وظائف مهندس ميكانيكا معدات ثقيلة - بغداد العراق

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Operate heavy equipment in compliance with the company's operating safety policies and procedures. Provide recommendations for maintaining and improving environmental performance. Load and unload equipment from vehicles and trailers. Ensure company equipment, material, and the work site are maintained, kept clean, and stored in a safe manner. Collect and dispose of scrap, excess materials, and refuse. Observe distribution of paving material to adjust machine settings or material flow, and indicate low spots for workers to add material. Complete required paperwork, reporting, and other documentation.</p></div></section>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>• Applying and following the client contractual QHSE obligations, PSGS’ QHSE policy and procedures.</p><p>• Maintaining the integrity of the ISO Management Documentation System and standards of ISO 9001, ISO 14001, ISO 22000, &amp; ISO 45001.</p><p>• Maintaining, repairing and installing plumbing and related fixtures and components, as well as appliances and trims.</p><p>• Repairing piping of various sizes and types.</p><p>• Checking safety equipment and replacing components such as washers, gaskets and filters.</p><p>• Inspecting, repairing or replacing pumps, valves and boiler systems.</p><p>• Monitoring work done by outside contractors for adherence to Plumbing Code Requirements and reporting back to direct manager.</p><p>• Installing supports and hangers for pipes, fixtures and equipment.</p><p>• Assembling and installing valves and fittings.</p><p>• Installing, repairing and maintaining water treatment equipment, piping and controls.</p><p>• Testing pipe systems and fixtures for leaks.</p><p>• Ensuring all installations, repairing and maintenance meet the requirements of the appropriate codes.</p><p>• Maintaining good relationship with the client to accomplish ongoing tasks in a timely manner.</p><p>• Ensuring all installations, repairs and maintenance meet environmental protection requirements.</p><p>• Maintaining appropriate service and repair records.</p><p>• Performing preventive/corrective maintenance and call-off activities on daily, weekly and monthly basis and ensuring that the company avoids any liquidated damages.</p><p>• Controlling the inventory for related equipment parts and supplies.</p><p>• Preparing Permit to Work and daily/weekly/monthly reports and sharing them with the management.</p><p>• Preparing estimation for call-off works and sharing it with the management.</p><p>• Coordinating with the client on regular basis for related works and assisting in completing the third-party request.</p><p>• Performing other duties as directed.</p><p><br></p> </div><h2 class="h5">Skills</h2> <div data-jb-field="skills"><p>·&nbsp;&nbsp;&nbsp;Diploma in Mechanical or Trade Certificate or a similar discipline</p><p>·&nbsp;&nbsp;&nbsp;5+ years in a similar role, Middle East experience preferred</p><p>·&nbsp;&nbsp;&nbsp;Must understand regulatory compliance and be able to maintain and submit any documentation required</p><p>·&nbsp;&nbsp;&nbsp;Fluent in English, Arabic is an added value</p><p>·&nbsp;&nbsp;&nbsp;Computer literate</p><p><br></p></div>

<p><b>Job Objectives/Project context:</b></p><p><br></p><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><p><br></p><p>Key Responsibilities:</p><p><br></p><p>Monitoring &amp; driving: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</p><p>Acceleration: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</p><p>Methodology: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</p><p>Documentation: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</p><p>Coordination: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</p><p>Reporting: Run daily and weekly review meetings with Construction, CSU and Company Representative.</p><p>Handover: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.</p><p>&nbsp;</p><p><b>Qualifications</b></p><p><br></p><p><br></p><p>Expected:</p><p><br></p><p>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</p><p>Experience:</p><p><br></p><p>Experience: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</p><p>Projects: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</p><p>Methodology: knowledge of OPERCOM and Orbit is a plus.</p><p>Environment: Previous experience working for a major international operator and managing multi-discipline contractors.</p><p>Technical Skills:</p><p><br></p><p>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</p><p>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</p><p>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</p><p>Proficiency with completion management tools (ICAPS or equivalent).</p><p>Personal Qualities:</p><p><br></p><p>Leadership: Ability to challenge contractors and enforce priorities.</p><p>Adaptability: Comfort in fast-track, multicultural and high-pressure environments.</p><p>Rigor: Strong reporting discipline, documentation rigor and clear communication.</p><p>Diplomacy: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</p><p>Languages:</p><p><br></p><p>Fluent professional English (mandatory).</p><p>French appreciated. Arabic is a plus.</p><p>Conditions:</p><p><br></p><p>Site-based assignment in Iraq, Rotational.</p><p><strong>Desired Candidate Profile</strong></p><p><br></p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Mechanical Engineer<br><br><span><u><b>Lead Mechanical Engineer</b></u></span><b>EFLD35 - Principal Technical Professional - Field Engineering</b><br>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.<b><u>Responsibilities:</u> </b>• Day to day delivery of Mechanical Engineering support for site operations.• Deliver safe and effective operations by managing risks, addressing queries and minor modifications activities.• Collaborates with Central Engineering team to identify and define engineering solutions to reduce risk and grow installed production capacity.• Promotes a culture of open safety reporting and continuous improvement.• Provides immediate front line support for Operations and Maintenance teams to resolve minor issues and escalate more significant issues to the Central Engineering Team.• Ensures asset Mechanical Engineering risks (both static and rotating) are understood, controlled, managed and reduced.• Participates in a variety of asset and project risk assessments• Input into anomaly assessment and resolution plans.• Monitors condition monitoring data and health of static and rotating equipment and associated operating envelopes, recording and investigating all Safe Operating Limit excursions.• Monitors static/rotating equipment KPIs and initiates corrective actions as necessary.• Provides Mechanical support to technical MoCs and Engineering Queries• Acts as technical interface with Projects and Modifications organisation, including development of Statement of Requirements (SOR) and Project Initiation Requests (PIRs) and Decision Support Packages (DSP)• Supports delivery of Production Efficiency Improvement and Defect Elimination processes (including simple investigations for deferrals and vulnerabilities)• Identifies production vulnerabilities and optimization opportunities to support production forecast and grow IPC.• Performs follow-up actions and observations from self-verification checks that are related to Mechanical Engineering• Participates in Start Up Readiness and Assurance Reviews• Provides coaching to junior engineers.<br><u><b>Experience, Qualifications &amp; Key Skills</b></u>• Above 10 Years experience in O&amp;G industry (Preferable with IOC’s direct or contract)• Professional (Chartered) Engineer Preferred• Technical degree in Mechanical Engineering or allied engineering subject.• Experience in previous asset engineering / operations support engineering role• Practical exposure to production facilities• Excellent communication, interpersonal and coaching skills• Strong bias for being proactive and getting results• Excellent IT skills – Office suite, document management, applications for CMMS and Change Management.• Contribute to an environment in which all team members are respected regardless of their individual differences and are motivated to improve both their individual and team contributions to achieve desired business results• Skilled in behavior change management<br><u><b>Preferred Qualifications:</b></u><ul><li>Certified Professional Engineer</li></ul><br><p><b>Belong. Connect. Grow. with KBR! </b></p><br><br><br><br><br> </div>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment. The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>DUTIES:</p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the:</li><ul><li>Prime power and water/wastewater treatment programs;</li><li>Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and</li><li>Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li></ul><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p>REQUIRED:</p><ul><li>Minimum Acceptable Experience Level:</li><ul><li>Five (5) or more years supervisory experience in physical plant and building operations, including power plants for large facilities.</li></ul><li><br></li><li><br></li><li>Language Skills: Strong, professional, oral and written English communication skills.</li><li>Medical: Favorable passage of a drug screen and physical examination.</li></ul><p>DESIRED:</p><ul><li>Degree in Electrical or Mechanical Engineering.</li><li>Relevant overseas physical plant and building operations experience.</li><li>Previous out of home country experience is highly desirable and previous work experience in harsh environmental conditions is a plus.</li><li>Experience working with Amentum.</li></ul><p>OTHER KNOWLEDGE, SKILLS AND ABILITIES:</p><ul><li>Knowledge of principles and processes involved in operating and supporting power generation, transition, and distribution as well as water and wastewater treatment functions at an overseas facility.</li><li>Experience providing excellent customer services.</li><li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li><li>Cross-cultural sensitivity with an international perspective.</li><li>Excellent organizational and time management skills.</li><li>Ability to become an active and functioning member of a team.</li><li>Must have the ability to be innovative and be an agent for change.</li></ul><p><br></p><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<p>The Chief Engineer will be based at one of the Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State.</p><p>The Chief Engineer is responsible for all water purification, water storage, water distribution and wastewater treatments, as well as generators, and associated power generation, transmission and distribution equipment.</p><p>The Chief Engineer is also responsible for the safe operation and maintenance of power plants, generators, compressors, air conditioning systems, etc., and operates industrial machinery and equipment in various forms.</p><p>The duties and responsibilities listed are representative of the nature and level of work assigned and are not necessarily all inclusive.</p><p><b><br></b></p><p><b>DUTIES:</b></p><ul><li>Responsible for maintaining a safe workplace and ensuring safety is the highest priority in the workplace.</li><li>Comply with all Environmental &amp; Safety and Quality Assurance requirements and goals.</li><li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li><li>Responsible for managing, monitoring and tracking physical plant and building operations services.</li><li>Supervise and oversee the operations of the water and wastewater treatment plants to include all water quality laboratory, pumping, filtering, piping and control systems.</li><li>Ensure the viability, availability and safety of water treatment and waste distribution systems.</li><li>Maintain water well operations and water storage systems.</li><li>Manage water treatment waste stream to contractual standards.</li><li>Oversee the: Prime power and water/wastewater treatment programs; Operation, calibration, diagnostics, troubleshooting and repairs to all mechanical, electrical equipment systems and electrical/pneumatic control systems.</li><li>Preventative maintenance, condition monitoring, repair, installation and modernization of all power generation, transmission and distribution equipment on site; and Support of prime power generators made by Caterpillar, Cummins, Perkins, FG Wilson and other manufacturers, with outputs ranging from 20KW up to 160KW.</li><li>Provide daily guidance and direction to supervisors, operators, mechanics and technicians.</li><li>Perform scheduled and unscheduled inspections.</li><li>Report any malfunctions or lack of compliance with SOW to the Chief Engineer.</li><li>Assist in developing the SOW when requested, including diagrams and specifications in compliance with Overseas Building Operations (OBO), Environmental Protection Agency (EPA), Occupational Safety and Health Administration (OSHA) and National electric Code (NEC) standards.</li><li>Maintain effective, timely and respectful communication and interaction with other employees and managers and support other organizations.</li><li>Perform administrative tasks including ordering material, inventorying and scheduling work.</li><li>Manage logistics, stock levels and workflow processes.</li><li>Collect, analyze and summarize data for report preparation and submit written reports.</li><li>Maintain appropriate technical library and record keeping, which documents all procedures necessary to accomplish assigned responsibilities.</li><li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts.</li><li>Take initiative to analyze situations and make frequent technical decisions based on specifications, safety and electrical codes.</li><li>Evaluate operational effectiveness and develop/maintain effective operational control mechanisms.</li><li>Responsible for allocating and managing staff resources according to changing needs</li><li>Identify problem areas and respond to mission requirements to perform task order requirements.</li><li>Plan and manage projects.</li><li>Control resources; monitor staff proficiency and qualifications; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff and USG representatives.</li><li>Resolve physical plant and building operations issues.</li><li>Provide professional engineering guidance for all future work and technical proposals and will be responsible for drafting and presenting reports and analysis of system performance and recommendations for improvement.</li><li>Interpret all architectural, civil, structural, mechanical, electrical, plumbing, and fire system diagrams or drawings for large facilities.</li><li>Continually interface with Department of State Facility Management personnel in order to coordinate the work being completed on the equipment systems within the Utilities section and brief the customer during meetings and site surveys.</li><li>Perform additional duties and projects as assigned.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li><br></li></ul>

<p>The Process Engineer will be responsible for designing, analyzing, and optimizing oil and gas processing systems to improve operational efficiency, safety, and reliability. The role involves developing process simulations, preparing engineering documentation including P&IDs and equipment specifications, conducting risk assessments and feasibility studies, supporting construction, commissioning, and start-up activities, and collaborating with multidisciplinary teams to integrate new technologies into existing facilities. The successful candidate will also ensure compliance with API, ASME, ISO, and environmental regulations while providing technical guidance and training to operations personnel.</p><p>Bachelor's degree in Chemical Engineering, Mechanical Engineering, Petroleum Engineering, or a related engineering discipline; a Master's degree is preferred. Minimum of 10 years of experience in oil and gas process engineering with expertise in processing facilities and system integration. Strong knowledge of HYSYS, PIPESIM, or similar process simulation software. Solid understanding of thermodynamics, fluid dynamics, process control, and international engineering standards including API, ASME, and ISO. Excellent analytical, project management, communication, and teamwork skills with the ability to work in multicultural environments.</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Senior CWI Engineer<br><br>Position Details<ul><li>Position Title: CWI Senior Engineer</li><li>Department: Wells</li><li>Location: Majnoon Oil Field – Basra, Iraq</li><li>Reports to: CWI Engineering Team Lead</li><li>Direct Reports: None</li></ul>1. Role Purpose<p>Provide engineering expertise in the planning, design, and execution support of completions, workover, well intervention and well integrity operations. Ensure high-quality engineering input, technical assurance, well integrity compliance, and continuous performance improvement across CWI operations.</p><br><br>2. Key ResponsibilitiesHSSE &amp; Well Integrity<ul><li>Champion a proactive safety culture with Zero Harm.</li><li>Conduct site safety visits, audits, and toolbox talk reviews.</li><li>Ensure compliance with well integrity standards such as NORSOK D‑010</li><li>Ensure engineering designs comply with HSSE policies, Life-Saving Rules, and well integrity guidelines.</li><li>Participate in risk assessments, HAZID, HAZOP, and technical assurance reviews.</li><li>Support incident investigations by providing technical analysis and recommendations.</li></ul>Program Development &amp; Technical Assurance<ul><li>Prepare and review Completion Programs, Workover Programs, and Intervention Procedures.</li><li>Develop well schematics, tool string designs, barrier philosophies, and risk assessments.</li><li>Ensure engineering designs comply with well integrity standards and operational requirements.</li><li>Perform technical evaluations for new technologies, equipment, and intervention methods.</li></ul>Operational Support &amp; Problem Solving<ul><li>Provide real-time engineering support to wellsite supervisors during operations.</li><li>Analyze operational challenges and propose technical solutions.</li><li>Perform pre-job and post-job reviews to ensure procedural compliance.</li><li>Support SIMOPS planning and coordination with Production, Subsurface, and Drilling teams.</li></ul>Cost &amp; Schedule Control<ul><li>Support development of budgets, forecasts, and AFE inputs.</li><li>Monitor job efficiency, performance, and operational KPIs.</li><li>Identify cost‑saving opportunities without compromising safety or quality.</li></ul>Contractor &amp; Performance Management<ul><li>Lead technical interface with service companies and contractors.</li><li>Evaluate technical proposals, equipment specifications, and new technologies.</li><li>Support tendering, technical evaluations, scopes of work, and contract management.</li><li>Monitor service quality and ensure alignment with engineering requirements.</li></ul>Reporting &amp; Governance<ul><li>Review technical proposals from service companies and ensure alignment with operational requirements.</li><li>Participate in contractor performance reviews and technical evaluations.</li><li>Ensure QA/QC compliance for equipment and tools used in rigless operations.</li></ul>3. Qualifications &amp; Experience<ul><li>Bachelor’s degree in Petroleum, Mechanical, or related Engineering discipline.</li><li>8-12+ years of experience in completions, well intervention, workover, and well integrity engineering disciplines.</li><li>Valid IWCF Level 4 Well Intervention Pressure Control certification.</li><li>Strong experience leading CWI engineering teams in high‑activity onshore fields.</li><li>Comprehensive understanding of well integrity standards (e.g., NORSOK D‑010), well control, and barrier management.</li><li>Strong knowledge of international standards (API, ISO, IOGP) and regulatory compliance requirements.</li><li>Expertise in completion, CT, slickline, e-line, ESP, stimulation, and workover engineering.</li><li>Experience in Iraq/Majnoon preferred.</li><li>Fluency in English; Arabic is an advantage.</li></ul>4. Core Competencies<ul><li>CWI Technical Mastery</li><li>Well Integrity &amp; Risk Management</li><li>Engineering &amp; HSSE Leadership</li><li>Performance Management &amp; Continuous Improvement</li><li>Cross‑Functional Collaboration</li><li>Contractor &amp; Stakeholder Management</li><li>Communication &amp; Technical Reporting</li></ul><br><p>Approved By: Steven Hendry</p><br><br><br><p>Position: Wells Manager</p><br><br><br><p>Date: 03 Mar 2026</p><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;<br> &nbsp;</p><br><br> Wood is a global leader in consulting, engineering and operations for the energy and materials sectors. With 33,000 people in around 50 countries, Wood supports clients across the full asset lifecycle, delivering safe, predictable outcomes while enabling resilient operations and a lower carbon future. Wood forms the Energy &amp; Materials pillar of Sidara - a global partnership uniting leading multidisciplinary engineering, design, and project management companies. www.woodgroup.com<br> <b>Diversity Statement&nbsp;</b><br> We are an equal opportunity employer that recognises the value of a diverse workforce. All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.<br><br>Responsibilities:<br><p>Wood is recruiting for a Senior Commissioning Engineer to join its Iraq business unit focusing on supporting the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p>This role is a full-time on-site role in Basra, Iraq with travel requirement.<br><strong>Reports to: </strong>Commissioning &amp; Start-Up Manager&nbsp;</p><br><p><i><strong>#Wood #Iraq #Basra #Senior Commissioning Engineer&nbsp;</strong></i></p><br><p><strong><u>The role</u></strong></p><br><p>This is an exciting opportunity for an experienced&nbsp;Senior Commissioning Engineer&nbsp;to join our Iraq Business Unit.</p><br><p><strong>Our Clients and Projects&nbsp;</strong></p><br><p><strong>Designing the future. Transforming the world.&nbsp;</strong></p><br><p>This Project aims to take over the existing asset and maximize the production in 2 phases. This is a fast-track project and schedule-oriented Design to enhance the production.&nbsp;</p><br><p>The Phase 1 will restore, upgrade, and develop the current plant (CPF1) including: Restoration of initial CPF1 capacity; building a new export pipeline (24”, ~30km); restoration of CPF1 integrity and operability; flaring elimination and released water; development of new flowlines, pads, and electrification network for approximately 30 new wells; debottlenecking of the plant; upgrade of the Safety and Security facilities.&nbsp;</p><br><p>Our scope is to provide Engineering, Procurement services and Construction assistance (EPsCa) for the initial development phase of the field in Southern Iraq. The scope of services includes FEED, detailed design, procurement support, and construction and commissioning assistance.</p><br><p><strong><u>What we can offer</u></strong></p><br><ul> <li><strong>Meaningful and interesting projects</strong> Delivered to high profile clients and complex projects in Iraq&nbsp;</li> <li><strong>Commitment to Diversity and Inclusion</strong>; we are an organisation actively committed to diversity and inclusion across our business with employee networks committed to giving all employees a voice&nbsp;</li> <li><strong>Competitive salary</strong> with regular salary reviews to ensure we are rewarding at the right level in line with the market&nbsp;</li> <li><strong>Medical Insurance:&nbsp;</strong>Ensures inpatient and outpatient medical care is available should you require treatment.&nbsp;</li> <li><strong>Commitment to continued professional development;</strong> development plans that are tailored to your individual needs and interests&nbsp;</li> <li><strong>Global connections</strong>: join experts around the world who are at the leading edge of our industry, shaping the standards of our profession&nbsp;</li> <li><strong>Long Service Award:&nbsp;</strong>Wood values the commitment and loyalty of our people. Celebrating Long Service provides an opportunity for the business to demonstrate their appreciation of the hard work, dedication and many years’ services of our employees at 5-year service milestones&nbsp;</li></ul><p><strong><u>Job Objectives/Project context:</u></strong></p><br><p>The project is a gas plant located in Iraq, delivered under a DBOOM (Design, Build, Own, Operate, Maintain) contract. The Construction phase and Mechanical Completion are ongoing, Commissioning to be started very sooner. An experienced reinforcement is required to support the Commissioning &amp; Start-Up Manager, drive contractors across all disciplines and accelerate activities in fast-track mode, with no compromise on safety or quality.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul> <li><strong>Monitoring &amp; driving</strong>: Ensure day-to-day monitoring of contractors’ progress across all disciplines (ICSS, mechanical, electrical, instrumentation, HVAC, utilities…).</li> <li><strong>Acceleration</strong>: Challenge contractors, identify bottlenecks, enforce priorities and push teams to meet commissioning milestones.</li> <li><strong>Methodology</strong>: ORBIT methodology is considered for this project for the follow up of (subsystems, ITR, punch lists, MC/RFCC, completion dossiers).&nbsp;</li> <li><strong>Documentation</strong>: To make sure of the readiness of procedure and dossier to be ready for the activities. Review and validate commissioning procedures, JSA, energization dossiers, LoTo, PSSR…And to prepare all the handover of the phase Precom - Commissioning.</li> <li><strong>Coordination</strong>: Coordinate Mechanical Completion, pre-commissioning, commissioning and start-up activities while securing interfaces and SIMOPS.</li> <li><strong>Reporting</strong>: Run daily and weekly review meetings with Construction, CSU and Company Representative.</li> <li><strong>Handover</strong>: Deliver the closure of punch lists (A/B), remarks clearance and handover to operations.<br> &nbsp;</li></ul><br>Qualifications:<br><p><strong>What makes you remarkable?&nbsp;</strong></p><br><p>At Wood, we are committed to equal opportunities and welcome all talented individuals to consider joining our team. So even if you don't match every statement below but feel you have some of the experience, knowledge or skills needed for this role, we encourage you to apply. It will take all of us working together to deliver solutions to the world’s most critical challenges.&nbsp;&nbsp;</p><br><p><strong>Expected:</strong></p><br><ul> <li>Engineering degree (MSc / BSc) in chemical, mechanical, electrical, instrumentation engineering or equivalent.</li></ul><p><strong>Experience:</strong></p><br><ul> <li><strong>Experience</strong>: Minimum 15 years of experience in commissioning and start-up of Oil &amp; Gas / LNG / petrochemical facilities.</li> <li><strong>Projects</strong>: Proven track record on at least two (2) gas plant, LNG or refinery projects delivered in fast-track mode.</li> <li><strong>Methodology</strong>: knowledge of OPERCOM and Orbit is a plus.</li> <li><strong>Environment</strong>: Previous experience working for a major international operator and managing multi-discipline contractors.</li></ul><p><strong>Technical Skills:</strong></p><br><ul> <li>In-depth knowledge of subsystems, ITR, MC, RFCC, punch lists and system completion.</li> <li>Full command of HSE, ATEX, PtW, LoTo, safety inhibition and PSSR procedures.</li> <li>Strong understanding of process equipment, rotating, HV/LV electrical, F&amp;G, ESD/PSD and ICSS systems.</li> <li>Proficiency with completion management tools (ICAPS or equivalent).</li></ul><p><strong>Personal Qualities:</strong></p><br><ul> <li><strong>Leadership</strong>: Ability to challenge contractors and enforce priorities.</li> <li><strong>Adaptability:</strong> Comfort in fast-track, multicultural and high-pressure environments.</li> <li><strong>Rigor</strong>: Strong reporting discipline, documentation rigor and clear communication.</li> <li><strong>Diplomacy</strong>: Team spirit and diplomacy at Company / EPC / Vendor interfaces.</li></ul><p><strong>Languages:</strong></p><br><ul> <li>Fluent professional English (mandatory).</li> <li>French appreciated. Arabic is a plus.</li></ul><p><strong>Conditions:</strong></p><br><ul> <li>Site-based assignment in Iraq, Rotational.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>We are currently seeking for passionate and dynamic Maintenance professionals who pride themselves on their ability to deliver extraordinary levels of customer service and provide creative solutions to our guests.<br><br>As a Duty Engineer you are responsible for all the mechanical and technical maintenance and HVAC equipment within your property and your role will include key responsibilities such as:<br><br>• Supervise and control the preventive maintenance schedule<br>• Be responsible for the health safety of the property<br>• Follow the preventive maintenance chart strictly and maintain records for future reference<br>• Coordinate with other department’s counterparts to ensure their satisfaction on quality and progress<br>• Create departmental training programmes among engineering employees and create opportunities to multitask<br>• Distribute the work to subordinates accordingly to their capabilities in order to get the best results to the specified standards</p> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <strong>Job Title:</strong> Wireline Engineer<br> <strong>Location:</strong> Iraq&nbsp;<br> <strong>Industry:</strong> Oil &amp; Gas&nbsp;<br> <strong>Department:</strong> Wireline Services<br><strong>Job Summary</strong><br>The Wireline Engineer is responsible for planning, executing, and supervising wireline operations for oil and gas wells in accordance with company, customer, and HSE standards. The role includes operating wireline equipment, acquiring and validating downhole data, performing perforating and logging services, maintaining operational efficiency, and ensuring safe execution of field activities.<br><strong>Required Qualifications</strong><br><ul><li>Bachelor's Degree in Engineering Discipline.</li><li>3–10+ years of wireline field experience in oil &amp; gas operations.</li><li>Experience with Open Hole and/or Cased Hole wireline services.</li></ul><br>With over 90 years' combined experience, NES Fircroft (NES) is proud to be the world's leading engineering staffing provider spanning the Oil &amp; Gas, Power &amp; Renewables, Chemicals, Construction &amp; Infrastructure, Life Sciences, Mining and&nbsp;Manufacturing&nbsp;sectors worldwide. With more than 80 offices in 45 countries, we are able to provide our clients with the engineering and technical expertise they need, wherever and whenever it is needed. We offer contractors far more than a traditional recruitment service, supporting with everything from securing visas and work permits, to providing market-leading benefits packages and accommodation, ensuring they are safely and compliantly able to support our clients. <br><br> </div>

<p>Responsible of RNCs, BSCs, transport (IP &amp; microwave), CME/power maintenance in addition to Operation &amp; maintenance for all sites in area which including all bands 2G,3G &amp; LTE . Site configuration of parameters to follow RF requests, modify TR equipment s, and work on NET echo Field troubleshooting &amp; fix problem for TR microwave, RAN and CME/power. Support to the other department upon requests. Daily Check all BTS &amp; MW, CME clearance alarm, close TKT &amp; resolving and following up all pending issues. Acceptance and on-air new sites or expansions. Daily task O&amp;M follow up. follow up CME maintenance subcontractor. Team work &amp; CR implementations. Network performances &amp; KPI with outage follow up. Daily report to Cluster Supervisor.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>B.sc degree (Telecommunication Engineering or Electrical Engineering or equivalent degree).</li><li>Graduate or 1-year experience.</li><li>Having a Valid Engineers Union ID Card .</li></ul><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership Building Customer Value Networking &amp; Influencing Collaboratively Leading Teams Driving Change .</p><p>Technical Competencies: Access Network Operations Network Monitoring Problem Solving Service Operations Center (SOC) Technical Writing and Reporting Troubleshooting &amp; Technical Problem Solving.</p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Responsible of RNCs, BSCs, transport (IP &amp; Microwave), CME/power maintenance in addition to Operation &amp; maintenance for all sites in area which including all bands 2G,3G &amp; LTE.</p><p>1-Site configuration of parameters to follow RF requests, modify TR equipment s, and work on NET echo</p><p>2-Field troubleshooting &amp; fix problem for both TR Microwave, RAN and CME/Power.</p><p>3-Support to the other department upon requests.</p><p>4-Daily Check all BTS &amp; MW, CME clearance alarm, close TKT &amp; resolving and following up all pending issues.</p><p>5-Acceptance and on-air new sites or expansions.</p><p>6-Daily task O&amp;M follow up.</p><p>7- follow up CME maintenance subcontractor</p><p>8-Team work &amp; CR implementations.</p><p>9-Network performances &amp; KPI with outage follow up.</p><p>10-Daily report to Cluster Supervisor.</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"><b>B.sc degree (Telecommunication Engineering or Electrical Engineering or equivalent degree).</b><br><b>3-5 years experience</b><br><b>Having a valid Engineer's union ID Card</b><br><br><b>Behavioral Competencies:</b><br></p><ul><li>Delivering Results &amp; Fostering Ownership</li><li>Building Customer Value</li><li>Networking &amp; Influencing Collaboratively</li><li>Leading Teams</li><li>Driving Change</li></ul><br><b>Technical Competencies:</b><br><ul><li>Access Network Operations</li><li>Network Monitoring</li><li>Problem Solving</li><li>Service Operations Center (SOC)</li><li>Technical Writing and Reporting</li><li>Troubleshooting &amp; Technical Problem Solving</li></ul><p></p></section>

<p>To install, assemble, align, and complete Gas Turbines, Steam Turbines, generators, and auxiliary mechanical equipment safely and accurately. To ensure all installation and alignment work meets OEM specifications, project quality standards, and HSE requirements. To support mechanical completion, inspection, commissioning, and punch-list clearance activities.</p><p>Install and assemble Gas Turbines, Steam Turbines, generators, and auxiliary equipment. Perform precision alignment of rotating equipment using laser alignment and conventional methods. Install bearings, couplings, seals, diaphragms, casings, valves, and piping connections. Carry out dimensional checks, equipment elevation, centerline, and tolerance verification as per OEM requirements. Assist with turbine casing assembly, rotor installation, rotor coupling, and turning gear installation. Perform flange assembly and controlled bolting/hydraulic torqueing. Conduct inspection, flushing, preservation, and mechanical completion activities. Support commissioning and mechanical run-test activities when required. Participate in punch-list clearance and quality inspections. Maintain installation records, inspection reports, and quality documentation. Follow all HSE requirements, work permits, safety procedures, and site instructions. Coordinate effectively with mechanical, electrical, commissioning, QA/QC, and other site teams.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>Minimum 5 years of experience in rotating equipment installation.</li><li>Experience in power plant construction projects.</li><li>Knowledge of Gas Turbine, Steam Turbine, Generator, and auxiliary equipment installation.</li><li>Ability to read and interpret mechanical and assembly drawings.</li><li>Knowledge of turbine alignment, rotor installation, and flange assembly.</li><li>Familiarity with Dial Indicators, Micrometers, Feeler Gauges, Precision Levels, and Laser Alignment Systems.</li><li>Knowledge of hydraulic torqueing and mechanical assembly practices.</li><li>Ability to understand and follow OEM installation drawings and manuals.</li><li>Good English communication and reading ability.</li></ul>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>E&amp;I Engineer<br><br>E&amp;I EngineerECSS30 - Sr. Specialist, Commissioning<br><p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p><br><br><br><p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site. Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers. Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability or operations. Skills are typically acquired through an undergraduate degree in Engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p><b>Title:</b></p><br><br>Lead Process Engineer<br><br><p><b>Job Description</b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b><i>"Belong, Connect, Grow, with KBR!</i></b></p><br><br><br><p><b><i>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</i></b></p><br><br><br><p><b><i>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets."</i></b></p><br><br><br><p><b>Position: Lead Process Engineer</b></p><br><br><p><b>Company: KBR </b></p><br><br><p><b>Project: Majnoon</b></p><br><br><p><b>Location: Basra. 28/28 rotation</b></p><br><br><br><p><b>Job Purpose</b></p><br><br><p>The Lead Process Engineer will own the technical integrity and successful delivery of process engineering scope across projects at different stages (Conceptual Studies, Front-End Design (FEED), and Detailed Engineering) for oil and gas field developments, including upstream offshore/onshore, gas treating, and downstream processing, in greenfield and brownfield environments. This role leads a team of engineers within a multidisciplinary project team, ensuring compliance with industry standards and project specifications, driving technical excellence, and fostering the development of Iraqi national staff.</p><br><br><br><p><b>Job Responsibilities</b></p><br><br><ul><li>Lead the preparation and review of process simulations and optimization studies for select/appraise stage projects, and champion the development of Process Flow Schemes with heat and mass balances, equipment sizing, layout, etc., for costing and option selection.</li><li>Own the detailed process engineering deliverables across all design phases, including Process Flow Diagrams, Piping &amp; Instrumentation Diagrams, Equipment Datasheets, Study Reports/Manuals, etc., ensuring alignment with international standards and project requirements.</li><li>Oversee the review of process design work by third parties (vendors) and other offices; champion participation in HAZIDs, HAZOPs, SIL, Hazard Analysis reviews, and audits; ensure timely issue resolution and closure.</li><li>Act as the primary technical interface with clients, communicating complex concepts clearly in both written and verbal formats; manage client expectations and confirm technical commitments.</li><li>Mentor and actively develop Iraqi national staff to fulfill process engineering roles, providing structured on-the-job training, performance feedback, and growth opportunities.</li><li>Ensure adherence to office quality and safety systems; lead the implementation of quality assurance/quality control practices within the process discipline.</li><li>Collaborate with other disciplines to drive on-time, efficient, and safe project delivery; lead technical risk management and issue resolution within the process scope.</li><li>Lead the technical supervision of FEED and Detailed Engineering activities for offshore/onshore greenfield/brownfield projects, ensuring design integrity and constructability.</li><li>Support procurement activities by providing authoritative technical input for equipment selection and vendor evaluation, including evaluation of bid technical clarifications.</li><li>Participate in commissioning and start-up activities, providing seasoned technical support and facilitating smooth handover to operations.</li></ul><br><p><b>Functional Responsibilities</b></p><br><br><ul><li>Maintain and further develop process engineering standards, best practices, and technical governance within the project teams.</li><li>Lead risk assessments and develop comprehensive mitigation strategies for process-related issues; own the risk register for the process discipline.</li><li>Ensure timely delivery of all process engineering deliverables in accordance with project schedules; manage resource planning and workload distribution within the team.</li><li>Provide technical leadership in design reviews, technical compliance, and governance for all process workstreams.</li><li>Support and guide procurement activities with robust technical input for equipment specifications, vendor selection, and qualification.</li><li>Lead commissioning and start-up activities from a process perspective, delivering technical support, commissioning procedures, and start-up readiness reviews.</li></ul><br><p><b>Technical Skills</b></p><br><br><ul><li>Extensive experience in FEED and Detailed Engineering design for offshore/onshore greenfield/brownfield projects.</li><li>Proficiency in process simulation software (e.g., Aspen HYSYS, Flare System Analyzer, ProMax, Pipesim, Pipenet, others).</li><li>Strong knowledge of process safety management and hazard analysis techniques.</li><li>Familiarity with relevant industry codes and standards (e.g., API, ASME, ISO).</li><li>Experience with process control systems and instrumentation.</li></ul><br><p><b>Soft Skills</b></p><br><br><ul><li>Leadership and team management skills.</li><li>Strong communication and interpersonal skills.</li><li>Ability to work collaboratively in a multidisciplinary environment.</li><li>Problem-solving mindset with a focus on innovation and efficiency.</li><li>Adaptability to changing project requirements and priorities.</li></ul><br><p><b>Qualifications</b></p><br><br><ul><li>Mandatory:&nbsp;Bachelor’s degree in engineering (Chemical, Process, or related field).</li><li>Preferred:&nbsp;Master’s degree in engineering (Chemical, Process, or related field) and/or membership of internationally accepted applicable professional Institute.</li><li>10 years of experience in process engineering within engineering Contractors, with a focus on FEED and EPC design for upstream onshore/offshore greenfield/brownfield projects.</li></ul><br><p><b>Work Environment</b></p><br><br><p>The role will be based in Iraq, requiring collaboration with local and international teams. The work environment is dynamic and fast-paced, necessitating flexibility and a proactive approach to challenges.</p><br><br><br><br><br><br><br> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>&nbsp;<strong>Launch Your Career as a Field Engineer with Weatherford</strong></p><br> <p>Are you ready to kick-start your engineering career in a hands-on, high-impact role? At Weatherford, our Field Engineers are the essential connection between our cutting-edge technologies and the real-world challenges faced in oil and gas rigs.&nbsp;</p><br> <p>This is more than just a job — it’s an adventure. You’ll be working in the field, often at remote rig sites, where you’ll gain unmatched experience and responsibility from day one. Whether it’s assembling equipment, analysing data, or solving problems on the fly, you’ll be at the heart of operations that matter.&nbsp;</p><br> <p><strong>Your Development Journey</strong>&nbsp;</p><br> <p>You’ll be enrolled in our 4-year Field Engineer Technical Development Program, which blends classroom learning with real-world experience:&nbsp;</p><br> <ul> <li>Year 1: Work with guidance and take part in hands-on training at one of our global centers. Travel may be needed to gain real-world experience</li> <li>Year 2: Take on more responsibility at the wellsite while continuing to grow your technical skills through hands-on and classroom training</li> <li>Years 3 &amp; 4: Expanding your knowledge and skills, and may lead teams at the wellsite while serving as the main contact for our clients</li> </ul> <p><strong>Your day-to-day could include:&nbsp;</strong></p><br> <ul> <li>Prepare, deploy, and operate advanced downhole tools to meet specific wellsite objectives</li> <li>Utilize cutting-edge simulation software to design and optimize wellsite solutions tailored to client needs</li> <li>Analyse performance data and recommend improvements&nbsp;</li> <li>Manage&nbsp;equipment logistics and ensure seamless setup and operation at the rig site</li> <li>Create detailed post-job reports and share actionable insights with clients and internal teams</li> <li>Champion a culture of continuous improvement with a strong focus on safety, quality, and performance</li> <li>Deliver front-line engineering support to our customers throughout operations, resolving issues independently</li> </ul> <p><strong>What We’re Looking For</strong>&nbsp;</p><br> <ul> <li>Graduated with bachelor’s degree in engineering (all fields) within the last 24 months</li> <li>No more than 1 year of experience</li> <li>English language fluent proficiency (written and spoken)</li> <li>Strong communication and interpersonal skills</li> <li>Ability to analyse complex problems, apply critical thinking, and make informed decisions</li> <li>A passion for hands-on work and learning in dynamic environments&nbsp;(onshore and offshore)</li> </ul> <p><strong>What to Expect</strong>&nbsp;</p><br> <p>This role is physically and mentally demanding. You’ll work 12-hour shifts (day or night), often in tough weather conditions. You may be away from home for extended periods, including weekends and holidays. But if you’re up for the challenge, the rewards are big.&nbsp;</p><br> <p>You’ll join one of our specialized product lines, such as:&nbsp;</p><br> <ul> <li>Completions&nbsp;</li> <li>Drilling Services&nbsp;</li> <li>Wireline Services&nbsp;</li> <li>Artificial Lift&nbsp;</li> <li>Well Services&nbsp;</li> <li>Managed Pressure Drilling…and many more&nbsp;</li> </ul> <p>&nbsp;<strong>Why Join Us?</strong>&nbsp;</p><br> <ul> <li>Fast-track your career with structured development and mentorship&nbsp;</li> <li>Work with cutting-edge technology in real-world settings&nbsp;</li> <li>Travel, learn, and grow with a global leader in energy services&nbsp;</li> <li>Open doors to future roles in operations, product management, sales, and more&nbsp;</li> </ul> <p>Ready to engineer your future? Apply now and start your journey with Weatherford</p><br> <br><br> </div>