وظائف فني صيانة - بغداد العراق

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat-mounted intelligence, surveillance, and reconnaissance (ISR) platform, its mobile mooring platform (MMP), sensor payload(s), communications and navigation systems, as well as associated support equipment (boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidates will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience: <ul> <li><strong>Electrical maintenance mechanic:</strong> Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent. Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required. Must be qualified at the 10 series or greater level (via military or civilian technical schools). Ability to read electronic schematics. O&M of electro-mechanical equipment to include one or more of the following: hydraulic/servo valves, hydraulic actuators, control systems, test and diagnostic equipment.</li> <li><strong>Networking, IT & information systems:</strong> Two years’ experience is required. Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or CompTIA certification) will be considered. CCIE certification with fiber optic certification is preferred.</li> <li><strong>Mechanical maintenance:</strong> Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) Certified Truck Mechanic or Federal Aviation Administration (FAA) General Mechanic 1 or greater. Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required. O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes, aerial lift, forklift, industrial generator sets.</li> </ul> </li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environments. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payload(s), communications and navigation systems as well as associated support equipment (boom lift, forklift, all terrain vehicles (ATVs), and electrical power generators).</p> <p>Candidate will perform user-level maintenance functions including performing hands-on preventative maintenance checks and services (PMCS), troubleshooting, removing and replacing line replaceable units (LRUs), and removing and replacing payloads.</p> <p>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active secret US government clearance. Note: US citizenship is required to obtain a secret clearance.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> <li>At least one (1) year previous aerostat experience OR two (2) years of experience in the following areas may be substituted in lieu of aerostat experience:</li> </ul> <h4>1) Electrical maintenance mechanic</h4> <ul> <li>Possess at least two (2) years aerostat experience as an operator at the 20 series level or greater from Army MOS 35F (Intelligence Analyst), 35G (Geospatial Intelligence Imagery Analyst), 35H (Common Ground System Analyst), 96R (Ground Surveillance Systems Operator), 96U (Unmanned Aerial Vehicle Operator), or military branch equivalent.</li> <li>Two years of hands-on experience in performing operations and maintenance tasks either on an aerostat system or a related industry/military equivalent is required.</li> <li>Must be qualified at the 10 series or greater level (via military or civilian technical schools) is required.</li> <li>Ability to read electronic schematics.</li> <li>O&M of electro-mechanical equipment to include one or more of the following: <ul> <li>Hydraulic/servo valves</li> <li>Hydraulic actuators, control systems</li> <li>Test and diagnostic equipment</li> </ul> </li> </ul> <h4>2) Networking, IT & information systems</h4> <ul> <li>Two years’ experience is required.</li> <li>Must be qualified at the 10 series or greater level; MOS 25B/F or other military branch equivalent or industry occupational specialties as a CISCO network administrator; Army MOS 25L/N or other military branch equivalent or industry occupational specialties as a network installation (BICSI or Network+ or Comp T certification) will be considered.</li> <li>CCIE certification with fiber optic certification is preferred.</li> </ul> <h4>3) Mechanical maintenance</h4> <ul> <li>Mechanical maintenance with qualifications at the 10 series or greater from U.S. Army MOS 94D/X and 91/B/S/W or other military branch equivalent, or industry occupational specialties such as National Institute for Automotive Service Excellence (ASE) certified truck mechanic or Federal Aviation Administration (FAA) general mechanic 1 or greater.</li> <li>Two years of hands-on experience on an aerostat system or a related industry/military equivalent is required.</li> <li>O&M of mechanical equipment to include one or more of the following: hydraulic systems, winch systems, tether/cable handling systems, industrial generator sets, power switch gear, HVAC, cranes aerial lift, forklift, industrial generator sets.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop, squat repetitive during shift.</li> <li>Requires the ability to regularly kneel repetitive for shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis for shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis for shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<p><h4>Company description</h4> <p>HVAC supervisor</p> <p>We are far more than a worldwide leader. We welcome you as you are and you can find a job and brand that matches your personality. We support you to grow and learn every day, making sure that work brings purpose to your life, so that during your journey with us, you can continue to explore Accor’s limitless possibilities.</p> <p>By joining an Accor brand, every chapter of your story is yours to write and together we can imagine tomorrow's hospitality.</p> <p>Do what you love; care for the world; dare to challenge the status quo! #BELIMITLESS</p> <h4>What is in it for you?</h4> <ul> <li>Employee benefit card offering discounted rates in Accor worldwide</li> <li>Learning programs through our Academies and the opportunity to earn qualifications while you work</li> <li>Opportunity to develop your talent and grow within your property and across the world</li> <li>Ability to make a difference in the local community through our Corporate Social Responsibility activities</li> </ul> <h4>Job description</h4> <p>The HVAC supervisor is responsible for overseeing the operation, maintenance, and repair of all heating, ventilation, and air conditioning systems in the hotel. This role ensures optimal climate control for guest comfort, supervises the HVAC team, coordinates with other departments, and ensures all work complies with safety standards and hotel quality requirements.</p> <ul> <li>Lead and manage the HVAC team, assigning tasks, monitoring performance, and providing technical guidance.</li> <li>Conduct training for team members on maintenance procedures, safety practices, and new technologies.</li> <li>Prepare work schedules and ensure adequate manpower for continuous HVAC operations.</li> <li>Oversee inspection, preventive maintenance, troubleshooting, and repair of all HVAC equipment including chillers, air handling units, boilers, cooling towers, and fan coil units.</li> <li>Ensure HVAC systems operate efficiently and maintain optimal indoor air quality and temperature.</li> <li>Supervise installation, upgrades, and replacement projects of HVAC systems.</li> <li>Review technical drawings, equipment specifications, and ensure work complies with design requirements.</li> <li>Estimate materials, labour, and time required for projects and ensure timely completion.</li> <li>Report any hazards, accidents, or incidents to management immediately.</li> </ul> <h4>Qualifications</h4> <ul> <li>Strong knowledge of HVAC systems, controls, and preventive maintenance techniques.</li> <li>Leadership, team management, and problem-solving skills.</li> <li>Ability to read HVAC schematics, technical manuals, and drawings.</li> <li>Attention to detail and time management skills.</li> </ul> <h4>Additional information</h4> <p>Our commitment to diversity & inclusion:</p> <p>We are an inclusive company and our ambition is to attract, recruit and promote diverse talent.</p></p><p></p>

<p><h4>Job description</h4> <p>This position is contingent upon customer approval, funding, and/or position availability.</p> <p>The electrical supervisor will be based at one of three Amentum sites in Iraq and serve the operations and maintenance support services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for taking ownership of all facility electric and related projects to include maintenance, troubleshooting, repair, installation, and related O&M electrical projects. This position will report to the assistant O&M manager or designee. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.</p> <h4>Duties:</h4> <ul> <li>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</li> <li>Comply with all environmental health & safety and quality assurance requirements and goals.</li> <li>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</li> <li>Perform work required for the repair, maintenance, installation and modernization of electrical systems for site building's equipment.</li> <li>Locate and determine electrical malfunctions using test equipment.</li> <li>Repair malfunctions by such methods as replacing burned out elements, fuses, and replacing defective wiring, cleaning, repairing, or replacing motors.</li> <li>Test electrical equipment such as motors, heaters and controls for safety and efficiency, using standard test equipment and by observing functions.</li> <li>Install fixtures, wiring conduits, motors, and other electrical equipment.</li> <li>Inspect circuits for specified shielding and grounding.</li> <li>Report any malfunctions or lack of compliance with statement of work (SOW) to the assistant O&M manager.</li> <li>Perform inspections and prepare written reports.</li> <li>Maintain effective, timely, and respectful communication and interaction with other employees and manager and support other organizations.</li> <li>Perform other administrative tasks when directed, including material ordering, inventory, work scheduling and report preparation.</li> <li>Responsible for facility custodianship of work area and management of tools, equipment and spare parts for the electrical operation.</li> <li>Take initiative to analyze a situation and to make frequent technical decisions based on specifications, safety and electrical codes.</li> <li>Perform additional duties and projects as assigned.</li> </ul> <h4>Required:</h4> <p><strong>Minimum acceptable experience level:</strong></p> <ul> <li>Two (2) years’ experience as a master electrician, ten (10) years’ experience as a journeyman electrician, or meet any state licensing board requirements for a master electrician license.</li> <li>Five (5) years’ electrical experience in operations and maintenance services.</li> <li>Three (3) years’ experience in an outside the continental United States (OCONUS) environment.</li> <li>Experience working with SOW, electrical diagrams, and blueprints.</li> <li>Current master electrician license (must hold prior to hire date or able to obtain a master electrician license within 180 days employment).</li> <li>Previous supervisory experience.</li> </ul> <p><strong>Knowledge, skills, and abilities:</strong></p> <ul> <li>Knowledge of applicable US codes and acceptable trade practices.</li> <li>Previous electrical experience in an OCONUS environment with a multi-national workforce is desirable.</li> <li>Knowledge and experience regarding occupational hazards of the electrical trade, related safety precautions and considerable skill required for the installation, maintenance and repair of electrical systems and equipment.</li> <li>Must have good organizational and communication skills with the ability to exercise sound judgment and make independent decisions.</li> <li>Knowledge of principles and processes involved in supporting contract responsibilities at an overseas facility.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong></p> <ul> <li>A high school diploma or GED.</li> <li>Electrician vocational diploma or successfully completed an apprentice program with a journeyman license or equivalent experience.</li> </ul> <p><strong>Passport, licenses and certifications:</strong></p> <ul> <li>As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining to expiration date with 8 blank pages.</li> <li>Valid drivers’ license.</li> <li>Current master electrician license (must hold prior to hire date or able to obtain a master electrician license within 180 days employment).</li> </ul> <p><strong>Security vetting:</strong> Already possess a US Government issued security clearance or be able to obtain a favorable US Government clearance prior to being hired is required for the position. Must maintain eligibility at the required certification or clearance level for the duration of the contract.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired:</h4> <ul> <li>Knowledge in the discipline of operations and maintenance projects in an international environment.</li> <li>Previous work experience in harsh environmental conditions is a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors. This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p><h4>Essential responsibilities:</h4> <p>Aerostat operators/user-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities.</p> <p>Candidates will perform all functions to operate the Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS), an aerostat mounted Intelligence, Surveillance, and Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), sensor payloads, communications and navigation systems, as well as associated support equipment including boom lift, forklift, all-terrain vehicles (ATVs), and electrical power generators.</p> <p>Additional responsibilities include performing analyses of system operations. Candidates must have:</p> <ul> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <p>Candidates will perform user-level maintenance functions including performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads.</p> <p>Candidates must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under the direction of higher classified technicians and/or site personnel.</p> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or equivalent is required.</li> <li>Two-year associate’s degree in a technical field from an accredited college can substitute for work experience.</li> <li>Must have an active Secret US Government clearance. US citizenship is required to obtain a Secret clearance.</li> <li>At least one year previous aerostat experience.</li> <li>Certified and school trained on 34M and 74K.</li> <li>Must have a valid U.S. passport with a minimum of one year remaining.</li> <li>Must have a valid US driver’s license.</li> <li>Knowledge of and experience in the operations of hardware systems and components.</li> <li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li> <li>Ability to perform routine system maintenance and analysis functions including hardware configurations; adding, removing, and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li> </ul> <h4>Physical requirements:</h4> <ul> <li>Requires the ability to regularly lift up to 50 lbs.</li> <li>Requires the ability to regularly climb extension ladders, roof ladders, stepladders, and stairs at least 10 times during shift.</li> <li>Requires the flexibility to bend/stoop and squat repetitively during shift.</li> <li>Requires the ability to regularly kneel repetitively during shift.</li> <li>Requires the ability to move in a 90-degree fashion on a repetitive basis during shift.</li> <li>Requires the ability to stretch/reach on a repetitive basis during shift.</li> <li>Requires the ability to walk extensively throughout the plant during shift.</li> <li>Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</li> </ul> <h4>Medical requirements:</h4> <ul> <li>Successfully complete and pass the medical and dental examinations as required for deployment to Iraq.</li> <li>Must maintain physical and dental requirements for the duration of the deployment.</li> </ul> <h4>Working and living conditions:</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to an extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit (50-55 degrees Celsius) during the summer months.</p> <p>Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods.</p> <p>Work schedules are a minimum of six days per week and ten hours per day, while some jobs have higher daily and weekly minimums.</p></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><br><b>Job Description<br></b>The Operations Manager will be based at one of the three Amentum sites in Iraq and serve the Operations and Maintenance Support Services (OMSS) contract in support of the U.S. Department of State. This position will be responsible for taking ownership of all site operational responsibilities to include directing the daily performance of the organization, planning, scheduling and training processes to meet the requirements of the contract. This position will report to the OMSS Program Manager. The duties and responsibilities listed below are representative of the nature and level of work assigned and are not necessarily all inclusive.<br><br><b>DUTIES:<br></b><br>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.<br><br>Comply with all Environmental Health &amp; Safety and Quality Assurance requirements and goals.<br><br>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.<br><br>Act as the Program Manager s principle operations representative.<br><br>Responsible for the management of all O&amp;M functions, including ensuring there are qualified personnel to meet staffing requirements, and the central planning, coordination, control, and actual performance of these functions.<br><br>Manage the O&amp;M and other assigned functions on site to ensure overall contract performance, which requires getting information to and from critical operating/supporting elements and directing/coordinating actions to ensure resources are fully utilized to properly perform the mission.<br><br>Monitor system readiness, identify problem areas, and respond to mission requirements to perform contract requirements.<br><br>Direct and monitor the preventive maintenance program; accept, process, coordinate, and assign work orders, projects, and large task assignments.<br><br>Control resources; monitor staff proficiency and qualifications; monitor staff endurance; monitor the locations and activities of assets; and coordinate the flow of information to and from O&amp;M staff.<br><br>Perform additional duties and projects as assigned.<br><b><br>REQUIRED</b>:<br><br>Minimum Acceptable Experience Level:<br><br>Ten (10) years O&amp;M experience compatible with program requirements.<br><br>Knowledge, Skills and Abilities:<br><br>Demonstrated working knowledge of Operations and Maintenance activities for a small plant, overseas, or military facility.<br><br>Demonstrated ability to manage required staff.<br><br>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.<br><br>Cross-cultural sensitivity with an international perspective.<br><br>Excellent organizational and time management skills.<br><br>Computer skills, specifically in Microsoft Word and Excel.<br><br>Ability to become an active and functioning member of a team.<br><br>Ability to be innovative and be an agent for change.<br><br>Expert communication skills to facilitate and disseminate information.<br><br>Education: A high school diploma or GED. A Bachelor s Degree in Business Management, Political Science, Organizational Effectiveness or similar discipline leading to a broad management background is preferred.<br><br>Passport, Licenses and Certifications: As part of pre-contingency requirements, by the time the visa process starts , candidates must possess a valid passport of with a minimum of 18 months remaining to expiration date with 8 blank pages. Valid drivers license.<br><br>Security Vetting: Must be able to obtain and maintain a Secret US Government Clearance. Note: US Citizenship is required to obtain a Secret Clearance.<br><br>Language Skills: Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.<br><br>Medical: Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.<br></div></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><p>Aerostat Operators provide Operations and Sustainment (O&amp;S) support for the Persistent Surveillance Systems Tethered (PSS-T) program in OCONUS site locations. PSS-T is comprised of former Persistent Ground Surveillance System (PGSS) and Persistent Threat Detection System (PTDS) programs. Essential Responsibilities: Aerostat Operators/User-level maintainers will participate in the overall, hands-on operation of the aerostat system including launch, in-flight, recovery, and moored activities. Candidates will perform all functions to operate the PGSS/PTDS, an aerostat mounted Intelligence, Surveillance, And Reconnaissance (ISR) platform, its Mobile Mooring Platform (MMP), Sensor Payload(s), communications and navigation systems as well as associated support equipment (Boom Lift, Forklift, All Terrain Vehicles (ATV's), and Electrical Power Generators). Additional responsibilities include performing analyses of system operations and candidates must have:</p><p>Knowledge of and experience in the operations of hardware systems and components. Experience in fault detection, isolation, and correction of hardware systems and individual components. Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards. Candidate will perform User-level maintenance functions include performing hands-on Preventative Maintenance Checks and Services (PMCS), troubleshooting, removing and replacing Line Replaceable Units (LRUs), and removing and replacing payloads. Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations. Tasks will be performed under direction of higher classified technicians and/or site personnel.</p><p>Physical Requirements: Requires the ability to regularly lift up to 50 lbs. Requires the ability to regularly climb extension ladders, roof ladder, stepladders, and stairs at least 10 times during shift. Requires the flexibility to bend/stoop, squat repetitive during shift. Requires the ability to regularly kneel repetitive for shift. Requires the ability to move in a 90-degree fashion on a repetitive basis for shift. Requires the ability to stretch/reach on a repetitive basis for shift. Requires the ability to walk extensively throughout the plant during shift. Requires the ability to interact with all clients in a professional and friendly manner despite periods of stress.</p><p>Medical Requirements Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for the duration of the deployment.</p><p>Working and Living Conditions: This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach PHONE_NUMBER degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to CENTCOM, EUCOM, and AFRICOM for extended periods. Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. #TAMOD</p></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph"></p><ul><li>High school diploma or equivalent is required.</li><li>Two-year Associate s degree in a technical field from an accredited college can substitute for work experience.</li><li>Must have an active Secret US Government Clearance.</li><li>Note: US Citizenship is required to obtain a Secret Clearance.</li><li>At least ONE (1) year previous Aerostat experience.</li><li>Certified and school trained on 34M and 74K.</li><li>Must have a valid U.S. passport with a minimum of one year remaining.</li><li>Must have valid US Driver's license.</li><li>Knowledge of and experience in the operations of hardware systems and components.</li><li>Experience in fault detection, isolation, and correction of hardware systems and individual components.</li><li>Ability to perform routine system maintenance and analysis functions including: hardware configurations; adding, removing and replacing hardware components; use of hardware and software diagnostic testing tools; reading of electronic circuit schematics; and repairing printed circuit boards.</li><li>Candidate must possess a diverse range of skills with the ability to quickly adapt to new situations.</li></ul><p></p></section>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph"><b>Job Description </b><div> <p>We are seeking a detail-oriented and organized Housekeeping Attendant to join our team in Baghdad, Iraq. In this role, you will be responsible for maintaining clean, safe, and welcoming environments across our facilities. The successful candidate will demonstrate exceptional attention to detail, strong time management skills, and a commitment to upholding our organization's cleanliness and safety standards.</p> <ul> <li>Perform daily cleaning and sanitization of assigned areas, including offices, common spaces, restrooms, and other facility areas</li> <li>Dust, vacuum, mop, and sweep floors using appropriate cleaning equipment and techniques</li> <li>Empty trash receptacles and dispose of waste in accordance with organizational and environmental guidelines</li> <li>Restock supplies such as paper towels, soap, and other restroom amenities</li> <li>Report maintenance issues, safety hazards, or equipment malfunctions to supervisory staff promptly</li> <li>Follow all health, safety, and chemical handling protocols to ensure a secure work environment</li> <li>Organize and maintain cleaning supply storage areas</li> <li>Collaborate with team members to ensure efficient completion of housekeeping tasks</li> <li>Respond professionally to requests from staff and visitors</li> <li>Maintain accurate records of cleaning schedules and completed tasks as required</li></ul></div></div></section><section><p class="heading">Desired Candidate Profile</p><p class="paragraph">Qualifications </p><div> <ul> <li>Proven experience in housekeeping, cleaning, or facility maintenance</li> <li>Strong attention to detail and commitment to quality standards</li> <li>Excellent time management and organizational skills</li> <li>Knowledge of cleaning chemicals, equipment, and safety procedures</li> <li>Ability to work independently and as part of a team</li> <li>Reliable attendance and punctuality</li> <li>Effective communication skills</li> <li>Willingness to follow instructions and adapt to changing priorities</li> <li>Familiarity with safety protocols and procedures</li> <li>Preferred: Previous experience in a corporate, hospitality, or institutional setting</li></ul></div><p></p></section>

<h3>Position Title</h3><p>Production Manager</p><h3>Department</h3><p>Production</p><h3>Reports To</h3><p>Plant Manager / General Manager</p><h3>Position Summary</h3><p>The Production Manager is responsible for planning, organizing, directing, and controlling all manufacturing operations to ensure production targets are achieved safely, efficiently, and in compliance with the company's quality, food safety, and operational standards. The role focuses on maximizing productivity, minimizing downtime and waste, optimizing resource utilization, and driving continuous improvement across all production activities.</p><h3>Key Responsibilities</h3><ul><li><p>Plan, organize, and manage all daily production operations to ensure the achievement of production targets.</p></li><li><p>Develop and implement daily, weekly, and monthly production plans in coordination with Sales, Supply Chain, Warehouse, Maintenance, and Quality departments.</p></li><li><p>Ensure production schedules are executed on time while meeting quality, safety, and cost objectives.</p></li><li><p>Supervise all manufacturing and packaging operations across production lines.</p></li><li><p>Monitor production performance, analyze operational data, and implement corrective actions to improve efficiency.</p></li><li><p>Maximize Overall Equipment Effectiveness (OEE) through continuous monitoring and performance improvement initiatives.</p></li><li><p>Identify production bottlenecks and implement solutions to minimize downtime and increase productivity.</p></li><li><p>Coordinate closely with the Maintenance Department to ensure equipment reliability and preventive maintenance execution.</p></li><li><p>Ensure the availability of raw materials and packaging materials to support uninterrupted production.</p></li><li><p>Optimize labor utilization and production resources to maximize operational efficiency.</p></li><li><p>Monitor production costs and implement initiatives to reduce waste and improve cost efficiency.</p></li><li><p>Ensure compliance with Good Manufacturing Practices (GMP), HACCP, ISO 22000, and all food safety and quality standards.</p></li><li><p>Develop, review, and enforce Standard Operating Procedures (SOPs) and work instructions.</p></li><li><p>Lead continuous improvement initiatives using Lean Manufacturing and best manufacturing practices.</p></li><li><p>Analyze production issues using Root Cause Analysis (RCA) and implement Corrective and Preventive Actions (CAPA).</p></li><li><p>Prepare and present daily, weekly, and monthly production performance reports to senior management.</p></li><li><p>Manage production budgets and support cost-saving initiatives.</p></li><li><p>Lead the recruitment, training, coaching, and performance evaluation of production supervisors and operators.</p></li><li><p>Foster a culture of teamwork, accountability, operational excellence, and continuous improvement.</p></li><li><p>Ensure full compliance with Occupational Health &amp; Safety regulations and company policies.</p></li><li><p>Conduct regular production meetings to review performance, address operational challenges, and align production priorities.</p></li><li><p>Participate in the planning, installation, commissioning, and startup of new production lines and manufacturing equipment.</p></li><li><p>Support new product development, process validation, and production trials.</p></li><li><p>Collaborate effectively with cross-functional departments to ensure smooth plant operations.</p></li><li><p>Perform any additional duties assigned by senior management that are related to the role.</p></li></ul><p></p><p><strong>Requirements</strong></p><h1>Job Requirements</h1><h3>Education</h3><ul><li><p>Bachelor's degree in Mechanical Engineering, Industrial Engineering, Production Engineering, Food Engineering, Chemical Engineering, or a related field.</p></li><li><p>A Master's degree in Industrial Management, Operations Management, Business Administration (MBA), or a related discipline is an advantage.</p></li></ul><h3>Experience</h3><ul><li><p>Minimum of <strong>10 years</strong> of experience in a food and beverage manufacturing environment.</p></li><li><p>At least <strong>5 years</strong> of experience in a Production Manager or equivalent leadership role.</p></li><li><p>Proven experience in managing high-speed production and packaging lines.</p></li><li><p>Experience in the production of bottled water, carbonated soft drinks, juices, energy drinks, or dairy beverages is highly preferred.</p></li><li><p>Experience in leading large production teams and managing multi-shift operations.</p></li></ul><h3>Technical Skills</h3><ul><li><p>Strong knowledge of Production Planning and Scheduling.</p></li><li><p>Experience with Lean Manufacturing, Continuous Improvement, and Waste Reduction initiatives.</p></li><li><p>Knowledge of Overall Equipment Effectiveness (OEE) and production performance analysis.</p></li><li><p>Experience in Root Cause Analysis (RCA) and Corrective &amp; Preventive Actions (CAPA).</p></li><li><p>Familiarity with Total Productive Maintenance (TPM) principles.</p></li><li><p>Strong understanding of Good Manufacturing Practices (GMP).</p></li><li><p>Knowledge of HACCP and ISO 22000 Food Safety Management Systems.</p></li><li><p>Experience in production cost control and productivity improvement.</p></li><li><p>Ability to develop and implement Standard Operating Procedures (SOPs).</p></li><li><p>Proficiency in ERP systems (Odoo, SAP, Oracle, Microsoft Dynamics, or similar).</p></li><li><p>Advanced proficiency in Microsoft Office, particularly Microsoft Excel.</p></li></ul><h3>Leadership &amp; Management Skills</h3><ul><li><p>Strong leadership and team management capabilities.</p></li><li><p>Excellent planning, organizing, and decision-making skills.</p></li><li><p>Ability to manage multiple priorities in a fast-paced manufacturing environment.</p></li><li><p>Strong analytical and problem-solving skills.</p></li><li><p>Excellent communication and interpersonal skills.</p></li><li><p>Ability to motivate, coach, and develop production teams.</p></li><li><p>Strong conflict resolution and performance management skills.</p></li><li><p>Results-oriented with a continuous improvement mindset.</p></li></ul><h3>Language Requirements</h3><ul><li><p>Fluent in Arabic.</p></li><li><p>Good command of English (spoken and written).</p></li></ul><h3>Computer Skills</h3><ul><li><p>Microsoft Office Suite (Advanced), especially Excel.</p></li><li><p>ERP Systems.</p></li><li><p>Power BI or other data visualization tools is an advantage.</p></li></ul><h3>Personal Attributes</h3><ul><li><p>High level of integrity and professionalism.</p></li><li><p>Strong sense of responsibility and accountability.</p></li><li><p>Ability to work under pressure and meet tight deadlines.</p></li><li><p>Excellent organizational and time management skills.</p></li><li><p>Adaptability and flexibility in a dynamic manufacturing environment.</p></li><li><p>Commitment to workplace safety, quality, and operational excellence.</p></li></ul><p></p>

<p><h4>Job summary</h4> <p>Amentum is seeking an aviation logistics specialist to support associated aircraft maintenance and parts inventory/supply opportunity in Martyr BG Ali Flaih Air Base, Iraq (Balad Air Base). The selected candidate will possess versatile skills and abilities to perform a wide range of responsibilities that encompass administration, logistics, inventory requirements, and reporting throughout the procurement lifecycle to ensure timelines and inventory are met to sustain program requirements. The aviation maintenance specialist is responsible for the overall management of material requirements and control necessary for program support on site at Martyr BG Ali Flaih Air Base, Iraq. Direct and manage all logistics. Will exercise sound judgement in making decisions by an understanding of operational requirements, the available resources and options, and analyzing the impacts – both short term and long term. This person shall have knowledge of, and ability to, validate aircraft parts status, inventory and storage of aircraft parts and all aspects of receiving and shipping out repairs. The candidate shall have experience updating aircraft data collection systems files. The selected candidate will consider and engage all stakeholders to help ensure the most effective solutions to problems and maintain open and continuous communications and updates as appropriate. The candidate shall be responsible in assisting with all parts logistics support operations, to include procurement – requisition process, inventory and storage and maintain status trackers. Will be the primary point of contact to ensure property records and required documentation are maintained and compliant with requirements. Compile and submit daily, weekly, and other reports as required. These can include and are not limited to accountability reports, parts trackers, and any other reporting as needed. The duties and responsibilities listed below are representative of the nature and level of work assigned.</p> <h4>Knowledge & skills</h4> <ul> <li>Initiates purchase requisitions, transportation of goods, allocation of procurements.</li> <li>Provide leadership with KPIs and necessary data to ensure adequate logistic support.</li> <li>Forecast and track procurements of all parts for purchase, repair and/or calibration for the health of the program.</li> <li>Work closely with business manager and program manager to manage contract material funding and special contract funds.</li> <li>Ensures DOT, IATA and other transportation compliance and requirements are adhered to in conjunction with the Amentum QCC Center and the program logistics manager.</li> <li>Ensures inventory control of government assets for the entire program.</li> <li>Uses supply chain software and resolves customer, shipment, and host country issues.</li> <li>Prepare all necessary correspondence required in the performance of this effort for government review, approval and release.</li> <li>Assist with establishing and maintaining written procedures for the proper control of government furnished property and contractor acquired property.</li> <li>Submit changes to established procedures ensuring all functions are consistent with written procedures.</li> <li>Establish and maintain stocking levels of government property to ensure materials are available to meet maintenance requirements.</li> <li>Maintain inventory at lowest possible cost to the government.</li> <li>Interface with program manager and logistics manager on issues involving procedural deficiencies.</li> <li>Maintain accurate records of government property throughout the acquisition and disposition process.</li> <li>Perform other duties as assigned.</li> </ul> <h4>Experience & education</h4> <ul> <li>Six (6) years of experience in supply chain/logistics/warehousing, experience in material management for government, DoD, or commercial supply chain.</li> <li>Two (2) years experience in aviation parts acquisition preferred.</li> <li>High school diploma or equivalent. Bachelor's degree preferred.</li> <li>FAA or DoD related aviation supply parts experience.</li> <li>Experience in and capable of managing supply functions such as storage, issue, inspection, research, repairable processing, shipping, receiving, warehousing, aircraft maintenance support, preparing requisitions, procurement, and accounting for aircraft parts and equipment.</li> <li>Ability to work in a fast-paced environment that requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> </ul> <h4>Compensation details</h4> <p>$38.00 per hour</p> <p>The compensation range or hourly rate listed for this position is provided as a good-faith estimate of what the company intends to offer for this role at the time this posting was issued. Actual compensation may vary based on factors such as job responsibilities, education, experience, skills, internal equity, market data, applicable collective bargaining agreements, and relevant laws.</p> <h4>Benefits overview</h4> <p>Our health and welfare benefits are designed to support you and your priorities. Offerings include:</p> <ul> <li>Health, dental, and vision insurance</li> <li>Paid time off and holidays</li> <li>Retirement benefits (including 401(k) matching)</li> <li>Educational reimbursement</li> <li>Parental leave</li> <li>Employee stock purchase plan</li> <li>Tax-saving options</li> <li>Disability and life insurance</li> <li>Pet insurance</li> </ul> <p>Note: Benefits may vary based on employment type, location, and applicable agreements. Positions governed by a collective bargaining agreement (CBA), the McNamara-O'Hara Service Contract Act (SCA), or other employment contracts may include different provisions/benefits.</p> <h4>Additional information</h4> <p>Original posting: 06/15/2026 - Until filled</p> <p>Amentum anticipates this job requisition will remain open for at least three days, with a closing date no earlier than three days after the original posting. This timeline may change based on business needs.</p> <p>Amentum is proud to be an equal opportunity employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law.</p></p><p></p>

<ul><li><strong>Job Title:</strong> Mechanical Engineer</li><li><strong>Location:</strong> Iraq</li><li><strong>Company:</strong> Iraqi National Food Industries Group</li><li>Job Summary</li><li>We are seeking a qualified Mechanical Engineer to join our team. The successful candidate will be responsible for the operation, maintenance, troubleshooting, and continuous improvement of production machinery and equipment within our manufacturing facilities.</li></ul><p>&nbsp;</p>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist® and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <p>We are seeking a detail-oriented and organized Housekeeping Attendant to join our team in Baghdad, Iraq. In this role, you will be responsible for maintaining clean, safe, and welcoming environments across our facilities. The successful candidate will demonstrate exceptional attention to detail, strong time management skills, and a commitment to upholding our organization's cleanliness and safety standards.</p> <p><strong>Responsibilities:</strong><br> <li>Perform daily cleaning and sanitization of assigned areas, including offices, common spaces, restrooms, and other facility areas</li> <li>Dust, vacuum, mop, and sweep floors using appropriate cleaning equipment and techniques</li> <li>Empty trash receptacles and dispose of waste in accordance with organizational and environmental guidelines</li> <li>Restock supplies such as paper towels, soap, and other restroom amenities</li> <li>Report maintenance issues, safety hazards, or equipment malfunctions to supervisory staff promptly</li> <li>Follow all health, safety, and chemical handling protocols to ensure a secure work environment</li> <li>Organize and maintain cleaning supply storage areas</li> <li>Collaborate with team members to ensure efficient completion of housekeeping tasks</li> <li>Respond professionally to requests from staff and visitors</li> <li>Maintain accurate records of cleaning schedules and completed tasks as required</li> </p> <p><strong>Qualifications:</strong><br> <li>Proven experience in housekeeping, cleaning, or facility maintenance</li> <li>Strong attention to detail and commitment to quality standards</li> <li>Excellent time management and organizational skills</li> <li>Knowledge of cleaning chemicals, equipment, and safety procedures</li> <li>Ability to work independently and as part of a team</li> <li>Reliable attendance and punctuality</li> <li>Effective communication skills</li> <li>Willingness to follow instructions and adapt to changing priorities</li> <li>Familiarity with safety protocols and procedures</li> <li>Preferred: Previous experience in a corporate, hospitality, or institutional setting</li> </p></p><p></p>

<p><h4>Duties</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals.</p> <p>Development and updating of the operations plan and maintenance program on a monthly basis.</p> <p>Record keeping for site data including as-builts, O&M manuals, commissioning documentation, design drawings, material and equipment cut sheets, etc.</p> <p>Develop and maintain the MSDS program and provide access as specified for all EC personnel.</p> <p>Develop, implement, and enforce a comprehensive safety program for all O&M Contractor staff, including periodic inspections and training programs.</p> <p>Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Review and maintain current information manuals for building operations and repair services and maintain accurate equipment and personnel records.</p> <p>Act as the Program Manager’s principal operations representative.</p> <p>Responsible for the management of all O&M functions, including ensuring there are qualified personnel to meet staffing requirements, and the central planning, coordination, control, and actual performance of these functions.</p> <p>Manage the O&M and other assigned functions on site to ensure overall contract performance, which requires getting information to and from critical operating/supporting elements and directing/coordinating actions to ensure resources are fully utilized to properly perform the mission.</p> <p>Monitor system readiness, identify problem areas, and respond to mission requirements to perform contract requirements.</p> <p>Direct and monitor the preventive maintenance program; accept, process, coordinate, and assign work orders, projects, and large task assignments.</p> <p>Control resources; monitor staff proficiency and qualifications; monitor staff endurance; monitor the location and activities of assets; and coordinate the flow of information to and from O&M staff.</p> <p>Perform additional duties and projects assigned.</p> <h4>Required</h4> <p><strong>Minimum acceptable experience level:</strong></p> <p>Minimum of 15 years’ experience in operations and maintenance services, with a minimum of 5 years’ experience in large facilities.</p> <p><strong>Knowledge, skills and abilities:</strong></p> <ul> <li>Demonstrated working knowledge of operations and maintenance activities for a small plant, overseas, or military facility.</li> <li>Demonstrated ability to manage required staff.</li> <li>Ability to work in a fast-paced environment requires handling multiple tasks at a given time and rapidly adapting to changing priorities and schedules.</li> <li>Cross-cultural sensitivity with an international perspective.</li> <li>Excellent organizational and time management skills.</li> <li>Computer skills, specifically in Microsoft Word and Excel.</li> <li>Ability to become an active and functioning member of a team.</li> <li>Ability to be innovative and be an agent for change.</li> <li>Expert communication skills to facilitate and disseminate information.</li> </ul> <p><strong>Education:</strong> A high school diploma or GED. A bachelor’s degree in business management, project management or similar discipline leading to a broad management background is preferred.</p> <p><strong>Passport, licenses and certifications:</strong> As part of pre-contingency requirements, by the time the visa process starts, candidates must possess a valid passport with a minimum of 18 months remaining until the expiration date with 8 blank pages. Valid drivers’ license.</p> <p><strong>Security vetting:</strong> Must be able to obtain and maintain a Secret US Government Clearance. Note: US citizenship is required to obtain Secret Clearance.</p> <p><strong>Language skills:</strong> Satisfactory English proficiency to meet job requirements and to adhere and comply with safety, health, and security measures.</p> <p><strong>Medical:</strong> Successfully complete and pass the medical and dental examinations as required by Amentum and our customer for deployment to Iraq. Must maintain physical and dental requirements for duration of deployment.</p> <h4>Desired</h4> <ul> <li>Relevant experience, skills and knowledge of electrical, mechanical/HVAC, power generation, water systems for a large facility are strongly preferred.</li> <li>Relevant overseas operations management experience.</li> <li>Previous out of home country experience and previous work experience in harsh environmental conditions are a plus.</li> <li>Experience working with Amentum.</li> </ul> <h4>Other responsibilities</h4> <p><strong>Safety</strong> - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks, and serving on safety committees and teams.</p> <p><strong>Quality</strong> - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities.</p> <p><strong>Procedure compliance</strong> - Each employee must read, understand, and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to job.</p> <h4>Working and living conditions</h4> <p>This position may be located in a war zone, in an environment with harsh and dangerous working and living conditions. While performing the duties of this job, the employee may regularly be exposed to extreme and austere desert-like environment. Temperatures can reach 120-130 degrees Fahrenheit/50-55 degrees Celsius during the summer months. Employees must be willing and able to perform regular job requirements in this austere, extreme environment, as well as willing and able to deploy to Iraq for extended periods.</p> <p>Work schedules are a minimum of 6 days per week and 10 hours per day, while some jobs have higher daily and weekly minimums. Employees must be willing and able to perform physical activities including, but not limited to, heavy lifting and moving of items, parts, assemblies, and equipment up to the safety regulation maximum; climbing in and out of equipment; crawling; and working outdoors.</p> <p>This includes being able to lift and carry 40 pounds of personal protective equipment for extended periods of time and being capable of running and ‘duck & cover’ during emergencies without putting oneself or others at risk.</p></p><p></p>

<p>Amentum is seeking a Welder to support maintenance and repair of various naval vessels such as 60-meter Offshore Support Vessels (OSV), 35-meter Patrol Boats (PB), 26-foot Defender Class, and Rigid Hull Inflatable Boats (RHIB). This position supports the Iraq Vessel Maintenance and Repair (VMR) program. This position is for a full-time, in-country position. The work location will be at the Iraqi Naval Base in the port of Umm Qasr, Iraq. Essential responsibilities and daily duties will include:</p><p>Perform various welding and structural repair tasks, including modifications, and fabrications to ensure the structural integrity of the naval vessels. Collaborate and coordinate with key members of the VMR support team to effectively plan, execute, and report tasking associated with OSV, PB and Defender class, and RHIB vessels to include the industrial manager, site manager, project manager, and other technical support personnel. Provide technical expertise to ensure the successful completion of all welding performed onboard OSV, PB and Defender class, and RHIB vessels. Identify all issues that impact safety, quality, or task schedules and notify the Industrial Manager, site manager, and project manager. Provide recommendations to the Industrial Manager, site manager, and project manager to mitigate identified issues. Develop solutions or recommendations to minimize system/equipment downtime and collaborate with both the customer and internal teams to ensure customer satisfaction. Assess work requirements to identify the parts and materials needed. Perform installation and configuration of equipment as required. Ensure that the equipment is properly installed, configured to perform optimally, and inspected for any defects. Participate in required meetings including weekly teleconferences and Work Definition Conferences with program stakeholders. Comply with all Contract Deliverable Requirement List (CRDL) requirements.</p><p><strong>Desired Candidate Profile</strong></p><ul><li>High School Diploma or GED equivalent.</li><li>Six (6) years of progressive experience is required in servicing ship or submarine systems, including the planning of field services.</li><li>Four (4) years of that experience is required to have been obtained in welding aboard ships or similar materials (aluminum and steel).</li><li>Must have specialized training in welding and understand implementation of various types of Non-Destructive Testing (NDT) and Objective Quality Evidence (OQE) in use for welding applications.</li><li>Ability to work independently and in a team environment.</li><li>Ability to communicate verbally and in writing.</li><li>Must be proficient in English.</li><li>Ability to travel CONUS and OCONUS.</li><li>Ability to obtain a country clearance and base pass authorization.</li><li>Note: US citizenship is required.</li><li>Ability to possess an active passport at least two years after arrival in Iraq.</li></ul><p>Preferred Qualifications : Foreign Military Sales experience.</p>

<p>Amentum is seeking a Welder to support maintenance and repair of various naval vessels such as 60-meter Offshore Support Vessels (OSV), 35-meter Patrol Boats (PB), 26-foot Defender Class, and Rigid Hull Inflatable Boats (RHIB). This position supports the Iraq Vessel Maintenance and Repair (VMR) program. This position is for a full-time, in-country position. The work location will be at the Iraqi Naval Base in the port of Umm Qasr, Iraq. Essential responsibilities and daily duties will include:</p><ul><li>Perform various welding and structural repair tasks, including modifications, and fabrications to ensure the structural integrity of the naval vessels.</li><li>Collaborate and coordinate with key members of the VMR support team to effectively plan, execute, and report tasking associated with OSV, PB and Defender class, and RHIB vessels to include the industrial manager, site manager, project manager, and other technical support personnel.</li><li>Provide technical expertise to ensure the successful completion of all welding performed onboard OSV, PB and Defender class, and RHIB vessels.</li><li>Identify all issues that impact safety, quality, or task schedules and notify the Industrial Manager, site manager, and project manager.</li><li>Provide recommendations to the Industrial Manager, site manager, and project manager to mitigate identified issues.</li><li>Develop solutions or recommendations to minimize system/equipment downtime and collaborate with both the customer and internal teams to ensure customer satisfaction.</li><li>Assess work requirements to identify the parts and materials needed.</li><li>Perform installation and configuration of equipment as required. Ensure that the equipment is properly installed, configured to perform optimally, and inspected for any defects.</li><li>Participate in required meetings including weekly teleconferences and Work Definition Conferences with program stakeholders.</li><li>Comply with all Contract Deliverable Requirement List (CRDL) requirements.</li></ul><p><strong>Desired Candidate Profile</strong></p><p>Minimum Requirements:</p><ul><li>High School Diploma or GED equivalent.</li><li>Six (6) years of progressive experience is required in servicing ship or submarine systems, including the planning of field services.</li><li>Four (4) years of that experience is required to have been obtained in welding aboard ships or similar materials (aluminum and steel).</li><li>Must have specialized training in welding and understand implementation of various types of Non-Destructive Testing (NDT) and Objective Quality Evidence (OQE) in use for welding applications.</li><li>Ability to work independently and in a team environment.</li><li>Ability to communicate verbally and in writing. Must be proficient in English.</li><li>Ability to travel CONUS and OCONUS.</li><li>Ability to obtain a country clearance and base pass authorization. Note: US citizenship is required.</li><li>Ability to possess an active passport at least two years after arrival in Iraq.</li></ul><p>Preferred Qualifications:</p><ul><li>Foreign Military Sales experience.</li></ul>

<p><h4>Job Description</h4> <p>Amentum is seeking a welder to support maintenance and repair of various naval vessels such as 60-meter offshore support vessels (OSV), 35-meter patrol boats (PB), 26-foot defender class, and rigid hull inflatable boats (RHIB). This position supports the Iraq Vessel Maintenance and Repair (VMR) program. This position is for a full-time, in-country position. The work location will be at the Iraqi Naval Base in the port of Umm Qasr, Iraq.</p> <h4>Essential responsibilities and daily duties will include:</h4> <ul> <li>Perform various welding and structural repair tasks, including modifications and fabrications to ensure the structural integrity of the naval vessels.</li> <li>Collaborate and coordinate with key members of the VMR support team to effectively plan, execute, and report tasking associated with OSV, PB and defender class, and RHIB vessels to include the industrial manager, site manager, project manager, and other technical support personnel.</li> <li>Provide technical expertise to ensure the successful completion of all welding performed onboard OSV, PB and defender class, and RHIB vessels.</li> <li>Identify all issues that impact safety, quality, or task schedules and notify the industrial manager, site manager, and project manager.</li> <li>Provide recommendations to the industrial manager, site manager, and project manager to mitigate identified issues.</li> <li>Develop solutions or recommendations to minimize system/equipment downtime and collaborate with both the customer and internal teams to ensure customer satisfaction.</li> <li>Assess work requirements to identify the parts and materials needed.</li> <li>Perform installation and configuration of equipment as required. Ensure that the equipment is properly installed, configured to perform optimally, and inspected for any defects.</li> <li>Participate in required meetings including weekly teleconferences and work definition conferences with program stakeholders.</li> <li>Comply with all contract deliverable requirement list (CRDL) requirements.</li> </ul> <h4>Minimum requirements:</h4> <ul> <li>High school diploma or GED equivalent.</li> <li>Six (6) years of progressive experience is required in servicing ship or submarine systems, including the planning of field services.</li> <li>Four (4) years of that experience is required to have been obtained in welding aboard ships or similar materials (aluminum and steel).</li> <li>Must have specialized training in welding and understand implementation of various types of non-destructive testing (NDT) and objective quality evidence (OQE) in use for welding applications.</li> <li>Ability to work independently and in a team environment.</li> <li>Ability to communicate verbally and in writing. Must be proficient in English.</li> <li>Ability to travel CONUS and OCONUS.</li> <li>Ability to obtain a country clearance and base pass authorization. Note: US citizenship is required.</li> <li>Ability to possess an active passport at least two years after arrival in Iraq.</li> </ul> <h4>Preferred qualifications:</h4> <ul> <li>Foreign military sales experience.</li> </ul></p><p></p>

<section><p class="heading jdMain">Job Description</p><p class="heading">Roles &amp; Responsibilities</p><div class="paragraph">Abwaab | Office Operations and Facilities Specialist <p></p> <p>Location - Baghdad, Iraq</p> <p> <br> </p> <p><b>Role Overview:</b></p> <p> <br> </p> <p>We are seeking a highly organized and proactive Office Operations and Facilities Specialist to take full ownership of the day-to-day operations, facilities management, and overall readiness of our Iraq office building. This role is responsible for ensuring smooth office operations across all three floors, maintaining workplace standards, managing office facilities and services, and supporting a productive, safe, and organized environment for employees and visitors.</p> <p>The ideal candidate is detail-oriented, highly organized, and capable of managing multiple priorities while coordinating effectively with employees, vendors, service providers, and internal stakeholders. The successful candidate will demonstrate strong ownership, accountability, and a hands-on approach to maintaining operational excellence, office functionality, and workplace standards.</p> <p> <br> </p> <p> <br> </p> <p><b>Responsibilities</b>:</p> <p> <br> </p> <p>Office Operations &amp; Facility Management:</p> <ul> <li> <p>Take ownership of the office building and ensure smooth day-to-day operations across all floors.</p> </li> <li> <p>Monitor and maintain office readiness, organization, cleanliness, and operational efficiency.</p> </li> <li> <p>Coordinate and follow up on office maintenance requirements, repairs, and technical issues.</p> </li> <li> <p>Ensure all office areas remain functional, professional, organized, and aligned with company standards.</p> </li> <li> <p>Coordinate with building management, service providers, and vendors to ensure uninterrupted office operations. </p> </li> <li> <p>Ensure all office areas remain functional, professional, organized, and aligned with company standards. </p> </li> </ul> <p> <br> </p> <p>Inventory &amp; Office Supplies Management:</p> <ul> <li> <p>Manage office inventory, supplies, consumables, and storage areas efficiently.</p> </li> <li> <p>Monitor stock levels and ensure timely replenishment of office and operational supplies.</p> </li> <li> <p>Maintain organized inventory tracking and accurate records of office assets and supplies.</p> </li> <li> <p>Coordinate procurement requests and vendor follow-up when needed. </p> </li> </ul> <p>Office Hygiene &amp; Workplace Standards </p> <ul> <li> <p>Ensure high standards of office hygiene, cleanliness, and workplace presentation.</p> </li> <li> <p>Coordinate with cleaning staff and service providers to maintain office readiness throughout the day.</p> </li> <li> <p>Conduct regular inspections and follow up on operational, maintenance, or hygiene concerns. </p> </li> </ul> <p>Stakeholder Coordination &amp; Communication </p> <ul> <li> <p>Coordinate effectively with employees, vendors, building management, and different departments.</p> </li> <li> <p>Support office-related requests while maintaining operational priorities and service standards.</p> </li> <li> <p>Communicate professionally and effectively to ensure smooth coordination and timely issue resolution. </p> </li> </ul> <p>Administrative &amp; Operational Support </p> <ul> <li> <p>Support day-to-day office administration and operational activities.</p> </li> <li> <p>Assist in organizing office logistics, meetings, company events, and operational requirements when needed.</p> </li> <li> <p>Maintain proper documentation, trackers, records, and reports related to office operations, inventory, and facilities.</p> </li> <li> <p>Support the implementation and improvement of office processes, procedures, and workplace standards. </p> </li> </ul> <p> <br> </p> <p><b>Requirements and skills:</b></p> <p> <br> </p> <ul> <li> <p>2 4 years of experience in office administration, facilities coordination, office operations, workplace management, or related roles.</p> </li> <li> <p>Strong organizational and time management skills with high attention to detail.</p> </li> <li> <p>Excellent communication and stakeholder management skills.</p> </li> <li> <p>Ability to manage multiple tasks and priorities in a fast-paced environment.</p> </li> <li> <p>Experience handling inventory management, office supplies, vendor coordination, and facilities-related activities.</p> </li> <li> <p>Strong sense of ownership, accountability, and operational follow-up.</p> </li> <li> <p>Ability to work independently and maintain a professional and organized office environment.</p> </li> <li> <p>Proficiency in Microsoft Office and Google Workspace tools.</p> </li> <li> <p>Bachelor's degree or diploma in Business Administration, Facilities Management, Operations, or a related field is preferred. </p> </li> </ul> <div></div></div></section>

<p><h4>Duties:</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Serve as a structural and airport firefighter, first responder, and HAZMAT responder on a scheduled rotation.</p> <p>Participate in fire and emergency services activities including: fire suppression, EMS, rescue, public assistance, fire investigation, fire prevention, pre-fire planning, fire company training, public education, clinical training, and routine maintenance of apparatus, equipment, and facilities.</p> <p>Support emergency management functions as needed.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Other Duties:</h4> <p>This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job.</p> <p>Duties, responsibilities, and</p><p></p>

<p><h4>Company description</h4> <p>Join a hotel that is a member of the Accor network, whose group brings together more than 45 brands, 5,500 hotels, 10,000 restaurants and lifestyle destinations. Here, we believe in you and what you bring to the table. There are many opportunities for development and advancement. Every gesture, every smile, every action, contributes to creating a positive and memorable impact for our customers, our colleagues and also for our planet. Together, we embody the vision of responsible hospitality.</p> <p>Take the opportunity to become a Heartist® and let your heart guide you in this world where life beats faster.</p> <h4>Job description</h4> <p>We are seeking an experienced and visionary Executive Housekeeper to lead our housekeeping operations in Baghdad, Iraq. In this pivotal role, you will oversee all aspects of our housekeeping department, ensuring exceptional cleanliness, presentation, and guest satisfaction across all facilities. As an assertive and organized leader, you will manage a dedicated team while maintaining the highest standards of operational excellence and compliance. This position offers the opportunity to make a meaningful impact through innovative approaches to facility management and a commitment to supporting your team's professional growth.</p> <ul> <li>Oversee and manage the daily operations of the housekeeping department, ensuring seamless coordination and efficient workflow</li> <li>Supervise, train, schedule, and evaluate housekeeping staff with a supportive and inclusive approach that fosters professional development</li> <li>Establish and implement comprehensive cleaning procedures, quality control measures, and performance standards that exceed industry expectations</li> <li>Conduct regular inspections of guest rooms, public areas, and facilities to ensure they consistently meet cleanliness and presentation standards</li> <li>Manage departmental budgets, control expenses, and optimize resource allocation to achieve organizational goals</li> <li>Monitor and maintain accurate inventory of linens, cleaning supplies, guest amenities, and equipment</li> <li>Collaborate effectively with Front Office, Maintenance, Laundry, and other departments to ensure integrated and efficient operations</li> <li>Address guest complaints and special requests with empathy and professionalism, resolving issues promptly and transparently</li> <li>Ensure full compliance with local health, safety, sanitation, and environmental regulations specific to Baghdad operations</li> <li>Maintain detailed records of staff attendance, inventory levels, room inspections, maintenance requests, and departmental metrics</li> <li>Analyze performance data and prepare comprehensive departmental reports to support decision-making and continuous improvement</li> <li>Demonstrate flexibility and resilience in adapting to operational challenges while maintaining service quality and team morale</li> </ul> <h4>Qualifications</h4> <ul> <li>Minimum 7–10 years of progressive housekeeping experience with demonstrated supervisory and managerial responsibilities</li> <li>Strong expertise in housekeeping operations, advanced cleaning techniques, and industry best practices</li> <li>Proven ability to manage budgets, control expenses, and optimize departmental resources effectively</li> <li>Proficiency with property management systems (PMS) and housekeeping management software</li> <li>Comprehensive knowledge of health, safety, sanitation, and environmental compliance standards</li> <li>Excellent leadership and team motivation skills with the ability to inspire and develop staff</li> <li>Strong written and verbal communication skills in English; knowledge of Arabic is advantageous</li> <li>Analytical mindset with the ability to interpret performance metrics and implement data-driven improvements</li> <li>Problem-solving abilities and decisive decision-making skills in fast-paced environments</li> <li>Detail-oriented approach with exceptional organizational and time management capabilities</li> <li>Ability to work flexibly and adapt to changing priorities while maintaining service excellence</li> <li>Customer-focused mindset with a commitment to guest satisfaction and service quality</li> </ul></p><p></p>

<p><h4>Duties:</h4> <p>Responsible for maintaining a safe workplace and ensuring that safety is the highest priority in the workplace.</p> <p>Comply with all Environmental Health & Safety and Quality Assurance requirements and goals. Provide information and materials to these divisions as necessary to ensure adequate and legal documentation.</p> <p>Serve as a structural and airport firefighter, first responder, and HAZMAT responder on a scheduled rotation.</p> <p>Participate in fire and emergency services activities including: fire suppression, EMS, rescue, public assistance, fire investigation, fire prevention, pre-fire planning, fire company training, public education, clinical training, and routine maintenance of apparatus, equipment, and facilities.</p> <p>Support emergency management functions as needed.</p> <p>Perform additional duties and projects as assigned.</p> <h4>Other Duties:</h4> <p>This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job.</p> <p>Duties, responsibilities, and activities</p><p></p>