وظائف فني تعبئة و تغليف في العراق

<p>Managing the office side of project execution on a day-to-day basis: ensuring sites have the materials, machinery, and approvals they need before they are required, and converting drawings, specifications, and bill of quantities into actionable, approved information; measuring what has been completed, documenting, certifying, and uploading it in the interim statements so the company receives its full dues on time. This role is the liaison between sites, suppliers, and the client consultant, and conveys this liaison in English.</p><p><strong>&nbsp; Tasks and responsibilities &nbsp;</strong></p><p><strong>First: Office logistics and procurement support</strong></p><p>▪&nbsp;&nbsp;&nbsp; Consolidate material requests from all sites into a single organized purchase plan, in sequence of the project schedule, rather than processing each request separately.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical RFIs and RFQs, and obtain at least three quotes for each material or service of significant value.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare technical and financial comparison tables, verify each quote against specifications, and raise recommendations to management for award.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare internal purchase requests, follow up on issued purchase orders, fix delivery dates, and expedite any supplier that is delayed.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a material tracking log — what was requested, in transit, delivered, and still pending — and circulate weekly.</p><p>▪&nbsp;&nbsp;&nbsp; Identify long lead-time materials at the start of each project, and notify management in writing of any material threatening its planned delivery schedule.</p><p>▪&nbsp;&nbsp;&nbsp; Coordinate transport, hire machinery, and equipment movement between sites, and secure related permits.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of machinery and equipment: location, operating hours, fuel consumption, maintenance dates, and certificate validity.</p><p>▪&nbsp;&nbsp;&nbsp; Control minimum stock levels of consumables and monitor their distribution to sites against signed requests.</p><p><strong>Second: Delegation of works from the technical office</strong></p><p>▪&nbsp;&nbsp;&nbsp; Review drawings, specifications, and BOQs before work starts, raise RFI on any conflict to be resolved at the office, not on site.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare as-built (Shop Drawings) and As-Built drawings, reinforcement schedules, and cutting lists.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare and submit material submittals with their technical data, and maintain a log of their status and dates.</p><p>▪&nbsp;&nbsp;&nbsp; Issue the latest approved edition of each drawing to site, and withdraw obsolete editions from circulation.</p><p>▪&nbsp;&nbsp;&nbsp; Compile quantities from drawings and compare with the BOQ; define additional works before execution, not after.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare method statements, ITPs, and material approval requests.</p><p>▪&nbsp;&nbsp;&nbsp; Review daily and weekly site reports, update progress against the schedule, and raise variances with reasons.</p><p><strong>Third: Measurement, interim payments, and cost control</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare interim monthly progress certificates: measurement sheets, quantities, supporting documents, and a pictorial record, submitted on the contractual date.</p><p>▪&nbsp;&nbsp;&nbsp; Verify subcontractor interim payments against actual billed works, and certify only what is proven.</p><p>▪&nbsp;&nbsp;&nbsp; Prepare change orders and extension requests with supporting documents and cost analysis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a comparison of actual cost vs budget for each item in the BOM and escalate any overruns when they occur, not at project close.</p><p>▪&nbsp;&nbsp;&nbsp; Reconcile material consumption with theoretical quantities from drawings and report waste or loss.</p><p><strong>Fourth: Subcontractors and suppliers</strong></p><p>▪&nbsp;&nbsp;&nbsp; Prepare scopes of work for subcontractors and RFQ packages, and compare bids on a comparable basis.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain approved suppliers and subcontractors lists, with contact details, prices, and past performance records.</p><p>▪&nbsp;&nbsp;&nbsp; Monitor validity of subcontractor insurance and bonds, registrations, and work permits, and provide warnings before expiry.</p><p><strong>Fifth: Planning and reporting</strong></p><p>▪&nbsp;&nbsp;&nbsp; Maintain baseline schedule and update actual progress on agreed dates (MS Project or Primavera P6).</p><p>▪&nbsp;&nbsp;&nbsp; Prepare weekly and monthly progress reports, including the cumulative progress curve (S-Curve), labor and equipment curves, and pictorial log.</p><p>▪&nbsp;&nbsp;&nbsp; Maintain a log of action items arising from client, consultant, and internal meetings, and follow through to closure.</p><p>▪&nbsp;&nbsp;&nbsp; Contribute to preparing tender timelines, method of execution, and resource schedules accompanying bids.</p><p><strong>Sixth: Documentation and correspondences in English</strong></p><p>▪&nbsp;&nbsp;&nbsp; Draft technical correspondences, RFIs, approvals, transmittals, and progress reports in English with sound technical terminology.</p><p>▪&nbsp;&nbsp;&nbsp; Attend meetings with clients and consultants, present the technical position, and prepare meeting minutes.</p><p>▪&nbsp;&nbsp;&nbsp; Control project documentation: numbering, transmittal log, drawing register, and archiving all outgoing and incoming items in an organized manner.</p><p>▪&nbsp;&nbsp;&nbsp; Note: Company clients are international entities and organizations, and their contracts, specifications, and correspondences are in English only; thus English writing proficiency is a mandatory requirement for this role, not an added bonus.</p><p><strong>&nbsp; Qualifications and experience &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Bachelor’s degree in Civil Engineering (preferred), or Electrical or Mechanical Engineering, from a recognized university.</p><p>▪&nbsp;&nbsp;&nbsp; Valid membership in the Engineers Syndicate or equivalent in the work country.</p><p>▪&nbsp;&nbsp;&nbsp; Four (4) years of experience or more with a contracting company in the technical office or in project execution; design office experience alone is not a substitute.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in English speaking and writing — mandatory. Arabic is the daily language for site coordination.</p><p>▪&nbsp;&nbsp;&nbsp; Proficiency in AutoCAD, advanced Excel, Word, and MS Project or Primavera P6; familiarity with Revit and BIM systems is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to quantify accurately and read civil, structural, and MEP drawings and specifications.</p><p>▪&nbsp;&nbsp;&nbsp; Practical knowledge of FIDIC contracts and the structure of BOQs and certifying interim payments is a plus.</p><p>▪&nbsp;&nbsp;&nbsp; Valid driving license and willingness to travel to sites.</p><p><strong>&nbsp; Personal skills and competencies &nbsp;</strong></p><p>▪&nbsp;&nbsp;&nbsp; Numerical accuracy — this role deals with quantities that translate into money, and any miscalculation will cost later.</p><p>▪&nbsp;&nbsp;&nbsp; Organizational ability to manage multiple projects concurrently without neglecting any.</p><p>▪&nbsp;&nbsp;&nbsp; Proactive rather than reactive: procurement and submission ahead of need, not after work stops due to shortage.</p><p>▪&nbsp;&nbsp;&nbsp; Clear and proper English writing, enabling communication with the consultant without rephrasing the letter.</p><p>▪&nbsp;&nbsp;&nbsp; Discretion in dealing with prices, costs, profit margins, and supplier terms.</p><p>▪&nbsp;&nbsp;&nbsp; Ability to stand firm on a technical position under client or consultant pressure, and escalate to management instead of yielding.</p><p><strong>&nbsp;</strong></p>

<p>In this role, you ll work with department managers and supervisors to deliver the program s preventative medicine plan. Your responsibilities will span food service, water purification, potable water, and ice plant operations, combining inspections and records review with disease prevention and environmental health activities.</p><h3>Position Title: Preventative Medicine Specialist or Technician</h3><p>Assignment Location: Onsite in Balad, Iraq; relocation required.</p><p>Work Environment: Work is normally performed in a deployed work environment.</p><h3>Key Responsibilities</h3><ul><li>Provide food and water safety support and subject matter expertise for the dining facility, retail concession restaurants and stores, reverse osmosis water purification unit, potable water operations, and ice plant operations.</li><li>Evaluate sanitation practices and preventative hygiene measures for dining facility customers and workers.</li><li>Inspect storage areas and food packaging, and inspect or review food and water deliveries.</li><li>Review water test results and collaborate on activities to prevent foodborne and waterborne illnesses. The prime contractor is responsible for testing water samples.</li><li>Work with the prime contractor, as needed, on disease surveillance, vector control, waste management, environmental health concerns, and infectious disease outbreak identification and mitigation.</li><li>Support preventative medicine inspection schedules and review department records supporting program-referenced medical technical bulletin requirements and the prevention of foodborne and waterborne illnesses.</li><li>Complete required organizational and client-specified compliance education associated with Joint Commission Healthcare Staffing Services certification or other regulatory bodies.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two years of experience in preventative medicine, including food and water safety practices.</p><p>Education or training equivalent to Preventative Specialist, Military Occupational Specialty (MOS) 68S, or an international equivalent.</p><p>Fluency in both spoken and written English.</p><h3>Assignment and Physical Requirements</h3><ul><li>Obtain medical clearance and maintain current immunizations.</li><li>Possess a valid passport from your country of record before relocation and maintain a current passport throughout your stay in Balad.</li><li>Be able to sit and stand for prolonged periods.</li><li>Work may also require bending, stooping, and lifting up to 15 pounds.</li></ul>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The Mechanical & Hydraulic Technician (GSE) is responsible for carrying out preventive, corrective, and emergency maintenance on all Ground Support Equipment used in airport operations. This includes diesel engines, transmissions, hydraulic pumps, cylinders, hoses, valves, braking systems, chassis components, and all mechanical/hydraulic assemblies. The role ensures that GSE units remain safe, reliable, and operational to support continuous aircraft ground handling. Performs preventive and corrective maintenance on mechanical and hydraulic systems for all GSE, including: • Pushback tractors • Belt loaders • Baggage tractors • High-lift catering trucks • Lavatory/water service trucks • Ground Power Units (GPU – mechanical side) • Air Start Units (ASU – mechanical/hydraulic side) • Passenger stairs • All hydraulic-driven and mechanical-driven GSE Mechanical Maintenance Tasks • Engine repair and overhaul (diesel & gasoline) • Transmission repair (manual/automatic) • Cooling system service (radiators, hoses, thermostats) • Brake system service (air, hydraulic, mechanical) • Suspension & steering system repairs • Lubrication, oil/filter changes, belt replacement • Structural inspections (welding cracks, chassis damage) Hydraulic Maintenance Tasks • Hydraulic pump repair and replacement • Hydraulic cylinder rebuilding (seals, rods, pistons) • Valve block service and troubleshooting • Hose replacement, fitting installation, and leak rectification • System pressure testing and flow measurement • Hydraulic fluid flushing, bleeding, and contamination control Diagnostics & Technical Reporting • Uses mechanical and hydraulic diagnostic equipment • Identifies mechanical/hydraulic faults and root causes • Reads and interprets service manuals, diagrams, hydraulic schematics • Completes work orders, checklists, and maintenance reports accurately</p><p>A hands-on technician with 2-4 years of experience in heavy equipment, GSE, or hydraulic systems, capable of independently diagnosing and repairing mechanical and hydraulic faults, performing preventive maintenance, reading technical manuals, and ensuring GSE equipment remains safe, reliable, and operational in an airport environment. Education: Diploma in Mechanical Engineering Technology, Automotive Maintenance, or Hydraulic Systems. Experience: 2–4 years of experience in GSE, heavy vehicles, industrial machinery, or hydraulic systems, Strong understanding of engine, hydraulic, and mechanical systems, Airport GSE experience is desirable. Training Requirements: Mechanical & Hydraulic Systems Maintenance, Diesel Engine Repair Training, Hydraulic Troubleshooting. Computer Skills: MS office Language Skills (Eng., Arabic, other): Arabic and English Behavioral Competencies • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • Hydraulic and Mechanical Systems • Technical Reporting and Documentation</p>

<p>The GSE Electrician Technician is responsible for performing electrical preventive, corrective, and emergency maintenance on all Ground Support Equipment across the airport. This includes 12V/24V/48V DC systems, AC electrical systems, control panels, sensors, alternators, starters, wiring harnesses, ECUs, and electrical components related to diesel/electric GSE. The role ensures the electrical systems of all GSE units are reliable, safe, and operational to support continuous airport operations. o Performs electrical maintenance and repair of all GSE electrical systems, including: o GPUs (400Hz/28V DC) electrical circuits o ASU electrical systems o Pushback tractors electrical/electronic components o Belt loaders, baggage tractors, and high-lift trucks o Lavatory/water trucks electrical systems o Battery-operated GSE o Troubleshoots electrical faults related to: o Fuses, relays, connectors o Alternators, starters, batteries o Controllers, ECUs, sensors o Switches, actuators, solenoids o Diagnoses electronic and CAN-BUS communication issues (if applicable). o Performs battery maintenance, load testing, and replacement. o Reads and interprets electrical diagrams, wiring schematics, and service manuals. o Uses multimeters, clamp meters, diagnostic scanners, and test equipment effectively. o Assists in overhauls, rebuilds, and electrical refurbishment of older GSE units. o Ensures electrical components are installed correctly and safely. o Supports installation of lighting, safety beacons, alarms, and electrical accessories on GSE. o Completes service reports, checklists, and work orders accurately. o Ensures electrical systems comply with OEM standards and airport safety rules.</p><p>A skilled Electrical Technician with 2-3 years of experience in GSE, heavy vehicles, or industrial equipment maintenance, possessing strong expertise in electrical troubleshooting, batteries, charging systems, wiring, and electronic controls. The candidate should be capable of independently diagnosing and repairing faults while ensuring equipment availability, operational reliability, and compliance with airport safety standards. Education: Diploma in Electrical Engineering Technology or Automotive Electrical Systems. Experience: Minimum 2–3 years of experience in electrical maintenance on GSE, heavy vehicles, or industrial equipment. Strong knowledge of DC/AC automotive electrical systems. Experience in fault finding, wiring, and control systems. Training Requirements: GSE Electrical Systems Training (OEM preferred) , Battery Maintenance & High-Amperage Safety, Airside Driving & Safety (recommended) Computer Skills: MS office Language Skills: Arabic and English Behavioral Competencies: • Delivering Results & Fostering Ownership • Building Customer Value • Networking & Influencing Collaboratively • Leading Teams • Driving Change Technical Competencies • Diagnostic & Troubleshooting Techniques • Preventive & Corrective Maintenance • GSE Maintenance • GSE Electrical Systems • Technical Reporting and Documentation</p>

<p>O &amp; M technician for daily job orders and team follow-up Daily task O&amp;M follow-up Network performances and KPI with outage follow-up Project implementations participations Daily reporting.</p><p>Technical knowledge (Power, Generators and cooling) maintenances and repair Preventive and correction process</p><p>Behavioral Competencies: Delivering Results &amp; Fostering Ownership. Building Customer Value.</p><p>Technical Competencies: Access Network Operations Network Monitoring Passive Network Operations Problem Solving Technical Writing and Reporting</p><p><strong>Desired Candidate Profile</strong></p><p>Mechanical /Electrical perp industry / technology institute 5-year experiences in field</p>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Technician (Electrical) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be responsible for <strong>electrical pre-commissioning, testing, inspection, rectification, and documentation</strong> under approved procedures and Engineer supervision. Ensure electrical systems supporting instrumentation and ICSS are safely tested and ready for energization and handover.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform assigned <strong>electrical pre-commissioning and commissioning tests</strong> under Engineer supervision.</li><li>Conduct <strong>continuity, insulation resistance (IR), earth/grounding, polarity, and functional tests</strong>.</li><li>Inspect and verify <strong>cables, terminations, glands, panels, connections, and labeling</strong>.</li><li>Perform checks on <strong>UPS, battery systems, control power supplies, and distribution panels</strong>.</li><li>Support testing of electrical power supplies serving <strong>Instrumentation, ICSS, DCS, SIS, PLC, and F&amp;G systems</strong>.</li><li>Identify and rectify approved <strong>electrical defects and punch-list items</strong>.</li><li>Support <strong>LOTO, isolation, de-energization, energization, and safe reinstatement</strong> activities.</li><li>Maintain <strong>test equipment, meters, tools, cables, and commissioning consumables</strong>.</li><li>Complete <strong>test sheets, checklists, punch records, inspection records, and commissioning documentation</strong>.</li><li>Report failed tests, defects, abnormal conditions, and unresolved issues to the <strong>Commissioning Engineer</strong>.</li><li>Coordinate with <strong>Electrical, Instrumentation, ICSS, Operations, Construction, HSE, and vendors</strong>.</li><li>Comply with <strong>PTW, LOTO, electrical safety, HSE, quality, and Company requirements</strong>.</li></ul> </div>

<h2 class="h5">Job description</h2> <div class="t-break" data-jb-field="description"> <p>INTECH Process Automation is seeking a Seasoned<strong> Commissioning Technician (Instrument) </strong>to join our Operations &amp; Maintenance (O&amp;M) team. The selected candidate will be Responsible for <strong>instrument pre-commissioning, commissioning, calibration, loop checking, functional testing, and punch-list rectification</strong> in accordance with approved procedures. Ensure accurate test results, proper defect reporting, and safe system readiness for handover.</p><br><p><strong>Key Responsibilities:</strong></p><br><ul><li>Perform <strong>instrument pre-commissioning and commissioning</strong> activities in accordance with approved procedures.</li><li>Conduct <strong>calibration, continuity checks, loop checks, and signal verification</strong>.</li><li>Configure and test <strong>field instruments, smart devices, and instrument interfaces</strong>.</li><li>Perform <strong>functional, Cause &amp; Effect, alarm, interlock, and shutdown tests</strong> under Engineer supervision.</li><li>Verify instrument signals and functionality through <strong>DCS, SIS/ESD, F&amp;G, PLC, and ICSS interfaces</strong>.</li><li>Identify, troubleshoot, and rectify <strong>commissioning defects and punch-list items</strong>.</li><li>Support <strong>energization, isolation, reinstatement, startup, and controlled return to service</strong>.</li><li>Maintain and verify <strong>test equipment, calibration standards, tools, and commissioning consumables</strong>.</li><li>Complete <strong>test sheets, calibration records, checklists, punch lists, and commissioning documentation</strong>.</li><li>Report abnormal conditions, failed tests, defects, and unresolved issues to the <strong>Commissioning Engineer</strong>.</li><li>Coordinate with <strong>Operations, Instrumentation, ICSS, Electrical, Mechanical, Construction, HSE, and vendors</strong>.</li><li>Comply with <strong>PTW, LOTO, HSE, process safety, quality, and commissioning requirements</strong>.</li></ul> </div>

<p>The Instrumentation &amp; Controls Technician disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience</p><p>Must have appropriate license or certification where required by federal, state or local laws</p><p>English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Introductory level.</li><li>Possess good attitude, skills, and ambition</li><li>Basic skills training to ensure knowledge of fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><h3>Key Responsibilities</h3><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Requirements Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent. At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year. Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent. Current ARRT CT certification/registration, or applicable country-of-record equivalent. Current BLS certification or approved equivalent. Proficiency with electronic medical records and Microsoft Office applications. Ability to read, write, and speak English effectively. Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project. Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</p><p>Preferred Prior experience supporting military, government, or international healthcare environments. Current applicable security clearance.</p>

<p>As a CT/X-ray Radiographer (Radiologic Technician), also known as a Radiologic Technologist, you'll perform diagnostic X-ray and computed tomography examinations within an international healthcare environment in Baghdad, Iraq. You'll prepare and position patients, operate imaging equipment, maintain accurate clinical records, and apply radiation protection and infection-control practices throughout each examination.</p><p>Assignment Location: This position is based onsite in Baghdad, Iraq.</p><p>Key Responsibilities</p><ul><li>Perform ordered diagnostic X-ray and CT examinations.</li><li>Prepare and position patients, adjust immobilization devices, and configure imaging equipment and exposure controls.</li><li>Explain imaging procedures, answer patient questions, and document services in patient and departmental records.</li><li>Apply radiation protection techniques, including beam restriction, patient shielding, and appropriate exposure-factor selection.</li><li>Follow infection-control, workplace safety, contrast-reaction, first-aid, and emergency response protocols.</li><li>Participate in required mass-casualty exercises and organizational compliance education.</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Completion of an approved radiologic technology program leading to a diploma, certificate, or associate degree; qualifying U.S. military radiology technical-school training; or applicable country-of-record equivalent.</li><li>At least three years of recent experience as a Radiologic Technologist, including at least six months within the past year.</li><li>Current unrestricted professional license and ARRT certification, or applicable country-of-record equivalent.</li><li>Current ARRT CT certification/registration, or applicable country-of-record equivalent.</li><li>Current BLS certification or approved equivalent.</li><li>Proficiency with electronic medical records and Microsoft Office applications.</li><li>Ability to read, write, and speak English effectively.</li><li>Valid passport from your country of record with at least 18 months remaining before expiration; ability to maintain a current passport while in Iraq; ability to obtain and maintain the required security clearance; and ability to relocate to Iraq for the duration of the project.</li><li>Ability to meet pre-assignment physical requirements and perform work involving prolonged sitting and standing, bending, stooping, and lifting up to 25 pounds.</li></ul><p>Preferred</p><ul><li>Prior experience supporting military, government, or international healthcare environments.</li><li>Current applicable security clearance.</li></ul>

<p>The Instrumentation &amp; Controls Technician, having completed level two competencies, disassembles, inspects, cleans, repairs, calibrates, tests, and performs periodic maintenance of field instruments, equipment systems and controls. Evaluates and determines necessary modification, performs complex repairs or removal of instruments or devices needing overhaul during scheduled maintenance, troubleshooting while performing unscheduled work.</p><p><strong>Essential Duties &amp; Responsibilities:</strong></p><ul><li>Record and report abnormal function or out of tolerance conditions of equipment and initiate corrective action and documentation</li><li>Provide documents daily record of inspection, maintenance activity, repair and other work performed within approved guidelines and procedures.</li><li>Reinstall, test, evaluate, calibrate, and maintain instruments or devices upon completion of repairs.</li><li>Communicate with customer staff in the calibration, repair and operation of equipment as necessary.</li><li>Perform work in accordance with approved equipment, calibration, maintenance and safety procedures.</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li><li>Travel extensively (internationally and domestically)</li><li>May be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Two-year degree, scientific field of study preferred or equivalent related work experience. Basic English language skills are required. 1-3 years of experience in instrumentation, controls, installing, calibrating, maintaining and repairing equipment or equivalent experience. Must have appropriate license or certification where required by federal, state or local laws English proficiency required</p><p><strong>Desired Characteristics:</strong></p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Demonstrated use and understanding of physical standards of mass, temperature flow and pressure.</li><li>Working knowledge of computers.</li><li>Ability to read and work from blueprints, schematic diagrams and specification manuals.</li><li>Team player committed to working in a quality environment</li><li>Working knowledge of computers/PLC's</li><li>Excellent customer, communication, and interpersonal skills</li><li>Ability to work independently</li><li>Ability to complete multiple projects within time constraints</li><li>Strong organizational skills</li></ul>

<p>The primary responsibility of the Mechanic Steam and Gas - is to safely accomplish the installation, maintenance and repair of the heavy rotating machinery used mainly in power generation applications. Turbine Mechanics work closely with Supervisors, EHS personnel, and the Operations Department to achieve these goals. You may be assigned other duties to help proactively drive our FieldCore vision and align with our organization s core values.</p><p>Essential Duties &amp; Responsibilities:</p><ul><li>Read blueprints, schematic drawings and technical documentation to determine proper work procedures.</li><li>Install machinery and equipment according to layout plans, blueprints and other drawings in industrial establishments.</li><li>Dismantle and assemble machinery and equipment using a variety of hand, power, pneumatic and hydraulic tools.</li><li>Perform mechanical and electrical maintenance and repairs on power tools, hand tools and training equipment.</li><li>Move machinery and equipment using hoists, cranes, chain falls and trucks.</li><li>Align machinery and equipment using hoists, squares, rules, micrometers, plumb bobs, dial indicators and/or laser alignment equipment.</li><li>Perform machining and welding operations for making various parts for lab and shop training equipment</li><li>Perform material and machine inspections using precision measuring equipment such as micrometers, rules, calipers, protractors, and torque wrenches.</li><li>Responsible for shipping and receiving all major pieces for T&amp;DC, plus all shipping, receiving, inventory, and control of tools, equipment and supplies</li><li>Determine equipment specifications and prepare parts lists for purchasing, consisting of mechanical, electrical, and hydraulic devices as needed to complete assigned projects.</li><li>Load, transport, and unload materials, tools, equipment and supplies.</li><li>Availability to travel and be away from home for extended periods of time</li><li>Ability and willingness to work holidays, weekends and overtime as required by field assignments</li></ul><p><strong>Desired Candidate Profile</strong></p><ul><li>Degree or associate degree in Technical Field, Gas Turbine Systems Technician preferred</li><li>Must have a minimum of two (2) years experience maintaining, dismantling, and installing machinery and industrial service equipment including various pumps, motors, fans, generators, and turbines.</li><li>Must have experience performing equipment alignments using either laser or traditional methods.</li><li>Must have Driver s License</li><li>Must possess minimum required hand tools.</li></ul><p>Desired Characteristics:</p><ul><li>Qualified level. Able to successfully perform all requirements of the job properly.</li><li>Possess advanced skills and applies the fundamental concepts, practices and procedures of a particular field of specialization.</li><li>Has solid skills acquired with trainings and required to disassemble and reassemble complex rotating equipment</li><li>Bolting, Hydraulic Bolting, Flange Management, Small Bore Piping, Basic Rigging/Lifting, O/H Crane Operator</li><li>Good mechanical/technical skills.</li><li>Good oral communication skills and critical thinking ability.</li><li>May be required to handle time-sensitive tasks and maintain a schedule within operationally challenging environments.</li><li>Must work well both independently and in a team environment.</li></ul>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Job description</h4> <p>The computer systems analyst I provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>This analyst provides several phases of the required systems analysis where the nature of the system is predetermined, uses established fact-finding approaches, knowledge of pertinent work processes and procedures, and familiarity with related computer programming practices, system software, and computer equipment.</p> <p>Carries out fact finding and analyses as assigned, usually of a single activity or a routine problem, and applies established procedures where the nature of the system, feasibility, computer equipment, and programming language have already been decided.</p> <p>May assist a higher-level systems analyst by preparing the detailed specifications required by computer programmers from information developed by the higher-level analyst.</p> <p>May research routine user problems and solve them by modifying the existing system when the solutions follow clear precedents.</p> <p>Prepare cost and deadline estimates as required for review.</p> <p>Works independently to adapt guides to specific situations; resolve problems and deviations according to established practices; and obtain advice where precedents are unclear or not available.</p> <p>Carries out objectives, priorities, and deadlines as defined by the supervisor.</p> <p>May supervise technician and others who assist in specific assignments.</p> <p>Will have some variation within and across contracts and may list additional or specific job duties related to assigned function/level which are not aforementioned.</p> <h4>Minimum requirements</h4> <p>High school diploma or equivalent is required. Certification of education level is required.</p> <p>CompTIA Security+ certification.</p> <p>Must possess two (2) years of related experience in computer systems analysis.</p> <p>Ability to obtain and maintain a US government SECRET clearance is required (prefer active Secret clearance). US citizenship is required for SECRET clearance at this work location.</p> <p>A valid U.S. passport is required to travel internationally. Passport must have a minimum of 6 blank pages and 2 plus year validity on expiration date of passport.</p> <p>Must be able to pass CENTCOM medical requirements for deployment.</p> <p>Must be able to obtain a visa in CENTCOM locations.</p> <h4>Knowledge & skills</h4> <ul> <li>Requires competence in most phases of system analysis.</li> <li>Systems analysis and design skills in an area such as a record keeping or scientific operation.</li> <li>Knowledge of pertinent system software and computer equipment.</li> <li>Knowledge of work processes, applicable regulations, and practices of the assigned subject-matter area.</li> <li>Ability to recognize probable interactions of related computer systems and predict impact of a change in assigned system.</li> <li>Good problem-solving skills.</li> <li>Self-motivated and the ability to work independently.</li> </ul> <h4>Physical requirements/working environment</h4> <ul> <li>Must be able to walk and stand on level and/or inclined surfaces for extended periods throughout the day.</li> <li>Must be able to lift/push/pull minimum of 50 pounds.</li> <li>May work in maintenance shop or outside.</li> <li>Must be able to work in a shop where the environment is drafty, noisy, and dirty.</li> <li>May be exposed to extreme noise from operating equipment.</li> <li>May be exposed to electrical shock hazards or work near moving mechanical parts or vehicles.</li> <li>May be expected to work in austere environments and all weather conditions.</li> </ul></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>The avionics technician performs aircraft maintenance to include inspection, operational test, repair, modification and replacement of aircraft electrical/avionics systems and components. Applies technical knowledge and skills to troubleshoot electrical/avionics discrepancies.</p> <ul> <li>Possess in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a high degree of expertise of aircraft electrical/avionics systems.</li> <li>Performs the inspection, testing, troubleshooting, repair, modification and rewiring as required of complex avionics/electrical systems and subsystems discrepancies and modifications.</li> <li>Use schematic diagrams, blueprint drawings, maintenance manuals and factory publications to operate, modify, test and repair aircraft electrical/avionics systems.</li> <li>Utilize test equipment to include but not limited to digital volt/amp meter, transponder ramp tester, fuel quantity tester, ITT calibration test set, and other test equipment required in the troubleshooting, modification, and repair of avionics/electrical systems.</li> <li>Order parts and materials.</li> <li>Obtain and maintain qualification as a plane captain and any associated licenses/qualifications necessary to perform the duties of an OMAT2.</li> <li>Operate ground support equipment.</li> <li>Identify and treat avionics/electrical corrosion.</li> <li>Perform aircraft jacking and hoisting as required.</li> <li>Perform certification and re-certification of altimeter systems.</li> <li>Perform calibration of directional guidance systems.</li> <li>Required to perform collateral duty inspections.</li> <li>Must obtain and keep current turn qualification.</li> <li>Maintain cleanliness of the work center.</li> <li>Comply with foreign object damage (FOD), egress familiarization, and hazardous waste and tool control programs.</li> <li>Comply with all established general and industrial safety rules and regulations as applicable to the contract, facility, and job assignment.</li> <li>Assist as directed to ensure safety, security and preservation of government/company owned equipment.</li> <li>Present a courteous and professional demeanor when dealing with customers.</li> <li>Furnish and maintain own hand tools.</li> <li>Operate portable firefighting equipment.</li> <li>Operate aircraft ground servicing equipment including vehicles, tugs, tractors, servicing carts, aircraft jacks and hoists, test equipment, hand tools, power tools.</li> <li>Perform all other position related duties as assigned or requested.</li> </ul> <h4>Minimum qualifications:</h4> <ul> <li>Satisfactory completion of U.S. Armed Forces aircraft avionics school or other schools with equivalent curriculum or three (3) years of on-the-job training and/or experience working with similar avionics systems and components is required.</li> <li>Graduation from high school or GED required.</li> <li>Must be able to meet any government/company licensing/qualification requirements for the position.</li> <li>Must have an FAA Airframe and Powerplant (A&P) license.</li> <li>Must have three (3) years’ experience in T6 aircraft electrical/avionics maintenance including avionics corrosion detection, treatment and prevention, performing maintenance on avionics and/or electrical systems, utilizing tools, blueprints, drawings, wiring diagrams, schematics and normal safety requirements.</li> <li>Demonstrate a basic knowledge of aircraft systems and nomenclature.</li> <li>Possess working knowledge and skill in the use of basic tools and test equipment.</li> <li>Must be familiar with the operational capabilities and limitations of electrical/avionics systems.</li> <li>Possess a working knowledge of the detection, prevention, and treatment of corrosion.</li> <li>Must be able to read, write, understand, and communicate the English language and follow verbal and written instruction.</li> <li>Must obtain and keep current turn qualification.</li> </ul></p><p></p>