Chemical Engineer Jobs in Iraq

<ul><li>Fundamental of Process Engineering Knowledge such as Hydraulics, Heat Transfer, and Mass Transfer etc.</li><li>Knowledge of Process Chemistry, Trouble Shooting, Equipment Performance Evaluation, Analysis of Process Problems</li><li>Review of Project Documents such as FEED, PFD, P&ID and Process Design Package</li><li>Very Good Knowledge of Technical Writing</li><li>Computer Skill such as MS Office</li><li>Knowledge of Process Simulation Software such as Hysis, HTRI, Flare Net etc.</li><li>Fluent in English.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Education: Minimum B.S. in Chemical Engineer.</p><p>Years of Experience: Minimum 8 years in Oil and Gas Industry</p><p>Nature of Experience: Process Engineering in Oil Refinery with special focus on Distillation and Catalytic Process Areas such as Hydrotreating, Semi Regenerative Reformer, Isomerization Process. and Sweetening Process such as Naphtha and Kerosene Merox.</p>

<p>Requirements &amp; Summary</p><ul><li>Skills : Process Management , Process Engineer</li><li>Other Skills : Process Safety Engineer, Safety Engineer, QAR, RAM, FEED, detailed design, safety-critical systems, process safety and risk management</li><li>Experience : 20 + Years</li><li>Education : Bachelors/3-5 yr Degree</li><li>Employment Type : Full Time Salaried Employee</li><li>Location : Iraq, Iraq</li></ul><p>Qualifications and Experience</p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li></ul><p>Competencies:</p><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul><p>The Senior Process Safety Engineer is responsible for the governance and management of all process safety, risk management, and loss prevention activities throughout the full lifecycle of the integrated project. Acting on behalf of the Owner within the PMT, this role ensures that safety considerations are embedded in site selection, layout development, FEED, detailed design, construction, commissioning, and start-up. The Senior Process Safety Engineer oversees all safety studies, risk assessments, and safety-related design reviews, and ensures alignment with international standards, regulatory requirements, and Owner safety philosophy. The role includes oversight of PMC safety resources and coordination of safety inputs across all contractors and licensors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li><li>Competencies:</li><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul></ul>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior Process Safety Engineer<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Senior Process Safety Engineer<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Any</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Job Purpose</b></p><br><br><br><p>Shaping risk management by developing guidelines and leading/participating in safety studies, safety reviews, implementing PSM/HSSE Management, also acting as a consultant for commercial teams and other business partners in the early stages of project development &amp; MOC detailed Risk assessment</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><br><ul><li><span>Provide technical leadership, advice and support in the implementation of Safety Management Systems.</span></li><li><span>Provide HSEQ input in the Risk and Safety studies performed (e.g. HAZOP, HAZID), participate in internal audits, conducts independent safety tours; and support safety improvements, including Root Cause Analysis (RCA) and procedure development, with a particular focus on process safety.</span></li><li><span>Improve process safety awareness across the organization, particularly among engineers and project leaders, through continuous improvement initiatives, Management of Change (MOC), and joint site inspections.</span></li><li><span>Facilitate and participate in P&amp;ID reviews, HEMP, HAZID, HAZOP, SIL, layout safety reviews, PSSR, 3D model reviews, safety audits, QRA workshops, and other relevant process and technical safety studies.</span></li><li><span>Deliver training and actively communicate Process Safety Management (PSM) requirements and related matters to the organization and relevant stakeholders.</span></li><li><span>Coordinate and oversee process safety engineering activities to ensure technical objectives are achieved during new projects, MOCs, and technical studies.</span></li><li><span>Review technical bid submissions and conduct technical bid evaluations and analyses. </span></li><li><span>Participate in EPC contractor and vendor pre-qualification, bid evaluation, and performance evaluation.</span></li><li><span>Ensure the quality and accuracy of EPC contractors' process safety engineering activities and review associated deliverables, including philosophies, layouts, detailed drawings, close-out reports, risk studies, and process safety system documentation.</span></li><li><span>Participate in the commissioning, start-up, and performance testing of new projects, verifying the availability and functionality of Process and Technical Safety Systems.</span></li><li><span>Develop Process Safety Management procedures, monitor their implementation, and evaluate their effectiveness.</span></li><li><span>Develop Technical Supply Specifications, Technical Design Guidelines, and Basis for Design documentation for large-scale MOCs.</span></li><li><span>Support HSE, Process Safety, and Asset Integrity audits and coordinate the planning and implementation of resulting corrective actions.</span></li><li><span>Participate in Process Incidents Investigations.</span></li><li><span>Provide Process and Process Safety technical expertise in Flow Assurance, Hydraulic Calculations, Blowdown Verification, Surge Analysis &amp; Equipment Sizing.</span></li></ul><br><p><b>Technical Qualification &amp; Skills</b></p><br><br><ul><li><span>Minimum Bachelor's degree in Chemical Engineering.</span></li><li><span>15+ of engineering experience in the Oil and Gas industry.</span></li><li><span>10+ years of Process Safety engineering experience or equivalent in the Oil and Gas industry.</span></li><li><span>Experience with Brownfield / Revamp projects.</span></li><li><span>Practical knowledge and experience in HAZOP, LOPA, MOC, Physical Effects Modelling, and Facility Siting.</span></li><li><span>Good knowledge of CCPS/EI Process Safety Management and Risk-Based Process (RBPS) guidelines.</span></li><li><span>PH &amp; RA certifications.</span></li><li><span>Strong knowledge of process safety regulations, standards, and industry practices, including OSHA PSM, EPA RMP, and NFPA requirements</span></li></ul><br><p><b>Soft skills</b></p><br><br><ul><li><span>Excellent analytical, problem-solving, and management skills.</span></li><li><span>Strong communication and interpersonal skills.</span></li><li><span>Ability to work independently and as part of a team.</span></li><li><span>Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint and Outlook.</span></li><li><span>English - upper intermediate proficiency (both verbal &amp; written)</span></li></ul><br><br><br><br> </div>

<p><h4>Lead process engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Production delivery, optimisation & excellent performance</h4> <ul> <li>Responsible for the day-to-day plant optimisation.</li> <li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.</li> <li>Responsible for ensuring robust plant monitoring routines are completed with all deviations acted on and ensuring system is fit for purpose.</li> <li>Support investigations (e.g. 5 Whys) for all process safety incidents, production losses and product quality issues over defined limits.</li> <li>Drive clear prioritisation of vulnerabilities so action is focused in the right areas.</li> <li>Actively lead and ensure participation in continuous improvement projects on your sites and promote the benefit of the CI philosophy to engage the site teams in this process.</li> </ul> <h4>Experience, qualifications & key skills</h4> <ul> <li>Above 10 years experience in O&G industry (preferable with IOC’s direct or contract)</li> <li>Technical degree in chemical engineering or allied engineering subject.</li> <li>Previous experience in asset engineering / operations engineering role</li> <li>Practical / operational exposure to production facilities</li> <li>Excellent communication, interpersonal and coaching skills</li> <li>Strong bias for being proactive and getting results</li> <li>Excellent IT skills – office suite, document management, applications for CMMS and change management.</li> <li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results</li> <li>Skilled in behaviour change management</li> </ul> <p><strong>Not essential but preferable:</strong></p> <ul> <li>Professional (Chartered) engineer / TA2-3 qualified</li> <li>Experience in roles in culturally and linguistically diverse working environments.</li> </ul> <h4>Preferred qualifications:</h4> <p>Certified professional engineer</p> <p>Belong. Connect. Grow. with KBR!</p></p><p></p>

<br> <p> <strong>Job Summary</strong> </p> <p>The purpose of this position is to ensure effective and efficient operation of Water Treatment Plant, water analysis and in-house effluent &amp; emission monitoring at plant site and to adhere to standards of regulatory authorities. The Shift Chemist is also to monitor and take measures to maintain the chemistry of water systems including Boiler chemistry within the prescribed Limits.</p> <p> <strong>Essential Duties &amp; Responsibilities:</strong> </p> <ul> <li>Maintain close coordination with Plant Chemist for Monitoring and managing boiler chemistry</li> <li>Carry out on daily basis, analysis of Raw water, Waste water, Water treatment plant, boiler water &amp; steam, Cooling Tower water and closed cooling system according to applicable standards and maintaining system chemistry within the recommended limits.</li> <li>Operate of the water treatment plant (production / regeneration)</li> <li>Collect sample for Lubricant / oil of plant &amp; machinery</li> <li>Manage personal protection device (chemical suits, respirators etc.)</li> <li>Supervise &amp; assist in unloading of all type of chemical from the chemical vendors.</li> <li>Understand OH&amp;S risks / hazards and environmental / legislative aspect / impacts related to work activities.</li> <li>Issue Confined space entry, Gas free certificate etc. as and when required under the Plant Safety rules for ongoing job in the absence of Plant Chemist.</li> <li>Raise work orders for required operational preventative and corrective maintenance</li> <li>Travel extensively (internationally and domestically)</li> <li>You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li> </ul> <p> <strong>Required Qualifications &amp; Experience</strong>:</p> <ul> <li>Bachelor s Degree in Chemical Engineering or Chemistry focus</li> <li>Minimum 3-5 years related experience in a similar position at combined cycle power plant preferably having GE F Class Technology or CCPP/Petrochemicals.</li> <li>English proficiency required</li> </ul> <p> <strong>Desired Characteristics:</strong> </p> <ul> <li>Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals.</li> <li>Ability to write routine reports and correspondence.</li> <li>Ability to speak effectively to employees of the organization</li> </ul> <p> <strong> </strong> </p> <p> <strong> </strong> </p> <p> <em>FieldCore is an equal employment opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, marital status, pregnancy, sexual orientation, ancestry, genetic information, gender identity, or any other characteristic protected by law</em> </p> <p></p>

<p><h4>About company</h4> <p>Belong, connect, grow with KBR! The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job purpose</h4> <p>Shaping risk management by developing guidelines and leading or participating in safety studies, safety reviews, implementing PSM and HSSE management, also acting as a consultant for commercial teams and other business partners in the early stages of project development and MOC detailed risk assessment.</p> <h4>Job responsibilities</h4> <ul> <li>Provide technical leadership, advice and support in the implementation of Safety Management Systems.</li> <li>Provide HSEQ input in the risk and safety studies performed (e.g. HAZOP, HAZID), participate in internal audits, conduct independent safety tours, and support safety improvements, including root cause analysis (RCA) and procedure development, with a particular focus on process safety.</li> <li>Improve process safety awareness across the organization, particularly among engineers and project leaders, through continuous improvement initiatives, management of change (MOC), and joint site inspections.</li> <li>Facilitate and participate in P&ID reviews, HEMP, HAZID, HAZOP, SIL, layout safety reviews, PSSR, 3D model reviews, safety audits, QRA workshops, and other relevant process and technical safety studies.</li> <li>Deliver training and actively communicate process safety management (PSM) requirements and related matters to the organization and relevant stakeholders.</li> <li>Coordinate and oversee process safety engineering activities to ensure technical objectives are achieved during new projects, MOCs, and technical studies.</li> <li>Review technical bid submissions and conduct technical bid evaluations and analyses.</li> <li>Participate in EPC contractor and vendor pre-qualification, bid evaluation, and performance evaluation.</li> <li>Ensure the quality and accuracy of EPC contractors' process safety engineering activities and review associated deliverables, including philosophies, layouts, detailed drawings, close-out reports, risk studies, and process safety system documentation.</li> <li>Participate in the commissioning, start-up, and performance testing of new projects, verifying the availability and functionality of process and technical safety systems.</li> <li>Develop process safety management procedures, monitor their implementation, and evaluate their effectiveness.</li> <li>Develop technical supply specifications, technical design guidelines, and basis for design documentation for large-scale MOCs.</li> <li>Support HSE, process safety, and asset integrity audits and coordinate the planning and implementation of resulting corrective actions.</li> <li>Participate in process incidents investigations.</li> <li>Provide process and process safety technical expertise in flow assurance, hydraulic calculations, blowdown verification, surge analysis and equipment sizing.</li> </ul> <h4>Technical qualification & skills</h4> <ul> <li>Minimum bachelor's degree in chemical engineering.</li> <li>15+ years of engineering experience in the oil and gas industry.</li> <li>10+ years of process safety engineering experience or equivalent in the oil and gas industry.</li> <li>Experience with brownfield and revamp projects.</li> <li>Practical knowledge and experience in HAZOP, LOPA, MOC, physical effects modelling, and facility siting.</li> <li>Good knowledge of CCPS/EI process safety management and risk-based process safety (RBPS) guidelines.</li> <li>PHA and RA certifications.</li> <li>Strong knowledge of process safety regulations, standards, and industry practices, including OSHA PSM, EPA RMP, and NFPA requirements.</li> </ul> <h4>Soft skills</h4> <ul> <li>Excellent analytical, problem-solving, and management skills.</li> <li>Strong communication and interpersonal skills.</li> <li>Ability to work independently and as part of a team.</li> <li>Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint, and Outlook.</li> <li>English - upper intermediate proficiency (both verbal and written).</li> </ul></p><p></p>

<h3>Position Title</h3><p>Production Manager</p><h3>Department</h3><p>Production</p><h3>Reports To</h3><p>Plant Manager / General Manager</p><h3>Position Summary</h3><p>The Production Manager is responsible for planning, organizing, directing, and controlling all manufacturing operations to ensure production targets are achieved safely, efficiently, and in compliance with the company's quality, food safety, and operational standards. The role focuses on maximizing productivity, minimizing downtime and waste, optimizing resource utilization, and driving continuous improvement across all production activities.</p><h3>Key Responsibilities</h3><ul><li><p>Plan, organize, and manage all daily production operations to ensure the achievement of production targets.</p></li><li><p>Develop and implement daily, weekly, and monthly production plans in coordination with Sales, Supply Chain, Warehouse, Maintenance, and Quality departments.</p></li><li><p>Ensure production schedules are executed on time while meeting quality, safety, and cost objectives.</p></li><li><p>Supervise all manufacturing and packaging operations across production lines.</p></li><li><p>Monitor production performance, analyze operational data, and implement corrective actions to improve efficiency.</p></li><li><p>Maximize Overall Equipment Effectiveness (OEE) through continuous monitoring and performance improvement initiatives.</p></li><li><p>Identify production bottlenecks and implement solutions to minimize downtime and increase productivity.</p></li><li><p>Coordinate closely with the Maintenance Department to ensure equipment reliability and preventive maintenance execution.</p></li><li><p>Ensure the availability of raw materials and packaging materials to support uninterrupted production.</p></li><li><p>Optimize labor utilization and production resources to maximize operational efficiency.</p></li><li><p>Monitor production costs and implement initiatives to reduce waste and improve cost efficiency.</p></li><li><p>Ensure compliance with Good Manufacturing Practices (GMP), HACCP, ISO 22000, and all food safety and quality standards.</p></li><li><p>Develop, review, and enforce Standard Operating Procedures (SOPs) and work instructions.</p></li><li><p>Lead continuous improvement initiatives using Lean Manufacturing and best manufacturing practices.</p></li><li><p>Analyze production issues using Root Cause Analysis (RCA) and implement Corrective and Preventive Actions (CAPA).</p></li><li><p>Prepare and present daily, weekly, and monthly production performance reports to senior management.</p></li><li><p>Manage production budgets and support cost-saving initiatives.</p></li><li><p>Lead the recruitment, training, coaching, and performance evaluation of production supervisors and operators.</p></li><li><p>Foster a culture of teamwork, accountability, operational excellence, and continuous improvement.</p></li><li><p>Ensure full compliance with Occupational Health &amp; Safety regulations and company policies.</p></li><li><p>Conduct regular production meetings to review performance, address operational challenges, and align production priorities.</p></li><li><p>Participate in the planning, installation, commissioning, and startup of new production lines and manufacturing equipment.</p></li><li><p>Support new product development, process validation, and production trials.</p></li><li><p>Collaborate effectively with cross-functional departments to ensure smooth plant operations.</p></li><li><p>Perform any additional duties assigned by senior management that are related to the role.</p></li></ul><p></p><p><strong>Requirements</strong></p><h1>Job Requirements</h1><h3>Education</h3><ul><li><p>Bachelor's degree in Mechanical Engineering, Industrial Engineering, Production Engineering, Food Engineering, Chemical Engineering, or a related field.</p></li><li><p>A Master's degree in Industrial Management, Operations Management, Business Administration (MBA), or a related discipline is an advantage.</p></li></ul><h3>Experience</h3><ul><li><p>Minimum of <strong>10 years</strong> of experience in a food and beverage manufacturing environment.</p></li><li><p>At least <strong>5 years</strong> of experience in a Production Manager or equivalent leadership role.</p></li><li><p>Proven experience in managing high-speed production and packaging lines.</p></li><li><p>Experience in the production of bottled water, carbonated soft drinks, juices, energy drinks, or dairy beverages is highly preferred.</p></li><li><p>Experience in leading large production teams and managing multi-shift operations.</p></li></ul><h3>Technical Skills</h3><ul><li><p>Strong knowledge of Production Planning and Scheduling.</p></li><li><p>Experience with Lean Manufacturing, Continuous Improvement, and Waste Reduction initiatives.</p></li><li><p>Knowledge of Overall Equipment Effectiveness (OEE) and production performance analysis.</p></li><li><p>Experience in Root Cause Analysis (RCA) and Corrective &amp; Preventive Actions (CAPA).</p></li><li><p>Familiarity with Total Productive Maintenance (TPM) principles.</p></li><li><p>Strong understanding of Good Manufacturing Practices (GMP).</p></li><li><p>Knowledge of HACCP and ISO 22000 Food Safety Management Systems.</p></li><li><p>Experience in production cost control and productivity improvement.</p></li><li><p>Ability to develop and implement Standard Operating Procedures (SOPs).</p></li><li><p>Proficiency in ERP systems (Odoo, SAP, Oracle, Microsoft Dynamics, or similar).</p></li><li><p>Advanced proficiency in Microsoft Office, particularly Microsoft Excel.</p></li></ul><h3>Leadership &amp; Management Skills</h3><ul><li><p>Strong leadership and team management capabilities.</p></li><li><p>Excellent planning, organizing, and decision-making skills.</p></li><li><p>Ability to manage multiple priorities in a fast-paced manufacturing environment.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Excellent communication and interpersonal skills.</p></li><li><p>Ability to motivate, coach, and develop production teams.</p></li><li><p>Strong conflict resolution and performance management skills.</p></li><li><p>Results-oriented with a continuous improvement mindset.</p></li></ul><h3>Language Requirements</h3><ul><li><p>Fluent in Arabic.</p></li><li><p>Good command of English (spoken and written).</p></li></ul><h3>Computer Skills</h3><ul><li><p>Microsoft Office Suite (Advanced), especially Excel.</p></li><li><p>ERP Systems.</p></li><li><p>Power BI or other data visualization tools is an advantage.</p></li></ul><h3>Personal Attributes</h3><ul><li><p>High level of integrity and professionalism.</p></li><li><p>Strong sense of responsibility and accountability.</p></li><li><p>Ability to work under pressure and meet tight deadlines.</p></li><li><p>Excellent organizational and time management skills.</p></li><li><p>Adaptability and flexibility in a dynamic manufacturing environment.</p></li><li><p>Commitment to workplace safety, quality, and operational excellence.</p></li></ul><p></p>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p>To work as a Pipe Fitter at project site.</p><p>Measure, cut, thread, bend, and assemble pipes using hand and power tools. Install hangers, supports, and other components to secure piping systems. Install piping systems for water supply, drainage, sewage, and stormwater as per site requirements. Inspect completed systems to ensure compliance with construction and safety standards. Carry out routine maintenance or repair of existing piping infrastructure.</p><p><strong>Desired Candidate Profile</strong></p><p>High School diploma or equivalent. Preferably Ex-Daewoo. Proven experience of 06 years in constructions, specifically in fertilizer or petrochemical process projects.</p>

<p >Skills : Project Engineer</p><p >Other Skills : Interface Engineer, interface principles, interface management. FEED, EPC, engineering interfaces, interface registers, interface matrices, interface issues, Oil and Gas, Petrochemical</p><p >Experience : 20 + Years</p><p >Education : Bachelors/3-5 yr Degree</p><p >Employment Type : Full Time Salaried Employee</p><p >Location : Iraq, Iraq</p><p >Qualifications and Experience</p><p >Education: Bachelor degree and above in Engineering.</p><p >Experience: Minimum 20 years of experience in large-scale oil, gas, refining, or petrochemical projects, with extensive exposure to FEED, EPC, and commissioning phases.</p><p >Competencies:</p><p >Strong understanding of multidisciplinary engineering interfaces</p><p >Proven ability to manage complex multi-contractor environments</p><p >Strong coordination, negotiation, and conflict resolution skills</p><p >Experience working with government authorities and licensors</p><p >Must have overseas work experience.</p><p >Fluent English (capable of using it as the operational language in daily work).</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Tile and marble setters are responsible for installing hard tiles, wood, and marble in homes and offices. They determine the tile or marble pattern layout, cut and shape the tiles to size, and expertly install flooring fixtures using hand and machine tools.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Knowledge of Tiles and basic Chemicals</li><li>Measuring and marking: Measuring and marking surfaces to be tiled</li><li>Preparing surfaces: Preparing surfaces for tiling by cleaning and applying waterproofing material or lath</li><li>Cutting and shaping: Cutting and shaping tiles to fit around obstacles and in tight spaces</li><li>Forming tile beds: Forming tile beds using concrete, plaster, mastic, cement, glue, or mortar</li><li>Aligning and straightening: Aligning and straightening tiles to ensure patterns are even and precise</li><li>Installing and anchoring: Installing and anchoring fixtures in designated positions</li><li>Mixing and applying: Mixing, applying, and spreading adhesive to apply, seal, and finish tile</li><li>Creating designs: Creating decorative wall and floor designs by laying and setting mosaic tiles</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is currently recruiting for a Chemical Injection Supervisor to join its Iraq business unit focusing on overseeing the daily operations of chemical injection, blending, and production processes to ensure efficiency, quality, and safety.&nbsp;<br> This is a full-time onsite position in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Position - Civil &amp; Structural Construction Supervisor&nbsp;<br> Job Location - Al-Anbar - Iraq<br> Working Rotation - 6 weeks on &amp; 3 weeks off<ul><li>A civil-Structural supervisor oversees and manages the Civil - Structural construction process, ensuring that projects are completed on time, and to the required quality standards.</li><li>To manage the interfaces of Civil Domain</li></ul><br> <strong>Education &amp; Experience</strong>:<br> • Bachelor’s degree in civil engineering or a similar field.<br> • 10+ years Proven work experience as a Civil &amp; structural supervisor in Oil &amp; Gas EPCC Projects.<br> • Strong leadership and managerial skills.<br> • A good eye for detail.<br> • Civil &amp; structural Project Management<br> • Civil &amp; Structural Design<br> • Civil &amp; Structural Construction oil gas sector<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br><br>Project Director<br><br>Sector: Oil &amp; Gas<br><br>Rotation: No. This is a residential basis role with R&amp;R periods<br><br>Work Location: Iraq<br><br>Requirements:<br><br>15+ years experience in oil and gas project management working for an oil and gas operator or major EPC company.<br><br>Must have led a full-cycle execution of a gas processing plant from FEED through to commissioning and handover.<br><br>Sour gas, H2S experience is a must<br><br>Middle East Project Management experience<br><br>Education:<br><br>Engineering Degree in Process, Chemical, Medical or Petroleum Engineering<br><br>Let op: vacaturefraude<br><br>Helaas komt vacaturefraude steeds vaker voor. We waarschuwen je voor mogelijke misleiding:<br>* Wij zullen nooit via WhatsApp of in een videogesprek vragen om jouw persoonlijke gegevens (zoals een kopie van je ID, bankgegevens of BSN).<br>* Twijfel je over de echtheid van een vacature of contactpersoon? Neem dan altijd rechtstreeks contact met ons op via de officiële contactgegevens op onze website.<br> <br>Important: job fraud<br> <br>Unfortunately, job fraud is becoming more common. Beware of such scams:<br>* We will never ask for personal information (such as a copy of your ID, bank details, or social security number) via WhatsApp or during a video call.<br>* If you're unsure whether a vacancy or contact person is legitimate, please reach out to us directly using the official contact details on our website.<br> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills">Project Director, Project Manager, Sour Gas, H2S, Gas Plant, Gas Processing Facilities, Early production facilities, EPF <br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Title- Safety OPS Support</strong><br> <strong>Location:&nbsp; Basra, Iraq.</strong><br> <strong>Tenure- Contractual Role</strong><br> <strong>Activities and Accountabilities</strong><br> • Support implementation of HSE Management system of the Affiliate across all GGIP projects and TEPRH departments. Participate in<br> redaction of HSE Plans and Procedures, assist with deployment on site and cascading best practice to peers and contractors.<br> • Redaction, revision and implementation of operational safety and occupational health plans, procedures and instructions.<br> • Providing input to bridging documents with EPC contractors.<br> • Review and improve Method Statements and Job Risk Assessments by accompanying contractors through the risk assessment and Permit<br> to Work process.<br> • Support site teams in implementation of the PTW process and JRA during the ongoing operations: Toolbox talks, awareness sessions,<br> Safety Green Light coaching.<br> • Ensure work on site aligns with permit conditions and that the safety controls are effectively implemented. Liaise with site supervisors.<br> • Assist entities in deployment of the E-Permit system for digital PTW process.<br> • Participate in revision of SIMOPS dossiers, as needed.<br> • Assit Project teams with implementation of effective control measures on Projects’ construction sites (e.g., accommodation hygiene,<br> potable water management, handling of chemicals/COSHH, H2S, health surveillance, management of hazardous substances, lifting etc.).<br> • Carry out site inpections and audits as needed, register findings and propose effective mitigation measures. Accompany site teams and<br> drive the improvement. Prepare Action Plans. Ensure Actions are registered in Synergi and closed in due time.<br> • Participate in incident investigations and CTAs when needed.<br> • Assist Projects and Affiliate teams in development of necessary HSE competences by organizing trainings and awareness sessions, while<br> liaising with topic experts (for example APLO, Industrial Hygiene, Technological Risks etc).<br> • Carry out KPI reporting and monitoring, document site visits, inspections, drills and exercises. Contribute to the analysis of HSE<br> performance to identify areas for improvement to prevent accidents.<br> • Maintain and animate the HSE network by preparing and presenting safety moments, REX presentations, Golden Rules awareness sessions,<br> safety standdowns etc.<br> • Assist the deployment of Group’s HSE programs dedicated to a high performing safety culture (golden rules, zero fatality program, stop<br> card, Safety+, etc.) within TEEP-RATWI, in liaison with the HSE Network.<br> <strong>Qualifications/Experience required</strong><br> • Degree in safety/mechanical/process engineering or relevant job experience.<br> • 5 to 10 years of experience in the oil industry, with significant experience in site construction activities, production or drilling activities.<br> • Ability to communicate and network in a complex and multicultural organization. Initiative, reactivity, ability to synthesize and prioritize<br> are essential assets<br> • Previous experience under SIMOPS works or experience in leading site team will be considered as a plus<br> • Good knowledge health &amp; safety legislation, sufficient to offer good advice without reference, and be able to offer detailed advice through<br> reference to documentation<br> • Ability to develop knowledge of company and group health &amp; safety standards and procedures<br> • Trained to be member of investigations team of accidents/incidents<br> • Possess current and in date medical certification<br> • Written and oral communication in English and Arabic are essential/mandatory<br> &nbsp;<br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>Reports to the Nominated Project Maintenance Supervisor. As directed, leads or carries out maintenance of field instrumentation such as field measuring &amp; indicating devices transmitters, control valves, emergency shutdown valves, motor operated valves, flame sensors and vibration probes loading arm instruments, gas &amp; steam turbine, compressor and burner management instrumentations system to retain them in functional and good operating order for reliable performance with minimum or no supervision. Ensures compliance with PPM requirements and prepares records of validation/calibration data and details of maintenance activities carried out. Guide instrument technicians for effective execution of jobs in time and achieving appropriate standard of work. Communicates with supervisor, maintenance technicians, and operations and provides feedback on job progress. Evaluates and reports on maintenance needs and priorities in his area of responsibility. Reviews work notifications, manages work orders and provides details of maintenance activities. Leads diagnosis and repair of faults &amp; breakdowns and reports operational and functional problems to supervisor and carries out remedial action under supervisor s direction. Participates in acceptance tests of new and upgrade systems, identifies deficiencies and provides punch list. Compiles and submits reports on incidents and failure investigations as and when required. Conduct toolbox meeting with other technicians and insist on strict adherence to Project safety rules. Ensures safety of personnel and equipment through compliance with company s Environmental Health and Safety policies, procedures and standards. Job Specific Requirements: Well versed in techniques and devices used for measurement of different process variables such as flow, temperature, pressure, density and level. Good knowledge and troubleshooting of pneumatic, hydraulic, electronic and digital instrumentation systems. Good knowledge in vibration measurement, burner management, gas turbine control &amp; compressor anti-surge control instrumentation. Should be able to understand Piping &amp; Instrumentation Diagrams, Process Flow Diagrams, Loop Drawings and Cause &amp; Effect, Function Block &amp; Ladder Logic Diagrams. Installation, calibration, testing and commissioning of instrumentation in a diversified oil &amp; gas processing, LNG or petrochemical plant. Good knowledge of gas turbine Speedtronic Mark V&amp; VI control, Bentley Nevada Vibration, compressor anti-surge control (CCC). Triconex &amp; standalone PLC, Distributed Control and Emergency Shutdown Systems would be advantageous. Familiar with a permit to work system and LOTO and temporary defeat system procedures.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Higher Secondary School Education plus a three to five year technical diploma or certificate in Instrumentation or Electronics from a recognized institution.</p>