وظائف مهندس ميكانيكا معدات ثقيلة - البصره العراق

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Mechanical Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing mechanical installation works for static and rotary equipment within an EPC oil &amp; gas construction project. The role ensures that all installation activities are performed safely, in compliance with project specifications, approved drawings, international standards, and HSE requirements.</p><p><br></p><p>The Mechanical Engineer will coordinate closely with construction, QA/QC, piping, commissioning teams, and subcontractors to ensure proper installation, alignment, testing, and timely project delivery while maintaining quality and safety standards throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise installation of static equipment including pressure vessels, heat exchangers, columns, tanks, separators, and other process equipment in accordance with approved drawings and specifications.</p></li><li><p>Oversee installation, alignment, and grouting of rotary equipment including pumps, compressors, blowers, and package units as per manufacturer requirements and project standards.</p></li><li><p>Monitor piping installation works including supports, fit-up, routing, and hydrotest preparation to ensure compliance with approved isometrics and piping layouts.</p></li><li><p>Verify equipment foundation preparation, anchor bolt positioning, and base plate leveling prior to equipment erection.</p></li><li><p>Ensure proper execution of cold and hot alignment, shaft alignment, and pre-commissioning mechanical checks for rotating equipment.</p></li><li><p>Review mechanical drawings such as GA drawings, P&amp;IDs, isometrics, vendor drawings, and method statements to ensure correct site implementation.</p></li><li><p>Coordinate with QA/QC for inspections, material verification, NDT requirements, hydrostatic testing, and mechanical completion documentation.</p></li><li><p>Interface with other disciplines including E&amp;I and civil teams to ensure proper coordination of mechanical installations.</p></li><li><p>Ensure compliance with international standards such as ASME, API, and project technical specifications.</p></li><li><p>Support pre-commissioning and commissioning activities including flushing, leak testing, mechanical run tests, and system handover to operations.</p></li><li><p>Participate in daily progress meetings, monitor subcontractor performance, and report progress to the Construction Manager.</p></li><li><p>Ensure strict adherence to HSE regulations, conduct risk assessments, and ensure safe mechanical lifting, rigging, and installation activities on site.</p><p><br></p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Mechanical Engineering or a related field.</p></li><li><p>Good knowledge in mechanical engineering principles, particularly in the oil and gas sector.</p></li><li><p>Knowledge of the design and process of oil and gas plants</p></li><li><p>Understanding of maintenance and troubleshooting techniques of equipment involved in field services and EPC operations.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Effective communication and teamwork abilities.</p></li><li><p>Ability to learn quickly and adapt to new tools and technologies.</p></li><li><p>Familiarity with industry standards and safety regulations is an advantage.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>The Electrical &amp; Instrumentation (E&amp;I) Engineer will be based on-site in Basra, Iraq, and will be responsible for supervising and executing electrical and instrumentation installation works for an EPC oil &amp; gas construction project. The role ensures that all site activities are performed safely, in compliance with approved drawings, project specifications, international standards, and HSE requirements.</p><p><br></p><p>The E&amp;I Engineer will coordinate closely with construction, QA/QC, engineering, commissioning teams, and subcontractors to ensure proper installation, testing, pre-commissioning, and timely project delivery while maintaining quality, safety, and schedule objectives throughout the project lifecycle.</p><p><br></p><ul><li><p>Supervise and execute all electrical installation activities including MV/LV systems, transformers, switchgear, MCCs, distribution panels, UPS systems, and associated power infrastructure in accordance with approved drawings and project specifications.<br></p></li><li><p>Monitor and control cable tray installation, cable pulling, glanding, termination, and testing activities, ensuring compliance with method statements, ITPs, and international standards.<br></p></li><li><p>Ensure proper installation of earthing and grounding systems, lightning protection systems, and hazardous area electrical equipment (Ex-rated equipment) as per project and safety requirements.<br></p></li><li><p>Supervise installation of field instrumentation including pressure, temperature, flow, and level transmitters, control valves, analyzers, junction boxes, and marshalling cabinets.</p></li></ul><br><ul><li><p>Oversee instrument tubing works, impulse line installation, supports, tagging, and identification to ensure alignment with engineering drawings and hook-up details.<br></p></li><li><p>Support loop checking, calibration, pre-commissioning, and commissioning activities in coordination with the commissioning team and client representatives.</p><br></li><li><p>Review and interpret technical documents including single line diagrams (SLDs), wiring diagrams, hook-up drawings, cable schedules, and layout drawings to ensure accurate site execution.</p></li></ul><br><ul><li><p>Coordinate with construction, QA/QC, engineering, and subcontractor teams to resolve technical issues and ensure smooth workflow and timely project execution.</p></li></ul><br><ul><li><p>Ensure all installation works are performed in compliance with project specifications, international standards (IEC, NEC, API where applicable), and contractual requirements.</p></li></ul><br><ul><li><p>Participate in inspections, raise RFIs where required, support punch list clearance, and ensure proper documentation and as-built records are maintained.</p></li></ul><br><ul><li><p>Enforce strict adherence to HSE policies, conduct risk assessments, participate in toolbox talks, and ensure safe execution of works within live plant or hazardous areas.</p></li></ul><br><ul><li><p>Monitor daily site progress, report to the Construction Manager /Project Manager, and ensure activities are completed within approved schedules and cost parameters</p></li></ul></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li><p>Bachelor's degree in Electrical Engineering, or a related field</p></li><li><p>Experience working on oil and gas EPC projects</p></li><li><p>Strong understanding of oil and gas process systems and equipment, with a focus on flare gas recovery systems.</p></li><li><p>7-10 years experience in static, rotary equipment installation.</p></li><li><p>Knowledge of piping and general mechanical works.</p></li></ul><p></p></section>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p><h4>E&I Engineer</h4> <p>KBR Sustainable Technology Solutions (STS) provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design capabilities, and smart solutions to optimize planned and operating assets.</p> <p>Responsible for start-up and plant operations activities including equipment and system checkout, inspection for proper installation, review for correct design, and calculation of expected system and equipment operating parameters under temporary start-up conditions. Coordinates start-up operations, including the direction of craft, and all other start-up activities such as flushing, chemical cleaning, and initial equipment and system operation. Coordinates performance tests and calculates test results and heat balances. Performs calculations required to properly evaluate design changes, provides engineering reports for the engineering department to assist in design change preparation. Works with client at the site.</p> <p>Under general supervision, performs all conventional aspects of the functional area subject matter. Devises new approaches to problems encountered. Plans, schedules, and conducts work requiring judgment in the independent evaluation, selection, and adaptation of engineering techniques, procedures, and criteria. Performs work which involves conventional engineering practice but may include a variety of complex features such as conflicting design requirements, unsuitability of conventional materials, and difficult coordination requirements. Provides technical guidance to designers and less experienced engineers.</p> <p>Job tasks, correctly performed, impact indirectly on cost containment, efficiency, profitability, or operations. Skills are typically acquired through an undergraduate degree in engineering and a minimum of 10 years related experience, with average experience ranging from 10-15 years.</p></p><p></p>

<p>Rutledge group started out in 1981 provides quality safety services to the oil &amp; gas, petrochemical, specialty chemicals, engineering and construction industries. We provide total safety management support services on site, in areas of safety H2S, HSE, training, rental of safety equipment, service and maintenance of equipment.</p><p>&nbsp;</p><p><strong>Job Description</strong></p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct well site survey for offshore, onshore installations, prepare schematics of both gas detection and breathing air cascade system, Installation of fixed-point sensors, wireless gas detection based on client well plan.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the H2S Unit / Container installation at the site and rig up/ setting up all necessary fixed or remote gas detection systems, alarms and ensure their safety aspects.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Continuously monitor all the H2S equipment, the gas detection system and H2S alarm control panel on the site</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Maintain, Service and Testing of all in-house and client equipment to ensure they are in ready-to-go state.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Trouble shoot, repair, test, and commission the full range of safety equipment in the field.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Monitor and record H2S gas concentration on various activities such as Well Test Operations, Sour gas flaring, Coring, DST, TCP operations.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Gas sampling such as H2S, LEL, CO2, SO2 and other gases if and as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct On site H2S Safety Induction, trainings, conduct emergency safety drills and ensure personnel proficiency in usage of the Breathing Equipment.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare site specific H2S induction training if required by Client.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate safety meetings and toolbox talks.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Participate in STOP card &amp; NUHS programme</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare Contingency Plans, Emergency Response Plan, Equipment maintenance report on equipment and internal audits.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Discuss the observations and areas of improvements with onsite HSE and Company’s representatives.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Conduct regular Simulated Drills (i.e.H2S Drills, Man Down Drill, Muster Drill as per Company’s guidelines and schedules.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Supervise the emergency situations because of H2S release, provide recommendations to handle the situations and suggest the best practice methods to work under mask to control the situations for different operations e.g. well control etc.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the field Rutledge ISO reports on inspections, repairs, calibrations, testing, training records, inventories, drills etc. to Company representative and operations manager as required.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Assist in confined space entry &amp; gas testing.</p><p>•&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Prepare and submit the Customer Satisfaction Quality Questionnaire.</p><p><strong>Requirements</strong></p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Petroleum/Oil/Gas), Geology/Geophysics or equivalent.</p><p>·&nbsp; &nbsp; &nbsp; &nbsp; Preferable with 2-5 years working experience in the oil &amp; gas industry or petrochemical facilities.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Previous work experience as an offshore rig personnel such as electrical, drilling, mudlogging or safety is a definite advantage.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Candidates without prior experience but have worked in drilling well sites or petrochemical facilities are welcome to apply.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Able to stay at Client’s well sites for an extended duration.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; A positive attitude with good problem-solving skills, creativity, displaying initiative and willing to work in a multi-cultural environment.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Capable of representing Company before Clients and for business development.</p><p>·&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Bilingual in English and Arabic.</p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Division</h4> <p>CSSP (Ratawi Hub – Iraq)</p> <p><strong>Direction:</strong> IM</p> <p><strong>Situation in organization</strong><br> Within the Project Organization, the Lead Interface Engineer reports to the Interface Manager.</p> <p><strong>Job location(s):</strong> CPP Office (Abu Dhabi, UAE) during detailed engineering phase / site (Iraq) during construction phase.</p> <h4>Job dimensions</h4> <p>The Lead Interface Engineer shall assist the Interface Manager on the following:</p> <ul> <li>Take care of the overall management of interface and data changes between stakeholders of the Common Seawater Supply Project, and provide advice on any schedule and commercial issues arising from such interfaces and changes.</li> <li>Ensure that interface management procedures are in place and that EPC and other contractors implement the required interface management system throughout the project duration.</li> </ul> <p>The Lead Interface Engineer is anticipated to start early 2026 and will be based in Abu Dhabi (UAE).</p> <h4>Activities</h4> <p>The job holder shall assist the Interfaces Manager:</p> <ul> <li>With the support of the Project Management Consultant, define, implement and maintain the methodology/procedure to be applied and the corresponding database to be created, to ensure a clear and accurate identification and management of interfaces. This procedure will be as efficient and simple as possible and will be used throughout the life of the project and shall be applied by the different entities/contractors.</li> <li>Management of interface and change data between parties, monitor and control interface and change issues, in order to resolve interface and change issues in a timely and organised manner according to the project interface and change control procedures.</li> <li>Attend major interface meetings, internal and external with other entities of CSSP Project, contractor representatives, vendors, TotalEnergies specialists, partner’s experts, etc. Lead interface and other technical meetings as required.</li> <li>Ensure that HSE requirements are systematically considered all along the interface management process and in particular that interfaces are properly addressed during HAZID/HAZOP/PTR project audits.</li> <li>Consolidate and advise the Project Director and Technical and Project Control Managers of any risks, especially schedule and commercial issues arising from interfaces and changes. Shall be the coordinator of the Management of Change, providing the justification through all disciplines of the change. Ensure complete documentation of all changes, and communication of these in compliance with the processes agreed with BOC and regulatory authorities.</li> <li>Prepare technical papers to support management positions for clarifications or decisions with regulatory authorities of host countries, other entities or partners.</li> <li>Ensure that EPC Contractor implements required interface management system and resources and monitor throughout the project duration that EPC Contractor honours its responsibilities as defined in the project interface procedure.</li> <li>Ensure the implementation of interface changes/optimisations resulting from negotiations of the external interfaces.</li> <li>Together with Project Management Consultant, ensure design consistency and continuity throughout the facilities.</li> <li>Avoid change orders and delays caused by interface issues; ensure timely follow-up of interface issues.</li> <li>Assist the Project Management Consultant, prior to and during construction phase, by anticipating operational interfaces with other parties (clashes or conflicting program).</li> <li>In case of SIMOPS (phased delivery of the plant): propose solutions and participate in definition and resolution.</li> </ul> <h4>Context and environment</h4> <p>Basrah Oil Company (BOC) is undertaking the Seawater Treatment Facilities (STF) project to provide treated seawater to the oil fields in southern Iraq (for injection). The STF will be located on the west side of the Khor Al Zubair, upstream of the port of Umm Qasr and will have the following key components:</p> <ul> <li>Site development and non-process facilities.</li> <li>Ancillaries and buildings.</li> <li>Seawater intake and outfall structures.</li> <li>Material off-loading facility.</li> <li>Seawater clarification, filtration and deoxygenating processes.</li> <li>Chemical addition systems.</li> <li>Shipping pumps.</li> <li>Power generation.</li> <li>Utilities.</li> </ul> <p>FEED was completed (June 2016) with Phase 1 capacity of 7.5 million barrels of water per day (MMBWPD) of treated seawater, with a subsequent Phase 2 of 5 MMBWPD for a total buildout capacity of 12.5 MMBWPD. The project was placed on hold upon the completion of FEED.</p> <p>In 2018 BOC launched a call for tender on the FEED, but instructed bidders to reduce capacity to 5.0 MMBWPD, with provision for a future addition of 2.5 MMBWPD for a total build-out phase of 7.5 MMBWPD.</p> <h4>Accountabilities</h4> <p>Accountable for the interfaces and management of change (MoC), being internal (between units, disciplines, PMT, One Tech and specialists) or external (between other CSSP projects, contractors, company, etc.). The job holder coordinates all interface and MoC matters, protecting the WI Project and company’s position with regards to all external interfaces and to internal interfaces between contractors, and ensuring that changes are evaluated and executed for the overall benefit of the project.</p> <p>Accordingly, the job holder shall make the necessary coordination between all involved contractors/parties and company teams and implement an agreed interface management procedure and methodology. He/she shall ensure the proper and timely follow-up and resolution of interface issues between the various involved parties documents. He/she must support the Interface Manager to ensure full control of the Management of Change process, and shall document all the changes, taking care to perform a full review with various disciplines with project aspects to justify or reject the change.</p> <p>A key aspect of interface coordination is the ability to effectively communicate, across all involved parties, all details related to an interface, including requirements, technical specifications, and potential issues. It is important that the communication channel is promptly established, the proper information is exchanged, and all involved parties acknowledge that they fully understand the interface requirements.</p> <p>The nature of the development might call for a “staged” delivery of the facilities. Simultaneous activities between construction activities and operations activities can occur to meet the agreed schedule.</p> <h4>Qualification</h4> <ul> <li>Degree in engineering.</li> </ul> <h4>Experience</h4> <ul> <li>15 years of relevant experience in industrial projects.</li> <li>A sound multi-discipline technical background complemented by a sound knowledge on onshore surveys campaigns and civil works experience.</li> <li>Very good communication and interpersonal skills and capacity to work in a “transverse” organisation.</li> <li>Mastering English is a must, knowledge of French and Arabic is a plus.</li> </ul></p><p></p>

<p><h4>Field operator</h4> <p>Under direct supervision, assigned daily work. May explain instructions and documentation to plan work activities. Helps coordinate movement of materials and equipment to work locations and sets up work site. Completes and reviews records, maintains tools and equipment, and performs various clean up activities. Job may require moderate to heavy lifting. Observes and follows all safety rules and procedures, including wearing required personal safety equipment. Requires a high school diploma or equivalent and 2 years of experience.</p></p><p></p>

<p><h4>Field operator</h4> <p>Under direct supervision, assigned daily work. May explain instructions and documentation to plan work activities. Helps coordinate movement of materials and equipment to work locations and sets up work site. Completes and reviews records, maintains tools and equipment, and performs various clean up activities. Job may require moderate to heavy lifting. Observes and follows all safety rules and procedures, including wearing required personal safety equipment. Requires a high school diploma or equivalent and 2 years of experience.</p></p><p></p>

<p>Install, maintain, troubleshoot, and repair heavy industrial electrical systems. Ensure safe and reliable operation of electrical equipment. Support preventive maintenance, breakdown maintenance, and commissioning activities.</p><p>Install, inspect, troubleshoot, and repair heavy electrical systems. Perform preventive and corrective maintenance of industrial equipment. Diagnose faults in motors, transformers, generators, MCCs, and switchgear. Carry out cable laying, termination, and panel wiring. Test electrical equipment using appropriate measuring instruments. Replace faulty electrical components and restore equipment operation. Support commissioning and startup activities. Maintain maintenance records and inspection reports. Ensure compliance with electrical safety standards and LOTO procedures. Coordinate with mechanical and production teams to minimize downtime. Maintain housekeeping and cleanliness of electrical panels and work areas. Report equipment abnormalities promptly.</p><p><strong>Desired Candidate Profile</strong></p><p>Minimum 10th Pass with ITI/Diploma in Electrician, Electrical Maintenance, or Electrical Mechanic. 3 5 years of experience in heavy industrial electrical maintenance. Knowledge of AC/DC motors, transformers, generators, MCCs, switchgear, and control panels. Ability to read electrical drawings and schematics. Familiarity with multimeter, clamp meter, megger, and insulation tester. Understanding of preventive and breakdown maintenance. Basic PLC knowledge is an advantage. Knowledge of LOTO procedures and electrical safety standards.</p>

<p>Determine, review and establish the local and international policies, standards and specifications required for mechanical engineering work related to building construction and refurbishment, water supply stations and water wells, water supply networks for the project in Iraq. Carry out inspections of the water supply facilities to be constructed, assess the current situation of the mechanical systems, and design suitable upgrades/replacement of existing mechanical systems to meet the local and international standards and specifications applicable, and in consultation with all stakeholders. And or, propose, design the replacements and new installations. Prepare and/or review detailed mechanical engineering design documentation including drawings, specifications and scope of work reports to be included in water supply facilities construction tender documents. Prepare quality control and quality assurance documentation related to mechanical engineering work for new water supply facilities. and rehabilitation works. Assist the PM, Deputy PM, Water Supply Engineer and the QA/QC Engineer in the preparation of bidding documents for the new water supply facilities. Supervise on-site works carried out by contractors closely on a day to day basis to ensure quality of the works is monitored and controlled as per specification requirements. Prepare and submit progress reports to the Project Manager/Deputy PM at intervals agreed upon. Ensure safety and health of everyone involved in the project and general public by identifying risks and threats, planning, implementing and maintaining internationally acceptable safety standards in all aspects, at all stages of the project. Ensure all design and construction of water supply facilities and mechanical works is carried out in accordance with and in compliance with industry standards and international best practice energy efficiency principles, standards, guidelines and specification. Provide expert advice to all stakeholders including contractors, PM/Deputy PM, project staff , clients and donor agencies on Mechanical engineering related water supply facilities works where required. Preparing Mechanical drawing package including for new and or rehabilitation works. Preparing Mechanical SOW (scope of work) with technical specification including water wells, pump stations, water supply networks and related works, plumbing and fire protection systems. Designing and preparing a package of water supply and sanitation systems for small and medium scale projects. Using S-pipe and D-pipe or any other relevant and applicable software Create and review technical drawings, plans, and specifications using computer software and prepare design packages in line with client`s design planning manual and design reviewers instructions. Coordinate while required, with design reviewers and incorporate their comments if any. Perform detailed documentation to track project development and design process Ensure project timeline is met and project stays within budget Support the project team in the evaluation and endorsement of objectives and goals of contractor plans, including staffing and budgeting, milestone descriptions, risk management strategies, detailed schedules and scope descriptions, and work breakdown structures Check to assure all materials and /equipment have been tested, submitted and approved. Review all submittals to insure compliance with the plans and specification Inspect all material, equipment and mechanical tools delivered, at the time of receipt, to ensure compliance with submittals, and specifications. Resolve technical problems at site and the certification of construction work at site. Recommend design changes, cost reductions, warranty improvements, and manufacturing issues. Perform other duties as may be assigned. Establishment of procedures with time limits for inspection, sampling and testing of works and all other electrical requirements. Implementation and monitoring of quality assessments. Supervises the Quality Control functions/activities of a project or its parts, including Quality Control inspection schedules and the collection of Quality Records. Review all submittals to insure compliance with the plans and specifi cation Daily/Weekly/ Monthly report to the Project Manager on project progress activities. Project reporting Mechanical Engineer is to be reported to Project Manager (PM)</p><p><strong>Desired Candidate Profile</strong></p><p>Excellent oral and written communication skills. Strong interpersonal skills and ability to work as part of a team Very Good Knowledge in written and oral English and Arabic languages is required. Experience in the usage of computers and software packages (Autodesk AutoCAD, Microsoft office and mechanical design software).</p>

<p><h4>Job description: HVAC mechanical supervisor – oil & gas / power projects</h4> <p><strong>Location:</strong> Majnoon Oil Field, Iraq (Rotation 28/28)<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p><strong>Belong, connect, grow, with KBR!</strong><br> The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.<br> KBR sustainable technology solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job scope</h4> <p>The HVAC mechanical supervisor is responsible for supervising day-to-day heating, ventilation, and air-conditioning activities across Majnoon Oil Field projects. The role ensures safe, reliable, and compliant operation of HVAC systems in accordance with KBR standards, client specifications, and Iraq oil & gas regulatory requirements. The supervisor oversees HVAC technicians, executes maintenance plans, and supports project works including upgrades, shutdowns, and new installations.</p> <h4>Accountability / expectations</h4> <ul> <li>Supervise HVAC technicians and ensure daily tasks are completed safely, efficiently, and in compliance with KBR HSSE requirements.</li> <li>Execute preventive, corrective, and predictive maintenance programs for chillers, package units, split units, ventilation systems, and industrial cooling equipment.</li> <li>Perform technical troubleshooting, root-cause analysis, and diagnostics on mechanical and electrical HVAC components.</li> <li>Ensure adherence to KBR HSSE policies, client standards, and relevant international codes.</li> <li>Review and support preparation of HVAC work permits, job hazard analyses, and method statements.</li> <li>Coordinate with operations, electrical, instrumentation, and projects teams to support field activities and shutdown schedules.</li> <li>Monitor contractor activities, ensuring quality workmanship and compliance with specifications.</li> <li>Maintain accurate documentation including maintenance logs, equipment history, spare-parts records, and inspection reports.</li> <li>Assist project engineering teams with HVAC design reviews, material requisitions, and technical evaluations.</li> <li>Track inventory levels and ensure availability of critical spares and consumables.</li> <li>Train, guide, and mentor HVAC technicians to support competency development and safe work practices.</li> <li>Participate in incident investigations and support implementation of corrective actions.</li> <li>Ensure HVAC systems operate effectively to support critical facilities such as control rooms, substations, accommodation units, and workshops.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in mechanical engineering or HVAC technology.</p> <h4>Experience</h4> <p>Minimum 8 years of HVAC experience in oil & gas, petrochemical, or heavy industrial environments.</p> <h4>Technical & professional requirements</h4> <ul> <li>Strong knowledge of HVAC mechanical systems, refrigeration cycles, ducting, ventilation, and industrial cooling.</li> <li>Experience supervising multi-disciplinary maintenance teams.</li> <li>Solid understanding of HSSE requirements in hazardous environments.</li> <li>Ability to interpret engineering drawings, P&IDs, and technical specifications.</li> <li>Effective communication, leadership, and team-coordination skills.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: HVAC mechanical lead – oil & gas / power projects</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Location:</strong> Majnoon Oil Field, Iraq (Rotation Alignment 28/28)<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The HVAC Mechanical Lead is responsible for overseeing all heating, ventilation, and air-conditioning systems across Majnoon Oil Field Projects. This role ensures safe, reliable, and compliant operation of HVAC assets in line with KBR standards, client specifications, and Iraq oil & gas regulatory requirements. The position leads a team of HVAC technicians, coordinates maintenance activities, and supports project execution for upgrades, shutdowns, and new installations.</p> <h4>Accountability / expectations</h4> <ul> <li>Lead and supervise HVAC teams, ensuring daily tasks are executed safely and efficiently.</li> <li>Manage preventive, corrective, and predictive maintenance programs for all HVAC systems, including chillers, package units, split units, ventilation systems, and industrial cooling equipment.</li> <li>Conduct technical troubleshooting, root-cause analysis, and performance diagnostics on mechanical and electrical HVAC components.</li> <li>Ensure compliance with KBR HSSE policies, client standards, and international codes.</li> <li>Review and approve HVAC work permits, job hazard analyses, and method statements.</li> <li>Coordinate with Operations, Electrical, Instrumentation, and Projects teams to support field activities and shutdown planning.</li> <li>Oversee contractor performance, ensuring quality workmanship and adherence to specifications.</li> <li>Maintain accurate documentation: maintenance logs, equipment history, spare-parts records, and inspection reports.</li> <li>Support project engineering teams with HVAC design reviews, material requisitions, and technical evaluations.</li> <li>Monitor inventory levels and ensure availability of critical spares and consumables.</li> <li>Train and mentor HVAC technicians, promoting competency development and safe work practices.</li> <li>Participate in incident investigations and implement corrective actions to prevent recurrence.</li> <li>Ensure HVAC systems operate efficiently to support critical facilities such as control rooms, substations, accommodation units, and workshops.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree or diploma in mechanical engineering or HVAC technology.</p> <h4>Experience</h4> <ul> <li>10+ years of HVAC experience in oil & gas, petrochemical, or heavy industrial environments.</li> <li>Strong knowledge of HVAC mechanical systems, refrigeration cycles, ducting, ventilation, and industrial cooling.</li> <li>Experience supervising multi-disciplinary maintenance teams.</li> <li>Proven understanding of HSSE requirements in hazardous environments.</li> <li>Ability to interpret engineering drawings, P&IDs, and technical specifications.</li> <li>Strong communication and leadership skills.</li> </ul></p><p></p>

<p><h4>Belong, connect, grow, with KBR!</h4> <p>The KBR team of teams delivers future-forward science, technology and engineering solutions and mission-critical services that help governments and companies around the world accomplish their most important objectives, while also helping achieve their sustainability goals.</p> <p>KBR Sustainable Technology Solutions provides holistic and value-added solutions across the entire asset life cycle. These include world-class licensed process technologies, differentiated advisory services, deep technical domain expertise, energy transition solutions, high-end design and engineering capabilities, and smart solutions to optimize planned and operating assets.</p> <h4>Job description: Superintendent power</h4> <p><strong>Company:</strong> KBR Iraq<br> <strong>Location:</strong> Majnoon Oil Field, Iraq<br> <strong>Rotation:</strong> 28/28<br> <strong>Nationality:</strong> Iraqi nationals preferred</p> <p>The Superintendent Power is responsible for leading, supervising, and coordinating all electrical power generation, distribution, and maintenance activities across the Majnoon Oil Field. This role ensures safe, reliable, and compliant operation of electrical systems supporting production facilities, camps, utilities, and critical infrastructure. Superintendent provides technical leadership, oversees site execution, and ensures alignment with KBR standards and client requirements.</p> <h4>Accountability / expectations</h4> <ul> <li>Oversee daily operation, maintenance, and troubleshooting of power generation units, HV/LV distribution networks, switchgear, transformers, MCCs, and protection systems.</li> <li>Ensure electrical systems operate within design parameters, safety limits, and reliability targets.</li> <li>Lead fault investigations, root-cause analysis, and corrective action implementation.</li> <li>Manage preventive and predictive maintenance programs to minimize downtime and extend asset life.</li> <li>Provide expert guidance on electrical engineering standards, power system design, and safe work practices.</li> <li>Ensure full compliance with KBR HSSE, electrical regulations, and international codes.</li> <li>Review and approve electrical work permits, isolation plans, energization procedures, and switching operations.</li> <li>Maintain accurate documentation, single line diagrams, load studies, and equipment records.</li> <li>Coordinate electrical construction, installation, commissioning, and upgrade activities across the field.</li> <li>Interface with engineering, construction, commissioning, and operations teams to ensure technical alignment.</li> <li>Verify contractor performance, quality of workmanship, and adherence to specifications.</li> <li>Support integration of new facilities into the existing power network.</li> <li>Supervise electrical supervisors, technicians, and contractors across multiple site locations.</li> <li>Ensure competency development, training, and mentoring of Iraqi national workforce.</li> <li>Promote a strong safety culture and enforce compliance with electrical safety rules and LOTO procedures.</li> <li>Liaise with Operations, Maintenance, HSSE, and Planning departments to ensure seamless power support for field activities.</li> <li>Monitor power system performance, load demand, and energy efficiency opportunities.</li> <li>Prepare daily, weekly, and monthly reports on electrical system status, outages, and maintenance KPIs.</li> </ul> <h4>Education</h4> <p>Bachelor’s degree in Electrical Engineering</p> <h4>Experience</h4> <ul> <li>10+ years experience in electrical power systems within oil & gas, petrochemical, or heavy industrial environments.</li> <li>Strong knowledge of HV/LV systems, generators, protection relays, SCADA, and industrial electrical equipment.</li> <li>Proven experience in site-based leadership roles (Superintendent, Supervisor, Lead Engineer).</li> <li>Demonstrated ability to manage multi-disciplinary teams in remote field environments.</li> </ul></p><p></p>

<p>Under direct supervision: The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate. Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>We are looking for the right people - people who want to innovate, achieve, grow and lead. We attract and retain the best talent by investing in our employees and empowering them to develop themselves and their careers. Experience the challenges, rewards and opportunity of working for one of the world's largest providers of products and services to the global energy industry.</p>

<p>The Well Engineer is responsible for well proposals and the Basis of Design. Provides Operation Plans and prepares Programs as well as assures technical integrity of Operations planning and execution. Responsible for the day-to-day surveillance of operations. Responsible for the creation of Approval for Expenditure (AFE) and performs cost control of operations. Participates in risk assessment, forecasts and plans medium and long term needs to meet program requirements, and anticipates operational changes and needs. Prepares equipment lists and identifies long lead items. Ensures proper communication within the project. Performs engineering studies to solve recurring problems. Prepares End-of-Well reports and contributes to knowledge management.</p><p>Additional Role Responsibilities: (1) Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required. (2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p><p>Preferred Experience: Minimum of 10-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p>Job Details Requisition Number: PHONE_NUMBER Experience Level: Experienced Hire Job Family: Engineering/Science/Technology Product Service Line: Halliburton Project Management Full Time / Part Time: Full Time Additional Locations for this position: Compensation Information Compensation is competitive and commensurate with experience.</p><p><strong>Desired Candidate Profile</strong></p><p>(2) Bachelor's degree in Petroleum Engineering or a relevant Engineering specialization (3) Manages all aspects of rig operations including HS&amp;E, detail well planning, well construction, resourcing, cost reporting, performance management, materials and logistics, service company performance and management systems compliance (4) Manages the team, ensures activities are prioritized effectively and that the team delivers results in line with approved plans and timescales. (5) Develops a high level of responsibility and ownership within the team and promotes continuous improvement in the development of technical expertise and competency, standards and practices, commercial awareness and innovative thinking. (6) Demonstrated experience working on diverse, cross-functional teams. (7) Demonstrated Managership skills. (8) Demonstrated ability to manage stakeholders demands and issues on a Global scale. (9) Demonstrated ability to manage projects and deadlines. (10) Excellent communication skills (oral and written). (11) Strong acumen for technology development and innovation.</p><p>Qualifications Requires a Bachelors degree in STEM, preference in Petroleum or Mechanical Engineering, and 4 or more years of well services / intervention experience. Supervisory experience and exposure to Multi-discipline operations is preferred. Must have Well Control Certificate.</p>

<p><h4>Job purpose</h4> <p>To maintain, repair HVAC system in process area. Perform preventive and shutdown maintenance, inspection, repair, installation and commissioning of HVAC i.e. heating, ventilation, air conditioning systems in Majnoon.</p> <h4>Duties and responsibilities</h4> <ul> <li>Maintain, install, and repair HVAC, air conditioning, ventilation and heating systems.</li> <li>Troubleshoot issues with industrial HVAC system.</li> <li>Conduct performance tests with specialized tools and adjust system settings to keep the system reliable.</li> <li>Downloading and uploading programs in PLCs such as Siemens, Schneider, ABB, Mitsubishi, Allen Bradley etc.</li> <li>Troubleshoot and repair the smart VRF HVAC units which are having BLDC motors and programmed electronic cards.</li> <li>Carry out brazing with oxy acetylene set to replace compressors, rectifying copper pipe leaks and modifying refrigerant pipe lines.</li> <li>Repair or replace defective parts in units and equipment and their controls, including thermostats, automatic switches, fan controls, log switches, damper motors, louvers, relays, filters, controls, belts, compressors, heat exchangers, high limit controls, pressure controls.</li> <li>Operate a variety of hand and power tools, brazing torch, vacuum pump, test equipment utilized.</li> <li>Install and calibrate systems; install copper tubing and repair pipes and tubing as necessary; test joints and insulate pipes of HVAC, air conditioning systems; flush rebuild pressure and temperature.</li> <li>Install compressors, evaporators, motors, ducts, and piping as well as mechanical/electrical controls; read and interpret blueprints/diagrams.</li> <li>Troubleshoot breakdowns and repair malfunctioning HVAC systems and components; utilize measuring and testing instruments.</li> <li>Demonstrated exceptional time management skills; organized and prioritized high volume of work orders to ensure maximum quality.</li> </ul> <h4>Qualifications & experience</h4> <ul> <li>University degree in related discipline.</li> <li>8-10 years’ experience of HVAC system and AC units within a large industrial plant, preferably in the oil and gas industry.</li> <li>Understanding of advanced principles of air conditioning, refrigeration and heating.</li> <li>Proficient in reading schematics and work plans.</li> <li>Computer and software skills: <ul> <li>Excel – advanced</li> <li>Word – intermediate</li> <li>PowerPoint – intermediate</li> </ul> </li> <li>Intermediate proficiency in English verbal and written.</li> </ul> <h4>Skills</h4> <ul> <li>Knowledge of materials, methods and tools used in the operation and repair of HVAC.</li> <li>Knowledge of welding and soldering techniques.</li> <li>Proper methods of storing equipment.</li> <li>Aware about PTW system and working in oil field.</li> <li>Have IT skills (Excel, PowerPoint, Microsoft Office, SharePoint etc.).</li> <li>Communicate effectively both orally and in writing.</li> <li>Work cooperatively with others.</li> <li>Work independently with little direction.</li> <li>Meet schedules and timelines.</li> <li>Maintain routine records and prepare reports.</li> </ul></p><p></p>

<p>Under general autonomy and wide scope: The Well Engineering Manager functions as a technical Subject Matter Expert (SME), typically at the Country level staying abreast of current industry and PSL technological developments.</p><p>This position is accountable for the implementation of Engineering processes with respect to quality and integrity assurance. Reviews and maintains HMS processes to ensure the management system remains up-to-date with industry best practices. Responsible for approval of Well Designs and/or Programs and ensures these are in compliance with contracts, as well as, the Company's HMS policies &amp; procedures. Ensures all Operational Activities are adequately evaluated and a full Risk Matrix table with Mitigation plans is completed. Responsible for resolving critical engineering/operational issues, identifying chronic problems and proposing solutions, ensuring optimum technical solutions for field project development, and compliance with all Project/Contract metrics. Coordinates engineering programs/procedures and practices among different Projects and/or Rigs. Supports development of new technology and champions the application and deployment of the same. Leads technical presentations to client. Provides work direction and mentorship on a regular basis to Engineers. Responsible for the training &amp; development of Well Engineers and their competency development. Operates with significant level of technical and/or operational independence in all assigned areas.</p><h4>Additional Role Responsibilities:</h4><ul><li>Ability and flexibility to travel to Iraq both domestically and internationally typically 28/28 days per business required.</li><li>Provides Managership and guidance to both planning and operational teams.</li><li>Demonstrates support of the management system</li><li>Manages all well planning, design and engineering activities associated with drilling, completions and abandonment operations.</li><li>Ensures the team properly consider design options, assess risks and validate costs and work closely with other Wells/technical teams, legislative bodes and service providers at various stages of the well planning process to ensure viability of proposals.</li><li>Manages well operations to effectively control the risk, technical execution, cost control and ensures compliance with policies and procedures.</li><li>Manages operational deviations from Company policy with suitable adherence to the risk assessment process.</li><li>Manages platform rig engineering in the planning and execution of rig maintenance, rig modifications, recertification and upgrades.</li><li>Ensures peer reviews, risk assessments, engineering/planning reviews, etc. are undertaken.</li><li>Sets performance targets and implements performance measurement and improvement processes.</li><li>Ensures that the lessons learned system is utilized to record lessons and used to transfer lessons into detail well planning to complete the full learning cycle.</li></ul><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p><p><strong>Desired Candidate Profile</strong></p><p>Requires an undergraduate degree in STEM, preferably in Petroleum or Mechanical Engineering, and 12+ years experience as a Well Engineer with knowledge of drilling, completions, intervention operations and techniques. Demonstrated experience in leading or supervising an engineering team. Must have a Well Control certificate.</p><p>Preferred Experience: Minimum of 15-years relevant experience in their discipline or in an operations environment within the oil &amp; gas industry.</p>

<p><h4>Control room operator</h4> <p><strong>CEQO07 - Operator, Plant</strong></p> <p>Monitoring and operating control panels responsible for the operation of various equipment.</p> <p>Coordinating the appropriate responses to emergencies or power outages.</p> <p>Maintaining a detailed log of operations and reporting any abnormal occurrences.</p> <p>Conducting regular checks to ensure all equipment is in working order.</p> <p>Communicating with team members, supervisors, or emergency personnel as needed.</p> <p>Adhering to safety protocols and standards at all times.</p> <p>Implementing and monitoring the systems and switch sequences for equipment start-up and shutdown.</p> <p>Identifying potential issues and troubleshooting equipment or processes as needed.</p> <p>Performing routine maintenance and repairs on equipment when necessary.</p> <p>Ensuring that the control room remains clean and free from hazards.</p> <h4>Experience</h4> <p>5+ years in the same field.</p> <h4>Qualification</h4> <p>Degree holder with good communication in English.</p></p><p></p>