews ensuring work deliverables are robust and fit-for-purpose.</li> <li>Mentor and provide technical guidance to less experienced geoscientists within the asset team.</li> <li>Promote the adoption of best practices, digital tools, and innovative techniques in geoscience.</li> </ul> <p><strong>Qualifications</strong></p><br> <ul> <li>Requires an undergraduate degree in Geoscience and a minimum of 10 years of experience in oil and gas exploration and production roles which may include experience in development geology, static modeling, operations geology, field development planning etc.</li> <li>Requires field development and reservoir management experience working directly (preferred) or indirectly on a producing field for an oil &amp; gas operator</li> <li>Extensive experience in clastic and/or carbonate reservoirs; exposure to mature or brownfield assets preferred</li> </ul> <p><span>Minimum Qualifications: Minimum qualifications may be acquired through technical schools or equivalent related experience. Candidates having qualifications that exceed the minimum job requirements will receive consideration for higher level roles given (1) their experience, (2) additional job requirements, and/or (3) business needs. Depending on education, experience, and skill level, a variety of job opportunities might be available, including Geology Advisor, Geology Advisor, Sr, and Technical Manager.&nbsp;</span></p><br><br><br><br><p><strong>Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation</strong>.</p><br> <p><strong><u>Location</u></strong></p><br> <p>Oils Opertion ST,N°29 Burjesia,&nbsp;Basra,&nbsp;Basrah,&nbsp;61001, Iraq</p><br> <p><strong><u>Job Details</u></strong></p><br> <p><strong>Requisition Number:</strong>&nbsp;210422&nbsp;&nbsp;<br><strong>Experience Level:&nbsp;</strong>Experienced Hire&nbsp;<br><strong>Job Family:</strong>&nbsp;Engineering/Science/Technology&nbsp;<br><strong>Product Service Line:&nbsp;</strong>Halliburton Project Management&nbsp;&nbsp;&nbsp;<br><strong>Full Time / Part Time:&nbsp;</strong>Full Time</p><br> <p><strong>Additional Locations for this position:&nbsp;</strong></p><br> <p><u><strong>Compensation Information</strong></u><br>Compensation is competitive and commensurate with experience.</p><br> </div>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p>Knowledge &amp; Skills Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>GARDAWORLD CONTRACTOR ROLE SPECIFICATION Position Communications Technician Role Type Contractor, GW Consulting Middle East Limited Project FCDO Baghdad Client Foreign, Commonwealth and Development Office (FCDO) Location Baghdad, Iraq Est. Start Date TBC (subject to further confirmation/successful onboarding/visa processing) Duration of Task Open ended Duty Rotation 6 weeks on, 6 weeks off, subject to operational requirements. Travel Pay Contractors are not entitled to pay while travelling. The first day of pay is the day of arrival in the country of operations. The last day of pay is the day of departure from the country of operations. Regardless of the time of arrival and departure, contractors are entitled to half of the daily on duty rate on the day of their arrival in and departure from the country of operations. Visa Requirements The Company shall be responsible and liable for the multi-entry visa cost as required in order to deliver the Services. Any visa costs incurred by the Contractor shall be reimbursed. Package GardaWorld will provide the Independent Contractor with appropriate accommodation, insurance, flights and life support while on duty. Food, Accommodation and General Expenses: Company will provide the Contractor with food, drink, transportation and accommodation as necessary whilst the Contractor is engaged in a project. If Company is unable to provide the Contractor with food, accommodation and transportation, except as set forth below for inbound and outbound travel to the project location, Company shall either provide a per diem at an agreed rate or reimburse to the Contractor for any travelling, hotel and other expenses reasonably incurred by him in the proper performance of his duties under this Agreement. In the case of the latter, the Contractor must provide Company with such vouchers and receipts or other evidence of actual payment of such expenses as Company may reasonably require. The Contractor shall seek the prior approval by Company for any individual expenses incurred under this Agreement. Flight Package GardaWorld will provide an economy class return ticket per rotation to the project location from a hub airport as close as reasonably practicable to the Contractor s declared home address. The Contractor will be asked to declare their preferences for a primary, secondary and tertiary hub airport from the GardaWorld hub list at the commencement of their engagement. Where possible and commercially acceptable, GardaWorld will look to book travel to and from one of the preferred hubs. The Contractor will be responsible for any travel arrangements between the hub airport and their home address. The Company will pay for any transfers from the airport near the project location or such other intermediate landing location to the Consultant s accommodations at the project. Further information can be found in the GardaWorld Contractor Travel Standard Operating Instruction (SOI), copy will be provided upon acceptance.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Proven and demonstrable experience of commercial communications systems; HF/VHF/UHF radio, Satellite telephone systems, as well as ECM, IT, RF Safety.</li><li>Fluent written and spoken English</li><li>BTEC National Certificate in Telecommunications Electrical/Electronic Engineering; Or</li><li>Former military Telecommunications Technician/Operator with minimum 3 years experience.</li></ul><h4>Desirable:</h4><ul><li>Ex-Military with a minimum of 2 years experience of static operations rooms and commercial communications equipment.</li><li>Ability to clearly communicate technical concepts and information to non-technical personnel.</li><li>Demonstrable knowledge of relevant communications standards or best practice e.g. Vehicle installations, antenna and feeder types and uses along with installation practice, current regulations regarding equipment types and future developments.</li></ul><h4>Additional Qualities</h4><ul><li>Team member</li><li>Able to work unsupervised for long periods</li><li>Good communication skills</li><li>Pro-active and keeping abreast of future technical innovations.</li><li>Ability to work in arduous conditions</li><li>*All candidates will need to be screened to SC level or eligible for screening so only British &amp; Commonwealth passport holders can apply.</li><li>Proviso: You must have been resident in the UK for at least two of the previous 10 years immediately prior to your application, at least one year of which must have been a consecutive twelve month period unless you have served overseas with HM Forces or in some other official capacity as a representative of Her Majesty s Government, or have lived overseas as a result of your parents or partner s Government employment.</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Balad, Iraq*** Under the supervision of the Firefighter Crew Chiefs, the Firefighter responds to multiple-types of emergencies operating as a firefighter. Maintains vehicles, equipment, tools, and protective clothing in a serviceable condition. Extinguish fires and takes precautions to prevent fire rekindling. Operates pumps, foam generators, turrets, nozzles, and other firefighting tools and equipment. Exercises caution to avoid personal injury and property damage and comply with strict health and safety standards. At the site of a fire protects and preserves evidence indicating the cause of the fire. Properly wears personal protective clothing. Conducts and take part in frequent reoccurring proficiency training, OJT and maintains required certifications. Performs other duties as assigned. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Participates as a positive team member and understands and conforms to the LOGCAP V contract Performance Work Statement. + Actively participates and maintains a safe workplace, ensuring safety is the highest priority. + Complies with all Environmental, Health, and Safety (EHS) and Quality Assurance (QA) requirements and goals. + Maintains documentation as necessary to meet these requirements. + Ensures emergency equipment is operational and in a state of readiness as required by NFPA or other industry standards. + Maintains and clean personal protective equipment and works as an effective team member in cleaning equipment and facilities. + As part of a team conducts fire inspections, pre-incident planning and ensures that facilities are safe and documentation is recorded and tracked. + Operates computerized digital fire alarm receiving equipment including two-way radio communications equipment. + Performs additional property control and logistical duties in support of fire department operations to include, maintaining accountability of equipment, scheduling maintenance of equipment, coordinating appointments of subordinates, and other administrative duties as needed. + Serves as a team member on a rescue unit, ladder truck, engine company, water tender, or airport ARFF apparatus. + Enters burning or contaminated structures, vehicles, and other immediately dangerous to life and health areas to fight fires and/or perform rescues while wearing required personal protective equipment. + Acts as a crew member for structural fires, aircraft fires, rescue operations, medical emergencies, hazardous materials responses and other emergency events as directed in accordance with process and procedures identified in the department, standard operating procedures. + Performs duties in support of organizational metrics. + Adequately and honestly tracks all data related to metrics. + Provides direct support to the achievement of all metrics related to the LOGCAP V. + Attends meeting in the absence of the supervisor or as needed. + Communicates professionally both orally and in writing with team members and others, as needed, to relay information necessary for job success. + This includes, but is not limited to, performance appraisals, job requirements, division metrics, projects, quality standard procedures, and safety practices. + Performs other duties as required. Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Must be able to pass annual firefighter Occupations Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583 + Must be available for recall. + Required to have IFSAC or Pro-Board Certification to these levels: Hazardous Materials Awareness and Operations, Fire Fighter II, Airport Firefighter (ARFF), Driver Operator Pumper and Driver Operator ARFF, Mobile Water Supply, CPR &amp; First Aid Responder and Telecommunicator II. + Experience: + Minimum Five (5) years experience as a Fire Fighter working on a DOD Installation. + Skills: + Possess the ability to demonstrate firefighter knowledge and skills in a professional manner. + Ability to work effectively with fellow employees and management personnel at all levels to include multinational staff, and military officials. + Strong ability to exercise professional discretion and good judgment and to understand the effect of decisions made. + Exhibit strong interpersonal skills and ability to communicate in English both verbally and writing and must have good computer skills in MS-Word, MS-Excel, and MS- Outlook. + Working Conditions: + Duties will involve the conduct of work in the outdoors with a potential exposure to extreme climatic conditions including frequent dust storms and high temperatures up to 130 degrees in the summer months. + Potential exposure to chemical or biological agents could exist. + Employee use of personal protective equipment (PPE) in certain areas is required. + Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire Department, company, and Army safety policies. + Must be able to respond and work in all types of weather and in less than ideal conditions and may have to enter hazardous environments. + Must be able climb ladders to gain access to upper levels of buildings or to rescue individuals from burning structures or when trapped. + Physical Requirements: + Must meet or exceed physical requirements contained in the current edition NFPA 1582, including but not limited to the physical strength and ability to perform heavy and strenuous tasks for extended periods of time under dangerous and uncomfortable conditions, often while wearing bulky protective gear, including self-contained breathing apparatus. + Must be available for recall and manage personnel issues off duty. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>