Copper Technician Jobs in Iraq
86 Jobs Found
Save and set alert for similar positionsManage alerts
<p>The Avionics Technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical / avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical / avionics discrepancies.</p> <div> <div> <div> <div> <div> <div> <div> <div> <div>
<p> </p>
<p> <b>Essential Responsibilities:</b> </p>
<ul>
<li> <p>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems</p> </li>
<li> <p>Possess a high degree of expertise of aircraft electrical/avionics systems</p> </li>
<li> <p>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications</p> </li>
<li> <p>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical / avionics systems.</p> </li>
<li> <p>Utilize test equipment to include but not limited to digital volt / amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics / electrical systems.</p> </li>
<li> <p>Order parts and materials.</p> </li>
<li> <p>Obtain and maintain qualification as a Plane Captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2. </p> </li>
<li> <p>Operate ground support equipment.</p> </li>
<li> <p>Identify and treat avionics/ electrical corrosion.</p> </li>
<li> <p>Perform aircraft jacking and hoisting as required.</p> </li>
<li> <p>Perform certification and re-certification of altimeter systems.</p> </li>
<li> <p>Perform calibration of directional guidance systems.</p> </li>
<li> <p>Required to perform collateral duty inspections.</p> </li>
<li> <p>Must obtain and keep current turn qualification.</p> </li>
<li> <p>Maintain cleanliness of the work center.</p> </li>
<li> <p>Comply with Foreign Object Damage (FOD), Egress Familiarization, and Hazardous Waste and Tool Control programs.</p> </li>
<li> <p>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</p> </li>
<li> <p>Assist as directed to ensure safety, security and preservation of government / company owned equipment.</p> </li>
<li> <p>Present a courteous and professional demeanor when dealing with customers.</p> </li>
<li> <p>Furnish and maintain own hand tools.</p> </li>
<li> <p>Operate portable firefighting equipment.</p> </li>
<li> <p>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</p> </li>
<li> <p>Perform all other position related duties as assigned or requested.</p> </li>
</ul>
<p> </p>
<p> <b>Minimum Qualifications:</b> </p>
<ul>
<li> <p>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and / or experience working with similar avionics systems and components is required.</p> </li>
<li> <p>Graduation from high school or GED required.</p> </li>
<li> <p>Must be able to meet any Government / Company licensing / qualification requirements for the position.</p> </li>
<li> <p>Must have an FAA Airframe and Powerplant (A&P) License.</p> </li>
<li> <p>Must have three (3) years experience in T6 aircraft electrical / avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/ or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirement.</p> </li>
<li> <p>Demonstrate a basic knowledge of aircraft systems and nomenclature. </p> </li>
<li> <p>Possess working knowledge and skill in the use of basic tools and test equipment.</p> </li>
<li> <p>Must be familiar with the operational capabilities and limitations of electrical / avionics systems.</p> </li>
<li> <p>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</p> </li>
<li> <p>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</p> </li>
<li> <p>Must obtain and keep current turn qualification.</p> </li>
</ul>
</div></div></div></div></div></div></div></div></div>
<p><h4>Essential responsibilities:</h4>
<p>The avionics technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical/avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical/avionics discrepancies.</p>
<ul>
<li>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems.</li>
<li>Possess a high degree of expertise of aircraft electrical/avionics systems.</li>
<li>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications.</li>
<li>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical/avionics systems.</li>
<li>Utilize test equipment to include but not limited to digital volt/amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics/electrical systems.</li>
<li>Order parts and materials.</li>
<li>Obtain and maintain qualification as a plane captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2.</li>
<li>Operate ground support equipment.</li>
<li>Identify and treat avionics/electrical corrosion.</li>
<li>Perform aircraft jacking and hoisting as required.</li>
<li>Perform certification and re-certification of altimeter systems.</li>
<li>Perform calibration of directional guidance systems.</li>
<li>Required to perform collateral duty inspections.</li>
<li>Must obtain and keep current turn qualification.</li>
<li>Maintain cleanliness of the work center.</li>
<li>Comply with foreign object damage (FOD), egress familiarization, and hazardous waste and tool control programs.</li>
<li>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</li>
<li>Assist as directed to ensure safety, security and preservation of government/company owned equipment.</li>
<li>Present a courteous and professional demeanor when dealing with customers.</li>
<li>Furnish and maintain own hand tools.</li>
<li>Operate portable firefighting equipment.</li>
<li>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</li>
<li>Perform all other position related duties as assigned or requested.</li>
</ul>
<h4>Minimum qualifications:</h4>
<ul>
<li>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and/or experience working with similar avionics systems and components is required.</li>
<li>Graduation from high school or GED required.</li>
<li>Must be able to meet any government/company licensing/qualification requirements for the position.</li>
<li>Must have an FAA Airframe and Powerplant (A&P) license.</li>
<li>Must have three (3) years’ experience in T6 aircraft electrical/avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirements.</li>
<li>Demonstrate a basic knowledge of aircraft systems and nomenclature.</li>
<li>Possess working knowledge and skill in the use of basic tools and test equipment.</li>
<li>Must be familiar with the operational capabilities and limitations of electrical/avionics systems.</li>
<li>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</li>
<li>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</li>
<li>Must obtain and keep current turn qualification.</li>
</ul></p><p></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Overview Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $3.9B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsibilities This posting is part of our ongoing talent pipeline and is not tied to an active opening; qualified candidates will be contacted when the role officially becomes available Summary: The F-16 Weapons Technician is responsible for the Oversight/Training/Instruction of inspections, maintenance, and repair of weapons systems and associated equipment on the F-16 aircraft , loading ordnance, and configuring load outs for each flight. Oversight/Training/Instructions for the following duties and responsibilities: + Administers/monitors weapons loading standardization training and evaluation programs. + Documents/ maintains qualification/certification status per the company training and certification requirements. + Weapons load crew duties, as required , in support of training exercises, inspections, etc. + Monitors flightline munitions/explosive handling and loading operations, if applicable. + Monitors load crews during operations + Maintains current awareness and training of proper weapons storage and security, if applicable. + Armament systems maintenance/loading/flight operations, as applicable. + Installation/removal of alternate mission equipment (AME) and normally-installed equipment, as needed, and weapons OPS checks. + One-time inspections (OTI); Time Compliance Tech Orders (TCTO); and maintains /inspects tools and equipment. + May be asked to perform End-of-Runway (EOR) inspections, if needed. + Troubleshooting and repairs to assigned aircraft as directed. + Read and interpret schematics, engineering drawings, and other technical directives. + Ensure the work accomplished on any aircraft or component is in compliance + Complete and certify work reports for all work accomplished on the aircraft . + Follow company procedures as per the maintenance operations manual using safe work practices. + Ability to work independently and to carry out assignments to completion within parameters of instructions given prescribed routines, and standard accepted practices. Qualifications Job Requirements: + High school diploma or GED required + Associate degree strongly preferred, Bachelor's Degree or equivalent a plus + A minimum of 8-10 years of direct F-16 Weapons/Armament Maintenance experience and training on F-16 aircraft . + USAF 7 – Level skill or equivalent What We Bring + At V2X, we strive to be market competitive in our total reward offerings. + The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. + Please speak with a recruiter for additional information. + Employee benefits include the following: + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients</p> </div>
<p>The Air Crew Life Support Technician will perform inspections, maintenance and troubleshooting tasks on T-6A aircraft. Essential Responsibilities but not limited to:</p><ul><li>Perform launch, recovery, scheduled and unscheduled inspections/maintenance.</li><li>Preflight/thru flight/BPO inspections, ground handling, minor maintenance, and servicing.</li><li>Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance.</li><li>Services aircraft. Performs end-of-runway, post-flight, preflight, thru-flight, and phase inspections.</li><li>Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.</li><li>Performs inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures.</li><li>Services, operates, and maintains ground support equipment and performs interior and exterior cleaning of aircraft and work areas. Must precisely complete all maintenance documentation.</li><li>Perform all other position related duties as assigned or requested.</li></ul><p>Minimum Position Knowledge, Skills, and Abilities Required:</p><ul><li>Must have a current FAA Airframe and Powerplant (A&P) license in good standing.</li><li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li><li>Experience with OBOGS systems and T-6 Life support required.</li><li>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</li><li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Possess a current state issued driver s license.</li><li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</li><li>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</li></ul><p>Work Environment, Physical Demands, and Mental Demands:</p><ul><li>Must possess the ability to carry and lift overhead up to 50 pounds.</li><li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li><li>Must be able to work at high altitudes when performing flight attendant duties.</li><li>Work is primarily performed outside in a high-level noise environment.</li><li>Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Must have a current FAA Airframe and Powerplant (A&P) license in good standing.</p><p>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</p><p>Experience with OBOGS systems and T-6 Life support required.</p><p>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</p><p>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</p><p>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</p><p>Possess a current state issued driver s license.</p><p>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</p><p>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</p><p>Must possess the ability to carry and lift overhead up to 50 pounds.</p><p>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</p><p>Must be able to work at high altitudes when performing flight attendant duties.</p><p>Work is primarily performed outside in a high-level noise environment.</p><p>Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</p>
<p>The Air Crew Life Support Technician will perform inspections, maintenance and troubleshooting tasks on T-6A aircraft. Essential Responsibilities but not limited to: Perform launch, recovery, scheduled and unscheduled inspections/maintenance. Preflight/thru flight/BPO inspections, ground handling, minor maintenance, and servicing. Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance. Services aircraft. Performs end-of-runway, post-flight, preflight, thru-flight, and phase inspections. Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components. Performs inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures. Services, operates, and maintains ground support equipment and performs interior and exterior cleaning of aircraft and work areas. Must precisely complete all maintenance documentation. Perform all other position related duties as assigned or requested.</p><p>Must have a current FAA Airframe and Powerplant (A&P) license in good standing. At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs. Experience with OBOGS systems and T-6 Life support required. 2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required. Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components. Must be able to inspect, repair, and operate ground support and auxiliary equipment. Possess a current state issued driver s license. Must be able to obtain and maintain U.S. passport for facility credentials/authorization. NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</p><p>Must possess the ability to carry and lift overhead up to 50 pounds. Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft. Must be able to work at high altitudes when performing flight attendant duties. Work is primarily performed outside in a high-level noise environment. Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have a current FAA Airframe and Powerplant (A&P) license in good standing.</li><li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired.</li><li>Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li><li>Experience with OBOGS systems and T-6 Life support required.</li><li>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</li><li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Possess a current state issued driver s license.</li><li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</li><li>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</li><li>Must possess the ability to carry and lift overhead up to 50 pounds.</li><li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li><li>Must be able to work at high altitudes when performing flight attendant duties.</li><li>Work is primarily performed outside in a high-level noise environment.</li><li>Performing maintenance in low-light areas, operating support equipment after daylight hours.</li><li>Work is occasionally performed in inclement weather.</li></ul>
<p>Introduction Established in 1951, IOM is a Related Organization of the United Nations and the leading UN agency in the field of migration. Working closely with governmental, intergovernmental and non-governmental partners, IOM promotes humane and orderly migration for the benefit of all. It saves lives and protects people on the move, drives solutions to displacement, and facilitates pathways for regular migration, while providing services and advice to governments and migrants. IOM is committed to fostering a respectful, inclusive and supportive workplace where all employees can thrive professionally and feel valued. By creating such an environment, IOM aims to better harness the full potential of migration and strengthen its support to people on the move. IOM invites candidates from diverse backgrounds to apply and provides reasonable accommodation throughout the recruitment process when required. Learn more about IOM s workplace culture at IOM workplace culture | International Organization for Migration Applications are welcome from internal and external candidates. For all IOM vacancies, applications from qualified and eligible first-tier candidates are considered before those of qualified and eligible second-tier candidates in the selection process. For the purpose of this vacancy, internal and internal-equivalent candidates are considered as first-tier candidates.</p><p>Organizational Context and Scope Under general guidance of the Chief of Mission (CoM), the overall supervision of the Head of Resources Management and Supply Chain Officer and, the direct supervision of the Senior Supply Chain Assistant - Logistic is responsible for the following:</p><p>Assist the Supply Chain Officer in the planning of procurement activities and analysing of purchasing trends. Identify Supply Chain bottlenecks and propose the way to fill in the gaps. Plan and prepare procurement actions and analyze procurement requests, identify service providers, evaluate information regarding vendor s performance regarding quality, prices delivery of equipment in respect of organizations best interests. Solicit bids or quotations, analyzing them for conformity to specified requirements, conduct appraisals and select suppliers, and confirm terms of payment. Prepare purchase orders and ensure receiving authorization by CoM, Supply Chain Officer according to the IOM Procurement Manual. Participate in the negociation ofcertain conditions of contracts in full compliance with IOM rules and regulations. Monitor that procurement transactions are tracked to facilitate timely delivery and shorter procurement lead times. Monitor that payments for goods and services ordered are made in timely manner and according to IOM Procurement guidelines. Ensure that the Goods Receipt Notes are acknowledged by the requisitioner upon services/works are rendered and/or the goods are received.</p><p>Logistics Monitor and track office supplies such as stationary and cleaning materials on a monthly basis. Prepare and submit to Finance Unit all payments related to Logistics services such as Utility Bills, Internet Bills, and Landlines Bills at the end of every month. Fleet management ensure that vehicle movement requests, both IOM and rented vehicles are supported and each vehicle has a vehicle logbook allocated. Ensure vehicle data is uploaded into the system in a timely and accurate manner to be able to generate monthly utilization and fuel consumption reports. Ensure Registration of all IOM assets and/or disposal with accordance with IOM procedures and regulations, and make sure that all the needed forms are signed by the staff upon assigning/releasing assets. Conduct and follow-up the fuel consumption for generators and track usage via log sheet. Communicate with the generators technician with regards to the generator's maintenance. Perform any other duties as assigned by Supply Chain Officer.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>University degree in Procurement, Business Administration, Logistics, or a related field from an accredited academic institution with three years of relevant professional experience, or Completed High School degree from an accredited academic institution with five years of relevant professional experience. Accredited Universities are those listed in the UNESCO World Higher Education Database.</li><li>Professional experience with specific focus on local/international procurement, clearing & forwarding, VAT, GoI laws and regulations, Fleet management experience and insurance management</li><li>Experience in inventory/stock/supplies management.</li><li>Experience working with an international organization or NGO in the procurement section</li><li>Fluency in English, Kurdish and Arabic is required (oral and written).</li></ul>
<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems. Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components. Service and lubricate aircraft and subsystems. Safely prepare aircraft for inspections and maintenance checks and services. Perform scheduled inspections and assist in performing special inspections. Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required. Use and perform operator maintenance on tools, special tools and aircraft ground support equipment. Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives. Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components. Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation. Participate in maintenance test flights and operation checks as required. Perform other duties as requested.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60. OR FAA A&P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li><li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</li><li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li><li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</li><li>Working knowledge of technical publications and Logistics Information Systems.</li><li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li><li>Participate in maintenance test flights and operation checks as required.</li><li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</li><li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li><li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li><li>Must be able to climb stairs, ramps, ladders, and work stands.</li><li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li><li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li><li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li><li>Will handle dirty parts and lubricants.</li><li>Will be required to wear proper Personal Protective Equipment (PPE).</li><li>Must be able to pass a Respirator Physical and Fit Test</li><li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li><li>Must be able to lift/push/pull minimum of 50 pounds.</li><li>May work in maintenance shop or outside.</li><li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li><li>May be exposed to extreme noise from operating equipment.</li><li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li><li>May be expected to work in austere environments and all-weather conditions.</li></ul>
<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains repairs and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneudraulic, engines, auxiliary power unit, and ventilation and heating systems.</p><p>• Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p><p>• Service and lubricate aircraft and subsystems.</p><p>• Safely prepare aircraft for inspections and maintenance checks and services.</p><p>• Perform scheduled inspections and assist in performing special inspections.</p><p>• Perform limited maintenance operational checks and diagnoses and troubleshoots aircraft systems using special tools and test equipment as required.</p><p>• Use and perform operator maintenance on tools, special tools and aircraft ground support equipment.</p><p>• Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft Technical Manuals, Maintenance Information and Action Messages and all technical guidance provided through government official representatives.</p><p>• Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p><p>• Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and or operation.</p><p>• Participate in maintenance test flights and operation checks as required.</p><p>• Perform other duties as requested.</p><p><strong>Knowledge & Skills</strong></p><p>• Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures and replacement of parts.</p><p>• Broad knowledge of aircraft sheet metal/structural modifications and repair.</p><p>• Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes and sheers.</p><p>• Working knowledge of technical publications and Logistics Information Systems.</p><p>• Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</p><p>• Participate in maintenance test flights and operation checks as required.</p><p>• Possess the level of experience to inspect all required aeronautical type maintenance to be performed by Mechanics.</p><p>• The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</p><p><strong>Physical Requirements/Working Environment</strong></p><p>• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</p><p>• Must be able to climb stairs, ramps, ladders, and work stands.</p><p>• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</p><p>• May be required to lift heavy objects whose weight may exceed 50 pounds.</p><p>• Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</p><p>• Will handle dirty parts and lubricants.</p><p>• Will be required to wear proper Personal Protective Equipment (PPE).</p><p>• Must be able to pass a Respirator Physical and Fit Test</p><p>• May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</p><p>• Must be able to lift/push/pull minimum of 50 pounds.</p><p>• May work in maintenance shop or outside.</p><p>• Must be able to work in a shop where the environment is drafty, noisy, and dirty.</p><p>• May be exposed to extreme noise from operating equipment.</p><p>• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p>• May be expected to work in austere environments and all-weather conditions.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements:</p><ul><li>High school diploma or equivalent required.</li><li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS) -UH60.</li><li>OR FAA A&P license AND Two (2) years of aviation maintenance experience within the past Five (5) years on the (MDS)- UH60.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Must be in possession of a Valid U.S. Passport valid for 2 years at the time of hiring and be able to travel internationally.</li><li>Must be able to obtain and maintain facility Public Trust NAC-I. "Note: US Citizenship is required for facility Public Trust NAC-I at this work location".</li><li>Must be able to clear CENTCOM MOD Physicals requirements for deployment training (Will be required to attend CRC (DIDC).</li><li>Must be able to obtain Iraq Visa.</li></ul>
<p><h4>Job Description</h4>
<p>The UH-60 Aircraft Mechanic AM-II performs the full range of military tactical aircraft maintenance and maintains, repairs, and troubleshoots malfunctions in aircraft structure, landing gear, flight surfaces and controls, anti-icing, pneuhydraulic, engines, auxiliary power unit, and ventilation and heating systems.</p>
<p>Remove and install aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.</p>
<p>Service and lubricate aircraft and subsystems.</p>
<p>Safely prepare aircraft for inspections and maintenance checks and services.</p>
<p>Perform scheduled inspections and assist in performing special inspections.</p>
<p>Perform limited maintenance operational checks and diagnose and troubleshoot aircraft systems using special tools and test equipment as required.</p>
<p>Use and perform operator maintenance on tools, special tools, and aircraft ground support equipment.</p>
<p>Apply comprehensive technical expertise to solve moderate to complex problems by interpreting technical documentation such as aircraft technical manuals, maintenance information and action messages, and all technical guidance provided through government official representatives.</p>
<p>Maintain and repair aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components.</p>
<p>Apply technical knowledge of airframe and power plant systems in determining equipment malfunctions and use required expertise in restoring equipment condition and/or operation.</p>
<p>Participate in maintenance test flights and operation checks as required.</p>
<p>Perform other duties as requested.</p>
<h4>Minimum Requirements</h4>
<ul>
<li>High school diploma or equivalent required.</li>
<li>Three (3) or more years aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li>
<li>OR FAA A&P license AND two (2) years of aviation maintenance experience within the past five (5) years on the (MDS)-UH60.</li>
<li>U.S. military technical school or specialized training course is desired; certification of education level is required.</li>
<li>Must be in possession of a valid U.S. passport valid for 2 years at the time of hiring and be able to travel internationally.</li>
<li>Must be able to obtain and maintain facility Public Trust NAC-I. Note: US citizenship is required for facility Public Trust NAC-I at this work location.</li>
<li>Must be able to clear CENTCOM MOD physical requirements for deployment training (will be required to attend CRC (DIDC)).</li>
<li>Must be able to obtain Iraq visa.</li>
</ul>
<h4>Knowledge & Skills</h4>
<ul>
<li>Thorough knowledge of aircraft mechanical component troubleshooting, repair procedures, and replacement of parts.</li>
<li>Broad knowledge of aircraft sheet metal/structural modifications and repair.</li>
<li>Basic knowledge of electrical theory and a thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal brakes, and shears.</li>
<li>Working knowledge of technical publications and logistics information systems.</li>
<li>Able to prioritize workloads to maintain schedules on assigned projects and may be required to lead teams through more complex aircraft relevant tasks.</li>
<li>Participate in maintenance test flights and operation checks as required.</li>
<li>Possess the level of experience to inspect all required aeronautical type maintenance to be performed by mechanics.</li>
<li>The incumbent receives technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks, and may be required to make entries in aircraft logs and records.</li>
</ul>
<h4>Physical Requirements / Working Environment</h4>
<ul>
<li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li>
<li>Must be able to climb stairs, ramps, ladders, and work stands.</li>
<li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li>
<li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li>
<li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li>
<li>Will handle dirty parts and lubricants.</li>
<li>Will be required to wear proper personal protective equipment (PPE).</li>
<li>Must be able to pass a respirator physical and fit test.</li>
<li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li>
<li>Must be able to lift/push/pull minimum of 50 pounds.</li>
<li>May work in maintenance shop or outside.</li>
<li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li>
<li>May be exposed to extreme noise from operating equipment.</li>
<li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li>
<li>May be expected to work in austere environments and all-weather conditions.</li>
</ul></p><p></p>
<p><h4>Job description</h4>
<p>The non-destruction inspection technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p>
<p>Determine test method and prepare fluids and parts for nondestructive inspection.<br>
Interpret nondestructive inspection test results and provide information about defects to repair center.<br>
Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.<br>
Establish radiation areas for radiographic operations.<br>
Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.<br>
Perform nondestructive inspection on structures, components, and systems.<br>
Detect flaws such as cracks, delaminations, voids, processing defects, and heat damage using penetrant testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.<br>
Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.<br>
Operate, maintain, and inspect nondestructive equipment.<br>
Perform operator maintenance and service inspections on shop equipment and tools.<br>
Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.<br>
Perform silver recovery functions.<br>
Handle and dispose of hazardous waste and materials.<br>
Perform other qualified duties as assigned.</p>
<h4>Minimum requirements</h4>
<p>High school diploma or equivalent required.<br>
U.S. military technical school or specialized training course is desired, certification of education level is required.<br>
Completion of an initial nondestructive inspection level II training course and current basic qualification.<br>
Three (3) or more years’ experience as an aviation inspector and a minimum of one year experience on the assigned (MDS) airframe (UH60, AH64, CH47).<br>
Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.<br>
Must be in possession of a U.S. passport with 3 years of validity remaining at the time of hire and be able to travel internationally.<br>
Ability to obtain and maintain a US government security clearance, NAC-I T1 public trust. US citizenship is required to obtain a T1/CAC NACI clearance.<br>
Able to clear CENTCOM medical requirements for deployment.<br>
Ability to obtain and maintain Iraq visa.</p>
<h4>Knowledge and skills</h4>
<ul>
<li>Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</li>
<li>Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</li>
<li>Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</li>
<li>Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</li>
<li>Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</li>
<li>Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</li>
<li>Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</li>
<li>Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</li>
<li>Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</li>
<li>Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</li>
<li>Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</li>
<li>Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and shears, etc. is required.</li>
<li>Ability to provide technical support to structural/mechanical engineers and customers.</li>
<li>Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</li>
</ul>
<h4>Physical requirements and working environment</h4>
<ul>
<li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li>
<li>Must be able to climb stairs, ramps, ladders, and work stands.</li>
<li>Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders.</li>
<li>May be required to lift heavy objects whose weight may exceed 50 pounds.</li>
<li>Must be able to type using a standard keyboard to communicate through e-mail and various software applications.</li>
<li>Will handle dirty parts and lubricants.</li>
<li>Will be required to wear proper personal protective equipment (PPE).</li>
<li>Must be able to pass a respirator physical and fit test qualification.</li>
<li>May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, etc.</li>
<li>Must be able to lift/push/pull minimum of 50 pounds.</li>
<li>May work in maintenance shop or outside.</li>
<li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li>
<li>May be exposed to extreme noise from operating equipment.</li>
<li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li>
</ul></p><p></p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p>Overview ***This position is physically located in Iraq*** Working across the globe, V2X builds smart solutions designed to integrate physical and digital infrastructure from base to battlefield. We bring 120 years of successful mission support to improve security, streamline logistics, and enhance readiness. Aligned around a shared purpose, our $4.5B company and 16,000 people work alongside our clients, here and abroad, to tackle their most complex challenges with integrity, respect, responsibility, and professionalism. Responsible for providing hardware and software on-site and remote support, this position requires an experienced multi-discipline technologist capable of working independently and as part of a local and corporate team. Receives trouble reports for IT equipment and software via telephone, email, and service tickets. Assesses problem reports, performs corrective actions in accordance with enterprise work instructions, and delivers deskside support to internal customers, both in-person and via remote support tools. Baselines and deploys new equipment to users. Trains company personnel in technology solutions. Serves as a technical resource. Provides problem-solving support to computer users. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Primary support and interface with site Information Management to ensure all Service Desk resources are utilized in the most efficient manner. + Assists customers with daily functions of computer, network, and software management for the site and all users. + Provides immediate response to all customers who come to the Service Desk. + Provides person to person interaction involves troubleshooting, information exchange and help with ticket submission and issues. + Provides telephone customer support for incoming and follow up calls used for initial troubleshooting. + Remedy call management software and other tools, to log and manage trouble tickets. + Must have the technical ability to accurately determine call routing for trouble tickets that cannot be resolved immediately at the Service Desk. + Creates logon and email accounts for customers as needed. + Manages Network Services with Server Manager, Print Queue Management + Works within a small continuous improvement focused team. + Tracks and documents work performed to allow accurate reporting of all Service Desk activities. + Completes all tasks and assignments as requested by Supervisors and Management. + Utilizes Windows account management tools to perform account administration, password changes, group changes, and account expiration date changes. + Performs other duties and assignments as required + Other Technical IT Duties as required. Qualifications + Minimum Qualifications: + Education/Certifications: One year related experience may be substituted for one year of education, if degree is required. Use the guide below to determine education and experience for this position. + Must be a U.S. Citizen + A valid driver’s license and the ability to obtain a U. S. Government Motor Vehicle Operator’s License and host nation Driver’s License, is required. + Experience: + Three years IT Service Desk Technician experience. + Certifications: + CompTIA A+, Microsoft 365 Certified: Modern Desktop Administrator Associate, CompTIA Network + + Skills: + Proficient in Microsoft Office 2010 or higher suite, data entry, copying, faxing, filing, assembling binders + Provides IT support for resolution of technical problems related to windows environments and windows applications, e-mail, database and security products. + Ability to isolate problem trends and troubleshoots recurring problems to find permanent solutions. + Ability to determine desktop and hardware related issues. + Excellent interpersonal skills. + Working Conditions: + Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit. + Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, dusty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months). + Includes some industrial production environment conditions as well. + Physical Requirements: + Light work. Exerting up to 20 pounds of force occasionally, and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. + Work may require heavy lifting, stooping, climbing, prolonged standing, prolonged sitting, and working with or in areas where a potential could exist for exposure to physical, chemical, or biological agents. + Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire and Safety Regulations and post policies. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>
<p>The Non-Destruction Inspection Technician (NDI) II inspects aerospace weapon systems components and support equipment for structural integrity using nondestructive inspection methods and performs fluid analysis.</p><p>• Determine test method and prepare fluids and parts for nondestructive inspection.</p><p>• Interpret nondestructive inspection test results and provide information about defects to repair center.</p><p>• Analyze wear metal content reports on engine lubricating oil and other fluids and recommend corrective action.</p><p>• Establish radiation areas for radiographic operations.</p><p>• Compute and monitor personal exposure areas for radiographic operations, and monitor personnel exposure data.</p><p>• Perform nondestructive inspection on structures, components, and systems.</p><p>• Detect flaws such as cracks, delamination s, voids, processing defects, and heat damage using penetrate testing, eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment.</p><p>• Determine metallurgical information of components according to alloy, temper, conductivity, and associated factors.</p><p>• Operate, maintain, and inspect nondestructive equipment.</p><p>• Perform operator maintenance and service inspections on shop equipment and tools.</p><p>• Ensure lock out and tag out procedures are accomplished prior to maintenance on equipment.</p><p>• Perform silver recovery functions.</p><p>• Handle and dispose of hazardous waste and materials.</p><p>• Perform other qualified duties as assigned.</p><p>Knowledge & Skills</p><p>• Previous experience in the maintenance, modification and repair of tactical aircraft systems of the type being serviced and their associated components (UH60, AH64, CH47).</p><p>• Have the skills and knowledge to set up and standardize equipment, conduct tests, interpret and evaluate for acceptance or rejection, and document.</p><p>• Thoroughly familiar with the scope and limitations of the technique/method in which they are certified.</p><p>• Capable of providing the necessary guidance and supervision to trainers and Level I personnel in the technique/method in which they are certified.</p><p>• Familiar with the codes, standards, and other contractual documents that control the method as utilized by the employer.</p><p>• Capable of developing written instructions from approved general procedures. Such instructions shall require final approval by a Level III.</p><p>• Knowledge of electrical, mechanical, electronic, hydraulic and pneumatic systems or other technology as applicable to fabrication, repair, operation and maintenance requirements.</p><p>• Efficient in record keeping and preparation of reports; capable of reviewing other people's work and determining accuracy and conformity to standards.</p><p>• Proficient in the use of the Unit Level Logistics System-Aviation Enhanced (ULLS-AE), the current maintenance management system utilized to maintain Army aircraft forms and records.</p><p>• Comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components.</p><p>• Thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems.</p><p>• Detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required.</p><p>• Ability to provide technical support to structural/mechanical engineers and customers.</p><p>• Excellent organizational skills in prioritizing workload to meet aircraft delivery schedule.</p><p>Physical Requirements/Working Environment</p><p>• Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day</p><p>• Must be able to climb stairs, ramps, ladders, and work stands</p><p>• Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders</p><p>• May be required to lift heavy objects whose weight may exceed 50 pounds</p><p>• Must be able to type using a standard keyboard to communicate through e-mail and various software applications</p><p>• Will handle dirty parts and lubricants</p><p>• Will be required to wear proper Personal Protective Equipment (PPE)</p><p>• Must be able to pass a Respirator Physical and Fit Test qualification</p><p>• May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, etc.</p><p>• Must be able to lift/push/pull minimum of 50 pounds</p><p>• May work in maintenance shop or outside</p><p>• Must be able to work in a shop where the environment is drafty, noisy, and dirty</p><p>• May be exposed to extreme noise from operating equipment</p><p>• May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements :</p><ul><li>High school diploma or equivalent required.</li><li>U.S. military technical school or specialized training course is desired, certification of education level is required.</li><li>Completion of a initial Non Destructive Inspection Level II training Course and current basic qualification.</li><li>Three (3) or more years experience as an aviation inspector and a minimum of one year experience on the assigned(MDS) airframe . (UH60, AH64, CH47 )</li><li>Shall be trained and qualified per NAS 410 or ASNT-CP-189 to the level assigned.</li><li>Must be in possession of a U.S. Passport with 3 years of validity remaining at the time of hire and be able to travel internationally.</li><li>Ability to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust.</li><li>** US Citizenship is required to obtain a T1/CAC NACI Clearance.</li><li>Able to clear CENTCOM Medical requirements for deployment.</li><li>Ability to obtain and maintain Iraq Visa</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Job Description: Maintenance Supervisor – Water Cup Production Line Department: Engineering and Maintenance Industry: Packaged Water / Water Cup Manufacturing Employment Type: Full-time Number of Vacancies: 1 Reports To: Factory Manager / Operations Manager Direct Reports: Senior Maintenance Technicians and Mechanical Maintenance Technicians Preferred Nationality: Indian/Iranian Job Purpose Lead the maintenance function for high-speed thermoforming/Form-Fill-Seal water cup production lines.<br> The Maintenance Supervisor will develop maintenance plans, manage the technical team, respond hands-on to major breakdowns, improve machine reliability, and ensure critical spare parts are available.<br> Key Responsibilities Prepare daily, weekly, monthly, quarterly, preventive, and shutdown maintenance plans.<br> Assign maintenance activities and supervise their safe, timely completion.<br> Lead troubleshooting during major breakdowns and recurring machine failures.<br> Conduct root-cause analysis and implement permanent corrective actions.<br> Reduce unplanned downtime and improve equipment reliability and availability.<br> Coordinate maintenance schedules and machine interventions with production.<br> Prepare maintenance checklists, SOPs, equipment histories, and technical reports.<br> Monitor equipment condition and recommend repairs, overhauls, or replacements.<br> Develop critical spare-parts lists for the complete production line.<br> Forecast spare-parts requirements and establish minimum and maximum stock levels.<br> Monitor spare-parts consumption, failure frequency, and component service life.<br> Prepare accurate technical specifications for purchasing spare parts and services.<br> Evaluate the technical suitability of proposed replacement components.<br> Train senior technicians, mechanical technicians, and selected production employees.<br> Ensure compliance with safety, food-hygiene, and lockout/tagout requirements.<br> Maintain proper housekeeping and tool control during maintenance activities.<br> Required Technical Experience Candidates must have direct, hands-on experience maintaining thermoforming/FFS machines that form, fill, and seal water cups, including: Plastic-film feeding, tracking, and tension control Heating and thermoforming stations Forming molds, vacuum systems, and cooling arrangements Water-filling mechanisms, nozzles, pumps, and volume adjustment Lid-film feeding and alignment systems Heat-sealing temperature, pressure, and timing control Cutting, punching, and cup-discharge systems Pneumatic cylinders, valves, regulators, and air preparation Bearings, chains, sprockets, timing belts, shafts, and gearboxes Linear guides, conveyors, lubrication systems, and machine alignment Mechanical synchronization of high-speed production equipment Experience with Thermonox, Beta-Pak, or technically similar high-speed machines is strongly preferred.<br> Required Qualifications Diploma or bachelor’s degree in Mechanical Engineering, Mechatronics, Industrial Maintenance, or a related discipline.<br> Minimum 7–10 years of relevant maintenance experience.<br> Demonstrated supervisory experience in a production environment.<br> Strong mechanical troubleshooting and root-cause-analysis ability.<br> Ability to prepare preventive maintenance plans, SOPs, checklists, and reports.<br> Working knowledge of maintenance KPIs, downtime analysis, and spare-parts control.<br> Ability to read mechanical drawings, manuals, parts diagrams, and specifications.<br> Willingness to work hands-on and respond to breakdowns outside normal hours when required.<br> Critical Selection Requirement General maintenance experience alone is not sufficient.<br> Candidates whose experience is limited to bottled-water filling lines, RO plants, automotive maintenance, building maintenance, utilities, or unrelated factory equipment will not qualify unless they also have substantial direct experience with thermoform/FFS water cup production machines.<br></span> </div>
<p>With general autonomy, has overarching responsibility for investment performance and operations pertaining to Halliburton’s equity and/or commercial ownership in Oil and Gas properties. The Sr. Asset Manager has direct oversight of one or more long term field development projects or a region as well as ultimate accountability for IAM’s performance. Directs and manages the Asset teams, consisting of Asset Operations and teams of geoscience and engineering professionals, who are responsible for managing and developing the field. Major responsibilities include: optimization of existing asset NPV through prudent decisions for continuing operations, investment, development, and technological improvements; acquisition of new Oil and Gas Assets entailing opportunity identification, scoping, technical evaluation, commercialization, drilling, and development to earn either equity or commercial ownership (with specific preference for external funding arrangements and maximized Halliburton PSL content); accountability to Halliburton Executive Management for planning, budget oversight, and P&L performance of Oil and Gas Assets with special emphasis on ethical, safety, environmental and business compliance with Halliburton policies/standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in Petroleum Engineering or Geoscience and a minimum of 20 years of relevant industry experience which includes Oil and Gas deal structuring/negotiation, commercialization, Oil and Gas Accounting practices, onshore and offshore asset management, reservoir / production engineering, well construction, re-completions / workovers, geoscience interpretation, and leading/directing/mentoring technical and non-technical senior managers (professionals with middle management oversight). Superior presentation skills, project management training, and experience working in unconventional plays and offshore shelf areas is required. A strong knowledge of all relevant oil and gas technical disciplines in addition to specific knowledge of certain advanced interpretation and/or engineering methods is required. Halliburton is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation .</p>
<p>The successful candidate will be responsible for supporting electrical operations, maintenance, troubleshooting, and field activities while ensuring compliance with safety standards.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree in Electrical Engineering with a minimum of 2 years of relevant experience; or Technical Diploma in Electrical Engineering with 3 4 years of relevant experience Proven hands-on experience in electrical systems, equipment, and maintenance Strong ability to diagnose, troubleshoot, and resolve electrical faults Experience conducting fieldwork and working directly with electrical systems and equipment Good knowledge of electrical safety standards, procedures, and best practices Strong analytical, problem-solving, and communication skills Willingness and ability to relocate to Najaf, Iraq is essential</p>
<ul><li>Meticulously clean and prepare vehicle surfaces, ensuring a flawless environment for PPF application and PDR.</li><li>Precisely cut and apply Paint Protection Film patterns, achieving seamless coverage and optimal protection.</li><li>Skillfully remove dents and dings using specialized PDR tools and techniques, restoring original body lines.</li><li>Perform detailed inspections of vehicle paintwork to identify imperfections and plan the most effective repair strategy.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>High school diploma or equivalent education.</li><li>Minimum 2-3 years of hands-on experience in both PPF installation and PDR.</li><li>Demonstrated proficiency with a variety of PDR tools, including rods, levers, and glue pulling systems.</li><li>Proven ability to accurately measure, cut, and apply PPF using digital plotters and hand-trimming techniques.</li></ul>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<span>Important Employment Information This role is located in Baghdad and will be hired through a third-party employment provider, as Atlas Copco does not maintain a legal entity or Customer Center in the country. While administrative processes such as contracts and payroll will be handled externally, your day-to-day operations will be fully connected to the Turkiye Customer Center, reporting to the Business Line Manager in Turkiye. Your role As an Area Sales Engineer, your mission is to develop sales and market our products in Baghdat Iraq by leveraging your technical expertise and understanding of customer needs. You will report to the Business Line Manager and work closely with product teams to ensure successful execution of sales strategies. You will: Establish and manage channel partners through the distribution network. Conduct market research and identify opportunities in the assigned region. Generate product requirements and determine regional specifications. Coordinate production timetables, pricing, and plans for product introduction. Develop marketing strategies and manage dealer relationships. Deliver product training and support after-sales activities. Drive sales for Portable Compressors, Handheld Tools, Generators, Pumps, and Light Towers and Aftermarket Products. To succeed, you will need You have: 3+ years of experience working as a Sales Engineer or in a similar technical-commercial role. A university degree in Engineering, Marketing, or Business Management (preferably mechanical, electrical, or industrial engineering) Non-negotiable skills: Strong technical know-how and marketing knowledge. Ability to develop and execute sales strategies, including dealer management and channel development. Fluency in English (written and verbal) and a valid local driving license. Preferred skills: Experience in market research and determining customer needs through data collection and analysis. Ability to recommend product scope, review specifications, and appraise new product ideas or packaging changes. Skilled in competitor analysis and defining product marketing communication objectives. Experience in preparing short- and long-term sales forecasts, special reports, and answering management requests. Ability to manage inventory turnover and product availability through forecasting and production schedule alignment. Expertise in pricing strategies using market research data and cost analysis for customized orders. Familiarity with digitalization tools and platforms for product development, sales, and marketing activities. Strong understanding of product management and value creation principles. Excellent presentation, communication, and relationship-building skills. Advanced computer skills (MS Office) and adaptability to new technologies. Additional responsibilities include: Regular dealer and end-user visits, product training, and after-sales support. Selling and promoting service products (e.g., maintenance parts, kits, lubricants). Building and maintaining strong business relationships with customers and distributors. Maintaining professional and technical knowledge by attending workshops, reviewing publications, and networking. Contributing to team efforts and performing other duties as directed by management. In return, we offer Culture of trust and accountability Lifelong learning and career growth Innovation powered by people Comprehensive compensation and benefits Health and well-being Job location This role is fully remote, enabling you to work from anywhere within the region of Baghdad, while being associated with our customer center in Turkiye.</span> </div>
<p>Minimum 10+ years of experience in finishing works / fit-out, Strong experience in gypsum, painting, tiling, marble, flooring, ceilings, and joinery/carpentry works, Ability to manage subcontractors and site teams, Ability to monitor daily site activities and project schedules, Good knowledge of quality and safety requirements, Ability to coordinate effectively with consultants, technical teams, and subcontractors, International experience, preferably in Iraq, UAE/Dubai, or GCC countries, Strong leadership and team management skills.</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor's degree in Civil Engineering, Architecture, or a related field Good command of English</p><p>Minimum 10+ years of experience in finishing works / fit-out, Strong experience in gypsum, painting, tiling, marble, flooring, ceilings, and joinery/carpentry works, Ability to manage subcontractors and site teams, Ability to monitor daily site activities and project schedules, Good knowledge of quality and safety requirements, Ability to coordinate effectively with consultants, technical teams, and subcontractors, International experience, preferably in Iraq, UAE/Dubai, or GCC countries, Strong leadership and team management skills.</p>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<p><b>Title:</b></p><br><br>Senior Process Safety Engineer<br><br><p><b>Job Description</b></p><br><br><p><b>Job Title: </b>Senior Process Safety Engineer<br><b>Company: </b>KBR<br><b>Location</b>: Basra Iraq<br><b>Employment Type:</b> Full-time, Contract</p><br><br><p>Rotation: 28/28</p><br><br><p>Required Nationals Any</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Job Purpose</b></p><br><br><br><p>Shaping risk management by developing guidelines and leading/participating in safety studies, safety reviews, implementing PSM/HSSE Management, also acting as a consultant for commercial teams and other business partners in the early stages of project development & MOC detailed Risk assessment</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><br><ul><li><span>Provide technical leadership, advice and support in the implementation of Safety Management Systems.</span></li><li><span>Provide HSEQ input in the Risk and Safety studies performed (e.g. HAZOP, HAZID), participate in internal audits, conducts independent safety tours; and support safety improvements, including Root Cause Analysis (RCA) and procedure development, with a particular focus on process safety.</span></li><li><span>Improve process safety awareness across the organization, particularly among engineers and project leaders, through continuous improvement initiatives, Management of Change (MOC), and joint site inspections.</span></li><li><span>Facilitate and participate in P&ID reviews, HEMP, HAZID, HAZOP, SIL, layout safety reviews, PSSR, 3D model reviews, safety audits, QRA workshops, and other relevant process and technical safety studies.</span></li><li><span>Deliver training and actively communicate Process Safety Management (PSM) requirements and related matters to the organization and relevant stakeholders.</span></li><li><span>Coordinate and oversee process safety engineering activities to ensure technical objectives are achieved during new projects, MOCs, and technical studies.</span></li><li><span>Review technical bid submissions and conduct technical bid evaluations and analyses. </span></li><li><span>Participate in EPC contractor and vendor pre-qualification, bid evaluation, and performance evaluation.</span></li><li><span>Ensure the quality and accuracy of EPC contractors' process safety engineering activities and review associated deliverables, including philosophies, layouts, detailed drawings, close-out reports, risk studies, and process safety system documentation.</span></li><li><span>Participate in the commissioning, start-up, and performance testing of new projects, verifying the availability and functionality of Process and Technical Safety Systems.</span></li><li><span>Develop Process Safety Management procedures, monitor their implementation, and evaluate their effectiveness.</span></li><li><span>Develop Technical Supply Specifications, Technical Design Guidelines, and Basis for Design documentation for large-scale MOCs.</span></li><li><span>Support HSE, Process Safety, and Asset Integrity audits and coordinate the planning and implementation of resulting corrective actions.</span></li><li><span>Participate in Process Incidents Investigations.</span></li><li><span>Provide Process and Process Safety technical expertise in Flow Assurance, Hydraulic Calculations, Blowdown Verification, Surge Analysis & Equipment Sizing.</span></li></ul><br><p><b>Technical Qualification & Skills</b></p><br><br><ul><li><span>Minimum Bachelor's degree in Chemical Engineering.</span></li><li><span>15+ of engineering experience in the Oil and Gas industry.</span></li><li><span>10+ years of Process Safety engineering experience or equivalent in the Oil and Gas industry.</span></li><li><span>Experience with Brownfield / Revamp projects.</span></li><li><span>Practical knowledge and experience in HAZOP, LOPA, MOC, Physical Effects Modelling, and Facility Siting.</span></li><li><span>Good knowledge of CCPS/EI Process Safety Management and Risk-Based Process (RBPS) guidelines.</span></li><li><span>PH & RA certifications.</span></li><li><span>Strong knowledge of process safety regulations, standards, and industry practices, including OSHA PSM, EPA RMP, and NFPA requirements</span></li></ul><br><p><b>Soft skills</b></p><br><br><ul><li><span>Excellent analytical, problem-solving, and management skills.</span></li><li><span>Strong communication and interpersonal skills.</span></li><li><span>Ability to work independently and as part of a team.</span></li><li><span>Proficiency in Microsoft Office applications, including Excel, Word, PowerPoint and Outlook.</span></li><li><span>English - upper intermediate proficiency (both verbal & written)</span></li></ul><br><br><br><br> </div>
<h2 class="h5">Job description</h2>
<div class="t-break" data-jb-field="description">
<strong>Role Synopsis</strong><br> <br> The Process Team Lead is a key leadership role within the Maintenance & Engineering (M&E) organization, reporting to the Engineering Manager. The role is accountable for providing expert Process Engineering leadership, technical authority, and sound engineering judgement across operations. Success in this position depends on effective stakeholder management and close collaboration with Operations, Projects, and Subsurface teams.<br> <br> <strong>Key Accountabilities</strong><ul><li>Day-to-day direction and prioritisation of Process Engineering support to deliver safe, reliable, and compliant operations, including discipline leadership of engineers in Area Operations Support team and Maintenance & Engineering team.</li><li>Serve as the Technical Authority for Process Engineering, providing expert support for regional initiatives, major accident risk management, and resolution of complex multidisciplinary technical challenges, and delivery of design changes and engineering queries.</li><li>Act as Engineering Manager delegate for the review and approval of MOCs and EQs as required.</li><li>Lead the development and continuous improvement of practices, procedures, work processes, technologies, and tools.</li><li>Deliver innovative technology/commercial/strategy solutions that underpin extraordinary and significant benefits for the business.</li><li>Provide assurance on engineering compliance with applicable Standards, Specifications, Codes and Regulations. Ensure that non-conformities and temporary deviations are identified.</li><li>Champion the nationalization programme through the development, mentoring, and progression of Iraqi national employees.</li><li>Improve and sustain discipline capability, diversity, and professional development within the Process Engineering team, including managing competency, team size, and recruitment in support of business priorities</li><li>Communicate process lessons learned to the site Operations team, encourage and promote a culture of sharing experience and continuous improvement.</li><li>Lead the prioritization of work and allocation of resources across the discipline. Responsible for the quality of all work performed by the team.</li><li>Lead the resolution of complex, multidisciplinary technical issues where the dominant component is Process Engineering related.</li></ul><br> <strong>Essential experience and job requirements</strong><br> <ul><li>Relevant industry experience in brownfield Operations engineering environments and operational roles across the full value chain of hydrocarbon production facilities</li><li>Candidates should demonstrate a strong understanding of relevant industry P&PS engineering codes, standards, and practices (API, ASME, ISO), and relevant experience with key Process Engineering tools such as Aspen HYSYS, Flare System Analyser, and Pipesim.</li></ul><ul><li>Have the ability to work through all levels of Process Engineering, from detail design reviews to strategic intent.</li><li>Have experience leading a programme to drive behavioural change in process safety culture</li><li>Deep technical and operations expertise in several areas related to the discipline</li><li>Demonstrated ability to network and influence across organisational boundaries</li><li>Comprehensive safety leadership and coaching in all work environments</li><li>Analytical capability for the interpretation of uncertain data using appropriate numerical tools</li><li>Contract and contractor management and development of performance systems/tools and reporting</li></ul><br> <strong>Desirable criteria and qualifications</strong><br> <ul><li>Experienced in the development and delivery of Continuous Improvement projects</li><li>Experienced in application of agile methods for scope development and delivery</li><li>Key skills include communication, interpersonal relationships, facilitation, influencing, and negotiating</li><li>Ability to develop others and foster diverse relationships in a multicultural environment</li><li>Ability to identify correct priorities of maintenance and engineering support activities</li><li>Ability to identify and assess safety hazards; seeing what others may not: speaking up, early recognition of risks, opportunities and solutions – in particular when working outside of familiar technologies, codes and standards.</li></ul><strong>Other Requirements</strong><br> <ul><li>A passion and relentless drive for continuous improvement</li><li>Strong use of IT systems to analyse data and produce reports, KPIs, etc.</li><li>Strong interpersonal skills with experience influencing operating teams and contractors</li><li>Strong cultural awareness</li><li>Able to prioritise work in a high activity environment</li><li>Strong bias for being proactive and getting results</li><li>Demonstrated planning, organizational, and communication skills</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil & Gas, Power & Renewables, Chemicals, Construction & Infrastructure, Life Sciences, Mining and Manufacturing sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>
Receive email alerts for Copper Technician Jobs in Iraq jobs
You can cancel your email alert at anytime