branch manager Jobs in Iraq

<p>Riggers are highly specialized in moving jobs that cannot be accomplished by ordinary means and use equipment expressly designed for moving and lifting objects weighing hundreds of thousands or even millions of pounds or kilograms in places where ordinary material handling equipment cannot go. He/she performs assignments, as directed by the crew chief or field supervisor, involved in the installation of power plants, facilities, and new oilfield pumping units and maintenance/inspections of existing oilfield pumping units. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Signal or verbally direct workers engaged in hoisting and moving loads, to ensure safety of workers and materials.</li><li>Test rigging to ensure safety and reliability.</li><li>Attach loads to rigging to provide support or prepare them for moving, using hand and power tools</li><li>Select gear such as slings, shackles, chokers and winches, per load weights and sizes, facilities, and work schedules.</li><li>Control movement of heavy equipment through narrow openings or confined spaces, using chain falls, gin poles, gallows frames, and other equipment.</li><li>Tilt, dip, and turn suspended loads to maneuver over, under, and/or around obstacles, using multi-point suspension techniques.</li><li>Manipulate rigging lines, hoists, and pulling gear to move or support materials such as heavy equipment.</li><li>Clean and dress machine surfaces and component parts.</li><li>Attach pulleys and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms, using bolts and clamps</li><li>Dismantle and store rigging equipment after use.</li><li>Use proper rigging apparatus (i.e. chains, slings and ropes) and techniques to ensure safe and proper lifting is performed.</li><li>Work in adverse weather conditions including high and low temperatures and windy conditions</li><li>Ensure that safety is included in all aspects of each job he/she performs.</li><li>Use this position to influence operational personnel and visitors to do the same.</li><li>Demonstrate support / use of JSAs for every task and actively assist the work group when they are developed.</li><li>Attendance of all scheduled safety meetings and training.</li><li>Participate in regular scheduled audits of equipment and tools.</li><li>Identifying sub-standard acts and near misses.</li><li>Assist in all safety and environmental incident investigations to help determine root cause.</li><li>Ensure that he complies with the required STOP Observations and Near Miss Programs</li><li>Perform other duties as assigned</li><li>Travel extensively (internationally and domestically)</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><p><strong>Required Qualifications &amp; Experience :</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Basic English language skills are required.</li><li>High School Diploma and related mechanical experience (carpentry, lifts, cranes, etc.)</li><li>Rigger / Auxiliary Moving &amp; Material Handling Equipment Certifications highly desired but not required</li></ul><p><strong>Desired Characteristics:</strong></p><ul><li>Experience of power generation (gas/steam turbines) and associated auxiliary equipment</li><li>Application of the Correct Rigging Tackle (ie Capable of Safely Lifting the Specified Loads)</li><li>Identification of Specific Shackles and Beam Clamps</li><li>Color Codes of Lifting Slings or Wires be they Belt Slings or Endless Bag Slings and or Wire Strops</li><li>Safety Mandatory Emergency Stop Signals</li><li>Able to Understand and act upon the Basic Safe Systems of Work and Method Statement showing any Approved Rigging Studies.</li><li>Overhead Crane Operation be it Pendant or Cab or Remotely Operated.</li><li>Working knowledge of Forklift, Tele Handler, Scissor Lift, Cherry Picker, Tractor (Tractor Cottil with lifting Arm), O/H Crane, etc.</li></ul>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: IT & telecom construction lead</h4> <p><strong>Location:</strong> Majnoon Oil Field, Iraq (Rotation alignment 28/28)<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The IT & Telecom Lead / Construction Supervisor – Telecommunications is responsible for overseeing all telecommunications construction activities across greenfield and brownfield scopes within the Majnoon Oil Field. The role ensures safe execution, technical integrity, compliance with international standards, and alignment with project cost and schedule objectives. This position provides leadership to telecom technicians and contractors while coordinating closely with Engineering, HSE, Construction, and Contracts & Procurement teams.</p> <h4>Accountability / expectations</h4> <ul> <li>Ensure full compliance with KBR and project HSE standards across all telecom construction activities.</li> <li>Enforce safe work practices related to confined space entry, lifting operations, electrical safety, and cable installation.</li> <li>Promote a proactive safety culture through regular inspections, toolbox talks, and risk mitigation planning.</li> </ul> <h4>Telecommunications construction oversight</h4> <ul> <li>Supervise installation, configuration, testing, and preservation of telecom systems including: <ul> <li>Fiber optic networks</li> <li>Structured cabling</li> <li>Radio systems</li> <li>PAGA</li> <li>CCTV</li> <li>Access control systems (ACS)</li> <li>PIDs</li> <li>Voice, data, and video networks</li> </ul> </li> <li>Review and validate vendor test results for fiber optic and network performance.</li> <li>Manage telecom contractors and vendors, ensuring adherence to project specifications and quality requirements.</li> <li>Support development of construction strategies for both greenfield and brownfield scopes.</li> <li>Work with the discipline lead to ensure alignment on scope, quality, cost, and schedule.</li> <li>Ensure Engineering and Contracts & Procurement deliverables match construction sequencing and handover milestones.</li> <li>Conduct constructability reviews to identify risks, improve productivity, and optimize execution plans.</li> <li>Integrate telecom infrastructure into the broader construction plan with minimal operational disruption.</li> <li>Provide accurate progress reporting and maintain documentation integrity.</li> <li>Identify and resolve technical issues in coordination with Engineering and contractors.</li> <li>Ensure telecom systems comply with international standards and project-specific requirements.</li> <li>Lead multiple concurrent telecom construction packages, ensuring timely and quality delivery.</li> <li>Collaborate with cross-functional teams to understand operational requirements and deliver fit-for-purpose telecom solutions.</li> <li>Lead and motivate telecom technicians and contractor teams, setting clear objectives and expectations.</li> <li>Provide technical guidance, coaching, and performance oversight.</li> <li>Communicate effectively with stakeholders, including non-technical personnel, ensuring clarity of requirements and interfaces.</li> <li>Deliver telecom construction activities safely, on schedule, and within budget.</li> <li>Maintain strict compliance with project specifications, standards, and HSE requirements.</li> <li>Ensure quality of installation, testing, and commissioning activities.</li> <li>Drive productivity improvements and resource-based planning (Level 4 Scheduling).</li> <li>Maintain strong coordination between contractors, engineering, and client representatives.</li> <li>Ensure seamless integration of telecom systems into operational infrastructure.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree in Telecommunications, Electrical Engineering, or related discipline.</p> <h4>Experience</h4> <ul> <li>10+ years of experience in oil & gas telecommunications systems.</li> <li>5–10 years of construction supervision experience.</li> <li>Strong background in fiber optics, structured cabling, radio communication, CCTV, SCADA, and PAGA systems.</li> <li>Experience in remote, challenging environments and both brownfield and greenfield projects.</li> <li>Knowledge of international telecom standards and oil & gas HSE regulations.</li> <li>Strong leadership and team-building capability.</li> <li>Proven experience in productivity measurement and resource-based planning.</li> <li>Excellent communication and coordination skills.</li> <li>Ability to manage multiple projects simultaneously.</li> </ul></p><p></p>

<p>The Cluster Support Officer is responsible for (Follow up), Oversaw operational coordination between internal teams, government entities, and vendors, ensuring timely processing of invoices, managing expense reports, and procurement requests (RFQ/RFP, PR). Managed government-related documentation and approvals for site upgrades or dismantling. Ensured compliance with environmental, financial, Security and safety requirements while maintaining accurate reporting and liaising directly with stakeholders for payments, surveys, and regulatory follow-ups., solve and complete/achieving all tasks in the best way to implement all corporate goals and requirements in a way that reflects positively on the company.</p><p>Government Entity Coordination &amp; Payments:</p><ul><li>Facilitate timely payments to government entities by preparing required documentation and visiting relevant offices.</li><li>Ensure compliance with governmental procedures for transactions related to site operations, utilities, and licensing</li></ul><p>Environmental Compliance:</p><ul><li>Oversee and manage all procedures related to obtaining environmental approvals for sites, ensuring compliance with applicable regulations</li></ul><p>Government DG Surveys &amp; Documentation:</p><ul><li>Manage and follow up on Diesel Generator (DG) survey documentation with government entities and internal clusters.</li><li>Ensure timely submission and tracking of approvals and reports related to DG usage and compliance.</li></ul><p>Procurement &amp; RFQ/RFP Handling:</p><ul><li>Prepare required paperwork (PPWK) at Fuel Product Distribution Government offices in accordance with fuel supply protocols.</li><li>Also Security needs for the Sites and the Buildings that gets handled from the region.</li><li>Ensure all fuel documentation is aligned with internal and government requirements.</li></ul><p>Reporting Management:</p><ul><li>Prepare and upload regular reports related to fuel usage, provisions, monthly expenses, and Fuel Management Data (FMD).</li><li>Maintain accuracy and timely submission of GFS and fuel reports to ensure transparency and budget tracking.</li><li>Prepare power trespassing, theft cases monthly reports.</li></ul><p>Invoice Verification &amp; Coordination:</p><ul><li>Review, verify, and coordinate fuel, safety, and security invoices in collaboration with clusters and vendors.</li><li>Liaise with government bodies to meet compliance standards and project timelines.</li><li>Coordinate with internal departments and vendors to ensure accurate and timely approvals and submissions.</li><li>Process and validate General Ledger (GL &amp; LDG) invoices from outsourced contractors.</li></ul><p>Site Utility and Financial Management:</p><ul><li>Manage and process annual financial obligations for sites, including electricity (ELC), LDG, and water bills.</li><li>Close NGP accounts for dismantled sites and ensure proper financial and regulatory closure procedures are followed.</li></ul><p>Regional Procurement &amp; Reporting:</p><ul><li>Raise PRs for regional operational needs and maintain up-to-date procurement reports.</li><li>Support the preparation of periodic financial and operational reports for management oversight.</li></ul><p>Site contract renewal:</p><ul><li>Obtaining approvals for the result of negotiation achieved by cluster team,</li><li>Obtaining approval for adding, removing sites and buildings to/from security outsource lists.</li></ul><p>Important Clarification</p><p>The allocation and distribution of the activities and responsibilities outlined above shall be carried out through coordination between the Supervisor and the Senior Manager. Both parties share responsibility for ensuring these tasks are assigned appropriately to meet operational requirements.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Diploma Or Bachelor s degree</li><li>Experience 2,4 years</li><li>Motivation for improving and empowering others</li><li>Problem solving and decision-making abilities</li><li>Promoting Teamwork to demonstrate interest, skills, and success</li><li>Computer skill Word, excel, outlook &amp; Power Point</li><li>Language skills English &amp; Arabic Speaking &amp; Writing</li><li>Stakeholder &amp; Government Coordination Skills</li></ul><p>Behavioural Competencies:</p><ul><li>Delivering Results &amp; Fostering Ownership</li><li>Building Customer Value</li><li>Networking &amp; Influencing Collaboratively</li><li>Leading Teams</li><li>Shaping Strategy</li><li>Driving Change</li></ul><p>Technical Competencies:</p><ul><li>Business Case Development</li><li>Technical Writing and Reporting</li><li>Fuel Management</li><li>Problem Solving</li><li>Negotiation</li><li>Local Language Knowledge</li><li>Government Relations</li><li>Mechanical, Electrical &amp; Plumbing Knowledge</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> ***This position will be physically located in Iraq in support of LOGCAP.*** <p>Under supervision of the Waste Services Manager, the Waste Management Supervisor supervises and coordinates all activities of a Non-Hazardous Waste Management Operation which includes wastewater treatment plant operations and black and gray water collection and disposal. The Supervisors oversees all personnel engaged in operation, maintenance, and repair of all Sewage and Black Water Waste Management activities at a 24 / 7 facility.</p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em>This position description is subject to change at any time as needed to meet the requirements of the program or company.</em> </p> <ul> <li>Directs activities of workers engaged in tasks such as black and gray water collection, and dust abatement.</li> <li>Assists workers in repairing facilities and equipment, applying general knowledge of wastewater collection and disposal safety procedures, and using hand tools.</li> <li>Maintains personnel records.</li> <li>Trains workers in performance of duties and safety procedures.</li> <li>Inspects facilities and other equipment to detect need for maintenance and repair.</li> <li>Performs other duties as described.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications: Education/Certifications:</strong> One year related experience may be substituted for one year of education, if degree is required.<br> <ul> <li>Must be a U.S. Citizen</li> <li>High school diploma or equivalent required. Undergraduate degree preferred.</li> <li>Must obtain or have equivalent Waste-Water Treatment Certificate, Certification and/or License</li> </ul> </li> <li> <strong>Experience:</strong> <ul> <li>Five (5) years related experience in Municipal Waste Management working at a Sewer Treatment facility.</li> </ul> </li> <li> <strong>Additional requirements:</strong> <ul> <li>Strong organization, communication (verbal/written) skills, and attention to detail.</li> <li>Requires extensive knowledge of Microsoft Office (Word, Visio, PowerPoint, Outlook, and Excel).</li> <li>Prior LOGCAP experience at a Foreman or Lead level in Non-Hazardous Solid Waste Management (Sewage and Black Water Waste Operations)</li> </ul> </li> <li> <strong>Skills</strong> <ul> <li>Strong organization, communication (verbal/written) skills, and attention to detail.</li> <li>Requires extensive knowledge of Microsoft Office (Word, Visio, PowerPoint, Outlook, and Excel).</li> <li>Prior LOGCAP experience at a Foreman or Lead level in Non-Hazardous Solid Waste Management (Black Water Waste Operations).</li> </ul> </li> <li> <strong>Supervisory Responsibilities</strong> <ul> <li>Supervises operations of Waste Management employees and activities</li> </ul> </li> <li> <strong>Working Conditions:</strong> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <ul> <li>Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects.</li> <li>Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Introduction Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration This Vacancy Notice is part of IOM s competitive mobility exercise, open for applications from internal and internal-equivalent candidates only. Organizational Context and Scope Following the end of hostilities against Islamic State in Iraq and Syria (ISIS), the return of millions of Iraqis is threatened by the lack of livelihoods, widespread destruction and the presence of uncleared debris, heavy damage to critical public infrastructure and destroyed shelter. The situation is further complicated by a fluid and complex security environment. The Transition and Recovery Division (TRD) within International Organization for Migration (IOM) Iraq works to remove the initial obstacles to Internally Displaced Persons (IDPs) return in Iraq s post-conflict areas and lay the foundation for longer-term recovery, economic development and reconstruction in general. Under the overall supervision of the Head, TRD in Baghdad, the direct supervision of the Senior Operations Coordinator (Return &amp; Recovery) in Erbil` and in coordination with relevant units in IOM Iraq, the Programme Officer (Cash Based Interventions (CBI)) will have the overall responsibility for the development and maintenance of IOM Iraq's cash-based assistance systems and portfolio. Advise the technical units, Regional Coordinators and divisions on integrating CBIs into operational plans and strategies to efficiently meet programme objectives, liaising with technical sectors. Establish and maintain a network of strategic partnerships (e.g. Government agencies, United Nations (UN) partners, international non-governmental organizations (INGOs), research institutions, private sector entities) to ensure complementarity in the assessment, design and implementation of CBIs. Use this information to help select and design optimal solutions for IOM Case Based Interventions. Overall day to day oversight and management of all cash and voucher transfers planned under IOM operations in Iraq, including facilitating implementation and monitoring of CBI based programmes at the Area/Sub-Office level. Liaise closely with other IOM division at the Country office (CO) level who have direct responsibilities for elements of the operational management of CBI delivery to beneficiary level e.g. logistics, Finance, Procurement and Information Technology (IT). Advise supervisor of any bottlenecks that may impede the timely delivery of CBI to beneficiaries and take action to resolve problems. Facilitate and support communication and discussions, and ensure an adequate level of coordination, between relevant IOM CO divisions, and financial service providers, who may be contractually engaged for the management and delivery of CBIs to beneficiaries, and review any contractual arrangements made. Liaise closely with relevant government authorities, UN agencies and non-governmental organizations (NGOs) engaged in CBI activities, keeping them fully informed of the status of IOM activities in this regard. Participate in national level dialogue and technical coordination forums with donors and other stakeholders on cash, vouchers and other CBIs. Periodically review the appropriateness for CBI responses in accordance with the current concept of operations for IOM CBI, specifically for transition and recovery activities. Choices of transfer modality for any intervention, including business support packages, training allowances, student transportation, etc. need to be fully justified on the basis of overall cost-effectiveness. Draw up plans for timely delivery of CBIs in coordination with government, NGO and UN partners, donors, and commercially contracted companies, and monitor their implementation. Closely coordinate with the M&amp;E section within the Unit and the M&amp;E Unit of the CO, to ensure that relevant output and outcome indicators for CBI are systematically being collected and analysed in a manner that will help the CO determine efficiency and effectiveness of CBI delivery as well as the appropriateness of the transfer modality choice. Undertake visits to view project sites and meet beneficiaries in order to ensure that progress is made in the achievement of project objectives. Advise IOM CO, Area/Sub-Offices and IOM partners on risk management for CBI based programme implementation. Ensure, in coordination with other operational IOM units, adherence of Government, NGO, and commercial partners to all operational and reporting obligations as stipulated in any Letters of Agreement or contracts and that reports required for IOM are accurate and provided as scheduled. Prepare periodic and ad hoc reports on IOM s CBI based activities in Iraq, including proposals for operational improvements and potential scope for IOM s CBI programming. Ensure compliance with IOM s policies and procedures for CBI based programming. Supervise other programme staff involved in the planning and management of CBI transfers and provide training and technical guidance in their work. Perform such other related duties as may be assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><h2>Required Qualifications and Experience</h2><ul><li>Master's degree in Economics, Social Sciences, Political Science or a related field from an accredited academic institution with five years of relevant professional experience; or, University degree in the above fields with seven years of relevant professional experience.</li></ul><h2>Experience</h2><ul><li>Experience working in the field, with at least three years of international experience in programming in Cash Based Interventions;</li><li>Experience with sectoral CBIs (shelter, health, nutrition, food security, WASH, livelihoods, education, etc.); and,</li><li>Experience in liaising with governmental authorities, other national/international institutions and NGOs and building effective partnerships with private sector.</li></ul><h2>Skills</h2><ul><li>Excellent knowledge of CBIs in humanitarian emergencies and/or early recovery contexts, throughout the project cycle;</li><li>Knowledge and understanding of key developments and actors within the humanitarian area;</li><li>Work experience in the Middle East and Northern Africa region advantageous; and,</li><li>Proven ability to supervise, train and direct staff and operations in transitional contexts.</li></ul><h2>Languages</h2><ul><li>For this position, fluency in English is required (oral and written).</li><li>Working knowledge of Arabic and another official UN language (Chinese, French, Russian, and Spanish) is an advantage.</li><li>Proficiency of language(s) required will be specifically evaluated during the selection process, which may include written and/or oral assessments.</li></ul><h2>Required Competencies</h2><ul><li>IOM s competency framework can be found at this link .</li><li>Competencies will be assessed during the selection process.</li></ul><h2>Values</h2><ul><li>- all IOM staff members must abide by and demonstrate these five values:</li><li>Inclusion and respect for diversity : Respects and promotes individual and cultural differences. Encourages diversity and inclusion.</li><li>Integrity and transparency : Maintains high ethical standards and acts in a manner consistent with organizational principles/rules and standards of conduct.</li><li>Professionalism : Demonstrates ability to work in a composed, competent and committed manner and exercises careful judgment in meeting day-to-day challenges.</li><li>Courage : Demonstrates willingness to take a stand on issues of importance.</li><li>Empathy : Shows compassion for others, makes people feel safe, respected and fairly treated.</li></ul><h2>Core Competencies behavioural indicators Level 2</h2><ul><li>Teamwork : Develops and promotes effective collaboration within and across units to achieve shared goals and optimize results.</li><li>Delivering results : Produces and delivers quality results in a service-oriented and timely manner. Is action oriented and committed to achieving agreed outcomes.</li><li>Managing and sharing knowledge : Continuously seeks to learn, share knowledge and innovate.</li><li>Accountability : Takes ownership for achieving the Organization s priorities and assumes responsibility for own actions and delegated work.</li><li>Communication : Encourages and contributes to clear and open communication. Explains complex matters in an informative, inspiring and motivational way.</li></ul><h2>Managerial Competencies behavioural indicators Level 2</h2><ul><li>Leadership : Provides a clear sense of direction, leads by example and demonstrates the ability to carry out the Organization s vision. Assists others to realize and develop their leadership and professional potential.</li><li>Empowering others : Creates an enabling environment where staff can contribute their best and develop their potential.</li><li>Building Trust : Promotes shared values and creates an atmosphere of trust and honesty.</li><li>Strategic thinking and vision : Works strategically to realize the Organization s goals and communicates a clear strategic direction.</li><li>Humility : Leads with humility and shows openness to acknowledging own shortcomings.</li></ul><p></p></section>

<p>Main Duties and Responsibilities:</p><ul><li>Leader of the wellsite team with overall responsibility for conducting well operations in a safe and efficient manner</li><li>Identifies high-risk situations, documents them, and adopts a risk mitigation approach</li><li>Participates in HSE and non-conformance event investigations and reporting as required</li><li>Focal point on location for emergency response</li><li>Ensuring all well intervention personnel carry out their activities in accordance with HSE standards and expectations</li><li>Monitoring compliance with all statutory and company standards and procedures.</li><li>Auditing both the activity and management systems of all completion and well intervention service providers.</li><li>Ensuring maintenance of all completion and well intervention equipment in accordance with the technical integrity standards and auditing for compliance with legislative requirements.</li><li>Provide input to well design, intervention programmes, and operations and logistics planning.</li><li>Coordinate well operations with contractors on site to ensure compliance with the approved well programs in line with the company's procedures</li><li>Ensures well control event preparedness</li><li>Supervising the safe and efficient implementation of all well intervention programmes.</li><li>Monitoring all well site personnel and materials movements to ensure that there are no delays to programme.</li></ul><p>Reporting and Liaison</p><ul><li>Ensuring accurate and timely reporting of all completion rig and well intervention site activities</li><li>On-site well services and service company monitoring and first-level cost control/approval.</li><li>Perform contractor audits/oversights to ensure service providers are working to their own standards (SOPs).</li><li>Well-site incident reporting and investigation.</li><li>Liaison between the rig/well site team and office-based groups.</li><li>Capture and reporting of lessons learned, after action reviews and end of well reports.</li></ul><p>Team Building and Personnel</p><ul><li>Developing team building across the entire team in order to create and promote a culture of openness, involvement and participation</li><li>The incumbent will be responsible for coaching/training local staff in equivalent positions</li><li>Responsible for checking all equipment and tools on site after delivery to ensure readiness (QA/QC, certifications, and other relevant documentation).</li><li>Assist, when required, the company's Sindy Rig operations (supervision, reporting, etc.)</li><li>Daily calls and communication with the WS Superintendent in town</li><li>Prepares Daily Reports during all WI operations (DWR)</li><li>Prepares Daily Cost Tracker during all well intervention operations (DCR) and other relevant daily reports.</li><li>Documents any failure or incident report within 24 hours (in Beacon where access is possible)</li><li>Discusses program changes with the WS team, being proactive in improvement suggestions</li><li>Initiates the Management of Change (MOC) process when required and communicates the issue to the WS Superintendent.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum of 10 years' experience, including workovers and well intervention operations at the supervisory level.</p><p>Preferably have a degree in Petroleum Engineering or a similar technical or scientific discipline.</p><p>PC Literate - working knowledge of MS Word, Excel, and Outlook.</p><p>Must be able to work with a team, take directions from WS Superintendent(s), and focus on attention to detail.</p><p>Must be self-motivated and capable of working with limited direct supervision.</p><p>Must be capable of completing and tracking multiple tasks simultaneously.</p><p>Must have a track record of recent experience as a Workover, Completions and Well Intervention Supervisor.</p><p>He / She must have a good understanding of best industry practice on supervising well integrity during completions, workover and rigless operations.</p><p>High H2S environment.</p><p>Level 4 IWCF certification: wireline, coiled tubing &amp; completions.</p><p>Fluent in English.</p><p>Have experience integrating technical work on multi-discipline projects.</p><p>Ability to work effectively with others. Strong HSE leadership.</p><p>Good communication skills.</p><p>Can work in a multi-cultural environment.</p><p>Demonstrates commitment to HSSE policy and statement and knows and understands expectations as detailed in the HSSE Management System.</p><p>Develops highly positive relationships with both field and office teams.</p><p>Looks beyond the obvious in problem solving.</p><p>Provides support to WS Superintendent when required on technical matters.</p><p>Ensures cost-effective use of services and equipment.</p><p>Maintains a strong focus on progress towards achievement of objectives.</p><p>Demonstrates a high level of competence in leading others.</p><p>Working Conditions:</p><p>Field-based, 14 days ON / 14 days OFF.</p><p>Only qualified candidates will be contacted.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Carpenter Manager, the Carpenter Supervisor supervise a team which constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools, and conforming to building codes. Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Supervise a team which constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools, and conforming to building codes. + Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated. + Perform other duties as required Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Education: High school diploma or equivalent. Must provide a copy of the diploma. + Must be a U.S. Citizen + Must be able to obtain Host Country Passenger Vehicle license + Experience: + Minimum of Four (8) years of progressive experience in specified and related field. Evidence of completion of trade school and/or a minimum of Four (4) years of apprenticeship training preferred. + Skills: + Ability to supervise employees effectively, work under pressure, strict timelines and regulations + Analytical skills to be able to solve work-related problems. + Manual dexterity for installing material, and equipment, to meet specifications. + Must have proficient communication skills in English both written and oral. + Requires a collaborative work style, fostering cooperation, and teamwork. + Must exercise discretion and good sound judgment. + Must have basic computer skills. + Must have a thorough understanding of IBC Civil / Carpentry Standards + Supervisory Requirements: + Supervises a team of carpenters/construction workers. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Technology Development Associate<br><br><p><b>"</b>Belong, Connect, Grow, with KBR!</p><br><br><br><p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p><br><br><p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</p><br><br><br><p>KBR IFMS — MAJNOON OIL FIELD</p><br><br>Technology Development Associate<p><i>Job Description</i></p><br><br><p><b>Entry-Level | Iraqi Nationals | Majnoon Oil Field, Basrah</b></p><br><br><br>Role Details<p><b>Job Title: </b>Technology Development Associate</p><br><br><p><b>Department: </b>Information Technology</p><br><br><p><b>Location: </b>Majnoon Oil Field, Basrah, Iraq</p><br><br><p><b>Eligibility: </b>Iraqi Nationals only</p><br><br><p><b>Work pattern: </b>5/2 daily commuter</p><br><br><p><b>Reports to: </b>Technology Development Supervisor</p><br><br><br>About the Role<p>KBR is seeking motivated Iraqi national graduates to join the IFMS project at Majnoon Oil Field as Technology Development Associates. This is an entry-level position that provides a structured development pathway into the disciplines of Information Management (IM), Information Technology (IT), Digital Solutions, Cyber Security, Applications, Data Management, Operational Technology, and SAP.</p><br><br><p>The role is designed for early-career graduates who demonstrate strong potential, a willingness to learn, and a commitment to building a long-term career in the oil and gas sector. You will follow a customized development plan combining formal training, on-the-job experience, mentoring, and practical project assignments, with the aim of progressing into specialist or technical roles upon successful completion of the program.</p><br><br><br><br><br>Key Responsibilities<ul><li>Participate in a structured graduate development and rotational training program across relevant technology disciplines</li><li>Support daily activities within assigned teams including IM, IT, Cyber Security, Digital Solutions, SAP, Data Management, and Operational Technology</li><li>Assist experienced professionals with project, operational, and end-user support activities</li><li>Complete assigned technical, business, and professional development courses</li><li>Contribute to data collection, analysis, reporting, and documentation tasks</li><li>Participate in workshops, mentoring sessions, and knowledge-sharing activities</li><li>Support technology adoption, user engagement, and continuous improvement initiatives</li><li>Develop an understanding of oil and gas business processes and the technologies that support them</li><li>Demonstrate commitment to HSE standards, company policies, and professional conduct at all times</li></ul><br>What We Are Looking For<p>We are recruiting on potential, not experience. The following attributes define the candidate we want:</p><br><br><br><ul><li>Strong written and verbal communication skills in English</li><li>Positive, professional attitude with high levels of motivation and enthusiasm</li><li>Intellectual curiosity and a genuine desire to learn</li><li>Strong interpersonal and teamwork capabilities</li><li>Good organizational and time management skills</li><li>Ability to adapt to changing priorities in a dynamic field environment</li><li>Commitment to personal growth and continuous professional development</li><li>Desire to build a long-term career within Iraq's energy sector</li></ul><br>Qualifications &amp; Requirements<p><b>Education</b></p><br><br><ul><li>Bachelor's Degree from an accredited institution — recent graduates encouraged to apply</li><li>Relevant disciplines include: Information Technology, Computer Science, Information Systems, Engineering, Data Science, Business Information Systems, Electronics, Telecommunications, Cyber Security, or Business English / Communications</li></ul><p><b>Language</b></p><br><br><ul><li>English: Good written and verbal communication required</li><li>Arabic: Native</li></ul><p><b>Technical Skills</b></p><br><br><ul><li>Basic familiarity with Microsoft Office 365, computer hardware/software, and digital tools</li><li>General awareness of IT, data, or cyber security concepts is advantageous — training will be provided</li></ul><p><b>Advantageous Certifications (not mandatory)</b></p><br><br><ul><li>Microsoft Fundamentals, ITIL Foundation, Cisco Networking Fundamentals, Cyber Security Fundamentals, Cloud Fundamentals (Azure / AWS), Data Analytics Fundamentals, or any recognized technology certification</li></ul><br>Career Development<p>Upon successful completion of the program, associates may progress into specialist roles such as IT Support Specialist, Information Management Specialist, SAP Support Analyst, Cyber Security Analyst, Digital Solutions Coordinator, Data Analyst, Infrastructure Support Engineer, or Applications Support Analyst — aligned to individual aptitude and business requirements.</p><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Balad, Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. The Power Generation Supervisor is responsible for supervising the power generation shop and personnel in support of Operations and Maintenance (O&amp;M) and Construction. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Supervise and train skilled, semi-skilled, and apprentice personnel to ensure the safe and efficient execution of assigned work involving installation, operation, removal, maintenance, and repair of all power generation equipment + Review service orders and work orders related to power generation and ensure they are completed on time, staffed properly, and the quality of work meets approved standards + Estimate amount of work hours, materials, parts, and supplies needed + Maintain database of all power generation activities and keep records of materials, parts, tools, and supplies received, used, and in stock + Schedule and coordinate power generation “switching” and “shut-downs” with appropriate trades and government personnel + Secure the cooperation of other trades supervisors and instill within assigned employees the cooperative attitude necessary for working closely with other O&amp;M and construction trade workers + Perform load calculations in order to properly size power generators for various types of facilities + Perform other duties as assigned Qualifications + Minimum Qualifications: Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. + High School Diploma or equivalent + Valid Driver’s License + Graduate of an accredited diesel school preferred + US military training in power generation, diesel, and electrical job fields preferred + Experience: + Minimum eight (8) years of experience in repairing and replacing diesel/mechanical engines and generators + Skills: + Basic understanding of principles of electricity and a variety of engines, power generation, electrical safety, and engine maintenance + Ability to perform an extended load test and use electrical math formulas to meet specifications of a proper load test + Understand voltage, amperage, frequency, and poser factors + In-depth knowledge and ability to perform maintenance on power generation equipment to include engine, Alternating Current (AC) alternators, electronic controls, electrical wiring, and accessories + Skill in load testing, all calculations that must be done, and safety measures. + Supervisory Responsibilities: + Manages Power Generation department. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Must be able to lift 25lbs continuously and 50lbs intermittently. Must be able to work overhead with arms raised for extended periods. Required to observe all safety and health requirements for office environment. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li><li>May be expected to work in austere environments and all-weather conditions.</li></ul>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p>• Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>• Service and lubricate aircraft and subsystems.</p><p>• Safely prepare aircraft for inspections and maintenance checks and services.</p><p>• Perform scheduled inspections and assist in performing special inspections.</p><p>• Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>• Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p><p>• Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>• Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>• Participate in maintenance test flights and operation checks as required.</p><p>• Perform other duties as requested.</p><p><strong>Knowledge &amp; Skills</strong></p><p>• Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>• Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>• Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>• Working knowledge of technical publications and Logistics Information Systems.</p><p>• Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>• Participate in maintenance test flights and operation checks as required.</p><p>• Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>• The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p><strong>Physical Requirements/Working Environment</strong></p><p>• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>• Must be able to climb stairs, ramps, ladders, and work stands.</p><p>• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>• May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>• Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>• Will handle dirty parts and lubricants.</p><p>• Will be required to wear proper Personal Protective Equipment (PPE).</p><p>• Must be able to pass a Respirator Physical and Fit Test</p><p>• May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>• Must be able to lift/push/pull minimum of 50 pounds.</p><p>• May work in maintenance shop or outside.</p><p>• Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>• May be exposed to extreme noise from operating equipment.</p><p>• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>• May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements:</p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60.</li><li>OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job Description</h4> <p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneuhydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p> <p>Service and lubricate aircraft and subsystems.</p> <p>Safely prepare aircraft for inspections and maintenance checks and services.</p> <p>Perform scheduled inspections and assist in performing special inspections.</p> <p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p> <p>Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.</p> <p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p> <p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p> <p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p> <p>Participate in maintenance test flights and operation checks as required.</p> <p>Perform other duties as requested.</p> <h4>Minimum Requirements</h4> <ul> <li>High school diploma or equivalent required.</li> <li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li> <li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li> <li>Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.</li> <li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.</li> <li>Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).</li> <li>Must be able to obtain Iraq visa.</li> </ul> <h4>Knowledge & Skills</h4> <ul> <li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li> <li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li> <li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li> <li>Working knowledge of technical publications and logistics information systems.</li> <li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li> <li>Participate in maintenance test flights and operation checks as required.</li> <li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li> <li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li> </ul> <h4>Physical Requirements / Working Environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to climb stairs, ramps, ladders, and work stands.</li> <li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li> <li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li> <li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li> <li>Will handle dirty parts and lubricants.</li> <li>Will be required to wear proper personal protective equipment (PPE).</li> <li>Must be able to pass a respirator physical and fit test.</li> <li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all-weather conditions.</li> </ul></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Carpenter Manager, the Carpenter Supervisor supervise a team which constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools, and conforming to building codes. Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Supervise a team which constructs, erects, installs, and repairs structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools, and conforming to building codes. + Studies blueprints, sketches, or building plans for information pertaining to type of material required, such as lumber or fiberboard, and dimensions of structure or fixture to be fabricated. + Perform other duties as required Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Education: High school diploma or equivalent. Must provide a copy of the diploma. + Must be a U.S. Citizen + Must be able to obtain Host Country Passenger Vehicle license + Experience: + Minimum of 5 - 10 Years in the construction Industry, with at least 3 Years in Supervisory or Leadership role experience managing carpentry crews, coordinating with subcontractors, and overseeing material deliveries is essential. + Evidence of completion of trade school and/or a minimum of Four (4) years of apprenticeship training preferred. + Proven ability to handle Quality Control, Safety Compliance, and budget Management. + Skills: + Ability to supervise employees effectively, work under pressure, strict timelines and regulations + Analytical skills to be able to solve work-related problems. + Manual dexterity for installing material, and equipment, to meet specifications. + Must have proficient communication skills in English both written and oral. + Requires a collaborative work style, fostering cooperation, and teamwork. + Must exercise discretion and good sound judgment. + Must have basic computer skills. + Must have a thorough understanding of IBC Civil / Carpentry Standards + Supervisory Requirements: + Supervises a team of carpenters/construction workers. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Medium work. Exerting up to 50 pounds of force occasionally, and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p><h4>Purpose and scope:</h4> <p>Supervise the maintenance cycle to ensure satisfactory completion of the program objectives.</p> <h4>Essential responsibilities:</h4> <ul> <li>Supervise all maintenance operations for assigned equipment in accordance with applicable PWS, company policies, OSHA, DOT, ANSI, ASME and applicable military regulations.</li> <li>Supervise shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training.</li> <li>Establish job priorities and estimate down time.</li> <li>Coordinate workflow for downed equipment waiting for parts to minimize backlog of work and cost to customer division.</li> <li>Provide direct support to internal and external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures.</li> <li>Supervise the recovery operations of MHE, VE, CE, heavy and light vehicle maintenance throughout assigned area of operation.</li> <li>Coordinate the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation.</li> <li>Provide input to management for forecasting and monitoring of the stock levels for required service and repair parts and petroleum.</li> <li>Responsible for the accurate and timely submission of all required plans and reports.</li> <li>Maintain effective lines of formal and informal communication amongst all levels of management and the customer as required.</li> <li>Coordinate collection and preparation of activity reports.</li> <li>Supervise and coordinate all maintenance activities required per the preventive maintenance program.</li> <li>Provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees.</li> <li>Act as the point of contact for all maintenance issues in the absence of the Maintenance Manager.</li> <li>Monitor team development and ensure the execution of performance evaluations in accordance with DI policy.</li> <li>Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum position knowledge, skills, and abilities required:</h4> <ul> <li>Associate's degree in an associated discipline.</li> <li>Two years of experience in related field can be substituted for each year of college.</li> <li>Six to eight years of logistics experience in a military or tactical environment.</li> <li>Prefer at least three years in a maintenance supervisor environment.</li> <li>Understanding of organizational maintenance and supply concepts and procedures.</li> <li>Understanding of maintenance production, production control and knowledge of U.S. Army maintenance support systems.</li> <li>Knowledge of MHE, heavy truck and/or heavy equipment.</li> <li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions.</li> <li>Must possess knowledge of DOT, OSHA, ANSI, ASME, military regulations, standards and OEM requirements.</li> <li>Knowledge of diagnostics and ability to conduct technical research.</li> <li>Strong understanding of Department of Defense contracting policies and procedures.</li> <li>Outstanding problem solving skills and sound judgment.</li> <li>Excellent writing, communication, leadership and interpersonal skills.</li> <li>Demonstrative proficiency in Microsoft applications.</li> <li>Must be able to meet deployment status requirements.</li> </ul> <h4>Work environment, physical demands, and mental demands:</h4> <ul> <li>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull.</li> <li>Ability to lift and carry up to fifty pounds.</li> <li>Assist in lifting up to one hundred pounds.</li> <li>Able to work in both inside and outside conditions.</li> <li>Be exposed to dust, fumes and gases from running engines and motors.</li> <li>Living and working conditions at the assignment location could be remote and uncomfortable.</li> <li>Long hours, exposure to weather and hazardous conditions.</li> <li>Personnel should be aware of moving on short notice and under adverse conditions.</li> <li>Ability to travel domestically and internationally.</li> </ul> <h4>Other responsibilities:</h4> <ul> <li><strong>Safety:</strong> Enforce a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid and buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</li> <li><strong>Quality:</strong> Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Quality Policy and carry out job activities in compliance with applicable Quality System documents and customer contracts. Each employee must read and understand his or her Quality Management and Customer Satisfaction responsibilities.</li> <li><strong>Procedure compliance:</strong> Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his or her job.</li> </ul></p><p></p>

<p>Supervise the Maintenance cycle to ensure satisfactory completion of the program objectives.</p><p>Supervises all maintenance operations for assigned equipment in accordance with applicable PWS, Company policies, OSHA, DOT, ANSI, ASME and applicable military regulations.</p><p>Supervises shop foreman and mechanics to include vacation planning, discipline, conducting performance evaluations, and training.</p><p>Establishes job priorities and estimates down time.</p><p>Coordinates work flow for downed equipment waiting for parts to minimize backlog of work and cost to customer division.</p><p>Provides direct support to internal/external customers to ensure compliance, tracking efficiency, burn rates, equipment usage and maximizing cost avoidance measures.</p><p>Supervises the recovery operations of MHE, VE, CE, Heavy and Light vehicle maintenance throughout assigned area of operation.</p><p>Coordinates the proper administration, maintenance and distribution of approved publications, warranty documentation, and LDD and ECOD documentation.</p><p>Provides input to management for forecasting and monitoring of the stock levels for required service/repair parts and petroleum.</p><p>Responsible for the accurate and timely submission of all required plans and reports.</p><p>Maintains effective lines of formal and informal communication amongst all levels of management (and the customer) as required.</p><p>Coordinates collection and preparation of activity reports.</p><p>Supervise and coordinate all maintenance activities required per the preventive maintenance program.</p><p>Responsible to provide for and enforce guidelines to ensure the health, safety, and welfare of all assigned employees.</p><p>Acts as the POC for all maintenance issues in the absence of the Maintenance Manager.</p><p>Monitors team development and ensures the execution of performance evaluations in accordance with DI policy.</p><p>Conduct site visits to establish professional relationships with maintenance teams, site personnel, and the customer as needed.</p><p>Perform all other position related duties as assigned or requested.</p><p>Ability to stand, sit, walk, stoop, squat, crouch, kneel, push and pull</p><p>Ability to lift and carry up to fifty (50) pounds</p><p>Assist in lifting up to one hundred (100) pounds</p><p>Able to work in both inside and outside conditions</p><p>Be exposed to dust, fumes and gases from running engines and motors</p><p>Living and working conditions at the assignment location could be remote and uncomfortable</p><p>Long hours, exposure to weather and hazardous conditions</p><p>Personnel should be aware of moving on short notice and under adverse conditions</p><p>Ability to travel domestically and internationally</p><p>Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams.</p><p>Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p><p>Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Associate's degree in an associated discipline</li><li>Two (2) years of experience in related field can be substituted for each year of college</li><li>Six (6) to eight (8) years of logistics experience in a military/tactical environment</li><li>Prefer at least three (3) years in a maintenance supervisor environment</li><li>Understanding of organizational maintenance and supply concepts and procedures</li><li>Understanding of maintenance production, production control and knowledge of U.S Army maintenance support systems</li><li>Knowledge of MHE, heavy truck and or heavy equipment</li><li>Knowledge of equipment parts acquisition, warranty, LDD, and ECOD submissions</li><li>Must possess knowledge of DOT, OSHA, ANSI, ASME, Military regulations standards and OEM requirements</li><li>Knowledge of diagnostics and ability to conduct technical research</li><li>Strong understanding of Department of Defense contracting policies and procedures</li><li>Outstanding problem solving skills and sound judgment</li><li>Excellent writing, communication, leadership and interpersonal skills</li><li>Demonstrative proficiency in Microsoft application</li><li>Must be able to meet deployment status requirements</li></ul>

<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p>Knowledge &amp; Skills Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts. Broad knowledge of aircraft sheet metal/structural modifications and repair. Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers. Working knowledge of technical publications and Logistics Information Systems. Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks. Participate in maintenance test flights and operation checks as required. Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics. The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p>Physical Requirements/Working Environment Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift heavy objects whose weight may exceed 50 pounds. Must be able to type using a standard keyboard to communicate through e-mail and various software applications. Will handle dirty parts and lubricants. Will be required to wear proper Personal Protective Equipment (PPE). Must be able to pass a Respirator Physical and Fit Test May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc. Must be able to lift/push/pull minimum of 50 pounds. May work in maintenance shop or outside. Must be able to work in a shop where the environment is drafty, noisy, and dirty. May be exposed to extreme noise from operating equipment. May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles. May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&amp;P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>

<p><h4>Job description</h4> <p>The UH-60 aircraft mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneumatic and hydraulic systems, engines, auxiliary power unit, and ventilation and heating systems.</p> <p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.<br> Service and lubricate aircraft and subsystems.<br> Safely prepare aircraft for inspections and maintenance checks and services.<br> Perform scheduled inspections and assist in performing special inspections.<br> Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.<br> Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.<br> Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.<br> Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.<br> Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.<br> Participate in maintenance test flights and operation checks as required.<br> Perform other duties as requested.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent required.<br> Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.<br> U.S. military technical school or specialized training course is desired; certification of education level is required.<br> Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.<br> Must be able to obtain and maintain facility public trust NAC-I. <strong>Note: US citizenship is required for facility public trust NAC-I at this work location.</strong><br> Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).<br> Must be able to obtain Iraq visa.</p> <h4>Knowledge and skills</h4> <p>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.<br> Broad knowledge of aircraft sheet metal/structural modifications and repair.<br> Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.<br> Working knowledge of technical publications and logistics information systems.<br> Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.<br> Participate in maintenance test flights and operation checks as required.<br> Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.<br> The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p> <h4>Physical requirements / working environment</h4> <p>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.<br> Must be able to climb stairs, ramps, ladders, and work stands.<br> Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee, and reach above/below shoulders.<br> May be required to lift heavy objects whose weight may exceed 50 pounds.<br> Must be able to type using a standard keyboard to communicate through e-mail and various software applications.<br> Will handle dirty parts and lubricants.<br> Will be required to wear proper personal protective equipment (PPE).<br> Must be able to pass a respirator physical and fit test.<br> May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.<br> Must be able to lift/push/pull minimum of 50 pounds.<br> May work in maintenance shop or outside.<br> Must be able to work in a shop where the environment is drafty, noisy, and dirty.<br> May be exposed to extreme noise from operating equipment.<br> May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.<br> May be expected to work in austere environments and all-weather conditions.</p></p><p></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview This position is physically located in Balad, Iraq Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Under the supervision of the Operations Supervisor, the Operations Coordinator, Sr. is responsible for program operational excellence in support of Senior Management of the Americas Programs (AP) business area team and program managers, by ensuring adherence to common work processes and procedures and providing other management assistance. Will be responsible for supporting operations across the business area, reviewing/delivering monthly reports and dashboards, program phase-in participation, participate with proposal Contingency Operations development, support the overall organization by supporting program teams with the development and implementation of common work processes and procedures, program execution planning and providing other management oversight. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company + Responsible for the oversight of and operational interface with assigned individual programs in accordance with the established Vectrus and government policies, procedures, systems, and requirements to include P&amp;L responsibility and operational excellence. + Mentoring and professional development oversight of subordinate program managers and key program staff as well as succession planning. + Participates in and supports the business development process, to include milestone reviews, strategy development, and customer interface and capture activities. + Responsibilities include program planning, start-up (phase-in) and subcontracting strategy, contract changes, customer daily relations, subcontractor relations and program reporting. + Performs Vectrus enterprise wide horizontal integration planning and interfaces to other functional operations, COEs, VCs, and support systems. + Ensures delivery of and reviews required technical and financial reports to show progress of programs to Vectrus senior management and the customer. + Performs Other Duties as Assigned. Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Undergraduate degree preferred + Must be a U.S. Citizen + Host Country Passenger Vehicle + Experience: + A minimum of five (5) years general experience which provides a good basis or general knowledge of the principles of organization, management, and administration. + Three years leadership experience. + OCN Qualifications &amp; Experience + Undergraduate degree or equivalent + A minimum of five years general experience which provides a good basis or general knowledge of the principles of organization, management, and administration. + Three years leadership experience. + Skills: + Strong organization, communication (verbal/written) skills, and attention to detail. + Requires extensive knowledge of Microsoft Office (Word, Visio, PowerPoint, Outlook, and Excel). + Must be able to multi-task proficiently while meeting short suspense for both scheduled Contract Data Requirements List (CDRL) and unscheduled reports/tasks. + Prior LOGCAP Operations experience preferred. + MAXIMO experience is preferred. + Supervisory/Budget Responsibilities: + Supervises Operations Coordinators/Specialists performing 24hr operations at the Task Order and Site levels. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p><br></p><p><strong>The role</strong></p><p>This is an exciting opportunity for an experienced TAR Supervisor to join our Iraq Business Unit.</p><p><strong>What we can offer</strong></p><ul><li>Meaningful and interesting projects</li><li>Delivered to high profile clients and complex projects in Iraq</li><li>Commitment to Diversity and Inclusion ; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice</li><li>Competitive salary with regular salary reviews to ensure we are rewarding at the right level in line with the market</li><li>Medical Insurance: Ensures inpatient and outpatient medical care is available should you require treatment.</li><li>Commitment to continued professional development; development plans that are tailored to your individual needs and interests</li><li>Global connections : join experts around the world who are at the leading edge of our industry, shaping the standards of our profession</li><li>Long Service Award: Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years services of our employees at 5-year service milestones</li></ul><p><strong>Job Objectives</strong></p><p><strong>Scope of Responsibilities</strong></p><ul><li>Support the TAR Lead with safe and efficient delivery of the TAR program.</li><li>Promote a strong Health, Safety &amp; Environmental culture. Lead by example.</li><li>Ensure Tool Box Talks are structured, recorded &amp; add value.</li><li>Embrace a one team culture.</li><li>Thorough understanding of Turnarounds and Maintenance to provide guidance for field execution of TAR scopes, including all types of fixed equipment.</li><li>Knowledge of pressure vessel repairs is preferable.</li><li>Ability to manage concurrent activities safely &amp; effectively and deconflict SIMOPS.</li><li>Ability to communicate well with other functions, including Maintenance, Inspection, Engineering, Operations, Projects to deliver the plan.</li><li>Work with Operations to develop culture of best practice process isolation, de-pressuring, closed draining, flushing, purging, spading for consistency of safe equipment shutdown preparation &amp; support efficient de-isolation and re-commissioning.</li><li>Ensure vendors with required expertise, spares, products, consumables, scaffolding, vehicular and other enabling logistics are at the worksite when required.</li><li>Manage all aspects of TAR scope from start to finish including mobilisation to and de-mob from worksite.</li><li>Strictly in accordance with; good oilfield practice, ROO engineering standards, safety and quality processes and procedures.</li><li>Drive consistency in TAR preparation process using checklists and other tools to track readiness against agreed milestones.</li><li>Understand Security and Emergency Response rationale and mentor as appropriate.</li><li>Develop TAR execution schedule with Planner for effective delivery.</li><li>Working with procurement, ensure management of spares and materials.</li><li>Prioritise and identify long lead items in advance.</li><li>Management of contractor performance, monitoring and mentoring.</li><li>Detailed daily reporting.</li><li>Clear communication to back to back position through handovers pre / post field breaks.</li><li>Drive continuous improvements in efficiency and cost reduction of TAR delivery.</li></ul><p><strong>Supervisory Responsibility</strong></p><ul><li>Lead on-site team of Contractors</li><li>Site supervision of construction contractors for execution of pre-Tar and TAR activity, to plan</li><li>Safe execution of site activities</li><li>Ensure quality in construction execution</li><li>Input to site execution plan, helping to identify and mitigate any schedule risks</li><li>Identification of pre-TAR works</li><li>Interface between contractors, operations, Basra Oil Company (BOC) for site execution</li><li>Ensure materials availability at the work site in readiness for TAR execution</li><li>Ensure plant and equipment available and set up in readiness for TAR execution</li><li>Input to lessons learned</li></ul><p><strong>Work Contacts</strong></p><ul><li>Operations &amp; Maintenance</li><li>HSE Team</li><li>Contract Supervision</li><li>Project Function</li><li>Engineering</li><li>Integrity / Inspection teams</li><li>Planning Team</li><li>Procurement Coordinator</li></ul><p><strong>Competencies/Knowledge, Skills and Abilities</strong></p><ul><li>Strong safety leadership</li><li>Self-driven, analytical and pragmatic behaviours</li><li>Strong oral and written communication skills</li><li>Planned and organised approach</li><li>Experienced in Turnaround planning and execution</li><li>Knowledge of pressure vessel repairs and repair codes - preferable</li><li>Experienced in all aspects of Static Equipment repair and problem resolution.</li><li>Teamwork orientated</li><li>Working knowledge of local Labour Legislation and Laws is desirable</li></ul><p><strong>Physical Effort and Work Environment</strong></p><p>Duties performed at site with generally harsh climatic conditions.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>5+ years experience in Petrochemical or Oil and Gas maintenance &amp; engineering environment.</li><li>2+ years experience in Turnarounds</li><li>HNC qualification or higher in relevant technical discipline with strong understanding of engineering fundamentals.</li><li>Good knowledge of asset management system (CMMS) - preferable</li><li>Demonstrate a positive attitude and embrace clients charter values.</li><li>Foster good relationships and team working ethic with contractor groups to promote safe working practices and efficiency.</li><li>Experience of working in an integrated team from diverse locations required.</li><li>Experience of Safe Systems of Work.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Directs a professional team encompassing a wide range of functions within the discipline: Interviews, selects and places candidates into open positions within area of responsibility. Evaluates staff, comparing objectives and achievements in the assessment. Coaches employees in their professional career development and process improvements. Issues discipline whenever required. Ensures employees are informed of and use safe work practices. Recommends termination or contract non-renewal when appropriate. Directs a professional team encompassing a range of functions within the F&amp;ES Services Department: Manages the Fire and Emergency Services (F&amp;ES) programs. To support Army operations in camps, ammunition supply point, Army heliport, dormitories, retail facilities, and specialized maintenance facilities. Serves as the primary point of contact to Camp Commanders on Fire Prevention and Emergency Operation issues. Ensures that the commander is aware of fire regulations pertaining to fire protection. Attends, participates, and plays a leadership role in community events in order to enhance the image of the Fire Department. Executes programs for training, fire prevention, fire protection, aircraft fire rescue fighting, and other responsibilities as outlined in the Fire Department's Statement of Work (SOW). Maintains a close working relationship with the agencies responsible for law enforcement and water supply, emergency medical services, among others, in order to operate in an effective and cooperative manner. Develops shift schedules to insure adequate numbers of fire fighters and vehicles are assigned to fire stations supporting Camps. Prepares action plans. Given an emergency incident requiring multiple agency operations, so that the required resources are determined and the assignment and placement of the resources are designated in order to mitigate the incident. Coordinates equipment maintenance and inspections of Fire Stations equipment for operational readiness. Maintains, develops, and provides leadership for Risk Management. Responsible for oversight of the development of the department's strategic master plan. Responds to fire, rescue, hazardous materials and other emergencies assigned to the Fire and Emergency Services for supporting Army operations including but not limited to camps, ammunition supply point, and Army heliport. Directs mutable companies during emergency level operations for structural fires, aircraft fires, rescue operations, medical emergencies, and hazardous materials responses. Shall conduct or assist in Fire Investigations pending proper certifications; as needed. Performs other related tasks as directed</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>High school diploma required. Must provide a copy of the diploma or college transcript Associates degree preferred Must be a U.S. Citizen Must be able to pass annual firefighter Occupational Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583 Clearance Requirements: Must have an active secret clearance. Certification Requirements: Fire Officer III, Fire Inspector II, Fire Instructor II, Airport Firefighter, Driver Operator and HAZMAT Incident Commander Experience: Must have a minimum of five (5) years of experience as a Fire Inspector Must have in-depth knowledge of and experience implementing the NFPA code Must have a minimum of five (5) years experience in a supervisor position Required to have IFSAC or ProBoard Certification Skills: Excellent communication skills, both oral and written. Computer skills including MS-Word, Power Point, Excel and Outlook. Must be able to pass the required medical and physical exams, as applicable. Must be able to use evaluative methods, to analyze data, and to communicate with other departments. Have knowledge of the chemistry of fire, preventive maintenance and operations of firefighting and rescue equipment, physical and chemical properties of combustible materials and building structures and their component systems. Have experience in managing fire prevention and protection plans and programs. Have the knowledge to act for the Deputy Fire Chief during his absence. Must also have experience at management of self-inspection and compliance measurement program Supervisory Responsibilities: Directs and maintains readiness for multiple personnel and apparatuses responding to F&amp;ES emergencies. Working Conditions: Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). Includes some industrial production environment conditions as well. Physical Requirements: Light Medium work. Exerting up to 50pounds of force occasionally, and/or up to 30pounds of force frequently, and/or up to 30 pounds of force constantly to move objects. Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. Must comply with all Fire and Safety Regulations and post policies.</p><p></p></section>