Limousine Drivers Jobs in Iraq

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Balad, Iraq*** Under the supervision of the Firefighter Crew Chiefs, the Firefighter responds to multiple-types of emergencies operating as a firefighter. Maintains vehicles, equipment, tools, and protective clothing in a serviceable condition. Extinguish fires and takes precautions to prevent fire rekindling. Operates pumps, foam generators, turrets, nozzles, and other firefighting tools and equipment. Exercises caution to avoid personal injury and property damage and comply with strict health and safety standards. At the site of a fire protects and preserves evidence indicating the cause of the fire. Properly wears personal protective clothing. Conducts and take part in frequent reoccurring proficiency training, OJT and maintains required certifications. Performs other duties as assigned. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Participates as a positive team member and understands and conforms to the LOGCAP V contract Performance Work Statement. + Actively participates and maintains a safe workplace, ensuring safety is the highest priority. + Complies with all Environmental, Health, and Safety (EHS) and Quality Assurance (QA) requirements and goals. + Maintains documentation as necessary to meet these requirements. + Ensures emergency equipment is operational and in a state of readiness as required by NFPA or other industry standards. + Maintains and clean personal protective equipment and works as an effective team member in cleaning equipment and facilities. + As part of a team conducts fire inspections, pre-incident planning and ensures that facilities are safe and documentation is recorded and tracked. + Operates computerized digital fire alarm receiving equipment including two-way radio communications equipment. + Performs additional property control and logistical duties in support of fire department operations to include, maintaining accountability of equipment, scheduling maintenance of equipment, coordinating appointments of subordinates, and other administrative duties as needed. + Serves as a team member on a rescue unit, ladder truck, engine company, water tender, or airport ARFF apparatus. + Enters burning or contaminated structures, vehicles, and other immediately dangerous to life and health areas to fight fires and/or perform rescues while wearing required personal protective equipment. + Acts as a crew member for structural fires, aircraft fires, rescue operations, medical emergencies, hazardous materials responses and other emergency events as directed in accordance with process and procedures identified in the department, standard operating procedures. + Performs duties in support of organizational metrics. + Adequately and honestly tracks all data related to metrics. + Provides direct support to the achievement of all metrics related to the LOGCAP V. + Attends meeting in the absence of the supervisor or as needed. + Communicates professionally both orally and in writing with team members and others, as needed, to relay information necessary for job success. + This includes, but is not limited to, performance appraisals, job requirements, division metrics, projects, quality standard procedures, and safety practices. + Performs other duties as required. + This position description is subject to change at any time as needed to meet the requirements of the program or company. Qualifications + Minimum Qualifications: + Education/Certifications: + One-year related experience may be substituted for one year of education, if degree is required. + Must be CAC eligible and/or able to obtain a Common Access Card (CAC) + Must be able to pass annual firefighter Occupations Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583 + Must be available for recall. + Required to have IFSAC or Pro-Board Certification to these levels: Hazardous Materials Awareness and Operations, Fire Fighter II, Airport Firefighter (ARFF), Driver Operator Pumper and Driver Operator ARFF, Mobile Water Supply, CPR &amp; First Aid Responder and Telecommunicator II. + Experience: + Minimum Five (5) years experience as a Fire Fighter working on a DOD Installation. + OCN Qualifications/Experience Requirements: + Minimum five (5) Years of Fire Fighter Experience working on a DOD installation. + Required to have IFSAC or Pro-Board Certification to these levels: Hazardous Materials Awareness and Operations, Fire Fighter II, Driver Operator Pumper, + Required to have Hazmat Technician Certification + Airport Firefighter certification received with in six months of hire date preferred + Airport Firefighter and ARFF Driver Operator certification required + Must be able to read/write and speak English. + Skills: + Possess the ability to demonstrate firefighter knowledge and skills in a professional manner. + Ability to work effectively with fellow employees and management personnel at all levels to include multinational staff, and military officials. + Strong ability to exercise professional discretion and good judgment and to understand the effect of decisions made. + Exhibit strong interpersonal skills and ability to communicate in English both verbally and writing and must have good computer skills in MS-Word, MS-Excel, and MS- Outlook. + Working Conditions: + Duties will involve the conduct of work in the outdoors with a potential exposure to extreme climatic conditions including frequent dust storms and high temperatures up to 130 degrees in the summer months. + Potential exposure to chemical or biological agents could exist. + Employee use of personal protective equipment (PPE) in certain areas is required. + Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire Department, company, and Army safety policies. + Must be able to respond and work in all types of weather and in less than ideal conditions and may have to enter hazardous environments. + Must be able climb ladders to gain access to upper levels of buildings or to rescue individuals from burning structures or when trapped. + Physical Requirements: + Must meet or exceed physical requirements contained in the current edition NFPA 1582, including but not limited to the physical strength and ability to perform heavy and strenuous tasks for extended periods of time under dangerous and uncomfortable conditions, often while wearing bulky protective gear, including self-contained breathing apparatus. + Must be available for recall and manage personnel issues off duty. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Perform overhaul, maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have:</p><p>Education: High School diploma</p><p>Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience</p><p>Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant.</p><p>Security Clearance: Able to obtain and maintain a Secret Clearance.</p><p>Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq</p><p>Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass CRC to deploy.</p><p>Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation</p><p>Certifications Section 608 Technician Certification EPA is a plus</p><p></p></section>

<p>The Air Crew Life Support Technician will perform inspections, maintenance and troubleshooting tasks on T-6A aircraft. Essential Responsibilities but not limited to:</p><ul><li>Perform launch, recovery, scheduled and unscheduled inspections/maintenance.</li><li>Preflight/thru flight/BPO inspections, ground handling, minor maintenance, and servicing.</li><li>Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance.</li><li>Services aircraft. Performs end-of-runway, post-flight, preflight, thru-flight, and phase inspections.</li><li>Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components.</li><li>Performs inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures.</li><li>Services, operates, and maintains ground support equipment and performs interior and exterior cleaning of aircraft and work areas. Must precisely complete all maintenance documentation.</li><li>Perform all other position related duties as assigned or requested.</li></ul><p>Minimum Position Knowledge, Skills, and Abilities Required:</p><ul><li>Must have a current FAA Airframe and Powerplant (A&amp;P) license in good standing.</li><li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li><li>Experience with OBOGS systems and T-6 Life support required.</li><li>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</li><li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Possess a current state issued driver s license.</li><li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</li><li>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</li></ul><p>Work Environment, Physical Demands, and Mental Demands:</p><ul><li>Must possess the ability to carry and lift overhead up to 50 pounds.</li><li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li><li>Must be able to work at high altitudes when performing flight attendant duties.</li><li>Work is primarily performed outside in a high-level noise environment.</li><li>Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Must have a current FAA Airframe and Powerplant (A&amp;P) license in good standing.</p><p>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</p><p>Experience with OBOGS systems and T-6 Life support required.</p><p>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</p><p>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</p><p>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</p><p>Possess a current state issued driver s license.</p><p>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</p><p>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</p><p>Must possess the ability to carry and lift overhead up to 50 pounds.</p><p>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</p><p>Must be able to work at high altitudes when performing flight attendant duties.</p><p>Work is primarily performed outside in a high-level noise environment.</p><p>Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</p>

<p>The Air Crew Life Support Technician will perform inspections, maintenance and troubleshooting tasks on T-6A aircraft. Essential Responsibilities but not limited to: Perform launch, recovery, scheduled and unscheduled inspections/maintenance. Preflight/thru flight/BPO inspections, ground handling, minor maintenance, and servicing. Perform routine troubleshooting, installation, repair and maintenance of all electro-mechanical systems and components on the aircraft at the organizational level of maintenance. Services aircraft. Performs end-of-runway, post-flight, preflight, thru-flight, and phase inspections. Troubleshoots and maintains aircraft structures, systems, components, and related equipment. Removes and installs aircraft components. Performs inspections, scheduled and unscheduled maintenance on the company aircraft in accordance with FAA regulations, manufacturer and company maintenance manuals and procedures. Services, operates, and maintains ground support equipment and performs interior and exterior cleaning of aircraft and work areas. Must precisely complete all maintenance documentation. Perform all other position related duties as assigned or requested.</p><p>Must have a current FAA Airframe and Powerplant (A&amp;P) license in good standing. At least four (4) years of directly related heavy aircraft maintenance experience is highly desired. Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs. Experience with OBOGS systems and T-6 Life support required. 2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required. Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components. Must be able to inspect, repair, and operate ground support and auxiliary equipment. Possess a current state issued driver s license. Must be able to obtain and maintain U.S. passport for facility credentials/authorization. NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</p><p>Must possess the ability to carry and lift overhead up to 50 pounds. Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft. Must be able to work at high altitudes when performing flight attendant duties. Work is primarily performed outside in a high-level noise environment. Performing maintenance in low-light areas, operating support equipment after daylight hours. Work is occasionally performed in inclement weather.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Must have a current FAA Airframe and Powerplant (A&amp;P) license in good standing.</li><li>At least four (4) years of directly related heavy aircraft maintenance experience is highly desired.</li><li>Experience must include complying with all applicable aircraft servicing procedures, aircraft maintenance manuals and parts catalogs.</li><li>Experience with OBOGS systems and T-6 Life support required.</li><li>2.5 Years Textron T6 Texan II aircraft maintenance experience with in the last 5 years required.</li><li>Must read, interpret and use manufacturers and aircraft maintenance manuals, service bulletins, blueprints, wiring/schematic diagrams, data tables and other specifications to determine feasibility and method to repair or replace malfunctioning or damaged components.</li><li>Must be able to inspect, repair, and operate ground support and auxiliary equipment.</li><li>Possess a current state issued driver s license.</li><li>Must be able to obtain and maintain U.S. passport for facility credentials/authorization.</li><li>NOTE: U.S. citizenship is required for facility credentials/authorization at this work site.</li><li>Must possess the ability to carry and lift overhead up to 50 pounds.</li><li>Duties include walking, climbing, standing, stooping, stretching, and squatting for purposes of moving equipment, boarding and de-boarding the aircraft, performing maintenance using ladders, and performing maintenance atop and below aircraft.</li><li>Must be able to work at high altitudes when performing flight attendant duties.</li><li>Work is primarily performed outside in a high-level noise environment.</li><li>Performing maintenance in low-light areas, operating support equipment after daylight hours.</li><li>Work is occasionally performed in inclement weather.</li></ul>

<p>What s On Your Plate? Restaurant Training including installation of Talabat system at partner locations Ensures &amp; improves the restaurant s operation and increase the order acceptance rate, reduce vendor delay Implement new configurations to support operations Proactively liaise with Restaurants, investigating and resolving restaurant issues in a timely manner Identify causes of operational issues as well as symptoms, diagnosis, and cure Collaborative problem solving with many different stakeholders in the business:, Account management, Driver operations, Customer Service, etc Restaurant Performance Data Analysis &amp; Reporting Scheduling and carrying out training with new and existing restaurant partners, troubleshooting and Tech Replacement</p><p><strong>Desired Candidate Profile</strong></p><p>Bachelor s Degree 0-2 years experience in operations or logistics. food/grocery tech industry is highly desirable The ability to quickly adapt to new environment and systems so you can hit the ground running A highly organized and detail-oriented with an analytical mindset Advanced Excel and Data Interpretation Skills Strong communication skills, both written and verbal</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">EPP III, Generator (3 - 150KW) and HVAC Technician SWA (Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq) Perform troubleshooting, diagnostics, maintenance, and services on all types of military and commercial generators and HVAC systems used by the U.S. Army to include the 150kW EPP III generators. MEANINGFUL WORK AND PERSONAL IMPACT As a Generator and HVAC Mechanic, the work you ll do at GDIT will be impactful to the mission of the Worldwide Field Support contract for the U.S. Army. You ll play a crucial role in providing on-site technical and maintenance assistance, analyzing complex technical problems, and providing training to site operations and maintenance personnel. Perform maintenance and sustainment support on 3kW to 150kW, 500 0hz generators involving installation and removal of generators from fixed and mobile locations, troubleshoots and repair alternating current (AC) systems, direct current (DC) systems, electronic control systems and other program logic controls, electrical wiring and accessories. Troubleshoot and repair HVAC, Chillers, and Environmental Control Units some are standalone units and others are mounted on trailers and vehicles. Maintain all types of commercial power generation equipment; military spec generators and Uninterrupted Power Systems (UPS). Operate a Load bank during testing Fabricate wire harnesses and solder terminals. Some work will be in a generator shop environment, and some work will be in a field environment. Other duties as assigned. WHAT YOU LL NEED TO SUCCEED Bring your Generator and HVAC expertise along with a drive for innovation to GDIT. The Generator and HVAC Mechanic must have: Education: High School diploma Experience: BA/BS plus 2 years experience, AA/AS/plus 4 years experience, or a High School diploma and 7 years experience Technical skills: Extensive diesel generator experience. Knowledge of generator parallel systems and switch gear. Experience with brazing copper tubing and evacuating and recharging refrigerant. Security Clearance: Able to obtain and maintain a Secret Clearance. Travel to Bahrain, UAE, Saudia Arabia, Kuwait, Jordan, Iraq Role requirements: US passport must not expire for at least 2 years, valid US driver s license, and an international driver s permit (AAA). Ability to pass medical/CRC to deploy. Skills Generator Repair HVAC Repair/Troubleshooting Generator Troubleshooting Power Generation Certifications Section 608 Technician Certification EPA is a plus GDIT IS YOUR PLACE At GDIT, the mission is our purpose, and our people are at the center of everything we do. Growth: AI-powered career tool that identifies career steps and learning opportunities. Support: An internal mobility team focused on helping you achieve your career goals. Rewards: Comprehensive benefits and wellness packages, 401K with company match, and competitive pay. Community: Award-winning culture of innovation and a military-friendly workplace.</div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Planning Engineer-(EPCM)-Onsite<br><br><p><b>Job Description</b></p><br><br><br><p><b>Job Title Planning Engineer</b></p><br><br><p><b>Reports to Project Control Manager</b></p><br><br><p><b>Skillpool Project Services</b></p><br><br><p><b>Company: </b>KBR-Iraq<br><b>Project: </b>EPCM<br><b>Location</b>: Basra, Iraq<br>Rotation: 28/28</p><br><br><p>Required: Local National</p><br><br><br><p><b>About Company</b></p><br><br><p><i><u>"Belong, Connect, Grow, with KBR!</u></i></p><br><br><br><p><i>The KBR team delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></p><br><br><br><p><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></p><br><br><br><p><b>Roles and Responsibilities:</b></p><br><br><br><p><b>The Planning Engineer will report to the Project Control Manager. </b></p><br><br><p><b>Specific responsibilities include:</b></p><br><br><ul><li>Developing and maintaining Project Execution Schedules including Level 1/2/3 schedules using tools like Primavera P6. Ensure alignment on project assumptions with cost engineering, cost estimation, risk management and project management.</li><li>Implement Schedule requirements of Company into the planning and cascade these to the contractors accordingly.</li><li>Coordinate with engineering, procurement, and construction teams to gather inputs for the master schedule.</li><li>Monitor progress and update schedules regularly to reflect actual performance.</li><li>Identifying trends or potential slippages and report on these to the Project Engineers or the Project Services Lead.</li><li>Producing regular reports on progress against schedule. Reporting schedule performance index (SPI)</li><li>Deliver and maintain consistent and realistic plans and control structures for the project. Understand the list of plans required to execute the assigned project sub-elements and their interface to other sub-elements. Develop the activities, durations as per productivity norms, logic, resources and progress for the assigned project sub-elements, leading to the creation of the baseline schedule and its subsequent maintenance.</li><li>Develop, implement and comply with the planning and progress monitoring procedures.</li><li>Conduct the schedule monthly progress update, forecast, critical path and trend analyses for assigned elements, including any impact from interface areas. Implement and maintain the status reports. Provide regular and comprehensive schedule status reports to project engineers.</li><li>Liaise with and challenge Project Engineering personnel to ensure proper understanding of the key schedule sensitivities and drivers.</li><li>Develop contract key dates, milestones and Project Hub plan dates that align with the overall project schedule.</li><li>Participate in evaluating bid schedules and reviewing and assessing contractor plans to support contract award recommendations.</li><li>Develop contract sections for planning and progress monitoring and reporting. Review, verify, assess contractors reported progress and ensure that this is reflected in the project schedule.</li><li>Contribute to the translation of the project’s risk profile into the probabilistic risk model and understand the output, including the key risk drivers for the possible range of schedule completion dates. Track the criticality of the main paths to completion and float consumption.</li><li>Provide input data for and participate in benchmarking activities.</li><li>Contribute to close-out data to enable knowledge retention (lessons learned, project data compilation) at completion of work</li></ul><br><p><b>Education, Skills &amp; Experience:</b></p><br><br><p><b>Education</b></p><br><br><p>Bachelor’s Degree or Diploma in an any discipline</p><br><br><p><b>Experience and Skill set</b></p><br><br><ul><li>Minimum 8 years experience in Oil and Gas Industry in Planning Engineer roles.</li><li>Minimum 5 years experience in Oil and Gas related project delivery related projects</li><li>Ability to work and manage in a multi-cultural environment with good understanding of cost estimation parameters to be considered in Middle East.</li><li>Skill to actively engage with different project disciplines</li><li>Ability to work and manage in a multi-cultural environment</li></ul><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>What’s On Your Plate?</strong></p><br><br><ul><li><p>Restaurant Training including installation of Talabat system at partner locations</p><br><br></li><li><p>Ensures &amp; improves the restaurant’s operation and increase the order acceptance rate, reduce vendor delay</p><br><br></li><li><p>Implement new configurations to support operations</p><br><br></li><li><p>Proactively liaise with Restaurants, investigating and resolving restaurant issues in a timely manner</p><br><br></li><li><p>Identify causes of operational issues as well as symptoms, diagnosis, and cure</p><br><br></li><li><p>Collaborative problem solving with many different stakeholders in the business:, Account management, Driver operations, Customer Service, etc</p><br><br></li><li><p>Restaurant Performance Data Analysis &amp; Reporting</p><br><br></li><li><p>Scheduling and carrying out training with new and existing restaurant partners, troubleshooting and Tech Replacement</p><br><br></li></ul><br>What you need to be successful<br><p><strong>What Did We Order?</strong></p><br><br><ul><li><p>Bachelor’s Degree</p><br><br></li><li><p>0-2 years’ experience in operations or logistics. food/grocery tech industry is highly desirable</p><br><br></li><li><p>The ability to quickly adapt to new environment and systems so you can hit the ground running</p><br><br></li><li><p>A highly organized and detail-oriented with an analytical mindset</p><br><br></li><li><p>Advanced Excel and Data Interpretation Skills</p><br><br></li><li><p>Strong communication skills, both written and verbal</p><br><br></li></ul><br>Who we are<br><p>talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in over 70+ countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <br>About the opportunity<br><p><strong>What’s On Your Plate?</strong></p><br><br><ul><li><p>Restaurant Training including installation of Talabat system at partner locations</p><br><br></li><li><p>Ensures &amp; improves the restaurant’s operation and increase the order acceptance rate, reduce vendor delay</p><br><br></li><li><p>Implement new configurations to support operations</p><br><br></li><li><p>Proactively liaise with Restaurants, investigating and resolving restaurant issues in a timely manner</p><br><br></li><li><p>Identify causes of operational issues as well as symptoms, diagnosis, and cure</p><br><br></li><li><p>Collaborative problem solving with many different stakeholders in the business:, Account management, Driver operations, Customer Service, etc</p><br><br></li><li><p>Restaurant Performance Data Analysis &amp; Reporting</p><br><br></li><li><p>Scheduling and carrying out training with new and existing restaurant partners, troubleshooting and Tech Replacement</p><br><br></li></ul><br>What you need to be successful<br><p><strong>What Did We Order?</strong></p><br><br><ul><li><p>Bachelor’s Degree</p><br><br></li><li><p>0-2 years’ experience in operations or logistics. food/grocery tech industry is highly desirable</p><br><br></li><li><p>The ability to quickly adapt to new environment and systems so you can hit the ground running</p><br><br></li><li><p>A highly organized and detail-oriented with an analytical mindset</p><br><br></li><li><p>Advanced Excel and Data Interpretation Skills</p><br><br></li><li><p>Strong communication skills, both written and verbal</p><br><br></li></ul><br>Who we are<br><p>talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in over 70+ countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br> <br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> Company Description<br><p>talabat is part of the Delivery Hero Group, the world’s pioneering local delivery platform, our mission is to deliver an amazing experience—fast, easy, and to your door. We operate in over 70+ countries worldwide. Headquartered in Berlin, Germany. Delivery Hero has been listed on the Frankfurt Stock Exchange since 2017 and is part of the MDAX stock market index.</p><br><br>Job Description<br><p><strong>What’s On Your Plate?</strong></p><br><ul><li><p>Restaurant Training including installation of Talabat system at partner locations</p><br></li><li><p>Ensures &amp; improves the restaurant’s operation and increase the order acceptance rate, reduce vendor delay</p><br></li><li><p>Implement new configurations to support operations</p><br></li><li><p>Proactively liaise with Restaurants, investigating and resolving restaurant issues in a timely manner</p><br></li><li><p>Identify causes of operational issues as well as symptoms, diagnosis, and cure</p><br></li><li><p>Collaborative problem solving with many different stakeholders in the business:, Account management, Driver operations, Customer Service, etc</p><br></li><li><p>Restaurant Performance Data Analysis &amp; Reporting</p><br></li><li><p>Scheduling and carrying out training with new and existing restaurant partners, troubleshooting and Tech Replacement</p><br></li></ul><br>Qualifications<br><p><strong>What Did We Order?</strong></p><br><ul><li><p>Bachelor’s Degree</p><br></li><li><p>0-2 years’ experience in operations or logistics. food/grocery tech industry is highly desirable</p><br></li><li><p>The ability to quickly adapt to new environment and systems so you can hit the ground&nbsp; &nbsp; running</p><br></li><li><p>A highly organized and detail-oriented with an analytical mindset</p><br></li><li><p>Advanced Excel and Data Interpretation Skills</p><br></li><li><p>Strong communication skills, both written and verbal</p><br></li></ul><br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><strong>Overview</strong> <br> <br> <p> <strong>***This position is physically located in Iraq in support of LOGCAP***</strong> </p> <p> </p> <p>Under the supervision of Fire Prevention Lead, the Fire Inspector p<span>lans, organizes, and conducts fire prevention activities throughout to include fire inspections, fire investigations, public education, plan reviews, and fire protection system acceptance inspections. Assist implements the Fire Prevention Program to ensure compliance with Performance Work Statement, Army Regulation 420-1, DoDI 6055.06, Unified Facilities Criteria (UFC), policies, and National Fire Protection Association (NFPA) standards.</span> </p> <br> <strong>Responsibilities</strong> <br> <br> <p> <em>This position description is subject to change at any time as needed to meet the requirements of the program or company.</em> </p> <ul> <li>Conducts inspections and maintains documentation of all facility fire inspections.</li> <li>Performs plan reviews to ensure fire protection systems are IAW with policies and UFC s guidance.</li> <li>Participates and maintains the fire extinguisher exchange program for facilities.</li> <li>Conducts Facility Manager, Fire Warden and other fire prevention training.</li> <li>Works with DPW, conducts final acceptance inspections on new construction, and renovation projects.</li> <li>Maintains appropriate documentation on the inspection and testing of sprinkler systems.</li> <li>Participate in Environmental Safety and Health (ESH) programs.</li> <li>Helps formulate long range goals related protection of personnel, facilities, materials, and equipment.</li> <li>Assists with fire investigations as required under AR 420-1 specifications.</li> </ul> <br> <strong>Qualifications</strong> <br> <br> <ul> <li> <strong>Minimum Qualifications</strong>: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required.<ul> <li>High School Diploma.</li> <li>Associate degree in Fire Science from an accredited college preferred</li> <li>Must be IFSAC or Proboard certified</li> <li>Must have a Fire Inspector I certification</li> <li>Must have a Fire Instructor I certification</li> <li>Must have a HazMat Operations certification</li> <li> </li> <li>A valid driver s license and the ability to obtain a U. S. Government Motor Vehicle Operator s License and host nation Driver s License, is required.</li> </ul> </li> <li> <strong>OCN Qualifications/Experience Requirements:</strong> <ul> <li>High school diploma or equivalent</li> <li>Must be IFSAC or Proboard certified</li> <li>Must have a Fire Inspector I certification</li> <li>Must have a Fire Instructor I certification</li> <li>Must have a HazMat Operations certification</li> <li>Must be able to read, speak and write English fluently</li> </ul> </li> <li> <strong>Experience:</strong> <ul> <li>Required: 5 years of related work experience.</li> <li>Preferred: Fire inspector experience as a Fire Prevention Specialist, US Military, DOD, or civilian</li> <li>Highly Desirable: Certifications as a Fire Investigator and/or Plans Reviewer</li> </ul> </li> <li> <strong>Skills:</strong> <ul> <li>Be able to work with minimum supervision.</li> <li>Must possess strong written and spoken communication skills and general word processing and computer skills.</li> <li>Must have knowledge of occupancy classification types, the fire hazards present in various occupancies, and the occupant load factors relating to various occupancy classifications.</li> <li>Knowledge of fire department mission and organization; safety requirements and objectives; fire alarm and communications; fire behavior; portable fire extinguishers; personal protective clothing and equipment, water supplies and sprinklers; hazardous materials; fire prevention and public fire education; and fire cause determination</li> </ul> </li> <li> <strong>Working Conditions:</strong> <ul> <li>Must be capable of working in an extreme weather conditions with temperatures exceeding 120 degrees Fahrenheit.</li> <li>Indoor and/or outdoor environment with very adverse and harsh conditions (i.e., hot, dry, duty, desert environment with average temperatures of 30 degrees in the winter and 130 degrees in the summer months).</li> <li>Includes some industrial production environment conditions as well.</li> </ul> </li> <li> <strong>Physical Requirements:</strong> <ul> <li>Light work. Exerting up to 20 pounds of force occasionally, and/or up to 10 pounds of force frequently, and/or a negligible amount of force constantly to move objects. If the use of arm and/or leg controls requires exertion of forces greater than that for sedentary work and the worker sits most of the time, the job is rated for light work.</li> <li>Employee use of personal protective equipment (PPE) is required for some situations. PPE includes, but is not limited to, head, foot, torso, respiratory, vision, and hearing protective devices.</li> <li>Must comply with all Fire and Safety Regulations and post policies.</li> </ul> </li> </ul> At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Monitoring and documenting agent communication and transactions in support of the company and departmental quality goals and initiatives. Evaluates both verbal and written customer contacts with agents. The Quality Auditor will fairly and consistently review the calls and emails of agents for accuracy and coach each agent for success in executing superior service and quality to our customers. Monitor Agents calls and review other interactions &amp; emails for accuracy of information and call handling standards Ensure that Agents are delivering a high level of customer service through the use of call driver analysis, repeat caller analysis and other data consolidation tools Verify that agents are providing accurate solutions to customers Record evaluations utilizing departmental quality monitoring forms Deliver coaching feedback to supervisors and/or agents on call and email performance Provide Supervisors and Managers with regular performance feedback on the agents Perform root cause analysis and report to management Completes assigned reports within the agreed time frames. Analyze all reports to identify trends and areas of development and be proactive about offering solutions. Participates in the design of quality monitoring forms and quality standards Conducting Calibration sessions with supervisors and management Conducting counter audits to ensure the effectiveness of processes &amp; procedures Transcribing calls for management and/or legal where required Complete all work to the highest possible level including up to date knowledge of all programmes being evaluated. Facilitates customer experience alignment sessions with CC staff. Assisting the Quality department and other business units in continual improvement initiatives to align with best and current business practice. Monitor other functional teams like Social Media, Back Office... etc. Assist in new hired with the quality processes and procedures. Appropriately responding to ad-hoc requests from various business units. Provides positive and constructive feedback of monitored staff that could possibly be used in coaching sessions to rectify errors and prevent further inconsistencies/inefficiencies. Will participate in collaborations with the training team, leads and management team monthly to ensure agents are educated and prepared to be successful</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor Degree or Diploma degree Prior call center experience is mandated Customer Service Orientation Attention to Detail Process Improvement Effective Communication Proficient language skill according to CC Site demands (ArabicEnglish for Arabic regions) Ability to write routine reports and correspondence Proficient in Word, Excel and PowerPoint for presentations and reports required Strong written and verbal communication skills. Excellent grammar, spelling, and sentence construction Exceptional listening and analytical skills Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change. Technical Competencies: Customer Communication Local Language Knowledge Capturing the Voice of the Customer (VoC) Service Quality Monitoring &amp; Compliance Complaint Management &amp; Resolution Cross-Selling Internal Audit Planning &amp; Execution Knowledge Base Management.</p><p></p></section>

<p>The primary responsibility of the Steam/Gas Mechanic is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Dismantle, assemble, move and align, machinery and equipment using: hoists, cranes, chain falls, hand tools, power tools, pneumatic and hydraulic tools, micrometers, rules, squares, plumb bobs, dial indicators and/or laser alignment equipment</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects</li><li>Load, transport, and unload materials, tools, equipment and supplies and perform mechanical and electrical maintenance and repairs as needed</li><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum of one (1) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines</li><li>Valid Driver s License</li></ul><p>Preferred:</p><ul><li>Degree/Associate Degree in Technical Field or Gas Turbine Systems</li></ul><p>Desired Characteristics:</p><ul><li>Ability to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Proficient in the following: mechanical/technical skills, oral communications skills, Critical Thinking</li><li>Manage time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span></span><p><span>At Julphar, we are on a journey of culture transformation &amp; our mission is to provide a better quality of life for the entire family by delivering best in class solutions and real value with compassion and professionalism.</span></p><br> <p><span>Our core values: Respect, Collaboration, innovation, Integrity and Compassion - Combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to make a positive impact on the lives of the patients we serve, enable Talents , create a healthy work environment, and accomplish our goals through world-class research and with the compassion and commitment of our employees.</span></p><br> <p><strong>Strategic Portfolio Manager, Job Description</strong></p><br> <p><strong>Job Summary/Main Purpose</strong></p><br> <p>As member of the Portfolio Strategy team, the Portfolio Manager is responsible for the strategic direction and optimization of Julphar's product portfolio, ensuring alignment with long-term organizational goals and market trends.</p><br> <p>Working closely with the portfolio managers in the commercial team along with other stakeholders in identifying strategic growth opportunities and driving high-impact pipeline products and initiatives.</p><br> <p><strong>Main Responsibilities</strong></p><br> <p><strong>Strategic Portfolio Leadership</strong></p><br> <ul> <li>Develop and implement comprehensive long-term portfolio plans, aligning them with overall business objectives.</li> <li>Ensure the portfolio is strategically positioned for future growth and success, anticipating market shifts and progressing opportunities.</li> <li>Proactively adjust the portfolio based on in-depth market trends and performance insights.</li> <li>Develop country specific product portfolio strategies</li> <li>Evaluate and define strategies for portfolio tail end</li> <li>Secure brand lifecycle management for key strategic products within critical disease areas, collaborating closely with the commercial team to maximize their strategic value.</li> <li>Lead and coordinate with cross-functional teams to execute critical, portfolio-related projects that drive strategic objectives.</li> </ul> <p><strong>Strategic Market Analysis &amp; Insights</strong></p><br> <ul> <li>Conduct advanced market analysis to identify and capitalize on significant opportunities for portfolio expansion and diversification on global, regional and country specific level.</li> <li>Analyse competitor activities and broader market trends to drive critical, high-level portfolio decisions and strategic pivots.</li> <li>Provide insights and strategic recommendations derived from comprehensive market research, guidelines and trends.</li> </ul> <p><strong>Executive Stakeholder Collaboration, Project Management &amp; Alignment</strong></p><br> <ul> <li>Manage specific strategic projects and high-impact initiatives within the portfolio, ensuring their timely completion to achieve strategic goals.</li> <li>Collaborate extensively with internal stakeholders to ensure deep alignment on portfolio strategy and its execution across the organization.</li> <li>Communicate strategic portfolio updates and key performance metrics to relevant executive teams, ensuring transparency and shared understanding.</li> <li>Proactively address stakeholder concerns and ensure their strategic needs are met, fostering strong collaborative relationships.</li> </ul> <p><strong>Strategic Performance &amp; Growth Trajectory</strong></p><br> <ul> <li>Track the performance of portfolio products against pre-agreed strategic Key Performance Indicators (KPIs), focusing on long-term Objectives and value creation.</li> <li>Provide regular, insightful performance reports to senior management, highlighting strategic implications and future opportunities.</li> <li>Identify strategic areas for improvement to optimize portfolio performance and market positioning.</li> </ul> <p><strong>Requirements (Knowledge, Skills &amp; Attributes)</strong></p><br> <p><strong>Education</strong></p><br> <ul> <li>Bachelor’s degree in medicine, Pharmacy, or a related field; MBA or advanced degree preferred.</li> </ul> <p><strong>Experience</strong></p><br> <ul> <li>Minimum of 4 years in strategic pharma portfolio management or related strategic roles, with a proven track record of driving portfolio growth and strategic initiatives.</li> <li>Knowledge and experience with biologics and biosimilar portfolio and specialty and rare diseases will be a plus</li> </ul> <p><strong>Knowledge</strong></p><br> <ul> <li>Profound understanding of pharmaceutical market dynamics, emerging disease and therapy trends, and strategic foresight.</li> <li>In-depth knowledge of regulatory requirements and advanced market access strategies of the MENA markets.</li> <li>Familiarity with strategic project management principles and best practices.</li> </ul> <p><strong>Skills</strong></p><br> <ul> <li>Strong analytical and strategic problem-solving skills, with the ability to translate complex data into actionable portfolio strategies.</li> <li>Superior communication and interpersonal skills, capable of influencing senior stakeholders and leading cross-functional teams.</li> <li>Demonstrated ability to strategically manage multiple complex projects and competing priorities simultaneously.</li> <li>High proficiency in advanced data analysis and strategic market research methodologies.</li> </ul> <p><strong>Attributes</strong></p><br> <ul> <li>Results-oriented with a strong focus on achieving strategic objectives and long-term portfolio success.</li> <li>Ability to work collaboratively and lead cross-functional teams in a strategic, results-driven environment.</li> <li>Proactive, adaptable, and innovative approach to managing complex portfolio challenges and opportunities.</li> </ul> <p>Strong organizational and time management skills, prioritizing initiatives for maximum impact.</p><br><p><span>We value people from different backgrounds. Could this be your story? Apply today or visit&nbsp;www.Julphar.net&nbsp;to read more about us and the journey of Julphar</span></p><br> </div>

<p>The primary responsibility of the Mechanic Steam and Gas - is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures.</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments.</li><li>Dismantle and assemble machinery and equipment using a variety of hand, power, pneumatic and hydraulic tools.</li><li>Perform mechanical and electrical maintenance and repairs on power tools, hand tools and training equipment.</li><li>Move machinery and equipment using hoists, cranes, chain falls and trucks.</li><li>Align machinery and equipment using hoists, squares, rules, micrometers, plumb bobs, dial indicators and/or laser alignment equipment.</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches.</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects.</li><li>Load, transport, and unload materials, tools, equipment and supplies.</li><li>Availability to travel and be away from home for extended periods of time</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree or associate degree in Technical Field, Gas Turbine Systems Technician preferred</li><li>Must have a minimum of two (2) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines.</li><li>Must have experience performing equipment alignments using either laser or traditional methods.</li><li>Must have Driver s License</li><li>Must possess minimum required hand tools.</li></ul><p>Desired Characteristics:</p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Has solid skills acquired with trainings and required to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Good mechanical/technical skills.</li><li>Good oral communication skills and critical thinking ability.</li><li>May be required to handle time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>This position is located in Erbil. Purpose and Scope: The Site Manager has overall responsibility for cost, schedule and technical performance of the operation. Accountable for production, supply, production control/planning and quality management aspects of operation. Acts as primary point of contact for customers at the work site level. Essential Responsibilities: • Provides direction and leadership to all site assigned personnel. • Prepares and submits site labor/non-labor budgets, forecast estimated costs and control subcontractors • Controls service contracts in support of site operations • Manages all department managers/staff assigned to site operations • Manages and coordinates research and investigations into business problems. • Provides guidance and assistance relative to operating problems and projects. • Perform all other position related duties as assigned or requested. Minimum Position Knowledge, Skills, and Abilities Required: • Bachelor's degree or equivalent combination of academic/technical/military training and experience. • Possess excellent communication, analytical, project management and supervisory skills. Desktop computer skills are essential with proficiency in full range of Microsoft Office products and should be capable of preparing management level reports and presentations. • Position may require occasional travel. • Possess a valid state issued driver s license. Work Environment, Physical Demands, and Mental Demands: Typical office environment with no unusual hazards, occasional lifting to 20 pounds, constant sitting while using the computer terminal, constant use of sight abilities while reviewing documents, constant use of speech/hearing abilities for communication and constant mental alertness. Must possess planning/organizing skills and must be able to work under deadlines. Position requires routine travel to site operating locations. Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Proven experience working with foreign labor workforce.</p> <p>Possess 5 or more years of diverse management experience including experience in vehicle maintenance, facilities maintenance or logistics management.</p><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Overview ***This position is physically located in Balad, Iraq*** Under the supervision of the Firefighter Crew Chiefs, the Firefighter responds to multiple-types of emergencies operating as a firefighter. Maintains vehicles, equipment, tools, and protective clothing in a serviceable condition. Extinguish fires and takes precautions to prevent fire rekindling. Operates pumps, foam generators, turrets, nozzles, and other firefighting tools and equipment. Exercises caution to avoid personal injury and property damage and comply with strict health and safety standards. At the site of a fire protects and preserves evidence indicating the cause of the fire. Properly wears personal protective clothing. Conducts and take part in frequent reoccurring proficiency training, OJT and maintains required certifications. Performs other duties as assigned. Responsibilities This position description is subject to change at any time as needed to meet the requirements of the program or company. + Participates as a positive team member and understands and conforms to the LOGCAP V contract Performance Work Statement. + Actively participates and maintains a safe workplace, ensuring safety is the highest priority. + Complies with all Environmental, Health, and Safety (EHS) and Quality Assurance (QA) requirements and goals. + Maintains documentation as necessary to meet these requirements. + Ensures emergency equipment is operational and in a state of readiness as required by NFPA or other industry standards. + Maintains and clean personal protective equipment and works as an effective team member in cleaning equipment and facilities. + As part of a team conducts fire inspections, pre-incident planning and ensures that facilities are safe and documentation is recorded and tracked. + Operates computerized digital fire alarm receiving equipment including two-way radio communications equipment. + Performs additional property control and logistical duties in support of fire department operations to include, maintaining accountability of equipment, scheduling maintenance of equipment, coordinating appointments of subordinates, and other administrative duties as needed. + Serves as a team member on a rescue unit, ladder truck, engine company, water tender, or airport ARFF apparatus. + Enters burning or contaminated structures, vehicles, and other immediately dangerous to life and health areas to fight fires and/or perform rescues while wearing required personal protective equipment. + Acts as a crew member for structural fires, aircraft fires, rescue operations, medical emergencies, hazardous materials responses and other emergency events as directed in accordance with process and procedures identified in the department, standard operating procedures. + Performs duties in support of organizational metrics. + Adequately and honestly tracks all data related to metrics. + Provides direct support to the achievement of all metrics related to the LOGCAP V. + Attends meeting in the absence of the supervisor or as needed. + Communicates professionally both orally and in writing with team members and others, as needed, to relay information necessary for job success. + This includes, but is not limited to, performance appraisals, job requirements, division metrics, projects, quality standard procedures, and safety practices. + Performs other duties as required. Qualifications + Minimum Qualifications: Education/Certifications: One-year related experience may be substituted for one year of education, if degree is required. + Must be able to pass annual firefighter Occupations Health Exam and SCBA Fit Testing IAW NFPA 1582 and 1583 + Must be available for recall. + Required to have IFSAC or Pro-Board Certification to these levels: Hazardous Materials Awareness and Operations, Fire Fighter II, Airport Firefighter (ARFF), Driver Operator Pumper and Driver Operator ARFF, Mobile Water Supply, CPR &amp; First Aid Responder and Telecommunicator II. + Experience: + Minimum Five (5) years experience as a Fire Fighter working on a DOD Installation. + Skills: + Possess the ability to demonstrate firefighter knowledge and skills in a professional manner. + Ability to work effectively with fellow employees and management personnel at all levels to include multinational staff, and military officials. + Strong ability to exercise professional discretion and good judgment and to understand the effect of decisions made. + Exhibit strong interpersonal skills and ability to communicate in English both verbally and writing and must have good computer skills in MS-Word, MS-Excel, and MS- Outlook. + Working Conditions: + Duties will involve the conduct of work in the outdoors with a potential exposure to extreme climatic conditions including frequent dust storms and high temperatures up to 130 degrees in the summer months. + Potential exposure to chemical or biological agents could exist. + Employee use of personal protective equipment (PPE) in certain areas is required. + Such PPE includes but is not limited to head, foot, hand, torso, respiratory, vision, and hearing protective devices. + Must comply with all Fire Department, company, and Army safety policies. + Must be able to respond and work in all types of weather and in less than ideal conditions and may have to enter hazardous environments. + Must be able climb ladders to gain access to upper levels of buildings or to rescue individuals from burning structures or when trapped. + Physical Requirements: + Must meet or exceed physical requirements contained in the current edition NFPA 1582, including but not limited to the physical strength and ability to perform heavy and strenuous tasks for extended periods of time under dangerous and uncomfortable conditions, often while wearing bulky protective gear, including self-contained breathing apparatus. + Must be available for recall and manage personnel issues off duty. At V2X, we are deeply committed to both equal employment opportunity, including protection for Veterans and individuals with disabilities, and fostering an inclusive and diverse workplace. We ensure all individuals are treated with fairness, respect, and dignity, recognizing the strength that comes from a workforce rich in diverse experiences, perspectives, and skills. This commitment, aligned with our core Vision and Values of Integrity, Respect, and Responsibility, allows us to leverage differences, encourage innovation, and expand our success in the global marketplace, ultimately enabling us to best serve our clients.</p> </div>

<p>The Disposal operator will be based at Amentum Baghdad Embassy Compound (BEC) in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager.</p><p>The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data related to activities meet the requirements.</li><li>Process excess documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process and coordinate Equipment Transfers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Conduct daily inspections of assigned equipment and immediately report defects or maintenance requirements.</li><li>Assist with scrap metal processing and preparation for disposal or recycling.</li><li>Assist in contingency waste removal operations during emergencies, special events, or increased operational requirements.</li><li>Perform additional duties and projects assigned.</li></ul><p>REQUIRED:</p><p>Minimum Acceptable Experience Level:</p><ul><li>Minimum 4 or more years experience handling waste management and disposal activity.</li><li>Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.</li><li>Ability to operate or learn Disposal collection equipment and material handling equipment.</li><li>Ability to communicate effectively with supervisors and team members.</li></ul><p>Knowledge, Skills, and Abilities:</p><ul><li>Prior proven experience in Property Disposal operations with Defense Reutilization</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li><li>Basic recordkeeping and reporting skills.</li></ul><p>Physical Requirements</p><ul><li>Frequently lift and carry materials weighing up to 25 kg.</li><li>Stand, walk, bend, climb, kneel, and work for extended periods.</li><li>Operate manual and powered equipment safely.</li><li>Work in dusty, noisy, and outdoor environments.</li><li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li></ul><p>Working Conditions</p><ul><li>Outdoor and industrial work environment.</li><li>Exposure to heat, dust, noise, and moving equipment.</li><li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li></ul><p>Performance Expectations</p><ul><li>Complete disposal operations safely, efficiently, and on schedule.</li><li>Maintain high standards of cleanliness throughout assigned work areas.</li><li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li><li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li></ul><p>Education:</p><ul><li>A high school diploma or GED (General Education Diploma) Certifications or 4 years substitute experience in waste management and disposal services will be acceptable.</li><li>Valid Iraqi driver s license (if operating company vehicles).</li></ul><p>Security Vetting:</p><ul><li>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position.</li><li>Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li></ul><p>Language Skills:</p><ul><li>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li></ul><p>Medical:</p><ul><li>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and drug requirements for duration of deployment.</li></ul><p>DESIRED:</p><ul><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Experience supporting Department of State.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li><li>Expert communication skills to facilitate and disseminate information.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 4 or more years experience handling waste management and disposal activity.</li><li>Previous experience in waste management, sanitation, logistics, construction support, or material handling preferred.</li><li>Ability to operate or learn Disposal collection equipment and material handling equipment.</li><li>Ability to communicate effectively with supervisors and team members.</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high-performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Ability to prioritize multiple tasks in a fast-paced operational environment.</li><li>Basic recordkeeping and reporting skills.</li><li>Frequently lift and carry materials weighing up to 25 kg.</li><li>Stand, walk, bend, climb, kneel, and work for extended periods.</li><li>Operate manual and powered equipment safely.</li><li>Work in dusty, noisy, and outdoor environments.</li><li>Wear required PPE, including safety boots, gloves, eye protection, hearing protection, and reflective clothing.</li><li>Outdoor and industrial work environment.</li><li>Exposure to heat, dust, noise, and moving equipment.</li><li>May be required to work overtime, weekends, holidays, or emergency callouts to support mission requirements.</li><li>Complete disposal operations safely, efficiently, and on schedule.</li><li>Maintain high standards of cleanliness throughout assigned work areas.</li><li>Ensure waste is properly segregated and disposed of in accordance with environmental requirements.</li><li>Demonstrate reliability, professionalism, accountability, and teamwork while supporting mission operations.</li><li>A high school diploma or GED (General Education Diploma) Certifications or 4 years substitute experience in waste management and disposal services will be acceptable.</li><li>Valid Iraqi driver s license (if operating company vehicles).</li><li>Already possess a RSO issued security clearance or be able to obtain a favorable RSO issued clearance prior to being hired is required for the position.</li><li>Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Satisfactory English and Arabic proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq.</li><li>Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Experience supporting Department of State.</li><li>Experience working with Amentum.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions.</li><li><br></li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> The Point of contact for the M&amp;E and Department for all matters relating to contracts, contracting and procurement and interface with PSCM. Assists the M&amp;E Teams by developing and managing Contracting and Procurement (C&amp;P) strategies and plans that align with M&amp;E Department strategic performance objectives. Ensures that contracting and procurement strategies are aggregated, optimised, and standardised for efficient utilisation. Manages the interface with key stakeholders, including technical end users, Procurement and Supply Chain Management (PSCM) and contractor bodies alike. Monitors contract health and performance management, continually seeking areas for improvement. Manages the contractor performance review program. Supports, coaches, and develops team members in delivery of commitments.<br> <br> Key accountabilities:<ul><li>Develop and implement the M&amp;E Contracting &amp; Procurement strategy in conjunction with M&amp;E Team Managers.</li><li>Prepare and implement a project Contracting &amp; Procurement plan for each M&amp;E Team delivery requirements.</li><li>Develop and implement a project Supplier Quality &amp; Integrity Management Strategy in conjunction with the M&amp;E Team Managers.</li><li>Develop sourcing and contract transition strategies that support M&amp;E Team performance objectives.</li><li>Provide contract governance and assurance guidance to M&amp;E Team Managers and Contract Accountable Managers.</li><li>Ensure that contracts, CTRs and purchase orders are effectively managed and administered to support M&amp;E objectives and budgets.</li><li>Generates the monthly M&amp;E contract performance and health summary, with input from periodic contractor performance review program</li></ul><br> Criteria &amp; Qualifications:<ul><li>Experienced in Oil &amp; Gas related industry contracting</li><li>Experienced in a Cost, Supply Chain and/or contracts management role for a multinational company</li><li>Excellent communication skills ability to influence vertically and horizontally in a fast-paced environment,</li><li>University Degree or Appropriate Qualification in Business or Contracts management</li><li>Experience of the Capital Value Processes and PSCM drivers and processes</li><li>Previous experience of working within a multi-cultural and multi-discipline, multi-location environment.</li><li>Excellent spoken and written English language capability.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Disposal Yard Specialist will be based at Amentum Baghdad Embassy Compound [BEC] in Baghdad, Iraq, and serve the Base Life Support Services contract in support of the State Department. This position will report to the Disposal Yard Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li><li>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Ensures data accuracy and update of equipment inventory database.</li><li>Ensure that related data processing activities meet the requirements.</li><li>Process excess turn-in documentation for all controlled and non-controlled excess equipment and materials.</li><li>Review, reconcile, adjust and process all inventory transactions.</li><li>Process Survey Reports for all missing equipment.</li><li>Process and coordinate Equipment Transfers.</li><li>Perform positive verbal and written communication skills with all internal and external customers.</li><li>Assist in a broad scope of direct and indirect support activities involving customer owned equipment as necessary to complete assigned tasks.</li><li>Perform additional duties and projects as assigned.</li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>Minimum Acceptable Experience Level: Minimum of 3 years experience supporting a DOD or DOS program Exposure, at least two (2) years of international experience.</li><li>Knowledge, Skills, and Abilities:</li><li>Prior proven experience in Property Disposal operations with Defense Reutilization Management Operations (DRMO), Hazmat experience.</li><li>Experience operating heavy equipment to include up to a 30K Forklift, Extended reach Forklift, Material Handler, Grappler (Excavator), Front End Loader and Material Shredders.</li><li>Experience with cutting torches to include Plasma cutters.</li><li>Commitment to maintaining a high performance team which delivers customer service excellence.</li><li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Computer skills, specifically in Microsoft Word and Excel.</li><li>Ability to become an active and functioning member of a team.</li><li>Ability to be innovative and be an agent for change.</li><li>Expert communication skills to facilitate and disseminate information.</li><li>Education: A high school diploma or GED (General Education Diploma), Bachelor s Degree in related field fifteen (15) yeas of related experience.</li><li>Passport, Licenses and Certifications:</li><li>As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li><li>Valid drivers license</li><li>Security Vetting: Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</li><li>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</li><li>Medical: Successfully complete and pass the medical and drug examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and drug requirements for duration of deployment.</li><li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li><li>Department of State experience.</li><li>Five to seven years of international experience in challenging locations, preferably working in the Middle East, with a working knowledge of customs and cultural differences.</li><li>Experience working with Amentum-PAE.</li><li>Knowledge of the principles and processes involved in Quality Control Management.</li><li>Successful management of multiple sites in geographically dispersed locations.</li><li>Ability to collect, analyze and summarize data and to prepare clear and concise reports.</li><li>Experience in effectively dealing with international and headquarters staff, and sensitivity to other cultures.</li><li>Exercise sound judgment and make decisions independently.</li><li>Excellent organizational and time management skills, with the ability to handle multiple tasks and administrative details in a fast paced and constantly changing environment. Expert communication skills to facilitate and disseminate information.</li></ul><p></p></section>