Highway (road) Engineer Jobs

<p>Requirements &amp; Summary</p><ul><li>Skills : Process Management , Process Engineer</li><li>Other Skills : Process Safety Engineer, Safety Engineer, QAR, RAM, FEED, detailed design, safety-critical systems, process safety and risk management</li><li>Experience : 20 + Years</li><li>Education : Bachelors/3-5 yr Degree</li><li>Employment Type : Full Time Salaried Employee</li><li>Location : Iraq, Iraq</li></ul><p>Qualifications and Experience</p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li></ul><p>Competencies:</p><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul><p>The Senior Process Safety Engineer is responsible for the governance and management of all process safety, risk management, and loss prevention activities throughout the full lifecycle of the integrated project. Acting on behalf of the Owner within the PMT, this role ensures that safety considerations are embedded in site selection, layout development, FEED, detailed design, construction, commissioning, and start-up. The Senior Process Safety Engineer oversees all safety studies, risk assessments, and safety-related design reviews, and ensures alignment with international standards, regulatory requirements, and Owner safety philosophy. The role includes oversight of PMC safety resources and coordination of safety inputs across all contractors and licensors.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Education: Bachelor degree and above in Chemical Engineering or related discipline.</li><li>Experience: Minimum 20 years of experience in process safety and risk management for large oil, gas, or refining projects.</li><li>Technical Background: Strong expertise in process safety studies, QRA, RAM, safety-critical systems, and international safety standards.</li><li>Competencies:</li><ul><li>Ability to integrate safety across disciplines and project phases</li><li>Strong analytical and risk assessment skills</li><li>Experience in multi-contractor project environments</li></ul></ul>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Water Injection Engineer will be responsible for designing, developing, and optimizing water injection systems to support enhanced oil recovery (EOR) and reservoir pressure maintenance. The role includes conducting hydraulic analysis and simulation modeling, monitoring system performance, optimizing injection efficiency, preparing engineering documentation, supporting commissioning and start-up activities, and ensuring compliance with HSE, environmental, and industry standards. The successful candidate will work closely with reservoir, production, and operations teams to improve field performance and mentor junior engineers.</p><p>Bachelor's degree in Petroleum Engineering, Chemical Engineering, Mechanical Engineering, or a related engineering discipline; a Master's degree is an advantage. Minimum of 10 years of experience in water injection engineering within the Oil & Gas industry. Strong expertise in enhanced oil recovery (EOR), reservoir pressure maintenance, hydraulic analysis, water treatment systems, pipeline hydraulics, and injection well performance. Proficient in Aspen HYSYS, PIPEPHASE, OLGA, or equivalent simulation software. Excellent analytical, project management, communication, and troubleshooting skills. Professional Engineer (PE) registration or equivalent certification is preferred.</p>

<p>The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.</p><p>Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.</p>

<p>The Electrical Engineer will be responsible for the design, analysis, and maintenance of high-voltage transmission systems supporting petroleum and gas operations. The role includes leading transmission line projects from concept through commissioning, conducting electrical load analysis, preparing system models, developing technical specifications, ensuring compliance with IEEE, NESC, NEC, and environmental regulations, and coordinating with multidisciplinary engineering teams. The successful candidate will also oversee inspections, mentor engineering staff, and provide technical expertise for transmission system upgrades and expansion projects.</p><p>Bachelor's degree in Electrical Engineering is required; a Master's degree with a specialization in Power Systems is highly preferred. Candidates must have a minimum of 10 years of electrical engineering experience, including at least 5 years in high-voltage transmission line design, analysis, and maintenance within the oil & gas, petroleum, or energy industry. Proficiency in ETAP, PLS-CADD, AutoCAD, or equivalent electrical engineering software is required. Strong knowledge of IEEE, NESC, and NEC standards, proven leadership skills, excellent communication abilities, and a Professional Engineer (PE) license or equivalent certification are preferred.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Minimum 5 years of experience as an Electrical Site Engineer on construction, industrial plant, or high-rise building projects. Strong experience in electrical systems, site execution, and installation works. Holder of a valid Senior Authorised Person (SAP) certification. Good command of English (written and spoken). Hands-on experience with LV/MV systems, cabling, panel installation, testing, and commissioning. Strong teamwork, communication, and coordination skills.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><p>Bachelor's degree in Electrical Engineering or Electrical &amp; Electronics Engineering. Minimum 5 years of experience as an Electrical Site Engineer on construction, industrial plant, or high-rise building projects. Strong experience in electrical systems, site execution, and installation works. Holder of a valid Senior Authorised Person (SAP) certification. Good command of English (written and spoken. Overseas project experience is preferred. Hands-on experience with LV/MV systems, cabling, panel installation, testing, and commissioning. Strong teamwork, communication, and coordination skills.</p><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>We are hiring a Quality CSA Lead Engineer for major Oil &amp; Gas / Industrial EPC projects. If you have deep expertise in Civil, Structural, and Architectural (CSA) QA/QC and a strong background enforcing Total Energies standards , we want to hear from you. Key Responsibilities QA/QC Management: Establish and maintain the CSA Quality Management System in line with Total Energies specifications, PQPs, and international codes (ACI, ASTM, AISC, AWS, Eurocodes). Inspection &amp; Control: Lead inspections for earthworks, concrete pour cards, structural steel fabrication/erection, welding, grouting, and architectural finishes. TPIA Coordination: Manage Hold, Witness, and Surveillance points with Third-Party Inspection Agencies and laboratories. NCR Management: Drive root cause analysis (RCA), raise/close Non-Conformance Reports, and manage punch lists to client satisfaction. Team Leadership: Mentor field QA/QC teams and represent the quality department during client and Total Energies audits.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>Preferred candidate profile</b></p><ul><li>Education: Bachelors Degree in Civil Engineering.</li><li>Experience: 1215 years in CSA QA/QC within Oil &amp; Gas or Industrial EPC environments.</li><li>Leadership: Minimum 5 years of experience in a Lead or Senior QA/QC capacity.</li><li>Certification: Certified ISO 9001:2015 Lead Auditor. Certified QA/QC Engineer (CSWIP, BSI, or equivalent preferred)</li></ul><p></p></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Title:</strong> Wireline Engineer<br> <strong>Location:</strong> Iraq&nbsp;<br> <strong>Industry:</strong> Oil &amp; Gas&nbsp;<br> <strong>Department:</strong> Wireline Services<br><strong>Job Summary</strong><br>The Wireline Engineer is responsible for planning, executing, and supervising wireline operations for oil and gas wells in accordance with company, customer, and HSE standards. The role includes operating wireline equipment, acquiring and validating downhole data, performing perforating and logging services, maintaining operational efficiency, and ensuring safe execution of field activities.<br><strong>Required Qualifications</strong><br><ul><li>Bachelor's Degree in Engineering Discipline.</li><li>3–10+ years of wireline field experience in oil &amp; gas operations.</li><li>Experience with Open Hole and/or Cased Hole wireline services.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>The Project Planning & Cost Engineer is responsible for developing, implementing, and maintaining project planning, scheduling, budgeting, and cost control systems for oil and gas projects. The role includes preparing project schedules and cost forecasts, monitoring project performance, analyzing cost variances, reviewing contractor invoices and change orders, preparing management reports, supporting risk assessments, and coordinating with engineering, procurement, construction, and project management teams to ensure projects are delivered safely, on time, and within budget.</p><p>Bachelor's degree in Engineering, Project Management, Construction Management, Finance, or a related discipline. Minimum of 5 years of experience in project planning and cost engineering within the Oil & Gas, Energy, EPC, Construction, or Industrial sectors. Strong knowledge of project scheduling, budgeting, forecasting, earned value management, and cost control. Proficient in Primavera P6, Microsoft Project, SAP, Oracle, or equivalent project management software. Excellent analytical, reporting, communication, and problem-solving skills. Professional certifications such as PMP, CCP, PSP, or AACE are highly desirable.</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<p>The Project Planning & Cost Engineer is responsible for developing, implementing, and maintaining project planning, scheduling, budgeting, and cost control systems for oil and gas projects. The role includes preparing project schedules and cost forecasts, monitoring project performance, analyzing cost variances, reviewing contractor invoices and change orders, preparing management reports, supporting risk assessments, and coordinating with engineering, procurement, construction, and project management teams to ensure projects are delivered safely, on time, and within budget.</p><p>Bachelor's degree in Engineering, Project Management, Construction Management, Finance, or a related discipline. Minimum of 5 years of experience in project planning and cost engineering within the Oil & Gas, Energy, EPC, Construction, or Industrial sectors. Strong knowledge of project scheduling, budgeting, forecasting, earned value management, and cost control. Proficient in Primavera P6, Microsoft Project, SAP, Oracle, or equivalent project management software. Excellent analytical, reporting, communication, and problem-solving skills. Professional certifications such as PMP, CCP, PSP, or AACE are highly desirable.</p>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Duty Engineer you are responsible for all the mechanical and technical maintenance and HVAC equipment within your property and your role will include key responsibilities such as:<br><br>• Supervise and control the preventive maintenance schedule<br>• Be responsible for the health safety of the property<br>• Follow the preventive maintenance chart strictly and maintain records for future reference<br>• Coordinate with other department’s counterparts to ensure their satisfaction on quality and progress<br>• Create departmental training programmes among engineering employees and create opportunities to multitask<br>• Distribute the work to subordinates accordingly to their capabilities in order to get the best results to the specified standards</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Process Engineer (Local Talent)<br><br><p><b>"Belong, Connect, Grow, with KBR!</b></p><br><br><br><p><b>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</b></p><br><br><p><b>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</b></p><br><br><br><p><b>Position title: </b>Process Engineer</p><br><br><p><b>Position status: </b>Local Talent</p><br><br><p><b>Position reports to: </b>Lead- Operation Support &amp; Process</p><br><br><p><b>Department: </b>O&amp;M Support</p><br><br><p><b>Rotation pattern: </b>28/28</p><br><br><br><p><b>Job purpose</b></p><br><br><br><p>Responsible for the process design, operation and implementation, improve industrial processes in order to maintain efficiency, reduce cost, improve sustainability and maximize profitability.</p><br><br><br><p><b>Duties and responsibilities</b></p><br><br><ul><li>Develop, configure and optimize industrial processes from inception through to start up and certification</li><li>Assess processes, take measurements and interpret data</li><li>Design, run, test and upgrade systems and processes</li><li>Develop best practices, routines and innovative solutions to improve production rates and quality of output</li><li>Perform process simulations</li><li>Manage cost and time constraints</li><li>Provide technical assurance to unit operations and ensure production plan delivery</li><li>Provide process documentation and operating instructions</li><li>Participate timely completion of Management of Change work (MOCs, medium to long term).</li><li>Utilise and perform maintenance of standardized monitoring tools to perform unit monitoring (Spreadsheets, or data historians like PI Process Book, etc).</li><li>Participate in special projects as required</li><li>Support Senior Operation Support Engineer as required</li><li>Consult technical specialist teams as required</li><li>Facilitate/ Pparticipate in HAZOP studies, and other safeguarding reviews</li><li>Utilize structured problem-solving techniques as appropriate: option analysis, RCA, etc</li><li>Ensure compliance with engineering related regulations and Shell standards</li><li>Promote and support compliance to Operating Integrity</li><li>Provide input into and support for the Integrated Activity Plan</li><li>Support Operations Reliability Improvement Process to ensure timely and appropriate corrective action has been taken to ensure repeat failures are eliminated</li></ul><br><br><p><b>Qualification &amp; Training requirements</b></p><br><br><ul><li>BSc. Degree in one of chemical or petrochemical engineering department.</li></ul><p><b>Experience </b></p><br><br><ul><li>A minimum of 5 years of proven working experience in Process Engineering.</li><li>Experience in process simulations, with working knowledge of process engineering software packages and Knowledge of process related standards.</li><li>Experience in different process industry, either upstream, downstream, gas plants or with engineering and construction major contractors.</li></ul><p><b>Language proficiency, computer and software skills</b></p><br><br><ul><li>Advanced knowledge of MS Office <b>Advance</b></li><li>Honey well Unisim <b>Intermediate</b> </li><li>PipeSim <b>Intermediate</b></li><li>Instrument Calc. tool <b>Intermediate</b></li><li>PI Process Book <b>Intermediate</b></li><li>English - Speaking, Writing and reading <b>Intermediate</b></li></ul><br><p><b>Skills</b></p><br><br><ul><li>Reading and updating process documents</li><li>Presentation skills</li><li>Problem Solving</li><li>Report Writing</li><li>Communication skills</li></ul><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <span><u><b>Job Summary</b></u> <br></span><p>The Senior Project Engineer ensures that projects are completed in a safely manner and meets the project objectives through planning and scheduling, resource allocation and management, cost control, technical direction, compliance with quality standards and procedures. Assists the Project Manager in overseeing the Operational Management areas: Human Resource Management, Project Planning, Cost Management, Time Management, Quality Management, Contract Administration, Safety Management, Subcontract management, Material Procurement and Management of all Projects System Assembly</p><br> <br><br><u><b>Job Responsibilities 1</b></u> <br><p>Manage and oversee projects from conception to completion, ensuring adherence to schedules, budgets, and quality standards.</p><br> <p>Coordinate with architects, engineers, contractors, and subcontractors to develop project plans, specifications, and timelines.</p><br> <p>Supervise activities on-site, including scheduling labor, materials, and equipment to ensure efficient project execution.</p><br> <p>Monitor project progress, identifying potential delays, risks, and issues, and implementing corrective actions as necessary.</p><br> <p>Conduct regular inspections and quality control checks to ensure compliance with design specifications and regulatory requirements.</p><br> <p>Prepare and review project documentation, including contracts, change orders, and progress reports, to maintain accurate records.</p><br> <p>Communicate regularly with clients, stakeholders, and project teams to provide updates on project status, milestones, and deliverables.</p><br> <p>Manage project budgets and expenditures, tracking costs and forecasting expenses to ensure financial objectives are met.</p><br> <p>Identify opportunities for process improvements and efficiencies to enhance project delivery and outcomes.</p><br> <p>Ensure compliance with safety regulations and promote a culture of safety awareness among project teams and subcontractors.</p><br> <p>Support the implementation of HSE initiatives, participate in safety awareness activities, and contribute to incident reporting and resolution in alignment with company and IMS policies</p><br> <br><br><u><b>Job Responsibilities 2</b></u> <br><br><b>Additional Responsibilities 3</b> <br><br><u><b>Job Knowledge &amp; Skills</b></u> <br><p>n-depth understanding of construction principles, methods, and materials.</p><br> <p>Proficiency in project management software and tools for scheduling, budgeting, and documentation.</p><br> <p>Strong communication skills to effectively liaise with stakeholders, subcontractors, and project teams.</p><br> <p>Problem-solving abilities to address challenges and obstacles encountered during project execution.</p><br> <p>Leadership skills to effectively manage teams and coordinate construction activities on-site.</p><br> <p>ERP knowledge preferably SAP functional skills are a requirement to be successful in this role.</p><br><br><br><u><b>Job Experience</b></u> <br><p>Minimum 8 year(s) working experience, 5 year(s) relevant working experience, 2 year (s) GCC is a plus</p><br><br><br><u><b>Competencies</b></u> <br>Agility<br>AI Fluency<br>Resilience<br>Quality<br>Leadership<br>Contingency Workforce Management L3<br>Commercial &amp; Residential Construction L3<br>Project Planning L3<br>Construction Budgeting L3<br>Project Management L3<br><br><br><u><b>Education</b></u> <br>Profesional degree in MMUP Engineer Registration (UPDA)<br>Bachelor's Degree in Civil Engineering or any related field<br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Instrument &amp; Controls Lead Engineer<br><br><p><b>Instrument &amp; Controls Lead Engineer</b></p><br><br><p>ECSS40 - Principal Specialist, Commissioning</p><br><br><p>Rotation: 28/28</p><br><br><br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><p>We are looking for an Instrument &amp; Controls (I&amp;C) Lead for an upcoming project. This role will work with our team of engineers to identify and define solutions that reduce risk and grow installed production capacity. This role will provide Instrument and Controls support for site operations while ensuring safe and effective operations through managing risk, addressing questions, and minor modification activities. The Instrument &amp; Controls Lead Engineer will be responsible for providing immediate front-line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team. This role will report to the Area Engineering Support Team Lead and will have I&amp;C Engineers as direct reports.</p><br><br><br><p><b>Responsibilities: </b></p><br><br><ul><li>Production Delivery, Optimisation &amp; Excellent Performance</li><li>Responsible for day-to-day optimization of I&amp;C systems to ensure safe, stable, and efficient process control, including loop tuning, alarm management, and SIS performance monitoring.</li><li>Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.</li><li>Ensure control systems are operated within their design and operating envelopes; any deviations are reported, risk assessed and managed via operational risk assessment processes.</li><li>Lead or support root cause investigations (e.g., 5 Whys, fault tree analysis) for I&amp;C-related process safety incidents, production losses, and product quality issues exceeding defined limits.</li><li>Prioritize I&amp;C vulnerabilities based on risk and production impact, ensuring corrective actions are focused on the highest-priority issues.</li><li>Actively lead Continuous Improvement projects involving instrumentation, automation, and control systems; promote CI philosophy and engage site teams to drive improvement initiatives.</li></ul><p><b>Qualifications:</b></p><br><br><ul><li>Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)  Technical degree in Engineering or relevant engineering subject.</li><li>Experience in previous asset engineering / operations engineering role  Practical exposure to production facilities.</li><li>Excellent communication, interpersonal and coaching skills  Strong bias for being proactive and getting results.</li><li>Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.</li><li>Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results.</li><li>Skilled in behaviour change management Not essential but preferable:  Professional (Chartered) Engineer.</li><li>Experience in roles in culturally and linguistically diverse working environments</li></ul><br><p><b>Preferred Qualifications:</b></p><br><br><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Mechanical Engineer to join its Iraq business unit focusing on ensuring that all work is completed without compromise to quality and is delivered according to the project schedule.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br> </div>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>